f76ce3b475
Only poll for bell completion if we're calling in from cnbell(). Fixes
...
a problem reported by Lennart Augustsson.
2000-03-10 06:10:34 +00:00
cf32e2713c
Adopt the macro name change of if_ieee80211.h.
...
also fixed the value for receiving packets in infrastructure mode,
while no one has been tested with.
2000-03-10 05:47:42 +00:00
0391e3393f
Slight change to the SROM size printf.
2000-03-10 02:46:39 +00:00
9f86839658
change Mb/s to MB/s (Megabit to megabyte).
2000-03-09 23:19:26 +00:00
c70220f2a2
Move PCIIDE_CHANNEL_NAME macro to pciidereg.h.
2000-03-09 20:26:31 +00:00
0542cec055
put "#ifdef __alpha__" around "alpha_mb()" calls
...
(I know the driver is useless without console initialisation, but it
should at least compile.)
2000-03-09 18:40:36 +00:00
24ea2caf14
regen
2000-03-09 09:53:03 +00:00
3abb87c0f5
Add Conexant SoftK56 PCI Software Modem, Sony CXD3222 OHCI i.LINK(IEEE 1394)
...
PCI controller, Sony Memory Stick I/F Controller
Ids send by John Hawkinson in kern/9588
2000-03-09 09:50:49 +00:00
7e567738f2
support rfact. use manufac. suggested resistor values by default
...
clean up some comments
2000-03-09 04:20:58 +00:00
7e6d7b8613
use bus independent probe
2000-03-09 04:19:03 +00:00
e0d3ede01c
Get the status right when a polled transfer times out.
2000-03-08 15:34:10 +00:00
07574c3239
Add a debug message.
2000-03-08 15:33:38 +00:00
45f32a77f5
Clean up code a little and add some more debug messages.
2000-03-08 15:33:24 +00:00
af00b7b880
split probe into generic and bus specific
2000-03-07 18:39:14 +00:00
4398e0bd07
Fix CardBus device number. Though CardBus device number should be 0,
...
the value of bridge's function number was assigned to the device
number.
2000-03-07 09:36:52 +00:00
c1b54794fc
Add missing `cnt++'.
2000-03-07 03:37:39 +00:00
7ce8a9f46b
Also, fix indentation in previous commit.
2000-03-07 03:34:52 +00:00
7c57ac56d7
Cleanup a couple of function declarations. No functional changes.
2000-03-07 03:09:47 +00:00
51ffb0924c
Create a new rf_close_component() to handle vnode operations for closing
...
components. Teach rf_UnconfigureVnodes() how to use it, and tell
the copyback and reconstruction code about it too.
2000-03-07 02:59:50 +00:00
ddebc1cad0
Move rf_UnconfigureVnodes to rf_netbsdkintf.c where it will be more at home.
...
Add prototype to rf_kintf.h, and nuke old prototypes from rf_disks.c and
rf_driver.c .
2000-03-07 02:28:05 +00:00
33a55d022b
rf_ protect the component label print routine, and make it more easily
...
available to the rest of RAIDframe.
2000-03-07 02:12:13 +00:00
dbf5d1f7a6
Nuke unused code.
2000-03-07 01:54:29 +00:00
dfaacf6eab
Fix bug in previous.
2000-03-07 01:08:55 +00:00
8f8714687b
Reenable the code that clears SLEEP and SNOOZE from the CFDA register.
2000-03-07 01:08:47 +00:00
6cc1408bca
Only print SROM size if TLP_DEBUG.
2000-03-07 01:06:12 +00:00
4887635a10
A few things:
...
* Take advantage of the tulip_read_srom() changes.
* Don't frob the so-called `CFDA' register. We're really looking for the
PMCSR, which is in a different location anyway.
* Don't panic if we detach an interface for which we never called tlp_attach().
2000-03-07 00:43:36 +00:00
5eee9ca94c
Determine the size of the SROM by probing the chip using the standard Microwire
...
protocol. Eliminates the need for srom_quirks and some other trash.
2000-03-07 00:39:17 +00:00
064b1bd2e9
Fix obvious typo.
2000-03-07 00:33:13 +00:00
8b13d21260
Do a CARDBUS_BM_ENABLE to be sure.
2000-03-07 00:32:52 +00:00
de8398315a
Fix an obvious bug that caused I/O space to never be freed.
...
Also, don't use rbus_space_free() directly.
2000-03-07 00:31:46 +00:00
bcdcb370e5
Called the power function even for 5V cards. This at least gives the power
...
a chance to stabilize before we frob the card.
2000-03-07 00:30:57 +00:00
42144199a1
- Make the pcppi and pckbd drivers cooperate a little more -- pckbd provides
...
a call to hook up a bell-ringer (since the keyboard itself has no bell).
This eliminates the need for #ifdefs for the bell-ringer in the pckbd
driver.
- Add cnbell() support to pckbd.
2000-03-06 21:40:08 +00:00
da4dc67d3e
Add cnbell() support.
2000-03-06 21:37:16 +00:00
a183d34f04
- Implement cnbell() -- ring the console bell. The cn_bell entrypoint
...
is optional.
- Add cn_bell to statically allocated consdevs as appropriate.
2000-03-06 21:36:05 +00:00
91c44a72b8
Set ifp->if_baudrate as appropriate.
2000-03-06 21:02:37 +00:00
a6f861574a
No longer necessary to futz with ifp->if_baudrate here.
2000-03-06 21:02:00 +00:00
41aade98ba
Generate better error codes on bulk write.
2000-03-06 20:59:17 +00:00
119a2a3a80
Remove irrelevant comment.
2000-03-06 20:58:39 +00:00
e0cb11e30e
Use macros from usb.h instead masking out bit explicitely.
2000-03-06 20:58:18 +00:00
ad61d101be
Factor out the tick handling code into a common function, and send
...
rt_ifmsg's when the link speed or link status changes.
2000-03-06 20:56:56 +00:00
c34cce88c4
Add support for the AMD 756 DMA/UDMA IDE controller, provided in
...
PR kern/9536 by Dave Sainty.
2000-03-06 18:02:26 +00:00
68484a4ad9
- Remove redundant assignment.
...
- Don't disestablish shutdown hook if we can't establish it.
- Noneed to manage resouces individually.
2000-03-06 10:31:27 +00:00
9066b12bbb
Remove redundant assignment.
2000-03-06 10:21:46 +00:00
d97becf28e
Make Creative Soundblaster PCI 128's work -- from Masahiro Ishiyama
...
Note that on device close, there's a sharp pop that probably should be fixed.
Note also that the device is hanging the machine at times for brief
periods inside audio.c::audiogetinfo(), but I haven't yet figured out
why.
2000-03-06 03:18:11 +00:00
e65044e30d
Get rid of hook for dk_establish() - pmax will now use device_register().
2000-03-06 03:08:32 +00:00
c74ea28746
Support the W89C940F alternative ID.
2000-03-06 03:07:08 +00:00
9e870c5a88
Regenerate from pcidevs.
2000-03-06 02:32:31 +00:00
1a0eab6fa3
Add SYMPHONY 83C553 PCI-ISA bridge.
...
Add alternative ID for Winbond W89C940F.
2000-03-06 02:31:19 +00:00
d610ec4cb0
Add Norwegian keymap from Haavard Lygre.
2000-03-05 08:56:53 +00:00
23af6e53fd
Moved things around a bit so that TGA2 can be used as a console.
...
Addresses PR: port-alpha/9542
2000-03-05 07:57:52 +00:00
1dfdd10eae
I got the mode sense bits of the monitor wrong they needed a twiddle (~).
2000-03-05 02:30:57 +00:00
c98328e9df
Regen from "pcidevs".
2000-03-04 13:24:24 +00:00
947ec630de
Add AMD Athlon chipset related devices. Patch supplied by Dave Sainty in
...
PR kern/9533.
2000-03-04 13:23:26 +00:00
f939818426
Added basic TGA2 support to the TGA driver. Abstracted the RAMDAC
...
code out into ../ic/bt485.c. Disabled tga_bt463.c, which we don't
currently support.
2000-03-04 10:27:59 +00:00
b16807c51a
Graphics card independant Bt485 code, derived from dev/pci/tga_bt485.c.
2000-03-04 10:25:57 +00:00
c4019af322
Definitions of standard TGA monitors as used by DEC.
2000-03-04 10:25:07 +00:00
7428bb6ffd
Definition of struct monitor, which contains syncs, and dot clocks.
2000-03-04 10:24:34 +00:00
fec44d6f55
Header for a generic RAMDAC that can be reused between different
...
graphics cards.
2000-03-04 10:23:39 +00:00
1231bd6d14
Umm... don't allow attempts to configure the same RAID device multiple times.
...
The check was there, but the return() was missing :(
2000-03-04 06:03:21 +00:00
3b06f6f887
Fix boot device detection. Device probes are not done when adapters are
...
configured, but after all adapters have been configured. When multiple
adapters are present, only the last configured adapter could be matched
to the boot device slot. The adapter attach routines now check if that
adapter slot matches the boot device slot and saves the softc pointer
for that controller. Then when the disks are configured, dk_establish()
matches the appropriate controller.
2000-03-04 05:43:51 +00:00
0049933f0f
Reorganize some comments.
2000-03-04 04:22:34 +00:00
194aba4e41
Garbage collect the (already disabled) "random" queue type.
2000-03-04 03:27:13 +00:00
612e2e8f92
Nuke an unneeded #define.
2000-03-04 03:22:17 +00:00
d8bf2eb8ef
- we didn't write enable toe config1-3 registers before trying to set the
...
media.
- read out original settings to find out what the defaults (EEPROM) for this
board were, instad of hardwiring to auto.
XXX the first might need further refinement. At least on my boards, 10baseT
doesn't work for 10baseT, only AUTO.
2000-03-03 21:37:18 +00:00
88a8d06a0b
Use the common disk allocation code, rather doing things the old way.
2000-03-03 03:47:17 +00:00
142175b1a1
Minor formatting cleanup.
2000-03-03 03:10:03 +00:00
7b1139520e
More minor cleanup.
2000-03-03 02:04:48 +00:00
87f46374bb
Minor cleanup. No functional changes.
2000-03-03 01:46:36 +00:00
2dda67d4a2
Fix typo in argument to ratecheck().
2000-03-02 15:49:29 +00:00
d6c4ac7ff2
Use ratecheck() to limit error messages on disconnect.
...
Break out some common functionality.
2000-03-02 12:37:50 +00:00
e924f6f853
Minor cleanups.
2000-03-02 10:29:22 +00:00
48721f291a
Fix typo and thinko in previous commit.
2000-03-02 05:54:22 +00:00
027db8bf87
Add ifmedia support so that dhcp happy. Also, add nwid support.
2000-03-02 05:00:47 +00:00
a5921b902e
Check if device is active in the interrupt handler and the one second
...
tick handler.
2000-03-02 01:21:56 +00:00
285a315e99
Simplify the winlist code.
2000-03-01 23:40:26 +00:00
ac1b683642
Amend previous; pay attention to EX_CONF_MII on deactivate, too.
2000-03-01 20:53:11 +00:00
448dfa4249
Only detach PHYs if we have MII in the first place, and remove a bunch
...
of #if 0'd code which was copied from the Tulip driver.
2000-03-01 20:51:50 +00:00
54e0e80815
Cosmetic change.
2000-03-01 20:50:56 +00:00
08483fcddc
When unmapping these on detach, pass the BAR to unmap (not the type of
...
the BAR!!)
2000-03-01 20:50:37 +00:00
3218dd992d
Protect the use of bpf_mtap so bpf isn't needed.
...
aue: Limit the number of error messages at disconnect by using ratecheck().
2000-03-01 19:00:51 +00:00
ba4e755a9c
Change the cmd argument in {audio,mixer}_ioctl() to u_long.
2000-03-01 00:44:35 +00:00
7d05674ba7
Distinguish between device and interface classes.
...
(I finally found a document that said that they were different.)
2000-02-29 21:37:00 +00:00
a6a5be8ccf
This driver also handles the 3COM 3COM HomeConnect Ethernet USB Adapter
...
(3C460), rev 1.00/2.05
2000-02-29 19:08:09 +00:00
b95fbdaeb7
Regen
2000-02-29 19:07:33 +00:00
eff003f7ce
add product ID for 3COM 3COM HomeConnect Ethernet USB Adapter (3C460),
...
rev 1.00/2.05
2000-02-29 19:06:40 +00:00
8cde772948
Oops.. Need to note the parity status when we unconfigure.
...
Noted by Aaron J. Grier. (Thanks!)
2000-02-29 16:54:29 +00:00
c09a9a072f
Oops, pasto.
2000-02-29 11:14:46 +00:00
d788e0dbad
Make sure to initialize xs->req_sense_length (to 0). This appears to be
...
a historical leftover, and very few drivers actually look at it. But the
PCI `ncr' driver does, and if this field is not initialized to its default
value, that driver will fall over flat on its face when it attempts to get
sense data from a target.
2000-02-28 17:44:20 +00:00
32817a3257
WSMOUSE_SCALIBCOORDS had not worked because ioctrl code was wrong.
2000-02-28 12:34:31 +00:00
c627d45cc3
(fxp_init): don't clear the FXPF_MII flag as this results in a panic
...
when detaching
2000-02-28 10:16:17 +00:00
86ae2ab1fc
Add ADEV_NOSENSE quirk for HITACHI CDR-7730.
...
Patch sent by Hume Smith in kern/9489.
2000-02-28 09:46:25 +00:00
a87f80ad5f
Give the VPP bits better names.
2000-02-28 07:33:08 +00:00
17f933f6ce
Add missing break that hosed multicast.
2000-02-28 06:44:52 +00:00
d2b929f576
Fix naming think-o.
2000-02-28 05:30:19 +00:00
8841a11f4d
- Disestablish an interrupt if failed to enable the card.
...
- If card isn't enabled, just set given information into softc. Addresses
PR#9457.
- Some cleanups and cosmetic changes.
2000-02-27 23:10:51 +00:00
71df610aeb
Remove no longer necessary workaround for hpcmips.
2000-02-27 22:57:20 +00:00
10d9610df8
Make this driver actually work in NetBSD. From Castor Fu <castor@geocast.com>
2000-02-27 22:15:24 +00:00
7b4eccb432
Use DPRINTF for debug messages.
2000-02-27 21:06:55 +00:00
739151c214
Regen.
2000-02-27 20:44:22 +00:00
741c59a303
Add the QuickShot Strikepad game-pad.
2000-02-27 20:43:53 +00:00
thorpej