1dfdd10eae
I got the mode sense bits of the monitor wrong they needed a twiddle (~).
2000-03-05 02:30:57 +00:00
c98328e9df
Regen from "pcidevs".
2000-03-04 13:24:24 +00:00
947ec630de
Add AMD Athlon chipset related devices. Patch supplied by Dave Sainty in
...
PR kern/9533.
2000-03-04 13:23:26 +00:00
f939818426
Added basic TGA2 support to the TGA driver. Abstracted the RAMDAC
...
code out into ../ic/bt485.c. Disabled tga_bt463.c, which we don't
currently support.
2000-03-04 10:27:59 +00:00
b16807c51a
Graphics card independant Bt485 code, derived from dev/pci/tga_bt485.c.
2000-03-04 10:25:57 +00:00
c4019af322
Definitions of standard TGA monitors as used by DEC.
2000-03-04 10:25:07 +00:00
7428bb6ffd
Definition of struct monitor, which contains syncs, and dot clocks.
2000-03-04 10:24:34 +00:00
fec44d6f55
Header for a generic RAMDAC that can be reused between different
...
graphics cards.
2000-03-04 10:23:39 +00:00
1231bd6d14
Umm... don't allow attempts to configure the same RAID device multiple times.
...
The check was there, but the return() was missing :(
2000-03-04 06:03:21 +00:00
3b06f6f887
Fix boot device detection. Device probes are not done when adapters are
...
configured, but after all adapters have been configured. When multiple
adapters are present, only the last configured adapter could be matched
to the boot device slot. The adapter attach routines now check if that
adapter slot matches the boot device slot and saves the softc pointer
for that controller. Then when the disks are configured, dk_establish()
matches the appropriate controller.
2000-03-04 05:43:51 +00:00
0049933f0f
Reorganize some comments.
2000-03-04 04:22:34 +00:00
194aba4e41
Garbage collect the (already disabled) "random" queue type.
2000-03-04 03:27:13 +00:00
612e2e8f92
Nuke an unneeded #define.
2000-03-04 03:22:17 +00:00
d8bf2eb8ef
- we didn't write enable toe config1-3 registers before trying to set the
...
media.
- read out original settings to find out what the defaults (EEPROM) for this
board were, instad of hardwiring to auto.
XXX the first might need further refinement. At least on my boards, 10baseT
doesn't work for 10baseT, only AUTO.
2000-03-03 21:37:18 +00:00
88a8d06a0b
Use the common disk allocation code, rather doing things the old way.
2000-03-03 03:47:17 +00:00
142175b1a1
Minor formatting cleanup.
2000-03-03 03:10:03 +00:00
7b1139520e
More minor cleanup.
2000-03-03 02:04:48 +00:00
87f46374bb
Minor cleanup. No functional changes.
2000-03-03 01:46:36 +00:00
2dda67d4a2
Fix typo in argument to ratecheck().
2000-03-02 15:49:29 +00:00
d6c4ac7ff2
Use ratecheck() to limit error messages on disconnect.
...
Break out some common functionality.
2000-03-02 12:37:50 +00:00
e924f6f853
Minor cleanups.
2000-03-02 10:29:22 +00:00
48721f291a
Fix typo and thinko in previous commit.
2000-03-02 05:54:22 +00:00
027db8bf87
Add ifmedia support so that dhcp happy. Also, add nwid support.
2000-03-02 05:00:47 +00:00
a5921b902e
Check if device is active in the interrupt handler and the one second
...
tick handler.
2000-03-02 01:21:56 +00:00
285a315e99
Simplify the winlist code.
2000-03-01 23:40:26 +00:00
ac1b683642
Amend previous; pay attention to EX_CONF_MII on deactivate, too.
2000-03-01 20:53:11 +00:00
448dfa4249
Only detach PHYs if we have MII in the first place, and remove a bunch
...
of #if 0'd code which was copied from the Tulip driver.
2000-03-01 20:51:50 +00:00
54e0e80815
Cosmetic change.
2000-03-01 20:50:56 +00:00
08483fcddc
When unmapping these on detach, pass the BAR to unmap (not the type of
...
the BAR!!)
2000-03-01 20:50:37 +00:00
3218dd992d
Protect the use of bpf_mtap so bpf isn't needed.
...
aue: Limit the number of error messages at disconnect by using ratecheck().
2000-03-01 19:00:51 +00:00
ba4e755a9c
Change the cmd argument in {audio,mixer}_ioctl() to u_long.
2000-03-01 00:44:35 +00:00
7d05674ba7
Distinguish between device and interface classes.
...
(I finally found a document that said that they were different.)
2000-02-29 21:37:00 +00:00
a6a5be8ccf
This driver also handles the 3COM 3COM HomeConnect Ethernet USB Adapter
...
(3C460), rev 1.00/2.05
2000-02-29 19:08:09 +00:00
b95fbdaeb7
Regen
2000-02-29 19:07:33 +00:00
eff003f7ce
add product ID for 3COM 3COM HomeConnect Ethernet USB Adapter (3C460),
...
rev 1.00/2.05
2000-02-29 19:06:40 +00:00
8cde772948
Oops.. Need to note the parity status when we unconfigure.
...
Noted by Aaron J. Grier. (Thanks!)
2000-02-29 16:54:29 +00:00
c09a9a072f
Oops, pasto.
2000-02-29 11:14:46 +00:00
d788e0dbad
Make sure to initialize xs->req_sense_length (to 0). This appears to be
...
a historical leftover, and very few drivers actually look at it. But the
PCI `ncr' driver does, and if this field is not initialized to its default
value, that driver will fall over flat on its face when it attempts to get
sense data from a target.
2000-02-28 17:44:20 +00:00
32817a3257
WSMOUSE_SCALIBCOORDS had not worked because ioctrl code was wrong.
2000-02-28 12:34:31 +00:00
c627d45cc3
(fxp_init): don't clear the FXPF_MII flag as this results in a panic
...
when detaching
2000-02-28 10:16:17 +00:00
86ae2ab1fc
Add ADEV_NOSENSE quirk for HITACHI CDR-7730.
...
Patch sent by Hume Smith in kern/9489.
2000-02-28 09:46:25 +00:00
a87f80ad5f
Give the VPP bits better names.
2000-02-28 07:33:08 +00:00
17f933f6ce
Add missing break that hosed multicast.
2000-02-28 06:44:52 +00:00
d2b929f576
Fix naming think-o.
2000-02-28 05:30:19 +00:00
8841a11f4d
- Disestablish an interrupt if failed to enable the card.
...
- If card isn't enabled, just set given information into softc. Addresses
PR#9457.
- Some cleanups and cosmetic changes.
2000-02-27 23:10:51 +00:00
71df610aeb
Remove no longer necessary workaround for hpcmips.
2000-02-27 22:57:20 +00:00
10d9610df8
Make this driver actually work in NetBSD. From Castor Fu <castor@geocast.com>
2000-02-27 22:15:24 +00:00
7b4eccb432
Use DPRINTF for debug messages.
2000-02-27 21:06:55 +00:00
739151c214
Regen.
2000-02-27 20:44:22 +00:00
741c59a303
Add the QuickShot Strikepad game-pad.
2000-02-27 20:43:53 +00:00
45b36632c0
Add code (off by default) to keep track of the signal strength of the last
...
few packets received from different MAC addresses.
2000-02-27 20:40:42 +00:00
61cc77895b
Some minor cleanup to the probe code.
2000-02-27 20:01:05 +00:00
20e5cfa32f
Billionton Systems Inc. LNT-10TN card.
2000-02-27 11:15:47 +00:00
d386caeaec
regen.
2000-02-27 11:14:43 +00:00
663c327808
Add Billionton Systems Inc. LNT-10TN NE2000 Compatible card.
2000-02-27 11:14:03 +00:00
9a06ea04a2
Fix the same race condition while initializing the socket.
2000-02-27 03:25:03 +00:00
7794bfe183
Reorder the usage of intr_establish/intr_disestablish with respect to setting
...
the CSC_INTR register, to insure that the IRQ is not left floating and enabled
at any point. Eliminates stray interrupts during the IRQ probe.
2000-02-27 03:08:00 +00:00
8c46e74418
Nuke some debugging output that got left in by mistake.
2000-02-27 02:35:33 +00:00
82419f5ae9
Only mark the components as CLEAN if it's the last thing we're doing.
...
Marking them CLEAN earlier is (currently) asking for trouble.
(XXX This could have been done more elegantly.)
2000-02-27 01:50:22 +00:00
a3ae8af043
Allow a flag to be set to force polling for socket events.
2000-02-27 00:14:27 +00:00
16c31080a5
IT8368E legacy mode requires mode change between I/O access and
...
attribute memory access. XXX
2000-02-26 19:02:22 +00:00
d9c47013b2
Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
...
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.
2000-02-26 17:35:33 +00:00
6f1701b01c
Put a lock on the pcic, to serialize access to the chip during event
...
handling. This is important when multiple cards are present when
the system boots, as we use tsleep now instead of delay in various
places (delay used to provide serialization by virtue of not causing
a context switch).
2000-02-26 17:24:44 +00:00
beecfd4814
cnw is 8bit-only card. map memory region as 8bit only.
...
(there are so many 8bit-only card fixes. don't we have some hint on cis tuple?)
From: feico
2000-02-26 05:34:43 +00:00
52169104c5
Fill in the softc's bus space tag (OOPS!).
2000-02-26 05:11:27 +00:00
78171a3a3e
I told them not to use IST_LEVEL here. Now PCMCIA works on my AS200. *sigh*
2000-02-25 20:48:22 +00:00
49f1a84ad6
Be even more careful about cleaning up the socket at boot time.
...
Also, nuke the windows when the socket is disabled. (They might be deallocated
and reallocated, and would thus cause a conflict.)
2000-02-25 20:45:43 +00:00
caa3932441
Minor cleanups. Remove extra debugging printouts.
2000-02-25 20:11:00 +00:00
21243f6205
- ignore the mod_counter when checking to see if a component fits with the
...
rest of an autoconfig set.
- minor cleanups
2000-02-25 19:56:56 +00:00
503220a18f
- ignore components whose mod_counter values are too low.
...
- noting the mod_counter for autoconfigured sets would be a win too.
2000-02-25 19:56:32 +00:00
7da6407d04
add (minimal, PIO only) support for the popular "Tundra Universe"
...
PCI-VME interface chip and a frontend for the "Bit3 Mod. 2706"
PCI-VME adapter
2000-02-25 18:22:39 +00:00
2fd2b78c1f
Only call the cursor method when the cursor state is actually changing.
...
This avoid corrupting VGA displays in text mode (e.g. the first character
of the prompt when you exit vi).
2000-02-25 17:42:51 +00:00
8d63540a8c
When we close autoconfigured components, we need to note that they
...
are no longer in 'autoconfigured' status.
2000-02-25 17:14:18 +00:00
469464d4c8
add forward declaration of "struct extent", so the extent header doesn't
...
need to be included
2000-02-25 10:33:12 +00:00
7dbe5be481
Disable all windows at boot time, to avoid conflicts when reading the CIS.
...
Also, GC a small bit of code that's inaccesible after the previous change.
2000-02-25 05:26:17 +00:00
ac4c520f05
If we fail to attach the socket driver, clear PCIC_FLAG_SOCKETP so that we
...
don't try to use the socket any further. (This will only happen if the user
explicitly unconfigured some of the sockets.)
2000-02-25 04:24:37 +00:00
1ccb9e8170
when change mbuf type, clear m_pkthdr so that we do not get panic with
...
old data in pointer fields. NOTE: we'll extend m_pkthdr field soon.
Wondering: do mbuf pre-allocation code in elink3.c really buy us much
performance? it comes with code duplicate/synchronization problem with
sys/mbuf.h...
2000-02-25 03:39:13 +00:00
a4f7f062fd
- cleanup raidinit()
...
- cleanup rf_mountroot_hooks()
- various other cleanups.
2000-02-25 02:42:30 +00:00
5716b5d6d1
Be *slightly* more consistent about the use of num and numraid in raidattach().
2000-02-25 02:21:12 +00:00
f5f2ad429c
Initial import of National Semiconductor LM7[89] Hardware Monitor with isa and
...
pnpbios attach.
examples:
lm0 at pnpbios0 index?
lm0 at isa? port 0x290
TODO: spinlocks, i2c interface.
2000-02-25 02:17:43 +00:00
e4e4483cb7
Fix a (slightly) bogus status message.
2000-02-25 02:06:34 +00:00
c86b7572f9
Cosmetic change.
2000-02-25 00:23:57 +00:00
bdd659fc7f
Deal with unconfiguring components in the autoconfigure case.
2000-02-24 23:39:21 +00:00
28fc2b2ee8
Add a DPT ISA HBA frontend, tested lightly with a PM2021A/9X. There are some
...
issues.
2000-02-24 18:49:06 +00:00
50062f0914
- Don't use bitfields.
...
- Cosmetic changes.
- Shut down all HBAs "simultaneously", not individually.
- Don't bother grokking HA_ST_MORE. It causes problems.
- Other bits and pieces.
2000-02-24 18:47:55 +00:00
aea97a5a17
Oops... Missed commmitting this last night. Thanks to Matthias Scheler
...
for letting me know.
(Add the DiskQueueSW pointer)
2000-02-24 17:12:10 +00:00
e644abfe94
Make sure we close auto-configured components appropriately when
...
attempting a rebuild-in-place.
2000-02-24 04:39:41 +00:00
c5961cfba3
Garbage collect some unused stuff. Include rf_kintf.h for a
...
function prototype.
2000-02-24 03:52:15 +00:00
851a2cdcd8
- record the pointer to the DiskQueueSW so we can use that when
...
we hot-add a spare.
- use the above info when adding a spare.
2000-02-24 03:48:41 +00:00
5ed29fa2d6
Delete a superfluous newline in attach message.
2000-02-24 03:42:44 +00:00
9e81bc058e
Now that we have the information available, use the general maxOutstanding
...
value for the RAID set, rather than looking at Queue[0][0] (which may not
exist).
2000-02-24 02:55:05 +00:00
99f070bab8
- mod_counter needs to get incremented more often.
...
- use raid_init_component_labels instead of hand-rolling a component_label.
(missed doing this for the rf_used_spare case when updating component labels).
- fix serial number initialization in raid_init_component_labels
2000-02-24 01:23:05 +00:00
fb13ce76fc
- make sure we note the parity status in the autoconfig case.
...
- also, make sure we grab the serial number from the component labels
when we autoconfig.
2000-02-24 01:22:32 +00:00
df1f794536
Reflect version 1.13 of i82365_isa.c. Untested.
2000-02-23 17:22:11 +00:00
7f8cdf038f
Fix a missing closing parenthesis in an error diagnostic
2000-02-23 08:31:25 +00:00
d94804a788
Pccbb maintains the interrupt handlers for 16-bit PC Cards
...
by itself.
Add some comments.
2000-02-23 07:28:54 +00:00
d91ecfbcfd
Be more aggressive about updating component labels in the event
...
of a real component failure (or a simulated failure):
- add 'numNewFailures' to keep track of the number of disk failures
since mod_counter was last updated for each component label.
- make sure we call rf_update_component_labels() upon any component failure,
real or simulated.
2000-02-23 03:44:02 +00:00
e7f3dc2ec9
blockSize for the component label is already set correctly here.
2000-02-23 02:11:05 +00:00
0c43bf18f0
- cleanup of more component label code
...
- make current default label values available everywhere
- make sure numBlocks and blockSize in component labels get initialized
for all component labels
- check for component size to be smaller than or equal to the partition size
when autoconfiguring
2000-02-23 02:04:21 +00:00
6aaac32240
Do a better job of (re)initializing the component labels after
...
a reconstruct or a copyback.
2000-02-23 02:03:03 +00:00
d84e4ed019
Make a note of autoconfigured components.
2000-02-23 02:01:55 +00:00
e0ab2f3d0f
Correct a comment.
2000-02-23 00:37:11 +00:00
214822e08c
Note the fact that the first arg of raidinit() may be bogus in
...
the autoconfig case (the value of the first arg never gets used, but...).
2000-02-22 23:13:15 +00:00
9651e60835
Fix typos in my last commit that caused the driver to panic.
...
Change some (unrelated) debug messages.
2000-02-22 22:59:49 +00:00
347823e807
Include dev/isa/isavar.h so that this file compiles again.
2000-02-22 22:46:16 +00:00
dcfbcbec76
remove bogus debug (was reading unmapped CCR)
2000-02-22 21:29:36 +00:00
08ef0cfe07
revert previous change
2000-02-22 21:09:50 +00:00
64fa8aa0d6
remove SES driver
2000-02-22 17:43:57 +00:00
e8ff7f6155
Bounds-check the 'last unit' a little more closely.
2000-02-22 16:07:02 +00:00
3f9cf7572c
Don't use void * for chipset tags. Bad hacker, no biscuit.
2000-02-22 16:04:44 +00:00
009856b631
Save and restore a couple ofregisters in the power hook in case BIOS doesn't.
2000-02-22 16:03:42 +00:00
9e16037265
Simplify the attach routine a bit.
2000-02-22 12:24:53 +00:00
b4e291e818
Fix some off-by-one errors; patch from Jonathan O'Brien.
2000-02-22 12:12:21 +00:00
9056664327
Prepare a little for having USB interrupt processing done outside the hard
...
interrupt level (in a thread or a softintr).
No real soft processing done yet.
2000-02-22 11:30:54 +00:00
6cc37002ad
Fix (mostly harmless) typo.
2000-02-22 11:25:06 +00:00
2eda3cf829
Better debug info.
2000-02-22 11:24:22 +00:00
bfaa657135
Fix printf formats on the Alpha.
2000-02-22 08:23:22 +00:00
fb56415023
Add a few comments, and an indicator of whether or not an autoconfig set
...
is 'rootable'.
2000-02-22 03:39:47 +00:00
bd2230fd09
- implement additional component checking before autoconfiguration
...
- make component label setting work again(!!!!)
2000-02-22 03:38:42 +00:00
32f100250f
Cosmetic changes.
2000-02-22 02:38:26 +00:00
b785bb47a0
Establish a powerhook and make sure the card detect interrupt is enabled
...
after resume from suspend, as i82365.c does.
This is a workaround for newer Sony VAIO notebook.
Patch is submitted by Atsushi Onoe (onoe@sm.sony.co.jp ) in PR#9463.
2000-02-22 02:35:26 +00:00
afccbaa6d7
Umm.. let's set 'numraid' to something useful before we try to use it.
2000-02-21 23:33:45 +00:00
8f2d14fbd1
added wmesg argument to pcic_delay debug printout
2000-02-21 20:16:22 +00:00
7f44584598
clen up some error messages
2000-02-21 19:18:53 +00:00
296fbeed2a
Patches from msouth@scruz.net to handle QIC 3220 (HP T20).
2000-02-21 05:11:09 +00:00
158df7b6f1
Don't establish an interrupt if attach is in progress. Anyway, current wdc
...
and its children doesn't require interrupt on attach.
2000-02-21 03:55:22 +00:00
91026fe7f2
Cosmetic changes.
2000-02-21 03:26:41 +00:00
70bbb1b84e
Sync PCMCIA memory mapping with a change from rev 1.47 of i82365.c:
...
always map attr memory 8 bit, since its defined that way. (chopps)
2000-02-21 01:44:36 +00:00
3a76270201
deal with a DELAY vs. delay issue
2000-02-20 22:19:29 +00:00
a3a129e6f5
Oops...I forgot that the GEM-2 chip is so lame that if you don't tell
...
it exactly the right amount of data to transfer for WRITE BUFFER/Global
it will stay stuck in command phase (causing a command phase overrun).
2000-02-20 21:30:44 +00:00
5f0b3b1510
usbd_devinfo_vp(): search the know devs array also if the device
...
doesn't return product description (e.g. Kye's Genius NetScroll
mouse returns vendor, but not product); the strings
returned by device are still preferred to those in the array, though
2000-02-20 14:45:05 +00:00
6b93b03665
regen
2000-02-20 14:39:28 +00:00
e710e0dfa1
Add Kye's Genius NetScroll mouse
...
XXX Should the name be just "NetScroll mouse" ? Kye seems to be manufacturer
XXX for the mouse licenced from Genius.
2000-02-20 14:37:48 +00:00
1c4521f1da
add ses.h to list of includes
2000-02-20 07:39:41 +00:00
c5f8d33f85
minor spelling change
2000-02-20 07:38:48 +00:00
6779fc2bb2
Fix thinko in previous commit.
2000-02-20 03:48:40 +00:00
ac75116d32
Try other config entry on i/o space alloc failure.
2000-02-20 03:18:15 +00:00
6f13498242
correct oops on last checkin
2000-02-19 15:13:07 +00:00
a9697ee5f2
Handle > 12 byte CDBs.
2000-02-19 01:55:42 +00:00
717d5b1cc3
Support for > 12 byte commands for parallel SCSI.
2000-02-19 01:54:42 +00:00
d88aecac57
Remove residual and now broken !ISP_NO_FASTPOST_SCSI code (which was
...
turning back on fast posting!). Redo fabric (re)login loop- don't try
and log out ports that haven't been logged in. Do correct target id
shuffling so we just always find the target ID we want. Add in support
for > 12 byte commands for parallel SCSI. Handle some Dual Bus reset
stuff. Finally fix ABORT COMMAND to use the right 16 bit order of the
handle to abort.
2000-02-19 01:53:56 +00:00
ff86abe827
Cleanup some printaouts.
2000-02-19 01:51:43 +00:00
b6dd4ddacf
Add in ISP_SWIZZLE_CONTINUATION macro.
2000-02-19 01:51:21 +00:00
8c2e6c73e3
Handle dual bus cases for immediate notify and enable lun commands.
2000-02-19 01:50:57 +00:00
98f7f7b5a0
Fix ITDEBUG macro
2000-02-19 01:50:25 +00:00
77dec43b22
Clarify cd_resid tag.
2000-02-19 01:50:03 +00:00
8405ee3752
Add in some mbox return codes that define when we've used up target
...
ids for doing fabric login. Define the 'Get All Next' SNS response
structure.
2000-02-19 01:49:47 +00:00
d282f771e7
Remove redundant CIS definitions.
2000-02-18 18:55:31 +00:00
3e02ded337
Improvement on SFB enabled copycol(); still yet under development,
...
it miserably fails on corner cases.
2000-02-18 06:51:51 +00:00
132107ce3b
Add a whole slew of registers found in the PCnet-PCI family.
2000-02-17 20:18:29 +00:00
elric