5f088e0243
wdcstart(): Re-add support of shared xfer queue across multiple channels
...
(was lost between 1.44 and 1.45).
1998-11-29 17:34:49 +00:00
96da1decd9
Fix media probe on non-MII chips.
1998-11-29 01:40:46 +00:00
18e7f69220
Update for new pcmciabus attribute.
1998-11-27 21:59:18 +00:00
9726cfd1fb
Make the copyright header conform to the NetBSD template.
1998-11-25 22:17:06 +00:00
1f676cda09
Implement the AT_READREG flag. This is needed for the CHECK POWER MODE
...
ATA command (among others).
1998-11-23 23:02:11 +00:00
f0559087e0
Changes to deal with mac serial ports having clock sources on DCD or CTS.
...
- When doing a first open, don't enable receive & status interupts before
the MD layer has had a chance to set things up.
- Enable logic to only enable DCD/CTS interupts if we are looking for/
expecting interupts on those pins. Disable otherwise.
- in zs_param, only pass up the state of ZSRR0_DCD if we have enabled
interupts on that pin.
Henry Hotz (<hotz@jpl.nasa.gov>) and Greg walsh <gwalsh@artec.com> have
tried these changes to get certain printers from hanging at boot. They
work in a 1.3.2 kernel for Greg.
1998-11-23 22:10:09 +00:00
3e38051bc5
in wdc_softc: access the per-channel data via a pointer array instead of
...
an array of fixed-sized channel_softc elements. This way IDE controllers
which more than 1 channel (pciide) can extend the channel data easily
for private needs.
To avoid the double dereference at runtime, change the argument of
wdcstart() to the channel data pointer instead of the array index.
1998-11-21 15:41:41 +00:00
ba30effcf8
Changes to support a HIPPI Framing Protocol device, which allows raw
...
HIPPI packets to be written without having to go through the network
stack.
1998-11-20 04:12:57 +00:00
4ba3417429
Implement reference counting for ATA adapters.
1998-11-20 01:22:37 +00:00
396aa17f77
Sigh, my bad. Check for chp->wdc being NULL before trying to deference it.
...
(I didn't realize the ISA wdc front-end doesn't fill in chp->wdc).
1998-11-19 22:50:21 +00:00
5f0577babc
Adapt to the new scsipi_adapter interface.
1998-11-19 21:43:00 +00:00
afc84158d1
Back out revision 1.40. That change couldn't have POSSIBLY worked, since
...
when wdcprobe() is called, the wdc_softc pointer in the channel_softc
hasn't even been intialized!
1998-11-19 19:52:42 +00:00
1461c4fb20
__wdccommand_done() needs to call wdcstart(), otherwise you can run
...
into deadlocks when using wdc_exec_command().
1998-11-19 04:07:54 +00:00
3e086bd63d
Add support for detaching "com" instances.
1998-11-18 23:58:52 +00:00
58932a8415
Quirk out the first test in the beginning of wdcprobe(); the Vaio
...
CD-ROM drive doesn't like it for some reason.
1998-11-18 19:12:08 +00:00
1d0f24882d
Now that the *_activate() functions don't do things which are attachment
...
specific, move them into the chipset drivers.
1998-11-18 18:34:52 +00:00
dd6750820c
Expose the "enable" and "disable" functions so that the front-ends can
...
access them.
1998-11-17 20:25:00 +00:00
b64b7c2964
New IDE xfer flag: C_SENSE, set by the ATAPI back-end sense info needs to
...
be retrieved.
1998-11-17 14:14:52 +00:00
0c3ca7b31e
Finish implementing interrupt-driven card insertion and removal support.
...
- Deactivate the card on removal and queue a REMOVAL event for the socket's
event thread to finish the detach.
- Queue an INSERTION event for the socket's event thread on insertion.
Implement a few missing infrastructure pieces to support this.
Hot swapping of PCMCIA cards now "works". (Not quite; things like network
devices need changes for their respestive subsystems. These changes are
coming soon...)
1998-11-17 08:49:11 +00:00
fc44652721
Implement a kernel thread per PCMCIA socket to handle card insertion and
...
removal events.
1998-11-16 22:41:01 +00:00
d2afdb5b59
Fix some whitespace lossage, canonicalize some media names.
1998-11-16 19:13:31 +00:00
8146c925da
If we get a TX interrupt with no packets buffered, ignore it. This can occur
...
if the chip is reset while transmitting.
XXX
This occurs at boot time because the SIOCADDMULTI always resets the interface
when adding the `all hosts groups' -- usually while the ARP packet is being
transmitted. All drivers should be fixed to not reset the interface when
changing the multicast filter, if possible.
1998-11-12 13:18:26 +00:00
1e71e76d6c
- clearify the boot messages (features supported vs features used). Thanks to
...
Havard Eidnes for his complains about this :)
- fix some typo in comments
- hoppefully better detection of drives reporting bogus PIO modes.
1998-11-11 19:38:27 +00:00
21e1b057bc
Sorry, I forgot to revert "#if 0".
1998-11-09 07:01:47 +00:00
2749e8b74a
We don't need the pci headers here.
1998-11-08 22:02:25 +00:00
e58cf6b359
Add definitions for the ATA power management commands
1998-11-05 22:49:09 +00:00
37bbf03777
fix pcic_chip_socket_enable() to works on more machines.
1998-11-05 07:55:48 +00:00
7b10c3e7e4
Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename
...
constants from EP_ to ELINK_ since they're now used in the ex driver as well.
1998-11-04 00:29:28 +00:00
cd7f7eff85
Code common to RealTek 8019 and 8029 NE2000-compatible Ethernet chips.
...
Includes media selection support and support for Full-duplex.
1998-10-31 00:44:33 +00:00
fa97a53c11
Multiple inclusion protection.
1998-10-31 00:31:43 +00:00
992f2906ba
Move the RTL8029 register definitions to <dev/ic/rtl80x9reg.h>, and add
...
the registers/bits present in the RTL8019 (ISA version).
1998-10-31 00:27:41 +00:00
074bc27605
- Add filenames for VDAC/cursor sprite hardware descriptions; bt431reg.h,
...
bt459reg.h, bt463reg.h and ims332.h as pointed by Klaus Klein.
1998-10-30 00:18:16 +00:00
2cb48d6c4e
Add support for macppc.
...
Very special thanks to Itsumi Tsutsui for his invaluable collaboration.
1998-10-28 20:39:45 +00:00
026fcd0ce2
RCS Id police, canonicalize multiple-inclusion protection symbol names.
1998-10-28 16:26:01 +00:00
675a2afc89
- Brooktree Bt459 135 MHz Monolithic CMOS 256x64 Color Palette RAMDAC.
...
- Brooktree Bt431 Monolithic CMOS 64x64 Pixel Cursor Generator.
- Inmos IMS G332 Color Video Controller.
1998-10-28 04:10:36 +00:00
56066ad5fb
Add media list, media list count, and default media arguments to
...
ne2000_attach().
1998-10-28 00:13:47 +00:00
3a9e6f3a29
Define a "page 3", used on some chips which emulate a dp8390, but also
...
provide extensions.
1998-10-27 23:34:17 +00:00
3a7a7177cc
Update for changes to NCR5380_READ() and NCR5380_WRITE().
1998-10-26 04:44:04 +00:00
8ed7c47c7a
In order for the SCI_CLR_INTR() and SCI_BUSY() macros to work, we
...
must actually use the softc pointer provided. Adjust NCR5380_READ()
and NCR5380_WRITE() appropriately.
1998-10-26 04:42:47 +00:00
d4e6677111
Replace architecture-dependent tag/handle field names with
...
architecture-independent versions.
1998-10-25 23:48:29 +00:00
fab7faf6a4
Fix typo
1998-10-25 18:49:18 +00:00
906db1e920
PR/6274: John Ruschmeyer: Add support for the ncr53c80 driver on the i386.
1998-10-25 17:26:41 +00:00
88d1b8138c
If WDC_DIAGNOSTIC is defined, check in wdcstart() that we are called at
...
splbio.
1998-10-21 09:12:46 +00:00
a2386d4325
fully implement soft callback usage
1998-10-20 22:18:13 +00:00
ce89209d42
when transmitting we cannot totally fill the circular buffer (i.e.
...
we can't use up all of the remaining sc->txslot[chan].bfree free
bytes) because that would cause the circular buffer read pointer
to become equal to the write pointer, thus signaling 'empty buffer'
to the hardware and stopping the transmitter. spotted and fixed
by Kenjiro Cho <kjc@csl.sony.co.jp>
1998-10-20 17:53:54 +00:00
794fadcf0a
Donc reset the disk state to 0 in wd.c, set a flag which will cause it
...
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt().
1998-10-20 17:00:26 +00:00
3ebe847640
Stopgap fix for stupid pasto. Fix for the BAHSOFTCOPY case will be provided
...
after more sleep.
1998-10-19 22:00:14 +00:00
96a0812fd8
Kill an extra printf("\n").
1998-10-15 11:38:04 +00:00
d2d873481a
pcic_wait_ready(): If we didn't get READY, print out the current status.
1998-10-15 04:04:43 +00:00
6413810bf3
Stop spurious lpt messages from being printed -- approved by fvdl.
1998-10-14 20:09:06 +00:00
773dc968ad
Remove some debugging printf
1998-10-14 13:28:47 +00:00
de1d4ba9b0
Change the way uCode is loaded into board LRAM, to let it work on macppc.
1998-10-13 22:57:26 +00:00
e8322de657
Add a new drive flag, DRIVE_MODE, set when the drive properly reported its
...
PIO/DMA modes. Don't try a SET_FEATURE if it didn't report its mode.
1998-10-13 15:18:46 +00:00
7545a59b8c
In debug message, always print controller:channel:drive
1998-10-13 15:02:41 +00:00
ff0134b99f
Properly separate DEBUF_XFERS and DEBUG_FUNCS: DEBUF_XFERS is for data
...
transfers (may be called often), where DEBUG_FUNCS is for setup functions
(not used for normal contitions).
1998-10-13 09:33:59 +00:00
da5d0a6f17
pciide.c: don't define WDCDEBUG, so it compiles on alpha. Correct a bogon
...
in the printing of DMA mode (piix3/4 only)
others: set the debug_mask to 0, so that debug messages are turned off by
default but can be easily turned on.
Reset drive_flags to 0 for unconfigured devices, so that they are ignored
later. For configured devices, reset state to 0 after probe/attach.
1998-10-13 08:59:45 +00:00
39c8c94fa5
make it compile with GWETHER again.
1998-10-13 08:33:05 +00:00
19fddaeeb5
Merge bouyer-ide
1998-10-12 16:09:10 +00:00
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
423c1d8dd3
Make AdvanSys narrow driver compile on BIG_ENDIAN machines.
...
Thanks to Izumi Tsutsui
1998-10-06 14:44:21 +00:00
11bc54234b
In epic_init(), attempt to start output on the interface once the interface
...
is initialized.
1998-10-05 19:10:22 +00:00
d9cb3415b1
Fix typo (pointed by Matthias Drochner).
1998-10-02 20:00:28 +00:00
1693b8b4a6
minor changes to console handling in zstty_attach():
...
-wait 20ms between printf() and reconfiguring the hardware
-set cn_tab->cn_dev here because this is the place where the real minor
number is known
1998-10-01 18:52:42 +00:00
bf8783afa4
Fix the receive length so it includes the extra bytes in the fddi_header.
1998-09-28 20:37:12 +00:00
43b462df88
Insert the FDDI control bytes in pdq_ifstart before we load the dmamap
...
and dmasync the data. Fix pdq_os_receive_pdu to use PDQ_OS_HDR_OFFSET
instead of PDQ_RX_FC_OFFSET.
1998-09-28 18:01:43 +00:00
a1528c368d
Fix transmit handling (this also should speed up transmits
...
slightly).
1998-09-28 17:13:54 +00:00
b2a68e14db
Change sources to be KNF
1998-09-26 19:53:34 +00:00
da0a3e615e
Add support for AdvanSys Ultra Wide boards ABP-9xxUW
1998-09-26 16:09:32 +00:00
c6ccd1d83f
Remove Wide boards references
...
Adjust copyright
At this time this driver support the following AdvanSys boards:
- ABP-9xx
- ABP-9xxU
- ABP-9xxUA
1998-09-26 16:02:56 +00:00
7d6c07a559
Use the data32iot and data32ioh members of the wdc_attachment_data
...
structure for 32 bit transfers.
Test for 32 bit capability on data transfers currently restricted to 16 bit
only.
1998-09-22 00:27:51 +00:00
962edcdc03
Add data32iot and data32ioh members to the wdc_attachment_data structure.
...
This bus space tag and handle is used for 32 bit data transfers i.e.
when WDC_CAPABILITY_DATA32 is enabled as the 32 bit data register may
not be part of the standard drive registers.
1998-09-22 00:21:16 +00:00
0b10e1ddab
Parallel port support routines.
1998-09-21 21:26:51 +00:00
ad921921e4
Add softserial to the alpha port. This significantly improved PPP
...
throughput on com ports.
1998-09-21 00:33:16 +00:00
08e1d890a4
Changes so that BPF readers will get the data in fddi packet aligned along
...
normal boundaries. This makes tcpdump much happier.
1998-09-20 02:36:08 +00:00
935fbed4fe
Make sure data in FDDI packets are aligned nicely (for alpha, etc.)
1998-09-19 21:21:25 +00:00
1dac5b5291
Several changes, including some stub fibre target mode stuff. Establish
...
a slightly different fibre startup (print ALPA now too). Change
the way that return values from dma setup is done. Make debug messages
out of some queue overflow situations. Turn PORT LOGGED OUT into
Selection Timeout equivlaent. On isp_restart actions don't blow off
the commands with HBA_BOTCH (XS_DRIVER_STUFFUP) - set them with HBA_BUSRESET
(which is defined as XS_DRIVER_STUFFUP until someone decides whether
the suggested change to the midlayer NetBSD is worthy of inclusion).
1998-09-17 23:05:46 +00:00
a0a31568e8
cleanup header to be just NetBSD, roll rev, change QDEPTH to QAVAIL macro
1998-09-17 22:52:54 +00:00
0e0010df41
cleanup header to be just NetBSD
1998-09-17 22:52:14 +00:00
cb787c768d
add some target mode definitions
1998-09-17 22:51:54 +00:00
24717f3c3a
cleanup header to be just NetBSD
1998-09-17 22:50:53 +00:00
95807e512a
Garbage collect unused 3rd parameter to comprobe1().
1998-09-16 21:30:58 +00:00
7aa4d4483e
Revert the last change: returning COMPLETE is clearly the wrong thing to do
...
if we weren't polling to begin with.
1998-09-16 05:36:35 +00:00
0af57c2461
Correct a serious problem that affects at least front ends that can only
...
use PIO (or equivalent) code to do asynchronous transfers: In
ncr5380_scsi_cmd(), test to see if the request has been completed after
the call to ncr5380_sched(), and return COMPLETE if so. This avoids
going into an infinite loop in scsipi_execute_xs() while waiting for an
interrupt to trigger completion of the transfer... which, of course,
never happens, since it's already done.
1998-09-14 05:56:14 +00:00
32f42fe1e9
Make sure all voices are deallocated on close.
1998-09-13 04:41:34 +00:00
ea4898c76c
Add arc as a target platform.
1998-09-11 19:39:28 +00:00
9539399333
Add support for passing device quirks from the attachment routine,
...
and add support for a NO_EXTRA_RESETS quirk (required by the TEAC
IDE Card/II, which the Vaio uses).
1998-09-10 19:24:45 +00:00
4a1ccd2fe7
turn into a debug message an ABOUT F/W failure. Add ISPCTL_UPDATE_PARAMS isp_control case
1998-09-10 17:10:27 +00:00
9ce5ae6b97
Protect Debugger() call a'la uha driver. PR #6070 , Gary D. Duzan.
1998-09-09 05:28:58 +00:00
d1fba4e7e5
Don't use M_WAITOK to allocate the ring buffer; we could be in interrupt
...
context. Reported by Lennart Augustsson.
1998-09-09 05:17:53 +00:00
a79310ba38
Major reworking of initialization code, addition of NVRAM reading, usage
...
of device speed updating, etc... A lot of FC and other case statement
handling. Whew. Too much to really detail here.
1998-09-08 07:28:50 +00:00
6e2341ae63
Roll major revision. Change some definitions around. Add more current device
...
state stuff. Make DPARM flags full 16 bits (no shifting needed) and add
the 2 new ones for the 7.55 f/w.
1998-09-08 07:27:04 +00:00
542648bf0e
Move all ASYNC definitions here (after all, they're mailbox registers).
...
Clarify FC initialization control block. Add macros for setting WWN
into same. Add a wad more definitions in this area.
1998-09-08 07:24:23 +00:00
170521610e
Add more ASYNC event codes here. Add NVRAM definitions.
1998-09-08 07:22:06 +00:00
c0eabb441f
add case for going from probetime to runtime speeds
1998-09-08 07:19:58 +00:00
9752520872
roll revision, change default tagging to simple tags
1998-09-08 07:18:56 +00:00
b871ab5f2c
Use the new "%b" format for the various control register bits.
1998-09-06 21:39:33 +00:00
344ed1eaef
Assign copyright to TNF.
1998-09-05 14:20:01 +00:00
ba8c6b9828
arm32 now supports soft serial interrupts.
1998-09-05 04:25:35 +00:00
a3ee69c87a
Split SMC chipset ARCnet driver into
...
- machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h,
using bus_space methods
- ZBUS frontend in arch/amiga/dev/if_bah_zbus.c
- added IPL_SOFTNET to arch/amiga/include/intr.h, for this
Implementing the ISA bus frontend is left as an exercise to the reader.
1998-09-02 22:32:06 +00:00
380e88d4f0
Adjust some comments.
1998-09-01 22:56:00 +00:00
6693724a83
Changed inaccurate comment on the sc_freq member of the driver's softc
...
structure. The frequency is represented in MHz rather than Hz. [PR/6805]
1998-09-01 22:22:03 +00:00
fec2fa9e43
Typo in device Id mask.
1998-09-01 21:04:43 +00:00
d58173741d
kill the last remnants of __BROKEN_INDIRECT_CONFIG. (only the pica port
...
used it, and it's non-working and apparently slated for replacement.)
1998-08-31 22:28:04 +00:00
860867bfec
macro argument protection.
1998-08-31 11:13:10 +00:00
73b946e04e
LSI64854 DMA engine driver.
...
Currently used by Lance Ethernet and NCR SCSI front-ends on sparc/sparc64.
1998-08-29 21:42:03 +00:00
17759893b0
Add rcs id
1998-08-29 13:44:49 +00:00
370a38c007
Add braces to make egcs happy.
1998-08-28 20:03:10 +00:00
f3bfb08d45
When determining the default media on the Vortex/Boomerang, don't pick
...
the full-duplex variant. XXX We should check the EEPROM for "default to
full-duplex".
1998-08-28 18:16:02 +00:00
b1447741da
Nuke Dprintf; fix formats.
1998-08-28 08:59:14 +00:00
dd0709d28d
Add selected `%b' bits.
1998-08-27 20:05:11 +00:00
142bff0170
Add missing entries and make it slightly more verbose.
1998-08-27 19:53:02 +00:00
b3279eb3dc
Move a few prototypes.
...
Whitespace cleanup.
1998-08-27 18:45:12 +00:00
fc397afa14
debug level 0
1998-08-26 15:06:37 +00:00
d9e417cde9
Add AdvanSys 930U and 940U SCSI controllers
1998-08-26 14:13:58 +00:00
6633896a67
Do some renaming of registers and make sure we get sound in both
...
channels on OPL3.
1998-08-26 13:08:10 +00:00
bb3c56652c
Make the OPL driver turn on the sound on sound cards that require it.
...
That makes it much more likely that we get any sound. DUH!
1998-08-26 12:10:22 +00:00
bc21c243cd
For non-MII Vortex/Boomerang, set full-duplex in the MAC CONTROL register
...
in epsetmedia() if full-duplex is selected (new feature on these cards!)
On MII Boomerangs, set the full-duplex bit in MAC CONTROL in the statchg
callback from the MII layer. Should fix full-duplex on these cards.
1998-08-26 01:32:41 +00:00
19b759c2e4
Define the full-duplex bit in the W3 MAC CONTROL register.
1998-08-26 01:29:03 +00:00
d4ec33b5f0
The new MI part of the AD1848 driver.
1998-08-25 22:36:40 +00:00
54bf4389f9
egcs brace warning
1998-08-24 02:34:44 +00:00
f2ff59edc5
Change debug output.
1998-08-22 22:54:11 +00:00
177621555f
remove sparc hack: there's a bus.h now.
1998-08-20 11:42:55 +00:00
1f007a13cc
Cast bus_size_t to u_long in printf() args.
1998-08-20 11:42:13 +00:00
b43fc64da6
Registers for the Brooktree Bt463 RAMDAC.
1998-08-18 07:43:09 +00:00
6bfd748b46
First-crack at RoadRunner (3c574-TX 10/100Mbps PCMCIA). Doens't yet use
...
any of the RoadRunner speed hacks.
1998-08-17 23:20:39 +00:00
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
a1ac68819f
Assign my copyrights to TNF.
1998-08-17 00:26:32 +00:00
2a5371253c
splnet() is not appropriate for everyone. Raise and lower SPL via
...
macros defined in pdqvar.h
1998-08-16 03:44:42 +00:00
cbcc3cfa46
Oops, back out something that I didn't intend to commit.
1998-08-16 01:16:57 +00:00
d07b3639a4
Assign my copyrights to TNF.
1998-08-15 17:47:15 +00:00
c2f2b0d431
RoadRunner has a bit in Reset Options that must be set to enable the MII.
...
Define that bit.
1998-08-15 16:50:07 +00:00
a0aca43d11
Reset Options is in Window 3; correct a comment.
1998-08-15 16:47:30 +00:00
479d8b25bf
The 3c515 (Corkscrew) and 3c574 (RoadRunner) have their Window 1 registers
...
offset! Define an inline function to compute the Window 1 register offset
and use it.
1998-08-15 16:20:51 +00:00
31a3d86b80
Define the Corkscrew chipset - used by the 3c515 ISA 10/100mbps cards.
1998-08-15 16:15:40 +00:00
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00
7d0d0346fa
Define the RoadRunner FIFO count registers.
1998-08-15 08:28:22 +00:00
ccf620bfab
Define the 3Com "RoadRunner" chipset; like the Boomerang, but for PCMCIA.
...
No DMA is wired up, it has a shared memory interface, and a FIFO buffer
which can be used to speed up PIO transfers. (The latter two are
PCMCIA-specific speed hacks to deal hide the performance lossage from
using a PCMCIA->PCI bridge internally.)
1998-08-15 07:28:04 +00:00
cc8a78e783
Assign my copyrights to TNF.
1998-08-15 04:42:42 +00:00
b2827b9d36
Assign copyright to TNF.
1998-08-15 04:16:55 +00:00
6d3d8a1350
Make copyright notices with my name consistent.
1998-08-15 03:02:31 +00:00
cea8e0a23f
explicitely select the master before trying to access its registers
1998-08-14 20:39:04 +00:00
a2dd74ed79
Merge paddr_t changes into the main branch.
1998-08-13 02:10:37 +00:00
b170caf730
Completely rewrite media selection. Add support for the MII/PHY on
...
the 3Com 3c905-TX and 3c905-T4. Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).
Fixes kern/4782 (Chris Demetriou).
1998-08-12 18:51:52 +00:00
53907fe5a1
Support Cabletron Ethernet card, from John Marohn in PR 5762.
1998-08-12 07:19:09 +00:00
7b8168e675
Adapt to new MII code.
1998-08-11 00:12:52 +00:00
b1bb9aa490
Oops. We do still need to set t_dev in the first open part of zsopen,
...
so we get ttyXX vs cuaXX right. Leave the initialization in attach.
1998-08-09 18:36:45 +00:00
26e55969e4
Initialize the struct tty's t_dev field at attach rather than first open.
...
The attach routine calls zsparam if we're setting up the console, and
zsparam needs this field to tell which zstty to set up. Otherwise, we
set up zstty0 even if it's not the console!
1998-08-09 06:17:07 +00:00
e2686d0a1b
Use splnet, not splimp.
1998-08-08 23:51:39 +00:00
06761b1ed4
Merge in a register definition mentioned only in passing in one place in
...
the Zilog docs.
1998-07-31 05:08:38 +00:00
bouyer