undone by rev 1.7:
>redo pmax/include/reg.h
>so that the definitions needed by locore.S are in a separate file,
>pmax/include/regnum.h.
* Add explicit `#include <mips/regnum.h>' where symbolic offsets
into a mips trapframe or struct reg are used..
Add DDB interface to /sys/arch/mips/mips..
Rework heuristic stack traceback to work with DDB.
Add hooks to print exception log from DDB.
Add hooks from pmax console drivers: call Debugger()
after break from serial console, or 'DO' key from LK-xxx.
* cpuregs.h:
rename remaining VMMACH_xxx TLB macros to MIPS_TLB_xxx.
Add compile-time MIPS3-only, compile-time MIPS1-only, and
runtime (both) definitions for number of TLB ASIDs (tlb pids)
and shift count to extract a TLB pid.
* locore.h:
Delete unused vector slot for indexed TLB writes.
mips1 and mips3 TLBs are different enough that we have
to break them out at the caller anyway.
* Add compile-time MIPS3-only andcompile-time MIPS1-only
macros to call locore functions directly by name.
Use the existing method table only if
* mips/mips_machdep.c, mips/trap.c, mips/pmap.c, pmax/machdep.c:
Use MIPS3_ or MIPS1_ specific names for TLB pids in
mips3 and mips1 specific code paths (e.g., creating the kernel stack
for process 0).
Add `options MIPS3' to pmax/conf/GENERIC.
* cpuregs.h:
Delete unused VMMACH_ names (e.g., duplicates of PTE bits in pte.h).
Change remaining VMMACH_xxx names to MIPS1_xxx or MIPS3_xx.
Fold remaining compile-time definitions into a single #ifdef MIPS3.
* Use MIPS1_ names in locore_r2000.S, mips3_ names in locore_r4000.S
* Garbage-collect MachHitFlushDCache()
* psl.h:
use MIPS1_, MIPS3_ symbolic names for Cause register bits.
change _R3K to MIPS1_, _R4K to MIPS3. Conditionalize for mips1 only,
mips3 only, or when both are defined, use runtime CPUISMIPS3 test.
Remove cpu-specific routines from locore.S and add them to locore_r2000.S
and locore_r4000.S. Add entries in locore jump vector table for switch_exit()
and the cpu_switch() context resume.
Add offsets into the jump vector to genassym.cf for use in locore.S.
similar design and code by Jason Thorpe and Jonathan Stone.
NOTE: the kernel-stack-switching code and cacheflush() calls in
locore.S still use #ifdef MIPS3 and need more work.
mips/include/cpu.h:
Add CPUISMIPS3 for run-time tests of what CPU architecture level
we're running on.
mips/include/locore.h:
Add declarations of locore cache-size variables for ref/def toolchain.
mips/include/mips1_pte.h:
mips1 TLB bit definitions.
mips/include/mips3_pte.h:
mips3 TLB bit definitions.
mips/include/pte.h:
define accesor macros for TLB bits (e.g., mips_pg_m_bit(),
that expand to CPU constants if only one CPU arch is configured,
or to inline functions if both MIPS1 and MIPS3 are configured.
mips/mips/locore_r2000.S:
Use MIPS1_PG_xxx constants inside mips1-specific code.
mips/mips/locore_r4000.S:
Use MIPS3_PG_xxx constants inside mips3-specific code.
mips/mips/locore.S:
Use MIPS1_PG_xxx constants inside mips3-specific code.
Use MIPS1_PG_xxx constants inside mips1-specific code.
(Needs more work!)
mips/mips/{pmap.c,vm_machdep.c,trap.c}, pmax/pmax/machdep.c:
Use MIPS3_PG_xxx constants inside mips3-specific functions,
and MIPS1_PG_XXX inside mips1-specific code.
Otherwise, use mips_pg_XXX_bit() macros where they apply,
and use "if (CPUISMIPS3) { ... } else {... }" where they don't.
mips/mips/mips_machdep.c:
Import Michael Hitch's fixes from the pmax locore-init code
into mips_vector_init().
pmax/pmax/machdep.c:
Use generic mips_vector_init() locore vector-init function.
Move mips-specific pmap definitions (PMAP_PREFER for mips3, declaratin
of pmap_bootstrap() for the system-specific machdep.c) from
arch/pmax/include/pmap.h to arch/mips/include/pmap.h.
* Move declaration of locore communcation variables (CPU family,
cache sizes, etc) to mips/include/locore.h. Delete from
pmax/include/cpu.h and older versions from pica/include/cpu.h.
* Move definitions of CLKF_BASEPRI, CLKF_USERMODE to mips/include/cpu.
* Delete duplicate definitions in pica/include/cpu.h, pmax/include/cpu.h.
Change pmax/include/psl.h to just do #include <mips/psl.h>.
pmax/include/psl.h would go away completely if it wasn't stil required
by compat/common/kern_exit_43.c.
Fixes profiling for non-underscore-prepending toolchains
(elf, e.g., shared libs), and breaks a.out/ecoff toolchains.
May break mips kernel profiling too. Needs more thought, since the
original intent of __mcount vs ___mcount on mips date back to pre-1.0 days.
* handle interpreters with nonzero virtual address of entry-point:
subtract p_vaddr from computed entrypoint, as the mips elf exec did.
* Add #ifdef ELF_INTERP_NON_RELOCATABLE/#endif around the code
that tries to choose a `good' address at which to load an interpreter,
if none was set by the emul probe function.
(the address chosen could be improved to avoid fragmenting the
process virtual address space).
* define ELF_INTERP_NON_RELOCATABLE in machine/elf_machdep.h for mips CPUs,
which currently use a GNU-derived ld.so.
ELF_INTERP_NON_RELOCATABLE is not necessary for native NetBSD/alpha ELF
binaries. It may be required for GNU-derived ELF dynamic loaders (Linux/i386?)
mips_r2000_, mips_R2000_ -> mips1_
mips_r4000_, mips_R4000_ -> mips3_
(which are also, for mnemonic reasons, consistent with gcc flag usage,
rather than using mipsI_ and mipsIII_).
* Move mips-I pte (TLBlo) definitions from pmax/include/pte.h
to mips/include/mips1_pte.h
* Move mips-III pte (TLBlo) definitions from pica/include/pte.h
to mips/include/mips3_pte.h
* Add new mips/include/pte.h, which includes exactly one of
mips1_pte.h or mips3_pte.h (which still have namespace collisions),
depending on "options MIPS1" or "options MIPS3". (hack).
Move soft kvtopte(), ptetovk() definitions to mips/include/pte.h
* Add macro PTE_TO_PADDR() to hide the different hardware TLB formats
when mapping from pte to physical address.
* Add macro PTE_READONLY() to hide lack of SW read-only bit in mips-III
tlb. (mips1 pmap uses a sw bit in the PTE, mips3 looks up RO bit in
the kernel pmap.)
* Use macros (not direct TLB frobbing) in mips/trap.c, to make it
mips-1/mips-III indepenndet.
* Change {pmax,pica}/include/pte.h to just do #include <mips/pte.h>.
consistency with the way machdep headers for other things are done.
(the creation of the ecoff_machdep.h files was done on the CVS server, to
keep the RCS logs intact.)
macros to use to remove #ifdefs from the machine ID case check.
Eventually, these headers will contain other information, e.g.
machine-dependent relocation information, etc.
definitions.
* Include <mips/cpuregs.h> in <cpu.h> so kern_clock.c has user/kernel
status bits in scope. Still needs work; r2k/r4k previous-mode bits
are different.
* Include <mips/mips_param.h> in pica/include/param.h, for locore declarations,
and definitions of vm and other constants that should be shared across
NetBSD/mips systems to esnsure user-level binary compatibility.
to the mips tree.
* Add declarations of functions used by vm_machdep.c.
* Add declarations of functions printed by name in stack tracebacks.
* Add declarations of functions used by the model-independnet mips machdep.c
code.
an vector (struct) of function pointers. Add prototype declarations for
each vector entry.
Add declarations for the r2000 (MIPS-I) and r4000 (MIPS-III) locore
versions of the relevant functions.
Replace impliclty-sized types (u_long, u_short) used in
declarations of byteorder functions witho explicitly sized types
(u_int32_t, u_int16_t).
Avoids problems with using ntohl(foo) as (eg) an argument to printf().
Do not define __BDEVSW_DUMP_OLD_TYPE, as it breaks prototyping
of device dump functions, and should be port-dependent in any case.
The pmax 4.4bsd/pmax-derived drivers are being fixed, and the pica port
uses the MI scsi drivers already.
* add "MIPS_3k_" for the MIPS-I r[23]000-specific register definitions.
* add "MIPS_4k_" for the MIPS-II/III r4000-specific register definitions.
* add #defines that provide the old values for locore and user
code, so the existing code continues to compile.
Regression-tested against the old headers by grepping for #define's,
editing out the defined symbols, and preprocessing with both the previous
machConst.h headers and this version.
Some unused symbols (CPU and FPU must-be-zero constants) are no longer defined.
Pica interrupt masks are now constant expressions instead of constant
values.
TODO:
* factor out the common #defines into src/sys/arch/mips.
* Get rid of the Sprite coding-style names (MACH_xxx).
* Separate out the r3k/r4k differences from the Pica/pmax differences.
* Figure out how to have a run-time choice of r3k vs. r4k support,
instead of a compile-time choice.
Update the include-idempotency preprocessor token to match.
References to machAsmDefs in vendor (sprite, 4.4bsd) headers left unchanged,
for historical accuracy.
provide r3k and r4k versions of each, and move to sys/arch/mips/include.
Note in comments where each mips-based port should provide
definitions in its own cpu.h after including this file.
opcodes from the Pica port. Per Fogelstrom claims the latter are all
supposedly MIPS-II (r6000) instructions, rather than MIPS-III (R4000),
but we haven't checked to be sure. Are LL/SC really in MIPS-II?
CVS:: ----------------------------------------------------------------------
versions work correctly; at some point between then and the immediately
preceding revisions, the "stylistic" changes to one (or both) stdarg.h
and varargs.h broke passing doubles to printf().
jonathan