d617788337
Fix typos in prototypes of console-init entrypoints.
1997-05-24 09:15:46 +00:00
b14cdadc36
lint: Create mips/include/conf.h with prototypes for {mem device.
...
Add 'struct proc *p' 4th arg to mmopen(), mmclose().
Delete unused variable.
1997-05-24 08:57:59 +00:00
aab81e72b8
lint: add prototypes for interrupt(), softintr(), pppintr().
1997-05-24 08:49:22 +00:00
8f17cfaec1
Add 'needs-flag' to pmax, 3max dc (DZ-11 clone) front-ends (dc_ds, dc_ioasic
...
respectively), so console setup code can test forconfiguration of the
correct front-end (via NDC_DC and NDC_IOASIC, respectively).
Delete 'needs-flags' from dc.c. GC obsolete uses of NDC, "dc.h".
1997-05-24 08:19:44 +00:00
20e5e29aef
Use a ldscript to work around `features' (not enough section headers)
...
when linking kernels with GNU binutils-2.7 or newer ld.
1997-05-24 05:56:06 +00:00
02b403c0bf
#ifdef notyet out the as-yet-Undefined bold mode, instead of commenting it out.
1997-05-24 05:49:22 +00:00
5cf71bf343
Add declarations and cdevsw/bdevsw entries for cd, ccd, ss, uk, tun.
1997-05-24 05:28:17 +00:00
fc60f1979e
Prevent RAM disk hooks from compiling until sun3 md_root.c can support
...
ram disk images that are read in from the outside.
Sync with some old local changes.
1997-05-24 00:09:49 +00:00
ba1c517a52
GNU ld script for linking mips kernels, contributed by Arne Juul.
1997-05-23 22:21:06 +00:00
8c07b39516
Use genassym.sh to facilitate cross-compiling.
1997-05-22 22:50:38 +00:00
2c7dbe6639
Add <machine/trap.h> so we don't need to define all the trap values in
...
assym.h.
1997-05-22 22:48:47 +00:00
ddf49ca947
Use genassym.sh to facilitate cross-compiling and add -Wmissing-prototypes.
1997-05-22 22:45:37 +00:00
4f74abe8b7
Remove redundant cpu_set_kpc() prototype, found by Paul Goyette.
1997-05-22 18:40:10 +00:00
0db8e55935
DMA state was not getting saved if dmaCurPhase was data-out. If the
...
message-in was a save data pointer, the driver would loop in the
interrupt routine.
1997-05-22 03:26:16 +00:00
d212e8744e
Include "rasterconsole.h" to get definition of NRASTERCONSOLE (rcons flag).
...
Don't try rcons on 3100s with keyboards if rcons isn't configured,
1997-05-21 19:41:08 +00:00
8253e6e107
Comment for susword was from fusword and hadn't been changed.
1997-05-21 03:51:04 +00:00
b088f1b7fd
Change default le entry from "le*" to "le0" so GENERIC kernels
...
configure the pmin/pmax (2100/3100) baseboard ethernet as le0, not le1.
1997-05-20 08:36:42 +00:00
0304ff6aed
Implement code to dynamically size the number of page tables based on available
...
RAM at boot.
Also did some cleanup of unused functions, updated several comments, and
removed unecessary 'XXX's.
1997-05-20 06:01:19 +00:00
a777c246ad
Adjust for previous m68k/pcb.h change
1997-05-20 03:25:07 +00:00
1175a38b7f
Use cpu_splXXX() functions to enforce the required ordering of spl()s.
1997-05-19 23:34:40 +00:00
ba2aa6f75a
Add cpu_spl[012345]() definitions to locore. These clear the given
...
interrupt-enable bit in the status register, and all lower bits.
Can be used for spl{bio,net,tty,clock,statclock} on machines where
devices are wried to mips hard-interrupt levels in ascending bit order
so as to match the BSD spl.9 ordering.
1997-05-19 23:25:09 +00:00
f1b84d21b8
Make the install rule nicer.
1997-05-19 21:49:20 +00:00
c53cd4cf48
Add forgotten CLEANFILES. Pointed out by Bernd Ernesti.
1997-05-19 21:34:58 +00:00
0a995f71a2
Fix typo.
1997-05-19 21:24:10 +00:00
3274c536b3
Yet another try to sanitize the bootblock build. Each major target has now
...
its own subdirectory.
Smaller changes involved:
- installboot installs to /usr/mdec
- installboot.8 installs to /usr/share/man/cat8/amiga/
1997-05-19 21:18:58 +00:00
c05eddf7f5
Fix the 'shifting screens' bug on the Falcon. This solution is not perfect
...
since it gives a bit of flicker while switching frame buffers. From
Thomas Gerner.
1997-05-19 21:07:05 +00:00
ae61406a77
Replace bus_tmp() by mapdev() equivalent.
1997-05-19 19:59:36 +00:00
f88bf0a6e9
Replace bus_tmp() with mapdev() equivalent.
1997-05-19 19:56:26 +00:00
d93126b350
Use common m68k/pcb.h; noted by Erik Bertelsen <erik@sockdev.uni-c.dk>,
...
closes PR 3650.
1997-05-19 17:36:45 +00:00
a0d035c410
Fix some printf format inconsistencies; from SUNAGAWA Keiki
...
<kei_sun@ba2.so-net.or.jp>, fixes PR 3619.
1997-05-19 17:23:09 +00:00
a078a4be55
Fix lossage from the latest vm_pmap changes.
1997-05-19 10:14:47 +00:00
f1b8a3c357
Make sure intrtype[] is set. (Curious where this got lost...)
1997-05-19 01:13:01 +00:00
14078d838d
Remove comment about bus dma tag. I've been convinced otherwise.
1997-05-18 23:14:03 +00:00
350c3993aa
Remove bus_tmp().
1997-05-18 21:26:40 +00:00
c0036ae48d
Remove bus_tmp(); it's just a special case of mapdev().
1997-05-18 21:26:22 +00:00
dc9c65530d
Define a `vme' device on `iommu' and allow `vmes' and `vmel' as sub-busses.
1997-05-18 19:41:02 +00:00
18a4aeea23
A bit of framework for sun4m VME busses.
1997-05-18 19:37:37 +00:00
8e9925b45b
Eliminate vm_pmap.
1997-05-18 17:26:30 +00:00
ad19544997
Remove bogus .PATHs.
1997-05-18 12:14:55 +00:00
5e447974cb
Add a comment about why the bus dma tag is not provided to the child
...
bus attaching to the bridge.
1997-05-18 05:30:34 +00:00
2b8a15aed4
Add a comment about why the bus dma tag is not forwarded from parent
...
to child if an auxillary PCI bus is attached to the bridge. Also,
remove an extra ';'.
1997-05-18 05:29:24 +00:00
ac99526674
Add defines for increasing SPL levels, assuming devices are wired up
...
in to CPU interrupt pins in order of increasing priority.
1997-05-18 03:19:41 +00:00
0914945bfe
Keep a shadow copy of the aux register's contents.
1997-05-17 17:52:50 +00:00
1574dad87a
* Missed that one during last commit.
1997-05-17 14:06:26 +00:00
eed1dad537
* Reorganize pc532/stand similar to the alpha and hp300 ports (by stealing
...
Makefiles and scripts from hp300/alpha).
1997-05-17 13:55:34 +00:00
e2a58b69f7
Add #define __VM_PMAP_HACK as a temporary measure.
1997-05-16 21:35:30 +00:00
f7e146ad7f
Return EIO instead of EFAULT when read/write is too big or small.
1997-05-16 05:47:14 +00:00
70d1c8b8c8
Return EIO instead of EFAULT when read/write is too big or small.
1997-05-16 05:33:48 +00:00
7ae81c002a
Actually use the passed physical address in viking_cache_flush(). Also,
...
use hardcoded cache parameters for now.
1997-05-15 22:53:01 +00:00
72d640a497
Tweak gain curve (from nsayer@kfu.com; PR#2909)
1997-05-15 22:32:56 +00:00
3f1da95bc5
Nuke old `mmu3l' references.
1997-05-15 22:25:45 +00:00
05de3b9034
Multicast definitions, forgotten in previous checkins.
1997-05-15 20:10:23 +00:00
4f48bf2bb1
Change some malloc -> MALLOC and free -> FREE
...
More accuracy in diag/panic messages (part of PR3602; Eric Fair).
1997-05-15 19:19:49 +00:00
9854f9917e
Print some more info on unresolved user traps, mostly for DIAGNOSTIC.
1997-05-15 18:33:47 +00:00
e005d20961
Allow MAXPHYS to be specified as a config file option.
1997-05-15 17:27:15 +00:00
dcf4d707a4
Only compile in rcons tests if rcons pseudo-device was declared
1997-05-15 16:43:36 +00:00
e199d62111
Add hooks for definiing kernel RCSId and copyright symbols,
...
via asm(".section"), for compatibility with Alpha tc and ioasic drivers.
Assumes ELF and binutils-2.8 toolchain.
1997-05-15 08:47:05 +00:00
d3c5a81e19
Don't do rcons-specific things if no rcons pseudo-device was declared. Clean up probe-time printfs.
1997-05-15 07:24:37 +00:00
d592c85696
The pmax interrupt handlers were re-enabling clock interrupts ASAP after
...
hardclock() is called. Now, only do so if clock intrs were enabled beforehand.
1997-05-15 05:03:42 +00:00
13f3645083
Merge in changes from Alpha scc driver with RCS log message:
...
> revision 1.33
> date: 1997/05/15 02:15:55; author: thorpej; state: Exp; lines: +8 -4
> - In sccmatch(), check any user-specified offset, allowing scc unit numbers
> to be nailed down. From Ken Hornstein <kenh@cmf.nrl.navy.mil>, PR #3626 ,
> slightly modified to allow wildcarded offsets.
> - Blow away the cf->cf_unit check in sccmatch(); it's bogus.
Also gc usused references to NSCC and #include "scc.h"
1997-05-15 04:49:32 +00:00
a72c2263f5
Change `needs-count' on scc to `needs-flag': should have been `needs-flag'
...
since rev 1.18 of pmax/tc/scc.c.
1997-05-15 04:42:12 +00:00
2494f148f4
- In sccmatch(), check any user-specified offset, allowing scc unit numbers
...
to be nailed down. From Ken Hornstein <kenh@cmf.nrl.navy.mil>, PR #3626 ,
slightly modified to allow wildcarded offsets.
- Blow away the cf->cf_unit check in sccmatch(); it's bogus.
1997-05-15 02:15:55 +00:00
608a6800e6
Things are stable enough that DDB, PMAP_DEBUG and DIAGNOSTIC aren't needed
...
anymore.
1997-05-15 01:49:27 +00:00
3480029167
Add `offset' locator to ioasic-attached devices, for compatibility with
...
the ioasic_submatch() used in drivers shared by pmax and alpha ports.
1997-05-15 00:43:22 +00:00
cc8306e0d2
Remove a : which is too much. fix pr#3621
1997-05-14 18:12:10 +00:00
a83cf310c1
The Hydra is 20 MHz and the Pegasus is 33 MHz.
1997-05-14 16:45:22 +00:00
5079510304
Make the "hydra" call leds_hydra() from clock_attach().
1997-05-14 16:42:45 +00:00
e6fa5bc33d
Add leds_hydra().
1997-05-14 16:37:01 +00:00
b209530013
Remove call to leds_init (it is already in obio_init).
1997-05-14 16:13:31 +00:00
2dc79e5c4b
Link this program statically.
1997-05-14 07:57:13 +00:00
ebb856e274
Long awaited MI/MD separation completed.
1997-05-14 01:37:23 +00:00
fb2e379487
add pci* at pchb?
1997-05-13 22:48:33 +00:00
548e1683bf
add pcibus attribute to pchb, for Intel dual-bus host/PCI bridge chip
1997-05-13 22:48:02 +00:00
86bf57701c
add support for dual PCI bus Intel host/PCI bridge. Thanks to Chris Demetriou for his assistance in educating me about the vagaries of PCI and its configuration model.
1997-05-13 22:47:30 +00:00
a8af683eb9
Eliminate references to vmspace.vm_pmap
1997-05-13 18:00:49 +00:00
1aa91b893d
Eliminate references to vmspace.vm_pmap
...
(also fix some comments).
1997-05-13 17:17:12 +00:00
d69bf3ded2
Eliminate references to vmspace.vm_pmap
...
(also fix some typos in comments).
1997-05-13 17:16:28 +00:00
1d8ffff9d9
Use GLOBAL(), _C_LABEL(), etc.
1997-05-13 16:31:26 +00:00
fac0bcfedb
Update a recently-added comment re: bytelanes values.
1997-05-13 13:22:56 +00:00
5b80f9077f
Tweak sbc_drq_intr() (interrupt-driven PDMA interrupt handler); it
...
now works properly on at least some disks. Further testing is
necessary.
1997-05-13 06:34:00 +00:00
3b7a1d3ab0
Convert several interrupt handlers to bus space model, removing some
...
XXX's. Also, fix a bug in grfmv_intr_generic() that I found and
confirmed with Allen.
1997-05-12 20:35:50 +00:00
4d989c06dd
Add the following drivers:
...
- frodo at intio
- dnkbd at frodo (commented out until integrated)
- apci at frodo
1997-05-12 08:24:56 +00:00
f8337a2c14
Add apci driver glue.
1997-05-12 08:23:28 +00:00
286b3b171d
Add glue for APCI driver at cdev minor #31 and in console switch.
1997-05-12 08:17:53 +00:00
6cc1022d84
Garbage-collect an unneeded definition.
1997-05-12 08:14:01 +00:00
a492e1df80
Add a kernel driver for the APCI 8250-like UARTs that live in the
...
Frodo ASIC, originally contributed by Mike Smith
<mike@pressed.spam.frisbee.net.au>, but reworked by me to:
- Essentially duplicate the dca driver, modifiying where necessary
to work with the APCI.
- Deal with the different Frodo autoconfiguration model.
- Don't attach a tty to the 0th UART - it's not really useful for much
more than the Domain keyboard.
- Added a routine to check for the existence of a DCA at select code 9.
On most models, the 1'th UART is mapped to select code 9 by the PROM,
and on these models, we do _NOT_ want to attach the device as an APCI.
However, on the 425e, this mapping does not take place, so we attach
as an APCI. The 2'th and 3'th UARTs always get tty instances.
- Add console support which will only be invoked on the 425e (i.e. check
for DCA at 9, and defer console to it if it exists).
1997-05-12 08:12:36 +00:00
a155715d44
Add a driver for the Apollo Utility Chip (a.k.a. "frodo"), contributed
...
by Mike Smith <mike@pressed.spam.frisbee.net.au>, with some changes to
the autoconfiguration model and slight changes to the interrupt glue
by me.
1997-05-12 08:03:48 +00:00
2392fb2a1c
Bump version: Added APCI console support
1997-05-12 07:58:08 +00:00
83c63bd2de
- Always build a romout() stub.
...
- If kbdnmi() returns, stop cold, since it shouldn't.
1997-05-12 07:56:00 +00:00
f39885279b
- Define INTIOBASE here for use by the standalone programs.
...
- Add some extern's for "userom" and romputchar()
1997-05-12 07:54:45 +00:00
61322b7b85
KNF and other cosmetics.
1997-05-12 07:53:58 +00:00
bfc4c6c42d
Whoops; here's the rest of the Deferred Task Manager changes.
1997-05-12 07:53:04 +00:00
4e0ee78444
- Always build the romputchar() glue.
...
- Don't set "userom" in the trap handler (we didn't before, but we've
removed the previous CPP conditional that was used to enable it.)
1997-05-12 07:53:02 +00:00
eac0352a9e
In kbdnmi(), after we have cleared the interrupt condition, reset
...
the machine, rather than simply returning to the assembly NMI handler.
Previously, the assembly handler would simply jump back to begin:, which
would frob the stack, and re-clear the BSS. However, this is not sufficient,
as there may be state in initialized data that must be restored. Thus,
the only reasonable solution is to re-load the boot block.
1997-05-12 07:51:32 +00:00
c25bfe1365
Don't use hardcoded hex for the address of the internal HP-IB interface.
...
Instead, use definitions from <hp300/dev/dioreg.h>
1997-05-12 07:48:23 +00:00
82ae3a106e
Don't use a hard-coded hex address for the 0'th APCI port; use definitions
...
from <hp300/dev/frodoreg.h>
1997-05-12 07:47:03 +00:00
0c5b002449
Add prototypes for standalone APCI driver.
1997-05-12 07:45:41 +00:00
05333d3fa5
- Add glue for standalone APCI console driver.
...
- Make the romputchar() useage conditional only on "userom".
1997-05-12 07:44:53 +00:00
225fbfa100
Build the standalone APCI driver.
1997-05-12 07:43:18 +00:00
bbbc6052c1
Add a standalone APCI driver, adapted from the standalone DCA driver
...
by me. This driver should only be invoked when there are no other
suitable console devices present in the system. This situation currently
exists on the 425e, for which we do not have a frame buffer driver,
and who's PROM does not map the second APCI UART to select code 9,
like is done on the 4{00,25,33}{t,s}.
1997-05-12 07:41:55 +00:00
5842491f1c
Add en implementation of the Deferred Task Manager, contributed by Paul
...
Goyette <paul@pgoyette.bdt.com>.
1997-05-12 07:29:29 +00:00
ee80f1200e
Implement new NuBus slot space mapping/probing code, utilizing bus.h (and
...
our MD bus_space_probe() extension). This has several side effects:
- NuBus drivers must map and unmap slot space, rather than relying
on this happening before they are attached.
- Functions exported to NuBus drivers from nubus.c now need to be
supplied with a bus space tag/handle pair.
- Old bus map/peek functions can be garbage collected, as can pmap
support for the same.
Because of some current limitations of the bus space specification, we
are violating the abstraction in grf_mv (NuBus grf driver). All such
violations are clearly marked /* XXX */, and must be addressed when
the specification is updated.
1997-05-11 19:11:27 +00:00
1c454cc472
Diagnostic LED on 3/80 appears to be active-high, not active-low as previously
...
thought. It remains to be seen if this is true for the 3/470.
1997-05-11 06:16:26 +00:00
3d8d0c485c
Add call to leds_init() after everything has started up ok.
1997-05-11 06:15:09 +00:00
f99df8aa9c
rdsetimage -> mdsetimage in comment (enami tsugutomo, PR 3596)
1997-05-10 11:06:53 +00:00
9e785c6d3f
* Define proc0paddr here and not in locore.s.
1997-05-10 09:29:26 +00:00
e63a553175
Change the interface between high and lowlevel audio drivers again:
...
Set the encoding parameters slightly differently.
Remove the SW encoding/decodinf functions from this interface
and move them to the audio_parameter struct; this is both more efficient
and flexible.
1997-05-09 22:16:27 +00:00
cc4a1553a1
Eliminate bogus redefinitions of standard targets.
1997-05-09 07:50:03 +00:00
6fd182057f
cleanup use of whitespace
1997-05-08 16:39:35 +00:00
5c6f7fca32
* Update asm.h to be more like the other port's asm.h.
...
* Update locore.s to use all the macros defined asm.h
* Update random.s to use the much nicer algorithm from the m68k port.
1997-05-08 13:44:11 +00:00
94e0a9b88d
Update to current configurations.
1997-05-08 04:09:27 +00:00
47aae56862
Sync w/ SPARC port, from Paul Krannenburg <pk@netbsd.org>:
...
Remove esp FLUSH when residual bytes are present in FIFO, the ncr53c9x
driver will flush when necessary. Doing the FLUSH here interferes
with DMA-enabled target selection.
1997-05-08 01:33:49 +00:00
c4a52794f1
Convert to new orthogonal audio encoding scheme and implement
...
some of the new encodings. The change to ioctl AUDIO_GETENC is
NOT backwards compatible.
1997-05-07 18:51:31 +00:00
84bca5d679
Don't use _SUBDIRUSE outside of bsd.subdir.mk.
1997-05-07 17:28:47 +00:00
53fb29bd67
We don't need a special clean: target here.
1997-05-07 17:16:05 +00:00
11fc3c2a7a
In case someone doesn't compile in DEBUG we need to still
...
snag the msgbuf. Also, observe protocols about message buffer
being 'mapped'.
1997-05-07 17:13:32 +00:00
185b24dd5b
Use libinstall::, not install:, to prevent instaling LIB.
1997-05-07 16:20:26 +00:00
5432d44374
Override the proginstall target to do our special hackery. (Yuck.)
1997-05-07 16:15:01 +00:00
29ed66d6d3
Minor change.
1997-05-07 16:13:46 +00:00
f778381424
Clean up weirdness.
1997-05-07 16:13:13 +00:00
6e0450c70f
Use proginstall:: to disable installing PROG.
1997-05-07 15:59:08 +00:00
ba4cf66fbe
Add a missing .PHONY.
1997-05-07 08:26:04 +00:00
fd8daf980e
Add .MAKE to the .OBJDIR hacks, so they work with `make -n'.
1997-05-07 07:15:34 +00:00
6fe4889b92
cleanup use of whitespace
1997-05-07 02:20:26 +00:00
a9016579ab
clean up whitespace use
1997-05-07 02:14:59 +00:00
8744fe853c
clean up use of whitespace
1997-05-07 01:55:23 +00:00
c4eb220ea5
minor whitespaco fixes
1997-05-07 00:32:44 +00:00
7f69a90075
whitespacos i missed
1997-05-07 00:29:18 +00:00
3490941ddb
cleanup unecessary quotage of options
1997-05-07 00:27:33 +00:00
8c57ea0789
clean up use of whitespace
...
remove unnecessary quotes around options
1997-05-07 00:23:43 +00:00
45cc2d6db4
turbosparc: 256 contexts, page tables cannot be cached.
1997-05-06 21:00:54 +00:00
4abf5a1a72
be consistent with use of spaces and tabs.
...
don't need quotes around options with _'s in the name
1997-05-06 00:56:53 +00:00
5352e2713a
be consistent with use of spaces and tabs.
1997-05-06 00:31:49 +00:00
3a12db07c6
Update for USELEDS changes (including: garbage-collect LED frobbing
...
code; it has moved to leds.c)
1997-05-05 21:15:41 +00:00
500498e411
Update for USELEDS changes.
1997-05-05 21:14:04 +00:00
e677b62290
Garbage-collect LED-related stuff.
1997-05-05 21:12:49 +00:00
aec958ddf3
Don't initialize the DMA controller here.
1997-05-05 21:11:59 +00:00
95bae625a2
Update for USELEDS changes.
1997-05-05 21:09:13 +00:00
9c8fdf3dad
Use dio_intr_establish().
1997-05-05 21:08:26 +00:00
9eddfbfca3
Update for USELEDS changes.
1997-05-05 21:07:31 +00:00
ff163c6424
Use dio_intr_establish().
1997-05-05 21:06:41 +00:00
feb623a9ea
- Use dio_intr_establish().
...
- Update for USELEDS changes.
1997-05-05 21:05:32 +00:00
3a85f14da4
Use dio_intr_establish().
1997-05-05 21:04:16 +00:00
73b24faec6
Do a bit of spring cleaning.
1997-05-05 21:02:39 +00:00
82cab4fef4
Prototype dio_intr_establish() and dio_intr_disestablish().
1997-05-05 21:01:33 +00:00
5bada123f8
- Initialize the DMA controller in dioattach().
...
- Implement dio_intr_establish() and dio_intr_disestablish().
1997-05-05 21:00:32 +00:00
0a8e2a9ce8
Use dio_intr_establish().
1997-05-05 20:58:18 +00:00
bd2bc06c75
- Make "USELEDS" a defopt'd option, so we can generate dependencies on
...
it. Conditionally compile leds.c on USELEDS.
- Rearrange mainbus and intio declarations slightly.
- Add declaration for the forthcoming "frodo" driver.
1997-05-05 20:57:29 +00:00
663cee4555
Pull the LED frobbing code out of machdep.c. Since there is more than
...
one LED on an hp300 SPU, rename the file to indicate plurality.
1997-05-05 20:54:34 +00:00
397e92e33c
New-style kgdb_machdep.c, mostly duplicated from the sun3 port, modified
...
slightly by me.
1997-05-05 20:51:05 +00:00
95dd345f81
Garbage-collect old KGDB code that is no longer used.
1997-05-05 20:48:26 +00:00
e3a104cb1f
Oops, I forgot to check this file in after clock changes.
1997-05-04 19:13:33 +00:00
6c717dd82c
Bump version number to celebrate the fact that the bootblocks can be used
...
unmodified across all platforms.
1997-05-04 14:19:22 +00:00
b9e2002bb5
Oops- Really should do local files before common.
1997-05-04 01:53:01 +00:00
f534e05161
Fix tags target.
1997-05-04 01:49:14 +00:00
85207f1f0c
Oops. ep at eisa is still `untested.'
1997-05-03 21:27:24 +00:00
90f17dd8ab
Oops; put the __attribute__ in the right place.
1997-05-03 12:49:05 +00:00
a60739aacf
Make sure struct trapframe is packed tightly.
1997-05-03 10:16:58 +00:00
94313a874b
Oops; reverse sense of previous test.
1997-05-03 08:46:09 +00:00
1dafb51ea6
Eliminate unused variable in '030-only kernels.
1997-05-03 08:41:29 +00:00
fc324bb0b9
Eliminate unused variable when !USELEDS.
1997-05-03 07:09:57 +00:00
5230506ca5
Support for clearing interrupts on a Rasterops Colorboard 364.
...
Thanks go to Michel Chalufour <michelc@tiac.net> for grovelling around for
me.
1997-05-03 02:29:54 +00:00
3f7423a432
Wrap all label references with new macros in m68k/asm.h in preperation
...
for ELF switchover. (eventually)
1997-05-02 23:07:35 +00:00
0a9b7dccc7
BPF and multicast support added, patches provided by Jonathan Stone
...
and Ken Wellsch. Fixes PR#2796.
1997-05-02 17:11:24 +00:00
a05df4e228
* finish off support for the 82077 chip as found on sun4m machines.
...
* add non-dma mode bit to `specify command', so formatting disks starts
working (thanks to Jeremy Cooper for finding out about this).
1997-05-02 13:03:44 +00:00
3e9d89dcd0
Switch to copy of file in /sys/dev/ic.
1997-05-02 08:30:42 +00:00
e5380025ac
Now in dev/ic.
1997-05-02 06:31:16 +00:00
1b2e317732
Thanks to Tobias Beal <tbeal41@maine.maine.edu>, we can clear interrupts
...
on at least one Radius Precisioncolor 8 board.
1997-05-02 00:54:28 +00:00
7a80e420ed
Remove unused part of sun3_kcore_hdr.
1997-05-01 22:48:09 +00:00
aba671db48
Treat drhw 118 and 119 the same for Apple ethernet cards.
1997-05-01 18:17:13 +00:00
766d429d62
Correct a comment long since outdated.
1997-05-01 16:24:26 +00:00
24af362f60
Implement pmap_pa_exists() so that /dev/mem works.
...
This was the reason ps (kvm_getargs) did not work.
1997-05-01 15:00:11 +00:00
b9a0ca59bb
oops...
1997-05-01 14:58:20 +00:00
887d5be03e
Forgot to import this. (Thanks, der Mouse)
1997-05-01 14:57:17 +00:00
4072012b2b
Ep driver on ISA bus is no longer untested. Also optimistically
...
removed the `untested' designation from the EISA-bus version, since
there's no reason at all why it won't work.
1997-05-01 07:11:11 +00:00
989ed431e1
Oops, the numbers for "t" and "s" got swapped around. No functional
...
difference, just correct now.
1997-05-01 05:26:48 +00:00
a64bc3c19c
Clear the interrupts properly on an E-Machines Futura II LX and make a wild
...
guess at clearing them on a Futura II SX/DSP and RasterOps ColorBoard 364.
Thanks to Michel Chalufour <michelc@tiac.net> for loaning me the II LX.
1997-05-01 03:34:07 +00:00
ef185efb22
Add in a couple more board types.
1997-05-01 03:31:07 +00:00
5e11440dae
Fix printf format vs. arg type warnings (in DEBUG sections).
1997-04-30 23:28:03 +00:00
19f1b8dd3f
Remove dependency on if_aereg.h for vendor constants; these are really
...
driver-, not architecture-specific.
1997-04-30 19:47:11 +00:00
b28e1b9459
Fix typo in last change.
1997-04-30 19:32:32 +00:00
4a36cdfd19
Adjust to use16bit -> dcr_reg change in MI driver.
1997-04-30 18:10:37 +00:00
19c4f04eeb
Sync with GENERIC, and nuke procfs and kernfs.
1997-04-30 06:06:02 +00:00
526ef2f618
Change the interface between the high and low level audio drivers
...
so that all audio encoding parameters are set at once. This simplifies
the interface and make error checking easier.
1997-04-29 21:01:33 +00:00
0852aa1f1a
Use the new 8390 driver back end.
1997-04-29 05:17:13 +00:00
63ac9ee6e0
Use the new MI 8390 driver, and garbage collect.
1997-04-29 04:40:22 +00:00
d6611ebcef
* Add fixes for possibly-uninitialized variables from rev 1.11.
...
(The operator-precdence changes in 1.11 were pulled up in rev 1.14).
* If the chip asserts a SCSI-bus error (SII_BER) in sii_intr,
reset the SII_BER bit instead of ignoring it.
XXX SII_BER May need checking and resetting elsewhere.
1997-04-29 01:58:38 +00:00
42f8cf900b
Use unsigned when doing copy/xor check.
1997-04-28 23:43:56 +00:00
cb96a536e4
Add a comment about obio_mapin().
1997-04-28 23:38:47 +00:00
1046c915b6
Drivers that use obio_mapin should enforce OBIO attachment
...
(just to be paranoid).
1997-04-28 23:30:19 +00:00
304d49b554
include <machine/leds.h>
1997-04-28 23:21:01 +00:00
712f2e8d93
Moved leds_* declarations into leds.h
1997-04-28 23:19:39 +00:00
589bdf49d5
si_intr: if our CSR indicates an interrupt, return 1.
1997-04-28 22:10:41 +00:00
445e244536
Do console initialization earlier (see obio_init).
...
Document initialization order dependencies.
1997-04-28 22:08:36 +00:00
2e1c5c36ad
Be quiet in _save_symtab() unless there is a problem.
...
Improve some comments (and sync with sun3x code).
1997-04-28 22:06:20 +00:00
2223431f0a
No longer needs an early init call (just normal autoconfig).
...
Only animate the LEDs when we were idle (like SunOS).
1997-04-28 22:04:29 +00:00
df35245ac0
Fix a bug where OBIO locators were not presented to the children.
...
Rename obio_alloc to obio_mapin; add comments, etc. (like sun3x)
1997-04-28 22:02:43 +00:00
388bf0e0e0
Rename obio_alloc/obio_mapin and check for obio in match functions
...
for attachments that will use obio_mapin.
1997-04-28 21:59:19 +00:00
a5efc65699
Sync. up with the sun3x version.
1997-04-28 21:55:59 +00:00
479d3fa66d
No longer needs an early init call (just normal autoconfig).
1997-04-28 21:51:49 +00:00
3c841dcb79
Export the symbol _Idle for clock.c (and fix some comments).
1997-04-28 21:49:38 +00:00
dcd4fae823
Use AUTOVEC_BASE instead of 0x18.
1997-04-28 21:48:25 +00:00
46cd1d0fec
Add a kernel declarations section.
1997-04-28 21:47:10 +00:00
52e455e8ba
Fix declaration of get_control_byte().
1997-04-28 21:46:31 +00:00
236a126750
Declare peek_long().
1997-04-28 21:45:47 +00:00
a0d8cf3b65
Kill an obsolete comment.
1997-04-28 21:44:53 +00:00
c69d32662f
From Mycroft: Oops; forgot to GC the last mbuf allocated when
...
out of clusters.
1997-04-28 20:31:16 +00:00
df082e3c8d
A handle of 0 means the open failed...
1997-04-28 18:46:15 +00:00
37cb09ba66
DTRT if OF_read() returns 0 when no data is available.
1997-04-28 18:33:57 +00:00
70dcf0b5f6
Undo a hack added in the last overhaul (which caused an extraneous byte
...
to be written to the target). Also, use the sc_min_dma_len field
to determine whether to use PDMA or PIO.
1997-04-28 15:59:20 +00:00
547d95a029
Remove esp FLUSH when residual bytes are present in FIFO, the ncr53c9x
...
driver will flush when necessary. Doing the FLUSH here interferes
with DMA-enabled target selection.
1997-04-27 22:12:40 +00:00
97a6c32e58
Garbage-collect a bunch of _very_ hp300-specific code, most of which
...
doesn't work anyhow (due to current and future fundamental differences
between NetBSD and HP-UX device semantics). This can probably be shared
with other m68k ports now.
1997-04-27 21:38:57 +00:00
ba0a5d5c58
Bump version: Better SPU detection code
1997-04-27 21:18:31 +00:00
8b4cae0516
CPU -> SPU
1997-04-27 21:17:13 +00:00
3cb561ed9f
Don't define our own machineid values - pull in <machine/hp300spu.h>
1997-04-27 21:15:14 +00:00
fbad957c52
Update getmachineid() for new machineid values.
1997-04-27 21:13:55 +00:00
767517edcc
Don't even look for a Domain keyboard if we're not a 400, 425, or 433.
1997-04-27 21:12:43 +00:00
5b511796c1
Uniquely identify 345 vs. 375 vs. 400 and 380 vs. 425. Adapted by me from
...
code provided by Mike Smith. While I'm here, convert this file to use
macros from <machine/asm.h> rather than making assumptions about how
C labels are handled.
1997-04-27 21:10:06 +00:00
cdb54b8d65
Update for new SPU options.
1997-04-27 21:06:29 +00:00
b27a863b02
Generate option headers for SPU type options, so that we may generate
...
dependencies on them.
1997-04-27 21:05:49 +00:00
772891accd
Use information provided by <machine/hp300spu.h> to determine if we
...
might have a physical address cache.
1997-04-27 21:02:34 +00:00
650df29d4d
These files depend on things in <machine/hp300spu.h>
1997-04-27 20:58:55 +00:00
18a931000e
Use <machine/hp300spu.h> to determine if we might have a physical address
...
cache.
1997-04-27 20:54:39 +00:00
544f501d29
Rewrite identifycpu() to be partially table-driven, and to be more
...
sane in general. Since we can uniquely identify each SPU type
(except for 318/319/330, because there _are_ no differences, really),
require that the appropriate SPU option be configured into the kernel.
1997-04-27 20:53:30 +00:00
d62e267a0c
Uniquely identify 345 vs. 375 vs. 400 and 380 vs. 425, useful when
...
looking for hp4xx-only hardware during autoconfiguration. Code
mostly from Mike Smith, with a few changes by me.
1997-04-27 20:50:01 +00:00
9d4c5c9106
- Define new machineid and mmuid constants.
...
- Rearrange slightly.
1997-04-27 20:47:23 +00:00
fc79829eab
#include <machine/hp300spu.h>
1997-04-27 20:43:37 +00:00
80ff0f0f2f
- Move a bunch of hp300 SPU-specific stuff out of cpu.h, and place it
...
in new hp300spu.h file. This includes the code that associates
model number with cpu/mmu/cache combinations.
- Define "mmuid" constants for several models, derived from code
provided by Mike Smith.
1997-04-27 20:37:07 +00:00
f5ccce44c8
srt0.s renamed to srt0.S via repository copy Magick - we want this
...
file to be preprocessed before it is assembled.
1997-04-27 20:29:43 +00:00
d25f63a7bf
What was I thinking?
1997-04-27 19:26:48 +00:00
5c869c4c5b
The delay loop needs 8 cycles, not 3, on the 68030; so use _that_ value
...
for the pre-calibration.
1997-04-27 18:14:34 +00:00
c96effb7f8
don't allow i386_set_ioperm if securelevel > 1, either (and fix a really silly bug)
1997-04-26 21:33:42 +00:00
3d9b09a843
If in highly-secure mode, don't ever allow access to IO ports
1997-04-26 20:30:02 +00:00
26adc250c2
Stop ignoring DCD transitions on ioasic SCC serial lines.
...
From entropy@zippy.bernstein.com>.
1997-04-26 02:26:54 +00:00
45d369d5fb
Ted Lemon's (RR 3540) cross-compilation patch: use ${SIZE} instead of size,
...
Also add "SIZE=? size", so that native kernel compiles work, too.
1997-04-26 02:20:59 +00:00
55a34d0cf4
Add "options MIPS1" and delete commented-out lines inherited from GENERIC.
1997-04-26 01:35:41 +00:00
5d8f130bb6
Be quiet in sunmon_abort().
1997-04-25 22:26:14 +00:00
560544f47c
Add a -I${.CURDIR} to build netbsd.sa with a obj dir
1997-04-25 22:17:33 +00:00
7c2c0c846c
- Provide the reasonable size that can/may be mmap-ed. This might differ
...
from the current frame buffer size.
- The et-driver now allows for a 16Kb io-region (was 8Kb) that can be
mapped. The XFree server uses this.
1997-04-25 19:25:38 +00:00
d5733f126e
Allow formatting of 360Kb floppies.
1997-04-25 19:18:04 +00:00
d1c63a4095
Changes to bounds_check_with_label:
...
- Take care of the case where d_secsize < DEV_BSIZE (From Waldi Ravens)
- Don't check if an unsigned value <= 0. This was the cause of various
panics when savecore(1) was reading at bogus offsets because the crash
dump format was changed. Thanks to Jason for unintently revealing the
bug ;-)
1997-04-25 19:16:30 +00:00
92efd222d0
Hack for now: if fpu is there, report it as an mc68882.
1997-04-25 19:16:10 +00:00
dfc2e0f30d
Add devices: idprom, oclock. Add file leds.c.
1997-04-25 19:12:57 +00:00
1676e3a212
Add idprom, oclock, and rearrange somewhat.
1997-04-25 19:11:48 +00:00
ef06b2e55d
Use info on the actual RAM-segments to check the validity of /dev/mem
...
accesses. Reformat some comments.
1997-04-25 19:07:45 +00:00
cd6ee4737e
Renamed obio_alloc/obio_mapin.
1997-04-25 19:02:46 +00:00
678f326c7f
Make idprom_init() figure out where the IDPROM resides.
...
Add autoconfig glue, which currently just shows the
address where the IDPROM was found.
1997-04-25 19:02:06 +00:00
49f095a342
No longer need eeprom_init().
1997-04-25 18:57:49 +00:00
e2ca51d2a1
Fixed OBIO locators bug, so this can do the normal thing now.
...
Also improved handling of spurious interrupts, and sync up with
the sparc version.
1997-04-25 18:55:05 +00:00
4c64781365
Moved the actual model identification work into identifycpu(),
...
which used to be in _startup.c:_verify_hardware().
Use sunmon_abort() in cpu_reboot() for now...
1997-04-25 18:52:11 +00:00
jonathan