The function weston_log_ctx_compositor_destroy(), which destroys struct
weston_log_context, takes weston_compositor as argument. We may have a
weston_log_context unlinked from a weston_compositor and currently there
is no way to destroy it.
Add function weston_log_ctx_destroy(), what makes the destruction of
weston_log_context independent of weston_compositor.
With this change, one could destroy a weston_compositor and keep the
related weston_log_context (since now weston_log_context can be destroyed
without the need of a weston_compositor). But if weston_compositor gets
destroyed it's also necessary to destroy weston_log_context::global,
as the debug protocol depends on the compositor. So a listener has been
added to the destroy signal of weston_compositor.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Since weston_log_ctx_compositor_create() does not have any relation
with weston_compositor, rename it to weston_log_ctx_create().
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
There's a function named weston_compositor_log_scope_destroy()
but it doesn't take a struct weston_compositor argument.
Rename it to weston_log_scope_destroy(), as the argument is a
struct weston_log_scope.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
There's a function named weston_compositor_add_log_scope()
but it doesn't take a struct weston_compositor argument.
Rename it to weston_log_ctx_add_log_scope(), as
the log_scope is being added to a log_context.
Also, bump libweston_major to 9.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Define the void pointer as pixman_region32_t instead of using it
directly.
Void pointers are used by generic API's so each user can define
a data type as needed. Not doing this is dangerous, since void
pointers implicitly cast from/to any pointer without giving
warnings. So we must define its type instead of using it directly
in a function call.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
When option-parser is confronted with a boolean option, have it write a
bool rather than treating the value as a pointer to an int32.
(lib)weston already heavily uses bool types internally, so this has the
nice side effect of eliminating quite a few local variables which only
existed as integer shadows of internal boolean variables.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Wayland innovated a lot of cool things, but non-binary boolean values is
the great advances of our time.
Make config_parser_get_bool() work on boolean values, and switch all its
users.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Instead of getting previous_damage from the weston_output struct, get it from
the frame_signal data argument. This will make possible to remove
previous_damage from weston_output after we decide what to do with
output->previous_damage usage in DRM backend.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
This is necessary for the test harness to be able to execute the compositor
multiple times in the same process. As we never unload opened modules, the
first compositor iteration will leave them all loaded and following compositor
iterations will then have them already loaded.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This introduces a new convention of checking through the compositor destroy
listener if the plugin is already initialized. If the plugin is already
initialized, then the plugin entry function succeeds as a no-op. This makes it
safe to load the same plugin multiple times in a running compositor.
Currently module loading functions return failure if a plugin is already
loaded, but that will change in the future. Therefore we need this other method
of ensuring we do not double-initialize a plugin which would lead to list
corruptions the very least.
All plugins are converted to use the new helper, except:
- those that do not have a destroy listener already, and
- hmi-controller which does the same open-coded as the common code pattern
did not fit there.
Plugins should always have a compositor destroy listener registered since they
very least allocate a struct to hold their data. Hence omissions are
highlighted in code.
Backends do not need this because weston_compositor_load_backend() already
protects against double-init. GL-renderer does not export a standard module
init function so cannot be initialized the usual way and therefore is not
vulnerable to double-init.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This was forgetting to remove the compositor destroy listener, which would lead
to use-after-free on compositor tear-down especially on cms-colord init failure
paths. Found by inspection.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Increase the buf size such it can accomodate sufficiently large local
buffers. Spotted whilst looking for something else.
../compositor/main.c:157:22: warning: ‘%s’ directive output may be
truncated writing up to 511 bytes into a region of size 128
[-Wformat-truncation=]
157 | snprintf(buf, len, "%s[%s.%03li]", datestr,
| ^~ ~~~~~~~
../compositor/main.c:157:21: note: directive argument in the range
[-9223372036854775, 9223372036854775]
157 | snprintf(buf, len, "%s[%s.%03li]", datestr,
| ^~~~~~~~~~~~~~
../compositor/main.c:157:2: note: ‘snprintf’ output between 7 and 659
bytes into a destination of size 128
157 | snprintf(buf, len, "%s[%s.%03li]", datestr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
158 | timestr, (tv.tv_usec / 1000));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This fixes the situation where the same logger scope is passed multiple
times and the timestamp is being sent before the log mesasge.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This wasn't intentional it just kept the way it was done before.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.com>
All these plugins use symbols that were exported by the weston executable and
are now exported by libexec-weston.so. Linking these to libexec-weston.so fixes
unresolved symbols.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is preparation for disallowing unresolved symbols project-wide.
This is a temporary fix that should be reverted and fixed properly later.
/usr/bin/ld: compositor/fb12c4d@@cms-colord@sha/cms-helper.c.o: in function `weston_cms_set_color_profile':
/home/pq/build/weston-meson/../../git/weston/compositor/cms-helper.c:79: undefined reference to `cmsReadTag'
/usr/bin/ld: /home/pq/build/weston-meson/../../git/weston/compositor/cms-helper.c:91: undefined reference to `cmsEvalToneCurveFloat'
/usr/bin/ld: /home/pq/build/weston-meson/../../git/weston/compositor/cms-helper.c:92: undefined reference to `cmsEvalToneCurveFloat'
/usr/bin/ld: /home/pq/build/weston-meson/../../git/weston/compositor/cms-helper.c:93: undefined reference to `cmsEvalToneCurveFloat'
/usr/bin/ld: compositor/fb12c4d@@cms-colord@sha/cms-helper.c.o: in function `weston_cms_destroy_profile':
/home/pq/build/weston-meson/../../git/weston/compositor/cms-helper.c:108: undefined reference to `cmsCloseProfile'
/usr/bin/ld: compositor/fb12c4d@@cms-colord@sha/cms-helper.c.o: in function `weston_cms_load_profile':
/home/pq/build/weston-meson/../../git/weston/compositor/cms-helper.c:131: undefined reference to `cmsOpenProfileFromFile'
See also #263
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This takes everything that was in 'weston' the executable a turns it into
library. A new trivial 'weston' executable is written.
Creating the library will allow future improvements:
- we can link weston plugins against the library, meaning that they no longer
need unresolved symbols to be allowed during linking
- tests do not have to fork() and exec() 'weston', they can just link to the
library and call wet_main() after setting things up; this will help with
using a debugger
install_rpath is set so that we can install the library into weston's module
directory, away from the normal libraries in a system. This is one library we
do not intend for others to use.
The library has no stable ABI and is not versioned.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We have two kinds of libweston users: internal and external. Weston, the
frontend, counts as an external user, and should not have access to libweston
private headers. The shell plugins are external users as well, because we
intend people to be able to write them. Renderers, backends, and some plugins
are internal users who will need access to private headers.
Create two different Meson dependency objects, one for each kind.
This makes it less likely to accidentally use a private header.
Screen-share is a Weston plugin and therefore counts as an external user, but
it needs the backend API to deliver input. Until we are comfortable exposing
public API for that purpose, let it use internal headers.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
As 'new_subscription' can create additional objects, 'destroy_subscription'
will be needed when cleaning up.
As this requires a libweston_major bump (noticed by @pq), bump it up to
8.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
Define common_inc which includes both public_inc and the project root directory.
The project root directory will allow access to config.h and all the shared/
headers.
Replacing all custom '.', '..', '../..', '../shared' etc. include paths with
common_inc reduces clutter in the target definitions and enforces the common
#include directive style, as e.g. including shared/ headers without the
subdirectory name no longer works.
Unfortunately this does not prevent one from using private libweston headers
with the usual include pattern for public headers.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
When all shared/ headers are included in the same way, we can drop unnecessary
include seach paths from the compiler.
This include style was chosen because it is prevalent in the code base. Doing
anything different would have been a bigger patch.
This also means that we need to keep the project root directory in the include
search path, which means that one could accidentally include private headers
with
#include "libweston/dbus.h"
or even
#include <libweston/dbus.h>
IMO such problem is smaller than the churn caused by any of the alternatives,
and we should be able to catch those in review. We might even be able to catch
those with grep in CI if necessary.
The "bad" include style was found with:
$ for h in shared/*.h; do git grep -F $(basename $h); done | grep -vF '"shared/'
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
When hotunplugging a display, the compositor will tear the top-level
wet_output object down, freeing its memory.
However, destruction of the backend output might be delayed in certain
situations (e.g. destroying DRM output while in the middle of a page
flip).
When the backend output is finally destroyed, it will trigger a
destruction callback previously added by the compositor, which point to
data belonging to the top-level wet_output object.
In order to avoid access to invalid data when the backend output is
destroyed after the top-level wet_output object, remove the destruction
callback from the corresponding list before freeing the object.
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
The member disable_planes of weston_output signifies the recording
status of the output, and is incremented and decremented from various
places. This patch provides helper functions to increment and decrement
the counter. These functions can then be used to do processing, before
and after the recording has started or stopped.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Otherwise 'log_extensions()' will not know how to properly format the
data.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The function pixman_blt may return false in case there is no
accelerated blit function available. In this case the remote shared
screen stays black.
This has been observed on Weston compiled for aarch64. In currrent
pixman 0.38.4 there is no accelerated pixman_blt function for
aarch64 available.
Use pixman_image_composite32 instead which is guaranteed to have a
working fallback implementation.
Fixes: #253
Signed-off-by: Stefan Agner <stefan@agner.ch>
Calculate damage region after resizing the cache image. This
avoids unnecessary calculation of damaged regions on resize,
makes sure that the whole screen is considered damaged on
resize and simplifies error handling.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Calculate y_orig separately first makes it easer to understand the
code and aligns with how pixels are read in screenshooter.c.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Destroy seats when they get removed. This makes sure that seats
properly disappear when screen-share RDP clients disconnect.
There will be no excessive amount of mouse pointer anymore after
several client connection/disconnections.
Signed-off-by: Stefan Agner <stefan@agner.ch>
It is quite similar to the remoting plugin. It just exports the frames via
pipewire instead of the builtin GStreamer pipeline.
It implements the same virtual output API. Virtual outputs can be created
by adding 'pipewire-output' sections to weston.ini.
The generated frames can be accessed with any pipewire client. e.g. with
GStreamer:
gst-launch-1.0 pipewiresrc ! video/x-raw,format=BGRx ! ...
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Place the subscribe parts and displaying of available scopes out of
main as it makes no sense to keep them there.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Uses (debug key-binding mod+shift+space) KEY_D to display/dump
the contents of the flight recorder.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Logging should start as early as possible so create the log scope as
early as possible, before subscribing to it.
Open the logfile before creating the 'logger' subscriber, making sure
we're logging to the file properly.
Also migrate `weston_log_set_handler()` to avoid potential calls to
`weston_log` before installing the log handler.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Destroying the compositor after destroying the log scope will not print
out the messages in the tear down/clean-up phase of the compositor, so
add a new tear_down function which allows keeping a valid reference to
the compositor. This way we can destroy the compositor before destroying
the scope and keep the debug messages.
While at it remove the log context destroy part from the clean-up
of the compositor and make it stand on its own.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Pass log scopes from the command line to subscribe log scopes
dynamically to the 'logger' subscriber.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
config-parser.h is a helper API that libweston core must never depend on. Using
it is a compositor frontend decision.
Including it in libweston.h would give the wrong message.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Allow a gstreamer pipeline to be configurable via an weston.ini. It is
necessary that source is appsrc, its name is "src", and sink name is
"sink" in pipeline. Also, remoting plugin ignore port and host
configuration if the gst-pipeline is specified.
This patch enables a user to opt for HDCP per output, by writing into
the output section of weston.ini configuration file. HDCP is always
enabled by default for the outputs.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
By default the client communicates its preference with regards to
compression to the server. However, some clients always use
compression, which is not ideal for certain environments (e.g.
low performance embedded devices in a local network with plenty
of bandwidth). Allow to disable compression server-side which will
override the clients request for compression.
Signed-off-by: Stefan Agner <stefan@agner.ch>
We were testing the wrong variable to see if output creation had failed:
instead of testing the return of the function we'd just called, we were
testing something we'd already checked earlier.
Signed-off-by: Daniel Stone <daniels@collabora.com>
WESTON_OPTION_BOOLEAN takes a pointer to an int as an argument, but
there were several cases of being passed a pointer to a bool instead.
This changes it to use a local int instead, and then write that value to
the bool.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
As we transition towards a more generic API for weston loggging
framework rename weston_debug_compositor to weston_log_context to show
the fact that this is not really debug but a logging context.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This patch allows initialization of weston-debug/log framework much earlier
than weston_compositor, which in turn will provide the option start
logging before weston_compositor has been created.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The printf() format specifier "%m" is a glibc extension to print
the string returned by strerror(errno). While supported by other
libraries (e.g. uClibc and musl), it is not widely portable.
In Weston code the format string is often passed to a logging
function that calls other syscalls before the conversion of "%m"
takes place. If one of such syscall modifies the value in errno,
the conversion of "%m" will incorrectly report the error string
corresponding to the new value of errno.
Remove all the occurrences of the specifier "%m" in Weston code
by using directly the string returned by strerror(errno).
While there, fix some minor indentation issue.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
This is an installed public header, and without the subdir would surely
conflict with something else.
include/libweston/meson.build is necessary for putting the generated header in
the right subdirectory so that '#include <libweston/version.h>' can work.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
It is a public installed header used by libweston.h.
See "Rename compositor.h to libweston/libweston.h" for rationale.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The backend headers are renamed from compositor-foo.h to backend-foo.h to
better describe their purpose. These headers are public libweston API for each
specific backend.
The headers will also be used like
#include <libweston/backend-drm.h>
instead of
#include <compositor-drm.h>
to give them a more explicit namespace.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The main idea is to make libweston users use the form
#include <libweston/libweston.h>
instead of the plain
#include <compositor.h>
which is prone to name conflicts. This is reflected both in the installed
files, and the internal header search paths so that Weston would use the exact
same form as an external project using libweston would.
The public headers are moved under a new top-level directory include/ to make
them clearly stand out as special (public API).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
build path ends in the final binary package causing the
build not to be reproducible byte-by-byte.
Reference:
https://bugs.debian.org/899358
Signed-off-by: Héctor Orón Martínez <zumbi@debian.org>
Weston 6.0.0 was released with both autotools and Meson build systems. That
should be enough for downstream to migrate to Meson build on their on pace.
Maintaining two build systems is a hassle, keep the one that is easier to work
with and let the other one go.
doc/dozygen/tool*.doxygen.in are not deleted, because they have not been
integrated with Meson yet.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
cms-colord.c calls things like g_string_free() and g_object_unref(), so it
needs to link glib-2.0 and gobject-2.0 explicitly, instead of relying on colord
pkg-config bringing them in.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We loaded the use-pixman configuration value from both the command line
and the configuration file, but completely ignored the former. Make sure
we actually use both.
Tested with all permutations of config/command line.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
When building screen-share module with meson loading the module
fails with:
[00:01:28.604] Failed to load module: /usr/local/lib/weston/screen-share.so: undefined symbol: os_create_anonymous_file
Failed to process Wayland connection: Broken pipe
failed to create display: Broken pipe
The function os_create_anonymous_file is defined in libshared,
adding libshared to the dependency makes sure the function gets
compiled into screen-share.so.
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/208
Signed-off-by: Stefan Agner <stefan@agner.ch>
If xwayland is disabled, compositor/weston is built without
compositor/xwayland.c, which defines wet_load_xwayland.
compositor/fb12c4d@@weston@exe/main.c.o: In function `main':
../weston-5.0.0-169-g2d4cc4f4dd6a/compositor/main.c:3103: undefined reference to `wet_load_xwayland'
Provide an empty stub for wet_load_xwayland if xwayland is disabled.
With that we also have to remove xwayland.c from the autotools build
if xwayland is disabled, to avoid a multiple definition error.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This is so that, for instance, people using weston as their main Wayland
compositor can invert the sense of two finger scrolling or change
pointer acceleration using weston.ini, rather than having to edit C
code.
All of the options that libinput itself exposes through its API are now
exposed in weston.ini. The new options are called `tap-and-drag`,
`tap-and-drag-lock`, `disable-while-typing`, `middle-emulation`,
`left-handed`, `rotation`, `accel-profile`, `accel-speed`,
`scroll-method`, `natural-scroll`, and `scroll-button`. I have
successfully tested everything except for `rotation`, out of a lack of
hardware support.
weston now depends directly on libevdev for turning button name strings into
kernel input codes. This was needed for the `scroll-button` config
option. (weston already depends indirectly on libevdev through
libinput, so I figured people would be OK with this.) As a practical
matter for debian-style packagers, weston now has a build dependency on
libevdev-dev.
Right now, the code applies the same options to all attached devices
that a given option is relevant for. There are plans for multiple
[libinput] sections, each with different device filters, for users who
need more control here.
Signed-off-by: Eric Toombs <3672-ewtoombs@users.noreply.gitlab.freedesktop.org>
This is to increase consistency in config option naming in weston.ini.
(Prefer hyphens over underscores to separate words.)
If enable_tap is present in weston.ini, an obnoxious error message is
logged with weston_log(). In terms of configuration, if enable-tap is
present, enable_tap is ignored.
Signed-off-by: Eric Toombs <3672-ewtoombs@users.noreply.gitlab.freedesktop.org>
Pixman can be used for rendering if the default GLESv2 rendering
is broken or cannot be used.
Pixman-based rendering is already available with the command-line
switch '--use-pixman'. This patch adds support for this option to
the configuration file. Putting
[core]
use-pixman=true
into 'weston.ini' enables pixman-based rendering for all backends
that support it. With this change, pixman has to be enabled only
once.
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/27
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Meson links with the C compiler, not the raw linker.
With clang+LLD, the bare flag would be ignored.
Signed-off-by: Greg V <greg@unrelenting.technology>
Previously weston-screenshooter was installed in LIBEXECDIR, but given
that now it can be invoked by the user whenever debug protocol is
enabled, let's intall it into BINDIR. This way, it can be invoked
without the need to modify PATH.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
This allows to possibility to specify where to look for the executable
but also simplifies the need of having to pass either BINDIR/LIBEXECDIR
for retrieving full-path of the executable.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
Screenshots of the outputs can only be taken by having a keyboard
plug-ed in, as to avoid potential malicious intent. On the other hand,
this is problematic as there are cases where a keyboard cannot
be used as a input device. A particular use-case is that for
multiple devices it can be cumbersome to connect a keyboard such
that using ssh can be much easier and can be further automated.
This patch allows taking screenshots without the need of having a
keyboard connected when debug protocol is enabled.
Add also a few words about the fact that this is a serious issue
and can lead to silently leaking the output contents.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
Meson is a build system, currently implemented in Python, with multiple
output backends, including Ninja and Make. The build file syntax is
clean and easy to read unlike autotools. In practise, configuring and
building with Meson and Ninja has been observed to be much faster than
with autotools. Also cross-building support is excellent.
More information at http://mesonbuild.com
Since moving to Meson requires some changes from users in any case, we
took this opportunity to revamp build options. Most of the build options
still exist, some have changed names or more, and a few have been
dropped. The option to choose the Cairo flavour is not implemented since
for the longest time the Cairo image backend has been the only
recommended one.
This Meson build should be fully functional and it installs everything
an all-enabled autotools build does. Installed pkg-config files have
some minor differences that should be insignificant. Building of some
developer documentation that was never installed with autotools is
missing.
It is expected that the autotools build system will be removed soon
after the next Weston release.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Remoting plugin support streaming image of virtual output on drm-backend
to remote output. By appending remote-output section in weston.ini,
weston loads remoting plugin module and creates virtual outputs via
remoting plugin. The mode, host, and port properties are configurable in
remote-output section.
This plugin send motion jpeg images to client via RTP using gstreamer.
Client can receive by using following pipeline of gst-launch.
gst-launch-1.0 rtpbin name=rtpbin \
udpsrc caps="application/x-rtp,media=(string)video,clock-rate=(int)90000,
encoding-name=JPEG,payload=26" port=[PORTNUMBER] !
rtpbin.recv_rtp_sink_0 \
rtpbin. ! rtpjpegdepay ! jpegdec ! autovideosink \
udpsrc port=[PORTNUMBER+1] ! rtpbin.recv_rtcp_sink_0 \
rtpbin.send_rtcp_src_0 !
udpsink port=[PORTNUMBER+2] sync=false async=false
where, PORTNUMBER is specified in weston.ini.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Xwayland block SIGUSR1 signal for handling this signal. However, if some
weston plugins creates additional threads before xwayland is loaded,
this signal get delivered these threads and causes weston quit.
Therefore, we should set up SIGUSR1 blocking early so that these threads
can inherit the setting when created.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
We are currently formatting 32-bit signed integers into 8 byte buffers,
which are too small, causing the compiler to complain. Update the buffer
size to the minimum required value of 12 bytes: 1 for the sign, 10 for
the number, and 1 for the null byte terminator.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Keep non-desktop heads representing e.g. head mounted displays turned off by
default. When using the DRM backend they can still be enabled by setting an
explicit [output] mode (or "mode=preferred") in weston.ini.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Weston should not exit if stdin is a closed stream. This allows
to launch with a closed stdin:
# weston <&-
This fixes screen sharing using weston: Weston closes the stdin
before forking itself to execute the screen sharing instance of
weston. Before this patch screen sharing failed with:
Screen share failed: No wl_shm found
unknown child process exited
Fixes: f0d39b2243 ("weston: Set CLOEXEC on stdin")
Signed-off-by: Stefan Agner <stefan@agner.ch>
This is better than running Weston with WAYLAND_DEBUG=server:
- It is enabled on demand, no unnecessary flooding and no need to
restart the compositor if debug was enabled.
- It prints client pointers so that messages with different clients can
be seen apart.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
parse and print message arguments in protocol_log_fn
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This registers a new weston-debug scope "log" through which one can get
live log output interspersed with possible other debugging prints. This
is implemented by passing the format and varargs received in our usual
logging entrypoints through to the debug scope as well.
Anywhere where the varargs set is used twice (once for vfprintf, another
for the debug scope), we copy the va_list in order to avoid reusing it,
which leads to memory safety issues.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Let users enable the compositor debug protocol on the compositor command
line. This allows weston-debug tool to work.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We've always had "send_keymap" internally, but some places failed to use
it. Since we also use this in the text backend, export it.
Reviewed-by: Daniel Stone <daniels@collabora.com>
During de-init ensure removal of added signals from list. Otherwise
a dongling pointer is left behind which will affect other plugins.
Signed-off-by: Harsha M M <harsha.manjulamallikarjun@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The framebuffer backend now detects the framebuffer device
dynamically. Don't assume that the framebuffer device is /dev/fb0
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This allows the fbdev backend to run on, and use devices from the
specified seat, similar to the drm backend.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This will allow the seat to be set by the environment as pam_systemd typically
sets the XDG_SEAT variable
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Add a new boolean output section key "force-on". When set to true, the
output will be enabled regardless of connector status. This is the
opposite of the mode=off setting.
Forcing connectors on is useful in special circumstances: avoid output
configuration changes due to hotplug e.g. with KVM switches, or hardware
with unreliable connector status readout for example.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Add a new output section key "same-as" for configuring clone mode. An
output marked "same-as" another output will be configured identically to
the other output.
The current implementation supports only CRTC sharing for clone mode.
Independent CRTC clone mode cannot be supported until output layout
logic is moved from libweston into the frontend and libweston's damage
tracking issues stemming from overlapping outputs are solved.
Quite a lot of infrastructure is needed to properly configure clone
mode. The implemented logic allows easy addition of independent CRTC
clone mode once libweston supports it. The idea is that wet_layoutput is
the item to be laid out and all weston_outputs a wet_layoutput
contains show exactly the same area of the desktop.
The configuration logic attempts to automatically fall back to creating
more weston_outputs when all heads do not work under the same
weston_output. For now, the fallback path ends with an error message.
Enabling a weston_output is bit complicated, because one needs to first
collect all relevant heads, try to attach them all to the weston_output,
and then back up head by head until enabling the weston_output succeeds.
A new weston_output is created for the left-over heads and the process
is repeated.
CRTC-sharing clone mode is the most efficient clone mode, offering
synchronized scanout timings, but it is not always supported by
hardware.
v10:
- rebased trivial conflicts in man page
- switch to gitlab issue URL
v9:
- replace weston_compositor_set_heads_changed_cb() with
weston_compositor_add_heads_changed_listener()
- remove workaround in simple_head_enable()
v6:
- Add man-page note about cms-colord.
- Don't create an output just to turn it off.
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/22
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Now that WESTON_MODULE_MAP supersedes WESTON_BUILD_DIR for libexec
binaries, we don't need to check in WESTON_BUILD_DIR anymore.
There was only one user of weston_config_get_libexec_dir(), so remove
the whole function. There is no reason to export it.
Due to libshared.la being pulled into libweston, this probably was
libweston ABI unintended. Regardless, libweston major has already been
bumped.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Rather than having a hardcoded dependency on the build-directory layout,
use an explicit module-map environment variable, which rewrites requests
for modules and helper/libexec binaries to specific paths.
Pekka: This will help with migration to Meson where setting up the paths
according to autotools would be painful and unnecessary.
Emre: This should also help setting up the test suite after a
cross-compile.
Pekka: A caveat here is that this patch makes it slightly easier to load
external backends by abusing the module map. External backends are
specifically not supported in libweston.
Signed-off-by: Daniel Stone <daniels@collabora.com>
v2:
Fixed ivi_layout-test-plugin.c:wet_module_init().
Do not change the lookup name of ivi-layout.ivi.
Improved documentation of weston_module_path_from_env() and made it cope
with map strings that a) do not end with a semicolon, and b) have
multiple consecutive semicolons.
Let WESTON_MODULE_MAP be printed into the test log so that it is easier
to run tests manually.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Suggested by Emil: Use a variable for strlen(name).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Triggered by weston --help, the usage() output should not look like an error.
Note that there is only one caller of usage() at the moment, but let's handle
this here based on the status in case we add other cases.
https://gitlab.freedesktop.org/wayland/weston/issues/112
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add an option to enable the touchscreen calibrator interface. This is a
global on/off toggle, in lack of more fine-grained access restrictions.
As Weston should not hardcode system specifics, the actual permanent
saving of a new calibration is left for a user supplied script or a
program. Usually this script would write an appropriate udev rule to set
LIBINPUT_CALIBRATION_MATRIX for the touch device.
Co-developed by Louis-Francis and Pekka.
v2:
- use syspath instead of devpath
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Allows to control the Pixman-renderer shadow framebuffer usage from
weston.ini. It defaults to enabled, and whether it is a good idea to
disable or not depends on the platform and the workload.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Rename user_data to wet, because it is called wet everywhere else.
Drop the local variable ec, because that is available as wet.compositor.
This models a little better that wet_compositor owns weston_compositor,
and not the other way around.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This makes it easier to just pass wet_compositor around and take the
weston_compositor from it.
It feels weird to go from weston_compositor to wet_compositor all the
time in internal functions. It's necessary in callbacks that cannot
carry wet_compositor, but otherwise it is awkward.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The signal has been replaced with the heads_changed hook and is no
longer useful.
weston_pending_output_coldplug() is renamed to
weston_compositor_flush_heads_changed() for two reasons: it better
describes what it does now, and it serves as an obvious flag that
libweston ABI has been broken.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Rename the function pointer to create_head() because that is what it
does on backends that are converted to the head-based API. Update the
documentation to match.
Surprisingly this is not an ABI break, as the function behaviour and
signature remain intact. Hence API_NAME is not bumped.
This is only an API break, and main.c is fixed accordingly.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the DRM frontend to use the simple head-based output
configurator, maintaining the exact same features and semantics as
before.
This is an intermediate step. It is unoptimal to create a weston_output
just to turn it off, but the libweston implementation and the DRM
backend require it for now. In the future, the DRM frontend will get its
own configurator that does not create useless weston_outputs and
supports clone mode by attaching multiple heads to the same
weston_output. Clone mode is not yet supported by libweston/DRM.
Until we remove the need to create a weston_output just to turn it
"off", that is, disable it, we will hit simple_head_enable() for heads
we have already disabled. As long as the DRM-backend conversion to the
head-based API is not complete, attempting to create an output for a
head again would lead to a crash. This problem does not exist right now,
but it will after the patch "compositor-drm: start migration to
head-based output API". Therefore, check if the head we are about to
process is already attached, and do nothing if so. DRM outputs set to
"off" are the only ones legitimately hitting this condition.
This is the last frontend migrated, wet_set_pending_output_handler() is
deleted as dead code.
v9:
- Add the workaround in simple_head_enable().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v6 Reviewed-by: Ian Ray <ian.ray@ge.com>
v7 Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the RDP frontend to use the new head-based output configuration
API: listen for heads_changed, and process all heads.
v7:
- remove unnecessary 'goto out' in load_rdp_backend()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the fbdev frontend to use the new head-based output
configuration API: listen for heads_changed, and process all heads.
v7:
- remove unnecessary 'goto out' in load_fbdev_backend()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the Wayland frontend to use the new head-based output
configuration API: listen for heads_changed, and process all heads.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the x11 frontend to use the new head-based output configuration
API: listen for heads_changed, and process all heads.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the headless frontend to use the new head-based output
configuration API: listen for heads_changed, and process all heads.
The simple_heads_changed() function is written to be able to cater for
all backends. The rest will be migrated individually.
The head destroy listeners are not exactly necessary, for headless
anyway, but this is an example excercising the API. Also
is_device_changed() check is mostly useful with DRM.
v8:
- replace weston_compositor_set_heads_changed_cb() with
weston_compositor_add_heads_changed_listener()
- fix comment on wet_head_tracker_create()
v3: Print "Detected a monitor change" only for enabled heads.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v6 Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Move the call out of wet_configure_windowed_output_from_config() and
into its callers.
This allows to migrate each frontend one by one.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
The 'head' member of 'struct weston_output' is going to go unused and
then disappear, so stop using it and find a head from the proper list.
However, this leaves a problem in cms-colord: if you have multiple
monitors driver with the same CRTC, what do you say to the color
management system? The monitors could be different, but all the color
LUTs etc. are in the CRTC and are shared, as is the framebuffer.
Do the simple hack here and just use whatever head happens to be the
first in the list.
The warning is printed in get_output_id(), because if heads are added or
removed while the output is enabled, the id could change.
v6:
- add weston_output_get_first_head(), at first use
- add warning message for nr. heads > 1
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
The user data of a wl_resource representing a wl_output protocol object
used to be a pointer to weston_output. Now that weston_output is being
split, wl_output more accurately refers to weston_head which is a single
monitor.
Change the wl_output user data to point to weston_head.
weston_output_from_resource() is replaced with
weston_head_from_resource().
This change is not strictly necessary, but architecturally it is the
right thing to do. In the future there might appear the need to refer to
a specific head of a cloned pair, for instance.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
In order to support clone modes, libweston needs the concept of a head
that is separate from weston_output. While weston_output manages buffers
and the repaint state machine, weston_head will represent a single
monitor. In the future it will be possible to have a single
weston_output drive one or more weston_heads for a clone mode that
shares the framebuffers between all cloned heads.
All the fields that are obviously properties of the monitor are moved
from weston_output into weston_head.
As moving the fields requires one to touch all the backends for all the
assingments, introduce setter functions for them while we are here. The
setters are identical to the old assignments, for now.
As a temporary measure, weston_output embeds a single head. Also the
ugly casts in weston_head_set_monitor_strings() will be removed by a
follow-up patch.
Libweston major version is bumped, because weston_output struct layout
is changed.
v7:
- Bump libweston major version.
v6:
- adapt to upstream changes in weston_output_set_transform()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
v6 Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Ensure the server can safely handle client requests for wl_seat resource
that have become inert due to weston_seat object release and subsequent
destruction.
The clean-up involves, among other things, unsetting the destroyed
weston_seat object from the user data of wl_seat resources, and handling
this NULL user data case where required.
The list of sites extracting and using weston_seat object from wl_seat
resources which were audited for this patch are:
Legend:
N/A = Not Applicable (not implemented by weston)
FIXED = Fixed in the commit
OK = Already works correctly
== keyboard_shortcuts_inhibit_unstable_v1 ==
[N/A] zwp_keyboard_shortcuts_inhibit_manager_v1.inhibit_shortcuts
== tablet_input_unstable_v{1,2} ==
[N/A] zwp_tablet_manager_v{1,2}.get_tablet_seat
== text_input_unstable_v1 ==
[FIXED] zwp_text_input_v1.activate
[FIXED] zwp_text_input_v1.deactivate
== wl_data_device ==
[FIXED] wl_data_device_manager.get_data_device
[OK] wl_data_device.start_drag
[FIXED] wl_data_device.set_selection
[OK] wl_data_device.release
== wl_shell ==
[FIXED] wl_shell_surface.move
[FIXED] wl_shell_surface.resize
[FIXED] wl_shell_surface.set_popup
== xdg_shell and xdg_shell_unstable_v6 ==
[FIXED] xdg_toplevel.show_window_menu
[FIXED] xdg_toplevel.move
[FIXED] xdg_toplevel.resize
[FIXED] xdg_popup.grab
== xdg_shell_unstable_v5 ==
[FIXED] xdg_shell.get_xdg_popup
[FIXED] xdg_surface.show_window_menu
[FIXED] xdg_surface.move
[FIXED] xdg_surface.resize
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Catching an ABRT is kind of ok, catching a SEGV is russian roulette. We
have been quite lucky with it, but I've started hitting crashes inside
malloc() which causes a deadlock when our SEGV handler needs to malloc()
as well (weston_log_timestamp()).
One reason to catch SEGV and ABRT was to attempt to restore the VT on
the DRM-backend. Nowadays that job is done by logind or weston-launch.
The signal handler also printed a backtrace, which for me personally has
been extremely helpful. Arguably it's not necessary though, when we have
core files and services that catch cores. For instance, if using
systemd, 'coredumpctl gdb' is delightfully easy for getting into the
saved core.
Therefore, this code does more harm than it is useful, so remove it. We
also drop an optional dependency to libunwind.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Developers with testing rigs having multiple graphics cards plugged in
often want to test things on a specific card. We have ways to choose a
card through seat assignments, but configuring that run by run is
awkward.
Add a command line option for opening a specific DRM device.
v2: call it --drm-device instead of --device
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Previously, the hide_input_panel and show_input_panel messages for the text
input protocol were limited to specific cases, such as showing the panel on
activation, or making the panel visible after activation. Now, clients are
allowed to toggle the panel visiblity at will as long as they are the currently
active client
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Tested-by: Silvan Jegen <s.jegen@gmail.com>
Reviewed-by: Jan Arne Petersen <janarne@gmail.com>
When you need to start Weston via weston-launch, systemd unit, or any
other runner, it is annoying to try to get in with a debugger,
especially if the thing you are interested in happens at start-up. To
make it easy, a new option is introduced.
The new option, implemented both as a command line option and a
weston.ini option, raises SIGSTOP early in the start-up, before the
weston_compositor has been created. This allows one to attach a debugger
at a known point in execution, and resume execution with SIGCONT.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Ian Ray <ian.ray@ge.com>
It is useful to print the backtrace regardless of whether we have a
compositor and a backend initialized yet. Move catch_signals() to the
earliest point in main() and protect the SEGV handler from dereferencing
NULL when we don't yet have a compositor or a backend.
The SEGV handler uses weston_log(), so cannot move catch_signals() any
earlier.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Change weston_compositor_get_time to return the current compositor time
as a struct timespec. Also, use clock_gettime (with CLOCK_REALTIME) to
get the time, since it's equivalent to the currently used gettimeofday
call, but returns the data directly in a struct timespec.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to key events to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to axis events to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to button events to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to motion events to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Surprisingly, WESTON_OPTION_BOOLEAN uses the type int32_t, not bool.
Passing in a pointer bool does not end well. Fix this to pass in
pointers as parse_options() expects.
This fixes a bug where 'weston --use-pixman --sprawl' would work but
'weston --sprawl --use-pixman' would ignore the --sprawl option.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Remove the option, because it is hard to use.
Drm connector ids are hard to reach for users,
and they can change when kernel or device tree
is modified.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[Pekka: bump WESTON_DRM_BACKEND_CONFIG_VERSION]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This is a simple wrapper for casting the user data of a wl_resource into
a struct weston_output pointer. Using the wrapper clearly marks all the
places where a wl_output protocol object is used.
Replace ALL wl_output related calls to wl_resource_get_user_data() with
a call to weston_output_from_resource().
v2: add type assert in weston_output_from_resource().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
We don't want to leak this into apps launched from the panel.
stdout and stderr are left for now because some things launched
by weston - such as weston-keyboard - share weston's log by
printing to those fds.
I'm singling out stdin because it's never needed by a child process
and because it's value is 0, which makes it easy to accidentally
do bad things to (commit 5c611d933f)
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Weston will not repaint until previous update has been acked by a
pageflip event coming from the drm driver. However, some buggy drivers
won’t return those events or will stop sending them at some point and
Weston output repaints will completely freeze. To ease developers’ task
in testing their drivers, this patch makes compositor-drm use a timer
to detect cases where those pageflip events stop coming.
This timeout implementation is software only and includes basic
features usually found in a watchdog. We simply exit Weston gracefully
with a log message and an exit code when the timout is reached.
The timeout value can be set via weston.ini by adding a
pageflip-timeout=<MILLISECONDS> entry under [core]
section. Setting it to 0 disables the timeout feature.
v2:
- Made sure we would get both the pageflip and the vblank events before
stopping the timer.
- Reordered the error and success cases in
drm_output_pageflip_timer_create() to be more in line with the rest
of the code.
v3:
- Reordered (de)arming of the timer with the code around it to avoid it
being rearmed before the current dearming.
- Return the proper value for the dispatcher in the pageflip_timeout
callback.
- Also display the output name in case the timer fires.
v4:
- Reordered a forgotten timer rearming after its drmModePageFlip().
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=83884
Signed-off-by: Frederic Plourde <frederic.plourde at collabora.co.uk>
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Destroying the shared seat removes the link from so->seat_list.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Don't try to dereference the seat if it's NULL.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
The parameter is passed in safe_strtoint function.
The function expects its parameters in int32_t
data type. Therefore, c compiler throws a
-Wincompatible-pointer-type warning.
This patch changes data type of the parameter
to int32_t.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It got lost during the porting to the config API.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Most display managers handle starting a dbus session daemon for you, so
it does not make sense to start our own. Without this patch, if you run
weston from gdm, programs cannot connect to the dbus session daemon.
Reviewed-by: Daniel Stone <daniels@collabora.com>
This avoids loading a shell as a module, so we are sure to have only one
shell loaded at a time.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Use different functions so we cannot load a libweston common module in
weston directly or the other way around.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Avoid any buffer overflows here by checking we don't go over PATH_MAX
with stupid module names.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If we destroy the text_input (e.g. due to surface deactivation) whilst
the IM manager (the client holding the input_method_context resource,
usually weston-keyboard) sends an event, we can hit a segfault in
text-backend. This is because we free the text_input structure, but
don't actually clear the context->input structure even when we send the
deactivate event.
This is clearly intended to be catered for, since context->input is
always checked for NULL before we relay any events.
This is enough to fix one cause of text-test failing, but it's
ultimately error-prone until we have a no-op test-shell; there is still
a race where weston-desktop-shell can launch weston-keyboard before
text-test manages to bind zwp_text_input_manager.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Maniphest Tasks: https://phabricator.freedesktop.org/T7615
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
As it has been discussed in the past [1], running Weston
without any input device at launch might be beneficial for
some use cases.
Certainly, it's best for the vast majority of users (and
the project) to require an input device to be present, as
to avoid frustration and hassle, but for those brave souls
that so prefer, this patch lets them run without any input
device at all.
This introduces a simple configuration in weston.ini:
[core]
require-input=true
True is the default, so no behavioral change is introduced.
[1] https://lists.freedesktop.org/archives/wayland-devel/2015-November/025193.html
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This is a complete port of the X11 backend that
uses recently added output handling API for output
configuration.
- Output can be configured at runtime by passing the
necessary configuration parameters, which can be
filled in manually, obtained from the configuration
file or obtained from the command line using
previously added functionality. It is required that
the scale and transform values are set using the
previously added functionality.
- Output can be created at runtime using the output
API. The output creation only creates a pending
output, which needs to be configured the same way as
mentioned above.
Same as before, a single output is created at runtime
using the default configuration or a configuration
parsed from the command line. The output-count
functionality is also preserved, which means more than
one output can be created initially, and more outputs can
be added at runtime using the output API.
v2:
- Fix wet_configure_windowed_output_from_config() usage.
- Call x11_output_disable() explicitly from
x11_output_destroy().
v3:
- Remove unneeded free().
- Disallow calling x11_output_configure more than once.
- Remove unneeded checks for output->name == NULL as that
has been disallowed.
- Use weston_compositor_add_pending_output().
- Bump weston_x11_backend_config version to 2.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
This is a complete port of the Wayland backend that
uses the recently added output handling API for output
configuration.
- Output can be configured at runtime by passing the
necessary configuration parameters, which can be
filled in manually, obtained from the configuration
file or obtained from the command line using
previously added functionality. It is required that
the scale and transform values are set using the
previously added functionality.
- Output can be created at runtime using the output
API. The output creation only creates a pending
output, which needs to be configured the same way as
mentioned above.
However, the backend can behave both as windowed backend
and as a backend that issues "hotplug" events, when
running under fullscreen shell or with --sprawl command
line option. The first case was covered by reusing
previously added functionality. The second case required
another API to be introduced and implemented into both
the backend and compositor for handling output setup.
After everything has been set, output needs to be
enabled manually using weston_output_enable().
v2:
- Fix wet_configure_windowed_output_from_config() usage.
- Call wayland_output_disable() explicitly from
wayland_output_destroy().
v3:
- Get rid of weston_wayland_output_api and rework output
creation and configuration in case wayland backend is
started with --sprawl or on fullscreen-shell.
- Remove unneeded free().
- Disallow calling wayland_output_configure more than once.
- Remove unneeded checks for output->name == NULL as that
has been disallowed.
- Use weston_compositor_add_pending_output().
v4:
- Drop unused fields from weston_wayland_backend_config
and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2.
- Move output creation to backend itself when
--fullscreen is used.
- Prevent possible duplicated output names by assigning
a different name to outputs created without any
configuration specified.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This is a complete port of the RDP backend that uses
the recently added output handling API for output
configuration.
Output can be configured at runtime by passing the
necessary configuration parameters, which can be
filled in manually or obtained from the command line
using previously added functionality. It is required
that the scale and transform values are set using
the previously added functionality.
After everything has been set, output needs to be
enabled manually using weston_output_enable().
v2:
- Rename output_configure() to output_set_size()
in plugin API and describe it.
- Manually fetch parsed_options from wet_compositor.
- Call rdp_output_disable() explicitly from
rdp_output_destroy().
v3:
- Disallow calling rdp_output_set_size more than once.
- Manually assign a hardcoded name to an output as that's
now mandatory.
- Use weston_compositor_add_pending_output().
- Bump weston_rdp_backend_config version to 2.
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
This is a complete port of the headless backend that
uses the recently added output handling API for output
configuration.
- Output can be configured at runtime by passing the
necessary configuration parameters, which can be
filled in manually, obtained from the configuration
file or obtained from the command line using
previously added functionality. It is required that
the scale and transform values are set using the
previously added functionality.
- Output can be created at runtime using the output
API. The output creation only creates a pending
output, which needs to be configured the same way as
mentioned above.
After everything has been set, output needs to be
enabled manually using weston_output_enable().
Same as before, a single output is created at runtime
using the default configuration or a configuration
parsed from the command line. The no-outputs
functionality is also preserved, which means that no
output will be created initially, but more outputs can
be added at runtime using the output API.
New feature:
This patch also adds, as a bonus of using shared
functionality, support for setting options for outputs
created by this backend in the weston config file in
addition to setting them from the command line.
v2:
- Fix wet_configure_windowed_output_from_config() usage.
- Call headless_output_disable() explicitly from
headless_output_destroy().
v3:
- Add scale support to output width and height.
- Use scaled values in calls to various functions which
require width and height.
- Disallow calling headless_output_configure more than once.
- Remove unneeded checks for output->name == NULL as that
has been disallowed.
- Use weston_compositor_add_pending_output().
- Bump weston_headless_backend_config version to 2.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
This is a complete port of the fbdev backend that uses
the recently added output handling API for output
configuration.
It is required that the scale and transform values are
set using the previously added functionality.
After everything has been set, output needs to be
enabled manually using weston_output_enable().
v2:
- Use weston_compositor_add_pending_output().
- Bump weston_fbdev_backend_config version to 2.
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
This is a complete port of the DRM backend that uses
the recently added output handling API for output
configuration.
Output can be configured at runtime by passing the
necessary configuration parameters, which can be
filled in manually or obtained from the configuration
file using previously added functionality. It is
required that the scale and transform values are set
using the previously added functionality.
After everything has been set, output needs to be
enabled manually using weston_output_enable().
v2:
- Added missing drmModeFreeCrtc() to drm_output_enable()
cleanup list in case of failure.
- Split drm_backend_disable() into drm_backend_deinit()
to accomodate for changes in the first patch in the
series. Moved restoring original crtc to
drm_output_destroy().
v3:
- Moved origcrtc allocation to drm_output_set_mode().
- Swapped connector_get_current_mode() and
drm_output_add_mode() calls in drm_output_set_mode()
to match current weston.
- Moved crtc_allocator and connector_allocator update
from drm_output_enable() to create_output_for_connector()
to avoid problems when more than one monitor is connected
at startup and crtc allocator wasn't updated before
create_output_for_connector() was called second time,
resulting in one screen being turned off.
- Moved crtc_allocator and connector_allocator update from
drm_output_deinit() to drm_output_destroy(), as it
should not be called on drm_output_disable().
- Use weston_compositor_add_pending_output().
- Bump weston_drm_backend_config version to 2.
v4:
- Reset output->original_crtc to NULL if drm_output_set_mode()
fails.
- Remove unneeded log message when disabling an output when a
pageflip is pending.
- Document that create_output_for_connector() takes ownership
of the connector.
- Free the connector if create output conditionals are not met
in create_outputs() and update_outputs().
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This implements output configuration for outputs which use
previously added weston_windowed_output_api. The function
takes an output that's to be configured, default configuration
that's to be set in case no configuration is specified in
the config file or on command line and optional third argument,
parsed_options, which will override defaults and options for
configuration if they are present.
This also introduces new compositor specific functions for
setting output's scale and transform from either hardcoded
default, config file option or command line option.
Pending output handling helpers have also been introduced.
v2:
- Adapt to changes in previous patch.
- Fix potential double free().
- Remove redundant variables for scale and transform setting.
- Drop parsed_options helper and parameter and use it directly
in wet_configure_windowed_output_from_config().
v3:
- Remove unneeded checks for output->name == NULL as that
has been disallowed.
- Stop printing mode if it's invalid, as it can be NULL.
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
This tightens up the strtol() error checking in several places where it
is used for parsing environment variables, and in the backlight
interface that is reading numbers from files under /sys/class/backlight.
All of these uses are expecting strings containing decimal numbers and
nothing else, so the error checking can all be tightened up and made
consistent with other strtol() calls.
This follows the error checking style used in Wayland
(c.f. wayland-client.c and scanner.c) and c.f. commit cbc05378.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Use the documented libweston-$major.so.0.$minor.$patch scheme.
An (almost) identical one is used by GLIB, GDK{2,3}, QT5, json-glib and
others.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
This patch makes the compositor user data a structure
which can be expanded with new fields when necessary.
v2:
Don't export to_wet_compositor
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The third arg to strtol() specifies the base to assume for the number.
When 0 is passed, as is currently done in option-parser.c, hexadecimal
and octal numbers are permitted and automatically detected and
converted.
This change is an expansion of f6051cbab8
to cover the remaining strtol() calls in Weston, where the routine is
being used to read fds and pids - which are always expressed in base-10.
It also changes the calls in config-parser, used by
weston_config_section_get_int(), which in turn is being used to read
scales, sizes, times, rates, and delays; these are all expressed in
base-10 numbers only.
The benefit of limiting this to base-10 is to eliminate surprises when
parsing numbers from the command line. Also, by making the code
consistent with other usages of strtol, it may make it possible to
factor out the common code in the future.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch follows a similar approach taken to detach the backends from
weston. But instead of passing a configuration struct when loading the
plugin, we use the plugin API registry to register an API, and to get it
in the compositor side. This API allows to spawn the Xwayland process
in the compositor side, and to deal with signal handling. A new
function is added in compositor.c to load and init the xwayland.so
plugin.
Also make sure to re-arm the SIGUSR1 when the X server quits.
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
[Pekka: moved xwayland/weston-xwayland.c -> compositor/xwayland.c]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This patch adds a new command line option which can be
used to tell headless backend not to create any
virtual outputs.
This will be used for output hotplug emulation, where
weston will start with no outputs available, and the
virtual output will be created at runtime.
v2:
- Use bool instead of int for the indicator flag
- Move final newspace to a separate line in command
line options
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Write the command line to the log to aid debugging. It needs to be
copied before parsing, because parsing mutates argv.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
This is the start of separating weston-the-compositor source files from
libweston source files.
This is moving all the files related to the 'weston' binary. Also the
CMS and systemd plugins are moved.
xwayland plugin is not moved, because it will be turned into a
libweston feature.
To avoid breaking the build, #includes for weston.h are fixed to use
compositor/weston.h. This serves as a reminder that such files may need
further attention: moving to the right directory, or maybe using the
proper -I flags instead.
v2: Move also screen-share.c, and add a note about weston-launch.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
Acked-by: Benoit Gschwind <gschwind@gnu-log.net>
[Pekka: rebased]
This rename addresses a few problems around the split between core
Wayland and the wayland-demos repository.
1) Initially, we had one big repository with protocol code, sample
compositor and sample clients. We split that repository to make it
possible to implement the protocol without pulling in the sample/demo
code. At this point, the compositor is more than just a "demo" and
wayland-demos doesn't send the right message. The sample compositor
is a useful, self-contained project in it's own right, and we want to
move away from the "demos" label.
2) Another problem is that the wayland-demos compositor is often
called "the wayland compsitor", but it's really just one possible
compositor. Existing X11 compositors are expected to add Wayland
support and then gradually phase out/modularize the X11 support, for
example. Conversely, it's hard to talk about the wayland-demos
compositor specifically as opposed to, eg, the wayland protocol or a
wayland compositor in general.
We are also renaming the repo to weston, and the compositor
subdirectory to src/, to emphasize that the main "output" is the
compositor.
This is the other direction. The selection bridge will grab the X11
CLIPBOARD selection on behalf of the Wayland client when it sets the
Wayland selection. Right now only UTF-8 text is supported, but the
data types offered will be taken from the Wayland data source.
We need to store all touchpoint positions so that if we just get an
ABS_MT_POSITION_X or Y event, we can pull the other coordinate from the
cache. And we need this across invocations of evdev_input_device_data(),
so the accumulator approach doesn't work.
Instead, we go back to the approach of storing all this state in the
evdev device struct and we might as well just move the rel and abs state
there too.
This adds ABS_MT_* support for direct touch devices and notifies
the compositor. The compositor has a stub for now.
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
fade_output() is strange in that it manufactures a wlsc_surface object
by hand, and then calls wlsc_surface_draw() on it.
Valgrind complained, that wlsc_surface_draw() accesses uninitialised
data: wlsc_surface::alpha. fade_output() forgets to set it.
Initialise surface.alpha in fade_output(). Specifically, set it to
compositor->current_alpha to deliberatly avoid the gluniform1f() call in
wlsc_surface_draw().
fade_output() binds a different GL shader program than
wlsc_surface_draw() expects. This program does not have a uniform called
"alpha", and the uniform location given in glUniform1f() is not for
this program anyway. A hint of that is the runtime error:
Mesa: User error: GL_INVALID_OPERATION in glUniform(type mismatch)
Fixing this seems to get rid of half a thousand of Valgrind errors, and
of course the Mesa user error.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Not sure why we get these, but it happens for Alt-click to move a window
(metacity binding) and messes up the idle inhibit counter.
FocusOut event as a result of ungrabbing doesn't really make sense and
fortunately we can safely ignore them.
Besides the new header file, there's also a change in the main evdev creation
procedure for a more suggestive name (evdev_input_add_devices ->
evdev_input_create). There's no real functional changes in this commit.
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
