gl_surface_state has a bunch of members which are tied to the input
buffer, rather than the surface per se.
Split them out into a separate gl_buffer_state member as a first step
towards sanitising its use and lifetime.
Signed-off-by: Daniel Stone <daniels@collabora.com>
No-one should be implementing an external renderer, so move the
interface out of the public header.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This value is always `NULL`.
Silences:
`warning: ‘%s’ directive argument is null [-Wformat-overflow=]`
Signed-off-by: Robert Mader <robert.mader@collabora.com>
clang-13 complains about bitwise xor assigments like the following:
../libweston/noop-renderer.c:62:25: warning: variable 'unused' set but
not used [-Wunused-but-set-variable] volatile unsigned char unused = 0;
Use the __attribute__((unused)) instead.
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Similar to how we do it with drm_fb ref counts, increase a reference
count and return the same object.
Plug-in in desktop-shell when we map up the view in order to survive a
weston_surface destruction.
Astute readers will notice that this patch removes weston_view_destroy()
while keeping the balance between removing and adding a
weston_surface_unref() call in desktop_shell_destroy_surface().
The reason is to let weston_surface_unref() handle destruction on its
own. If multiple references are taken, then weston_surface_unref()
doesn't destroy the view, it just decreases the reference, with
a latter call to weston_surface_unref() to determine if the view
should be destroyed as well. This situation happens if we have
close animation enabled, were we have more than one reference taken: one
when mapping the view/surface and when when the surface itself was created,
(what we call, a weak reference).
If only a single reference is taken (for instance if we don't have close
animations enabled) then this weston_surface_unref()
call is inert as that reference is not set-up, leaving libweston to
handle the view destruction.
Following that with a weston_view_destroy() explicit call would cause a
UAF as the view was previous destroyed by a weston_surface_unref() call.
A side-effect of not keeping the weston_view_destroy() call would
happen when tearing down the compositor. If close animations are enabled,
weston_surface_unref() would not destroy the view, and because
weston_view_destroy() no longer exists, we would still have the
view in the other layers by the time we check-up if layers
have views present.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Calling weston_surface_unref() one time too many could be a sign we
haven't correctly increased the ref count for it.
Also, if we don't have a surface being passed, do no attempt to
use it.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Make it obvious that weston_surface has a reference counting happening
and destruction of the weston_surface happens when the last
weston_surface reference has been accounted for.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Unconditionally creating a surface feedback for each surface
creates unnecessary overhead and noise in the logs. Thus
create it when the first surface feedback resource for a
surface is requested and delete it again once all those
resources have been destroyed.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
To me, the use of setup_search_param() makes the code harder to
understand than it needs to be. Replacing that function with open-coding
the struct cmlcms_color_transform_search_param initialization makes it
more clear that:
- get_surface_color_transform is the only one that actually uses a
surface to initialize it
- get_blend_to_output does not use an input profile at all
- get_sRGB_to_output and get_sRGB_to_blend hardcode the sRGB profile
like they should
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
I am going to need to add yet another output property to be set by a
color manager: HDR Static Metadata Type 1. With the old color manager
API design, I would have needed to add the fourth function pointer to be
called always in the same group as the previous three. This seemed more
convoluted than it needs to be.
Therefore collapse the three existing function pointers in the API into
just one that is resposible for setting up all three things.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This new struct collects all the things that a color manager needs to
set up when any colorimetry aspect of an output changes. The intention
is to make the color manager API less verbose.
In this first step, the new struct is added and replaces the fields in
weston_output.
The intention is for the following color manager API changes to
dynamically allocate this structure. Unfortunately, until that actually
happens, we need a temporary way to allocate it. That is
weston_output::colorout_, which will be removed in the next patch. This
keeps the patches more palatable for review at the cost of some
back-and-forth in code changes.
This is a pure refactoring, no functional changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Trying to do HDR with XRGB8888 is a bit like using RGB565 on SDR: you
get visible color quantization and banding in gradients (without dithering
which Weston does not implement yet, and might not work too well for HDR
anyway).
Therefore, on any HDR mode, default output framebuffer format to 10 bpc
instead of 8 bpc.
Ideally we'd also optionally try 16F or 16 bpc formats, but automatic
fallbacks for those are more complicated to arrange. You can still
configure 16F or 16 bpc manually.
This patch also moves the default format setting from
drm_output_set_gbm_format() to drm_output_enable(), because setting the
default now requires eotf_mode. Frontends may call set_gbm_format()
first and set eotf_mode next. This does create an awkward situation for
outputs that a frontend disables and re-enables. This patch here makes
sure that the old output configuration remains, but changing eotf_mode
may not change the default format. One needs to call
set_gbm_format(NULL) to re-evaluate the default format. Resetting the
format on drm_output_deinit() would lose the current setting.
DRM_FORMAT_INVALID was introduced in libdrm 2.4.95 which we already
hard-depend on.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Program the connector property HDR_OUTPUT_METADATA based on the EOTF
mode of the output.
For now, this changes only the EOTF. The colorimetry and luminance are
left undefined, to be filled in by later patches. This should still be
enough to put a video sink into HDR mode, albeit the response is
probably unknown.
drm_output keeps track of the currently existing blob id. If the blob
contents need to be re-created, this blob would be destroyed and the
field set to zero. In this patch, there is no provision for runtime
changing of HDR metadata, so there is no code doing that.
Destroying the blob at arbitrary times is not a problem, because the
kernel keeps a reference to the data as long as the blob id remains with
KMS.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Check whether HDR_OUTPUT_METADATA property exists on a KMS connector. If
yes, pretend that EDID claims support for all EOTF modes and update the
head supported EOTFs mask accordingly. If not, then only SDR is
possible.
Parsing EDID to take monitor capabilities into account is left for
later.
HDR mode cannot be set without HDR_OUTPUT_METADATA.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
These are fallback definitions in case libdrm is not new enough.
They are copied from libdrm 2.4.107.
struct hdr_output_metadata defines the contents of the blob to be used
with the connector property "HDR_OUTPUT_METADATA".
This is needed for programming a HDR mode in KMS.
This headers need to be excluded from Doxygen, because Doxygen chokes on
the kerneldoc markup.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
A reminder that this variable needs to be taken into account when
crafting color transformations.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The no-op color manager will not support any other EOTF mode than SDR.
Other modes would require it to set up color transformations.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The headless backend does not display to anything, so it doesn't care
what the EOTF mode is. To allow testing compositor internal behavior,
claim to support all EOTF modes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is the switch to turn HDR mode on.
The values in the enumeration come straight from CTA-861-G standard.
Monitors advertise support for some of the HDR modes in their EDID, and
I am not aware of any other way to detect if a HDR mode actually works
or not. Different monitors may support different and multiple modes.
Different modes may look different. Therefore the high-level choice of
how to drive a HDR video sink is left for the Weston frontend to decide.
All the details like what HDR metadata to use are left for the color
manager.
This commit adds the libweston API for backends to advertise support and
for frontends to choose a mode. Backend and frontend implementations
follow in other commits.
The frontend API does not limit the EOTF mode to the supported ones to
allow experimentation and overriding EDID.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Even if the weston_buffer_reference is still alive in situations like
when we have closing animations, the underyling buffer (wl_shm_buffer)
is no longer available. Call the appropriate destroy handler to
invalidate the pixman image and avoid touch the shm_buffer.
Fixes: #613
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Synchronize events carry keylock status, so we should update it.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
When RDP indicates that a Japanese keyboard layout is used without
a Japanese 106/109 keyboard (keyboard type 7), use the "us" layout,
since the "jp" layout in xkb expects the Japanese 106/109 keyboard
layout.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
Korean keyboards are keyboard type 8:
https://docs.microsoft.com/en-us/windows/win32/api/winuser/nf-winuser-getkeyboardtype
While type 8 is not explicitly mentioned in the RDP documentation,
it can be sent over the wire. Let's support the variants we can.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
This code will eventually be used by RAIL as well, so let's
split it out now.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
Use the common abnt2 variant, instead of the niche nativo one.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
We move this into a function for when we add horizontal wheel support
later.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
We currently hardcode a 60Hz update rate for the rdp backend.
In some cases it may be useful to override this to increase the rate
for a faster monitor, or to decrease it to reduce network traffic.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
Instead of hard coding a 16ms refresh interval, use the refresh rate
from the current mode to determine when the next frame should be.
Currently, we still hard code the refresh rate, so this will end up
with roughly the same value we've been using, but in the future
we'll allow setting it via command line.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
We already have a way for a single RDP client connection to be
passed from a parent process to a child using a combination
of environment variable (RDP_FD) and env var (--env-socket)
This patch allows a bound socket fd (as opposed to a client
connection) to be established in a parent process and provided
to the rdp backend. WSLg uses this to set up an AF_VSOCK
socket for communication between a Windows RDP client and a
weston compositor running under a hypervisor.
Co-authored-by: Hideyuki Nagase <hideyukn@microsoft.com>
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
These events carry the 4th and 5th mouse buttons, so
we should propagate them. We also need to use pointer
frames to ensure the buttons are properly paired with
the pointer co-ordinates.
Unfortunately, there is no way in RDP to determine if
a mouse event and an extended mouse event should be in
the same pointer frame, so this is the best we can do.
We also enable extended mouse events so they'll be used.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
Rather than punching through to set the surface as a solid colour,
attach an actual weston_buffer to it instead.
This becomes the first user of attaching non-client-generated buffers
to a weston_surface. As a result, it is necessary to introduce a
function which will allow compositors and shells to attach a buffer to a
surface. weston_surface_attach_solid() is therefore introduced as a
special-purpose helper which will attach a solid buffer to a
weston_surface.
It is not intended as a general-purpose mechanism to allow compositors
to attach client-generated buffers to surfaces, as doing so would have
unknown effects on this core part of the compositor itself.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When we're checking to see if a view is suitable to go on a plane, check
for (and reject) solid-colour buffers.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The Pixman renderer keeps its own reference to buffers when attached to
surfaces, through its surface state: just use that instead.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Refactor the buffer-type check slightly so we can handle solid-color
buffers, which we do exactly nothing with.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Currently solid-colour displays (e.g. the background for fullscreen
views) is implemented by a special-case weston_surface which has no
buffer attached, with a special punch-through renderer callback to set
the colour.
Replace this with a weston_buffer type explicitly specifying the solid
colour, which helps us eliminate yet more special cases in renderers and
backends.
This is not handled yet in any renderer or backend, however it is also
not used by anything yet. Following commits add support to the renderers
and backends.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When the renderer/backend indicate that they do not need a surface's
buffer content to be preserved, most often because they have copied it,
simply downgrade the buffer reference to 'will not access', rather than
drop the buffer reference altogether.
Signed-off-by: Daniel Stone <daniels@collabora.com>
In the original conception, a weston_buffer_reference indicated that the
underlying contents of the wl_buffer would or could be accessed, so
wl_buffer.release must not be sent until the last reference was
released, as the compositor may still use it.
This meant that renderers or backends which copied the buffer content -
such as the GL renderer with SHM buffers - could only send a buffer
release event to the client by 'losing' the buffer reference altogether.
The main side effect is that `weston-debug scene-graph` could not show
any information at all about SHM buffers when using the GL renderer, but
it also meant that renderers and backends grew increasingly exotic
structures to cache information about the buffer.
Now that we have an additional buffer-reference mode (still referring to
the weston_buffer/wl_buffer, but not going to access its content), we
can allow the weston_buffer_reference and weston_buffer to live as long
as the buffer itself, even if we do send a release event.
This will enable a bunch of backend and renderer deduplication, as well
as finally making scene-graph more useful.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Add a mode argument to weston_buffer_reference which indicates whether a
buffer's storage may/will be accessed, or whether the underlying storage
will no longer be accessed, e.g. because it has been copied. This will
be used to retain a pointer to the weston_buffer whilst being able to
send a release event to the client.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Keep the weston_buffer alive for as long as at least one of the
underlying wl_buffer or a backend usage exists.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Make sure we don't die if we're asked to flush the damage on a SHM
buffer which has subsequently been destroyed.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We currently allow a weston_buffer to outlive the underlying wl_buffer
iff the renderer/backend has cached it. Currently the 'is this buffer
valid?' test relies on looking for the validity of the weston_buffer
itself; shift these tests to looking at the validity of the underlying
resource.
Signed-off-by: Daniel Stone <daniels@collabora.com>
y_inverted meant that the buffer's origin was (0,0), and non-inverted
meant that the buffer's origin was (0,height). In practice, every buffer
was 'inverted' into our natural co-ordinate space that we use
everywhere.
Switch to using an explicit origin enum to make this more clear.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Rather than calling accessors (wl_shm_buffer_get etc) to figure out
which type our buffer is, just look in the structure.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Rather than open-coding various resource -> type accessors, just stick a
type enum in the buffer struct.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Rather than only filling weston_buffer information when we first come to
use it, add an explicit hook so we can fill the dimensions the first
time the buffer's attached.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Make sure we only import dmabufs where the underlying pixel_format is
known: if we can't reason about the buffer content, we're not entirely
likely to be able to display it well.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When we first see a buffer attached, we create a weston_buffer for it.
The weston_buffer doesn't contain any useful information in and of
itself; that's left to renderers to populate later.
Switch this to doing it in the core at the first opportunity, at least
for SHM and dmabuf buffers; EGL buffers will follow in the next commit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We already have the buffer in the caller, and every no-op implementation
will want to access the buffer. So might as well pass it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The comment about needing to have destroyed images is somewhat less true
now that we actively avoid doing so.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 0b51b02c5e ("gl-renderer: Don't re-import dmabufs")
Add some logging helper functions along with two log scopes for debug
and extremely verbose debugging information.
Also add tangentially related logging for the synchronize event, so
the debug stream isn't empty right now. The vast majority of verbose
usage will come later.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
There are currently compatibility issues between FreeRDP's implementation
of the RemoteFX codec and Microsoft's implementation.
Perhaps this will be fixed in the future and this option can go away,
but for now it's necessary to have a way to disable the codec if the
windows client is going to be connecting to a weston server.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Seems that we're still missing layer clean-ups, with the touch
calibrator being one of them. Call the appropriate function when
shutting down the compositor instance.
Fixes: #603
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Server generated key repeats are ignored - and they don't generate
matching release events. We early return to avoid generating events
for them.
We also need to push the idle inhibition counting after that early
return to prevent breaking idle inhibition with unmatched events.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
Refactor some of rdp.c into a header file.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
We've already allocated the listener by the time we hit this failure,
so we must exit through the path that frees it.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
In 913d7c15f7 stricter error checking was
introduced to the strtol call, which broke reading backlight values.
Since every sysfs backlight file ends with a newline.
As noted in a comment in the previous MR to prevent damaged pointers
after calling asprintf, replace every asprintf call with str_printf.
Previous-MR: https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/543
Signed-off-by: Sören Meier <soerenmeier@livgood.ch>
The repaint_data is entirely backend specific. Moreover, it is only used by the
drm backend, while other backends ignore the repaint data.
There will always be only one repaint active, thus, there is no need to pass the
repaint data from the outside.
The repaint_data breaks with the multi-backend series, which calls repaint begin
for all backends to get the repaint_data. The repaint_data of the last backend
will then be passed to all other backend. At the moment, this works, because the
drm backend is the only backend that implements the begin_repaint call.
Another option would be to track the repaint data per backend in the compositor,
but actually, it the backend needs to track state across the calls, it's its own
responsibility.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
The pending_state is already stored in the backend and can be directly retrieved
from there.
This avoids involving the compositor in passing state between the repaint
phases for a single backend.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Fbdev backend was deprecated in the Weston 10.0.0 release with
6338dbd581. Before that, I suggested
already in 2019 to remove it, but it was too soon then. Now it seems the
final voices asking for fbdev to be kept have been satisfied, see the
linked issue.
Fbdev-backend uses a kernel graphics UAPI (fbdev) which is sub-par for a
Wayland compositor: you cannot do GPU accelerated graphics in any
reasonable way, no hotplug support, multi-output support is tedious, and
so on. Most importantly, Linux has deprecated fbdev a long time ago due
to the UAPI fitting modern systems and use cases very poorly, but cannot
get rid of it if any users remain. Let's do here what we can to reduce
fbdev usage.
I am doing color management related additions to libweston which require
adding checks to every backend. One backend less is less churn to write
and review.
Libweston major version has already been bumped to 11, so the next
release will be Weston 11, without fbdev. enum weston_compositor_backend
entries change their numerical values.
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/581
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
These are supported by some other compositors already.
Add them to the list so `weston-simple-dmabuf-feedback`
reports them correctly.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
The built-in backend of libseat requires users to enable a logging
level in order for libseat to start writing out log messages. For that
to happen we split out the info and error log level messages into the
compositor's log scope, while debug level messages go into a dedicated
scope.
With that, this patch brings in a new scope, called libseat-debug, which
users need to explicity create a subscription for it as to retrieve/have
access to debug message coming out of libseat. Note that by default we
have a subscription for the log-scope so any errors/info from libseat
would be displayed to the user.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Otherwise, the client will assume that dragging is in progress and remains in
that state forever.
This can happen when weston processes the mouse up event just before the
start_drag() arrives.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
This doesn't work with any of the launchers we've kept. Remove the option
and all the bits that handle it.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Moving forward we're going to be supporting libseat and logind as our
only launchers. We're doing this to reduce our maintenance burden,
and security impact.
Libseat supports all our existing use cases, and seatd can replace
weston-launch so we no longer have to carry a setuid-root program.
This patch removes weston-launch, and launcher-direct, leaving only
libseat and logind.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Fix a typo. No CM functional change, just redirect LCMS error
into created cmsContext which output into weston log.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
This is probably the simplest case to demonstrate how to use
WESTON_EXPORT_FOR_TESTS.
Previously, vertex-clip test re-built vertex-clipping.c for itself. Now
it directly links in gl-renderer.so instead as that is where
vexter-clipping.c gets built into for actual use. This probably will not
work for any installed program, but luckily tests are never installed,
so Meson makes sure the DSO is found.
Unfortunately we cannot remove the definition of dep_vertex_clipping
yet, because clients/cliptest.c needs it.
This makes vertex-clip test depend on GL-renderer, but that is where the
code is really used.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Although weston_compositor_run_key_binding() is called when the current
keyboard grab is default_grab or input_method_grab, swallowing the key
event is processed only on default_grab. As a result key events that
should be swallowed are sent to the input method unexpectedly.
For example, when a user press `Super + s` on weston-editor to take a
screen shot, `s` will be unexpectedly entered to the text area.
I confirmed such behaviour with weston-simple-im and fcitx5-5.0.10.
It doesn't occur with weston-keyboard because it doesn't install
keyboard grab.
Signed-off-by: Takuro Ashie <ashie@clear-code.com>
Use 3D LUT for color mapping.
For category CMLCMS_CATEGORY_INPUT_TO_BLEND use transform which has
3 profiles: input, output and light linearizing transfer function.
For category CMLCMS_CATEGORY_INPUT_TO_OUTPUT use input and output profiles +VCGT.
For category CMLCMS_CATEGORY_BLEND_TO_OUTPUT use output inverse EOTF + VCGT.
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Graeme sketched a linearization method there:
https://lists.freedesktop.org/archives/wayland-devel/2019-March/040171.html
Sebastian prototyped there:
https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/14/commits
Thanks to Pekka for great simplifications in implementation, like the xyz_dot_prod()
Quote: "should help untangle lots of the multiplications and summations by saying
we are computing dot products, etc".
The approach was validated using matrix-shaper and cLUT type of profiles.
If profile is matrix-shaper type then an optimization is applied.
The extracted EOTF is inverted and concatenated with VCGT, if it is availible.
Introduce function cmlcms_reasonable_1D_points which would be shared between
linearization method and number of points in 1DLUT for the transform.
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Co-authored-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Add to search parameter cmlcms_category, input and output profiles,
and render intent for output which would be used for both profiles.
Add common function setup_search_param for every category.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
The stock profile would be used when client or output
do not provide any profile or unaware of color management.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
1. The cmlcms_category is used to identify the purpose of transform:
- CMLCMS_CATEGORY_INPUT_TO_BLEND
- CMLCMS_CATEGORY_BLEND_TO_OUTPUT
- CMLCMS_CATEGORY_INPUT_TO_OUTPUT
2. Added following fields to cmlcms_color_profile:
- output_eotf - If the profile does support being an output profile and it
is used as an output then this field represents a light linearizing
transfer function and it can not be null. The field is null only if
the profile is not usable as an output profile. The field is set when
cmlcms_color_profile is created.
- vcgt - VCGT tag cached from output profile, it could be null if not exist
- output_inv_eotf_vcgt - if the profile does support being an output profile and it
is used as an output then this field represents a concatenation of inverse
EOTF + VCGT, if the tag exists and it can not be null.
3. Added field cmsHTRANSFORM to cmlcms_color_transform.
It is used to store LCMS optimized pipeline.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
The following GL extensions provide support for shaders CM:
-GL_OES_texture_float_linear makes GL_RGB32F linear filterable.
-GL ES 3.0 provides Texture3D support in GL API.
-GL_OES_texture_3D provides sampler3D support in ESSL 1.00.
If abovesaid is supported then renderer sets flag WESTON_CAP_COLOR_OPS
which means that all fields in struct weston_color_transform are
supported, for example, 1DLUT and 3DLUT.
Use GL_OES_texture_3D to implement 3DLUT function which
uses trilinear interpolation for pixel processing or bypass as is.
Quote from https://nick-shaw.github.io/cinematiccolor/luts-and-transforms.html
"3D LUTs have long been embraced by color scientists and are one of
the tools commonly used for gamut mapping. In fact, 3D LUTs are used
within ICC profiles to model the complex device behaviors necessary
for accurate color image reproduction".
Quote from https://developer.nvidia.com/gpugems/gpugems2/part-iii-high-quality-rendering/
chapter-24-using-lookup-tables-accelerate-color
is about interpolation: "By generating intermediate results based
on a weighted average of the eight corners of the bounding cube,
this algorithm is typically sufficient for color processing,
and it is implemented in graphics hardware".
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Introduce shader color mapping identity and 3D LUT.
Shader requirements struct uses union for color mapping
to prepare the place for 3x3 matrix.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Introduce 3D LUT definition as part of Weston
color transform struct. A 3D LUT is a LUT containing
entries for each possible RGB triplets.
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
We can end in `subsurface_committed()` in different scenarios
without the surface having an attached buffer. While setting
the mapped state to `true` in that case doesn't matter for
that (sub)surface itself, it triggers its own child subsurfaces
to get mapped when they shouldn't.
Closes https://gitlab.freedesktop.org/wayland/weston/-/issues/426
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Many years ago (2014) systemd-logind was brought into libsystemd.
We've supported old versions of systemd-logind ever since.
Let's remove support for old versions of systemd-logind before the
merge for a tiny code simplification.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Zoom is a neat trick, but in its current form it's very hard to test
and maintain.
It also causes output damage to scale outside of the output's boundaries,
which leads to an extra clipping step that's only necessary when zoom
is enabled.
Remove it to simplify desktop-shell and compositor.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
The spec states:
> Because buffer transformation changes and damage requests may be
> interleaved in the protocol stream, it is impossible to determine
> the actual mapping between surface and buffer damage until
> wl_surface.commit time. Therefore, compositors wishing to take both
> kinds of damage into account will have to accumulate damage from the
> two requests separately and only transform from one to the other after
> receiving the wl_surface.commit.
For subsurfaces in sync mode, arguably the same is the case until the
cached state gets applied eventually. Thus, in order to keep complexity
to a sane level, just accumulate buffer damage and convert it only
when the cached state gets applied.
This mirrors how other compositors like Mutter implement cached damage
and what the spec arguably should demand.
Closes https://gitlab.freedesktop.org/wayland/weston/-/issues/446
Signed-off-by: Robert Mader <robert.mader@collabora.com>
These formats are useful because they are often easier to produce
on CPU than half-float formats, and abgr16161616 has both >= 10bpc
color channels and adequate alpha, unlike abgr2101010.
The 16-bpc textures created from buffers with these formats require
the GL_EXT_texture_norm16 extension.
As WL_SHM_FORMAT_ABGR16161616 was introduced in libwayland 1.20,
update Weston's build requirements and CI.
The formats also needed to be registered in the pixel format table,
and defined in a fallback path if recent libdrm is not available.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
Specifically log if there were no suitable planes for us to use, or if
we tried to place it on a plane but were told no by the kernel.
Signed-off-by: Daniel Stone <daniels@collabora.com>
There's no real reason for these to be separate now that the eligibility
checks have been moved up so we don't call them unless it makes sense.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We just copy the SHM buffer straight into a separately-allocated GBM BO,
so no need to take a reference on the buffer itself or keep it from
being released.
All drm_output_try_view_on_plane really does at this point is to call
the prepare_*_view function for the requisite plane type, and take a ref
on the weston_buffer from the client. Given that we don't need to keep
the client buffer alive, we can short-circuit
drm_output_try_view_on_plane, and instead just call
drm_output_prepare_cursor_view directly when we have a cursor plane.
This also makes it easier to just remove drm_output_try_view_on_plane in
following patches when we merge the overlay/scanout plane path into one.
Doing so gives us two clearly-separated paths: one for copying a SHM
client buffer into a cursor, and another for directly scanning out
client content.
Signed-off-by: Daniel Stone <daniels@collabora.com>
At some point this got hobbled, such that NO_PLANES and
NO_PLANES_ACCEPTED became the same thing, so we can just check if the
returned plane_state is NULL or not.
Signed-off-by: Daniel Stone <daniels@collabora.com>
For views which cover the entire output, we always attempt to place them
on the primary plane, to avoid a situation where we place a fullscreen
view into an overlay plane and then have to disable the primary plane,
which doesn't always work.
Move this check earlier, so we don't consider overlay planes to be
candidates for fullscreen views. This check should be changed in future
to only filter for opaque views, but that's for another time.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We shouldn't get down into trying to place a view on a cursor plane if
these checks are not met, so change them to asserts rather than early
returns.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When we introduced support for variable zpos, we did so by filtering the
list of acceptable planes and then creating a separate zpos-ordered
list. Now that the planes are already zpos-sorted in the backend list,
and we have more early filtering, we can replace this with a single
plane-list walk.
Signed-off-by: Daniel Stone <daniels@collabora.com>
For better or worse, cursor planes can only be used by uploaded SHM
buffers right now, so ignore them when we're calculating the acceptable
plane mask for client dmabufs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If we're in renderer-only mode, we can only use the renderer and the
cursor plane. Don't even try to import client buffers as it makes no
sense.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If we have a SHM buffer, it can only go into a cursor plane - and only
then if it's of the right format.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Each output is hardcoded to the use of a single 'special' (primary or
cursor) plane; make sure we don't try to steal them from other outputs
which might not be happy to discover that we've taken it off them.
Signed-off-by: Daniel Stone <daniels@collabora.com>
GBM is how we import all our client content into DRM FBs, so don't try
anything other than renderer-only without it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
It's possible to write this with a few less twisty special cases. Tested
manually with a randomly-distributed input tree as well as manually
trying to hit special cases around first/last entries.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This ensures that users that previously set the option explicitly will also have
a chance to notice the deprecation.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
weston-launch will be removed in a future release as this feature has
been offloaded to libseat and seatd-launch. Print an early deprecation
warning to give existing users time to migrate.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Transforming the scanout damage by the zoom will result in rectangles
outside of the display, and some with negative co-ordinates. This makes
at least some drivers unhappy (tested on vmware), and the page flip fails,
and weston hangs indefinitely.
Clip the damage to the output so we don't fall down.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Rename the build option to "deprecated-backend-fbdev" so that a
previously configured build dir doesn't retain the old setting.
This is consistent with the existing "deprecated-wl-shell" option.
Make the option default to "false".
Print a warning when fbdev is force-enabled.
Signed-off-by: Simon Ser <contact@emersion.fr>
References: https://gitlab.freedesktop.org/wayland/weston/-/issues/581
The invariant is clearly documented in code comments, but the code
failed to ensure it in all cases. Fix it.
There is one very specific protocol sequence triggered by a development
version of the Wine Wayland driver when Chrome (win64 app) is switched
from window to fullscreen and then back by pressing F11 key. The switch
back triggered
weston: ../libweston/color.c:217: weston_paint_node_ensure_color_transform: Assertion 'it->surf_xform_valid == false' failed
For some reason, that specific protocol sequence causes
weston_compositor_build_view_list() to create a transient second view
for a sub-surface. In the Chrome traces, I have seen that happen twice
per run. The first time it works, the old view gets immediately
destroyed. The second time (during un-fullscreening) a new transient
view is create and then it fails the invariant check.
The fix is in weston_paint_node_create() which is supposed to ensure the
invariant. However, it went through the (new) view's paint node list,
which will not contain paint nodes from other views. In hindsight this
is an obvious bug, but perhaps all views having exactly one associated
surface each somehow confused the author. Since the invariant is about
surface+output, go through the surface's paint node list instead. That
list contains all the relevant paint nodes by definition.
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/568
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Commit 0e4f097d broke opaque regions, and since then weston will waste
time rendering occluded areas.
I think this is because we're taking the intersection of the opaque
and scissor regions even when the scissor region isn't enabled.
An easy test is to turn on triangle fan debugging with the gl renderer,
then run weston-simple-damage and move another opaque application such as
weston-terminal over it.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Leak found running drm-smoke-test with ASan.
Do not forget to free the launcher before returning when we can't open
the launcher fd. Also, just set 'out = launcher' after all error paths,
otherwise we give the caller a stale pointer.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
weston_touch_destroy(), which is called from weston_seat_release(),
asserts that all its touch devices have been destroyed. The Wayland
backend currently destroys the touch devices ... immediately after
calling weston_seat_release().
Invert the ordering so that touch devices are destroyed first and we
don't trip over the assert.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When EGL initialization fails (failure to create a GLES3 or GLES2
context) we will end up calling gbm_device_destroy() twice, once
in init_egl() and once in the drm_backend_create() error path.
Given that we should also take care of properly destroying the gbm
device when we don't have any inputs for instance, mark the gbm device
as NULL to avoid calling gbm_device_destroy() once more when destroying
the DRM-backend.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Replaces potential corruption signal emit call sites with the more safer
weston_signal_emit_mutable().
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This uses the more safer version of signal emission to avoid a potential
crash when the output is destroyed that will follow a surface/view
destruction for which it has a listener attached (to the output_destroy
signal).
Fixes: #734
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This avoids crashes due to removal of notification listeners from within
invocations of other listener callbacks in the same signal emission.
Fixes: #415
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Walking the format/modifier list to try to find out if our FB is
compatible with the plane is surprisingly expensive. Since the plane's
capabilities are static over the lifetime of the KMS device, cache the
set of planes for which the FB is theoretically
format/modifier-compatible when it's created, and use that to do an
early cull of the set of acceptable planes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When we first create a drm_fb from a weston_buffer, cache it and keep it
alive as long as the buffer lives. This allows us to reuse the gbm_bo
and kernel-side DRM framebuffer, rather than constantly creating and
destroying them at every repaint. The overhead of doing so (e.g. MMU
updates) can be significant on some platforms.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Currently each drm_fb takes a reference on a client buffer it wraps.
This prevents us from being able to reuse a drm_fb in multiple places
(e.g. two views of the same client buffer) simultaneously, or even back
to back.
Move the buffer reference to the plane state, as preparation for
allowing drm_fb to be cached inside the weston_buffer.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Currently we take a reference on the underlying client buffer every time
we materialise a drm_fb from a view, and release it when the drm_fb is
destroyed. This means that we need to create and destroy a drm_fb every
time we want to use it, which is pathologically unperformant on some
platforms.
To start working towards being able to cache drm_fb, only take the
reference when we apply it to a plane state.
Signed-off-by: Daniel Stone <daniels@collabora.com>
No sense walking the plane list every frame if we can't use it because
it's neither a SHM buffer nor a client buffer we can directly import as
a framebuffer.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If we still have a pending idle timer when the compositor is being
destroyed, make sure to free it first.
Signed-off-by: Daniel Stone <daniels@collabora.com>
EGLNativeWindowType can be a lot of different things, including a
pointer which an XID is not. Explicitly cast it through uintptr_t so we
don't throw build warnings either way.
Signed-off-by: Daniel Stone <daniels@collabora.com>
In commit "libweston: add initial dma-buf feedback implementation" we've
added initial support to dma-buf feedback, but it was not using the
feedback from DRM-backend to add useful per-surface feedback.
In this patch we add this. The scanout tranche of the per-surface
feedback is based on the union of formats/modifiers of the primary and
overlay planes available. These are intersected with the
formats/modifiers supported by the renderer device.
Also, it's important to mention that the scene can change a lot and we
can't predict much. So this patch also adds hysteresis to the dma-buf
feedback. We wait a few seconds to be sure that we reached stability
before adding or removing the scanout tranche from dma-buf feedback and
resending them. This help us to avoid spamming clients and leading to
unnecessary buffer reallocations on their end.
Here's an example of what we want to avoid:
1. We detect that a view was not placed in a plane only because its
format is not supported by the plane, so we add the scanout tranche
to the feedback and send the events.
2. A few milliseconds after, the view gets occluded. So now the view
can't be placed in a plane anymore. We need to remove the scanout
tranche and resend the feedback with formats/modifiers optimal for
the renderer device. The client will then reallocate its buffers.
3. A few milliseconds after, the view that was causing the occlusion
gets minimized. So we got back to the first situation, in which the
format of the view is not compatible with the plane. Then we need to
add a scanout tranche and resend the feedback...
This patch is based on previous work of Scott Anderson (@ascent).
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Add enum try_view_on_plane_failure_reasons to help us to keep track of
the reason why promoting view to a plane failed. We also add a variable
to struct weston_paint_node so that we can update this information in
each output repaint.
This will be used in the next commits, in which we add proper surface
dma-buf feedback support.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This adds the initial dma-buf feedback implementation, following the
changes in the dma-buf protocol extension.
The initial dma-buf feedback implementation gives support to send
default feedback and per-surface feedback. For now the per-surface
feedback support is very basic and is still not implemented in the
DRM-backend, what basically means that KMS plane's formats/modifiers are
not being exposed to clients. In the next commits of this series we add
the DRM-backend implementation.
This patch is based on previous work of Scott Anderson (@ascent).
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This just documents why we can be sure that
renderer->get_supported_formats() is set in bind_linux_dmabuf().
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
It simply returns the number of format/modifier pairs in the array. This
will be useful for the next commits, in which we add support for dma-buf
feedback.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Add function to query the DRM device given an EGLDisplay. It is the
device being used by the compositor to perform composition.
This will be useful in the next commits of this series, where we add
support for dma-buf feedback.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Errors happening to devices being added or removed shouldn't fail
silently so exit if any of that happens.
Sprinkle some debug logs for other cases as well.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
Add API to set an output's color profile. This new function can also be
called while the output is enabled. This allows changing the output
color profile even at runtime if desired.
color-noop has no way of creating weston_color_profile objects, so it
just asserts that no color profile is set.
color-lcms does not yet implement taking the output color profile into
account, so for now it just fails everything if a profile is set.
weston_surface_color_transform_fini() was previously used only prior to
freeing the struct, but now it is used also to just clear the struct,
hence it needs to reset the fields.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Move the code into a new function that either succeeds in setting all
the color transformations or does not change anything. This will be
useful when implementing output color profiles changes while the output
is enabled.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This function will be useful for Weston to load output ICC profiles from
weston.ini.
Co-authored-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Roughly speaking, a color profile describes the color space of content
or an output. Under the hood, the description includes one or more ways
to map colors between the profile space and some standard profile
connecting space (PCS).
This object is not called a color space. A color space has a unique
definition, while a color profile may contain multiple different
mappings depending on render intent. Some of these mappings may be
subjective, with an artistic touch.
When a source color profile and a destination color profile are combined
under a specific render intent, they produce a color transformation.
Color transformations are already preresented by weston_color_transform.
This patch adds the basic API for color profile objects. Everything
worthwhile of these objects is implemented in the color managers:
color-noop never creates these, and in color-lcms they are basically a
container for cmsHPROFILE, the Little CMS object for color profiles.
Color profile objects will not be interpreted outside of the color
managers, unlike color transformations.
For a start, the color manager API has one function to create color
profiles: from ICC profile data. More creation functions for other
sources will be added later.
The API has errmsg return parameter for error messages. These are not
simply weston_log()'d, because CM&HDR protocol will allow clients to
trigger errors and the protocol handles that gracefully. Therefore
instead of flooding the compositor logs, the error messages will
probably need to be relayed back to clients.
Color-lcms is expected to create a cmsHPROFILE for all kinds of color
profiles, not just for those created from ICC profile data. Hence,
color-lcms will fingerprint color profiles by the MD5 hash which Little
CMS computes for us. The fingerprint is used for de-duplication: instead
of creating copies, reference existing color profiles.
This code is very much based on Sebastian Wick's earlier work on Weston
color management, but structured and named differently.
Co-authored-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
These formats will be eventually be useful for color managed clients
using wl_shm that wish to submit buffers encoding high dynamic range
images.
While the minimum requirement for linearly filterable half float
textures is GL ES 2.0 + GL_OES_texture_half_float_linear, to keep
the code simple, this commit only enables the new formats when
the requirements for color management (notably including GL ES 3.0
and GL_EXT_color_buffer_half_float) are available.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
This fixes the tear-down and the destroying part in case RDP back-end
couldn't be initialized. The first issue is the rdp_output which will
not be created in some circumstances (can't open the socket for
instance) and requires a guard check, and secondly, the
rdp_head being created above of that, wasn't removed and tripped an
assert when destroying the compositor instance.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Adding these formats makes it possible for clients using wl_shm to
submit buffers with 10 bits per pixel, and thus (if Weston is
configured with an xrgb2101010 frame buffer) display more precise
colors on some computer monitors.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
The struct wayland_input objects tracking the outer compositor's
wl_seats are now properly destroyed when the wayland backend is.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
The wl_display_roundtrip call was originally introduced to let the
display_add_seat function wait until a wl_seat.name event was received.
This change replaces the wl_display_roundtrip call with an
asynchronous, nonrecursive equivalent. Now a wl_display.sync callback
is used to delay the final steps of adding a seat until one protocol
roundtrip has occured/the name has been received.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
My reading of the GL spec is that a dmabuf becomes a sibling to the
EGLImage created from it, and that all updates to the dmabuf will be
propagated to the EGLImage.
A rebind is still required every time the dmabuf content changes,
but this should be satisfied by gl_renderer_attach(), which does
a rebind when the buffer is commit.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
So, turns out the GL implementation is allowed to destroy EGLImage
sources if this isn't set. Apparently none we've ever been tested on do
this, but it looks like we should be setting this anyway.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
If we're not in a session we can fall back to sd_uid_get_display() to
find the user's primary session.
This allows launching weston from an ssh session or as a systemd
user service if a viable session is available.
It also more closely follows how libseat finds the session. The libseat
launcher can already do these things, so this change makes these
features common to both launchers.
Based on a patch by Sjoerd Simons <sjoerd.simons@collabora.com>
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Reported in !179 adding weston_output_repaint_failed resets the output
Co-authored-by: Daniel Stone
Co-authored-by: Julius Krah
Signed-off-by: n3rdopolis <bluescreen_avenger@verizon.net>
If two or more clients were running and the one that was focused when
weston itself lost keyboard focus was killed, weston would crash.
This is because commit 85d55540cb changed the way we handle saved keyboard
focus when we lose focus, and did so in such a way that the saved keyboard
focus listener could be removed from the surface destroy signal list
during the emit of the surface destroy signal. This corrupted the list
and led to a NULL pointer dereference.
Fix this by using a boolean flag to determine whether we should obey the
saved keyboard focus. We can set this safely in cases where
removing the listener would cause a crash.
Fixes#138
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Adds a Pixman format field to the pixel format table, and
adjusts the shm format handling code in the Pixman renderer
to use this table.
Pixman formats have been registered only for specific 565, 8888,
and 2101010 layouts, as these have corresponding DRM format codes
and are commonly used.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
EGL_KHR_partial_update can be implemented independently of
EGL_EXT_buffer_age so we handle each case seperately.
Signed-off-by: Ben Davis <ben.davis@arm.com>
Signed-off-by: Dennis Tsiang <dennis.tsiang@arm.com>
weston_output_enable() initializes the list, but weston_output_release()
maybe be called even if the output was never enabled, triggering the
assert due to uninitialized (actually NULL) list head.
This can be triggered with a bad weston.ini, for example using an
invalid output transform value.
Check in weston_output_disable() instead, but because it too may be
called for non-enabled output, only if it was actually enabled.
Fixes: 1a4f87dec5
"libweston: introduce weston_paint_node"
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Since commit "drm-formats: save result of intersection in the first
array", every block of code where weston_drm_format_array_create() and
destroy() are being called could use init() and fini() instead.
Remove these two functions from the API to make it leaner. This patch
also modifies the code that depends on these functions to use init() and
fini().
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
In the current API, we have some set operations: join, intersect and
subtract. Both join and subtract receives two DRM format arrays and save
the result in the first one.
For the intersection we have a slightly different approach, what makes
the API weird. We don't save the result in the arguments, instead we
return a new array with the result.
Modify weston_drm_format_array_intersect() in order to make it similar
to the other two set operations.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
EGL's native display type is not particularly well defined; in
gl-renderer we get around this by always treating it as a void *, since
for all the platforms we care about it's a pointer - gbm_device,
wl_display, or Display *.
The surfaceless platform doesn't care what the native display is (since
it doesn't have one by definition), so just use NULL instead of what may
be either NULL or 0 depending on environmental factors.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The API expects uintptr_t (good!), but we're passing an unsigned long
here. Make the conversion explicit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
pointer/touch drag-n-drop operations could happen if there's no keyboard
hooked up or when it is unplugged.
Fixes: #235
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
And ultimately, fail to start when there are no input devices on the
system. Patchs adds consistency to touch/pointer initialization to
return -1 in case same thing happens.
Further more, when the device is not created we can't assume to retrieve
a valid one from a libinput_device so guard against it. This takes care of
hot-plugging situations when we couldn't create the (keyboard) device,
or when removing it.
Fixes: #117, #402, #485
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
Some graphics drivers (currently at least VMware and AMD) will give a 0
timestamp for the atomic mode flip completion event when turning off
the display. This causes us to trip an assertion in
weston_output_frame_finish() because the clock jumps backwards, which
isn't a condition the presentation feedback code should be dealing with.
This is a good assertion and we'd like to keep it. And there's some
expectation that this is buggy behaviour in the graphics drivers that will
be fixed at some point.
Pragmatically speaking though, there's nothing productive we can do with a
correct timestamp for the display shutdown. So let's just flag the
event sent for DPMS off as invalid so presentation feedback doesn't have
to worry about it, and the assert doesn't fire.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
weston_frame_callback is needed primarily to store the doubly-linked list link,
but it can be also retrieved by using the wl_resource_get_link() function.
This removes an extra heap allocation per every wl_callback object.
Signed-off-by: Vlad Zahorodnii <vlad.zahorodnii@kde.org>
Conditionally build support when libdrm is at least 2.4.107 to make use
of it. Plug it in when printing out the buffer information.
With this in, we add a hard dependecy for libweston to link against
libdrm.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Potential failures when creating the EGL image could cause an incorrect
number of num images (num_planes > num_images). With this change
egl_image_unref() requires an additional check to avoid any potential NULL
derefs when cleaning up. We do it straight in egl_image_unref() instead
of adding guards all over the necessary parts.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
As observed on some platforms, importing known DMA buffers can cause
failures, leading to an attempt of destroyng an EGL image not set. This patch
resets the num_images such that loop becomes inert when destroying the
DMA buffer, and avoids passing an egl image to it.
The initial import doesn't have this issue as it sets the num_images in
case it succeeds. This also corrects the assumption that the num_images
were 0 at that point which, if the initial import succeded, was actually set
to 1.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
