surface_accumulate_damage() will call surface_compute_bbox() with the
extents of the surface damage region, for transformed surfaces only. If
there is no damage, surface_compute_bbox() will round up the empty
rectangle to a 1x1 rectangle. Triangles are produced for this 1x1
rectangle intersected with the surface.
The problem showed up with the triangle fan debug, where some seemingly
garbage pixels showed up relative to rotated surfaces.
Fix this by explicitly checking, that the area, for which a bounding box
is being computed for, is not zero.
Note, that the bbox will also be empty if only one of width and height
is zero. We do not paint things with zero thickness.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Rob Clark <rob.clark@linaro.org>
The intersection of two rectangles is guaranteed to be convex. Therefore
we do not need a center vertex for the triangle fan, we can simply use
the whatever first vertex the intersection polygon has. This reduces the
number of triangles, while still painting the exact same area.
While at it, emit_vertex() nested function is factored into the
for-loop, since that is the only calling site left.
Comments are updated to reflect the changes, and some unrelated comment
fixes are in repaint_region().
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Rob Clark <rob.clark@linaro.org>
- make it respect output transforms by making sure the uniforms are
up-to-date
- properly restore the current shader program, in case it was
overridden
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
weston_surface_draw() is restructured so that it will always use the
RGBX shader for opaque regions, if the surface is assigned the RGBA
shader.
Previously for opaque regions, we simply assumed, that the texture alpha
would be 1.0. If it was not (which really is an application bug), the
region would be misrendered. The RGBX shader forces the texture alpha to
1.0.
Xwayland surfaces may have bad alpha data in the opaque client area. If
blending was enabled, the bad alpha would be used with the RGBA shader.
This patch fixes rendering opaque xwayland windows with full-surface
alpha applied.
Test case: xterm, with full-surface alpha one step below 1.0. Before,
black text was fully transparent, now it is correctly only slightly
transparent.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Remove weston_surface::opaque_rect completely.
Instead, set the opaque region in xwayland.
Before this patch, black text in xterm was transparent. Now it is not.
However, this patch fixes only a part of the alpha problem. If you apply
full-surface alpha with super+alt+wheel, the problem reappears. This
problem is still due to bad alpha channel contents on xwayland windows.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Two buttons are added to the right-click menu of the window frame for
moving a surface either up or down.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
The workspace manager interface purpose is to provide clients with
control and knowledge about the current workspace state. Initially only
one function and one event exists; moving a surface and state updated
event. A workspace is represented as an index in a 1 dimensional array.
A client keeps track of the state by being broadcasted events when the
state changes, currently limited to current workspace or number of
workspaces available.
A client can send an asynchronous request to the manager asking to move
a surface to workspace identified by an index. It is up to the shell to
actually move it.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
By default, Control + Shift + Up/Down will move the currently active
surface, if any, while changing to another workspace.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
To avoid having a surface on a hidden workspace in focus always set the
focus (even to NULL) when restoring.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
After explaining the problem on irc, Pekka dictated this solution which works.
The problem is that simple-egl can hang when toggling fullscreen because of a
race where (quoting Pekka) "if it dispatches the frame callback simple-egl
itself requested before the Mesa's own frame callback came, simple-egl will go
to its redraw routing and call eglSwapBuffers so you end up effectively calling
eglSwapBuffers from within eglSwapBuffers, and deadlock". This patch avoids
redrawing (which calls eglSwapBuffers) when there is a pending frame callback.
When starting simple-egl with -f for fullscreen and toggling to 'windowed' mode with F11,
the surface is opaque instead of semi-trnasparent as it is when starting without -f. We
only want to create the surface with alpha_size=0 when the user explicitly passes -o
because otherwise it will never have the ability to use alpha.
Draw the borders of all the triangles.
v1: original
v2: add keybinding to enable/disable fan debug (super-alt-space),
cycle colors to make it easier to see individual draws, and
redraw undamaged region to clean up previous frames debug
lines
Signed-off-by: Rob Clark <rob@ti.com>
We can use and render the opaque region only, if we are not applying a
full-surface alpha.
Test case: weston-terminal; use super+alt+mousewheel to adjust the
window transparency. Before it went black, now it blends correctly.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Remove the weston_surface::blend attribute, which really meant that the
texture produced valid alpha values. This was used to override the opaque
region for RGBX surfaces, which produce undefined values for alpha.
Instead, compile a new shader especially for RGBX surfaces, that
hardcodes the sampled alpha as 1.0.
Before "compositor: optimize/simplify shaders" there was a 'vec4 opaque'
in the shaders, that would cause part of the texture to be forced to
alpha=1.0. Now that is gone, and we need this replacement.
To test: launch simple-shm, and use the super+alt+mousewheel combination
to make it transparent. It should not show a light cross over the window.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Re-work how the shaders and emitted vertices work. Rather than always
rendering clip-rect sized quads and doing transformation in tex coords
(and requiring the corresponding clipping in frag shader), instead
emit transformed vertices, clipped wrt. dirty region, and use simpler
frag shaders. Also, split the rendering, so blended surfaces with an
opaque region have the opaque region drawn with blend disabled. The
result is considerably fewer pixels drawn with blend enabled, and much
fewer cycles in the frag shader.
This requires having some more complex logic to figure out the vertices
of the shape which forms the intersection of the clip rect and the
transformed surface. Which has perhaps got a few bugs or missing cases,
still (visual glitches in some cases) but at this point more or less is
starting to work. I think it is at least far enough along to get some
initial review.
The result, on small SoC GPU (omap4/pandaboard) on 1920x1080 display,
for simple stuff like moving windows around, I get 60fps (before 30fps
or less), and pushing YUV buffers for hw decoded 1080p video goes from
~6fps to 30fps, with no drop in framerate for transformed/rotated video
surface.
v1: original
v2: check that perpendicular intersect vertex falls within bounds of
transformed surface
v3: update w/ comments and fixes from Pekka Paalanen
v4: fix for full surface alpha from Pekka Paalanen, fix compositor-
wayland build
Signed-off-by: Rob Clark <rob@ti.com>
In cases where the GPU can natively handle certain YUV formats,
eglQueryWaylandBufferWL() can return the value EGL_TEXTURE_EXTERNAL_WL
and the compositor will treat the buffer as a single egl-image-external.
See:
http://www.khronos.org/registry/gles/extensions/OES/OES_EGL_image_external.txt
v1: original
v2: rename EGL_TEXTURE_EXTERNAL_OES -> EGL_TEXTURE_EXTERNAL_WL and query
for the extension
v3: fix build without updated mesa headers, if EGL_TEXTURE_EXTERNAL_WL
#define is missing from older mesa headers.
v4: resend without missing parts
Signed-off-by: Rob Clark <rob@ti.com>
The correspondence between cursor functions and names of cursors has
never been standardized. As a consequence, each cursor function can be
represented as a cursor with one of several names. Be more robust when
loading cursor by trying all known names that correspond to a cursor.
This should fix https://bugs.freedesktop.org/show_bug.cgi?id=50487
and https://bugs.freedesktop.org/show_bug.cgi?id=52609 a bit more
thoroughly.
This is a workaround for screenshots with transformed outputs. It reorders
the output positions so the correct buffer size is determined for the final
image. This assumes the outputs are in succession on the x axis. The outputs
are rendered in their transformed state.
This patch allows rotation and mirroring outputs for x11 and drm backends.
A new 'transform' key can be set in the [output] section. From the protocol:
"The flipped values correspond to an initial flip around a vertical axis
followed by rotation."
The transform key can be one of the following 8 strings:
normal
90
180
270
flipped
flipped-90
flipped-180
flipped-270
E.g. this can happen when you grab the lower right corner of a window
and move over the top of the window when resizing. In this case, the
changed width is still important and should be acted upon.
https://bugs.freedesktop.org/show_bug.cgi?id=53560
Instead of clearing the whole output region after a repaint, clear
only the regions that were actually painted. This way, the damage
added when a surface moves from the primary plane to another one is
kept while this region is obscured by the opaque region. This allows
the contents below an overlaid surface to be culled, but to make this
work properly, it is also necessary to change the way previous damage
is drawn.
Consider the following scenario: a surface is moved to an overlay plane
leaving some damage in the primary plane. On the following frame, the
surface on the overlay moves, revealing part of the damaged region on
the primary plane. On the frame after that, the overlaid surface moves
back to its previous position obscuring the region of the primary plane
repainted before. At this point, the repainted region was added to the
output's previous damage so that it is draw to both buffers. But since
this region is now obscured, the redrawing is skipped. If the overlaid
surface moves again revealing this region, one of the buffers actually
contains the wrong content.
To fix this problem, this patch ensures that any previous damage that
would be lost is actually preserved by folding it back into the
primary plane damage just before repainting.
We don't want to send enter/leave events to the compositor when the pointer
enters the surface, only when the pointer enters the content area. This
avoids hiding the cursor when entering the frame and sending out-of-bounds
coordinates to notify_pointer_focus().
