Peter Maydell 4b635cf7a9 hw/arm/armsse: Make SRAM bank size configurable ... For the IoTKit the SRAM bank size is always 32K (15 bits); for the SSE-200 this is a configurable parameter, which defaults to 32K but can be changed when it is built into a particular SoC. For instance the Musca-B1 board sets it to 128K (17 bits). Make the bank size a QOM property. We follow the SSE-200 hardware in naming the parameter SRAM_ADDR_WIDTH, which specifies the number of address bits of a single SRAM bank. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-11-peter.maydell@linaro.org		2019-02-01 14:55:42 +00:00
..
allwinner-a10.h	hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller	2019-01-07 15:23:47 +00:00
arm.h	hw/arm/armv7m: Remove unused armv7m_init() function	2018-06-15 15:23:34 +01:00
armsse.h	hw/arm/armsse: Make SRAM bank size configurable	2019-02-01 14:55:42 +00:00
armv7m.h	armv7m: Pass through start-powered-off CPU property	2019-02-01 14:55:41 +00:00
aspeed_soc.h	hw/arm/aspeed: simplify using the 'unimplemented device' for aspeed_soc.io	2018-02-15 18:29:36 +00:00
aspeed.h	hw/arm/aspeed: Add an Aspeed machine class	2018-09-25 15:13:24 +01:00
bcm2835_peripherals.h	hw: Do not include "exec/address-spaces.h" if it is not necessary	2018-06-01 14:15:10 +02:00
bcm2836.h	hw/arm/bcm2836: Create proper bcm2837 device	2018-03-19 18:23:24 +00:00
digic.h	qemu-common: push cpu.h inclusion out of qemu-common.h	2016-05-19 16:42:29 +02:00
exynos4210.h	hw/arm/exynos: Move DRAM initialization next boards	2017-06-13 14:56:57 +01:00
fdt.h	hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiation	2015-06-19 14:17:44 +01:00
fsl-imx6.h	fsl-imx6: Swap Ethernet interrupt defines	2018-03-19 18:23:24 +00:00
fsl-imx6ul.h	i.MX6UL: Add i.MX6UL SOC	2018-08-16 14:05:28 +01:00
fsl-imx7.h	i.MX: Add i.MX7 SOC implementation.	2018-03-09 17:09:43 +00:00
fsl-imx25.h	imx_fec: Reserve full FSL_IMX25_FEC_SIZE page for the register file	2018-01-11 13:25:38 +00:00
fsl-imx31.h	i.MX: Split the CCM class into an abstract base class and a concrete class	2015-12-17 13:37:15 +00:00
linux-boot-if.h	qom: make interface types abstract	2018-12-11 15:45:22 -02:00
msf2-soc.h	msf2: Add Smartfusion2 SoC	2017-09-21 16:36:56 +01:00
nrf51_soc.h	arm: Stub out NRF51 TWI magnetometer/accelerometer detection	2019-01-29 11:46:03 +00:00
nrf51.h	arm: Stub out NRF51 TWI magnetometer/accelerometer detection	2019-01-29 11:46:03 +00:00
omap.h	hw/arm/omap: Use qemu_log_mask(GUEST_ERROR) instead of fprintf	2018-06-26 17:50:40 +01:00
primecell.h	hw: move headers to include/	2013-04-08 18:13:10 +02:00
pxa.h	hw/pcmcia: Remove PCMCIACardState from "qemu/typedefs.h"	2019-01-22 05:14:32 +01:00
raspi_platform.h	bcm2835_peripherals: add rollup device for bcm2835 peripherals	2016-02-03 15:00:45 +00:00
sharpsl.h	Replace all occurances of __FUNCTION__ with __func__	2018-01-22 09:46:18 +01:00
smmu-common.h	hw/arm/smmu-common: Fix devfn computation in smmu_iommu_mr	2018-07-09 14:51:34 +01:00
smmuv3.h	hw/arm/smmuv3: Cache/invalidate config data	2018-06-26 17:50:42 +01:00
soc_dma.h	Clean up decorations and whitespace around header guards	2016-07-12 16:20:46 +02:00
stm32f205_soc.h	arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly	2017-09-19 09:09:32 -03:00
sysbus-fdt.h	arm/boot: split load_dtb() from arm_load_kernel()	2018-05-10 18:10:56 +01:00
virt.h	arm/virt: Add support for GICv2 virtualization extensions	2018-08-14 17:17:21 +01:00
xlnx-versal.h	hw/arm: versal: Correct the nr of IRQs to 192	2018-12-13 13:48:04 +00:00
xlnx-zynqmp.h	arm/xlnx-zynqmp: put APUs and RPUs in separate CPU clusters	2019-01-07 15:23:46 +00:00