Rename NB_PORTS as EHCI_PORTS to avoid definition clash
with UHCI equivalent:
hw/usb/hcd-ehci.h:40:9: error: 'NB_PORTS' macro redefined [-Werror,-Wmacro-redefined]
#define NB_PORTS 6 /* Max. Number of downstream ports */
^
hw/usb/hcd-uhci.h:38:9: note: previous definition is here
#define NB_PORTS 2
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Rename NB_PORTS as UHCI_PORTS to avoid definition clash
with EHCI equivalent:
hw/usb/hcd-uhci.h:38:9: error: 'NB_PORTS' macro redefined [-Werror,-Wmacro-redefined]
#define NB_PORTS 2
^
hw/usb/hcd-ehci.h:40:9: note: previous definition is here
#define NB_PORTS 6 /* Max. Number of downstream ports */
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We are going to modify these lines, fix their style
in order to avoid checkpatch.pl warning.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Allow boards to use the device creation functions even if USB itself
is not available; of course the functions will fail inexorably, but
this can be okay if the calls are conditional on the existence of
some USB host controller device. This is for example the case for
hw/mips/loongson3_virt.c.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
usb-storage is for the most part just a wrapper around an internally
created scsi-disk device. It uses DEFINE_BLOCK_PROPERTIES() to offer all
of the usual block device properties to the user, but then only forwards
a few select properties to the internal device while the rest is
silently ignored.
This changes scsi_bus_legacy_add_drive() to accept a whole BlockConf
instead of some individual values inside of it so that usb-storage can
now pass the whole configuration to the internal scsi-disk. This enables
the remaining block device properties, e.g. logical/physical_block_size
or discard_granularity.
Buglink: https://issues.redhat.com/browse/RHEL-22375
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240131130607.24117-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- We lost Juan and Leo in the maintainers file
- Steven's suspend state fix
- Steven's fix for coverity on migrate_mode
- Avihai's migration cleanup series
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZZY0TxIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wbSxgEAoM5g3wkc22lpAlRpU+hJUqT9NVOVQSK+
Fk7XJYTdSgABAKzykA6hAmU5Kj+yVI6jI874SVZbs2FWpFs4osvsKk4D
=sfuM
-----END PGP SIGNATURE-----
Merge tag 'migration-20240104-pull-request' of https://gitlab.com/peterx/qemu into staging
migration 1st pull for 9.0
- We lost Juan and Leo in the maintainers file
- Steven's suspend state fix
- Steven's fix for coverity on migrate_mode
- Avihai's migration cleanup series
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZZY0TxIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbSxgEAoM5g3wkc22lpAlRpU+hJUqT9NVOVQSK+
# Fk7XJYTdSgABAKzykA6hAmU5Kj+yVI6jI874SVZbs2FWpFs4osvsKk4D
# =sfuM
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 04 Jan 2024 04:30:07 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [unknown]
# gpg: aka "Peter Xu <peterx@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240104-pull-request' of https://gitlab.com/peterx/qemu: (26 commits)
migration: fix coverity migrate_mode finding
migration/multifd: Remove unnecessary usage of local Error
migration: Remove unnecessary usage of local Error
migration: Fix migration_channel_read_peek() error path
migration/multifd: Remove error_setg() in migration_ioc_process_incoming()
migration/multifd: Fix leaking of Error in TLS error flow
migration/multifd: Simplify multifd_channel_connect() if else statement
migration/multifd: Fix error message in multifd_recv_initial_packet()
migration: Remove errp parameter in migration_fd_process_incoming()
migration: Refactor migration_incoming_setup()
migration: Remove nulling of hostname in migrate_init()
migration: Remove migrate_max_downtime() declaration
tests/qtest: postcopy migration with suspend
tests/qtest: precopy migration with suspend
tests/qtest: option to suspend during migration
tests/qtest: migration events
migration: preserve suspended for bg_migration
migration: preserve suspended for snapshot
migration: preserve suspended runstate
migration: propagate suspended runstate
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a vm transitions from running to suspended, runstate notifiers are
not called, so the notifiers still think the vm is running. Hence, when
we call vm_start to restore the suspended state, we call vm_state_notify
with running=1. However, some notifiers check for RUN_STATE_RUNNING.
They must check the running boolean instead.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-4-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This variable is about the host OS, not the target. It is used a lot
more since the Meson conversion, but the original sin dates back to 2003.
Time to fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_DARWIN, CONFIG_LINUX and CONFIG_BSD are used in some rules, but
only CONFIG_LINUX has substantial use. Convert them all to if...endif.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This device is part of a superio/ISA bridge chip and IRQs from it are
routed to an ISA interrupt. Use via_isa_set_irq() function to implement
this in a vt82c686-uhci-pci specific irq handler.
This reverts commit 422a6e8075.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <ed5cdeaba7cf01eebdaa35f84c63427f4d8876b1.1701035944.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Recently MemReentrancyGuard was added to DeviceState to record that the
device is engaging in I/O. The network device backend needs to update it
when delivering a packet to a device.
In preparation for such a change, add MemReentrancyGuard * as a
parameter of qemu_new_nic().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Rename variables or remove nested definitions where it makes sense,
so that we can finally compile the USB code with "-Wshadow", too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231004130822.113343-1-thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Starting from audio_driver_init, propagate errors via Error ** so that
audio_init_audiodevs can simply pass &error_fatal, and AUD_register_card
can signal faiure.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
[Reworked the audio/audio.c parts, while keeping Martin's hw/ changes. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In xhci_get_port_bandwidth(), we use a variable-length array to
construct the buffer to send back to the guest. Avoid the VLA
by using dma_memory_set() to directly request the memory system
to fill the guest memory with a string of '80's.
The codebase has very few VLAs, and if we can get rid of them all we
can make the compiler error on new additions. This is a defensive
measure against security bugs where an on-stack dynamic allocation
isn't correctly size-checked (e.g. CVE-2021-3527).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230824164818.2652452-1-peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20230823065335.1919380-14-mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
GLib recommend to use G_SOURCE_REMOVE / G_SOURCE_CONTINUE
for GSourceFunc callbacks. Our FEWatchFunc is a GSourceFunc
returning such value. Use such definitions which are
"more memorable" [*].
[*] https://docs.gtk.org/glib/callback.SourceFunc.html#return-value
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230705133139.54419-5-philmd@linaro.org>
Apache license is considered by some to be not compatible
with GPLv2+. Since QEMU as combined work is GPLv2-only,
these two files should be made compatible.
Reported-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/qemu-devel/ZEpKXncC%2Fe6FKRe9@redhat.com/
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-By: canokeys.org (http://canokeys.org) <contact@canokeys.org>
Acked-by: YuanYang Meng <mkfssion@mkfssion.com>
Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is useful to extend the number of available PCIe devices to KVM guests
for passthrough scenarios and also to expose these models to a different
(big endian) architecture. Introduce a new config PCIE_DEVICES to select
models, Intel Ethernet adapters and one USB controller. These devices all
support MSI-X which is a requirement on s390x as legacy INTx are not
supported.
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20230712080146.839113-1-clg@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When the OHCI controller's framenumber is incremented, HccaPad1 register
should be set to zero (Ref OHCI Spec 4.4)
ReactOS uses hccaPad1 to determine if the OHCI hardware is running,
consequently it fails this check in current qemu master.
Signed-off-by: Ryan Wendland <wendland@live.com.au>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1048
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This machine hardcodes initialization of the USB device, so select the
corresponding Kconfig. It is not enough to have it as "default y if
XLNX_VERSAL" at usb/Kconfig because building --without-default-devices
disables the default selection resulting in:
$ ./qemu-system-aarch64 -M xlnx-zcu102
qemu-system-aarch64: missing object type 'usb_dwc3'
Aborted (core dumped)
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230208192654.8854-8-farosas@suse.de>
Message-Id: <20230503091244.1450613-8-alex.bennee@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This protects devices from bh->mmio reentrancy issues.
Thanks: Thomas Huth <thuth@redhat.com> for diagnosing OS X test failure.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230427211013.2994127-5-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The i.MX USB Phy driver does not check register ranges, resulting in out of
bounds accesses if an attempt is made to access non-existing PHY registers.
Add range check and conditionally report bad accesses to fix the problem.
While at it, also conditionally log attempted writes to non-existing or
read-only registers.
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Message-id: 20230316234926.208874-1-linux@roeck-us.net
Link: https://gitlab.com/qemu-project/qemu/-/issues/1408
Fixes: 0701a5efa0 ("hw/usb: Add basic i.MX USB Phy support")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is phase 2, following on from the basic platform support which was
already merged.
• Add a simple single-tenant internal XenStore implementation
• Indirect Xen gnttab/evtchn/foreignmem/xenstore through operations table
• Provide emulated back ends for Xen operations
• Header cleanups to allow PV back ends to build without Xen itself
• Enable PV back ends in emulated mode
• Documentation update
Tested-by: Paul Durrant <paul@xen.org>
... on real Xen (master branch, 4.18) with a Debian guest.
-----BEGIN PGP SIGNATURE-----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=JGLX
-----END PGP SIGNATURE-----
Merge tag 'xenfv-2' of git://git.infradead.org/users/dwmw2/qemu into staging
Enable PV backends with Xen/KVM emulation
This is phase 2, following on from the basic platform support which was
already merged.
• Add a simple single-tenant internal XenStore implementation
• Indirect Xen gnttab/evtchn/foreignmem/xenstore through operations table
• Provide emulated back ends for Xen operations
• Header cleanups to allow PV back ends to build without Xen itself
• Enable PV back ends in emulated mode
• Documentation update
Tested-by: Paul Durrant <paul@xen.org>
... on real Xen (master branch, 4.18) with a Debian guest.
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCgAwFiEEMUsIrNDeSBEzpfKGm+mA/QrAFUQFAmQHu3wSHGR3bXdAYW1h
# em9uLmNvLnVrAAoJEJvpgP0KwBVE5LYP/0VodDsQdP7Z4L+/IzgBSgEec7qmyQFB
# KlBZS/PmvCZKb0DHLI3GhXIyzD+/fnLtGSRl0rYObnKP7im+MpEDGmn97f6nIITk
# AzkdsVhNEBQFXCkLgQ9y8kTrTmsod9O4sqn0+naa2TX4FPcRN0MaNmpuLEubvaRS
# +JuyHmwy9ZeeAnsU31uJ0nx4F1hW9IDaatNoDeFcFnKCXQp36rtdZUViMowUJvwu
# Q+Xyg6dybusznaoiXd485tTPrTt+FK/wEARse3q2gRh9QblLu0r5BFb0rOfhYCTQ
# jw+5lBsOX+UlffmB9IDakRpVe4RKhvvRQSkRvYkPCshsqud9zMGhaquKg1vKBgca
# I31XSN0LCcon/ahHGtmVAxyZUpWdEnfzO1TbTNpz9oacROklgVgEYdw5Vwca71VD
# SURl6uCt9Jb9WmsR4twus4i4qDjQIDOtOF0hcxpl7HGktkxlGxUVI4qVLXARtVCS
# OTB6N0LlhJ2woj2wYK5BRTiOj03T2MkJEWaYhDdIrQREKWe2Sn4xTOH5kGbQQnOr
# km93odjBZFRHsAUnzXHXW3+yHjMefH7KrHePbmvsO4foGF77bBxosuC2ehFfvNJ0
# VM/H04NDtPYCBwdAr545PSN/q+WzEPQaquLZ0UuTBuPpMMOYd+Ff8YvQWJPyCM18
# 1mq9v6Xe9RQZ
# =JGLX
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 22:32:28 GMT
# gpg: using RSA key 314B08ACD0DE481133A5F2869BE980FD0AC01544
# gpg: issuer "dwmw@amazon.co.uk"
# gpg: Good signature from "David Woodhouse <dwmw@amazon.co.uk>" [unknown]
# gpg: aka "David Woodhouse <dwmw@amazon.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 314B 08AC D0DE 4811 33A5 F286 9BE9 80FD 0AC0 1544
* tag 'xenfv-2' of git://git.infradead.org/users/dwmw2/qemu: (27 commits)
docs: Update Xen-on-KVM documentation for PV disk support
MAINTAINERS: Add entry for Xen on KVM emulation
i386/xen: Initialize Xen backends from pc_basic_device_init() for emulation
hw/xen: Implement soft reset for emulated gnttab
hw/xen: Map guest XENSTORE_PFN grant in emulated Xenstore
hw/xen: Add emulated implementation of XenStore operations
hw/xen: Add emulated implementation of grant table operations
hw/xen: Hook up emulated implementation for event channel operations
hw/xen: Only advertise ring-page-order for xen-block if gnttab supports it
hw/xen: Avoid crash when backend watch fires too early
hw/xen: Build PV backend drivers for CONFIG_XEN_BUS
hw/xen: Rename xen_common.h to xen_native.h
hw/xen: Use XEN_PAGE_SIZE in PV backend drivers
hw/xen: Move xenstore_store_pv_console_info to xen_console.c
hw/xen: Add xenstore operations to allow redirection to internal emulation
hw/xen: Add foreignmem operations to allow redirection to internal emulation
hw/xen: Pass grant ref to gnttab unmap operation
hw/xen: Add gnttab operations to allow redirection to internal emulation
hw/xen: Add evtchn operations to allow redirection to internal emulation
hw/xen: Create initial XenStore nodes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If certain bit is set remote wake up should change state from
suspended to resume and generate interrupt. There was a todo comment
for this, implement that by moving existing resume logic to a function
and call that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <35c4d4ccf2f73e6a87cdbd28fb6a1b33de72ed74.1676916640.git.balaton@eik.bme.hu>
[PMD: Have ohci_resume() return a boolean]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
According to the PCI specification, PCI_INTERRUPT_LINE shall have no
effect on hardware operations. Now that the VIA south bridges implement
the internal PCI interrupt router let's be more conformant to the PCI
specification.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <9fb86a74d16db65e3aafbb154238d55e123053eb.1678188711.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Now that we have the redirectable Xen backend operations we can build the
PV backends even without the Xen libraries.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
XC_PAGE_SIZE comes from the actual Xen libraries, while XEN_PAGE_SIZE is
provided by QEMU itself in xen_backend_ops.h. For backends which may be
built for emulation mode, use the latter.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The previous commit introduced redirectable gnttab operations fairly
much like-for-like, with the exception of the extra arguments to the
->open() call which were always NULL/0 anyway.
This *changes* the arguments to the ->unmap() operation to include the
original ref# that was mapped. Under real Xen it isn't necessary; all we
need to do from QEMU is munmap(), then the kernel will release the grant,
and Xen does the tracking/refcounting for the guest.
When we have emulated grant tables though, we need to do all that for
ourselves. So let's have the back ends keep track of what they mapped
and pass it in to the ->unmap() method for us.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-8-philmd@linaro.org>
NEC_XHCI is a QOM object type. Declare its macros /
typedefs using OBJECT_DECLARE_SIMPLE_TYPE().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-7-philmd@linaro.org>
By using the QOM UHCI_GET_CLASS() cast macro we don't to
use the intermediate PCIDeviceClass variable.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-6-philmd@linaro.org>
The automatic conversion done during commit a489d1951c
("Use OBJECT_DECLARE_TYPE when possible") missed this
model because the typedefs are in a different file unit
(hcd-uhci.c) than where the DECLARE_INSTANCE_CHECKER()
is (hcd-uhci.h). Manually convert to OBJECT_DECLARE_TYPE().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-5-philmd@linaro.org>
To help debugging add trace points that print values read from or
written to the device's registers.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <1bb4985e5dfc1df5a290e77f76fd827ae3592ab7.1676916640.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The ohci_port_set_if_connected() function is only used by
ohci_port_set_status(), move next to it to have them at the same place.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <46411d4980ab0fba61ab0d2209a939fdc41eb573.1676916640.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Forward-define the type first, then use it for the ohci_die() handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-3-philmd@linaro.org>
Avoid when including "hw/usb/hcd-ohci.h":
hw/usb/hcd-ohci.h💯5: error: unknown type name 'SysBusDevice'
SysBusDevice parent_obj;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230203113650.78146-6-philmd@linaro.org>
hw/usb/u2f.h was added by commit 80e267f1d1 ("hw/usb: Add
U2F key base class"), almost the same time of the automatic
conversion done by commit c821774a3b ("Use OBJECT_DECLARE_TYPE
where posible"). Manually convert to OBJECT_DECLARE_TYPE().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-9-philmd@linaro.org>
To avoid forward-declaring CCIDBus, declare CCID_BUS QOM
definitions before its use in the USBCCIDState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-2-philmd@linaro.org>
This commit was created with scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-19-armbru@redhat.com>
../hw/usb/ccid-card-emulated.c: In function 'handle_apdu_thread':
../hw/usb/ccid-card-emulated.c:251:24: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
251 | assert((unsigned long)event > 1000);
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230103110814.3726795-2-marcandre.lureau@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Seems like there is nothing target-specific in here, so these files
can be moved to softmmu_ss to avoid that they get compiled twice
(once for qemu-system-arm and once for qemu-system-aarch64).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230112134928.1026006-8-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
