Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC.
This is not a complete implementation yet with a lot of components
still missing but enough for the U-Boot firmware to start and to boot
a Linux kernel or AROS.
Signed-off-by: François Revol <revol@free.fr>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Arm IoT Kit includes a "security controller" which is largely a
collection of registers for controlling the PPCs and other bits of
glue in the system. This commit provides the initial skeleton of the
device, implementing just the ID registers, and a couple of read-only
read-as-zero registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-16-peter.maydell@linaro.org
Add a model of the TrustZone peripheral protection controller (PPC),
which is used to gate transactions to non-TZ-aware peripherals so
that secure software can configure them to not be accessible to
non-secure software.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-15-peter.maydell@linaro.org
The MPS2 AN505 FPGA image includes a "FPGA control block"
which is a small set of registers handling LEDs, buttons
and some counters.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-14-peter.maydell@linaro.org
This adds the SiI9022 (and implicitly EDID I2C) device to the ARM
Versatile Express machine, and selects the two I2C devices necessary
in the arm-softmmu.mak configuration so everything will build
smoothly.
I am implementing proper handling of the graphics in the Linux
kernel and adding proper emulation of SiI9022 and EDID makes the
driver probe as nicely as before, retrieving the resolutions
supported by the "QEMU monitor" and overall just working nice.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Message-id: 20180227104903.21353-6-linus.walleij@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The core SJA1000 support is independent of following
patches which map SJA1000 chip to PCI boards.
The work is based on Jin Yang GSoC 2013 work funded
by Google and mentored in frame of RTEMS project GSoC
slot donated to QEMU.
Rewritten for QEMU-2.0+ versions and architecture cleanup
by Pavel Pisa (Czech Technical University in Prague).
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CanBusState state structure is created for each
emulated CAN channel. Individual clients/emulated
CAN interfaces or host interface connection registers
to the bus by CanBusClientState structure.
The CAN core is prepared to support connection to the
real host CAN bus network. The commit with such support
for Linux SocketCAN follows.
Implementation is as simple as possible. There is no state to be
migrated, and messages prioritization and queuing are not considered
for now. But it is intended to be extended when need arises.
Development repository and more documentation at
https://gitlab.fel.cvut.cz/canbus/qemu-canbus
The work is based on Jin Yang GSoC 2013 work funded
by Google and mentored in frame of RTEMS project GSoC
slot donated to QEMU.
Rewritten for QEMU-2.0+ versions and architecture cleanup
by Pavel Pisa (Czech Technical University in Prague).
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The MOS6522 VIA forms the bridge part of several Mac devices, including the
Mac via-cuda and via-pmu devices. Introduce a standard mos6522 device that
can be shared amongst multiple implementations.
This is effectively taking the 6522 parts out of cuda.c and turning them
into a separate device whilst also applying some style tidy-ups and including
a conversion to trace-events.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The i2c core and the at24c EEPROM should only be compiled and linked
on the machines that support i2c. Otherwise it's quite strange to see
the at24c-eeprom to be "available" on qemu-system-s390x for example.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1516634853-15883-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we have the prerequisites in target/hppa/,
implement the hardware for a PA7100LC.
This also enables build for hppa-softmmu.
Signed-off-by: Helge Deller <deller@gmx.de>
[rth: Since it is all new code, squashed all branch development
withing hw/hppa/ to a single patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tpm_crb is a device for TPM 2.0 Command Response Buffer (CRB)
Interface as defined in TCG PC Client Platform TPM Profile (PTP)
Specification Family “2.0” Level 00 Revision 01.03 v22.
The PTP allows device implementation to switch between TIS and CRB
model at run time, but given that CRB is a simpler device to
implement, I chose to implement it as a different device.
The device doesn't implement other locality than 0 for now (my laptop
TPM doesn't either, so I assume this isn't so bad)
Tested with some success with Linux upstream and Windows 10, seabios &
modified ovmf. The device is recognized and correctly transmit
command/response with passthrough & emu. However, we are missing PPI
ACPI part atm.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Add the PMU IO Module Interrupt controller device.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
In preperation for having an ARM and MicroBlaze ZynqMP machine let's
split out the current ARM specific config options.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This is the final stage in correcting the naming convention with respect to
sabre, APB and PBM. It is effectively a file rename from apb.c to sabre.c
along with touching up a few constants to remove the remaining references
to APB.
Note that as part of the rename process the configuration variable
CONFIG_PCI_APB is changed to CONFIG_PCI_SABRE.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Move the QOM type and macros into a new include/hw/pci-bridge/simba.h
file, and add a new CONFIG_SIMBA Makefile.objs variable which is enabled
for sparc64-softmmu builds only.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Order the CONFIG switches in ppc-softmmu.mak according to the machine
classes where they are used (embedded, Mac or PReP), so that it is
easier for the users to disable a set of switches completely if they
are not needed.
Also add the missing CONFIG_IDE_SII3112 switch to the embedded section
which was previously only added to ppcemb-softmmu.mak.
And while we're at it, also remove the CONFIG_IDE_CMD646 switch since
this controller does not seem to be used by any ppc machine in QEMU.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qemu-softmmu-ppc64 is supposed to be a superset of qemu-softmmu-ppc.
However, instead of simply including the 32-bit config file, we've
duplicated all CONFIG_xxx settings there instead. This way, we've missed
some CONFIG switches in ppc64-softmmu.mak which were only added to the
32-bit config file (e.g. CONFIG_SUNGEM). Let's fix this problem by
including the 32-bit config file into the 64-bit config file instead
of duplicating all the CONFIG switches there.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This commit introduces a new vhost-user device for block, it uses a
chardev to connect with the backend, same with Qemu virito-blk device,
Guest OS still uses the virtio-blk frontend driver.
To use it, start QEMU with command line like this:
qemu-system-x86_64 \
-chardev socket,id=char0,path=/path/vhost.socket \
-device vhost-user-blk-pci,chardev=char0,num-queues=2, \
bootindex=2... \
Users can use different parameters for `num-queues` and `bootindex`.
Different with exist Qemu virtio-blk host device, it makes more easy
for users to implement their own I/O processing logic, such as all
user space I/O stack against hardware block device. It uses the new
vhost messages(VHOST_USER_GET_CONFIG) to get block virtio config
information from backend process.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add target aarch64_be-linux-user. This allows a qemu-aarch64_be binary
to be built that will run big-endian aarch64 binaries.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-5-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a common generic PCI SATA controller that is also used in PCs
but more importantly guests running on the Sam460ex board prefer this
card and have a driver for it (unlike for other SATA controllers
already emulated).
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add support for the Zynq Ultrascale MPSoc Generic QSPI.
Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20171126231634.9531-13-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vmcoreinfo is built for all targets. However, it requires fw_cfg with
DMA operations support (write operation). Restrict vmcoreinfo exposure
to architectures that are supporting FW_CFG_DMA, that is arm-virt and
x86 only atm.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add OpenRISC Multicore PIC which handles inter processor interrupts
(IPI) between cores. In OpenRISC all device interrupts are routed to
each core enabling this device to be simple.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
It is used by all PPC targets; we can give the directory its own
Makefile.objs file, and include it directly from target/ppc.
target/s390 can do the same when it starts using it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The device can not be instantiated on many non-x86 and just prints
some error messages, e.g.:
$ qemu-system-ppc64 -device vmxnet3 -M g3beige
[vmxnet3][WR][vmxnet3_init_msix]: Failed to initialize MSI-X, error -95
[vmxnet3][WR][vmxnet3_pci_realize]: Failed to initialize MSI-X, configuration is inconsistent.
Since vmxnet3 is a para-virtualized device that is only useful on x86,
it should also only be enabled on the x86 targets.
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Smartfusion2 SoC has hardened Microcontroller subsystem
and flash based FPGA fabric. This patch adds support for
Microcontroller subsystem in the SoC.
Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170920201737.25723-5-f4bug@amsat.org
[PMD: drop cpu_model to directly use cpu type, check m3clk non null]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable it by default for the sparc64-softmmu configuration.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Using $(and ...) is dangerous here: It only works as long as the first
argument is set to 'y' or completely unset. It does not work if the
first argument is set to 'n' for example. Let's use the "land" make
function instead which has been written explicitely for this purpose.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1505759538-15365-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds a simplistic emulation of the Sun GEM ethernet controller
found in Apple ASICs.
Currently we only support the Apple UniNorth 1.x variant, but the
other Apple or Sun variants should mostly be a matter of adding
PCI IDs options.
We have a very primitive emulation of a single Broadcom 5201 PHY
which is supported by the MacOS driver.
This model brings out-of-the-box networking to MacOS 9, and all
versions of OS X I tried with the mac99 platform.
Further improvements from Mark:
- Remove sungem.h file, moving constants into sungem.c as required
- Switch to using tracepoints for debugging
- Split register blocks into separate memory regions
- Use arrays in SunGEMState to hold register values
- Add state-saving support
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
VIRTIO_PCI should properly depend on CONFIG_PCI.
With this change, we can switch off pci for s390x by removing
'CONFIG_PCI=y' from the default config.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Learn to compile out vhost-user (net, scsi & upcoming users). Keep it
enabled by default on non-win32, that is assumed to be POSIX. Fail if
trying to enable it on win32.
When trying to make a vhost-user netdev, it gives the following error:
-netdev vhost-user,id=foo,chardev=chr-test: Parameter 'type' expects a netdev backend type
And similar error with the HMP/QMP monitors.
While at it, rename CONFIG_VHOST_NET_TEST CONFIG_VHOST_USER_NET_TEST
since it's a vhost-user specific variable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rather than relying on everywhere that cares about whether the host
supports ivshmem using CONFIG_EVENTFD, make configure set an explicit
CONFIG_IVSHMEM.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-3-git-send-email-peter.maydell@linaro.org
[PMM: split out from another patch, add commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current CONFIG_IVSHMEM is confusing, because it looks like it's a
flag for "do we have ivshmem support?", but actually it's a flag for
"is the ivshmem PCI device being compiled?" (and implicitly "do we
have ivshmem support?" is tested with CONFIG_EVENTFD).
Rename it to CONFIG_IVSHMEM_DEVICE to clear this confusion up;
shortly we will add a new CONFIG_IVSHMEM which really does indicate
whether the host can support ivshmem.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1500021225-4118-2-git-send-email-peter.maydell@linaro.org
Implement a model of the Serial Communication Controller (SCC) found
in MPS2 FPGA images.
The primary purpose of this device is to communicate with the
Motherboard Configuration Controller (MCC) which is located on
the MPS board itself, outside the FPGA image. This is used
for programming the MPS clock generators. The SCC also has
some basic ID registers and an output for the board LEDs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
Implement a model of the simple timer device found in the CMSDK.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1500029487-14822-5-git-send-email-peter.maydell@linaro.org
Implement a model of the simple "APB UART" provided in
the Cortex-M System Design Kit (CMSDK).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500029487-14822-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Model the ARM MPS2/MPS2+ FPGA based development board.
The MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger
FPGA but is otherwise the same as the 2). Since the CPU itself
and most of the devices are in the FPGA, the details of the board
as seen by the guest depend significantly on the FPGA image.
We model the following FPGA images:
"mps2_an385" -- Cortex-M3 as documented in ARM Application Note AN385
"mps2_an511" -- Cortex-M3 'DesignStart' as documented in AN511
They are fairly similar but differ in the details for some
peripherals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500029487-14822-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
This commit introduces a vhost-user device for SCSI. This is based
on the existing vhost-scsi implementation, but done over vhost-user
instead. It also uses a chardev to connect to the backend. Unlike
vhost-scsi (today), VMs using vhost-user-scsi can be live migrated.
To use it, start Qemu with a command line equivalent to:
qemu-system-x86_64 \
-chardev socket,id=vus0,path=/tmp/vus.sock \
-device vhost-user-scsi-pci,chardev=vus0,bus=pci.0,addr=...
A separate commit presents a sample application linked with libiscsi to
provide a backend for vhost-user-scsi.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <1488479153-21203-4-git-send-email-felipe@nutanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Largely inspired by the TMP105 temperature sensor, here is a model for
the TMP42{1,2,3} temperature sensors.
Specs can be found here :
http://www.ti.com/lit/gpn/tmp421
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1496739230-32109-2-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
We use the IOMMU_TYPE1 of VFIO to realize the subchannels
passthrough, implement a vfio based subchannels passthrough
driver called "vfio-ccw".
Support qemu parameters in the style of:
"-device vfio-ccw,sysfsdev=$mdev_file_path,devno=xx.x.xxxx'
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-8-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Mark 3270 as non-migratable for the experimental stage. Enable
the 3270 device so that we can use x3270 client to operate the guest.
Run qemu with the arguments:
-chardev socket,id=char3270_0,host=0.0.0.0,port=23,nowait,server,tn3270 \
-device x-terminal3270,chardev=char3270_0,devno=fe.0.000a,id=terminal3270_0 \
There are some restrictions for the first stage: We don't support SSL
connections, multiple client connections and client resizing. Only
tested with the x3270 client.
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Signed-off-by: Yang Chen <bjcyang@linux.vnet.ibm.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Here's a respind of my first pull request for qemu-2.10, consisting of
assorted patches which have accumulated while qemu-2.9 stabilized.
Highlights are:
* Rework / cleanup of the XICS interrupt controller
* Substantial improvement to the 'powernv' machine type
- Includes an MMIO XICS version
* POWER9 support improvements
- POWER9 guests with KVM
- Partial support for POWER9 guests with TCG
* IOMMU and VFIO improvements
* Assorted minor changes
There are several IPMI patches here that aren't usually in my area of
maintenance, but there isn't a regular maintainer and these patches
are for the benefit of the powernv machine type.
This pull request supersedes my 2017-04-26 pull request. This new set
fixes a bug in one of the aforementioned IPMI patches which caused
clang sanitizer failures (and may have crashed on some libc / host
versions).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Nnid
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170426' into staging
ppc patch queue 2017-04-26
Here's a respind of my first pull request for qemu-2.10, consisting of
assorted patches which have accumulated while qemu-2.9 stabilized.
Highlights are:
* Rework / cleanup of the XICS interrupt controller
* Substantial improvement to the 'powernv' machine type
- Includes an MMIO XICS version
* POWER9 support improvements
- POWER9 guests with KVM
- Partial support for POWER9 guests with TCG
* IOMMU and VFIO improvements
* Assorted minor changes
There are several IPMI patches here that aren't usually in my area of
maintenance, but there isn't a regular maintainer and these patches
are for the benefit of the powernv machine type.
This pull request supersedes my 2017-04-26 pull request. This new set
fixes a bug in one of the aforementioned IPMI patches which caused
clang sanitizer failures (and may have crashed on some libc / host
versions).
# gpg: Signature made Wed 26 Apr 2017 07:58:10 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-20170426: (48 commits)
MAINTAINERS: Remove myself from e500
target/ppc: Style fixes
e500,book3s: mfspr 259: Register mapped/aliased SPRG3 user read
target/ppc: Flush TLB on write to PIDR
spapr-cpu-core: Release ICPState object during CPU unrealization
ppc/pnv: generate an OEM SEL event on shutdown
ppc/pnv: add initial IPMI sensors for the BMC simulator
ppc/pnv: populate device tree for IPMI BT devices
ppc/pnv: populate device tree for serial devices
ppc/pnv: populate device tree for RTC devices
ppc/pnv: scan ISA bus to populate device tree
ppc/pnv: enable only one LPC bus
ppc/pnv: Add support for POWER8+ LPC Controller
spapr: remove the 'nr_servers' field from the machine
target/ppc: Fix size of struct PPCElfPrstatus
ipmi: introduce an ipmi_bmc_gen_event() API
ipmi: introduce an ipmi_bmc_sdr_find() API
ipmi: provide support for FRUs
ipmi: use a file to load SDRs
ppc: add IPMI support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OfeB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20170421-v2-tag' into staging
Xen 2017/04/21 + fix
# gpg: Signature made Tue 25 Apr 2017 19:10:37 BST
# gpg: using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# gpg: aka "Stefano Stabellini <sstabellini@kernel.org>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* remotes/sstabellini/tags/xen-20170421-v2-tag: (21 commits)
move xen-mapcache.c to hw/i386/xen/
move xen-hvm.c to hw/i386/xen/
move xen-common.c to hw/xen/
add xen-9p-backend to MAINTAINERS under Xen
xen/9pfs: build and register Xen 9pfs backend
xen/9pfs: send responses back to the frontend
xen/9pfs: implement in/out_iov_from_pdu and vmarshal/vunmarshal
xen/9pfs: receive requests from the frontend
xen/9pfs: connect to the frontend
xen/9pfs: introduce Xen 9pfs backend
9p: introduce a type for the 9p header
xen: import ring.h from xen
configure: use pkg-config for obtaining xen version
xen: additionally restrict xenforeignmemory operations
xen: use libxendevice model to restrict operations
xen: use 5 digit xen versions
xen: use libxendevicemodel when available
configure: detect presence of libxendevicemodel
xen: create wrappers for all other uses of xc_hvm_XXX() functions
xen: rename xen_modified_memory() to xen_hvm_modified_memory()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
OpenPOWER systems use a BT device to communicate with the BMC.
Provide support for it.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Version: GnuPG v1
iQEcBAABAgAGBQJY/zFbAAoJEO8Ells5jWIR7LgH/A6lWkODVSKihnibRH82J9oe
rTsDdLgAGAMAur++tmNorPadZyMe/2+Cu0VsiIv591ldILruN6+jJydBzFtWFYE5
JQKa2VSTDu6bHPhr/UpRnWLhGzaJogklJR6YLkonDJznb1UnnTwEZ8c8+XD4gWLo
byo/dYF1yMnpVxSak/FkmCmwxc2K7s7P+r4FWO2CgAgY28F+/qERWJMbl1iUevQP
E1PC/XXEvhMdxi+6oYmWACdbW9/KwC5KKVELsQWYU1DcpQ7rWXCtA/mtKxvX+ePw
7CUK9ldeFXHE8uWVDnh3cWUL65Q8OtZarjMbrnN7xzcQDhMysStvVNS4QckN6/I=
=PEvc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 25 Apr 2017 12:22:03 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
COLO-compare: Optimize tcp compare trace event
COLO-compare: Optimize tcp compare for option field
slirp: add a fake NC-SI backend
aspeed: add a FTGMAC100 nic
net/ftgmac100: add a 'aspeed' property
net: add FTGMAC100 support
hw/net: add MII definitions
colo-compare: Fix old packet check bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is not used by default on any emulated machine yet but it is
still useful to have it compiled so it can be added from the command
line for clients that can use it (e.g. MorphOS has no driver for any
other emulated video cards but can output via SM501)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: bf305f36dcde152668cf12438ef983cd09ed2d3f.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The FTGMAC100 device is an Ethernet controller with DMA function that
can be found on Aspeed SoCs (which include NCSI).
It is fully compliant with IEEE 802.3 specification for 10/100 Mbps
Ethernet and IEEE 802.3z specification for 1000 Mbps Ethernet and
includes Reduced Media Independent Interface (RMII) and Reduced
Gigabit Media Independent Interface (RGMII) interfaces. It adopts an
AHB bus interface and integrates a link list DMA engine with direct
M-Bus accesses for transmitting and receiving packets. It has
independent TX/RX fifos, supports half and full duplex (1000 Mbps mode
only supports full duplex), flow control for full duplex and
backpressure for half duplex.
The FTGMAC100 also implements IP, TCP, UDP checksum offloads and
supports IEEE 802.1Q VLAN tag insertion and removal. It offers
high-priority transmit queue for QoS and CoS applications
This model is backed with a RealTek 8211E PHY which is the chip found
on the AST2500 EVB. It is complete enough to satisfy two different
Linux drivers and a U-Boot driver. Not supported features are :
- IEEE 802.1Q VLAN
- High Priority Transmit Queue
- Wake-On-LAN functions
The code is based on the Coldfire Fast Ethernet Controller model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This implements the VM Generation ID feature by passing a 128-bit
GUID to the guest via a fw_cfg blob.
Any time the GUID changes, an ACPI notify event is sent to the guest
The user interface is a simple device with one parameter:
- guid (string, must be "auto" or in UUID format
xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx)
Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The NVIC is a core v7M device that exists for all v7M CPUs;
put it under a CONFIG_ARM_V7M rather than hiding it under
CONFIG_STELLARIS.
(We'll use CONFIG_ARM_V7M for the SysTick device too
when we split it out of the NVIC.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-9-git-send-email-peter.maydell@linaro.org
Introduce support for emulating the MIPS Boston development board. The
Boston board is built around an FPGA & 3 PCIe controllers, one of which
is connected to an Intel EG20T Platform Controller Hub. It is used
during the development & debug of new CPUs and the software intended to
run on them, and is essentially the successor to the older MIPS Malta
board.
This patch does not implement the EG20T, instead connecting an already
supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough
for typical stock Boston software (eg. Linux kernels) to work with hard
disks given that both the ICH-9 & EG20T implement the AHCI
specification.
Boston boards typically boot kernels in the FIT image format, and this
patch will treat kernels provided to QEMU as such. When loading a kernel
directly, the board code will generate minimal firmware much as the
Malta board code does. This firmware will set up the CM, CPC & GIC
register base addresses then set argument registers & jump to the kernel
entry point. Alternatively, bootloader code may be loaded using the bios
argument in which case no firmware will be generated & execution will
proceed from the start of the boot code at the default MIPS boot
exception vector (offset 0x1fc00000 into (c)kseg1).
Currently real Boston boards are always used with FPGA bitfiles that
include a Global Interrupt Controller (GIC), so the interrupt
configuration is only defined for such cases. Therefore the board will
only allow use of CPUs which implement the CPS components, including the
GIC, and will otherwise exit with a message.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
isolated boston machine support for mips64el.
updated for recent Chardev changes.
ignore missing bios/kernel for qtest.
added default -drive to if=ide explicitly.
changed default memory size into 1G due to make check failure
on 32-bit hosts]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
This reverts commit d3473e147a.
This commit creates a board which defaults to having 2GB of RAM.
Unfortunately on 32-bit hosts we can't create boards with 2GB of RAM,
and so 'make check' fails. I missed this during testing of the
merge, unfortunately. Luckily the offending commit is the last
one in the merge request, so we can just revert it for now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce support for emulating the MIPS Boston development board. The
Boston board is built around an FPGA & 3 PCIe controllers, one of which
is connected to an Intel EG20T Platform Controller Hub. It is used
during the development & debug of new CPUs and the software intended to
run on them, and is essentially the successor to the older MIPS Malta
board.
This patch does not implement the EG20T, instead connecting an already
supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough
for typical stock Boston software (eg. Linux kernels) to work with hard
disks given that both the ICH-9 & EG20T implement the AHCI
specification.
Boston boards typically boot kernels in the FIT image format, and this
patch will treat kernels provided to QEMU as such. When loading a kernel
directly, the board code will generate minimal firmware much as the
Malta board code does. This firmware will set up the CM, CPC & GIC
register base addresses then set argument registers & jump to the kernel
entry point. Alternatively, bootloader code may be loaded using the bios
argument in which case no firmware will be generated & execution will
proceed from the start of the boot code at the default MIPS boot
exception vector (offset 0x1fc00000 into (c)kseg1).
Currently real Boston boards are always used with FPGA bitfiles that
include a Global Interrupt Controller (GIC), so the interrupt
configuration is only defined for such cases. Therefore the board will
only allow use of CPUs which implement the CPS components, including the
GIC, and will otherwise exit with a message.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
isolated boston machine support for mips64el.
updated for recent Chardev changes.
ignore missing bios/kernel for qtest.
added default -drive to if=ide explicitly]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Both devices seem to be specific to the ARM platform. It's confusing
for the users if they show up on other target architectures, too
(e.g. when the user runs QEMU with "-device ?" to get a list of
supported devices). Thus let's introduce proper configuration switches
so that the devices are only compiled and included when they are
really required.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently, the code to handle the legacy ISA bus is always included in
qemu. However there are lots of platforms that don't include ISA legacy
devies, and quite a few that have never used ISA legacy devices at all.
This patch allows the ISA bus code to be disabled in the configuration for
platforms where it doesn't make sense.
For now, the default configs are adjusted to include ISA on all platforms
including PCI: anything with PCI can at least in principle add an i82378
PCI->ISA bridge. Also, CONFIG_IDE_CORE which is already in pci.mak
requires ISA support.
We also explicitly enable ISA on some other non-PCI platforms which include
ISA devices: moxie, sparc and unicore32. We may want to pare this down in
future.
The platforms that will lose ISA by default are: cris, lm32, microblazeel,
microblaze, openrisc, s390x, tricore, xtensaeb, xtensa. As far as I can
tell none of these ever used ISA.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
At present, the core device model code for 8250-like serial ports
(serial.c) and the code for serial ports attached to ISA-style legacy IO
(serial-isa.c) are both controlled by the CONFIG_SERIAL variable.
There are lots and lots of embedded platforms that have 8250-like serial
ports but have never had anything resembling ISA legacy IO. Therefore,
split serial-isa into its own CONFIG_SERIAL_ISA option so it can be
disabled for platforms where it's not appropriate.
For now, I enabled CONFIG_SERIAL_ISA in every default-config where
CONFIG_SERIAL is enabled, excepting microblaze, or32, and xtensa. As best
as I can tell, those platforms never used legacy ISA, and also don't
include PCI support (which would allow connection of a PCI->ISA bridge
and/or a southbridge including legacy ISA serial ports).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
This obsoletes ppc-for-2.9-20170112, which had a MacOS build bug.
This is a long overdue ppc pull request for qemu-2.9. It's been a
long time coming due to some holidays and inconveniently timed
problems with testing. So, there's a lot in here:
* More POWER9 instruction implementations for TCG
* The simpler parts of my CPU compatibility mode cleanup
* This changes behaviour to prefer compatibility modes over
"raW" mode for new machine type versions
* New "40p" machine type which is essentially a modernized and
cleaned up "prep". The intention is that it will replace "prep"
once it has some more testing and polish.
* Add pseries-2.9 machine type
* Implement H_SIGNAL_SYS_RESET hypercall
* Consolidate the two alternate CPU init paths in pseries by
making it always go through CPU core objects to initialize CPU
* A number of bugfixes and cleanups
* Stop the guest timebase when the guest is stopped under KVM.
This makes the guest system clock also stop when paused, which
matches the x86 behaviour.
* Some preliminary cleanups leading towards implementation of the
POWER9 MMU.
There are also some changes not strictly related to ppc code, but for
its benefit:
* Limit the pxi-expander-bridge (PXB) device to x86 guests only
(it's essentially a hack to work around historical x86
limitations)
* Some additions to the 128-bit math in host_utils, necessary for
some of the new instructions.
* Revise a number of qtests and enable them for ppc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=vLVl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170202' into staging
ppc patch queue 2017-02-02
This obsoletes ppc-for-2.9-20170112, which had a MacOS build bug.
This is a long overdue ppc pull request for qemu-2.9. It's been a
long time coming due to some holidays and inconveniently timed
problems with testing. So, there's a lot in here:
* More POWER9 instruction implementations for TCG
* The simpler parts of my CPU compatibility mode cleanup
* This changes behaviour to prefer compatibility modes over
"raW" mode for new machine type versions
* New "40p" machine type which is essentially a modernized and
cleaned up "prep". The intention is that it will replace "prep"
once it has some more testing and polish.
* Add pseries-2.9 machine type
* Implement H_SIGNAL_SYS_RESET hypercall
* Consolidate the two alternate CPU init paths in pseries by
making it always go through CPU core objects to initialize CPU
* A number of bugfixes and cleanups
* Stop the guest timebase when the guest is stopped under KVM.
This makes the guest system clock also stop when paused, which
matches the x86 behaviour.
* Some preliminary cleanups leading towards implementation of the
POWER9 MMU.
There are also some changes not strictly related to ppc code, but for
its benefit:
* Limit the pxi-expander-bridge (PXB) device to x86 guests only
(it's essentially a hack to work around historical x86
limitations)
* Some additions to the 128-bit math in host_utils, necessary for
some of the new instructions.
* Revise a number of qtests and enable them for ppc
# gpg: Signature made Thu 02 Feb 2017 01:40:16 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170202: (107 commits)
hw/ppc/pnv: Use error_report instead of hw_error if a ROM file can't be found
ppc/kvm: Handle the "family" CPU via alias instead of registering new types
target/ppc/mmu_hash64: Fix incorrect shift value in amr calculation
target/ppc/mmu_hash64: Fix printing unsigned as signed int
tcg/POWER9: NOOP the cp_abort instruction
target/ppc/debug: Print LPCR register value if register exists
target-ppc: Add xststdc[sp, dp, qp] instructions
target-ppc: Add xvtstdc[sp,dp] instructions
target-ppc: Add MMU model check for booke machines
ppc: switch to constants within BUILD_BUG_ON
target/ppc/cpu-models: Fix/remove bad CPU aliases
target/ppc: Remove unused POWERPC_FAMILY(POWER)
spapr: clock should count only if vm is running
ppc: Remove unused function cpu_ppc601_rtc_init()
target/ppc: Add pcr_supported to POWER9 cpu class definition
powerpc/cpu-models: rename ISAv3.00 logical PVR definition
target-ppc: Add xvcv[hpsp, sphp] instructions
target-ppc: Add xsmulqp instruction
target-ppc: Add xsdivqp instruction
target-ppc: Add xscvsdqp and xscvudqp instructions
...
# Conflicts:
# hw/pci-bridge/Makefile.objs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'base' PCI Express Root Port includes
the common code to be re-used for all
Root Ports implementations. Most of the code
was taken from the current implementation
of Intel's IOH 3420 Root Port.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The PCI Expander Bridge (PXB) device is essentially a hack to allow
different PCIe devices to be assigned to different NUMA nodes on x86. Each
PXB is sort-of a separate PCI host bridge, except that its config space
is shared with the config space of the main PCI host bridge, rather than
being independent.
This is only necessary if the platform doesn't (easily) allow truly
independent PCI host bridges. AFAIK that's just x86.
This patch makes it possible to configure PXB out of the build, and adjusts
the default configs so it's only included on x86 targets.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Machine supports both Open Hack'Ware and OpenBIOS.
Open Hack'Ware is the default because OpenBIOS is currently unable to boot
PReP boot partitions or PReP kernels.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[dwg: Correct compile failure with KVM located by Thomas Huth]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Added CONFIG_RS6000_MC to ppc64 or it breaks testcases]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add remaining bits of the Altera NiosII R1 support into qemu, which
is documentation, MAINTAINERS file entry, configure bits, arch_init
and configuration files for both linux-user (userland binaries) and
softmmu (hardware emulation).
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jeff Da Silva <jdasilva@altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Sandra Loosemore <sandra@codesourcery.com>
Cc: Yves Vandervennet <yvanderv@altera.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-Id: <20170118220146.489-8-marex@denx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is just about the minimum required to enable compilation
without actually executing any instructions. This contains the
HPPACPU structure and the required callbacks, the gdbstub, the
basic translation loop, and a translate_one function that always
results in an illegal instruction.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Remove the Niagara stub implementation from sun4u.c and add a machine,
compatible with Legion simulator from the OpenSPARC T1 project.
The machine uses the firmware supplied with the OpenSPARC T1 project,
http://download.oracle.com/technetwork/systems/opensparc/OpenSPARCT1_Arch.1.5.tar.bz2
in the directory S10image/, and is able to boot the supplied Solaris 10 image.
Note that for compatibility with the naming conventions for SPARC machines
the new machine name is lowercase niagara.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
None of the ColdFire boards that we currently support has a PCI or
USB bus (and AFAIK the upcoming q800 machine does not support PCI
and USB either), so we do not need these settings the config file.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20170106083956.53d08923@thl530>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
as they use completely different way to handle hotplug event
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
The goal is to emulate a PowerNV system at the level of the skiboot
firmware, which loads the OS and provides some runtime services. Power
Systems have a lower firmware (HostBoot) that does low level system
initialization, like DRAM training. This is beyond the scope of what
qemu will address in a PowerNV guest.
No devices yet, not even an interrupt controller. Just to get started,
some RAM to load the skiboot firmware, the kernel and initrd. The
device tree is fully created in the machine reset op.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: - updated for qemu-2.7
- replaced fprintf by error_report
- used a common definition of _FDT macro
- removed VMStateDescription as migration is not yet supported
- added IBM Copyright statements
- reworked kernel_filename handling
- merged PnvSystem and sPowerNVMachineState
- removed PHANDLE_XICP
- added ppc_create_page_sizes_prop helper
- removed nmi support
- removed kvm support
- updated powernv machine to version 2.8
- removed chips and cpus, They will be provided in another patches
- added a machine reset routine to initialize the device tree (also)
- french has a squelette and english a skeleton.
- improved commit log.
- reworked prototypes parameters
- added a check on the ram size (thanks to Michael Ellerman)
- fixed chip-id cell
- changed MAX_CPUS to 2048
- simplified memory node creation to one node only
- removed machine version
- rewrote the device tree creation with the fdt "rw" routines
- s/sPowerNVMachineState/PnvMachineState/
- etc.]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In order to cleanup linux-user, we need support for most relatively
modern syscalls. unicore32 lacks support for syscalls like
epoll_pwait, preventing cleaning up the CONFIG_EPOLL mess.
This patch can be reverted when unicore32 starts either supporting
the syscalls as defined in mainline kernel, or the oldabi interface
gains support for syscalls supported since at kernel 2.6.19 / glibc 2.6
Cc: MPRC <zhangheng@mprc.pku.edu.cn>
Cc: Xuetao Guan <gxt@mprc.pku.edu.cn>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add the STM32F2xx ADC device. This device randomly
generates values on each read.
This also includes creating a hw/adc directory.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 3240e660adaf537f55a63ce06096e844aece8cda.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CONFIG_PIIX_PCI=y setting was added in
commit 70615c38de
Author: Blue Swirl <blauwirbel@gmail.com>
Date: Mon Mar 22 20:18:40 2010 +0000
Compile sound devices only once
but nothing in that commit, nor anything pre-existing,
ever referenced CONFIG_PIIX_PCI.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473096320-1638-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The use of the CONFIG_ISA_MMIO setting was removed in
commit 61fcb62862
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Mon Jul 22 15:54:24 2013 +0200
isa_mmio: delete
but this commit only removed it from some of the default
config files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473096320-1638-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CONFIG_PAM=y setting was added in
commit c0907c9e64
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Tue Feb 5 15:06:20 2013 +0100
hw: move PCI bridges to hw/pci-* or hw/ARCH
but nothing in that commit, nor anything pre-existing,
ever referenced CONFIG_PAM.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473096320-1638-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a minimal model for the devcfg device which is part of Zynq.
This model supports DMA capabilities and interrupt generation.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 83df49d8fa2d203a421ca71620809e4b04754e65.1467053537.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Leave the core ICP/ICS logic in xics.c and move the top level
class wrapper, hypercall and RTAS handlers to xics_spapr.c
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[add cpu.h in xics_spapr.c, move set_nr_irqs and set_nr_servers to
xics_spapr.c]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Implement an I2C slave which implements DDC and returns the
EDID data for an attached monitor.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1465833014-21982-7-git-send-email-fred.konrad@greensocs.com
- Rebased on the current master.
- Modified for QOM.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
[PMM: actually wire up the vmstate to dc->vmsd]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This introduces dpcd module.
It wires on a aux-bus and can be accessed by the driver to get lane-speed, etc.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This introduces a new bus: aux-bus.
It contains an address space for aux slaves devices and a bridge to an I2C bus
for I2C through AUX transactions.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1465833014-21982-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch introduces emulation for the Intel 82574 adapter, AKA e1000e.
This implementation is derived from the e1000 emulation code, and
utilizes the TX/RX packet abstractions that were initially developed for
the vmxnet3 device. Although some parts of the introduced code may be
shared with e1000, the differences are substantial enough so that the
only shared resources for the two devices are the definitions in
hw/net/e1000_regs.h.
Similarly to vmxnet3, the new device uses virtio headers for task
offloads (for backends that support virtio extensions). Usage of
virtio headers may be forcibly disabled via a boolean device property
"vnet" (which is enabled by default). In such case task offloads
will be performed in software, in the same way it is done on
backends that do not support virtio headers.
The device code is split into two parts:
1. hw/net/e1000e.c: QEMU-specific code for a network device;
2. hw/net/e1000e_core.[hc]: Device emulation according to the spec.
The new device name is e1000e.
Intel specifications for the 82574 controller are available at:
http://www.intel.com/content/dam/doc/datasheet/82574l-gbe-controller-datasheet.pdf
Throughput measurement results (iperf2):
Fedora 22 guest, TCP, RX
4 ++------------------------------------------+
| |
| X X X X X
3.5 ++ X X X X |
| X |
| |
3 ++ |
G | X |
b | |
/ 2.5 ++ |
s | |
| |
2 ++ |
| |
| |
1.5 X+ |
| |
+ + + + + + + + + + + +
1 ++--+---+---+---+---+---+---+---+---+---+---+
32 64 128 256 512 1 2 4 8 16 32 64
B B B B B KB KB KB KB KB KB KB
Buffer size
Fedora 22 guest, TCP, TX
18 ++-------------------------------------------+
| X |
16 ++ X X X X X
| X |
14 ++ |
| |
12 ++ |
G | X |
b 10 ++ |
/ | |
s 8 ++ |
| |
6 ++ X |
| |
4 ++ |
| X |
2 ++ X |
X + + + + + + + + + + +
0 ++--+---+---+---+---+----+---+---+---+---+---+
32 64 128 256 512 1 2 4 8 16 32 64
B B B B B KB KB KB KB KB KB KB
Buffer size
Fedora 22 guest, UDP, RX
3 ++------------------------------------------+
| X
| |
2.5 ++ |
| |
| |
2 ++ X |
G | |
b | |
/ 1.5 ++ |
s | X |
| |
1 ++ |
| |
| X |
0.5 ++ |
| X |
X + + + + +
0 ++-------+--------+-------+--------+--------+
32 64 128 256 512 1
B B B B B KB
Datagram size
Fedora 22 guest, UDP, TX
1 ++------------------------------------------+
| X
0.9 ++ |
| |
0.8 ++ |
0.7 ++ |
| |
G 0.6 ++ |
b | |
/ 0.5 ++ |
s | X |
0.4 ++ |
| |
0.3 ++ |
0.2 ++ X |
| |
0.1 ++ X |
X X + + + +
0 ++-------+--------+-------+--------+--------+
32 64 128 256 512 1
B B B B B KB
Datagram size
Windows 2012R2 guest, TCP, RX
3.2 ++------------------------------------------+
| X |
3 ++ |
| |
2.8 ++ |
| |
2.6 ++ X |
G | X X X X X
b 2.4 ++ X X |
/ | |
s 2.2 ++ |
| |
2 ++ |
| X X |
1.8 ++ |
| |
1.6 X+ |
+ + + + + + + + + + + +
1.4 ++--+---+---+---+---+---+---+---+---+---+---+
32 64 128 256 512 1 2 4 8 16 32 64
B B B B B KB KB KB KB KB KB KB
Buffer size
Windows 2012R2 guest, TCP, TX
14 ++-------------------------------------------+
| |
| X X
12 ++ |
| |
10 ++ |
| |
G | |
b 8 ++ |
/ | X |
s 6 ++ |
| |
| |
4 ++ X |
| |
2 ++ |
| X X X |
+ X X + + X X + + + + +
0 X+--+---+---+---+---+----+---+---+---+---+---+
32 64 128 256 512 1 2 4 8 16 32 64
B B B B B KB KB KB KB KB KB KB
Buffer size
Windows 2012R2 guest, UDP, RX
1.6 ++------------------------------------------X
| |
1.4 ++ |
| |
1.2 ++ |
| X |
| |
G 1 ++ |
b | |
/ 0.8 ++ |
s | |
0.6 ++ X |
| |
0.4 ++ |
| X |
| |
0.2 ++ X |
X + + + + +
0 ++-------+--------+-------+--------+--------+
32 64 128 256 512 1
B B B B B KB
Datagram size
Windows 2012R2 guest, UDP, TX
0.6 ++------------------------------------------+
| X
| |
0.5 ++ |
| |
| |
0.4 ++ |
G | |
b | |
/ 0.3 ++ X |
s | |
| |
0.2 ++ |
| |
| X |
0.1 ++ |
| X |
X X + + + +
0 ++-------+--------+-------+--------+--------+
32 64 128 256 512 1
B B B B B KB
Datagram size
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This will be used by ARM virt machine as a power button.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1458221140-15232-2-git-send-email-zhaoshenglong@huawei.com
[PMM: Use hyphen rather than underscore in type names;
add a comment briefly describing what the device does]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement ITC as a single object consisting of two memory regions:
1) tag_io: ITC Configuration Tags (i.e. ITCAddressMap{0,1} registers) which
are accessible by the CPU via CACHE instruction. Also adding
MemoryRegion *itc_tag to the CPUMIPSState so that CACHE instruction will
dispatch reads/writes directly.
2) storage_io: memory-mapped ITC Storage whose address space is configurable
(i.e. enabled/remapped/resized) by writing to ITCAddressMap{0,1} registers.
ITC Storage contains FIFO and Semaphore cells. Read-only FIFO bit in the
ITC cell tag indicates the type of the cell. If the ITC Storage contains
both types of cells then FIFOs are located before Semaphores.
Since issuing thread can get blocked on the access to a cell (in E/F
Synchronized and P/V Synchronized Views) each cell has a bitmap to track
which threads are currently blocked.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Implement generic MIPS Coherent Processing System (CPS) which in this
commit just creates VPs, but it will serve as a container also for
other components like Global Configuration Registers and Cluster Power
Controller.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Add mips-softmmu-common.mak and include it in existing mips*-softmmu.mak
files to avoid having to repeat CONFIG defines four times.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Event notifiers are designed for eventfd(2). They can fall back to
pipes, but according to Paolo, event_notifier_init_fd() really
requires the real thing, and should therefore be under #ifdef
CONFIG_EVENTFD. Do that.
Its only user is ivshmem, which is currently CONFIG_POSIX. Narrow it
to CONFIG_EVENTFD.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1458066895-20632-6-git-send-email-armbru@redhat.com>
Implement basic ASPEED timer functionality for the AST2400 SoC[1]: Up to
8 timers can independently be configured, enabled, reset and disabled.
Some hardware features are not implemented, namely clock value matching
and pulse generation, but the implementation is enough to boot the Linux
kernel configured with aspeed_defconfig.
[1] http://www.aspeedtech.com/products.php?fPath=20&rId=376
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1458096317-25223-2-git-send-email-andrew@aj.id.au
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds the system mailboxes which are used to communicate with a
number of GPU peripherals on Pi/Pi2.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NFIT is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)
Currently, we only support PMEM mode. Each device has 3 structures:
- SPA structure, defines the PMEM region info
- MEM DEV structure, it has the @handle which is used to associate specified
ACPI NVDIMM device we will introduce in later patch.
Also we can happily ignored the memory device's interleave, the real
nvdimm hardware access is hidden behind host
- DCR structure, it defines vendor ID used to associate specified vendor
nvdimm driver. Since we only implement PMEM mode this time, Command
window and Data window are not needed
The NVDIMM functionality is controlled by the parameter, 'nvdimm', which
is introduced for the machine, there is a example to enable it:
-machine pc,nvdimm -m 8G,maxmem=100G,slots=100 -object \
memory-backend-file,id=mem1,share,mem-path=/tmp/nvdimm1,size=10G -device \
nvdimm,memdev=mem1,id=nv1
It is disabled on default
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce "nvdimm" device which is based on pc-dimm device type
Currently, nothing is specific for nvdimm but hotplug is disabled
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This provides the simulation of the BT hardware interface for
IPMI.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This provides the simulation of the KCS hardware interface.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds an interface for IPMI that connects to a remote
BMC over a chardev (generally a TCP socket). The OpenIPMI
lanserv simulator describes this interface, see that for
interface details.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This provides a minimal local BMC, basically enough to comply with the
spec and provide a complete watchdog timer (including a sensor, SDR,
and event).
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the basic IPMI types and infrastructure to QEMU. Low-level
interfaces and simulation interfaces will register with this; it's
kind of the go-between to tie them together.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'hyperv-testdev' will be used by kvm-unit-tests
to setup Hyper-V SynIC SINT's routing and to inject
Hyper-V SynIC SINT's.
Hyper-V test device is ISA type device that creates 0x3000
IO memory region and catches write access into it. Every
write operation data decoded into ctl code and parameters
for Hyper-V test device.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The uses of the CONFIG_GDBSTUB_XML define were removed in commit
b77abd95a9, but the define in aarch64-linux-user.mak somehow
escaped the cull (the patchset probably crossed in the mail with
the patches adding aarch64 support). Remove the stray define.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1447690178-4560-1-git-send-email-peter.maydell@linaro.org
ivshmem doesn't actually require kvm, so enable it when POSIX is
enabled. (it is required however when ioeventfd is enabled)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
It works fine with the Linux driver out of the box
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ICC bus impl has been droped, so all icc related files are not useful
any more; delete them.
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Initialize a hotplug memory region under which all the hotplugged
memory is accommodated. Also enable memory hotplug by setting
CONFIG_MEM_HOTPLUG.
Modelled on i386 memory hotplug.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add related configuration and make files for tilegx.
The target can now build, though not run anything.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP1588E5A03AD5E94B07E988B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This one just syncs x86_64 and i386.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For now we support the following devices:
* CPU: ARM926
* Interrupt Controller: AVIC
* CCM
* UART x 5
* EPIT x 2
* GPT x 4
* FEC
* I2C x 3
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 62218bfa90f9101f79098e768c3d58bd92dcb7f3.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is based on mcf_fec.c FEC implementation for Coldfire
* A generic PHY was added (borrowwed from LAN9118)
* The buffer management is also modified as buffers are
slightly different between Coldfire and i.MX
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: fb314f8a120aa49f8f6ad886f312c649b484fb5a.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The slave mode is not implemented.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 508dbf2ebe26ec383d3a12a1db5a7890ac8acf20.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For now we support the following devices:
* CPU: ARM1136
* Interrupt Controller: AVIC
* CCM
* UART x 2
* EPIT x 2
* GPT
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f146d819594e41568daec42a1d0f440cdfe3df76.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch generates smbios tables for ARM mach-virt. Also add
CONFIG_SMBIOS=y for ARM default config.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1440615870-9518-3-git-send-email-wei@redhat.com
[PMM: Added missing braces around an if().]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To share smbios among different architectures, this patch moves SMBIOS
code (smbios.c and smbios.h) from x86 specific folders into new
hw/smbios directories. As a result, CONFIG_SMBIOS=y is defined in
x86 default config files.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MIPS doesn't need it, and including it creates problem as we are adding
dependency on ISA LPC bridge.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds a virtio-vga device. It is simliar to virtio-gpu-pci,
but it also adds in vga compatibility, so guests without native
virtio-gpu support can drive the device in vga mode. It is compatible
with stdvga.
Written by Dave Airlie and Gerd Hoffmann.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch introduces a new diag288 watchdog device that will, just like
other watchdogs, monitor a guest and take corresponding actions when it
detects that the guest is not responding.
diag288 is s390x specific. The wiring to s390x KVM will be done in
separate patches.
Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split out qemu-option.hx base changes]
Remove now useless device models from other MIPS configurations
We're now compiling 12 files less than before.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
As core.c, piix4.c, ich9.c and pcihp.c are for x86, add CONFIG_ACPI_X86
to make it only for x86. ARM doesn't support cpu and memory hotplug, add
CONFIG_ACPI_CPU_HOTPLUG and CONFIG_ACPI_MEMORY_HOTPLUG to exclude them
for target-arm.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-24-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With quad Cortex-A53 CPUs.
Use SMC PSCI, with the standard policy of secondaries starting in
power-off.
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a16202a6c7b79e446e5289d38cb18d2ee4b897a0.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Theres no difference in defconfig. Going forward microblazeel should
superset microblaze so use an include.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Boards that do not include an USB controller should not provide
USB devices. However, when running "qemu-system-s390x -device help"
for example, there's still a usb-hub, usb-kbd, usb-mouse and
usb-tablet in the list of "supported" devices. Let's fix that
by compiling and linking the USB files only if it is really
necessary.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
pci.mak includes a lot of devices - and most of them do not make
sense on s390x, like USB controllers or audio cards. These devices
also show up when running "qemu-system-s390x -device help" and thus
could raise the hope for the users that they could use these kind
of devices with qemu-system-s390x. To avoid this confusion, we
should not include pci.mak and rather include the bare minimum
manually instead.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Message-Id: <1426169954-6062-1-git-send-email-thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Rename config option from "glx" to "opengl", glx will not be the only
option for opengl in near future. Also switch over to pkg-config for
opengl support detection.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This patch adds the stm32f205 SoC. This will be used by the
Netduino 2 to create a machine.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 48d509747a1ea0d8a7d5480560495e679990f9d2.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the stm32f2xx System Configuration
Controller. This is used to configure what memory is mapped
at address 0 (although that is not supported) as well
as configure how the EXTI interrupts work (also not
supported at the moment).
This device is not required for basic examples, but more
complex systems will require it (as well as the EXTI device)
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5d499d7b60b61d5d6dcb310b2e55411b1f53794e.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the stm32f2xx USART controller
(UART also uses the same controller).
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 762c6c0d2a41d574932bc4445ec9bfffe6da8798.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the stm32f2xx timers: TIM2, TIM3, TIM4 and TIM5
to QEMU.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 155091a323390f8da3cca496e4c611c493e62a77.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 9c9984242c as even when
it was applied, all supposedly new config options were already enabled.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
=LY/j
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (130 commits)
acpi: drop unused code
aml-build: comment fix
acpi-build: fix typo in comment
acpi: update generated files
vhost user:support vhost user nic for non msi guests
aml-build: fix build for glib < 2.22
acpi: update generated files
Makefile.target: binary depends on config-devices
acpi-test-data: update after pci rewrite
acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
pci-hotplug-old: Has been dead for five major releases, bury
pci: Give a few helpers internal linkage
acpi: make build_*() routines static to aml-build.c
pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
pc: acpi-build: drop template patching and create PCI bus tree dynamically
tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
pc: acpi-build: simplify PCI bus tree generation
tests: add ACPI blobs for qemu with bridge cases
tests: bios-tables-test: add support for testing bridges
tests: ACPI test blobs update due to PCI0._CRS changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
hw/pci/pci-hotplug-old.c
Commit 79ca616 (v1.6.0) accidentally disabled legacy x86-only HMP
commands pci_add, pci_del: it defined CONFIG_PCI_HOTPLUG only as make
variable, not as preprocessor macro, killing the code conditional on
defined(CONFIG_PCI_HOTPLUG_OLD).
In all this time, nobody reported the loss. I only noticed it when I
tried to test some error reporting change that forced me to touch this
old crap again.
Fun: git-log hw/pci/pci-hotplug-old.c shows our faith in the backward
compatibility god has been strong enough to sacrifice at its altar
about a dozen times, but not strong enough to even once verify the
legacy feature's still there, let alone works.
Remove the commands along with the code backing them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently the ivshmem device is built whenever both PCI and KVM support are
included. This patch gives it its own config option to allow easier
customization of whether to include it. It's enabled by default in the
same circumstances as now - when both PCI and KVM are available.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425017077-18487-4-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the "platform-bus" device is included for all softmmu builds.
This bridge is intended for use on any platforms that require dynamic
creation of sysbus devices. However, at present it is used only for the
PPC E500 target, with plans for the ARM "virt" target in the immediate
future.
To avoid a not-very-useful entry appearing in "qemu -device ?" output on
other targets, this patch makes a specific config option for platform-bus
and enables it (for now) only on ppc configurations which include E500
and on ARM (which always includes the "virt" target).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1425017077-18487-3-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The i82801b11, ioh3420 and xio3130 PCI Express devices are currently
included in the build unconditionally.
While they could theoretically appear on any target platform with PCI-E,
they're pretty unlikely to appear on platforms that aren't Intel derived.
Therefore, to avoid presenting unlikely-to-be-relevant devices to the user,
add config options to enable these components, and enable them by default
only on x86 and arm platforms.
(Note that this patch does include these for aarch64, via its inclusion of
arm-softmmu.mak).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425017077-18487-2-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A number of ARM embedded boards include EHCI USB host controllers which
appear as directly mapped devices, rather than sitting on a PCI bus.
At present code to emulate such devices is included whenever EHCI support
is included. This patch adjusts teh config options to only include them
in builds targetting ARM by default.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Every platform that supports PCI can also spawn the Bochs VGA PCI adapter. Move
it to pci.mak to enable it for everyone.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have a working "generic" PCIe host bridge driver, we can plug
it into ARM's virt machine to always have PCIe available to normal ARM VMs.
I've successfully managed to expose a Bochs VGA device, XHCI and an e1000
into an AArch64 VM with this and they all lived happily ever after.
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
[PMM: Squashed in fix for off-by-one error in bus-range DT property
from Laszlo Ersek <lersek@redhat.com>]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I am using qemu for teaching the Linux kernel at our university. I
wrote a simple PCI device that can answer to writes/reads, generate
interrupts and perform DMA. As I am dragging it locally over 2 years,
I am sending it to you now.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
[Fix 32-bit compilation. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements a pci bus for s390x together with infrastructure
to generate and handle hotplug events, to configure/unconfigure via
sclp instruction, to do iommu translations and provide s390 support for
MSI/MSI-X notification processing.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Support for PCI devices following the "SD Host Controller Simplified
Specification Version 2.00" spec.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the regression introduced with commit
47934d0aad [hw: move ISA bridges and
devices to hw/isa/, configure with default-configs/], by removing
CONFIG_VT82C686 from configurations that previously did not enable it.
That southbridge is only available on Fulong platforms (CONFIG_FULONG)
that are exclusively little-endian, 64-bit MIPS. Previously vt82c686.o
was pulled explicitly with obj-$(CONFIG_FULONG).
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
We messed up the ordering in our default configs for PPC. The top entries
are generic entries, then come sections that indicate that features are only
in because of a special feature (such as PReP).
Fix the ordering again and while at it add eTSEC support to the ppc64 target
so that we can spawn eTSEC adapters with qemu-system-ppc64.
Signed-off-by: Alexander Graf <agraf@suse.de>
Add tcg and cpu model initialization.
Add gen_intermediate_code function.
Activate target in configure and add softmmu config.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-id: 1409572800-4116-5-git-send-email-kbastian@mail.uni-paderborn.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Each hotplug-able memory slot is a PCDIMMDevice.
A hot-add operation for a memory device:
- creates a new PCDIMMDevice and makes hotplug controller to map it into
guest address space
Hotplug operations are done through normal device_add commands.
For migration case, all hotplugged memory devices on source should be
specified on target's command line using '-device' option with
properties set to the same values as on source.
To simplify review, patch introduces only PCDIMMDevice QOM skeleton that
will be extended by following patches to implement actual memory hotplug
and related functions.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable compilation of the newly added libdecnumber library code.
Object file targets are added to Makefile.target using a newly
introduced flag CONFIG_LIBDECNUMBER. The flag is added
to the PowerPC targets (ppc[64]-linux-user, ppc[64]-softmmu).
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: add ppcemb and ppc64abi32 config]
Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce a common parent class for both cases, where kvm and non-kvm
can hook up callbacks. This will be used by follow-on patches for
adapter registration and mapping.
We now always have a flic, regardless of whether we use kvm; the
non-kvm implementation just doesn't do anything.
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Implementation of a USB Media Transfer Device device for easy
filesharing. Read-only. No access control inside qemu, it will
happily export any file it is able to open to the guest, i.e.
standard unix access rights for the qemu process apply.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This implementation doesn't include ring priority, TCP/IP Off-Load, QoS.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
- sclp event facility: cleanup structure. This allows to use
realize/unrealize as well as migration support via vmsd
- reboot: Two fixes that make reboot much more reliable
- ipl: make elf loading more robust
- flic interrupt controller: This allows to migrate floating
interrupts, as well as clear them on reset etc.
- enable async_pf feature of KVM on s390
- several sclp fixes and cleanups
- several sigp fixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=toIt
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/kvm-s390-20140227' into staging
Several features, fixes and cleanups for kvm/s390:
- sclp event facility: cleanup structure. This allows to use
realize/unrealize as well as migration support via vmsd
- reboot: Two fixes that make reboot much more reliable
- ipl: make elf loading more robust
- flic interrupt controller: This allows to migrate floating
interrupts, as well as clear them on reset etc.
- enable async_pf feature of KVM on s390
- several sclp fixes and cleanups
- several sigp fixes and cleanups
* remotes/borntraeger/tags/kvm-s390-20140227: (22 commits)
s390x/ipl: Fix crash of ELF images with arbitrary entry points
s390x/kvm: Rework priv instruction handlers
s390x/kvm: Add missing SIGP CPU RESET order
s390x/kvm: Rework SIGP INITIAL CPU RESET handler
s390x/cpu: Use ioctl to reset state in the kernel
s390-ccw.img: new binary rom to match latest fixes
s390-ccw.img: Fix sporadic errors with ccw boot image - initialize css
s390-ccw.img: Fix sporadic reboot hangs: Initialize next_idx
s390x/event-facility: exploit realize/unrealize
s390x/event-facility: add support for live migration
s390x/event-facility: code restructure
s390x/event-facility: some renaming
s390x/sclp: Fixed setting of condition code register
s390x/sclp: Add missing checks to SCLP handler
s390x/sclp: Fixed the size of sccb and code parameter
s390x/eventfacility: mask out commands
s390x/virtio-hcall: Specification exception for illegal subcodes
s390x/virtio-hcall: Add range check for hypervisor call
s390x/kvm: Fixed bad SIGP SET-ARCHITECTURE handler
s390x/async_pf: Check for apf extension and enable pfault
...
Conflicts:
linux-headers/linux/kvm.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CG3 framebuffer is a simple 8-bit framebuffer for use with operating
systems such as early Solaris that do not have drivers for TCX.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
This patch implements a floating-interrupt controller device (flic)
which interacts with the s390 flic kvm_device.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds support for the Fast Ethernet MAC found on Allwinner
SoCs, together with a basic emulation of Realtek RTL8201CP PHY.
Since there is no public documentation of the Allwinner controller, the
implementation is based on Linux kernel driver.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a config for aarch64-linux-user, thereby enabling it as
a valid target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
DIGIC is Canon Inc.'s name for a family of SoC
for digital cameras and camcorders.
There is no publicly available specification for
DIGIC chips. All information about DIGIC chip
internals is based on reverse engineering efforts
made by CHDK (http://chdk.wikia.com) and
Magic Lantern (http://www.magiclantern.fm) projects
contributors.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1387188908-754-2-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a config for aarch64-softmmu; this enables building of this target.
The resulting executable doesn't know about any 64 bit CPUs, but all
the 32 bit CPUs and board models work.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-8-git-send-email-peter.maydell@linaro.org
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The ARM A9 MPCore has a timer that is global to all cores in the cluster.
The timer is shared but each core has a private independent comparator
and interrupt.
Based on version contributed by Francois LEGAL.
Signed-off-by: François LEGAL <devel@thom.fr.eu.org>
Message-id: 4918e89476b8da916be2964ec41578b50d569a37.1385969450.git.peter.crosthwaite@xilinx.com
[PC changes:
* New commit message
* Re-implemented as single timer model
* Fixed backwards counting issue in polled mode
* completed VMSD fields
* macroified magic numbers (and headerified reg definitions)
* split of as device-model-only patch
* use bitops for 64 bit register access
* Fixed auto increment mode to check condition properly
* general cleanup (names/style etc).
]
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[PMM:
* minor typo fixes
* added missing return after error_setg()
* dropped setting dc->no_user = 1
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* agraf/ppc-for-upstream: (29 commits)
spapr: Use DeviceClass::fw_name for device tree CPU node
target-ppc: Fill in OpenFirmware names for some PowerPCCPU families
target-ppc: dump-guest-memory support
dump-guest-memory: Check for the correct return value
target-ppc: Use #define for max slb entries
target-ppc: Check for error on address translation in memsave command
target-ppc: Update slb array with correct index values.
spapr-pci: enable irqfd for INTx
xics-kvm: enable irqfd for MSI
xics: Implement H_XIRR_X
xics: Implement H_IPOLL
xics-kvm: Support for in-kernel XICS interrupt controller
xics: add cpu_setup callback
xics: split to xics and xics-common
xics: add missing const specifiers to TypeInfo
xics: convert init() to realize()
xics: add pre_save/post_load dispatchers
xics: replace fprintf with error_report
spapr: move cpu_setup after kvmppc_set_papr
xics: move reset and cpu_setup
...
Message-id: 1382736474-32128-1-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Commit 9b8c69243 (since reverted) broke the ability to boot the kernel
as the value returned by unassigned_mem_read returned non-zero and left
the kernel looping forever waiting for it to change (see
integrator_led_set in the kernel code).
Relying on a varying implementation detail is incorrect anyway so this
introduces a basic stub of a memory region for the debug/LED section
on the integrator board.
Signed-off-by: Alex Bennée <alex@bennee.com>
Message-id: 1382451366-9539-1-git-send-email-alex.bennee@linaro.org
[PMM: removed three unused fields from struct IntegratorDebugState]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Recent (host) kernels support emulating the PAPR defined "XICS" interrupt
controller system within KVM. This patch allows qemu to initialize and
configure the in-kernel XICS, and keep its state in sync with qemu's XICS
state as necessary.
This should give considerable performance improvements. e.g. on a simple
IPI ping-pong test between hardware threads, using qemu XICS gives us
around 5,000 irqs/second, whereas the in-kernel XICS gives us around
70,000 irqs/s on the same hardware configuration.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[Mike Qiu <qiudayu@linux.vnet.ibm.com>: fixed mistype which caused ics_set_kvm_state() to fail]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Makefile.target: Build gdbstub-xml.o only when
TARGET_XML_FILES is not empty.
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When individual CONFIG_ switches for the A9MPcore and A15MPcore
devices were created, they were inadvertently given incorrect names
(CONFIG_ARM9MPCORE and CONFIG_ARM15MPCORE). These CPUs are
"Cortex-A9MP" and "Cortex-A15MP", and in particular the ARM9 is
a different (rather older) CPU than the Cortex-A9. Rename the
CONFIG_ switches to bring them into line with the source file
names and CPU names.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1376056215-26391-1-git-send-email-peter.maydell@linaro.org
Since commit c658b94f6e, MIPS raises
exceptions when accessing invalid memory. This is not the correct
behaviour for MIPS Malta Core LV, as the GT-64120A system controller
just ignore undecoded access. This feature is used by the Linux kernel
to probe for some devices.
Emulate the correct behaviour in QEMU by adding an empty slot covering
the entire memory space decoded by the GT-64120A.
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move the code to hw/i386, the sole remaining property is available
as !pci_enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1376069702-22330-4-git-send-email-aliguori@us.ibm.com
Rebased.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The device provides an ISA bus so that pseries can also run the
endianness test.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-24-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The device provides an ISA bus to run the endianness test on.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-23-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will let these machines run an endianness test for ISA
I/O port space.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-22-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is not used anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-15-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pci-hotplug.c and the CONFIG_PCI_HOTPLUG variable which controls its
compilation are misnamed. They're not about PCI hotplug in general, but
rather about the pci_add/pci_del interface which are now deprecated in
favour of the more general device_add/device_del interface. This patch
therefore renames them to pci-hotplug-old.c and CONFIG_PCI_HOTPLUG_OLD.
CONFIG_PCI_HOTPLUG=y was listed twice in {i386,x86_64}-softmmu.make for no
particular reason, so we clean that up too. In addition it was included in
ppc64-softmmu.mak for which the old hotplug interface was never used and is
unsuitable, so we remove that too.
Most of pci-hotplug.c was additionaly protected by #ifdef TARGET_I386. The
small piece which wasn't is only called from the pci_add and pci_del hooks
in hmp-commands.hx, which themselves were protected by #ifdef TARGET_I386.
This patch therefore also removes the #ifdef from pci-hotplug-old.c,
and changes the ifdefs in hmp-commands.hx to use CONFIG_PCI_HOTPLUG_OLD.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enables support for the in-kernel MPIC that thas been merged into the
KVM next branch. This includes irqfd/KVM_IRQ_LINE support from Alex
Graf (along with some other improvements).
Note from Alex regarding kvm_irqchip_create():
On x86, one would call kvm_irqchip_create() to initialize an
in-kernel interrupt controller. That function then goes ahead and
initializes global capability variables as well as the default irq
routing table.
On ppc, we can't call kvm_irqchip_create() because we can have
different types of interrupt controllers. So we want to do all the
things that function would do for us in the in-kernel device init
handler.
Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: squash in kvm_irqchip_commit_routes patch, fix non-kvm build,
fix ppcemb]
Signed-off-by: Alexander Graf <agraf@suse.de>
Initial commit for emulated Non-Volatile-Memory Express (NVMe) pci
storage device.
NVMe is an open, industry driven storage specification defining
an optimized register and command set designed to deliver the full
capabilities of non-volatile memory on PCIe SSDs. Further information
may be found on the organizations website at:
http://www.nvmexpress.org/
This commit implements the minimum from the specification to work with
existing drivers.
Cc: Keith Busch <keith.busch@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we know we're compiling with libfdt we can remove the
CONFIG_FDT conditionals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1369409217-7553-5-git-send-email-peter.maydell@linaro.org
...or they will bitrot to death.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 5181234A.6060504@web.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Provides a hotpluggable bus for APIC and CPU.
* icc-bridge will serve as a parent for icc-bus and provide
mmio mapping services to child icc-devices.
* icc-device will replace SysBusDevice as a parent of APIC
and IOAPIC devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
pvpanic device is used to send guest panic event from guest to qemu.
When guest panic happens, pvpanic device driver will write a event
number to IO port 0x505(which is the IO port occupied by pvpanic device,
by default). On receiving the event, pvpanic device will pause guest
cpu(s), and send a qmp event QEVENT_GUEST_PANICKED.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: b66077a40235b3531632a05a6ff373850afc7d2e.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Paolo Bonzini (5) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
vhost-scsi-s390: new device supporting the tcm_vhost Linux kernel module
vhost-scsi-ccw: new device supporting the tcm_vhost Linux kernel module
vhost-scsi-pci: new device supporting the tcm_vhost Linux kernel module
vhost-scsi: new device supporting the tcm_vhost Linux kernel module
virtio: simplify Makefile conditionals
virtio-scsi: create VirtIOSCSICommon
vhost: Add vhost_commit callback for SeaBIOS ROM region re-mapping
scsi: VMWare PVSCSI paravirtual device implementation
scsi: avoid assertion failure on VERIFY command
Message-id: 1366381460-6041-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds a new device that we can use for testing PCI PIO and MMIO, with and
without ioeventfd in different configurations. FAST_MMIO will be added if/when
kvm supports it. Also included are minor cleanups in kvm APIs that it needs.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRbIJQAAoJECgfDbjSjVRpQuoH/RfMHb6YYfsuwJKUsjCKxhdr
695YqNsBLmh7E/+wr1dwUsKrMGSF97VSGAIPeX0u4wwP6jrORhA9iycCevXYlh/S
O7RTcePqVEQrwnMX5rOAEWGARVzg4hAT8i4Pdza1A+gBvaO/WLZIVJfUOHBAZNL7
2TTDymfixipErcTcxckITHfaShn9ajZgt/Yo8oVX70VqklWU+OEU/tYEXmvTC0H3
bTuTU3vpeAlCubF0AHHZqWA9g7myrKMCxwv4LWx7gmQGXoyQesy4s5C9KMrld1On
RovLw0REbtjB2xGjAj3g82ESK5eoi295Th/E7Fu1NJNYyDyfhxB7/cnbRa+Wpsg=
=jvZE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci: add pci test device
This adds a new device that we can use for testing PCI PIO and MMIO, with and
without ioeventfd in different configurations. FAST_MMIO will be added if/when
kvm supports it. Also included are minor cleanups in kvm APIs that it needs.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 15 Apr 2013 05:42:24 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pci: add pci test device
kvm: support non datamatch ioeventfd
kvm: support any size for pio eventfd
kvm: remove unused APIs
Message-id: cover.1366272004.git.mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
[ Rename files to vmw_pvscsi, fix setting of hostStatus in
pvscsi_request_cancelled - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This device is used for kvm unit tests,
currently it supports testing performance of ioeventfd.
Using updated kvm unittest, here's an example output:
mmio-no-eventfd:pci-mem 8796
mmio-wildcard-eventfd:pci-mem 3609
mmio-datamatch-eventfd:pci-mem 3685
portio-no-eventfd:pci-io 5287
portio-wildcard-eventfd:pci-io 1762
portio-datamatch-eventfd:pci-io 1777
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A non-native i386 or x86_64 emulator should not have TPM passthrough
support, since the TPM is only present for those hosts.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 0434e30afb accidentally removed
the compilation of arm11mpcore.c.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a regression introduced by c0907c9e64. How to reproduce:
$ qemu-system-x86_64 -nodefaults -vnc :0 -M q35
qemu-system-x86_64: Unknown device 'q35-pcihost' for default sysbus
Aborted (core dumped)
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Device model for Primecell PL330 DMA controller.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Tested-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 098aac26233d7334bed2bca4f06f539638ca6d24.1361853677.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Build the TPM passthrough driver only for i386 and x86_64 targets
using the default-configs files for those targets with softmmu.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-8-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Build the TPM frontend code that has been added so far.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-5-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Device model for standard SD Host Controller Interface (SDHCI) compliant with
version 2.00 of SD association specification.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Leave the core usb devices (usb hub, tablet, mouse, keyboard)
enabled unconditionally. Make the other ones configurable.
Exceptions:
- bluetooth: not qdevified yet, has a vl.c dependency because
of that, thus disabling isn't as easy as not linking the
object file.
- smardcard: ccid-card-emulated depends on that one *and*
CONFIG_SMARTCARD_NSS. So it isn't a one-liner and comes
as separate patch because of that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The TPCI200 is a PCI board that supports up to 4 IndustryPack modules.
A new bus type called 'IndustryPack' has been created so any
compatible module can be attached to this board.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
OpenBIOS on sparc64 only support Standard VGA and not Cirrus VGA. Don't
build Cirrus VGA support so that it can't be selected.
This fixes the breakage introduced by commit f2898771.
Reported-by: Richard Henderson <rth@twiddle.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We can't however replace the built-in IDE controller, as the one in
pc87312 is only single-channel and can use only IRQ 14. Therefore the
pc87312's IDE function gets disabled via the config property.
PReP emulation also gains a parallel port emulation this way.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[AF: Use TYPE_PC87312 constant, add to ppc64-softmmu and to MAINTAINERS]
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Avoids some unnecessary dependencies on cpu.h and prepares for
a future armeb-softmmu where most machines would not be built.
Defer touching the SoC devices since most have implicit or explicit
dependencies on the CPU.
Signed-off-by: Andreas Färber <andreas.faerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds puv3 ostimer support, include os timer
device simulation and ptimer support in puv3 machine.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch only add puv3 soc/board support, which introduces puv3
machine description, and specifies console type.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds unicore32-softmmu build support, include configure,
makefile, arch_init, and all missing functions needed by softmmu.
Although all missing functions are empty, unicore32-softmmu could
be build successfully.
By 20120804: change QEMU_ARCH_UNICORE32 to 0x4000
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
sparc machines loose ability to instanciate PCI ESP SCSI adapter,
which is not a big loose as they don't have PCI bus support.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The PCI version is supported in lots of Operating Systems,
and has been successfully tested on:
- MS DOS 6.22 (using DC390 driver)
- MS Windows 3.11 (using DC390 driver)
- MS Windows 98 SE (using default driver)
- MS Windows NT 3.1 (using DC390 driver)
- MS Windows NT 4.0 (using default driver)
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
