hw/char/cmsdk-apb-uart.c: Implement CMSDK APB UART
Implement a model of the simple "APB UART" provided in the Cortex-M System Design Kit (CMSDK). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500029487-14822-3-git-send-email-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
This commit is contained in:
Peter Maydell
parent
2eb5578b47
commit
775df84e48
@ -96,6 +96,8 @@ CONFIG_STM32F2XX_ADC=y
|
||||
CONFIG_STM32F2XX_SPI=y
|
||||
CONFIG_STM32F205_SOC=y
|
||||
|
||||
CONFIG_CMSDK_APB_UART=y
|
||||
|
||||
CONFIG_VERSATILE_PCI=y
|
||||
CONFIG_VERSATILE_I2C=y
|
||||
|
||||
|
||||
@ -19,6 +19,7 @@ obj-$(CONFIG_DIGIC) += digic-uart.o
|
||||
obj-$(CONFIG_STM32F2XX_USART) += stm32f2xx_usart.o
|
||||
obj-$(CONFIG_RASPI) += bcm2835_aux.o
|
||||
|
||||
common-obj-$(CONFIG_CMSDK_APB_UART) += cmsdk-apb-uart.o
|
||||
common-obj-$(CONFIG_ETRAXFS) += etraxfs_ser.o
|
||||
common-obj-$(CONFIG_ISA_DEBUG) += debugcon.o
|
||||
common-obj-$(CONFIG_GRLIB) += grlib_apbuart.o
|
||||
|
||||
403
hw/char/cmsdk-apb-uart.c
Normal file
403
hw/char/cmsdk-apb-uart.c
Normal file
@ -0,0 +1,403 @@
|
||||
/*
|
||||
* ARM CMSDK APB UART emulation
|
||||
*
|
||||
* Copyright (c) 2017 Linaro Limited
|
||||
* Written by Peter Maydell
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
/* This is a model of the "APB UART" which is part of the Cortex-M
|
||||
* System Design Kit (CMSDK) and documented in the Cortex-M System
|
||||
* Design Kit Technical Reference Manual (ARM DDI0479C):
|
||||
* https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit
|
||||
*/
|
||||
|
||||
#include "qemu/osdep.h"
|
||||
#include "qemu/log.h"
|
||||
#include "qapi/error.h"
|
||||
#include "trace.h"
|
||||
#include "hw/sysbus.h"
|
||||
#include "hw/registerfields.h"
|
||||
#include "chardev/char-fe.h"
|
||||
#include "chardev/char-serial.h"
|
||||
#include "hw/char/cmsdk-apb-uart.h"
|
||||
|
||||
REG32(DATA, 0)
|
||||
REG32(STATE, 4)
|
||||
FIELD(STATE, TXFULL, 0, 1)
|
||||
FIELD(STATE, RXFULL, 1, 1)
|
||||
FIELD(STATE, TXOVERRUN, 2, 1)
|
||||
FIELD(STATE, RXOVERRUN, 3, 1)
|
||||
REG32(CTRL, 8)
|
||||
FIELD(CTRL, TX_EN, 0, 1)
|
||||
FIELD(CTRL, RX_EN, 1, 1)
|
||||
FIELD(CTRL, TX_INTEN, 2, 1)
|
||||
FIELD(CTRL, RX_INTEN, 3, 1)
|
||||
FIELD(CTRL, TXO_INTEN, 4, 1)
|
||||
FIELD(CTRL, RXO_INTEN, 5, 1)
|
||||
FIELD(CTRL, HSTEST, 6, 1)
|
||||
REG32(INTSTATUS, 0xc)
|
||||
FIELD(INTSTATUS, TX, 0, 1)
|
||||
FIELD(INTSTATUS, RX, 1, 1)
|
||||
FIELD(INTSTATUS, TXO, 2, 1)
|
||||
FIELD(INTSTATUS, RXO, 3, 1)
|
||||
REG32(BAUDDIV, 0x10)
|
||||
REG32(PID4, 0xFD0)
|
||||
REG32(PID5, 0xFD4)
|
||||
REG32(PID6, 0xFD8)
|
||||
REG32(PID7, 0xFDC)
|
||||
REG32(PID0, 0xFE0)
|
||||
REG32(PID1, 0xFE4)
|
||||
REG32(PID2, 0xFE8)
|
||||
REG32(PID3, 0xFEC)
|
||||
REG32(CID0, 0xFF0)
|
||||
REG32(CID1, 0xFF4)
|
||||
REG32(CID2, 0xFF8)
|
||||
REG32(CID3, 0xFFC)
|
||||
|
||||
/* PID/CID values */
|
||||
static const int uart_id[] = {
|
||||
0x04, 0x00, 0x00, 0x00, /* PID4..PID7 */
|
||||
0x21, 0xb8, 0x1b, 0x00, /* PID0..PID3 */
|
||||
0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */
|
||||
};
|
||||
|
||||
static bool uart_baudrate_ok(CMSDKAPBUART *s)
|
||||
{
|
||||
/* The minimum permitted bauddiv setting is 16, so we just ignore
|
||||
* settings below that (usually this means the device has just
|
||||
* been reset and not yet programmed).
|
||||
*/
|
||||
return s->bauddiv >= 16 && s->bauddiv <= s->pclk_frq;
|
||||
}
|
||||
|
||||
static void uart_update_parameters(CMSDKAPBUART *s)
|
||||
{
|
||||
QEMUSerialSetParams ssp;
|
||||
|
||||
/* This UART is always 8N1 but the baud rate is programmable. */
|
||||
if (!uart_baudrate_ok(s)) {
|
||||
return;
|
||||
}
|
||||
|
||||
ssp.data_bits = 8;
|
||||
ssp.parity = 'N';
|
||||
ssp.stop_bits = 1;
|
||||
ssp.speed = s->pclk_frq / s->bauddiv;
|
||||
qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
|
||||
trace_cmsdk_apb_uart_set_params(ssp.speed);
|
||||
}
|
||||
|
||||
static void cmsdk_apb_uart_update(CMSDKAPBUART *s)
|
||||
{
|
||||
/* update outbound irqs, including handling the way the rxo and txo
|
||||
* interrupt status bits are just logical AND of the overrun bit in
|
||||
* STATE and the overrun interrupt enable bit in CTRL.
|
||||
*/
|
||||
uint32_t omask = (R_INTSTATUS_RXO_MASK | R_INTSTATUS_TXO_MASK);
|
||||
s->intstatus &= ~omask;
|
||||
s->intstatus |= (s->state & (s->ctrl >> 2) & omask);
|
||||
|
||||
qemu_set_irq(s->txint, !!(s->intstatus & R_INTSTATUS_TX_MASK));
|
||||
qemu_set_irq(s->rxint, !!(s->intstatus & R_INTSTATUS_RX_MASK));
|
||||
qemu_set_irq(s->txovrint, !!(s->intstatus & R_INTSTATUS_TXO_MASK));
|
||||
qemu_set_irq(s->rxovrint, !!(s->intstatus & R_INTSTATUS_RXO_MASK));
|
||||
qemu_set_irq(s->uartint, !!(s->intstatus));
|
||||
}
|
||||
|
||||
static int uart_can_receive(void *opaque)
|
||||
{
|
||||
CMSDKAPBUART *s = CMSDK_APB_UART(opaque);
|
||||
|
||||
/* We can take a char if RX is enabled and the buffer is empty */
|
||||
if (s->ctrl & R_CTRL_RX_EN_MASK && !(s->state & R_STATE_RXFULL_MASK)) {
|
||||
return 1;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void uart_receive(void *opaque, const uint8_t *buf, int size)
|
||||
{
|
||||
CMSDKAPBUART *s = CMSDK_APB_UART(opaque);
|
||||
|
||||
trace_cmsdk_apb_uart_receive(*buf);
|
||||
|
||||
/* In fact uart_can_receive() ensures that we can't be
|
||||
* called unless RX is enabled and the buffer is empty,
|
||||
* but we include this logic as documentation of what the
|
||||
* hardware does if a character arrives in these circumstances.
|
||||
*/
|
||||
if (!(s->ctrl & R_CTRL_RX_EN_MASK)) {
|
||||
/* Just drop the character on the floor */
|
||||
return;
|
||||
}
|
||||
|
||||
if (s->state & R_STATE_RXFULL_MASK) {
|
||||
s->state |= R_STATE_RXOVERRUN_MASK;
|
||||
}
|
||||
|
||||
s->rxbuf = *buf;
|
||||
s->state |= R_STATE_RXFULL_MASK;
|
||||
if (s->ctrl & R_CTRL_RX_INTEN_MASK) {
|
||||
s->intstatus |= R_INTSTATUS_RX_MASK;
|
||||
}
|
||||
cmsdk_apb_uart_update(s);
|
||||
}
|
||||
|
||||
static uint64_t uart_read(void *opaque, hwaddr offset, unsigned size)
|
||||
{
|
||||
CMSDKAPBUART *s = CMSDK_APB_UART(opaque);
|
||||
uint64_t r;
|
||||
|
||||
switch (offset) {
|
||||
case A_DATA:
|
||||
r = s->rxbuf;
|
||||
s->state &= ~R_STATE_RXFULL_MASK;
|
||||
cmsdk_apb_uart_update(s);
|
||||
break;
|
||||
case A_STATE:
|
||||
r = s->state;
|
||||
break;
|
||||
case A_CTRL:
|
||||
r = s->ctrl;
|
||||
break;
|
||||
case A_INTSTATUS:
|
||||
r = s->intstatus;
|
||||
break;
|
||||
case A_BAUDDIV:
|
||||
r = s->bauddiv;
|
||||
break;
|
||||
case A_PID4 ... A_CID3:
|
||||
r = uart_id[(offset - A_PID4) / 4];
|
||||
break;
|
||||
default:
|
||||
qemu_log_mask(LOG_GUEST_ERROR,
|
||||
"CMSDK APB UART read: bad offset %x\n", (int) offset);
|
||||
r = 0;
|
||||
break;
|
||||
}
|
||||
trace_cmsdk_apb_uart_read(offset, r, size);
|
||||
return r;
|
||||
}
|
||||
|
||||
/* Try to send tx data, and arrange to be called back later if
|
||||
* we can't (ie the char backend is busy/blocking).
|
||||
*/
|
||||
static gboolean uart_transmit(GIOChannel *chan, GIOCondition cond, void *opaque)
|
||||
{
|
||||
CMSDKAPBUART *s = CMSDK_APB_UART(opaque);
|
||||
int ret;
|
||||
|
||||
s->watch_tag = 0;
|
||||
|
||||
if (!(s->ctrl & R_CTRL_TX_EN_MASK) || !(s->state & R_STATE_TXFULL_MASK)) {
|
||||
return FALSE;
|
||||
}
|
||||
|
||||
ret = qemu_chr_fe_write(&s->chr, &s->txbuf, 1);
|
||||
if (ret <= 0) {
|
||||
s->watch_tag = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP,
|
||||
uart_transmit, s);
|
||||
if (!s->watch_tag) {
|
||||
/* Most common reason to be here is "no chardev backend":
|
||||
* just insta-drain the buffer, so the serial output
|
||||
* goes into a void, rather than blocking the guest.
|
||||
*/
|
||||
goto buffer_drained;
|
||||
}
|
||||
/* Transmit pending */
|
||||
trace_cmsdk_apb_uart_tx_pending();
|
||||
return FALSE;
|
||||
}
|
||||
|
||||
buffer_drained:
|
||||
/* Character successfully sent */
|
||||
trace_cmsdk_apb_uart_tx(s->txbuf);
|
||||
s->state &= ~R_STATE_TXFULL_MASK;
|
||||
/* Going from TXFULL set to clear triggers the tx interrupt */
|
||||
if (s->ctrl & R_CTRL_TX_INTEN_MASK) {
|
||||
s->intstatus |= R_INTSTATUS_TX_MASK;
|
||||
}
|
||||
cmsdk_apb_uart_update(s);
|
||||
return FALSE;
|
||||
}
|
||||
|
||||
static void uart_cancel_transmit(CMSDKAPBUART *s)
|
||||
{
|
||||
if (s->watch_tag) {
|
||||
g_source_remove(s->watch_tag);
|
||||
s->watch_tag = 0;
|
||||
}
|
||||
}
|
||||
|
||||
static void uart_write(void *opaque, hwaddr offset, uint64_t value,
|
||||
unsigned size)
|
||||
{
|
||||
CMSDKAPBUART *s = CMSDK_APB_UART(opaque);
|
||||
|
||||
trace_cmsdk_apb_uart_write(offset, value, size);
|
||||
|
||||
switch (offset) {
|
||||
case A_DATA:
|
||||
s->txbuf = value;
|
||||
if (s->state & R_STATE_TXFULL_MASK) {
|
||||
/* Buffer already full -- note the overrun and let the
|
||||
* existing pending transmit callback handle the new char.
|
||||
*/
|
||||
s->state |= R_STATE_TXOVERRUN_MASK;
|
||||
cmsdk_apb_uart_update(s);
|
||||
} else {
|
||||
s->state |= R_STATE_TXFULL_MASK;
|
||||
uart_transmit(NULL, G_IO_OUT, s);
|
||||
}
|
||||
break;
|
||||
case A_STATE:
|
||||
/* Bits 0 and 1 are read only; bits 2 and 3 are W1C */
|
||||
s->state &= ~(value &
|
||||
(R_STATE_TXOVERRUN_MASK | R_STATE_RXOVERRUN_MASK));
|
||||
cmsdk_apb_uart_update(s);
|
||||
break;
|
||||
case A_CTRL:
|
||||
s->ctrl = value & 0x7f;
|
||||
if ((s->ctrl & R_CTRL_TX_EN_MASK) && !uart_baudrate_ok(s)) {
|
||||
qemu_log_mask(LOG_GUEST_ERROR,
|
||||
"CMSDK APB UART: Tx enabled with invalid baudrate\n");
|
||||
}
|
||||
cmsdk_apb_uart_update(s);
|
||||
break;
|
||||
case A_INTSTATUS:
|
||||
/* All bits are W1C. Clearing the overrun interrupt bits really
|
||||
* clears the overrun status bits in the STATE register (which
|
||||
* is then reflected into the intstatus value by the update function).
|
||||
*/
|
||||
s->state &= ~(value & (R_INTSTATUS_TXO_MASK | R_INTSTATUS_RXO_MASK));
|
||||
cmsdk_apb_uart_update(s);
|
||||
break;
|
||||
case A_BAUDDIV:
|
||||
s->bauddiv = value & 0xFFFFF;
|
||||
uart_update_parameters(s);
|
||||
break;
|
||||
case A_PID4 ... A_CID3:
|
||||
qemu_log_mask(LOG_GUEST_ERROR,
|
||||
"CMSDK APB UART write: write to RO offset 0x%x\n",
|
||||
(int)offset);
|
||||
break;
|
||||
default:
|
||||
qemu_log_mask(LOG_GUEST_ERROR,
|
||||
"CMSDK APB UART write: bad offset 0x%x\n", (int) offset);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static const MemoryRegionOps uart_ops = {
|
||||
.read = uart_read,
|
||||
.write = uart_write,
|
||||
.endianness = DEVICE_LITTLE_ENDIAN,
|
||||
};
|
||||
|
||||
static void cmsdk_apb_uart_reset(DeviceState *dev)
|
||||
{
|
||||
CMSDKAPBUART *s = CMSDK_APB_UART(dev);
|
||||
|
||||
trace_cmsdk_apb_uart_reset();
|
||||
uart_cancel_transmit(s);
|
||||
s->state = 0;
|
||||
s->ctrl = 0;
|
||||
s->intstatus = 0;
|
||||
s->bauddiv = 0;
|
||||
s->txbuf = 0;
|
||||
s->rxbuf = 0;
|
||||
}
|
||||
|
||||
static void cmsdk_apb_uart_init(Object *obj)
|
||||
{
|
||||
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
|
||||
CMSDKAPBUART *s = CMSDK_APB_UART(obj);
|
||||
|
||||
memory_region_init_io(&s->iomem, obj, &uart_ops, s, "uart", 0x1000);
|
||||
sysbus_init_mmio(sbd, &s->iomem);
|
||||
sysbus_init_irq(sbd, &s->txint);
|
||||
sysbus_init_irq(sbd, &s->rxint);
|
||||
sysbus_init_irq(sbd, &s->txovrint);
|
||||
sysbus_init_irq(sbd, &s->rxovrint);
|
||||
sysbus_init_irq(sbd, &s->uartint);
|
||||
}
|
||||
|
||||
static void cmsdk_apb_uart_realize(DeviceState *dev, Error **errp)
|
||||
{
|
||||
CMSDKAPBUART *s = CMSDK_APB_UART(dev);
|
||||
|
||||
if (s->pclk_frq == 0) {
|
||||
error_setg(errp, "CMSDK APB UART: pclk-frq property must be set");
|
||||
return;
|
||||
}
|
||||
|
||||
/* This UART has no flow control, so we do not need to register
|
||||
* an event handler to deal with CHR_EVENT_BREAK.
|
||||
*/
|
||||
qemu_chr_fe_set_handlers(&s->chr, uart_can_receive, uart_receive,
|
||||
NULL, s, NULL, true);
|
||||
}
|
||||
|
||||
static int cmsdk_apb_uart_post_load(void *opaque, int version_id)
|
||||
{
|
||||
CMSDKAPBUART *s = CMSDK_APB_UART(opaque);
|
||||
|
||||
/* If we have a pending character, arrange to resend it. */
|
||||
if (s->state & R_STATE_TXFULL_MASK) {
|
||||
s->watch_tag = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP,
|
||||
uart_transmit, s);
|
||||
}
|
||||
uart_update_parameters(s);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const VMStateDescription cmsdk_apb_uart_vmstate = {
|
||||
.name = "cmsdk-apb-uart",
|
||||
.version_id = 1,
|
||||
.minimum_version_id = 1,
|
||||
.post_load = cmsdk_apb_uart_post_load,
|
||||
.fields = (VMStateField[]) {
|
||||
VMSTATE_UINT32(state, CMSDKAPBUART),
|
||||
VMSTATE_UINT32(ctrl, CMSDKAPBUART),
|
||||
VMSTATE_UINT32(intstatus, CMSDKAPBUART),
|
||||
VMSTATE_UINT32(bauddiv, CMSDKAPBUART),
|
||||
VMSTATE_UINT8(txbuf, CMSDKAPBUART),
|
||||
VMSTATE_UINT8(rxbuf, CMSDKAPBUART),
|
||||
VMSTATE_END_OF_LIST()
|
||||
}
|
||||
};
|
||||
|
||||
static Property cmsdk_apb_uart_properties[] = {
|
||||
DEFINE_PROP_CHR("chardev", CMSDKAPBUART, chr),
|
||||
DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBUART, pclk_frq, 0),
|
||||
DEFINE_PROP_END_OF_LIST(),
|
||||
};
|
||||
|
||||
static void cmsdk_apb_uart_class_init(ObjectClass *klass, void *data)
|
||||
{
|
||||
DeviceClass *dc = DEVICE_CLASS(klass);
|
||||
|
||||
dc->realize = cmsdk_apb_uart_realize;
|
||||
dc->vmsd = &cmsdk_apb_uart_vmstate;
|
||||
dc->reset = cmsdk_apb_uart_reset;
|
||||
dc->props = cmsdk_apb_uart_properties;
|
||||
}
|
||||
|
||||
static const TypeInfo cmsdk_apb_uart_info = {
|
||||
.name = TYPE_CMSDK_APB_UART,
|
||||
.parent = TYPE_SYS_BUS_DEVICE,
|
||||
.instance_size = sizeof(CMSDKAPBUART),
|
||||
.instance_init = cmsdk_apb_uart_init,
|
||||
.class_init = cmsdk_apb_uart_class_init,
|
||||
};
|
||||
|
||||
static void cmsdk_apb_uart_register_types(void)
|
||||
{
|
||||
type_register_static(&cmsdk_apb_uart_info);
|
||||
}
|
||||
|
||||
type_init(cmsdk_apb_uart_register_types);
|
||||
@ -56,3 +56,12 @@ pl011_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
|
||||
pl011_can_receive(uint32_t lcr, int read_count, int r) "LCR %08x read_count %d returning %d"
|
||||
pl011_put_fifo(uint32_t c, int read_count) "new char 0x%x read_count now %d"
|
||||
pl011_put_fifo_full(void) "FIFO now full, RXFF set"
|
||||
|
||||
# hw/char/cmsdk_apb_uart.c
|
||||
cmsdk_apb_uart_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB UART read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
|
||||
cmsdk_apb_uart_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB UART write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
|
||||
cmsdk_apb_uart_reset(void) "CMSDK APB UART: reset"
|
||||
cmsdk_apb_uart_receive(uint8_t c) "CMSDK APB UART: got character 0x%x from backend"
|
||||
cmsdk_apb_uart_tx_pending(void) "CMSDK APB UART: character send to backend pending"
|
||||
cmsdk_apb_uart_tx(uint8_t c) "CMSDK APB UART: character 0x%x sent to backend"
|
||||
cmsdk_apb_uart_set_params(int speed) "CMSDK APB UART: params set to %d 8N1"
|
||||
|
||||
78
include/hw/char/cmsdk-apb-uart.h
Normal file
78
include/hw/char/cmsdk-apb-uart.h
Normal file
@ -0,0 +1,78 @@
|
||||
/*
|
||||
* ARM CMSDK APB UART emulation
|
||||
*
|
||||
* Copyright (c) 2017 Linaro Limited
|
||||
* Written by Peter Maydell
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
#ifndef CMSDK_APB_UART_H
|
||||
#define CMSDK_APB_UART_H
|
||||
|
||||
#include "hw/sysbus.h"
|
||||
#include "chardev/char-fe.h"
|
||||
|
||||
#define TYPE_CMSDK_APB_UART "cmsdk-apb-uart"
|
||||
#define CMSDK_APB_UART(obj) OBJECT_CHECK(CMSDKAPBUART, (obj), \
|
||||
TYPE_CMSDK_APB_UART)
|
||||
|
||||
typedef struct {
|
||||
/*< private >*/
|
||||
SysBusDevice parent_obj;
|
||||
|
||||
/*< public >*/
|
||||
MemoryRegion iomem;
|
||||
CharBackend chr;
|
||||
qemu_irq txint;
|
||||
qemu_irq rxint;
|
||||
qemu_irq txovrint;
|
||||
qemu_irq rxovrint;
|
||||
qemu_irq uartint;
|
||||
guint watch_tag;
|
||||
uint32_t pclk_frq;
|
||||
|
||||
uint32_t state;
|
||||
uint32_t ctrl;
|
||||
uint32_t intstatus;
|
||||
uint32_t bauddiv;
|
||||
/* This UART has no FIFO, only a 1-character buffer for each of Tx and Rx */
|
||||
uint8_t txbuf;
|
||||
uint8_t rxbuf;
|
||||
} CMSDKAPBUART;
|
||||
|
||||
/**
|
||||
* cmsdk_apb_uart_create - convenience function to create TYPE_CMSDK_APB_UART
|
||||
* @addr: location in system memory to map registers
|
||||
* @chr: Chardev backend to connect UART to, or NULL if no backend
|
||||
* @pclk_frq: frequency in Hz of the PCLK clock (used for calculating baud rate)
|
||||
*/
|
||||
static inline DeviceState *cmsdk_apb_uart_create(hwaddr addr,
|
||||
qemu_irq txint,
|
||||
qemu_irq rxint,
|
||||
qemu_irq txovrint,
|
||||
qemu_irq rxovrint,
|
||||
qemu_irq uartint,
|
||||
Chardev *chr,
|
||||
uint32_t pclk_frq)
|
||||
{
|
||||
DeviceState *dev;
|
||||
SysBusDevice *s;
|
||||
|
||||
dev = qdev_create(NULL, TYPE_CMSDK_APB_UART);
|
||||
s = SYS_BUS_DEVICE(dev);
|
||||
qdev_prop_set_chr(dev, "chardev", chr);
|
||||
qdev_prop_set_uint32(dev, "pclk-frq", pclk_frq);
|
||||
qdev_init_nofail(dev);
|
||||
sysbus_mmio_map(s, 0, addr);
|
||||
sysbus_connect_irq(s, 0, txint);
|
||||
sysbus_connect_irq(s, 1, rxint);
|
||||
sysbus_connect_irq(s, 2, txovrint);
|
||||
sysbus_connect_irq(s, 3, rxovrint);
|
||||
sysbus_connect_irq(s, 4, uartint);
|
||||
return dev;
|
||||
}
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user