mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
bd44300d1a
qemu/default-configs
History
Cédric Le Goater bd44300d1a net: add FTGMAC100 support 
The FTGMAC100 device is an Ethernet controller with DMA function that
can be found on Aspeed SoCs (which include NCSI).

It is fully compliant with IEEE 802.3 specification for 10/100 Mbps
Ethernet and IEEE 802.3z specification for 1000 Mbps Ethernet and
includes Reduced Media Independent Interface (RMII) and Reduced
Gigabit Media Independent Interface (RGMII) interfaces. It adopts an
AHB bus interface and integrates a link list DMA engine with direct
M-Bus accesses for transmitting and receiving packets. It has
independent TX/RX fifos, supports half and full duplex (1000 Mbps mode
only supports full duplex), flow control for full duplex and
backpressure for half duplex.

The FTGMAC100 also implements IP, TCP, UDP checksum offloads and
supports IEEE 802.1Q VLAN tag insertion and removal. It offers
high-priority transmit queue for QoS and CoS applications

This model is backed with a RealTek 8211E PHY which is the chip found
on the AST2500 EVB. It is complete enough to satisfy two different
Linux drivers and a U-Boot driver. Not supported features are :

 - IEEE 802.1Q VLAN
 - High Priority Transmit Queue
 - Wake-On-LAN functions

The code is based on the Coldfire Fast Ethernet Controller model.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-24 11:30:03 +08:00
..
aarch64-linux-user.mak default-configs/aarch64-linux-user.mak: Remove unused define 2015-11-24 14:12:15 +00:00
aarch64-softmmu.mak hw/i2c-ddc.c: Implement DDC I2C slave 2016-06-14 15:59:15 +01:00
alpha-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
alpha-softmmu.mak Split serial-isa into its own config option 2017-02-06 12:33:21 +11:00
arm-linux-user.mak default-configs/: CONFIG_GDBSTUB_XML removed 2013-10-16 18:21:01 +02:00
arm-softmmu.mak net: add FTGMAC100 support 2017-04-24 11:30:03 +08:00
armeb-linux-user.mak default-configs/: CONFIG_GDBSTUB_XML removed 2013-10-16 18:21:01 +02:00
cris-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
cris-softmmu.mak hw: move NICs to hw/net/, configure via default-configs/ 2013-04-08 18:13:13 +02:00
hppa-linux-user.mak target-hppa: Add framework and enable compilation 2017-01-23 09:52:40 -08:00
i386-bsd-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
i386-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
i386-softmmu.mak ACPI: Add Virtual Machine Generation ID support 2017-03-02 07:14:27 +02:00
lm32-softmmu.mak configure: opengl overhaul 2015-03-12 15:49:57 +01:00
m68k-linux-user.mak default-configs/: CONFIG_GDBSTUB_XML removed 2013-10-16 18:21:01 +02:00
m68k-softmmu.mak m68k: Remove PCI and USB from config file 2017-01-14 10:06:21 +01:00
microblaze-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
microblaze-softmmu.mak hw: move SSI controllers to hw/ssi/, configure via default-configs/ 2013-04-08 18:13:13 +02:00
microblazeel-linux-user.mak microblaze: Correct copy+paste:o in defconfigs 2011-03-01 22:17:52 +01:00
microblazeel-softmmu.mak defconfigs: Piggyback microblazeel on microblaze 2015-04-30 16:05:48 +03:00
mips64-linux-user.mak linux-user: Add default configs for mips64[el] 2012-02-02 17:51:20 +02:00
mips64-softmmu.mak default-configs: add mips-softmmu-common.mak 2016-03-23 13:36:56 +00:00
mips64el-linux-user.mak linux-user: Add default configs for mips64[el] 2012-02-02 17:51:20 +02:00
mips64el-softmmu.mak hw/mips: MIPS Boston board support 2017-02-24 10:37:21 +00:00
mips-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
mips-softmmu-common.mak Split serial-isa into its own config option 2017-02-06 12:33:21 +11:00
mips-softmmu.mak default-configs: add mips-softmmu-common.mak 2016-03-23 13:36:56 +00:00
mipsel-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
mipsel-softmmu.mak default-configs: add mips-softmmu-common.mak 2016-03-23 13:36:56 +00:00
mipsn32-linux-user.mak linux-user: Add default-configs for mipsn32[el] 2012-02-02 17:51:20 +02:00
mipsn32el-linux-user.mak linux-user: Add default-configs for mipsn32[el] 2012-02-02 17:51:20 +02:00
moxie-softmmu.mak Allow ISA bus to be configured out 2017-02-06 12:33:21 +11:00
nios2-linux-user.mak nios2: Add support for Nios-II R1 2017-01-24 13:10:36 -08:00
nios2-softmmu.mak nios2: Add support for Nios-II R1 2017-01-24 13:10:36 -08:00
or1k-linux-user.mak target/openrisc: Rename the cpu from or32 to or1k 2017-02-14 08:14:58 +11:00
or1k-softmmu.mak target/openrisc: Rename the cpu from or32 to or1k 2017-02-14 08:14:58 +11:00
pci.mak Allow ISA bus to be configured out 2017-02-06 12:33:21 +11:00
ppc64-linux-user.mak target-ppc: Enable Building of libdecnumber 2014-06-16 13:24:29 +02:00
ppc64-softmmu.mak Split serial-isa into its own config option 2017-02-06 12:33:21 +11:00
ppc64abi32-linux-user.mak target-ppc: Enable Building of libdecnumber 2014-06-16 13:24:29 +02:00
ppc64le-linux-user.mak target-ppc: Add a new user mode target for little-endian PPC64. 2014-06-16 13:24:40 +02:00
ppc-linux-user.mak target-ppc: Enable Building of libdecnumber 2014-06-16 13:24:29 +02:00
ppc-softmmu.mak Split serial-isa into its own config option 2017-02-06 12:33:21 +11:00
ppcemb-softmmu.mak Split serial-isa into its own config option 2017-02-06 12:33:21 +11:00
s390x-linux-user.mak s390x: build s390x by default 2011-05-20 17:35:12 +02:00
s390x-softmmu.mak s390x/watchdog: introduce diag288 watchdog device 2015-06-11 17:45:49 +02:00
sh4-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
sh4-softmmu.mak Split serial-isa into its own config option 2017-02-06 12:33:21 +11:00
sh4eb-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
sh4eb-softmmu.mak Split serial-isa into its own config option 2017-02-06 12:33:21 +11:00
sound.mak audio: Enable all cards 2013-05-03 12:04:49 -05:00
sparc32plus-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
sparc64-bsd-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
sparc64-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
sparc64-softmmu.mak Split serial-isa into its own config option 2017-02-06 12:33:21 +11:00
sparc-bsd-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
sparc-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
sparc-softmmu.mak Allow ISA bus to be configured out 2017-02-06 12:33:21 +11:00
tilegx-linux-user.mak target-tilegx: Add TILE-Gx building files 2015-09-15 07:45:32 -07:00
tricore-softmmu.mak target-tricore: Add initialization for translation and activate target 2014-09-01 14:49:20 +01:00
unicore32-softmmu.mak Allow ISA bus to be configured out 2017-02-06 12:33:21 +11:00
usb.mak hw/usb: Include USB files only if necessary 2015-03-18 11:50:47 +01:00
x86_64-bsd-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
x86_64-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
x86_64-softmmu.mak ACPI: Add Virtual Machine Generation ID support 2017-03-02 07:14:27 +02:00
xtensa-softmmu.mak xtensa_lx60: add FLASH support 2011-11-02 05:05:52 +04:00
xtensaeb-softmmu.mak xtensa_lx60: add FLASH support 2011-11-02 05:05:52 +04:00