LLVM/Clang, supports runtime checks for forward-edge Control-Flow
Integrity (CFI).
CFI on indirect function calls (cfi-icall) ensures that, in indirect
function calls, the function called is of the right signature for the
pointer type defined at compile time.
For this check to work, the code must always respect the function
signature when using function pointer, the function must be defined
at compile time, and be compiled with link-time optimization.
This rules out, for example, shared libraries that are dynamically loaded
(given that functions are not known at compile time), and code that is
dynamically generated at run-time.
This patch:
1) Introduces the CONFIG_CFI flag to support cfi in QEMU
2) Introduces a decorator to allow the definition of "sensitive"
functions, where a non-instrumented function may be called at runtime
through a pointer. The decorator will take care of disabling cfi-icall
checks on such functions, when cfi is enabled.
3) Marks functions currently in QEMU that exhibit such behavior,
in particular:
- The function in TCG that calls pre-compiled TBs
- The function in TCI that interprets instructions
- Functions in the plugin infrastructures that jump to callbacks
- Functions in util that directly call a signal handler
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org
Message-Id: <20201204230615.2392-3-dbuono@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QString supports modifying its string, but it's quite limited: you can
only append. The remaining callers use it for building an initial
string, never for modifying it later.
Change keyval_parse_one() to do build the initial string with GString.
This is another step towards making QString immutable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-19-armbru@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A QemuOptsList can be of one of two kinds: either it is pre-validated, or
it accepts any key and validation happens somewhere else (typically in
a Visitor or against a list of QOM properties). opts_accepts_any
returns true if a QemuOpts instance was created from a QemuOptsList of
the latter kind, but there is no function to do the check on a QemuOptsList.
Since this property comes from the QemuOptsList and almost all callers of
opts_accepts_any use opts->list anyway, modify the function to accept
QemuOptsList.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use strcspn to find an equal or comma value, and pass the result directly
to get_opt_name to avoid another strchr.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_opts_set is used to create default network backends and to
parse sugar options -kernel, -initrd, -append, -bios and -dtb.
These are very different uses:
I would *expect* a function named qemu_opts_set to set an option in a
merge-lists QemuOptsList, such as -kernel, and possibly to set an option
in a non-merge-lists QemuOptsList with non-NULL id, similar to -set.
However, it wouldn't *work* to use qemu_opts_set for the latter
because qemu_opts_set uses fail_if_exists==1. So, for non-merge-lists
QemuOptsList and non-NULL id, the semantics of qemu_opts_set (fail if the
(QemuOptsList, id) pair already exists) are debatable.
On the other hand, I would not expect qemu_opts_set to create a
non-merge-lists QemuOpts with a single option; which it does, though.
For this case of non-merge-lists QemuOptsList and NULL id, qemu_opts_set
hardly adds value over qemu_opts_parse. It does skip some parsing and
unescaping, but that's not needed when creating default network
backends.
So qemu_opts_set has warty behavior for non-merge-lists QemuOptsList
if id is non-NULL, and it's mostly pointless if id is NULL. My
solution to keeping the API as simple as possible is to limit
qemu_opts_set to merge-lists QemuOptsList. For them, it's useful (we
don't want comma-unescaping for -kernel) *and* has sane semantics.
Network backend creation is switched to qemu_opts_parse.
qemu_opts_set is now only used on merge-lists QemuOptsList... except
in the testcase, which is changed to use a merge-list QemuOptsList.
With this change we can also remove the id parameter. With the
parameter always NULL, we know that qemu_opts_create cannot fail
and can pass &error_abort to it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:
contrib/libvhost-user/libvhost-user-glib.h
contrib/libvhost-user/libvhost-user.c
contrib/libvhost-user/libvhost-user.h
contrib/plugins/hotblocks.c
contrib/plugins/hotpages.c
contrib/plugins/howvec.c
contrib/plugins/lockstep.c
linux-user/mips64/cpu_loop.c
linux-user/mips64/signal.c
linux-user/sparc64/cpu_loop.c
linux-user/sparc64/signal.c
linux-user/x86_64/cpu_loop.c
linux-user/x86_64/signal.c
target/s390x/gen-features.c
tests/fp/platform.h
tests/migration/s390x/a-b-bios.c
tests/plugin/bb.c
tests/plugin/empty.c
tests/plugin/insn.c
tests/plugin/mem.c
tests/test-rcu-simpleq.c
tests/test-rcu-slist.c
tests/test-rcu-tailq.c
tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest/BiosTablesTest.c
contrib/plugins/, tests/plugin/, and tests/test-rcu-slist.c appear not
to include osdep.h intentionally. The remaining reverts are the same
as in commit bbfff19688.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113061216.2483385-1-armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Fix Coverity CID 1435957: Memory - illegal accesses (OVERRUN):
>>> Overrunning array "suffixes" of 7 8-byte elements at element
index 7 (byte offset 63) using index "idx" (which evaluates to 7).
Note, the biggest input value freq_to_str() can accept is UINT64_MAX,
which is ~18.446 EHz, less than 1000 EHz.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20201101215755.2021421-1-f4bug@amsat.org
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, when using "nvme://" for a block device, like
-drive file=nvme://0000:01:00.0/1,if=none,id=drive0 \
-device virtio-blk,drive=drive0 \
VFIO may pin all guest memory, and discarding of RAM no longer works as
expected. I was able to reproduce this easily with my
01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd
NVMe SSD Controller SM981/PM981/PM983
Similar to common VFIO, we have to disable it, making sure that:
a) virtio-balloon won't discard any memory ("silently disabled")
b) virtio-mem and nvme:// run mutually exclusive
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20201116105947.9194-1-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
This patch contains all the files, whose maintainer I could not get
from ‘get_maintainer.pl’ script.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Adapted exec.c and qdev-monitor.c to new location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023123624.19891-1-chetan4windows@gmail.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Lots of fixes all over the place.
virtio-mem and virtio-iommu patches are kind of fixes but
it seems better to just make them behave sanely than
try to educate users about the limitations ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl+i9YMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpySQH/Ru/sxB9PncR1HsqSf0HC0tt/EMKgyZTXEwQ
FITcjkCvBDS98a1VUvvZbjzTEDEZNnoUv94MjdLeBoptJ7GtK6nPoI6Ke0p1Zqbe
mlY2BCb0FpN8FE+mthjAI03mhw6o8Qo/OPtyISQzUxCVVqUHL5TRAVAQdeidoK8n
RBQ4WogwM/h7wI0d9GGgSxAON8IRQnBYImtzJieBb6zeScwKVFTWI1tqBdOyFN0/
AhzQiNZuhZ7a1XGJIsxmWB1NK2kcXNJuOF0ANh4coIHR0JzmH3xRy+Jnf5e3dYsw
LI23DUZPSTJJXAwKPucyTG7RTX8F55N9DVHC9KDRD6Ntq1oreJ4=
=pcbN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,vhost,virtio: fixes
Lots of fixes all over the place.
virtio-mem and virtio-iommu patches are kind of fixes but
it seems better to just make them behave sanely than
try to educate users about the limitations ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 04 Nov 2020 18:40:03 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (31 commits)
contrib/vhost-user-blk: fix get_config() information leak
block/export: fix vhost-user-blk get_config() information leak
block/export: make vhost-user-blk config space little-endian
configure: introduce --enable-vhost-user-blk-server
libvhost-user: follow QEMU comment style
vhost-blk: set features before setting inflight feature
Revert "vhost-blk: set features before setting inflight feature"
net: Add vhost-vdpa in show_netdevs()
vhost-vdpa: Add qemu_close in vhost_vdpa_cleanup
vfio: Don't issue full 2^64 unmap
virtio-iommu: Set supported page size mask
vfio: Set IOMMU page size as per host supported page size
memory: Add interface to set iommu page size mask
virtio-iommu: Add notify_flag_changed() memory region callback
virtio-iommu: Add replay() memory region callback
virtio-iommu: Call memory notifiers in attach/detach
virtio-iommu: Add memory notifiers for map/unmap
virtio-iommu: Store memory region in endpoint struct
virtio-iommu: Fix virtio_iommu_mr()
hw/smbios: Fix leaked fd in save_opt_one() error path
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
OptsVisitor, StringInputVisitor and the keyval visitor have
three different ideas of how a human could write the value of
a boolean option. Pay homage to the backwards-compatibility
gods and make the new common helper accept all four sets (on/off,
true/false, y/n and yes/no), but remove case-insensitivity.
Since OptsVisitor is supposed to match qemu-options, adjust
it as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201103161339.447118-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The assert() was added in commit b681a1c73e ("block: Repair the
throttling code."), when the qemu_co_queue_do_restart() function
required to be running in a coroutine. It was later made unnecessary in
commit a9d9235567 ("coroutine-lock: reschedule coroutine on the
AioContext it was running on").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201027133602.3038018-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make it possible to compile out the vhost-user-blk server. It is enabled
by default on Linux.
Note that vhost-user-server.c depends on libvhost-user, which requires
CONFIG_LINUX. The CONFIG_VHOST_USER dependency was erroneous since that
option controls vhost-user frontends (previously known as "master") and
not device backends (previously known as "slave").
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201027173528.213464-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
mmap(2) states:
'offset' must be a multiple of the page size as returned
by sysconf(_SC_PAGE_SIZE).
Add an assertion to be sure we don't break this contract.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201103020733.2303148-8-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
The QEMU_VFIO_DEBUG definition is only modifiable at build-time.
Trace events can be enabled at run-time. As we prefer the latter,
convert qemu_vfio_dump_mappings() to use trace events instead
of fprintf().
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201103020733.2303148-7-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
For debugging purpose, trace where DMA regions are mapped.
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201103020733.2303148-6-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
For debugging purpose, trace where a BAR is mapped.
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201103020733.2303148-5-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
For debug purpose, trace BAR regions info.
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201103020733.2303148-4-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
We sometime get kernel panic with some devices on Aarch64
hosts. Alex Williamson suggests it might be broken PCIe
root complex. Add trace event to record the latest I/O
access before crashing. In case, assert our accesses are
aligned.
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201103020733.2303148-3-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Change the confuse "VFIO IOMMU check failed" error message by
the explicit "VFIO IOMMU Type1 is not supported" once.
Example on POWER:
$ qemu-system-ppc64 -drive if=none,id=nvme0,file=nvme://0001:01:00.0/1,format=raw
qemu-system-ppc64: -drive if=none,id=nvme0,file=nvme://0001:01:00.0/1,format=raw: VFIO IOMMU Type1 is not supported
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201103020733.2303148-2-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Commit 9ce44e2ce2 "qmp: Move dispatcher to a coroutine" modified
aio_poll() in util/aio-posix.c to avoid an assertion failure. This
change is missing in util/aio-win32.c.
Apply the changes to util/aio-posix.c to util/aio-win32.c too.
This fixes an assertion failure on Windows whenever QEMU exits.
$ ./qemu-system-x86_64.exe -machine pc,accel=tcg -display gtk
**
ERROR:../qemu/util/aio-win32.c:337:aio_poll: assertion failed:
(in_aio_context_home_thread(ctx))
Bail out! ERROR:../qemu/util/aio-win32.c:337:aio_poll: assertion
failed: (in_aio_context_home_thread(ctx))
Fixes: 9ce44e2ce2 ("qmp: Move dispatcher to a coroutine")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20201021064033.8600-1-vr_qemu@t-online.de>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Memory returned by get_relocated_path must be freed with
free or g_free depending on the path that the function
took; Coverity takes exception to this practice. The
fix lets caller use g_free as is standard in QEMU.
While at it, mention the requirements on the caller in
the doc comment.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The abstract socket namespace is a non-portable Linux extension. An
attempt to use it elsewhere should fail with ENOENT (the abstract
address looks like a "" pathname, which does not resolve). We report
this failure like
Failed to connect socket abc: No such file or directory
Tolerable, although ENOTSUP would be better.
However, introspection lies: it has @abstract regardless of host
support. Easy enough to fix: since Linux provides them since 2.2,
'if': 'defined(CONFIG_LINUX)' should do.
The above failure becomes
Parameter 'backend.data.addr.data.abstract' is unexpected
I consider this an improvement.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
unix_listen_saddr() replaces empty @path by unique value. It obtains
the value by creating and deleting a unique temporary file with
mkstemp(). This is racy, as the comment explains. It's also entirely
undocumented as far as I can tell. Goes back to commit d247d25f18
"sockets: helper functions for qemu (Gerd Hoffman)", v0.10.0.
Since abstract socket addresses have no connection with filesystem
pathnames, making them up with mkstemp() seems inappropriate. Bypass
the replacement of empty @path.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 776b97d360 "qemu-sockets: add abstract UNIX domain socket
support" neglected to update socket_sockaddr_to_address_unix(). The
function returns a non-abstract socket address for abstract
sockets (wrong) with a null @path (also wrong; a non-optional QAPI str
member must never be null).
The null @path is due to confused code going back all the way to
commit 17c55decec "sockets: add helpers for creating SocketAddress
from a socket".
Add the required special case, and simplify the confused code.
Fixes: 776b97d360
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
An optional bool member of a QAPI struct can be false, true, or absent.
The previous commit demonstrated that socket_listen() and
socket_connect() are broken for absent @tight, and indeed QMP chardev-
add also defaults absent member @tight to false instead of true.
In C, QAPI members are represented by two fields, has_MEMBER and MEMBER.
We have:
has_MEMBER MEMBER
false true false
true true true
absent false false/ignore
When has_MEMBER is false, MEMBER should be set to false on write, and
ignored on read.
For QMP, the QAPI visitors handle absent @tight by setting both
@has_tight and @tight to false. unix_listen_saddr() and
unix_connect_saddr() however use @tight only, disregarding @has_tight.
This is wrong and means that absent @tight defaults to false whereas it
should default to true.
The same is true for @has_abstract, though @abstract defaults to
false and therefore has the same behavior for all of QMP, HMP and CLI.
Fix unix_listen_saddr() and unix_connect_saddr() to check
@has_abstract/@has_tight, and to default absent @tight to true.
However, this is only half of the story. HMP chardev-add and CLI
-chardev so far correctly defaulted @tight to true, but defaults to
false again with the above fix for HMP and CLI. In fact, the "tight"
and "abstract" options now break completely.
Digging deeper, we find that qemu_chr_parse_socket() also ignores
@has_tight, leaving it false when it sets @tight. That is also wrong,
but the two wrongs cancelled out. Fix qemu_chr_parse_socket() to set
@has_tight and @has_abstract; writing testcases for HMP and CLI is left
for another day.
Fixes: 776b97d360
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reporting "Failed to connect socket" is essentially useless for a user
attempting to diagnose failure. It needs to include the target address
details. Similarly when failing to create a socket we should include the
socket family info, so the user understands what particular feature was
missing in their kernel build (IPv6, VSock in particular).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We want missing symbols fail module load right away instead of having
qemu abort later on in case lazy binding fails. Can happen -- for
example -- when trying to load a module for a pci device
(virtio-gpu-pci) into a qemu without pci support (qemu-system-avr).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201028054944.5772-1-kraxel@redhat.com
Build virtio-gpu vga devices modular. Must be a separate module because
not all qemu softmmu variants come with VGA support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201023064618.21409-3-kraxel@redhat.com
Build virtio-gpu pci devices modular. Must be a separate module because
not all qemu softmmu variants come with PCI support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201023064618.21409-2-kraxel@redhat.com
With upstream commit#ea1edcd7da1a "vl: relocate paths to data
directories", the data dir logic was unified between POSIX &
Win32. That patch moved to using 'get_relocated_path()', to
find the data dir. There is a latent bug in get_relocated_path
which can cause it to spin indefinitely, when the bind dir is
the same as the passed in dir (in this case, it was the data
dir).
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB08802BF242C429A15DDB32ACC01B0@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't compile contrib/libvhost-user/libvhost-user.c again. Instead build
the static library once and then reuse it throughout QEMU.
Also switch from CONFIG_LINUX to CONFIG_VHOST_USER, which is what the
vhost-user tools (vhost-user-gpu, etc) do.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-14-stefanha@redhat.com
[Added CONFIG_LINUX again because libvhost-user doesn't build on macOS.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Headers used by other subsystems are located in include/. Also add the
vhost-user-server and vhost-user-blk-server headers to MAINTAINERS.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-13-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the new QAPI block exports API instead of defining our own QOM
objects.
This is a large change because the lifecycle of VuBlockDev needs to
follow BlockExportDriver. QOM properties are replaced by QAPI options
objects.
VuBlockDev is renamed VuBlkExport and contains a BlockExport field.
Several fields can be dropped since BlockExport already has equivalents.
The file names and meson build integration will be adjusted in a future
patch. libvhost-user should probably be built as a static library that
is linked into QEMU instead of as a .c file that results in duplicate
compilation.
The new command-line syntax is:
$ qemu-storage-daemon \
--blockdev file,node-name=drive0,filename=test.img \
--export vhost-user-blk,node-name=drive0,id=export0,unix-socket=/tmp/vhost-user-blk.sock
Note that unix-socket is optional because we may wish to accept chardevs
too in the future.
Markus noted that supported address families are not explicit in the
QAPI schema. It is unlikely that support for more address families will
be added since file descriptor passing is required and few address
families support it. If a new address family needs to be added, then the
QAPI 'features' syntax can be used to advertize them.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20200924151549.913737-12-stefanha@redhat.com
[Skip test on big-endian host architectures because this device doesn't
support them yet (as already mentioned in a code comment).
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The vu_client_trip() coroutine is leaked during AioContext switching. It
is also unsafe to destroy the vu_dev in panic_cb() since its callers
still access it in some cases.
Rework the lifecycle to solve these safety issues.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-10-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Unexpected EOF is an error that must be reported.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-9-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
fds[] is leaked when qio_channel_readv_full() fails.
Use vmsg->fds[] instead of keeping a local fds[] array. Then we can
reuse goto fail to clean up fds. vmsg->fd_num must be zeroed before the
loop to make this safe.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-8-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The device panic notifier callback is not used. Drop it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Explicitly deleting watches is not necessary since libvhost-user calls
remove_watch() during vu_deinit(). Add an assertion to check this
though.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We already have access to the value with the correct type (ioc and sioc
are the same QIOChannel).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move the constants from hw/core/qdev-properties.c to
util/block-helpers.h so that knowledge of the min/max values is
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20200918080912.321299-5-coiby.xu@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sharing QEMU devices via vhost-user protocol.
Only one vhost-user client can connect to the server one time.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200918080912.321299-4-coiby.xu@gmail.com
[Fixed size_t %lu -> %zu format string compiler error.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Removes opengl dependency from core qemu. The number of shared
libraries for qemu-system-x86_64 goes down from 66 to 60 on my system.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-15-kraxel@redhat.com
Allow modules depending on other modules.
module_load_file() gets the option to export symbols (by not adding the
G_MODULE_BIND_LOCAL flag).
module_load_one() will check the module dependency list to figure (a)
whenever are other modules must be loaded first, or (b) the module
should export the symbols.
The dependencies are specificed as static list in the source code for
now as I expect the list will stay small.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-11-kraxel@redhat.com
Introduce freq_to_str() to convert frequency values in human
friendly units using the SI units for Hertz.
Suggested-by: Luc Michel <luc@lmichel.fr>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-Id: <20201012095804.3335117-2-f4bug@amsat.org>
This adds a special meaning for 'help' and '?' as options to the keyval
parser. Instead of being an error (because of a missing value) or a
value for an implied key, they now request help, which is a new boolean
output of the parser in addition to the QDict.
A new parameter 'p_help' is added to keyval_parse() that contains on
return whether help was requested. If NULL is passed, requesting help
results in an error and all other cases work like before.
Turning previous error cases into help is a compatible extension. The
behaviour potentially changes for implied keys: They could previously
get 'help' as their value, which is now interpreted as requesting help.
This is not a problem in practice because 'help' and '?' are not a valid
values for the implied key of any option parsed with keyval_parse():
* audiodev: union Audiodev, implied key "driver" is enum AudiodevDriver,
"help" and "?" are not among its values
* display: union DisplayOptions, implied key "type" is enum
DisplayType, "help" and "?" are not among its values
* blockdev: union BlockdevOptions, implied key "driver is enum
BlockdevDriver, "help" and "?" are not among its values
* export: union BlockExport, implied key "type" is enum BlockExportType,
"help" and "?" are not among its values
* monitor: struct MonitorOptions, implied key "mode" is enum MonitorMode,
"help" and "?" are not among its values
* nbd-server: struct NbdServerOptions, no implied key.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201011073505.1185335-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The previous commit demonstrated documentation and code disagree on
parsing of ',' in the value of an implied key. Fix the code to match
the documentation.
This breaks uses of keyval_parse() that pass an implied key and accept
a value containing ','. None of the existing uses does:
* audiodev: implied key "driver" is enum AudiodevDriver, none of the
values contains ','
* display: implied key "type" is enum DisplayType, none of the values
contains ','
* blockdev: implied key "driver is enum BlockdevDriver, none of the
values contains ','
* export: implied key "type" is enum BlockExportType, none of the
values contains ','
* monitor: implied key "mode" is enum MonitorMode, none of the values
contains ','
* nbd-server: no implied key.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201011073505.1185335-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The grammar has a few issues:
* key-fragment = / [^=,.]* /
Prose restricts key fragments: they "must be valid QAPI names or
consist only of decimal digits". Technically, '' consists only of
decimal digits. The code rejects that. Fix the grammar.
* val = { / [^,]* / | ',,' }
Use + instead of *. Accepts the same language.
* val-no-key = / [^=,]* /
The code rejects an empty value. Fix the grammar.
* Section "Additional syntax for use with an implied key" is
confusing. Rewrite it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201011073505.1185335-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add mayfail bool parameter to module loading functions. Set it to true
for module_load_qom_all() because device modules might not load into all
system emulation variants. qemu-system-s390x for example will not load
qxl because it lacks vga support. Makes "make check" less chatty.
Drop module_loaded_qom_all check in module_load_qom_one to make sure we
see errors for explicit load requests, i.e. module_load_qom_one("qxl")
failing will log an error no matter whenever module_load_qom_all() was
called before or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200923091217.22662-1-kraxel@redhat.com
We remove the CONFIG_LOCALTIME_R detection option in configure, and move the check
existence of gmtime_r from configure into C header and source directly by using macro
`_POSIX_THREAD_SAFE_FUNCTIONS`.
Before this patch, the configure script are always assume the compiler doesn't define
_POSIX_C_SOURCE macro at all, but that's not true, because thirdparty library such
as ncursesw may define -D_POSIX_C_SOURCE in it's pkg-config file. And that C Flags will
added -D_POSIX_C_SOURCE into each QEMU_CFLAGS. And that's causing the following compiling error:
n file included from C:/work/xemu/qemu/include/qemu/osdep.h:119,
from ../softmmu/main.c:25:
C:/work/xemu/qemu/include/sysemu/os-win32.h:53:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls]
53 | struct tm *gmtime_r(const time_t *timep, struct tm *result);
| ^~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:94,
from ../softmmu/main.c:25:
C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/time.h:284:36: note: previous definition of 'gmtime_r' was here
284 | __forceinline struct tm *__CRTDECL gmtime_r(const time_t *_Time, struct tm *_Tm) {
| ^~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:119,
from ../softmmu/main.c:25:
C:/work/xemu/qemu/include/sysemu/os-win32.h:55:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls]
55 | struct tm *localtime_r(const time_t *timep, struct tm *result);
| ^~~~~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:94,
from ../softmmu/main.c:25:
C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/time.h:281:36: note: previous definition of 'localtime_r' was here
281 | __forceinline struct tm *__CRTDECL localtime_r(const time_t *_Time, struct tm *_Tm) {
| ^~~~~~~~~~~
Compiling C object libcommon.fa.p/hw_gpio_zaurus.c.obj
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:119,
from ../hw/i2c/smbus_slave.c:16:
C:/work/xemu/qemu/include/sysemu/os-win32.h:53:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls]
53 | struct tm *gmtime_r(const time_t *timep, struct tm *result);
| ^~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:94,
from ../hw/i2c/smbus_slave.c:16:
C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/time.h:284:36: note: previous definition of 'gmtime_r' was here
284 | __forceinline struct tm *__CRTDECL gmtime_r(const time_t *_Time, struct tm *_Tm) {
| ^~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:119,
from ../hw/i2c/smbus_slave.c:16:
C:/work/xemu/qemu/include/sysemu/os-win32.h:55:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls]
55 | struct tm *localtime_r(const time_t *timep, struct tm *result);
| ^~~~~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:94,
from ../hw/i2c/smbus_slave.c:16:
C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/time.h:281:36: note: previous definition of 'localtime_r' was here
281 | __forceinline struct tm *__CRTDECL localtime_r(const time_t *_Time, struct tm *_Tm) {
| ^~~~~~~~~~~
Compiling C object libcommon.fa.p/hw_dma_xilinx_axidma.c.obj
After this patch, whenever ncursesw or other thirdparty libraries tried to define or not
define _POSIX_C_SOURCE, the source will building properly. Because now, we don't make any
assumption if _POSIX_C_SOURCE are defined. We solely relied on if the macro `_POSIX_THREAD_SAFE_FUNCTIONS`
are defined in msys2/mingw header.
The _POSIX_THREAD_SAFE_FUNCTIONS are defined in mingw header like this:
```
#if defined(_POSIX_C_SOURCE) && !defined(_POSIX_THREAD_SAFE_FUNCTIONS)
#define _POSIX_THREAD_SAFE_FUNCTIONS 200112L
#endif
#ifdef _POSIX_THREAD_SAFE_FUNCTIONS
__forceinline struct tm *__CRTDECL localtime_r(const time_t *_Time, struct tm *_Tm) {
return localtime_s(_Tm, _Time) ? NULL : _Tm;
}
__forceinline struct tm *__CRTDECL gmtime_r(const time_t *_Time, struct tm *_Tm) {
return gmtime_s(_Tm, _Time) ? NULL : _Tm;
}
__forceinline char *__CRTDECL ctime_r(const time_t *_Time, char *_Str) {
return ctime_s(_Str, 0x7fffffff, _Time) ? NULL : _Str;
}
__forceinline char *__CRTDECL asctime_r(const struct tm *_Tm, char * _Str) {
return asctime_s(_Str, 0x7fffffff, _Tm) ? NULL : _Str;
}
#endif
```
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20201012234348.1427-5-luoyonggang@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a function that can be used to move the currently running coroutine
to a different AioContext (and therefore potentially a different
thread).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201005155855.256490-12-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This moves the QMP dispatcher to a coroutine and runs all QMP command
handlers that declare 'coroutine': true in coroutine context so they
can avoid blocking the main loop while doing I/O or waiting for other
events.
For commands that are not declared safe to run in a coroutine, the
dispatcher drops out of coroutine context by calling the QMP command
handler from a bottom half.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201005155855.256490-10-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The new interface starts unused, will start being used by the
next patches.
It provides methods for each accelerator to start a vcpu, kick a vcpu,
synchronize state, get cpu virtual clock and elapsed ticks.
In qemu_wait_io_event, make it clear that APC is used only for HAX
on Windows.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
refactoring of cpus.c continues with cpu timer state extraction.
cpu-timers: responsible for the softmmu cpu timers state,
including cpu clocks and ticks.
icount: counts the TCG instructions executed. As such it is specific to
the TCG accelerator. Therefore, it is built only under CONFIG_TCG.
One complication is due to qtest, which uses an icount field to warp time
as part of qtest (qtest_clock_warp).
In order to solve this problem, provide a separate counter for qtest.
This requires fixing assumptions scattered in the code that
qtest_enabled() implies icount_enabled(), checking each specific case.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[remove redundant initialization with qemu_spice_init]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[fix lingering calls to icount_get]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce the qemu_vfio_find_fixed/temp_iova helpers which
respectively allocate IOVAs from the bottom/top parts of the
usable IOVA range, without picking within host IOVA reserved
windows. The allocation remains basic: if the size is too big
for the remaining of the current usable IOVA range, we jump
to the next one, leaving a hole in the address map.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20200929085550.30926-3-eric.auger@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The IOVA allocator currently ignores host reserved regions.
As a result some chosen IOVAs may collide with some of them,
resulting in VFIO MAP_DMA errors later on. This happens on ARM
where the MSI reserved window quickly is encountered:
[0x8000000, 0x8100000]. since 5.4 kernel, VFIO returns the usable
IOVA regions. So let's enumerate them in the prospect to avoid
them, later on.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20200929085550.30926-2-eric.auger@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Pages are currently mapped READ/WRITE. To be able to use different
protections, add a new argument to qemu_vfio_pci_map_bar().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200922083821.578519-2-philmd@redhat.com>
Add the function that will compute a relocated version of the
directories in CONFIG_QEMU_*DIR and CONFIG_QEMU_*PATH.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the exec_dir cannot be retrieved, just assume it's the installation
directory that was specified at configure time. This makes it simpler
to reason about what the callers will do if they get back an empty
path.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just return the directory without requiring the caller to free it.
This also removes a bogus check for NULL in os_find_datadir and
module_load_one; g_strdup of a static variable cannot return NULL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dumping one line of hexadecimal/ASCII from a buffer is often needed.
Move this part from qemu_hexdump() and use it
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200925091055.186023-2-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
npfd keeps track of how many pollfds are currently being monitored. It
must be reset to 0 when fdmon_poll_wait() returns.
When npfd reaches a treshold we switch to fdmon-epoll because it scales
better.
This patch resets npfd in the case where we switch to fdmon-epoll.
Forgetting to do so results in the following assertion failure:
util/fdmon-poll.c:65: fdmon_poll_wait: Assertion `npfd == 0' failed.
Fixes: 1f050a4690 ("aio-posix: extract ppoll(2) and epoll(7) fd monitoring")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1869952
Message-Id: <20200915120339.702938-2-stefanha@redhat.com>
The iov_discard_front/back() operations are useful for parsing iovecs
but they modify the array elements. If the original array is needed
after parsing finishes there is currently no way to restore it.
Although g_memdup() can be used before performing destructive
iov_discard_front/back() operations, this is inefficient.
Introduce iov_discard_undo() to restore the array to the state prior to
an iov_discard_front/back() operation.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200917094455.822379-2-stefanha@redhat.com>
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the util folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-6-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* Some minor qtest improvements
* Fix the unit tests to work on MSYS2, too
* Enable building and testing on MSYS2 in the Cirrus-CI
* Build FreeBSD with one task again in the Cirrus-CI
-----BEGIN PGP SIGNATURE-----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=ErBp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-09-16' into staging
* Fix "readlink -f" problem in iotests on macOS (to fix the Cirrus-CI tests)
* Some minor qtest improvements
* Fix the unit tests to work on MSYS2, too
* Enable building and testing on MSYS2 in the Cirrus-CI
* Build FreeBSD with one task again in the Cirrus-CI
# gpg: Signature made Wed 16 Sep 2020 12:24:29 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-09-16: (24 commits)
cirrus: Building freebsd in a single shot
ci: Enable msys2 ci in cirrus
tests: Fixes test-qdev-global-props.c
tests: fix test-util-sockets.c
tests: Fixes test-io-channel-file by mask only owner file state mask bits
tests: fixes aio-win32 about aio_remove_fd_handler, get it consistence with aio-posix.c
tests: Fixes test-io-channel-socket.c tests under msys2/mingw
vmstate: Fixes test-vmstate.c on msys2/mingw
meson: remove empty else and duplicated gio deps
meson: Use -b to ignore CR vs. CR-LF issues on Windows
osdep: file locking functions are not available on Win32
tests: test-replication disable /replication/secondary/* on msys2/mingw.
tests: Fixes test-replication.c on msys2/mingw.
meson: disable crypto tests are empty under win32
meson: Disable test-char on msys2/mingw for fixing tests stuck
rcu: fixes test-logging.c by call drain_call_rcu before rmdir_full
tests: Convert g_free to g_autofree macro in test-logging.c
rcu: Implement drain_call_rcu
qga/commands-win32: Fix problem with redundant protype declaration
Simplify the .gitignore file
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A common error scenario is to tell QEMU to use O_DIRECT in combination
with a filesystem that doesn't support it. To aid users to diagnosing
their mistake we want to provide a clear error message when this happens.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qemu_open_old() works like open(): set errno and return -1 on failure.
It has even more failure modes, though. Reporting the error clearly
to users is basically impossible for many of them.
Our standard cure for "errno is too coarse" is the Error object.
Introduce two new helper methods:
int qemu_open(const char *name, int flags, Error **errp);
int qemu_create(const char *name, int flags, mode_t mode, Error **errp);
Note that with this design we no longer require or even accept the
O_CREAT flag. Avoiding overloading the two distinct operations
means we can avoid variable arguments which would prevent 'errp' from
being the last argument. It also gives us a guarantee that the 'mode' is
given when creating files, avoiding a latent security bug.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of relying on the limited information from errno, we can now
also provide detailed error messages to callers that ask for it.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This simple refactoring prepares for future patches. The variadic args
handling is split from the main bulk of the open logic.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We're going to have multiple callers to open() from qemu_open()
soon. Readability would thus benefit from having a helper for
dealing with O_CLOEXEC.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently code has to call monitor_fdset_get_fd, then dup
the return fd, and then add the duplicate FD back into the
fdset. This dance is overly verbose for the caller and
introduces extra failure modes which can be avoided by
folding all the logic into monitor_fdset_dup_fd_add and
removing monitor_fdset_get_fd entirely.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This will allow is to preserve the semantics of hmp_device_del,
that the device is deleted immediatly which was changed by previos
patch that delayed this to RCU callback
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200915121318.247-2-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Only build virtio-gpu-device modular (the code which actually depends on
the external virglrenderer library). virtio-gpu-pci and virtio-vga are
compiled into core qemu still.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200914134224.29769-7-kraxel@redhat.com
qemu_hexdump()'s pointer to the buffer and length of the
buffer are closely related arguments but are widely separated
in the argument list order (also, the format of <stdio.h>
function prototypes is usually to have the FILE* argument
coming first).
Reorder the arguments as "fp, prefix, buf, size" which is
more logical.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200822180950.1343963-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Most uses of qemu_hexdump() do not take an array of char
as input, forcing use of cast. Since we can use this
helper to dump any kind of buffer, use a pointer to void
argument instead.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200822180950.1343963-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of scripts/cleanup-trace-events.pl. Funnies
requiring manual post-processing:
* accel/tcg/cputlb.c trace points are in trace-events.
* block.c and blockdev.c trace points are in block/trace-events.
* hw/block/nvme.c uses the preprocessor to hide its trace point use
from cleanup-trace-events.pl.
* hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to
guard debug code.
* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.
* linux-user/trace-events abbreviates a tedious list of filenames to
*/signal.c.
* net/colo-compare and net/filter-rewriter.c use pseudo trace points
colo_compare_miscompare and colo_filter_rewriter_debug to guard
debug code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806141334.3646302-5-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The linker of MinGW sometimes runs into the following problem:
libqemuutil.a(util_main-loop.c.obj): In function `qemu_fd_register':
/builds/huth/qemu/build/../util/main-loop.c:331: multiple definition of
`qemu_fd_register'
libqemuutil.a(stubs_fd-register.c.obj):/builds/huth/qemu/stubs/fd-register.c:5:
first defined here
collect2: error: ld returned 1 exit status
/builds/huth/qemu/rules.mak:88: recipe for target 'tests/test-timed-average.exe'
failed
qemu_fd_register() is defined in util/main-loop.c for WIN32, so let's simply
move the stub also there in the #else part of the corresponding #ifndef
to fix this problem.
Message-Id: <20200903054503.425435-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some 'qemu_vfio_*' trace events sizes are displayed using
decimal notation, other using hexadecimal notation:
qemu_vfio_ram_block_added s 0xaaaaf2448d90 host 0xffff5bc00000 size 0x4000000
qemu_vfio_dma_map s 0xaaaaf2448d90 host 0xffff5bc00000 size 67108864 temporary 0 iova (nil)
qemu_vfio_find_mapping s 0xaaaaf2448d90 host 0xffff5bc00000
qemu_vfio_new_mapping s 0xaaaaf2448d90 host 0xffff5bc00000 size 67108864 index 4 iova 0x114000
qemu_vfio_do_mapping s 0xaaaaf2448d90 host 0xffff5bc00000 size 67108864 iova 0x114000
As it is hard to follow, unify using hexadecimal for all sizes:
qemu_vfio_ram_block_added s 0xaaaaf1c60d90 host 0xffff2bc00000 size 0x4000000
qemu_vfio_dma_map s 0xaaaaf1c60d90 host 0xffff2bc00000 size 0x4000000 temporary 0 iova (nil)
qemu_vfio_find_mapping s 0xaaaaf1c60d90 host 0xffff2bc00000
qemu_vfio_new_mapping s 0xaaaaf1c60d90 host 0xffff2bc00000 size 0x4000000 index 4 iova 0x114000
qemu_vfio_do_mapping s 0xaaaaf1c60d90 host 0xffff2bc00000 size 0x4000000 iova 0x114000
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200820171006.1140228-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Remove the second 'and' introduced in commit 418026ca43
("util: Introduce vfio helpers").
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200811151643.21293-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Remove the second 'and' introduced in commit e81f86790f ("qemu-timer:
avoid checkpoints for virtual clock timers in external subsystems").
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200811151643.21293-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
libqemuutil.a build fails with this error:
/usr/bin/ld: libqemuutil.a(util_fdmon-io_uring.c.o): in function `get_sqe':
qemu/build/../util/fdmon-io_uring.c:83: undefined reference to `io_uring_get_sqe'
/usr/bin/ld: qemu/build/../util/fdmon-io_uring.c:92: undefined reference to `io_uring_submit'
/usr/bin/ld: qemu/build/../util/fdmon-io_uring.c:96: undefined reference to `io_uring_get_sqe'
/usr/bin/ld: libqemuutil.a(util_fdmon-io_uring.c.o): in function `fdmon_io_uring_wait':
qemu/build/../util/fdmon-io_uring.c:289: undefined reference to `io_uring_submit_and_wait'
/usr/bin/ld: libqemuutil.a(util_fdmon-io_uring.c.o): in function `fdmon_io_uring_setup':
qemu/build/../util/fdmon-io_uring.c:328: undefined reference to `io_uring_queue_init'
/usr/bin/ld: libqemuutil.a(util_fdmon-io_uring.c.o): in function `fdmon_io_uring_destroy':
qemu/build/../util/fdmon-io_uring.c:343: undefined reference to `io_uring_queue_exit'
collect2: error: ld returned 1 exit status
This patch fix the issue adding 'linux_io_uring' dependency for
fdmon-io_uring.c
Fixes: a81df1b68b ("libqemuutil, qapi, trace: convert to meson")
Cc: pbonzini@redhat.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200821154853.94379-1-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the create-config logic to meson.build; create a
configuration_data object and let meson handle the
quoting and output.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The binaries move to the root directory, e.g. qemu-system-i386 or
qemu-arm. This requires changes to qtests, CI, etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This shows how to do some "computations" in meson.build using its array
and dictionary data structures, and also a basic usage of the sourceset
module for conditional compilation.
Notice the new "if have_system" part of util/meson.build, which fixes
a bug in the old build system was buggy: util/dbus.c was built even for
non-softmmu builds, but the dependency on -lgio was lost when the linking
was done through libqemuutil.a. Because all of its users required gio
otherwise, the bug was hidden. Meson instead propagates libqemuutil's
dependencies down to its users, and shows the problem.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Polling only monitors the ctx->notified field and does not need the
ctx->notifier EventNotifier to be signalled. Keep ctx->aio_notify_me
disabled while polling to avoid unnecessary EventNotifier syscalls.
This optimization improves virtio-blk 4KB random read performance by
18%. The following results are with an IOThread and the null-co block
driver:
Test IOPS Error
Before 244518.62 ± 1.20%
After 290706.11 ± 0.44%
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806131802.569478-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
aio_notify() does not set ctx->notified when called with
ctx->aio_notify_me disabled. Therefore aio_notify_me needs to be enabled
during polling.
This is suboptimal since expensive event_notifier_set(&ctx->notifier)
and event_notifier_test_and_clear(&ctx->notifier) calls are required
when ctx->aio_notify_me is enabled.
Change aio_notify() so that aio->notified is always set, regardless of
ctx->aio_notify_me. This will make polling cheaper since
ctx->aio_notify_me can remain disabled. Move the
event_notifier_test_and_clear() to the fd handler function (which is now
no longer an empty function so "dummy" has been dropped from its name).
The next patch takes advantage of this by optimizing polling in
util/aio-posix.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806131802.569478-3-stefanha@redhat.com
[Paolo Bonzini pointed out that the smp_wmb() in aio_notify_accept()
should be smp_wb() but the comment should be smp_wmb() instead of
smp_wb(). Fixed.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The event_notifier_*() prefix can be confused with the EventNotifier
APIs that are also called event_notifier_*().
Rename the functions to aio_context_notifier_*() to make it clear that
they relate to the AioContext::notifier field.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200806131802.569478-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Compile tested only.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20200724064509.331-6-alex.bennee@linaro.org>
This will be used in a future patch. For POSIX systems _SC_PHYS_PAGES
isn't standardised but at least appears in the man pages for
Open/FreeBSD. The result is advisory so any users of it shouldn't just
fail if we can't work it out.
The win32 stub currently returns 0 until someone with a Windows system
can develop and test a patch.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Message-Id: <20200724064509.331-5-alex.bennee@linaro.org>
Just return in case module_load_qom_one(NULL) is called.
vga_interface_available() can do that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200720100352.2477-3-kraxel@redhat.com>
Implement qemu_get_thread_id() for OpenBSD hosts, using
getthrid().
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Brad Smith <brad@comstyle.com>
Message-id: CA+XhMqxD6gQDBaj8tX0CMEj3si7qYKsM8u1km47e_-U7MC37Pg@mail.gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tidied up commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_set_nonblock() checks that the file descriptor can be used and, if
not, crashes QEMU. An assert() is used for that. The use of assert() is
used to detect programming error and the coredump will allow to debug
the problem.
But in the case of the tap device, this assert() can be triggered by
a misconfiguration by the user. At startup, it's not a real problem, but it
can also happen during the hot-plug of a new device, and here it's a
problem because we can crash a perfectly healthy system.
For instance:
# ip link add link virbr0 name macvtap0 type macvtap mode bridge
# ip link set macvtap0 up
# TAP=/dev/tap$(ip -o link show macvtap0 | cut -d: -f1)
# qemu-system-x86_64 -machine q35 -device pcie-root-port,id=pcie-root-port-0 -monitor stdio 9<> $TAP
(qemu) netdev_add type=tap,id=hostnet0,vhost=on,fd=9
(qemu) device_add driver=virtio-net-pci,netdev=hostnet0,id=net0,bus=pcie-root-port-0
(qemu) device_del net0
(qemu) netdev_del hostnet0
(qemu) netdev_add type=tap,id=hostnet1,vhost=on,fd=9
qemu-system-x86_64: .../util/oslib-posix.c:247: qemu_set_nonblock: Assertion `f != -1' failed.
Aborted (core dumped)
To avoid that, add a function, qemu_try_set_nonblock(), that allows to report the
problem without crashing.
In the same way, we also update the function for vhostfd in net_init_tap_one() and
for fd in net_init_socket() (both descriptors are provided by the user and can
be wrong).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This function offers operating system agnostic way to fetch host
name. It is implemented for both POSIX-like and Windows systems.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Given this isn't perforance critical at all lets avoid the non-portable
d_type and use fstat instead to check whenever the file is a chardev.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reported-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-10-peter.maydell@linaro.org
Message-id: 20200701180302.14821-1-kraxel@redhat.com
[PMM: fixed comment style; tweaked subject line]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The qemu_init_exec_dir() function is inherently non-portable;
provide an implementation for Haiku hosts.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-9-peter.maydell@linaro.org
[PMM: Expanded commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
util/compatfd.c includes <sys/syscall.h> so that the CONFIG_SIGNALFD
code can use SYS_signalfd. Guard the #include with CONFIG_SIGNALFD
to avoid portability issues on hosts like Haiku which do not
provide that header file.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-8-peter.maydell@linaro.org
[PMM: Expanded commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Regularize our handling of <sys/signal.h>: currently we include it in
osdep.h, but only for OpenBSD, and we include it without an ifdef
guard in a couple of C files. This causes problems for Haiku, which
doesn't have that header.
Instead, check in configure whether sys/signal.h exists, and if it
does then always include it from osdep.h.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-5-peter.maydell@linaro.org
[PMM: Expanded commit message; rename to HAVE_SYS_SIGNAL_H]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of using an OS-specific ifdef test to select the "openpty()
is in pty.h" codepath, make configure check for the existence of
the header and use the new CONFIG_PTY instead.
This is necessary to build on Haiku, which also provides openpty()
via pty.h.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-3-peter.maydell@linaro.org
[PMM: Expanded commit message; rename to HAVE_PTY_H]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GCC supports "#pragma GCC diagnostic" since version 4.6, and
Clang seems to support it, too, since its early versions 3.x.
That means that our minimum required compiler versions all support
this pragma already and we can remove the test from configure and
all the related #ifdefs in the code.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200710045515.25986-1-thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- tests/vm support for aarch64 VMs
- tests/tcg better cross-compiler detection
- update docker tooling to support registries
- update docker support for xtensa
- gitlab build docker images and store in registry
- gitlab use docker images for builds
- a number of skipIf updates to support move
- linux-user MAP_FIXED_NOREPLACE fix
- qht-bench compiler tweaks
- configure fix for secret keyring
- tsan fiber annotation clean-up
- doc updates for mttcg/icount/gdbstub
- fix cirrus to use brew bash for iotests
- revert virtio-gpu breakage
- fix LC_ALL to avoid sorting changes in iotests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl8J0yoACgkQ+9DbCVqe
KkSzTAf/Vn+9TU8Qt7nZvl7W4tz7Sy5K8EJGwj2RXx6CWWWLiFbsXurIM8Krw5Vc
RmvUxwa359b+J0lQpfeNDHYm1nM8RZLFlkG0a5bl0I8sW0EcPjBRtwNaGKXh2p0u
u2RS2QAi6A9AvYT4ZREYlBM+o9WzbxCEQm4s8fr6WEJCQfxBnb5/bGiEjWR64e8C
j9Kvou+zAKfVizbQMtu+mwqjsoPtcS1b3vVcO7anhNuUsuaEKkS0dFWzWvw3lwJR
STIYnb8Y/eJ1yKr0hPH2qtWv3n6yhlYvYmpUCH6AwshGMUoeFEzR2VoWS6yZPGG6
na6XA3UW5R9AxIDfkCJ5ueeo8t9xMQ==
=HRWa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-110720-2' into staging
Testing and misc build updates:
- tests/vm support for aarch64 VMs
- tests/tcg better cross-compiler detection
- update docker tooling to support registries
- update docker support for xtensa
- gitlab build docker images and store in registry
- gitlab use docker images for builds
- a number of skipIf updates to support move
- linux-user MAP_FIXED_NOREPLACE fix
- qht-bench compiler tweaks
- configure fix for secret keyring
- tsan fiber annotation clean-up
- doc updates for mttcg/icount/gdbstub
- fix cirrus to use brew bash for iotests
- revert virtio-gpu breakage
- fix LC_ALL to avoid sorting changes in iotests
# gpg: Signature made Sat 11 Jul 2020 15:56:42 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-misc-110720-2: (50 commits)
iotests: Set LC_ALL=C for sort
Revert "vga: build virtio-gpu as module"
tests: fix "make check-qtest" for modular builds
.cirrus.yml: add bash to the brew packages
tests/docker: update toolchain set in debian-xtensa-cross
tests/docker: fall back more gracefully when pull fails
docs: Add to gdbstub documentation the PhyMemMode
docs/devel: add some notes on tcg-icount for developers
docs/devel: convert and update MTTCG design document
tests/qht-bench: Adjust threshold computation
tests/qht-bench: Adjust testing rate by -1
travis.yml: Test also the other targets on s390x
shippable: pull images from registry instead of building
testing: add check-build target
containers.yml: build with docker.py tooling
gitlab: limit re-builds of the containers
tests: improve performance of device-introspect-test
gitlab: add avocado asset caching
gitlab: enable check-tcg for linux-user tests
linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_va
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 8d5a24c83d.
Compiling all virtio-gpu objects into a single module isn't a good plan
because the individual objects have different CONFIG_* dependencies.
Leads to module load failures on s390x due to vga support being
disabled, which in turn breaks '-device virtio-gpu-device' (flagged by
travis ci).
So back to the drawing board for modular virtio-gpu ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200710203652.9708-3-kraxel@redhat.com>
This is a cleanup patch to follow-up the patch which introduced TSAN.
This patch makes separate start_switch_fiber_ functions for TSAN and ASAN.
This does two things:
1. Unrelated ASAN and TSAN code is separate and each function only
has arguments that are actually needed.
2. The co->tsan_caller_fiber and co->tsan_co_fiber fields are only
access from within #ifdef CONFIG_TSAN.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200626170001.27017-1-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-5-alex.bennee@linaro.org>
This is followup patch to the one submitted back in Oct, 19
https://lists.gnu.org/archive/html/qemu-devel/2019-10/msg02102.html
My mistake here, I took my eyes of the mailing list after I got the
initial thumbs up. This patch follows up on Markus comments in the
above link.
Purpose of this patch:
We want to print guest name for errors, warnings and info messages. This
was the first of two patches the second being MCE errors targeting a VM
with guest name prepended. But in a large fleet we see many other
errors that disable a VM or crash it. In a large fleet and centralized
logging having the guest name enables identify of owner and customer.
Signed-off-by: Mario Smarduch <msmarduch@digitalocean.com>
Message-Id: <20200626201900.8876-1-msmarduch@digitalocean.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
See recent commit "error: Document Error API usage rules" for
rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-14-armbru@redhat.com>
opt_set() frees its argument @value on failure. Slightly unclean;
functions ideally do nothing on failure.
To tidy this up, move opt_create() from opt_set() into its callers,
along with the cleanup. Rename opt_set() to opt_validate(), noting
its similarity to qemu_opts_validate(). Drop redundant parameter
@opts; use opt->opts instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-13-armbru@redhat.com>
There is just one use so far. The next commit will add more.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-12-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-11-armbru@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200707160613.848843-10-armbru@redhat.com>
This is to make the next commit easier to review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200707160613.848843-9-armbru@redhat.com>
Convert uses like
opts = qemu_opts_create(..., &err);
if (err) {
...
}
to
opts = qemu_opts_create(..., errp);
if (!opts) {
...
}
Eliminate error_propagate() that are now unnecessary. Delete @err
that are now unused.
Note that we can't drop parallels_open()'s error_propagate() here. We
continue to execute it even in the converted case. It's a no-op then:
local_err is null.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200707160613.848843-8-armbru@redhat.com>
Add support for qom types provided by modules. For starters use a
manually maintained list which maps qom type to module and prefix.
Two load functions are added: One to load the module for a specific
type, and one to load all modules (needed for object/device lists as
printed by -- for example -- qemu -device help).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200624131045.14512-2-kraxel@redhat.com
Recent versions of Solaris (v11.4) now feature an openpty() function,
too, causing a build failure since we ship our own implementation of
openpty() for Solaris in util/qemu-openpty.c so far. Since there are
now both variants available in the wild, with and without this function
(and illumos is said to not have this function yet), let's introduce a
proper HAVE_OPENPTY define for this to fix the build failure.
Message-Id: <20200702143955.678-1-thuth@redhat.com>
Tested-by: Michele Denber <denber@mindspring.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Sometimes virtual timer callbacks depend on order
of virtual timer processing and warping of virtual clock.
Therefore every callback should be logged to make replay deterministic.
This patch creates a checkpoint before every virtual timer callback.
With these checkpoints virtual timers processing and clock warping
events order is completely deterministic.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
--
v2:
- remove mutex lock/unlock for virtual clock checkpoint since it is
not process any asynchronous events (commit ca9759c2a9)
- bump record/replay log file version
Message-Id: <159012932716.27256.8854065545365559921.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From d7f9d40777d1ed7c9450b0be4f957da2993dfc72 Mon Sep 17 00:00:00 2001
From: David Carlier <devnexen@gmail.com>
Date: Fri, 12 Jun 2020 09:39:17 +0100
Subject: [PATCH] util/getauxval: Porting to FreeBSD getauxval feature
FreeBSD has a similar API for auxiliary vector.
Signed-off-by: David Carlier <devnexen@gmail.com>
Message-Id: <CA+XhMqxTU6PUSQBpbA9VrS1QZfqgrCAKUCtUF-x2aF=fCMTDOw@mail.gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current implementation of LLVM's SafeStack is not compatible with
code that uses an alternate stack created with sigaltstack().
Since coroutine-sigaltstack relies on sigaltstack(), it is not
compatible with SafeStack. The resulting binary is incorrect, with
different coroutines sharing the same unsafe stack and producing
undefined behavior at runtime.
In the future LLVM may provide a SafeStack implementation compatible with
sigaltstack(). In the meantime, if SafeStack is desired, the coroutine
implementation from coroutine-ucontext should be used.
As a safety check, add a control in coroutine-sigaltstack to throw a
preprocessor #error if SafeStack is enabled and we are trying to
use coroutine-sigaltstack to implement coroutines.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-id: 20200529205122.714-3-dbuono@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
LLVM's SafeStack instrumentation does not yet support programs that make
use of the APIs in ucontext.h
With the current implementation of coroutine-ucontext, the resulting
binary is incorrect, with different coroutines sharing the same unsafe
stack and producing undefined behavior at runtime.
This fix allocates an additional unsafe stack area for each coroutine,
and sets the new unsafe stack pointer before calling swapcontext() in
qemu_coroutine_new.
This is the only place where the pointer needs to be manually updated,
since sigsetjmp/siglongjmp are already instrumented by LLVM to properly
support SafeStack.
The additional stack is then freed in qemu_coroutine_delete.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-id: 20200529205122.714-2-dbuono@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
From 3025a0ce3fdf7d3559fc35a52c659f635f5c750c Mon Sep 17 00:00:00 2001
From: David Carlier <devnexen@gmail.com>
Date: Tue, 26 May 2020 21:35:27 +0100
Subject: [PATCH] util/oslib-posix : qemu_init_exec_dir implementation for Mac
Using dyld API to get the full path of the current process.
Signed-off-by: David Carlier <devnexen@gmail.com>
Message-id: CA+XhMqxwC10XHVs4Z-JfE0-WLAU3ztDuU9QKVi31mjr59HWCxg@mail.gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows us to see the name of the thread in tsan
warning reports such as this:
Thread T7 'CPU 1/TCG' (tid=24317, running) created by main thread at:
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200609200738.445-12-robert.foley@linaro.org>
Message-Id: <20200612190237.30436-15-alex.bennee@linaro.org>
We tried running QEMU under tsan in 2016, but tsan's lack of support for
longjmp-based fibers was a blocker:
https://groups.google.com/forum/#!topic/thread-sanitizer/se0YuzfWazw
Fortunately, thread sanitizer gained fiber support in early 2019:
https://reviews.llvm.org/D54889
This patch brings tsan support upstream by importing the patch that annotated
QEMU's coroutines as tsan fibers in Android's QEMU fork:
https://android-review.googlesource.com/c/platform/external/qemu/+/844675
Tested with '--enable-tsan --cc=clang-9 --cxx=clang++-9 --disable-werror'
configure flags.
Signed-off-by: Lingfeng Yang <lfy@google.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[cota: minor modifications + configure changes]
Signed-off-by: Robert Foley <robert.foley@linaro.org>
[RF: configure changes, coroutine fix + minor modifications]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200609200738.445-2-robert.foley@linaro.org>
Message-Id: <20200612190237.30436-5-alex.bennee@linaro.org>
getpid is good enough in a mono thread context, however thr_self/_lwp_self
reflects the real current thread identifier from a given process.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Carlier <devnexen@gmail.com>
These objects are not required when configured with --disable-system.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-6-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
unix_listen/connect_saddr now support abstract address types
two aditional BOOL switches are introduced:
tight: whether to set @addrlen to the minimal string length,
or the maximum sun_path length. default is TRUE
abstract: whether we use abstract address. default is FALSE
cli example:
-monitor unix:/tmp/unix.socket,abstract,tight=off
OR
-chardev socket,path=/tmp/unix.socket,id=unix1,abstract,tight=on
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The glib event loop does not call fdmon_io_uring_wait() so fd handlers
waiting to be submitted build up in the list. There is no benefit is
using io_uring when the glib GSource is being used, so disable it
instead of implementing a more complex fix.
This fixes a memory leak where AioHandlers would build up and increasing
amounts of CPU time were spent iterating them in aio_pending(). The
symptom is that guests become slow when QEMU is built with io_uring
support.
Buglink: https://bugs.launchpad.net/qemu/+bug/1877716
Fixes: 73fd282e7b ("aio-posix: add io_uring fd monitoring implementation")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Message-id: 20200511183630.279750-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The io_uring file descriptor monitoring implementation has an internal
list of fd handlers that are pending submission to io_uring.
fdmon_io_uring_destroy() deletes all fd handlers on the list.
Don't delete fd handlers directly in fdmon_io_uring_destroy() for two
reasons:
1. This duplicates the aio-posix.c AioHandler deletion code and could
become outdated if the struct changes.
2. Only handlers with the FDMON_IO_URING_REMOVE flag set are safe to
remove. If the flag is not set then something still has a pointer to
the fd handler. Let aio-posix.c and its user worry about that. In
practice this isn't an issue because fdmon_io_uring_destroy() is only
called when shutting down so all users have removed their fd
handlers, but the next patch will need this!
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Message-id: 20200511183630.279750-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- reduce client-side fragmentation of NBD trim and status requests
- fix iotest 41 when run in deep tree
- fix socket activation in qemu-nbd
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAl6whTUACgkQp6FrSiUn
Q2r4nAf7BtGSFMkUu6nWYeq+Ggg+Xwmz2FLAzWTK/rccGDC44c9ETzOIbWEddo6X
FHpU07VXdLW1h2M7ox8lQVo0DZEFxTRBYTPtUtjB7izfkAs4CkYeElJsZAPAZKgU
GsKqa3RM6uXubsQaXXXjMFCGlYgqi1dVkmkgtPebt7evSe0ATlTfYfd0y9gb5f9C
cbHD3CVcGKQe4ZtNcSBpTzOvXJSrBZznyCyhBO2qmVXTynt/5Ygog+Ulq3DHZsPX
UkRkTPohKA0BhXuS7wD49danlzCLiTlvswr62fAncM1+AJTbmIa+apy3SwiOkwMh
Aawq5vDtaFV+HEBKbMC0QRhgtoEe1w==
=ExlI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2020-05-04' into staging
nbd patches for 2020-05-04
- reduce client-side fragmentation of NBD trim and status requests
- fix iotest 41 when run in deep tree
- fix socket activation in qemu-nbd
# gpg: Signature made Mon 04 May 2020 22:12:21 BST
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2020-05-04:
block/nbd-client: drop max_block restriction from discard
block/nbd-client: drop max_block restriction from block_status
iotests/041: Fix NBD socket path
tools: Fix use of fcntl(F_SETFD) during socket activation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
-----BEGIN PGP SIGNATURE-----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=ibgH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging
trivial patches (20200504)
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
# gpg: Signature made Mon 04 May 2020 16:45:18 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-5.1-pull-request:
hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning
hw/timer/stm32f2xx_timer: Remove dead assignment
hw/gpio/aspeed_gpio: Remove dead assignment
hw/isa/i82378: Remove dead assignment
hw/ide/sii3112: Remove dead assignment
hw/input/adb-kbd: Remove dead assignment
hw/i2c/pm_smbus: Remove dead assignment
blockdev: Remove dead assignment
block: Avoid dead assignment
Compress lines for immediate return
chardev: Add macOS to list of OSes that support -chardev serial
MAINTAINERS: Update Keith Busch's email address
elf_ops: Don't try to g_mapped_file_unref(NULL)
hw/mem/pc-dimm: Fix line over 80 characters warning
hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug()
MAINTAINERS: Mark the LatticeMico32 target as orphan
timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write()
display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32()
scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Blindly setting FD_CLOEXEC without a read-modify-write will
inadvertently clear any other intentionally-set bits, such as a
proposed new bit for designating a fd that must behave in 32-bit mode.
However, we cannot use our wrapper qemu_set_cloexec(), because that
wrapper intentionally abort()s on failure, whereas the probe here
intentionally tolerates failure to deal with incorrect socket
activation gracefully. Instead, fix the code to do the proper
read-modify-write.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200420175309.75894-3-eblake@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets
- replaced result with QEMU_LOCK_GUARD if all unlocks at function end
- replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end
Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Compress two lines into a single line if immediate return statement is found.
It also remove variables progress, val, data, ret and sock
as they are no longer needed.
Remove space between function "mixer_load" and '(' to fix the
checkpatch.pl error:-
ERROR: space prohibited between function name and open parenthesis '('
Done using following coccinelle script:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Simran Singhal <singhalsimran0@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200401165314.GA3213@simran-Inspiron-5558>
[lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-6-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qdict_iter() has just three uses and no test coverage. Replace by
qdict_first(), qdict_next() for more concise code and less type
punning.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
is_valid_option_list()'s purpose is ensuring qemu-img.c's can safely
join multiple parameter strings separated by ',' like this:
g_strdup_printf("%s,%s", params1, params2);
How it does that is anything but obvious. A close reading of the code
reveals that it fails exactly when its argument starts with ',' or
ends with an odd number of ','. Makes sense, actually, because when
the argument starts with ',', a separating ',' preceding it would get
escaped, and when it ends with an odd number of ',', a separating ','
following it would get escaped.
Move it to qemu-img.c and rewrite it the obvious way.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200415074927.19897-9-armbru@redhat.com>
When opts_parse() sets @invalidp to true, qemu_opts_parse_noisily()
uses has_help_option() to decide whether to print help. This parses
the input string a second time.
Easy to avoid: replace @invalidp by @help_wanted.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200415074927.19897-7-armbru@redhat.com>
has_help_option() uses its own parser. It's inconsistent with
qemu_opts_parse(), as demonstrated by test-qemu-opts case
/qemu-opts/has_help_option. Fix by reusing the common parser.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415074927.19897-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200415074927.19897-4-armbru@redhat.com>
The next commits will put it to use.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200415074927.19897-3-armbru@redhat.com>
With the module upgrades code change, the statically sized dirs array
can now overflow. Increase it's size by one, according to the new
maximum possible usage.
Fixes: bd83c861c0 ("modules: load modules from versioned /var/run dir")
Signed-off-by: Bruce Rogers <brogers@suse.com>
Message-Id: <20200411010746.472295-1-brogers@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In touch_all_pages, if the mutex is not taken around qemu_cond_broadcast,
qemu_cond_broadcast may be called before all touch page threads enter
qemu_cond_wait. In this case, the touch page threads wait forever for the
main thread to wake them up, causing a deadlock.
Signed-off-by: Bauerchen <bauerchen@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When using C11 atomics, non-seqcst reads and writes do not participate
in the total order of seqcst operations. In util/async.c and util/aio-posix.c,
in particular, the pattern that we use
write ctx->notify_me write bh->scheduled
read bh->scheduled read ctx->notify_me
if !bh->scheduled, sleep if ctx->notify_me, notify
needs to use seqcst operations for both the write and the read. In
general this is something that we do not want, because there can be
many sources that are polled in addition to bottom halves. The
alternative is to place a seqcst memory barrier between the write
and the read. This also comes with a disadvantage, in that the
memory barrier is implicit on strongly-ordered architectures and
it wastes a few dozen clock cycles.
Fortunately, ctx->notify_me is never written concurrently by two
threads, so we can assert that and relax the writes to ctx->notify_me.
The resulting solution works and performs well on both aarch64 and x86.
Note that the atomic_set/atomic_read combination is not an atomic
read-modify-write, and therefore it is even weaker than C11 ATOMIC_RELAXED;
on x86, ATOMIC_RELAXED compiles to a locked operation.
Analyzed-by: Ying Fang <fangying1@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Ying Fang <fangying1@huawei.com>
Message-Id: <20200407140746.8041-6-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The io_uring_enter(2) syscall returns with errno=EINTR when interrupted
by a signal. Retry the syscall in this case.
It's essential to do this in the io_uring_submit_and_wait() case. My
interpretation of the Linux v5.5 io_uring_enter(2) code is that it
shouldn't affect the io_uring_submit() case, but there is no guarantee
this will always be the case. Let's check for -EINTR around both APIs.
Note that the liburing APIs have -errno return values.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200408091139.273851-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Unfortunately reading /proc/self/maps is still considered the gold
standard for a process finding out about it's own memory layout. As we
will want this data in other contexts soon factor out the code to read
and parse the data. Rather than just blindly copying the existing
sscanf based code we use a more modern glib version of the parsing
code to make a more general purpose map structure.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200403191150.863-9-alex.bennee@linaro.org>
When a file descriptor becomes ready we must re-arm POLL_ADD. This is
done by adding an sqe to the io_uring sq ring. The ->need_wait()
function wasn't taking pending sqes into account and therefore
io_uring_submit_and_wait() was not being called. Polling for cqes
failed to detect fd readiness since we hadn't submitted the sqe to
io_uring.
This patch fixes the following tests/test-aio -p /aio/event/wait
failure:
ok 11 /aio/event/wait
**
ERROR:tests/test-aio.c:374:test_flush_event_notifier: assertion failed: (aio_poll(ctx, false))
Reported-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200402145434.99349-1-stefanha@redhat.com
Fixes: 73fd282e7b
("aio-posix: add io_uring fd monitoring implementation")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
By increasing avx2 length_to_accel to 128, we can simplify its logic and reduce a
branch.
The authorship of this patch actually belongs to Richard Henderson
<richard.henderson@linaro.org>, I just fixed a boundary case on his
original patch.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1585119021-46593-2-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because in unit test, init_accel() will be called several times, each with
different accelerator type.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1585119021-46593-1-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When external event sources are disabled fdmon-io_uring falls back to
fdmon-poll. The ->need_wait() callback needs to watch for this so it
can return true when external event sources are disabled.
It is also necessary to call ->wait() when AioHandlers have changed
because io_uring is asynchronous and we must submit new sqes.
Both of these changes to ->need_wait() together fix tests/test-aio -p
/aio/external-client, which failed with:
test-aio: tests/test-aio.c:404: test_aio_external_client: Assertion `aio_poll(ctx, false)' failed.
Reported-by: Julia Suvorova <jusual@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20200319163559.117903-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Firstly, _next_dirty_area is for scenarios when we may contiguously
search for next dirty area inside some limited region, so it is more
comfortable to specify "end" which should not be recalculated on each
iteration.
Secondly, let's add a possibility to limit resulting area size, not
limiting searching area. This will be used in NBD code in further
commit. (Note that now bdrv_dirty_bitmap_next_dirty_area is unused)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-8-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
We have bdrv_dirty_bitmap_next_zero, let's add corresponding
bdrv_dirty_bitmap_next_dirty, which is more comfortable to use than
bitmap iterators in some cases.
For test modify test_hbitmap_next_zero_check_range to check both
next_zero and next_dirty and add some new checks.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-7-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
We are going to introduce bdrv_dirty_bitmap_next_dirty so that same
variable may be used to store its return value and to be its parameter,
so it would int64_t.
Similarly, we are going to refactor hbitmap_next_dirty_area to use
hbitmap_next_dirty together with hbitmap_next_zero, therefore we want
hbitmap_next_zero parameter type to be int64_t too.
So, for convenience update all parameters of *_next_zero and
*_next_dirty_area to be int64_t.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-6-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Function is internal and even commented as internal. Drop its
definition from .h file.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-4-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
The function is definitely internal (it's not used by third party and
it has complicated interface). Move it to .c file.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-3-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
We have APIs which returns signed int64_t, to be able to return error.
Therefore we can't handle bitmaps with absolute size larger than
(INT64_MAX+1). Still, keep maximum to be INT64_MAX which is a bit
safer.
Note, that bitmaps are used to represent disk images, which can't
exceed INT64_MAX anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
This patch introduces two lock guard macros that automatically unlock a
lock object (QemuMutex and others):
void f(void) {
QEMU_LOCK_GUARD(&mutex);
if (!may_fail()) {
return; /* automatically unlocks mutex */
}
...
}
and:
WITH_QEMU_LOCK_GUARD(&mutex) {
if (!may_fail()) {
return; /* automatically unlocks mutex */
}
}
/* automatically unlocks mutex here */
...
Convert qemu-timer.c functions that benefit from these macros as an
example. Manual qemu_mutex_lock/unlock() callers are left unmodified in
cases where clarity would not improve by switching to the macros.
Many other QemuMutex users remain in the codebase that might benefit
from lock guards. Over time they can be converted, if that is
desirable.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Use QEMU_MAKE_LOCKABLE_NONNULL. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On upgrades the old .so files usually are replaced. But on the other
hand since a qemu process represents a guest instance it is usually kept
around.
That makes late addition of dynamic features e.g. 'hot-attach of a ceph
disk' fail by trying to load a new version of e.f. block-rbd.so into an
old still running qemu binary.
This adds a fallback to also load modules from a versioned directory in the
temporary /var/run path. That way qemu is providing a way for packaging
to store modules of an upgraded qemu package as needed until the next reboot.
An example how that can then be used in packaging can be seen in:
https://git.launchpad.net/~paelzer/ubuntu/+source/qemu/log/?h=bug-1847361-miss-old-so-on-upgrade-UBUNTU
Fixes: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1847361
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200310145806.18335-2-christian.ehrhardt@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mutex and condition variable were never initialized, causing
-mem-prealloc to abort with an assertion failure.
Fixes: 037fb5eb39
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Cc: bauerchen <bauerchen@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
And intialize buffer_is_zero() with it, when Intel AVX512F is
available on host.
This function utilizes Intel AVX512 fundamental instructions which
is faster than its implementation with AVX2 (in my unit test, with
4K buffer, on CascadeLake SP, ~36% faster, buffer_zero_avx512() V.S.
buffer_zero_avx2()).
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When there are many poll handlers it's likely that some of them are idle
most of the time. Remove handlers that haven't had activity recently so
that the polling loop scales better for guests with a large number of
devices.
This feature only takes effect for the Linux io_uring fd monitoring
implementation because it is capable of combining fd monitoring with
userspace polling. The other implementations can't do that and risk
starving fds in favor of poll handlers, so don't try this optimization
when they are in use.
IOPS improves from 10k to 105k when the guest has 100
virtio-blk-pci,num-queues=32 devices and 1 virtio-blk-pci,num-queues=1
device for rw=randread,iodepth=1,bs=4k,ioengine=libaio on NVMe.
[Clarified aio_poll_handlers locking discipline explanation in comment
after discussion with Paolo Bonzini <pbonzini@redhat.com>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200305170806.1313245-8-stefanha@redhat.com
Message-Id: <20200305170806.1313245-8-stefanha@redhat.com>
Unlike ppoll(2) and epoll(7), Linux io_uring completions can be polled
from userspace. Previously userspace polling was only allowed when all
AioHandler's had an ->io_poll() callback. This prevented starvation of
fds by userspace pollable handlers.
Add the FDMonOps->need_wait() callback that enables userspace polling
even when some AioHandlers lack ->io_poll().
For example, it's now possible to do userspace polling when a TCP/IP
socket is monitored thanks to Linux io_uring.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200305170806.1313245-7-stefanha@redhat.com
Message-Id: <20200305170806.1313245-7-stefanha@redhat.com>
The recent Linux io_uring API has several advantages over ppoll(2) and
epoll(2). Details are given in the source code.
Add an io_uring implementation and make it the default on Linux.
Performance is the same as with epoll(7) but later patches add
optimizations that take advantage of io_uring.
It is necessary to change how aio_set_fd_handler() deals with deleting
AioHandlers since removing monitored file descriptors is asynchronous in
io_uring. fdmon_io_uring_remove() marks the AioHandler deleted and
aio_set_fd_handler() will let it handle deletion in that case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200305170806.1313245-6-stefanha@redhat.com
Message-Id: <20200305170806.1313245-6-stefanha@redhat.com>
The AioHandler *node, bool is_new arguments are more complicated to
think about than simply being given AioHandler *old_node, AioHandler
*new_node.
Furthermore, the new Linux io_uring file descriptor monitoring mechanism
added by the new patch requires access to both the old and the new
nodes. Make this change now in preparation.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200305170806.1313245-5-stefanha@redhat.com
Message-Id: <20200305170806.1313245-5-stefanha@redhat.com>
The ppoll(2) and epoll(7) file descriptor monitoring implementations are
mixed with the core util/aio-posix.c code. Before adding another
implementation for Linux io_uring, extract out the existing
ones so there is a clear interface and the core code is simpler.
The new interface is AioContext->fdmon_ops, a pointer to a FDMonOps
struct. See the patch for details.
Semantic changes:
1. ppoll(2) now reflects events from pollfds[] back into AioHandlers
while we're still on the clock for adaptive polling. This was
already happening for epoll(7), so if it's really an issue then we'll
need to fix both in the future.
2. epoll(7)'s fallback to ppoll(2) while external events are disabled
was broken when the number of fds exceeded the epoll(7) upgrade
threshold. I guess this code path simply wasn't tested and no one
noticed the bug. I didn't go out of my way to fix it but the correct
code is simpler than preserving the bug.
I also took some liberties in removing the unnecessary
AioContext->epoll_available (just check AioContext->epollfd != -1
instead) and AioContext->epoll_enabled (it's implicit if our
AioContext->fdmon_ops callbacks are being invoked) fields.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200305170806.1313245-4-stefanha@redhat.com
Message-Id: <20200305170806.1313245-4-stefanha@redhat.com>
Now that run_poll_handlers_once() is only called by run_poll_handlers()
we can improve the CPU time profile by moving the expensive
RCU_READ_LOCK() out of the polling loop.
This reduces the run_poll_handlers() from 40% CPU to 10% CPU in perf's
sampling profiler output.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200305170806.1313245-3-stefanha@redhat.com
Message-Id: <20200305170806.1313245-3-stefanha@redhat.com>
One iteration of polling is always performed even when polling is
disabled. This is done because:
1. Userspace polling is cheaper than making a syscall. We might get
lucky.
2. We must poll once more after polling has stopped in case an event
occurred while stopping polling.
However, there are downsides:
1. Polling becomes a bottleneck when the number of event sources is very
high. It's more efficient to monitor fds in that case.
2. A high-frequency polling event source can starve non-polling event
sources because ppoll(2)/epoll(7) is never invoked.
This patch removes the forced polling iteration so that poll_ns=0 really
means no polling.
IOPS increases from 10k to 60k when the guest has 100
virtio-blk-pci,num-queues=32 devices and 1 virtio-blk-pci,num-queues=1
device because the large number of event sources being polled slows down
the event loop.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200305170806.1313245-2-stefanha@redhat.com
Message-Id: <20200305170806.1313245-2-stefanha@redhat.com>
QLIST_SAFE_REMOVE() is confusing here because the node must be on the
list. We actually just wanted to clear the linked list pointers when
removing it from the list. QLIST_REMOVE() now does this, so switch to
it.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200224103406.1894923-3-stefanha@redhat.com
Message-Id: <20200224103406.1894923-3-stefanha@redhat.com>
Use error_setg_win32() which adds a hint similar to strerror(errno)).
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200228100726.8414-3-philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[desc]:
Large memory VM starts slowly when using -mem-prealloc, and
there are some areas to optimize in current method;
1、mmap will be used to alloc threads stack during create page
clearing threads, and it will attempt mm->mmap_sem for write
lock, but clearing threads have hold read lock, this competition
will cause threads createion very slow;
2、methods of calcuating pages for per threads is not well;if we use
64 threads to split 160 hugepage,63 threads clear 2page,1 thread
clear 34 page,so the entire speed is very slow;
to solve the first problem,we add a mutex in thread function,and
start all threads when all threads finished createion;
and the second problem, we spread remainder to other threads,in
situation that 160 hugepage and 64 threads, there are 32 threads
clear 3 pages,and 32 threads clear 2 pages.
[test]:
320G 84c VM start time can be reduced to 10s
680G 84c VM start time can be reduced to 18s
Signed-off-by: bauerchen <bauerchen@tencent.com>
Reviewed-by: Pan Rui <ruippan@tencent.com>
Reviewed-by: Ivan Ren <ivanren@tencent.com>
[Simplify computation of the number of pages per thread. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The virtual-device fuzzer must initialize QOM, prior to running
vl:qemu_init, so that it can use the qos_graph to identify the arguments
required to initialize a guest for libqos-assisted fuzzing. This change
prevents errors when vl:qemu_init tries to (re)initialize the previously
initialized QOM module.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200220041118.23264-4-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
File descriptor monitoring is O(1) with epoll(7), but
aio_dispatch_handlers() still scans all AioHandlers instead of
dispatching just those that are ready. This makes aio_poll() O(n) with
respect to the total number of registered handlers.
Add a local ready_list to aio_poll() so that each nested aio_poll()
builds a list of handlers ready to be dispatched. Since file descriptor
polling is level-triggered, nested aio_poll() calls also see fds that
were ready in the parent but not yet dispatched. This guarantees that
nested aio_poll() invocations will dispatch all fds, even those that
became ready before the nested invocation.
Since only handlers ready to be dispatched are placed onto the
ready_list, the new aio_dispatch_ready_handlers() function provides O(1)
dispatch.
Note that AioContext polling is still O(n) and currently cannot be fully
disabled. This still needs to be fixed before aio_poll() is fully O(1).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200214171712.541358-6-stefanha@redhat.com
[Fix compilation error on macOS where there is no epoll(87). The
aio_epoll() prototype was out of date and aio_add_ready_list() needed to
be moved outside the ifdef.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is not necessary to scan all AioHandlers for deletion. Keep a list
of deleted handlers instead of scanning the full list of all handlers.
The AioHandler->deleted field can be dropped. Let's check if the
handler has been inserted into the deleted list instead. Add a new
QLIST_IS_INSERTED() API for this check.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200214171712.541358-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Don't pass the nanosecond timeout into epoll_wait(), which expects
milliseconds.
The epoll_wait() timeout value does not matter if qemu_poll_ns()
determined that the poll fd is ready, but passing a value in the wrong
units is still ugly. Pass a 0 timeout to epoll_wait() instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200214171712.541358-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
epoll_handler is a stack variable and must not be accessed after it goes
out of scope:
if (aio_epoll_check_poll(ctx, pollfds, npfd, timeout)) {
AioHandler epoll_handler;
...
add_pollfd(&epoll_handler);
ret = aio_epoll(ctx, pollfds, npfd, timeout);
} ...
...
/* if we have any readable fds, dispatch event */
if (ret > 0) {
for (i = 0; i < npfd; i++) {
nodes[i]->pfd.revents = pollfds[i].revents;
}
}
nodes[0] is &epoll_handler, which has already gone out of scope.
There is no need to use pollfds[] for epoll. We don't need an
AioHandler for the epoll fd.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200214171712.541358-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The ctx->first_bh list contains all created BHs, including those that
are not scheduled. The list is iterated by the event loop and therefore
has O(n) time complexity with respected to the number of created BHs.
Rewrite BHs so that only scheduled or deleted BHs are enqueued.
Only BHs that actually require action will be iterated.
One semantic change is required: qemu_bh_delete() enqueues the BH and
therefore invokes aio_notify(). The
tests/test-aio.c:test_source_bh_delete_from_cb() test case assumed that
g_main_context_iteration(NULL, false) returns false after
qemu_bh_delete() but it now returns true for one iteration. Fix up the
test case.
This patch makes aio_compute_timeout() and aio_bh_poll() drop from a CPU
profile reported by perf-top(1). Previously they combined to 9% CPU
utilization when AioContext polling is commented out and the guest has 2
virtio-blk,num-queues=1 and 99 virtio-blk,num-queues=32 devices.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200221093951.1414693-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The first rcu_read_lock/unlock() is expensive. Nested calls are cheap.
This optimization increases IOPS from 73k to 162k with a Linux guest
that has 2 virtio-blk,num-queues=1 and 99 virtio-blk,num-queues=32
devices.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200218182708.914552-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Here's the next patch of ppc target patches. Highlights are:
* Some fixes for CAS / unplug interactions
* Remove some leaks of device trees
* Some fixes for the PHB3 and PHB4 devices
* Support for NVDIMMs on the pseries machine type
* Assorted other fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=hrAW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200221' into staging
ppc patch queue 2020-02-21
Here's the next patch of ppc target patches. Highlights are:
* Some fixes for CAS / unplug interactions
* Remove some leaks of device trees
* Some fixes for the PHB3 and PHB4 devices
* Support for NVDIMMs on the pseries machine type
* Assorted other fixes and cleanups
# gpg: Signature made Fri 21 Feb 2020 03:35:40 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.0-20200221:
hw/ppc/virtex_ml507:fix leak of fdevice tree blob
spapr: Fix handling of unplugged devices during CAS and migration
spapr: Don't use spapr_drc_needed() in CAS code
ppc: free 'fdt' after reset the machine
target/ppc/cpu.h: Clean up comments in the struct CPUPPCState definition
target/ppc/cpu.h: Move fpu related members closer in cpu env
target/ppc: Fix typo in comments
spapr: Allow changing offset for -kernel image
pnv/phb3: Add missing break statement
pnv/phb4: Fix error path in pnv_pec_realize()
pnv/phb3: Convert 1u to 1ull
target/ppc/cpu.h: Remove duplicate includes
spapr: Add Hcalls to support PAPR NVDIMM device
spapr: Add NVDIMM device support
nvdimm: add uuid property to nvdimm
mem: move nvdimm_device_list to utilities
ppc: function to setup latest class options
ppc/pnv: Fix PCI_EXPRESS dependency
qtest: Fix rtas dependencies
spapr/rtas: Print message from "ibm,os-term"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
nvdimm_device_list is required for parsing the list for devices
in subsequent patches. Move it to common utility area.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <158131055857.2897.15658377276504711773.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Disable by default build of fdt, slirp and tools with linux-user
Improve strace and use qemu_log to send trace to a file
Add partial ALSA ioctl supports
-----BEGIN PGP SIGNATURE-----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=WAH+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.0-pull-request' into staging
Implement membarrier, SO_RCVTIMEO and SO_SNDTIMEO
Disable by default build of fdt, slirp and tools with linux-user
Improve strace and use qemu_log to send trace to a file
Add partial ALSA ioctl supports
# gpg: Signature made Thu 20 Feb 2020 09:20:20 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-5.0-pull-request:
linux-user: Add support for selected alsa timer instructions using ioctls
linux-user: Add support for getting/setting selected alsa timer parameters using ioctls
linux-user: Add support for selecting alsa timer using ioctl
linux-user: Add support for getting/setting specified alsa timer parameters using ioctls
linux-user: Add support for getting alsa timer version and id
linux-user: remove gemu_log from the linux-user tree
linux-user: Use `qemu_log' for strace
linux-user: Use `qemu_log' for non-strace logging
configure: Avoid compiling system tools on user build by default
linux-user/strace: Improve output of various syscalls
configure: linux-user doesn't need neither fdt nor slirp
linux-user: implement getsockopt SO_RCVTIMEO and SO_SNDTIMEO
linux-user: Implement membarrier syscall
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This change switches linux-user strace logging to use the newer `qemu_log`
logging subsystem rather than the older `gemu_log` (notice the "g")
logger. `qemu_log` has several advantages, namely that it allows logging
to a file, and provides a more unified interface for configuration
of logging (via the QEMU_LOG environment variable or options).
This change introduces a new log mask: `LOG_STRACE` which is used for
logging of user-mode strace messages.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Josh Kunz <jkz@google.com>
Message-Id: <20200204025416.111409-3-jkz@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In a few places we report errno formatted as a negative integer.
This is not as user friendly as it can be. Use strerror() and/or
error_setg_errno() instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <4949c3ecf1a32189b8a4b5eb4b0fd04c1122501d.1581674006.git.mprivozn@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some older parts of QEMU's codebase assume that CLOCK_MONOTONIC
might not be defined by the host OS, and have workarounds to
deal with this. However, more recently (notably in commit
50290c002c for qemu-img in mid-2019, but also much
earlier in 2011 in commit 22795174a3 for ui/spice-display.c)
we've written code that assumes CLOCK_MONOTONIC is always
defined. The only host OS anybody's ever noticed this on
is OSX 10.11 and earlier, which we don't support.
So we can assume that all our host OSes have the #define,
and we can remove some now-unnecessary ifdefs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200201172252.6605-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NULL is a valid log filename used to indicate we want to use stderr
but qemu_set_log_filename (which is called by bsd-user/main.c) was not
handling it correctly.
That also made redundant a couple of NULL checks in calling code which
have been removed.
Signed-off-by: Salvador Fandino <salvador@qindel.com>
Message-Id: <20200123193626.19956-1-salvador@qindel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
uClibc defines _SC_LEVEL1_ICACHE_LINESIZE and _SC_LEVEL1_DCACHE_LINESIZE
but the corresponding sysconf calls returns -1, which is a valid result,
meaning that the limit is indeterminate.
Handle this situation using the fallback values instead of crashing due
to an assertion failure.
Signed-off-by: Carlos Santos <casantos@redhat.com>
Message-Id: <20191017123713.30192-1-casantos@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeFbG8AAoJEL/70l94x66DCpMIAKBwxBL+VegqI+ySKgmtIBQX
LtU+ardEeZ37VfWfvuWzTFe+zQ0hsFpz/e0LHE7Ae+LVLMNWXixlmMrTIm+Xs762
hJzxBjhUhkdrMioVYTY16Kqap4Nqaxu70gDQ32Ve2sY6xYGxYLSaJooBOU5bXVgb
HPspHFVpeP6ZshBd1n2LXsgURE6v3AjTwqcsPCkL/AESFdkdOsoHeXjyKWJG1oPy
W7btzlUEqVsauZI8/PhhW/8hZUvUsJVHonYLTZTyy8aklU7aOILSyT2uPXFBVUVQ
irkQjLtD4dWlogBKO4i/QHMuwV+Asa57WNPmqv3EcIWPUWmTY84H0g2AxRgcc2M=
=48jx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Compat machines fix (Denis)
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
# gpg: Signature made Wed 08 Jan 2020 10:41:00 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (38 commits)
chardev: Use QEMUChrEvent enum in IOEventHandler typedef
chardev: use QEMUChrEvent instead of int
chardev/char: Explicit we ignore some QEMUChrEvent in IOEventHandler
monitor/hmp: Explicit we ignore a QEMUChrEvent in IOEventHandler
monitor/qmp: Explicit we ignore few QEMUChrEvent in IOEventHandler
virtio-console: Explicit we ignore some QEMUChrEvent in IOEventHandler
vhost-user-blk: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-net: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-crypto: Explicit we ignore some QEMUChrEvent in IOEventHandler
ccid-card-passthru: Explicit we ignore QEMUChrEvent in IOEventHandler
hw/usb/redirect: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/usb/dev-serial: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/char/terminal3270: Explicit ignored QEMUChrEvent in IOEventHandler
hw/ipmi: Explicit we ignore some QEMUChrEvent in IOEventHandler
hw/ipmi: Remove unnecessary declarations
target/i386: Add missed features to Cooperlake CPU model
target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES
target/i386: Fix handling of k_gs_base register in 32-bit mode in gdbstub
hw/rtc/mc146818: Add missing dependency on ISA Bus
hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Internally, qemu may create chardev without ID. Those will not be
looked up with qemu_chr_find(), which prevents using qdev_prop_set_chr().
Use id_generate(), to generate an internal name (prefixed with #), so
no conflict exist with user-named chardev.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: xiaoqiang zhao <zxq_yx_007@163.com>
Record/replay feature of icount allows deterministic running of execution
scenarios. Some CPUs and peripheral devices read random numbers from
external sources making deterministic execution impossible.
This patch adds recording and replaying of random read operations
into guest-random module, which is used by the virtual hardware.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <157675984852.14505.15709141760677102489.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hi,
With external processes or helpers participating to the VM support, it
becomes necessary to handle their migration. Various options exist to
transfer their state:
1) as the VM memory, RAM or devices (we could say that's how
vhost-user devices can be handled today, they are expected to
restore from ring state)
2) other "vmstate" (as with TPM emulator state blobs)
3) left to be handled by management layer
1) is not practical, since an external processes may legitimatelly
need arbitrary state date to back a device or a service, or may not
even have an associated device.
2) needs ad-hoc code for each helper, but is simple and working
3) is complicated for management layer, QEMU has the migration timing
The proposed "dbus-vmstate" object will connect to a given D-Bus
address, and save/load from org.qemu.VMState1 owners on migration.
Thus helpers can easily have their state migrated with QEMU, without
implementing ad-hoc support (such as done for TPM emulation)
D-Bus is ubiquitous on Linux (it is systemd IPC), and can be made to
work on various other OSes. There are several implementations and good
bindings for various languages. (the tests/dbus-vmstate-test.c is a
good example of how simple the implementation of services can be, even
in C)
dbus-vmstate is put into use by the libvirt series "[PATCH 00/23] Use
a slirp helper process".
v2:
- fix build with broken mingw-glib
-----BEGIN PGP SIGNATURE-----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=M4kD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/dbus-vmstate7-pull-request' into staging
Add dbus-vmstate
Hi,
With external processes or helpers participating to the VM support, it
becomes necessary to handle their migration. Various options exist to
transfer their state:
1) as the VM memory, RAM or devices (we could say that's how
vhost-user devices can be handled today, they are expected to
restore from ring state)
2) other "vmstate" (as with TPM emulator state blobs)
3) left to be handled by management layer
1) is not practical, since an external processes may legitimatelly
need arbitrary state date to back a device or a service, or may not
even have an associated device.
2) needs ad-hoc code for each helper, but is simple and working
3) is complicated for management layer, QEMU has the migration timing
The proposed "dbus-vmstate" object will connect to a given D-Bus
address, and save/load from org.qemu.VMState1 owners on migration.
Thus helpers can easily have their state migrated with QEMU, without
implementing ad-hoc support (such as done for TPM emulation)
D-Bus is ubiquitous on Linux (it is systemd IPC), and can be made to
work on various other OSes. There are several implementations and good
bindings for various languages. (the tests/dbus-vmstate-test.c is a
good example of how simple the implementation of services can be, even
in C)
dbus-vmstate is put into use by the libvirt series "[PATCH 00/23] Use
a slirp helper process".
v2:
- fix build with broken mingw-glib
# gpg: Signature made Mon 06 Jan 2020 14:43:35 GMT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/dbus-vmstate7-pull-request:
tests: add dbus-vmstate-test
tests: add migration-helpers unit
dockerfiles: add dbus-daemon to some of latest distributions
configure: add GDBUS_CODEGEN
Add dbus-vmstate object
util: add dbus helper unit
docs: start a document to describe D-Bus usage
vmstate: replace DeviceState with VMStateIf
vmstate: add qom interface to get id
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a helper function to match qemu_open() which may return files
under the /dev/fdset prefix. Those shouldn't be removed, since it's
only a qemu namespace.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl37M6gACgkQ+9DbCVqe
KkQ0Rwf/d0lGDPQN1Uf0zqZRQQmDCqWVuqHhZJ5xWDjbyVT2eUwR07TvNZeUKEWX
iO+u6S7Tv91oLjZN5WjhaiuSjtJaEzCdcpkIJAWXLP/lzse37HEwvLBsdg71y+46
LNvBrJRPpQotdb7fjr8RgCwc1qg2Bz15ekSn7XIA175zTMmUsshLJBVhLbGNqrVm
F2UmjB9oFJ0+nzrcEnpFmWw7xvVrX1dImZXv5C2pvuHF7efSjGwiFviTRZgDjOGs
V7HiWRV1QcgTigncncxTMbhMTKTVKK+e7O+y0DZWt/NSrT/yLDy5rcwySpmvu6C+
cRmh/0tMo1KAhiz8Xy8LookhVj6hdA==
=OAkV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging
Various testing and logging updates
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
# gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits)
tests/tcg: ensure we re-configure if configure.sh is updated
trace: replace hand-crafted pattern_glob with g_pattern_match_simple
linux-user: convert target_munmap debug to a tracepoint
linux-user: log page table changes under -d page
linux-user: add target_mmap_complete tracepoint
linux-user: convert target_mmap debug to tracepoint
linux-user: convert target_mprotect debug to tracepoint
travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry
docker: gtester is no longer used
Added tests for close and change of logfile.
Add use of RCU for qemu_logfile.
qemu_log_lock/unlock now preserves the qemu_logfile handle.
Add a mutex to guarantee single writer to qemu_logfile handle.
Cleaned up flow of code in qemu_set_log(), to simplify and clarify.
Fix double free issue in qemu_set_log_filename().
ci: build out-of-tree
travis.yml: Enable builds on arm64, ppc64le and s390x
tests/test-util-filemonitor: Skip test on non-x86 Travis containers
tests/hd-geo-test: Skip test when images can not be created
iotests: Skip test 079 if it is not possible to create large files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This now allows changing the logfile while logging is active,
and also solves the issue of a seg fault while changing the logfile.
Any read access to the qemu_logfile handle will use
the rcu_read_lock()/unlock() around the use of the handle.
To fetch the handle we will use atomic_rcu_read().
We also in many cases do a check for validity of the
logfile handle before using it to deal with the case where the
file is closed and set to NULL.
The cases where we write to the qemu_logfile will use atomic_rcu_set().
Writers will also use call_rcu() with a newly added qemu_logfile_free
function for freeing/closing when readers have finished.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-6-robert.foley@linaro.org>
Also added qemu_logfile_init() for initializing the logfile mutex.
Note that inside qemu_set_log() we needed to add a pair of
qemu_mutex_unlock() calls in order to avoid a double lock in
qemu_log_close(). This unavoidable temporary ugliness will be
cleaned up in a later patch in this series.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-4-robert.foley@linaro.org>
Also added some explanation of the reasoning behind the branches.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-3-robert.foley@linaro.org>
After freeing the logfilename, we set logfilename to NULL, in case of an
error which returns without setting logfilename.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-2-robert.foley@linaro.org>
qemu_strtoi64() assumes int64_t is long long. This is marked FIXME.
Replace by a QEMU_BUILD_BUG_ON() to avoid surprises.
Same for qemu_strtou64().
Fix a typo in qemu_strtoul()'s contract while there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191125133846.27790-2-armbru@redhat.com>
[lv: removed trailing whitespace]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Mostly, Error ** is for returning error from the function, so the
callee sets it. However these three functions get already filled errp
parameter. They don't change the pointer itself, only change the
internal state of referenced Error object. So we can make it
Error *const * errp, to stress the behavior. It will also help
coccinelle script (in future) to distinguish such cases from common
errp usage.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191205174635.18758-4-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message typo fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-msg parameter "timestamp" defaults to "off" if you don't specify msg,
and to "on" if you do. Messed up right in commit 5e2ac51917 "add
timestamp to error_report()". Mostly harmless, because "timestamp" is
the only parameter, so "if you do" is "-msg ''", which nobody does.
Change the default to "off" no matter what.
While there, rename enable_timestamp_msg to error_with_timestamp, and
polish documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191010081508.8978-1-armbru@redhat.com>
The automatic rcu read lock maintenance works quite
nicely in this case where it previously relied on a comment to
delimit the lifetime and now has a block.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The stubs mechanism relies on static libraries and compilation order,
which is a bit brittle and should be avoided unless necessary.
Replace it with Boolean operations on CONFIG_* symbols.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an option to trigger memory writeback to sync given memory region
with the corresponding backing store, case one is available.
This extends the support for persistent memory, allowing syncing on-demand.
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191121000843.24844-3-beata.michalska@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clang does not like do_strtosz()'s code to guard against overflow:
qemu/util/cutils.c:245:23: error: implicit conversion from 'unsigned long' to 'double' changes value from 18446744073709550592 to 18446744073709551616 [-Werror,-Wimplicit-int-float-conversion]
The warning will be enabled by default in clang 10. It is not
available for clang <= 9.
val * mul >= 0xfffffffffffffc00 is indeed wrong. 0xfffffffffffffc00
is not representable exactly as double. It's half-way between the
representable values 0xfffffffffffff800 and 0x10000000000000000.
Which one we get is implementation-defined. Bad.
We want val * mul > (the largest uint64_t exactly representable as
double). That's 0xfffffffffffff800. Write it as nextafter(0x1p64, 0)
with a suitable comment.
Signed-off-by: Fangrui Song <i@maskray.me>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Patch split, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191122080039.12771-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Coverity warns that we store the address of a stack variable through a
pointer passed in by the caller, which would let the caller trivially
trigger use-after-free if that stored value is still present when we
finish execution. However, the way coroutines work is that after our
call to qemu_coroutine_yield(), control is temporarily continued in
the caller prior to our function concluding, and in order to resume
our coroutine, the caller must poll until the variable has been set to
NULL. Thus, we can add an assert that we do not leak stack storage to
the caller on function exit.
Fixes: Coverity CID 1406474
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191111203524.21912-1-eblake@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Having the plugins grab stdout and spew stuff there is a bit ugly and
certainly makes the tests look ugly. Provide a hook back into QEMU
which can be redirected as needed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aaron Lindsay <aaron@os.amperecomputing.com>
- iotest patches
- Improve performance of the mirror block job in write-blocking mode
- Limit memory usage for the backup block job
- Add discard and write-zeroes support to the NVMe host block driver
- Fix a bug in the mirror job
- Prevent the qcow2 driver from creating technically non-compliant qcow2
v3 images (where there is not enough extra data for snapshot table
entries)
- Allow callers of bdrv_truncate() (etc.) to determine whether the file
must be resized to the exact given size or whether it is OK for block
devices not to shrink
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl2224ESHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AeXMH/RXKEX4BZYMRKCe41P18tJC9Bl2x0T20
YeOsZVvpARlr7o/36BF2kGFF4MnL0OQ+9ELuyROX865rk/VL2rWqnHDE5oQM889a
dFwMs+0zvNbig3iLNcw0H5OkE2mrdM+a1EUdn/lBe/39Z8dPqPxRGqIYHq38Ugdu
emwSy1nWen7o0f71HRJfyVtI3KcrzXx71FrA/FY2yL/eHz+zRYGZj2SpAdFPkXP/
lgaz+m0tWhnSW1QzEOXB0Gh69ULt/DczCinYmv5qUY1noW5TPPtiDNCQTts5O4ba
oJsR3AJv5/l9m65JTmiyQSqnQfPcstrQ5FqOcSnP637cfqUFyWsvdks=
=L7v1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-10-28' into staging
Block patches for softfreeze:
- iotest patches
- Improve performance of the mirror block job in write-blocking mode
- Limit memory usage for the backup block job
- Add discard and write-zeroes support to the NVMe host block driver
- Fix a bug in the mirror job
- Prevent the qcow2 driver from creating technically non-compliant qcow2
v3 images (where there is not enough extra data for snapshot table
entries)
- Allow callers of bdrv_truncate() (etc.) to determine whether the file
must be resized to the exact given size or whether it is OK for block
devices not to shrink
# gpg: Signature made Mon 28 Oct 2019 12:13:53 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2019-10-28: (69 commits)
qemu-iotests: restrict 264 to qcow2 only
Revert "qemu-img: Check post-truncation size"
block: Pass truncate exact=true where reasonable
block: Let format drivers pass @exact
block: Evaluate @exact in protocol drivers
block: Add @exact parameter to bdrv_co_truncate()
block: Do not truncate file node when formatting
block/cor: Drop cor_co_truncate()
block: Handle filter truncation like native impl.
iotests: Test qcow2's snapshot table handling
iotests: Add peek_file* functions
qcow2: Fix v3 snapshot table entry compliancy
qcow2: Repair snapshot table with too many entries
qcow2: Fix overly long snapshot tables
qcow2: Keep track of the snapshot table length
qcow2: Fix broken snapshot table entries
qcow2: Add qcow2_check_fix_snapshot_table()
qcow2: Separate qcow2_check_read_snapshot_table()
qcow2: Write v3-compliant snapshot list on upgrade
qcow2: Put qcow2_upgrade() into its own function
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce an API for some shared splittable resource, like memory.
It's going to be used by backup. Backup uses both read/write io and
copy_range. copy_range may consume memory implictly, so the new API is
abstract: it doesn't allocate any real memory but only hands out
tickets.
The idea is that we have some total amount of something and callers
should wait in coroutine queue if there is not enough of the resource
at the moment.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191022111805.3432-5-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
