Split the float conversion tests into separate groups and audit the
tests to check what is still broken. I was able to enable a bunch of
tests that had been missed before:
all the float to float conversions
ui32_to_extF80
ui64_to_extF80
extF80_to_ui32
extF80_to_ui32_r_minMag
extF80_to_ui64
extF80_to_ui64_r_minMag
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-7-alex.bennee@linaro.org>
These have been fixed now so we no longer need a special version of
the le_quiet rule to skip the test.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-6-alex.bennee@linaro.org>
I'm not sure when this broke but we should use EXTRA_RUNS for
"virtual" tests which are not generated from the binary names.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-5-alex.bennee@linaro.org>
If we have an alternative to genisoimage we really need to tell the
script about it as well so it can use it. It will still default to
genisoimage in case it is run outside our build machinery.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200519132259.405-3-robert.foley@linaro.org>
migrate_get_socket_address() neglects to check
visit_type_SocketAddressList() failure. This smells like a leak, but
it actually will crash dereferencing @addrs. Pass &error_abort to
remove the code smell.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200505101908.6207-5-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We always miswrote the Fuloong machine... Fix its name.
Add an machine alias to the previous name for backward
compatibility.
Suggested-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-id: <20200526104726.11273-11-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The canon-a1100 machine can be used with the Barebox firmware. The
QEMU Advent Calendar 2018 features a pre-compiled image which we
can use for testing.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200514190422.23645-1-f4bug@amsat.org
Message-Id: <20200129090420.13954-1-thuth@redhat.com>
[PMD: Rebased MAINTAINERS]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
add cases to test tight and non-tight for abstract address type
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Slightly tidies the usage within softfloat.c and the
representation in float_status.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Introduce real BdrvChildRole
- blk/bdrv_make_empty() functions instead of calling callbacks directly
- mirror: Make sure that source and target size match
- block-copy: Fix uninitialized variable
- block/replication: Avoid cancelling the job twice
- ahci: Log lost IRQs
- iotests: Run pylint and mypy in a testcase
- iotests: log messages from notrun()
-----BEGIN PGP SIGNATURE-----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=JSKK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Introduce real BdrvChildRole
- blk/bdrv_make_empty() functions instead of calling callbacks directly
- mirror: Make sure that source and target size match
- block-copy: Fix uninitialized variable
- block/replication: Avoid cancelling the job twice
- ahci: Log lost IRQs
- iotests: Run pylint and mypy in a testcase
- iotests: log messages from notrun()
# gpg: Signature made Mon 18 May 2020 18:05:32 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (52 commits)
hw: Use QEMU_IS_ALIGNED() on parallel flash block size
iotests/030: Reduce run time by unthrottling job earlier
hw/ide/ahci: Log lost IRQs
iotests: log messages from notrun()
block/block-copy: Simplify block_copy_do_copy()
block/block-copy: Fix uninitialized variable in block_copy_task_entry
block: Drop @child_class from bdrv_child_perm()
block: Pass BdrvChildRole in remaining cases
block: Drop child_file
block: Drop bdrv_format_default_perms()
block: Make bdrv_filter_default_perms() static
block: Use bdrv_default_perms()
tests: Use child_of_bds instead of child_file
block: Use child_of_bds in remaining places
block: Make filter drivers use child_of_bds
block: Make format drivers use child_of_bds
block: Drop child_backing
block: Make backing files child_of_bds children
block: Drop child_format
block: Switch child_format users to child_of_bds
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
test_overlapping_3() throttles its active commit job so it can be sure
the job is still busy when it checks that you can't start a conflicting
streaming job.
However, it only sets the commit job back to full speed when it is
ready, which takes a few seconds while it's throttled. We can already
reset the limit after having checked that block-stream returns an error
and save these seconds.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200513100025.33543-1-kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Shift the logging initialization up to occur prior to validation checks,
so that notrun() messages still get printed to console.
(Also, remove the "debugging messages active" message, because we don't
need to see that hundreds of times per iotest suite run.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200514201614.19941-2-jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Implementations should decide the necessary permissions based on @role.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-35-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-33-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_default_perms() can decide which permission profile to use based on
the BdrvChildRole, so block drivers do not need to select it explicitly.
The blkverify driver now no longer shares the WRITE permission for the
image to verify. We thus have to adjust two places in
test-block-iothread not to take it. (Note that in theory, blkverify
should behave like quorum in this regard and share neither WRITE nor
RESIZE for both of its children. In practice, it does not really
matter, because blkverify is used only for debugging, so we might as
well keep its permissions rather liberal.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-30-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-29-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make all parents of backing files pass the appropriate BdrvChildRole.
By doing so, we can switch their BdrvChildClass over to the generic
child_of_bds, which will do the right thing when given a correct
BdrvChildRole.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-24-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, all callers pass 0 and no callee evaluates this value. Later
patches will change both.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-7-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, it is always set to 0. Later patches in this series will
ensure that all callers pass an appropriate combination of flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-6-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This structure nearly only contains parent callbacks for child state
changes. It cannot really reflect a child's role, because different
roles may overlap (as we will see when real roles are introduced), and
because parents can have custom callbacks even when the child fulfills a
standard role.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200513110544.176672-4-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_commit() already has a BlockBackend pointing to the BDS that we
want to empty, it just has the wrong permissions.
qemu-img commit has no BlockBackend pointing to the old backing file
yet, but introducing one is simple.
After this commit, bdrv_make_empty() is the only remaining caller of
BlockDriver.bdrv_make_empty().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200429141126.85159-5-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[kwolf: Fixed up reference output for 098]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We made sure that iotests.py passes pylint. It would be a shame if we
allowed new patches in that break this again, so let's just add a
meta-test case that runs pylint on it.
While we don't pass mypy --strict yet, we can already run it with a few
options that would be part of --strict to make sure that we won't
regress on these aspects at least until we can enable the full thing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200511163529.349329-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We need to fix only a few places so that iotests.py can pass
mypy --disallow-incomplete-defs, which seems to be a desirable option to
have enabled in the long run.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200511163529.349329-2-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests that the mirror job catches situations where the target node
has a different size than the source node. It must also forbid resize
operations when the job is already running.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200511135825.219437-5-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
229 relies on the mirror running into an I/O error when the target is
smaller than the source. After changing mirror to catch this condition
while starting the job, this test case won't get a job that is paused
for an I/O error any more. Use blkdebug instead to inject an error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200511135825.219437-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch makes the raw image the same size as the file in a different
format that is mirrored as raw to it to avoid errors when mirror starts
to enforce that source and target are the same size.
We check only that the first 512 bytes are zeroed (instead of 64k)
because some image formats create image files that are smaller than 64k,
so trying to read 64k would result in I/O errors. Apart from this, 512
is more appropriate anyway because the raw format driver protects
specifically the first 512 bytes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200511135825.219437-2-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since qemu-img map + x-dirty-bitmap remains the easiest way to read
persistent bitmaps at the moment, it makes a reasonable place to add
coverage to ensure we do not regress on the just-added parameters to
qemu-img map.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513181455.295267-1-eblake@redhat.com>
All calls to cvtnum check the return value and print the same error
message more or less. And so error reporting moved to cvtnum_full to
reduce code duplication and provide a single error
message. Additionally, cvtnum now wraps cvtnum_full with the existing
default range of 0 to MAX_INT64.
Acked-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Eyal Moscovici <eyal.moscovici@oracle.com>
Message-Id: <20200513133629.18508-2-eyal.moscovici@oracle.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix printf formatting, avoid trailing space, change error wording,
reformat commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
The softfloat function floatx80_round_to_int incorrectly handles the
case of a pseudo-denormal where only the high bit of the significand
is set, ignoring that bit (treating the number as an exact zero)
rather than treating the number as an alternative representation of
+/- 2^-16382 (which may round to +/- 1 depending on the rounding mode)
as hardware does. Fix this check (simplifying the code in the
process).
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005042339420.22972@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softfloat floatx80 comparisons fail to allow for pseudo-denormals,
which should compare equal to corresponding values with biased
exponent 1 rather than 0. Add an adjustment for that case when
comparing numbers with the same sign.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005042338470.22972@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softfloat function addFloatx80Sigs, used for addition of values
with the same sign and subtraction of values with opposite sign, fails
to handle the case where the two values both have biased exponent zero
and there is a carry resulting from adding the significands, which can
occur if one or both values are pseudo-denormals (biased exponent
zero, explicit integer bit 1). Add a check for that case, so making
the results match those seen on x86 hardware for pseudo-denormals.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005042337570.22972@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Conversions between IEEE floating-point formats should convert
signaling NaNs to quiet NaNs. Most of those in QEMU's softfloat code
do so, but those for floatx80 fail to. Fix those conversions to
silence signaling NaNs as well.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005042336170.22972@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If gdb never actually connected with the guest we need to catch that
and clean-up after ourselves.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200513175134.19619-2-alex.bennee@linaro.org>
Extract generic ioport_fuzz_qtest() method from
i440fx_fuzz_qtest(). This will help to write tests
not specific to the i440FX controller.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200514143433.18569-7-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Extract the generic pciconfig_fuzz_qos() method from
i440fx_fuzz_qos(). This will help to write tests not
specific to the i440FX controller.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200514143433.18569-6-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These typedefs are not used. Use a simple structure,
remote the typedefs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200514143433.18569-5-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200514143433.18569-4-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some devices availability depends on CONFIG options.
Use these options to only link tests when requested device
is available.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200514143433.18569-2-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Same story as for object_property_add(): the only way
object_property_del() can fail is when the property with this name
does not exist. Since our property names are all hardcoded, failure
is a programming error, and the appropriate way to handle it is
passing &error_abort. Most callers do that, the commit before
previous fixed one that didn't (and got the error handling wrong), and
the two remaining exceptions ignore errors.
Drop the @errp parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
The tests' "qemu-dummy" device has only class properties. Turn one of
them into an instance property. test_dummy_class_iterator() expects
one fewer property than test_dummy_iterator(). Rewrite
test_dummy_prop_iterator() to take expected properties as argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-9-armbru@redhat.com>
The test checks fulfilling qcow2 requirements for the compression
type feature and zstd compression type operability.
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200507082521.29210-5-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
055 uses the backup block job to create a compressed backup of an
$IMGFMT image with both qcow2 and vmdk targets. However, cluster
allocation in vmdk is very slow because it flushes the image file after
each L2 update.
There is no reason why we need this level of safety in this test, so
let's disable flushes for vmdk. For the blockdev-backup tests this is
achieved by simply adding the cache.no-flush=on to the drive_add() for
the target. For drive-backup, the caching flags are copied from the
source node, so we'll also add the flag to the source node, even though
it is not vmdk.
This can make the test run significantly faster (though it doesn't make
a difference on tmpfs). In my usual setup it goes from ~45s to ~15s.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200505064618.16267-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests that the backup job catches situations where the target node
has a different size than the source node. It must also forbid resize
operations when the job is already running.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430142755.315494-5-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test case forgot to specify the null-co size for the target node.
When adding a check to backup that both sizes match, this would fail
because of the size mismatch and not the behaviour that the test really
wanted to test.
Fixes: a541fcc27c
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430142755.315494-2-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to avoid bitrot in the zero cluster code in VMDK, enable
zeroed_grain=on by default for the tests.
059 now unsets the default options because zeroed_grain=on works only
with some subformats and the test case tests many different subformats,
including those for which it doesn't work.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-7-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After commit f01643fb8b when an image is
extended and BDRV_REQ_ZERO_WRITE is set then the new clusters are
zeroized.
The code however does not detect correctly situations when the old and
the new end of the image are within the same cluster. The problem can
be reproduced with these steps:
qemu-img create -f qcow2 backing.qcow2 1M
qemu-img create -f qcow2 -F qcow2 -b backing.qcow2 top.qcow2
qemu-img resize --shrink top.qcow2 520k
qemu-img resize top.qcow2 567k
In the last step offset - zero_start causes an integer wraparound.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200504155217.10325-1-berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-9-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-8-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-7-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of looping in each test, let's better refactor vmdk target case
as a subclass.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-6-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drop check for no block-jobs: it's obvious that there no jobs
immediately after vm.launch().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Skip test-case with quorum if quorum is not whitelisted.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-4-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test fails if bochs not whitelisted, so, skip it in this case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some tests requires O_DIRECT, or want it by default. Introduce smarter
O_DIRECT handling:
- Check O_DIRECT in common.rc, if it is requested by selected
cache-mode.
- Support second fall-through argument in _default_cache_mode
Inspired-by: Max's 23e1d05411
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Extend the hash benchmark so that it can validate all algorithms
supported by QEMU instead of being limited to sha256.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
- travis: drop macosx, tweak ppc64 native
- cirrus: fix FreeBSD, guard against future breakage
- gdbstub: support socket debug for linux-user
- gdbstub: add multiarch tests
- gdbstub: fixes for m68k
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl6ydk0ACgkQ+9DbCVqe
KkTcKQf+M+5B0HQsLVW5Z/n7zIL4v5LNRwtOt+a1zBusDgAUIsWKvfSpezk8ddCB
hr1qIgN9jdi3OfR/HDPTwqd++n+t7HTCadL4tO7to2iKRzdpM0oDbjo2+hgSNSX4
L5Nv79eEr1askD5rWq6QJZqJpeversvp2vvJcgJU4ukjsv7eTSfEW5iDS0DhOlx3
KM3prMY36KEYvch6yFwEatA7qerc08K06xi9M5Z2ZAjm5qKVNeC3tVkZSyxmubBn
LvmWt6zN/eHEUYM9qK+e9fAVhcreGNTJ7d2uB4XI+dA3tQOUXgdDKruxMc3rhoWZ
JlB2Tipj3R2I3fVJwwSAnpmxV+xZ4g==
=Uy3H
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-gdbstub-060520-1' into staging
Testing and gdbstub updates:
- travis: drop macosx, tweak ppc64 native
- cirrus: fix FreeBSD, guard against future breakage
- gdbstub: support socket debug for linux-user
- gdbstub: add multiarch tests
- gdbstub: fixes for m68k
# gpg: Signature made Wed 06 May 2020 09:33:17 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-gdbstub-060520-1:
target/m68k: fix gdb for m68xxx
tests/tcg: add a multiarch linux-user gdb test
tests/guest-debug: use the unix socket for linux-user tests
gdbstub/linux-user: support debugging over a unix socket
gdbstub: eliminate gdbserver_fd global
tests/tcg: drop inferior.was_attached() test
tests/tcg: better trap gdb failures
gdbstub: Introduce gdb_get_float64() to get 64-bit float registers
configure: favour gdb-multiarch if we have it
.travis.yml: reduce the load on [ppc64] GCC check-tcg
.cirrus.yml: bootstrap pkg unconditionally
.cirrus.yml: bump FreeBSD to the current stable release
.travis.yml: drop MacOSX
.travis.yml: show free disk space at end of run
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the gdbstub code was converted to the new API we missed a few
snafus in the various guests. Add a simple gdb test script which can
be used on all our linux-user guests to check for obvious failures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200430190122.4592-9-alex.bennee@linaro.org>
Now we have support for debugging over a unix socket for linux-user
lets use it in our test harness.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200430190122.4592-8-alex.bennee@linaro.org>
This test seems flaky and reports attachment even when we failed to
negotiate the architecture. However the fetching of the guest
architecture will fail tripping up the gdb AttributeError which will
trigger our early no error status exit from the test
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200430190122.4592-5-alex.bennee@linaro.org>
It seems older and non-multiarach aware GDBs might not fail gracefully
when faced with something they don't know. For example when faced with
a target XML for s390x the Ubuntu 18.04 gdb will generate an internal
fault and prompt for a core dump.
Work around this by invoking GDB in a more batch orientated way and
then trying to filter out between test failures and gdb failures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200430190122.4592-4-alex.bennee@linaro.org>
- reduce client-side fragmentation of NBD trim and status requests
- fix iotest 41 when run in deep tree
- fix socket activation in qemu-nbd
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAl6whTUACgkQp6FrSiUn
Q2r4nAf7BtGSFMkUu6nWYeq+Ggg+Xwmz2FLAzWTK/rccGDC44c9ETzOIbWEddo6X
FHpU07VXdLW1h2M7ox8lQVo0DZEFxTRBYTPtUtjB7izfkAs4CkYeElJsZAPAZKgU
GsKqa3RM6uXubsQaXXXjMFCGlYgqi1dVkmkgtPebt7evSe0ATlTfYfd0y9gb5f9C
cbHD3CVcGKQe4ZtNcSBpTzOvXJSrBZznyCyhBO2qmVXTynt/5Ygog+Ulq3DHZsPX
UkRkTPohKA0BhXuS7wD49danlzCLiTlvswr62fAncM1+AJTbmIa+apy3SwiOkwMh
Aawq5vDtaFV+HEBKbMC0QRhgtoEe1w==
=ExlI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2020-05-04' into staging
nbd patches for 2020-05-04
- reduce client-side fragmentation of NBD trim and status requests
- fix iotest 41 when run in deep tree
- fix socket activation in qemu-nbd
# gpg: Signature made Mon 04 May 2020 22:12:21 BST
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2020-05-04:
block/nbd-client: drop max_block restriction from discard
block/nbd-client: drop max_block restriction from block_status
iotests/041: Fix NBD socket path
tools: Fix use of fcntl(F_SETFD) during socket activation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit f62514b3de made qemu-img reject -o "" but this test uses it.
Since this test only tries to do a dry-run run of qemu-img amend,
replace the -o "" with dummy -o "size=$size".
Fixes: f62514b3de
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200504131959.9533-1-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's been a while since we got rid of the sector-based bdrv_read and
bdrv_write (commit 2e11d756); let's finish the job on a few remaining
comments.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428213807.776655-1-eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We originally refused to allow resize of images with internal
snapshots because the v2 image format did not require the tracking of
snapshot size, making it impossible to safely revert to a snapshot
with a different size than the current view of the image. But the
snapshot size tracking was rectified in v3, and our recent fixes to
qemu-img amend (see 0a85af35) guarantee that we always have a valid
snapshot size. Thus, we no longer need to artificially limit image
resizes, but it does become one more thing that would prevent a
downgrade back to v2. And now that we support different-sized
snapshots, it's also easy to fix reverting to a snapshot to apply the
new size.
Upgrade iotest 61 to cover this (we previously had NO coverage of
refusal to resize while snapshots exist). Note that the amend process
can fail but still have effects: in particular, since we break things
into upgrade, resize, downgrade, a failure during resize does not roll
back changes made during upgrade, nor does failure in downgrade roll
back a resize. But this situation is pre-existing even without this
patch; and without journaling, the best we could do is minimize the
chance of partial failure by collecting all changes prior to doing any
writes - which adds a lot of complexity but could still fail with EIO.
On the other hand, we are careful that even if we have partial
modification but then fail, the image is left viable (that is, we are
careful to sequence things so that after each successful cluster
write, there may be transient leaked clusters but no corrupt
metadata). And complicating the code to make it more transaction-like
is not worth the effort: a user can always request multiple 'qemu-img
amend' changing one thing each, if they need finer-grained control
over detecting the first failure than what they get by letting qemu
decide how to sequence multiple changes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200428192648.749066-3-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We can turn logging on/off globally instead of per-function.
Remove use_log from run_job, and use python logging to turn on
diffable output when we run through a script entry point.
iotest 245 changes output order due to buffering reasons.
An extended note on python logging:
A NullHandler is added to `qemu.iotests` to stop output from being
generated if this code is used as a library without configuring logging.
A NullHandler is only needed at the root, so a duplicate handler is not
needed for `qemu.iotests.diff_io`.
When logging is not configured, messages at the 'WARNING' levels or
above are printed with default settings. The NullHandler stops this from
occurring, which is considered good hygiene for code used as a library.
See https://docs.python.org/3/howto/logging.html#library-config
When logging is actually enabled (always at the behest of an explicit
call by a client script), a root logger is implicitly created at the
root, which allows messages to propagate upwards and be handled/emitted
from the root logger with default settings.
When we want iotest logging, we attach a handler to the
qemu.iotests.diff_io logger and disable propagation to avoid possible
double-printing.
For more information on python logging infrastructure, I highly
recommend downloading the pip package `logging_tree`, which provides
convenient visualizations of the hierarchical logging configuration
under different circumstances.
See https://pypi.org/project/logging_tree/ for more information.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-15-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Mark the verify functions as "private" with a leading underscore, to
discourage their use. Update type signatures while we're here.
(Also, make pending patches not yet using the new entry points fail in a
very obvious way.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200331000014.11581-14-jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Since this one is nicely factored to use a single entry point,
use script_main to run the tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-13-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Like script_main, but doesn't require a single point of entry.
Replace all existing initialization sections with this drop-in replacement.
This brings debug support to all existing script-style iotests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-12-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
[mreitz: Give 274 the same treatment]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Minor cleanup for HMP functions; helps with line length and consolidates
HMP helpers through one implementation function.
Although we are adding a universal toggle to turn QMP logging on or off,
many existing callers to hmp functions don't expect that output to be
logged, which causes quite a few changes in the test output.
For now, offer a use_log parameter.
Typing notes:
QMPResponse is just an alias for Dict[str, Any]. It holds no special
meanings and it is not a formal subtype of Dict[str, Any]. It is best
thought of as a lexical synonym.
We may well wish to add stricter subtypes in the future for certain
shapes of data that are not formalized as Python objects, at which point
we can simply retire the alias and allow mypy to more strictly check
usages of the name.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200331000014.11581-11-jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
79 is the PEP8 recommendation. This recommendation works well for
reading patch diffs in TUI email clients.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-10-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Representing nested, recursive data structures in mypy is notoriously
difficult; the best we can reliably do right now is denote the leaf
types as "Any" while describing the general shape of the data.
Regardless, this fully annotates the log() function.
Typing notes:
TypeVar is a Type variable that can optionally be constrained by a
sequence of possible types. This variable is bound to a specific type
per-invocation, like a Generic.
log() behaves as log<Msg>() now, where the incoming type informs the
signature it expects for any filter arguments passed in. If Msg is a
str, then filter should take and return a str.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-9-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We no longer need to accommodate <3.4, drop this code.
(The lines were > 79 chars and it stood out.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-8-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
I had to fix a merge conflict, so do this tiny harmless thing while I'm
here.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-7-jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This allows others to get repeatable results with pylint. If you run
`pylint iotests.py`, you should see a 100% pass.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-6-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's bad hygiene: if we modify this list, it will be modified across all
invocations.
(Remaining bad usages are fixed in a subsequent patch which changes the
function signature anyway.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-5-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The right way to solve this is to come up with a virtual environment
infrastructure that sets all the paths correctly, and/or to create
installable python modules that can be imported normally.
That's hard, so just silence this error for now.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200331000014.11581-4-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It shadows (with a different type) the built-in format.
Use something else.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-3-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This doesn't fix everything in here, but it does help clean up the
pylint report considerably.
This should be 100% style changes only; the intent is to make pylint
more useful by working on establishing a baseline for iotests that we
can gate against in the future.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-2-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We should put all UNIX socket files into the sock_dir, not test_dir.
Reported-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424134626.78945-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Fixes: a1da187860
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The fuzzers are built into a binary (e.g. qemu-fuzz-i386). To select the
device to fuzz/fuzz target, we usually use the --fuzz-target= argument.
This commit allows the fuzz-target to be specified using the name of the
executable. If the executable name ends with -target-FUZZ_TARGET, then
we select the fuzz target based on this name, rather than the
--fuzz-target argument. This is useful for systems such as oss-fuzz
where we don't have control of the arguments passed to the fuzzer.
[Fixed incorrect indentation.
--Stefan]
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200421182230.6313-1-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is done as a preparation for the following patch to expose WAET
ACPI table to guest.
This patch performs steps 1-3 as describes in
tests/qtest/bios-tables-test.c.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200313145009.144820-2-liran.alon@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Because of the following changes, the expeacted tables for bios-tables-test
needs to be updated.
1. Changed NVDIM DSM output buffer AML code.
2. Updated arm/virt test_acpi_virt_tcg_memhp() to add pc-dimm/nvdimm
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-Id: <20200421125934.14952-8-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since we now have both pc-dimm and nvdimm support, update
test_acpi_virt_tcg_memhp() to include those.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-Id: <20200421125934.14952-7-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is in preparation to update test_acpi_virt_tcg_memhp()
with pc-dimm and nvdimm. Update the bios-tables-test-allowed-diff.h
with the affected ACPI tables so that "make check" doesn't fail.
Also add empty files for new tables required for new test.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-Id: <20200421125934.14952-6-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As per ACPI spec 6.3, Table 19-419 Object Conversion Rules, if
the Buffer Field <= to the size of an Integer (in bits), it will
be treated as an integer. Moreover, the integer size depends on
DSDT tables revision number. If revision number is < 2, integer
size is 32 bits, otherwise it is 64 bits. Current NVDIMM common
DSM aml code (NCAL) uses CreateField() for creating DSM output
buffer. This creates an issue in arm/virt platform where DSDT
revision number is 2 and results in DSM buffer with a wrong
size(8 bytes) gets returned when actual length is < 8 bytes.
This causes guest kernel to report,
"nfit ACPI0012:00: found a zero length table '0' parsing nfit"
In order to fix this, aml code is now modified such that it builds
the DSM output buffer in a byte by byte fashion when length is
smaller than Integer size.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200421125934.14952-2-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit f6595976e699 ("acpi: drop pointless _STA method") replaced
_STA method with simple name object. Update DSDT accordingly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200429140003.7336-4-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Fix resize (extending) of short overlays
- nvme: introduce PMR support from NVMe 1.4 spec
- qemu-storage-daemon: Fix non-string --object properties
-----BEGIN PGP SIGNATURE-----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=ad71
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Fix resize (extending) of short overlays
- nvme: introduce PMR support from NVMe 1.4 spec
- qemu-storage-daemon: Fix non-string --object properties
# gpg: Signature made Thu 30 Apr 2020 16:51:45 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
qemu-storage-daemon: Fix non-string --object properties
qom: Factor out user_creatable_add_dict()
nvme: introduce PMR support from NVMe 1.4 spec
qcow2: Forward ZERO_WRITE flag for full preallocation
iotests: Test committing to short backing file
iotests: Filter testfiles out in filter_img_info()
block: truncate: Don't make backing file data visible
file-posix: Support BDRV_REQ_ZERO_WRITE for truncate
raw-format: Support BDRV_REQ_ZERO_WRITE for truncate
qcow2: Support BDRV_REQ_ZERO_WRITE for truncate
block-backend: Add flags to blk_truncate()
block: Add flags to bdrv(_co)_truncate()
block: Add flags to BlockDriver.bdrv_co_truncate()
qemu-iotests: allow qcow2 external discarded clusters to contain stale data
qcow2: Add incompatibility note between backing files and raw external data files
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The BDRV_REQ_ZERO_WRITE is currently implemented in a way that first the
image is possibly preallocated and then the zero flag is added to all
clusters. This means that a copy-on-write operation may be needed when
writing to these clusters, despite having used preallocation, negating
one of the major benefits of preallocation.
Instead, try to forward the BDRV_REQ_ZERO_WRITE to the protocol driver,
and if the protocol driver can ensure that the new area reads as zeros,
we can skip setting the zero flag in the qcow2 layer.
Unfortunately, the same approach doesn't work for metadata
preallocation, so we'll still set the zero flag there.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424142701.67053-1-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200424125448.63318-10-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to keep TEST_IMG for the full path of the main test image, but
filter_testfiles() must be called for other test images before replacing
other things like the image format because the test directory path could
contain the format as a substring.
Insert a filter_testfiles() call between both.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200424125448.63318-9-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that block drivers can support flags for .bdrv_co_truncate, expose
the parameter in the node level interfaces bdrv_co_truncate() and
bdrv_truncate().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a new BdrvRequestFlags parameter to the .bdrv_co_truncate()
driver callbacks, and a supported_truncate_flags field in
BlockDriverState that allows drivers to advertise support for request
flags in the context of truncate.
For now, we always pass 0 and no drivers declare support for any flag.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 244 checks the expected behavior of qcow2 external data files
with respect to zero and discarded clusters. Filesystems however
are free to ignore discard requests, and this seems to be the
case for overlayfs. Relax the tests to skip checks on the
external data file for discarded areas, which implies not using
qemu-img compare in the data_file_raw=on case.
This fixes docker tests on RHEL8.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200409191006.24429-1-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add functions to easily handle clocks with devices.
Clock inputs and outputs should be used to handle clock propagation
between devices.
The API is very similar the GPIO API.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200406135251.157596-4-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In addition to simple serial test this patch uses ping
to test the ethernet block modelled in SmartFusion2 SoC.
Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1587048891-30493-4-git-send-email-sundeep.lkml@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
output_type_enum() fails when *obj is not a valid value of the enum
type. Should not happen. Drop the check, along with its unit tests.
This unmasks qapi_enum_lookup()'s assertion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-9-armbru@redhat.com>
[Commit message tweaked]
qlist_iter() has just three uses outside tests/. Replace by
QLIST_FOREACH_ENTRY() for more concise code and less type punning.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424071142.3525-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
apply_to_qlist(), apply_to_node() work with QObjects. This is
designed for use by tests/qtest/qos-test.c, which gets the data in
that form via QMP. Goes back to commit fc281c8020 "tests: qgraph API
for the qtest driver framework".
Commit 275ab39d86 "fuzz: add support for qos-assisted fuzz targets"
added another user: qtest/fuzz/qos_fuzz.c. To get the data as
QObjects, it uses qmp_marshal_query_machines() and
qmp_marshal_qom_list_types().
All this code is rather cumbersome. Switch to working with generated
QAPI types instead:
* Replace apply_to_qlist() & friends by machines_apply_to_node() and
types_apply_to_node().
* Have qos_fuzz.c use qmp_query_machines() and qmp_qom_list_types()
instead.
* Have qos_test.c convert from QObject to the QAPI types.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424071142.3525-3-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200415074927.19897-6-armbru@redhat.com>
has_help_option() uses its own parser. It's inconsistent with
qemu_opts_parse(), as demonstrated by test-qemu-opts case
/qemu-opts/has_help_option. Fix by reusing the common parser.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415074927.19897-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200415074927.19897-4-armbru@redhat.com>
The two turn out to be inconsistent for "a,b,,help". Test case
marked /* BUG */.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415074927.19897-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The test-misc docker test fails on a number of images which don't have
the prerequisites to build the docs. Use the FEATURES flag so we can
skip those tests.
As the sphinx test fails to detect whatever feature we need to get
hxtool to work we drop them from debian9 so the windows build doesn't
attempt to build the docs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200414200631.12799-7-alex.bennee@linaro.org>
Cannibalize one backend in the HMAT test to make sure that
prealloc=y is tested.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200325094423.24293-3-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With QEMU 4.0 an incompatible change was added to pc_piix, which makes it
practical impossible to migrate domUs started with qemu2 or qemu3 to
newer qemu versions. Commit 7fccf2a068
added and enabled a new member "smbus_no_migration_support". In commit
4ab2f2a8aa the vmstate_acpi got new
elements, which are conditionally filled. As a result, an incoming
migration expected smbus related data unless smbus migration was
disabled for a given MachineClass. Since first commit forgot to handle
'xenfv', domUs started with QEMU 4.x are incompatible with their QEMU
siblings.
Using other existing machine types, such as 'pc-i440fx-3.1', is not
possible because 'xenfv' creates the 'xen-platform' PCI device at
00:02.0, while all other variants to run a domU would create it at
00:04.0.
To cover both the existing and the broken case of 'xenfv' in a single
qemu binary, a new compatibility variant of 'xenfv-4.2' must be added
which targets domUs started with qemu 4.2. The existing 'xenfv' restores
compatibility of QEMU 5.x with qemu 3.1.
Host admins who started domUs with QEMU 4.x (preferrable QEMU 4.2)
have to use a wrapper script which appends '-machine xenfv-4.2' to
the device-model command line. This is only required if there is no
maintenance window which allows to temporary shutdown the domU and
restart it with a fixed device-model.
The wrapper script is as simple as this:
#!/bin/sh
exec /usr/bin/qemu-system-i386 "$@" -machine xenfv-4.2
With xl this script will be enabled with device_model_override=, see
xl.cfg(5). To live migrate a domU, adjust the existing domU.cfg and pass
it to xl migrate or xl save/restore:
xl migrate -C new-domU.cfg domU remote-host
xl save domU CheckpointFile new-domU.cfg
xl restore new-domU.cfg CheckpointFile
With libvirt this script will be enabled with the <emulator> element in
domU.xml. Use 'virsh edit' prior 'virsh migrate' to replace the existing
<emulator> element to point it to the wrapper script.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Message-Id: <20200327151841.13877-1-olaf@aepfle.de>
[Adjust tests for blacklisted machine types, simplifying the one in
qom-test. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix crashes and hangs related to iothreads, bdrv_drain and block jobs:
- Fix some AIO context locking in jobs
- Fix blk->in_flight during blk_wait_while_drained()
- vpc: Don't round up already aligned BAT sizes
-----BEGIN PGP SIGNATURE-----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=oODf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Fix crashes and hangs related to iothreads, bdrv_drain and block jobs:
- Fix some AIO context locking in jobs
- Fix blk->in_flight during blk_wait_while_drained()
- vpc: Don't round up already aligned BAT sizes
# gpg: Signature made Tue 07 Apr 2020 15:25:24 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
vpc: Don't round up already aligned BAT sizes
block: Fix blk->in_flight during blk_wait_while_drained()
block: Increase BB.in_flight for coroutine and sync interfaces
block-backend: Reorder flush/pdiscard function definitions
backup: don't acquire aio_context in backup_clean
replication: assert we own context before job_cancel_sync
job: take each job's lock individually in job_txn_apply
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are not using them and they just get in the way.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200403191150.863-4-alex.bennee@linaro.org>
All callers of job_txn_apply hold a single job's lock, but different
jobs within a transaction can have different contexts, thus we need to
lock each one individually before applying the callback function.
Similar to job_completed_txn_abort this also requires releasing the
caller's context before and reacquiring it after to avoid recursive
locks which might break AIO_WAIT_WHILE in the callback. This is safe, since
existing code would already have to take this into account, lest
job_completed_txn_abort might have broken.
This also brings to light a different issue: When a callback function in
job_txn_apply moves it's job to a different AIO context, callers will
try to release the wrong lock (now that we re-acquire the lock
correctly, previously it would just continue with the old lock, leaving
the job unlocked for the rest of the return path). Fix this by not caching
the job's context.
This is only necessary for qmp_block_job_finalize, qmp_job_finalize and
job_exit, since everyone else calls through job_exit.
One test needed adapting, since it calls job_finalize directly, so it
manually needs to acquire the correct context.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Message-Id: <20200407115651.69472-2-s.reiter@proxmox.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
From time to time, my shell decides to repace the bracketed numbers here
by the numbers inside (i.e., "=== Clusters to be compressed [1]" is
printed as "=== Clusters to be compressed 1"). That makes tests that
use common.pattern fail. Prevent that from happening by quoting the
arguments to all echos in common.pattern.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200403101134.805871-1-mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Various qemu-img commands are inconsistent on whether they report
status/errors in terms of bytes or sector offsets. The latter is
confusing (especially as more places move to 4k block sizes), so let's
switch everything to just use bytes everywhere. One iotest is
impacted.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200402135717.476398-1-eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
A discard request deallocates the selected clusters so they read back
as zeroes. This is done by clearing the cluster offset field and
setting QCOW_OFLAG_ZERO in the L2 entry.
This flag is however only supported when qcow_version >= 3. In older
images the cluster is simply deallocated, exposing any possible stale
data from the backing file.
Since discard is an advisory operation it's safer to simply forbid it
in this scenario.
Note that we are adding this check to qcow2_co_pdiscard() and not to
qcow2_cluster_discard() or discard_in_l2_slice() because the last
two are also used by qcow2_snapshot_create() to discard the clusters
used by the VM state. In this case there's no risk of exposing stale
data to the guest and we really want that the clusters are always
discarded.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200331114345.29993-1-berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test was written/tested around beginning of 2019, but was
extracted from a bigger series and posted end of June 2019 [*].
Unfortunately I did not notice commit 162abf1a8 was merged by
then, which implements the AHB and APB plug and play devices.
HelenOS 0.6 is expecting the PnP registers to be not implemented
by QEMU, then forces the discovered AMBA devices (see [2]).
Before 162abf1a8, the console was displaying:
HelenOS bootloader, release 0.6.0 (Elastic Horse)
Built on 2014-12-21 20:17:42 for sparc32
Copyright (c) 2001-2014 HelenOS project
0x4000bf20|0x4000bf20: kernel image (496640/128466 bytes)
0x4002b4f2|0x4002b4f2: ns image (154195/66444 bytes)
0x4003b87e|0x4003b87e: loader image (153182/66437 bytes)
0x4004bc03|0x4004bc03: init image (155339/66834 bytes)
0x4005c115|0x4005c115: locsrv image (162063/70267 bytes)
0x4006d390|0x4006d390: rd image (152678/65889 bytes)
0x4007d4f1|0x4007d4f1: vfs image (168480/73394 bytes)
0x4008f3a3|0x4008f3a3: logger image (158034/68368 bytes)
0x4009feb3|0x4009feb3: ext4fs image (234510/100301 bytes)
0x400b8680|0x400b8680: initrd image (8388608/1668901 bytes)
ABMA devices:
<1:00c> at 0x80000100 irq 3
<1:00d> at 0x80000200
<1:011> at 0x80000300 irq 8
Memory size: 64 MB
As of this commit, it is now confused:
ABMA devices:
<1:3000> at 0x00000000 irq 0
<1:3000> at 0x00000000 irq 0
<1:3000> at 0x00000000 irq 0
<1:3000> at 0x00000000 irq 0
<1:3000> at 0x00000000 irq 0
<1:3000> at 0x00000000 irq 0
<1:3000> at 0x00000000 irq 0
...
As this test is not working as expected, simply disable it (by
skipping it) for now.
[1] https://www.mail-archive.com/qemu-devel@nongnu.org/msg627094.html
[2] https://github.com/HelenOS/helenos/blob/0.6.0/boot/arch/sparc32/src/ambapp.c#L75
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200331105048.27989-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
To avoid regular failures on Travis-CI with ftp.software.ibm.com,
use a mirror.
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Willian Rampazzo <willianr@gmail.com>
Reviewed-by: Willian Rampazzo <willianr@gmail.com>
Message-Id: <20200403172919.24621-4-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use NetBSD content delivery network to get faster downloads.
Suggested-by: Kamil Rytarowski <kamil@netbsd.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200211134504.9156-1-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The exec migration test isn't run a whole test scenario.
This patch fixes it
Fixes: 2e768cb682
Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200325113138.20337-1-ovoshcha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The tulip networking card emulation has an OOB issue in
'tulip_copy_tx_buffers' when the guest provide malformed descriptor.
This test will trigger a ASAN heap overflow crash. To trigger this
issue we can construct the data as following:
1. construct a 'tulip_descriptor'. Its control is set to
'0x7ff | 0x7ff << 11', this will make the 'tulip_copy_tx_buffers's
'len1' and 'len2' to 0x7ff(2047). So 'len1+len2' will overflow
'TULIPState's 'tx_frame' field. This descriptor's 'buf_addr1' and
'buf_addr2' should set to a guest address.
2. write this descriptor to tulip device's CSR4 register. This will
set the 'TULIPState's 'current_tx_desc' field.
3. write 'CSR6_ST' to tulip device's CSR6 register. This will trigger
'tulip_xmit_list_update' and finally calls 'tulip_copy_tx_buffers'.
Following shows the backtrack of crash:
==31781==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x628000007cd0 at pc 0x7fe03c5a077a bp 0x7fff05b46770 sp 0x7fff05b45f18
WRITE of size 2047 at 0x628000007cd0 thread T0
#0 0x7fe03c5a0779 (/usr/lib/x86_64-linux-gnu/libasan.so.4+0x79779)
#1 0x5575fb6daa6a in flatview_read_continue /home/test/qemu/exec.c:3194
#2 0x5575fb6daccb in flatview_read /home/test/qemu/exec.c:3227
#3 0x5575fb6dae66 in address_space_read_full /home/test/qemu/exec.c:3240
#4 0x5575fb6db0cb in address_space_rw /home/test/qemu/exec.c:3268
#5 0x5575fbdfd460 in dma_memory_rw_relaxed /home/test/qemu/include/sysemu/dma.h:87
#6 0x5575fbdfd4b5 in dma_memory_rw /home/test/qemu/include/sysemu/dma.h:110
#7 0x5575fbdfd866 in pci_dma_rw /home/test/qemu/include/hw/pci/pci.h:787
#8 0x5575fbdfd8a3 in pci_dma_read /home/test/qemu/include/hw/pci/pci.h:794
#9 0x5575fbe02761 in tulip_copy_tx_buffers hw/net/tulip.c:585
#10 0x5575fbe0366b in tulip_xmit_list_update hw/net/tulip.c:678
#11 0x5575fbe04073 in tulip_write hw/net/tulip.c:783
Signed-off-by: Li Qiang <liq3ea@163.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Install optional dependencies of QEMU to get better coverage.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200322120104.21267-5-philmd@redhat.com>
Message-Id: <20200323161514.23952-11-alex.bennee@linaro.org>
The Python2 PyYAML is now pointless, switch to the Python3 version.
Fixes: bcbf27947 (docker: move tests from python2 to python3)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200322120104.21267-4-philmd@redhat.com>
Message-Id: <20200323161514.23952-10-alex.bennee@linaro.org>
In commit 6f8bbb374b we enabled building with the gcrypt library
on the the Debian 'x86 host', which was based on Debian Stretch.
Later in commit 698a71edbe we upgraded the Debian base image to
Buster.
Apparently Debian Stretch was listing gcrypt as a QEMU dependency,
but this is not the case anymore in Buster, so we need to install
it manually (it it not listed by 'apt-get -s build-dep qemu' in
the common debian10.docker anymore). This fixes:
$ ../configure $QEMU_CONFIGURE_OPTS
ERROR: User requested feature gcrypt
configure was not able to find it.
Install gcrypt devel >= 1.5.0
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200322120104.21267-3-philmd@redhat.com>
Message-Id: <20200323161514.23952-9-alex.bennee@linaro.org>
Keep package list sorted, this eases rebase/cherry-pick.
Fixes: 3a6784813
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200322120104.21267-2-philmd@redhat.com>
Message-Id: <20200323161514.23952-8-alex.bennee@linaro.org>
When the patch was merged it was part of a longer series which had
already merged the config changes. Semu-revert the config related
changes for now so things will build.
Fixes: b081986c85
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200323161514.23952-6-alex.bennee@linaro.org>
The installer supports GPT now, so the install workflow has changed a
bit. Also: run without VGA device. This works around a bug in the
seabios sercon code and makes the bootloader menu show up on the serial
line, so we can drop the quirk for that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200310083218.26355-5-kraxel@redhat.com>
Message-Id: <20200323161514.23952-5-alex.bennee@linaro.org>
Move '-device VGA' from basevm.py to the guests, so they have
the chance to opt out and run without display device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200310083218.26355-3-kraxel@redhat.com>
Message-Id: <20200323161514.23952-3-alex.bennee@linaro.org>
Run "tail -f /var/tmp/*/qemu*console.raw" in another terminal
to watch the install console.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200310083218.26355-2-kraxel@redhat.com>
Message-Id: <20200323161514.23952-2-alex.bennee@linaro.org>
Test that qemu-img check reports the number of leaks and corruptions
fixed in its JSON report (after a successful run).
While touching the _unsupported_imgopts line, adjust the note on why
data_file does not work with this test: The current comment sounds a bit
like it is a mistake for qemu-img check not to check external data
files' refcounts. But there are no such refcounts, so it is no mistake.
Just say that qemu-img check does not do much for external data files,
and this is why this test does not work with them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200324172757.1173824-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Similarly to peek_file_[bl]e, we may want to write binary integers into
a file. Currently, this often means messing around with poke_file and
raw binary strings. I hope these functions make it a bit more
comfortable.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Code-suggested-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200324172757.1173824-3-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
As the feature name table can be quite large (over 9k if all 64 bits
of all three feature fields have names; a mere 8 features leaves only
8 bytes for a backing file name in a 512-byte cluster), it is unwise
to emit this optional header in images with small cluster sizes.
Update iotest 036 to skip running on small cluster sizes; meanwhile,
note that iotest 061 never passed on alternative cluster sizes
(however, I limited this patch to tests with output affected by adding
feature names, rather than auditing for other tests that are not
robust to alternative cluster sizes).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200324174233.1622067-4-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The feature table is supposed to advertise the name of all feature
bits that we support; however, we forgot to update the table for
autoclear bits. While at it, move the table to read-only memory in
code, and tweak the qcow2 spec to name the second autoclear bit.
Update iotests that are affected by the longer header length.
Fixes: 88ddffae
Fixes: 93c24936
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324174233.1622067-3-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When using max-bandwidth=~100Mb/s, this test fails on Travis-CI
s390x when configured with --disable-tcg:
$ make check-qtest
TEST check-qtest-s390x: tests/qtest/boot-serial-test
qemu-system-s390x: -accel tcg: invalid accelerator tcg
qemu-system-s390x: falling back to KVM
TEST check-qtest-s390x: tests/qtest/pxe-test
TEST check-qtest-s390x: tests/qtest/test-netfilter
TEST check-qtest-s390x: tests/qtest/test-filter-mirror
TEST check-qtest-s390x: tests/qtest/test-filter-redirector
TEST check-qtest-s390x: tests/qtest/drive_del-test
TEST check-qtest-s390x: tests/qtest/device-plug-test
TEST check-qtest-s390x: tests/qtest/virtio-ccw-test
TEST check-qtest-s390x: tests/qtest/cpu-plug-test
TEST check-qtest-s390x: tests/qtest/migration-test
**
ERROR:tests/qtest/migration-test.c:1229:test_migrate_auto_converge: 'got_stop' should be FALSE
ERROR - Bail out! ERROR:tests/qtest/migration-test.c:1229:test_migrate_auto_converge: 'got_stop' should be FALSE
make: *** [tests/Makefile.include:633: check-qtest-s390x] Error 1
Per David Gilbert, "it could just be the writing is slow on s390
and the migration thread fast; in which case the autocomplete
wouldn't be needed. Perhaps we just need to reduce the bandwidth
limit."
Tuning the threshold by reducing the initial bandwidth makes the
autoconverge test pass.
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200323184015.11565-1-philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
data_file does not work with v2, and we probably want 026 to keep
working for v2 images. Thus, open a new file for v3-exclusive error
path test cases.
Fixes: 81311255f2
(“iotests/026: Test EIO on allocation in a data-file”)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311140707.1243218-1-mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some iotests leave behind some external data file when run for qcow2
with -o data_file. Fix that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200224171631.384314-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Waiting for only 1 second proved to be too short on a loaded system,
resulting in false positives when testing pull requests. Increase the
timeout a bit to make this less likely.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200313083617.8326-4-kwolf@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this, you can send SIGABRT to a hanging test case and you'll get a
Python stack trace so you know where it was hanging.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200313083617.8326-2-kwolf@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
architecture emulation, developed by Yoshinori Sato.
CI jobs results:
https://gitlab.com/philmd/qemu/pipelines/127886344https://travis-ci.org/github/philmd/qemu/builds/664579420
-----BEGIN PGP SIGNATURE-----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=mNmV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/target_renesas_rx-20200320' into staging
Introduce the architectural part of the Renesas RX
architecture emulation, developed by Yoshinori Sato.
CI jobs results:
https://gitlab.com/philmd/qemu/pipelines/127886344https://travis-ci.org/github/philmd/qemu/builds/664579420
# gpg: Signature made Fri 20 Mar 2020 10:27:32 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/target_renesas_rx-20200320:
Add rx-softmmu
target/rx: Dump bytes for each insn during disassembly
target/rx: Collect all bytes during disassembly
target/rx: Emit all disassembly in one prt()
target/rx: Use prt_ldmi for XCHG_mr disassembly
target/rx: Replace operand with prt_ldmi in disassembler
target/rx: Disassemble rx_index_addr into a string
target/rx: RX disassembler
target/rx: CPU definitions
target/rx: TCG helpers
target/rx: TCG translation
MAINTAINERS: Add entry for the Renesas RX architecture
hw/registerfields.h: Add 8bit and 16bit register macros
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Squashed patches from Richard Henderson modifying
qapi/common.json and tests/machine-none-test.c]
Message-Id: <20200224141923.82118-21-ysato@users.sourceforge.jp>
[PMD: Added @since 5.0 tag in SysEmuTarget]
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bug fixes:
* memory encryption: Disable mem merge
(Dr. David Alan Gilbert)
Features:
* New EPYC CPU definitions (Babu Moger)
* Denventon-v2 CPU model (Tao Xu)
* New 'note' field on versioned CPU models (Tao Xu)
Cleanups:
* x86 CPU topology cleanups (Babu Moger)
* cpu: Use DeviceClass reset instead of a special CPUClass reset
(Peter Maydell)
-----BEGIN PGP SIGNATURE-----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=9fEL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue for 5.0 soft freeze
Bug fixes:
* memory encryption: Disable mem merge
(Dr. David Alan Gilbert)
Features:
* New EPYC CPU definitions (Babu Moger)
* Denventon-v2 CPU model (Tao Xu)
* New 'note' field on versioned CPU models (Tao Xu)
Cleanups:
* x86 CPU topology cleanups (Babu Moger)
* cpu: Use DeviceClass reset instead of a special CPUClass reset
(Peter Maydell)
# gpg: Signature made Wed 18 Mar 2020 01:16:43 GMT
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-and-machine-pull-request:
hw/i386: Rename apicid_from_topo_ids to x86_apicid_from_topo_ids
hw/i386: Update structures to save the number of nodes per package
hw/i386: Remove unnecessary initialization in x86_cpu_new
machine: Add SMP Sockets in CpuTopology
hw/i386: Consolidate topology functions
hw/i386: Introduce X86CPUTopoInfo to contain topology info
cpu: Use DeviceClass reset instead of a special CPUClass reset
machine/memory encryption: Disable mem merge
hw/i386: Rename X86CPUTopoInfo structure to X86CPUTopoIDs
i386: Add 2nd Generation AMD EPYC processors
i386: Add missing cpu feature bits in EPYC model
target/i386: Add new property note to versioned CPU models
target/i386: Add Denverton-v2 (no MPX) CPU model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=DHn4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python and tests (mostly acceptance) patches 2020-03-17
# gpg: Signature made Wed 18 Mar 2020 00:16:03 GMT
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
tests/docker: make "buildah bud" output similar to "docker build"
tests/docker: add CentOS 8 Dockerfile
Acceptance tests: add make targets to download images
Acceptance test: add "boot_linux" tests
Acceptance tests: introduce BUILD_DIR and SOURCE_DIR
python/qemu/qmp.py: QMP debug with VM label
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+ber27ys35W+dsvQfe+BBqr8OQ4FAl5xW7kACgkQfe+BBqr8
OQ6x2w/9HAM9tyP65wMebkvvg29v6PeO65g81BOzdfcuyWhkZl0pWg6LjNfaN9a3
xin2MDB9ODOug8kBICeCGEzuJ/qe3wcXEkjnK4uklSk4YZDBIzgfVnC4N+3/pkMr
pvJM2GNHKk8PQI0YoBPZXwfvzN1CB03f0oaWokkpQq4XYLO6rltflPLwI33De5kx
igPA7rfRAz12PxP5xzhvVWfaD54xc9pFoQ8SSxrnUqr+3OWfV6+xovE5F7e1O6vw
x84rRod50tp4c9ABS0mY1kcdnFUKK1YXh+oRvtj9B5QbjYfZY+wvz8Iisgk3cB1s
CtKTvQSvbvBkdghecX5hHmeSerVKxjjMR8tnoS9A0eaTjfOuum2eBqS0Cf51C61O
UuMVHFVRyR8g+t0xcDbciPMGbS08UEVaXlibYU1tA8lr6EB1G4aHW1ZvdAsc/eeY
WrDPb9+QaItT9yL5U43s3/ABFMbHwqyJwdDgNEmet5L89voSGY8VfhDj7wesoQv4
rzCCeDnl1drFiKqiHSc0IrTc7ktpz7vpfh3mydaD52yj5/xmD/3fS5UpUk3kYDJp
JrN9npjnsbuLhdI63TrJPXXzdFqSiRiHaNlmiPtKm8ER/NowwpO5BUPSNLK4HIBX
QcgbcSjbdj1GgmmINPylzShyev9cBfigTks1uF1ln4XuN96S45Q=
=Q+Rb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging
Pull request
# gpg: Signature made Tue 17 Mar 2020 23:22:33 GMT
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jnsnow/tags/ide-pull-request:
hw/ide: Remove unneeded inclusion of hw/ide.h
hw/ide: Move MAX_IDE_DEVS define to hw/ide/internal.h
hw/ide: Do ide_drive_get() within pci_ide_create_devs()
hw/ide/pci.c: Coding style update to fix checkpatch errors
hw/ide: Remove now unneded #include "hw/pci/pci.h" from hw/ide.h
hw/ide: Get rid of piix4_init function
hw/isa/piix4.c: Introduce variable to store devfn
hw/ide: Get rid of piix3_init functions
hd-geo-test: Clean up use of buf[] in create_qcow2_with_mbr()
via-ide: always use legacy IRQ 14/15 routing
via-ide: allow guests to write to PCI_CLASS_PROG
via-ide: initialise IDE controller in legacy mode
via-ide: ensure that PCI_INTERRUPT_LINE is hard-wired to its default value
pci: Honour wmask when resetting PCI_INTERRUPT_LINE
ide/via: Get rid of via_ide_init()
via-ide: move registration of VMStateDescription to DeviceClass
cmd646: remove unused pci_cmd646_ide_init() function
dp264: use pci_create_simple() to initialise the cmd646 device
cmd646: register vmstate_ide_pci VMStateDescription in DeviceClass
cmd646: register cmd646_reset() function in DeviceClass
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=VWQB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-03-17' into staging
QAPI patches for 2020-03-17
# gpg: Signature made Tue 17 Mar 2020 20:50:54 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-03-17: (30 commits)
net: Track netdevs in NetClientState rather than QemuOpt
net: Complete qapi-fication of netdev_add
qmp: constify QmpCommand and list
qapi: Mark deprecated QMP parts with feature 'deprecated'
qapi: New special feature flag "deprecated"
qapi: Replace qmp_dispatch()'s TODO comment by an explanation
qapi: Simplify how qmp_dispatch() gets the request ID
qapi: Simplify how qmp_dispatch() deals with QCO_NO_SUCCESS_RESP
qapi: Inline do_qmp_dispatch() into qmp_dispatch()
qapi: Add feature flags to struct members
qapi/schema: Call QAPIDoc.connect_member() in just one place
qapi/schema: Rename QAPISchemaObjectType{Variant,Variants}
qapi/schema: Reorder classes so related ones are together
qapi/schema: Change _make_features() to a take feature list
qapi/introspect: Factor out _make_tree()
qapi/introspect: Rename *qlit* to reduce confusion
qapi: Consistently put @features parameter right after @ifcond
qapi: Add feature flags to remaining definitions
qapi/schema: Clean up around QAPISchemaEntity.connect_doc()
tests/test-qmp-event: Check event is actually emitted
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- docker updates for VirGL
- re-factor gdbstub for static GDBState
- re-factor gdbstub for dynamic arrays
- add SVE support to arm gdbstub
- add some guest debug tests to check-tcg
- add aarch64 userspace register tests
- remove packet size limit to gdbstub
- simplify gdbstub monitor code
- report vContSupported in gdbstub to use proper single-step
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl5xDUIACgkQ+9DbCVqe
KkQwCwf/YtmUsNxxO+CgNctq2u3jV4FoOdQP3bejvmT2+cigKJhQuBlWPg1/YsqF
RDNkmBQx2JaVVMuVmpnwVK1UD+kmYZqrtlOkPNcVrjPmLCq3BVI1LHe6Rjoerx8F
QoZyH0IMNHbBgDo1I46lSFOWcxmOvo+Ow7NX5bPKwlRzf0dyEqSJahRaZLAgUscR
taTtGfk9uQsnxoRsvH/efiQ4bZtUvrEQuhEX3WW/yVE1jTpcb2llwX4xONJb2It3
/0WREGEEIT8PpnWw2S3FH4THY/BjWgz/FPDwNNZYCKBMWDjuG/8KHryd738T9rzo
lkGP9YcXmiyxMMyFFwS8RD3SHr8LvQ==
=Wm+a
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1' into staging
Testing and gdbstub updates:
- docker updates for VirGL
- re-factor gdbstub for static GDBState
- re-factor gdbstub for dynamic arrays
- add SVE support to arm gdbstub
- add some guest debug tests to check-tcg
- add aarch64 userspace register tests
- remove packet size limit to gdbstub
- simplify gdbstub monitor code
- report vContSupported in gdbstub to use proper single-step
# gpg: Signature made Tue 17 Mar 2020 17:47:46 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1: (28 commits)
gdbstub: Fix single-step issue by confirming 'vContSupported+' feature to gdb
gdbstub: do not split gdb_monitor_write payload
gdbstub: change GDBState.last_packet to GByteArray
tests/tcg/aarch64: add test-sve-ioctl guest-debug test
tests/tcg/aarch64: add SVE iotcl test
tests/tcg/aarch64: add a gdbstub testcase for SVE registers
tests/guest-debug: add a simple test runner
configure: allow user to specify what gdb to use
tests/tcg/aarch64: userspace system register test
target/arm: don't bother with id_aa64pfr0_read for USER_ONLY
target/arm: generate xml description of our SVE registers
target/arm: default SVE length to 64 bytes for linux-user
target/arm: explicitly encode regnum in our XML
target/arm: prepare for multiple dynamic XMLs
gdbstub: extend GByteArray to read register helpers
target/i386: use gdb_get_reg helpers
target/m68k: use gdb_get_reg helpers
target/arm: use gdb_get_reg helpers
gdbstub: add helper for 128 bit registers
gdbstub: move mem_buf to GDBState and use GByteArray
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Firstly, _next_dirty_area is for scenarios when we may contiguously
search for next dirty area inside some limited region, so it is more
comfortable to specify "end" which should not be recalculated on each
iteration.
Secondly, let's add a possibility to limit resulting area size, not
limiting searching area. This will be used in NBD code in further
commit. (Note that now bdrv_dirty_bitmap_next_dirty_area is unused)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-8-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
We have bdrv_dirty_bitmap_next_zero, let's add corresponding
bdrv_dirty_bitmap_next_dirty, which is more comfortable to use than
bitmap iterators in some cases.
For test modify test_hbitmap_next_zero_check_range to check both
next_zero and next_dirty and add some new checks.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-7-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
We are going to introduce bdrv_dirty_bitmap_next_dirty so that same
variable may be used to store its return value and to be its parameter,
so it would int64_t.
Similarly, we are going to refactor hbitmap_next_dirty_area to use
hbitmap_next_dirty together with hbitmap_next_zero, therefore we want
hbitmap_next_zero parameter type to be int64_t too.
So, for convenience update all parameters of *_next_zero and
*_next_dirty_area to be int64_t.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-6-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Here's my final pull request for the qemu-5.0 soft freeze. Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.
Highlights are:
* Numerous fixes for the FWNMI feature
* A handful of cleanups to the device tree construction code
* Numerous fixes for the spapr-vscsi device
* A number of fixes and cleanups for real mode (MMU off) softmmu
handling
* Fixes for handling of the PAPR RMA
* Better handling of hotplug/unplug events during boot
* Assorted other fixes
-----BEGIN PGP SIGNATURE-----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=BPnR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200317' into staging
ppc patch queue 2020-03-17
Here's my final pull request for the qemu-5.0 soft freeze. Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.
Highlights are:
* Numerous fixes for the FWNMI feature
* A handful of cleanups to the device tree construction code
* Numerous fixes for the spapr-vscsi device
* A number of fixes and cleanups for real mode (MMU off) softmmu
handling
* Fixes for handling of the PAPR RMA
* Better handling of hotplug/unplug events during boot
* Assorted other fixes
# gpg: Signature made Tue 17 Mar 2020 09:55:07 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.0-20200317: (45 commits)
pseries: Update SLOF firmware image
ppc/spapr: Ignore common "ibm,nmi-interlock" Linux bug
ppc/spapr: Implement FWNMI System Reset delivery
target/ppc: allow ppc_cpu_do_system_reset to take an alternate vector
ppc/spapr: Allow FWNMI on TCG
ppc/spapr: Fix FWNMI machine check interrupt delivery
ppc/spapr: Add FWNMI System Reset state
ppc/spapr: Change FWNMI names
ppc/spapr: Fix FWNMI machine check failure handling
spapr: Rename DT functions to newer naming convention
spapr: Move creation of ibm,architecture-vec-5 property
spapr: Move creation of ibm,dynamic-reconfiguration-memory dt node
spapr/rtas: Reserve space for RTAS blob and log
pseries: Update SLOF firmware image
ppc/spapr: Move GPRs setup to one place
target/ppc: Fix rlwinm on ppc64
spapr/xive: use SPAPR_IRQ_IPI to define IPI ranges exposed to the guest
hw/scsi/spapr_vscsi: Convert debug fprintf() to trace event
hw/scsi/spapr_vscsi: Prevent buffer overflow
hw/scsi/spapr_vscsi: Do not mix SRP IU size with DMA buffer size
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update structures X86CPUTopoIDs and CPUX86State to hold the number of
nodes per package. This is required to build EPYC mode topology.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <158396720035.58170.1973738805301006456.stgit@naples-babu.amd.com>
Now that we have all the parameters in X86CPUTopoInfo, we can just
pass the structure to calculate the offsets and width.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <158396717953.58170.5628042059144117669.stgit@naples-babu.amd.com>
This is an effort to re-arrange few data structure for better readability.
1. Add X86CPUTopoInfo which will have all the topology informations
required to build the cpu topology. There is no functional changes.
2. Introduce init_topo_info to initialize X86CPUTopoInfo members from
X86MachineState.
3. Update x86 unit tests for new calling convention with parameter X86CPUTopoInfo
There is no functional changes.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <158396717251.58170.4499717831243474938.stgit@naples-babu.amd.com>
Podman users will most often be using buildah to build containers.
Among the differences between "buildah bud|build-using-dockerfile" and
a traditional "docker build" is that buildah does not run a container
during build.
To the best of my knowledge and experiments, this means that runtime
variables, such as ENV from one base image will not propagate into
another. The end result is that the location for the cross compiler
binaries, defined in the base "qemu/debian9-mxe" image, are not passed
through this image. Consequently, the cross compilers are not on PATH
and the build fails.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200312193616.438922-3-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Which is currenly missing, and will be referenced later in the
contributed CI playbooks.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200312193616.438922-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The newly introduced "boot linux" tests make use of Linux images that
are larger than usual, and fall into what Avocado calls "vmimages",
and can be referred to by name, version and architecture.
The images can be downloaded automatically during the test. But, to
make for more reliable test results, this introduces a target that
will download the vmimages for the architectures that have been
configured and are available for the currently used distro (Fedora
31).
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Cleber: implemented suggestions by Alex, download message, check-venv target]
Message-Id: <20200317141654.29355-4-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This acceptance test, validates that a full blown Linux guest can
successfully boot in QEMU. In this specific case, the guest chosen is
Fedora version 31.
* x86_64, pc-i440fx and pc-q35 machine types, with TCG and KVM as
accelerators
* aarch64 and virt machine type, with TCG and KVM as accelerators
* ppc64 and pseries machine type with TCG as accelerator
* s390x and s390-ccw-virtio machine type with TCG as accelerator
The Avocado vmimage utils library is used to download and cache the
Linux guest images, and from those images a snapshot image is created
and given to QEMU. If a qemu-img binary is available in the build
directory, it's used to create the snapshot image, so that matching
qemu-system-* and qemu-img are used in the same test run. If qemu-img
is not available in the build tree, one is attempted to be found
installed system-wide (in the $PATH). If qemu-img is not found in the
build dir or in the $PATH, the test is canceled.
The method for checking the successful boot is based on "cloudinit"
and its "phone home" feature. The guest is given an ISO image with
the location of the phone home server, and the information to post
(the instance ID). Upon receiving the correct information, from the
guest, the test is considered to have PASSed.
This test is currently limited to user mode networking only, and
instructs the guest to connect to the "router" address that is hard
coded in QEMU.
To create the cloudinit ISO image that will be used to configure the
guest, the pycdlib library is also required and has been added as
requirement to the virtual environment created by "check-venv".
The console output is read by a separate thread, by means of the
Avocado datadrainer utility module.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20200317141654.29355-3-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Some tests may benefit from using resources from a build directory.
This introduces three variables that can help tests find resources in
those directories.
First, a BUILD_DIR is assumed to exist, given that the primary form of
running the acceptance tests is from a build directory (which may or
may not be the same as the source tree, that is, the SOURCE_DIR).
If the directory containing the acceptance tests happens to be a link
to a directory, it's assumed to it points to the source tree
(SOURCE_DIR), which is the behavior defined on the QEMU Makefiles. If
the directory containing the acceptance tests is not a link, then a
in-tree build is assumed, and the BUILD_DIR and SOURCE_DIR have the
same value.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20200317141654.29355-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Unlike regular feature flags, the new special feature flag
"deprecated" is recognized by the QAPI generator. For now, it's only
permitted with commands, events, and struct members. It will be put
to use shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200317115459.31821-26-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Doc typo fixed]
In v4.1.0, we added feature flags just to struct types (commit
6a8c0b5102^..f3ed93d545), to satisfy an immediate need (commit
c9d4070991 "file-posix: Add dynamic-auto-read-only QAPI feature"). In
v4.2.0, we added them to commands (commit 23394b4c39 "qapi: Add
feature flags to commands") to satisfy another immediate need (commit
d76744e65e "qapi: Allow introspecting fix for savevm's cooperation
with blockdev").
Add them to the remaining definitions: enumeration types, union types,
alternate types, and events.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-13-armbru@redhat.com>
Locally defined helper qdict_cmp_simple() implements just enough of a
comparison to serve here. Replace it by qobject_is_equal(), which
implements all of it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-10-armbru@redhat.com>
Building expected data with qdict_put() & friends is tedious to write
and hard to read. Parse them from string literals with
qdict_from_jsonf_nofail() instead.
While there, use initializers instead of assignments for initializing
aggregate event arguments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-9-armbru@redhat.com>
Building requests with qdict_put() & friends is tedious to write and
hard to read. Parse them from string literals with
qdict_from_vjsonf_nofail() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-8-armbru@redhat.com>
Checking the value of qmp_dispatch() is repetitive. Factor out
helpers do_qmp_dispatch() and do_qmp_dispatch_error(). Without this,
the next commit would make things even more repetitive.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-6-armbru@redhat.com>
This test exercises the gdbstub while runing the sve-iotcl test. I
haven't plubmed it into make system as we need a way of verifying if
gdb has the right support for SVE.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200316172155.971-26-alex.bennee@linaro.org>
This is a fairly bare-bones test of setting the various vector sizes
for SVE which will only fail if the PR_SVE_SET_VL can't reduce the
user-space vector length by powers of 2.
However we will also be able to use it in a future test which
exercises the GDB stub.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-25-alex.bennee@linaro.org>
A very simple test case which sets and reads SVE registers while
running a test case. We don't really need to compile a SVE binary for
this case but we will later so keep it simple for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-24-alex.bennee@linaro.org>
The test runners job is to start QEMU with guest debug enabled and
then spawn a gdb process running a test script that exercises the
functionality it wants to test.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-23-alex.bennee@linaro.org>
This tests a bunch of registers that the kernel allows userspace to
read including the CPUID registers. We need a SVE aware compiler as we
are testing the id_aa64zfr0_el1 register in the set.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-21-alex.bennee@linaro.org>
Building the qemu:debian-amd64 fails when building VirGL:
make[2]: Entering directory '/usr/src/virglrenderer/src/gallium/auxiliary'
CC cso_cache/cso_cache.lo
CC cso_cache/cso_hash.lo
CC os/os_misc.lo
CC util/u_debug.lo
CC util/u_debug_describe.lo
CC util/u_format.lo
GEN util/u_format_table.c
Traceback (most recent call last):
File "./util/u_format_table.py", line 168, in <module>
main()
File "./util/u_format_table.py", line 164, in main
write_format_table(formats)
File "./util/u_format_table.py", line 132, in write_format_table
print(" %s,\t/* is_array */" % (bool_map(format.is_array()),))
File "/usr/src/virglrenderer/src/gallium/auxiliary/util/u_format_parse.py", line 164, in is_array
return self.array_element() != None
File "/usr/src/virglrenderer/src/gallium/auxiliary/util/u_format_parse.py", line 73, in __eq__
return self.type == other.type and self.norm == other.norm and self.pure == other.pure and self.size == other.size
AttributeError: 'NoneType' object has no attribute 'type'
make[2]: Leaving directory '/usr/src/virglrenderer/src/gallium/auxiliary'
make[2]: *** [Makefile:906: util/u_format_table.c] Error 1
make[1]: *** [Makefile:631: install-recursive] Error 1
VirGL commits a8962eda1..a613dcc82 fix this problem.
Update to VirGL 0.8.0 which contains them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200212202709.12665-4-philmd@redhat.com>
Message-Id: <20200316172155.971-5-alex.bennee@linaro.org>
The GLX configure option has been removed in 71c75f201d [*].
We missed that when updating to v0.7.0 in commit fab3220f97.
This silents:
configure: creating ./config.status
config.status: creating virglrenderer.pc
...
configure: WARNING: unrecognized options: --with-glx
[*] https://gitlab.freedesktop.org/virgl/virglrenderer/commit/71c75f201d
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200212202709.12665-3-philmd@redhat.com>
Message-Id: <20200316172155.971-4-alex.bennee@linaro.org>
We often run Linux kernels to test QEMU. We sometimes need
to build them manually to use non-default features. We only
miss the tiny 'bc' tool.
The ncurses library is helpful to run 'make menuconfig'.
Finally, gdb-multiarch allow us to debug a TCG guest when its
architecture is different than the host.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200212202738.12986-1-philmd@redhat.com>
Message-Id: <20200316172155.971-2-alex.bennee@linaro.org>
valgrind reports write unitialized bytes from buf[]. Clear them.
ASan reports we store to misaligned address in buf[]. Use stl_le_p()
for that.
Cc: Sam Eiderman <shmuel.eiderman@oracle.com>
Cc: John Snow <jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200317092354.31831-1-armbru@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
There should no longer be a reason to prevent TCG providing FWNMI.
System Reset interrupts are generated to the guest with nmi monitor
command and H_SIGNAL_SYS_RESET. Machine Checks can not be injected
currently, but this could be implemented with the mce monitor cmd
similarly to i386.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200316142613.121089-6-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
[dwg: Re-enable FWNMI in qtests, since that now works]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The option is called "FWNMI", and it involves more than just machine
checks, also machine checks can be delivered without the FWNMI option,
so re-name various things to reflect that.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200316142613.121089-3-npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Install the SASL library to build the VNC SASL auth protocol code.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200309122454.22551-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):
--v-- description start --v--
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to
declare variable-length types such as these ones is a flexible
array member [1], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler
warning in case the flexible array does not occur last in the
structure, which will help us prevent some kind of undefined
behavior bugs from being unadvertenly introduced [2] to the
Linux codebase from now on.
--^-- description end --^--
Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).
All these instances of code were found with the help of the
following Coccinelle script:
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
};
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
} QEMU_PACKED;
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1
Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix various bugs that might result in an assert() due to
incorrect hflags for M-profile CPUs
* Fix Aspeed SMC Controller user-mode select handling
* Report correct (with-tag) address in fault address register
when TBI is enabled
* cubieboard: make sure SOC object isn't leaked
* fsl-imx25: Wire up eSDHC controllers
* fsl-imx25: Wire up USB controllers
* New board model: orangepi-pc (OrangePi PC)
* ARM/KVM: if user doesn't select GIC version and the
host kernel can only provide GICv3, use that, rather
than defaulting to "fail because GICv2 isn't possible"
* kvm: Only do KVM_SET_VCPU_EVENTS at the last stage of sync
-----BEGIN PGP SIGNATURE-----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=LLqm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200312' into staging
target-arm queue:
* Fix various bugs that might result in an assert() due to
incorrect hflags for M-profile CPUs
* Fix Aspeed SMC Controller user-mode select handling
* Report correct (with-tag) address in fault address register
when TBI is enabled
* cubieboard: make sure SOC object isn't leaked
* fsl-imx25: Wire up eSDHC controllers
* fsl-imx25: Wire up USB controllers
* New board model: orangepi-pc (OrangePi PC)
* ARM/KVM: if user doesn't select GIC version and the
host kernel can only provide GICv3, use that, rather
than defaulting to "fail because GICv2 isn't possible"
* kvm: Only do KVM_SET_VCPU_EVENTS at the last stage of sync
# gpg: Signature made Thu 12 Mar 2020 16:43:46 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200312: (36 commits)
target/arm: kvm: Inject events at the last stage of sync
hw/arm/virt: kvm: allow gicv3 by default if v2 cannot work
hw/arm/virt: kvm: Restructure finalize_gic_version()
target/arm/kvm: Let kvm_arm_vgic_probe() return a bitmap
hw/arm/virt: Introduce finalize_gic_version()
hw/arm/virt: Introduce VirtGICType enum type
hw/arm/virt: Document 'max' value in gic-version property description
docs: add Orange Pi PC document
tests/boot_linux_console: Test booting NetBSD via U-Boot on OrangePi PC
tests/boot_linux_console: Add a SLOW test booting Ubuntu on OrangePi PC
tests/boot_linux_console: Add a SD card test for the OrangePi PC board
tests/boot_linux_console: Add initrd test for the Orange Pi PC board
tests/boot_linux_console: Add a quick test for the OrangePi PC board
hw/arm/allwinner: add RTC device support
hw/arm/allwinner-h3: add SDRAM controller device
hw/arm/allwinner-h3: add Boot ROM support
hw/arm/allwinner-h3: add EMAC ethernet device
hw/arm/allwinner: add SD/MMC host controller
hw/arm/allwinner: add Security Identifier device
hw/arm/allwinner: add CPU Configuration module
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test boots Ubuntu Bionic on a OrangePi PC board.
As it requires 1GB of storage, and is slow, this test is disabled
on automatic CI testing.
It is useful for workstation testing. Currently Avocado timeouts too
quickly, so we can't run userland commands.
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/
The Ubuntu image is downloaded from:
https://dl.armbian.com/orangepipc/Bionic_current
This test can be run using:
$ AVOCADO_ALLOW_LARGE_STORAGE=yes \
avocado --show=app,console run -t machine:orangepi-pc \
tests/acceptance/boot_linux_console.py
console: U-Boot SPL 2019.04-armbian (Nov 18 2019 - 23:08:35 +0100)
console: DRAM: 1024 MiB
console: Failed to set core voltage! Can't set CPU frequency
console: Trying to boot from MMC1
console: U-Boot 2019.04-armbian (Nov 18 2019 - 23:08:35 +0100) Allwinner Technology
console: CPU: Allwinner H3 (SUN8I 0000)
console: Model: Xunlong Orange Pi PC
console: DRAM: 1 GiB
console: MMC: mmc@1c0f000: 0
[...]
console: Uncompressing Linux... done, booting the kernel.
console: Booting Linux on physical CPU 0x0
console: Linux version 5.3.9-sunxi (root@builder) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #19.11.3 SMP Mon Nov 18 18:49:43 CET 2019
console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
console: CPU: div instructions available: patching division code
console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
console: OF: fdt: Machine model: Xunlong Orange Pi PC
[...]
console: EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
console: done.
console: Begin: Running /scripts/local-bottom ... done.
console: Begin: Running /scripts/init-bottom ... done.
console: systemd[1]: systemd 237 running in system mode. (...)
console: systemd[1]: Detected architecture arm.
console: Welcome to Ubuntu 18.04.3 LTS!
console: systemd[1]: Set hostname to <orangepipc>.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-17-nieklinnenbank@gmail.com
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
[NL: changed test to boot from SD card via BootROM, added check for 7z]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/
The SD image is from the kernelci.org project:
https://kernelci.org/faq/#the-code
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado --show=console run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
console: Uncompressing Linux... done, booting the kernel.
console: Booting Linux on physical CPU 0x0
console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
[...]
console: sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
console: sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.2
console: sunxi-mmc 1c0f000.mmc: Got CD GPIO
console: ledtrig-cpu: registered to indicate activity on CPUs
console: hidraw: raw HID events driver (C) Jiri Kosina
console: usbcore: registered new interface driver usbhid
console: usbhid: USB HID core driver
console: Initializing XFRM netlink socket
console: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
console: NET: Registered protocol family 10
console: mmc0: host does not support reading read-only switch, assuming write-enable
console: mmc0: Problem switching card into high-speed mode!
console: mmc0: new SD card at address 4567
console: mmcblk0: mmc0:4567 QEMU! 60.0 MiB
[...]
console: EXT4-fs (mmcblk0): mounting ext2 file system using the ext4 subsystem
console: EXT4-fs (mmcblk0): mounted filesystem without journal. Opts: (null)
console: VFS: Mounted root (ext2 filesystem) on device 179:0.
console: Run /sbin/init as init process
console: EXT4-fs (mmcblk0): re-mounted. Opts: block_validity,barrier,user_xattr,acl
console: Starting syslogd: OK
console: Starting klogd: OK
console: Populating /dev using udev: udevd[203]: starting version 3.2.7
console: /bin/sh: can't access tty; job control turned off
console: cat /proc/partitions
console: / # cat /proc/partitions
console: major minor #blocks name
console: 1 0 4096 ram0
console: 1 1 4096 ram1
console: 1 2 4096 ram2
console: 1 3 4096 ram3
console: 179 0 61440 mmcblk0
console: reboot
console: / # reboot
console: umount: devtmpfs busy - remounted read-only
console: EXT4-fs (mmcblk0): re-mounted. Opts: (null)
console: The system is going down NOW!
console: Sent SIGTERM to all processes
console: Sent SIGKILL to all processes
console: Requesting system reboot
console: reboot: Restarting system
JOB TIME : 68.64 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-16-nieklinnenbank@gmail.com
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
[NL: extend test with ethernet device checks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test boots a Linux kernel on a OrangePi PC board and verify
the serial output is working.
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/
The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado --show=console run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
console: Uncompressing Linux... done, booting the kernel.
console: Booting Linux on physical CPU 0x0
console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
console: CPU: div instructions available: patching division code
console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
console: OF: fdt: Machine model: Xunlong Orange Pi PC
[...]
console: Trying to unpack rootfs image as initramfs...
console: Freeing initrd memory: 3256K
console: Freeing unused kernel memory: 1024K
console: Run /init as init process
console: mount: mounting devtmpfs on /dev failed: Device or resource busy
console: Starting logging: OK
console: Initializing random number generator... random: dd: uninitialized urandom read (512 bytes read)
console: done.
console: Starting network: OK
console: Found console ttyS0
console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
console: Boot successful.
console: cat /proc/cpuinfo
console: / # cat /proc/cpuinfo
console: processor : 0
console: model name : ARMv7 Processor rev 5 (v7l)
console: BogoMIPS : 125.00
console: Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
console: CPU implementer : 0x41
console: CPU architecture: 7
console: CPU variant : 0x0
console: CPU part : 0xc07
console: CPU revision : 5
[...]
console: processor : 3
console: model name : ARMv7 Processor rev 5 (v7l)
console: BogoMIPS : 125.00
console: Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
console: CPU implementer : 0x41
console: CPU architecture: 7
console: CPU variant : 0x0
console: CPU part : 0xc07
console: CPU revision : 5
console: Hardware : Allwinner sun8i Family
console: Revision : 0000
console: Serial : 0000000000000000
console: cat /proc/iomem
console: / # cat /proc/iomem
console: 01000000-010fffff : clock@1000000
console: 01c00000-01c00fff : system-control@1c00000
console: 01c02000-01c02fff : dma-controller@1c02000
[...]
console: reboot
console: / # reboot
console: / # Found console ttyS0
console: Stopping network: OK
console: hrtimer: interrupt took 21852064 ns
console: Saving random seed... random: dd: uninitialized urandom read (512 bytes read)
console: done.
console: Stopping logging: OK
console: umount: devtmpfs busy - remounted read-only
console: umount: can't unmount /: Invalid argument
console: The system is going down NOW!
console: Sent SIGTERM to all processes
console: Sent SIGKILL to all processes
console: Requesting system reboot
console: reboot: Restarting system
PASS (48.32 s)
JOB TIME : 49.16 s
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-15-nieklinnenbank@gmail.com
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test boots a Linux kernel on a OrangePi PC board and verify
the serial output is working.
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ make check-venv
$ ./tests/venv/bin/avocado --show=console,app run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
JOB ID : 2e4d15eceb13c33672af406f08171e6e9de1414a
JOB LOG : ~/job-results/job-2019-12-17T05.46-2e4d15e/job.log
(1/1) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi:
console: Uncompressing Linux... done, booting the kernel.
console: Booting Linux on physical CPU 0x0
console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
console: CPU: div instructions available: patching division code
console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
console: OF: fdt: Machine model: Xunlong Orange Pi PC
console: Memory policy: Data cache writealloc
console: OF: reserved mem: failed to allocate memory for node 'cma@4a000000'
console: cma: Failed to reserve 128 MiB
console: psci: probing for conduit method from DT.
console: psci: PSCIv0.2 detected in firmware.
console: psci: Using standard PSCI v0.2 function IDs
console: psci: Trusted OS migration not required
console: random: get_random_bytes called from start_kernel+0x8d/0x3c2 with crng_init=0
console: percpu: Embedded 18 pages/cpu @(ptrval) s41228 r8192 d24308 u73728
console: Built 1 zonelists, mobility grouping on. Total pages: 32480
console: Kernel command line: printk.time=0 console=ttyS0,115200
PASS (8.59 s)
JOB TIME : 8.81 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-14-nieklinnenbank@gmail.com
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The dbus-vmstate-test has been failing in some Patchew configs
since about the 6th March:
dbus-daemon[9321]: Could not get password database information for UID of current process: User "???" unknown or no memory to allocate password entry
**
ERROR:/tmp/qemu-test/src/tests/qtest/dbus-vmstate-test.c:114:get_connection: assertion failed (err == NULL): The connection is closed (g-io-error-quark, 18)
cleaning up pid 9321
ERROR - Bail out! ERROR:/tmp/qemu-test/src/tests/qtest/dbus-vmstate-test.c:114:get_connection: assertion failed (err == NULL): The connection is closed (g-io-error-quark, 18)
make: *** [/tmp/qemu-test/src/tests/Makefile.include:632: check-qtest-x86_64] Error 1
make: *** Waiting for unfinished jobs....
It's not clear why this is happening (perhaps a recently revealed
race condition or a change in the patchew build environment?).
For the moment, disable this test so that patchew test runs are
useful and don't email the list with spurious failure mails.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200310152141.13959-1-peter.maydell@linaro.org
This patch adds a new test file to exercise the case where
qemu-img fails to complete for the LUKS format when a non-UTF8
secret is used.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200130213907.2830642-5-danielhb413@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The socket_scm_helper path got corrupted during the mechanical
refactor moving the qtests files into their own sub-directory.
Fixes: 1e8a1fae7 ("test: Move qtests to a separate directory")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200306165751.18986-1-philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds test cases for attaching the backing chain to a mirror
job target right before finalising the job, where the image is in a
non-mainloop AioContext (i.e. the backing chain needs to be moved to the
AioContext of the mirror target).
This requires switching the test case from virtio-blk to virtio-scsi
because virtio-blk only actually starts using the iothreads when the
guest driver initialises the device (which never happens in a test case
without a guest OS). virtio-scsi always keeps its block nodes in the
AioContext of the the requested iothread without guest interaction.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-7-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The newly tested scenario is a common live storage migration scenario:
The target node is opened without a backing file so that the active
layer is mirrored while its backing chain can be copied in the
background.
The backing chain should be attached to the mirror target node when
finalising the job, just before switching the users of the source node
to the new copy (at which point the mirror job still has a reference to
the node). drive-mirror did this automatically, but with blockdev-mirror
this is the job of the QMP client.
This patch adds test cases for two ways to achieve the desired result,
using either x-blockdev-reopen or blockdev-snapshot.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-5-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'job-complete' QMP command should be run with qmp() rather than
qmp_log() if use_log=False is passed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-4-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev-snapshot returned an error if the overlay was already in use,
which it defined as having any BlockBackend parent. This is in fact both
too strict (some parents can tolerate the change of visible data caused
by attaching a backing file) and too loose (some non-BlockBackend
parents may not be happy with it).
One important use case that is prevented by the too strict check is live
storage migration with blockdev-mirror. Here, the target node is
usually opened without a backing file so that the active layer is
mirrored while its backing chain can be copied in the background.
The backing chain should be attached to the mirror target node when
finalising the job, just before switching the users of the source node
to the new copy (at which point the mirror job still has a reference to
the node). drive-mirror did this automatically, but with blockdev-mirror
this is the job of the QMP client, so it needs a way to do this.
blockdev-snapshot is the obvious way, so this patch makes it work in
this scenario. The new condition is that no parent uses CONSISTENT_READ
permissions. This will ensure that the operation will still be blocked
when the node is attached to the guest device, so blockdev-snapshot
remains safe.
(For the sake of completeness, x-blockdev-reopen can be used to achieve
the same, however it is a big hammer, performs the graph change
completely unchecked and is still experimental. So even with the option
of using x-blockdev-reopen, there are reasons why blockdev-snapshot
should be able to perform this operation.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-3-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests 261 and 272 fail on RHEL 7 with coreutils 8.22, since od
--endian was not added until coreutils 8.23. Fix this by manually
constructing the final value one byte at a time.
Fixes: fc8ba423
Reported-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200226125424.481840-1-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test exercises the block/crypto.c "luks" block driver
.bdrv_measure() code.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200221112522.1497712-5-stefanha@redhat.com>
[mreitz: Renamed test from 282 to 288]
Signed-off-by: Max Reitz <mreitz@redhat.com>
In most qemu-img sub-commands the --object option only makes sense when
there is a filename. qemu-img measure is an exception because objects
may be referenced from the image creation options instead of an existing
image file. Allow --object without a filename.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200221112522.1497712-4-stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch allows bdrv_reopen() (and therefore the x-blockdev-reopen QMP
command) to attach a node as the new backing file even if the node is in
a different AioContext than the parent if one of both nodes can be moved
to the AioContext of the other node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20200306141413.30705-3-kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We'll want to test more than one successful case in the future, so
prepare the test for that by a refactoring that runs each scenario in a
separate VM.
test_iothreads_switch_{backing,overlay} currently produce errors, but
these are cases that should actually work, by switching either the
backing file node or the overlay node to the AioContext of the other
node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20200306141413.30705-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Trying to attach a HMP monitor to a chardev that is already in use
results in a crash because monitor_init_hmp() passes &error_abort to
qemu_chr_fe_init():
$ ./x86_64-softmmu/qemu-system-x86_64 --chardev stdio,id=foo --mon foo --mon foo
QEMU 4.2.50 monitor - type 'help' for more information
(qemu) Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:220:
qemu-system-x86_64: --mon foo: Device 'foo' is in use
Abgebrochen (Speicherabzug geschrieben)
Fix this by allowing monitor_init_hmp() to return an error and passing
any error in qemu_chr_fe_init() to its caller instead of aborting.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-19-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Trying to attach a QMP monitor to a chardev that is already in use
results in a crash because monitor_init_qmp() passes &error_abort to
qemu_chr_fe_init():
$ ./x86_64-softmmu/qemu-system-x86_64 --chardev stdio,id=foo --mon foo,mode=control --mon foo,mode=control
Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:220:
qemu-system-x86_64: --mon foo,mode=control: Device 'foo' is in use
Abgebrochen (Speicherabzug geschrieben)
Fix this by allowing monitor_init_qmp() to return an error and passing
any error in qemu_chr_fe_init() to its caller instead of aborting.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-18-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test what happens when writing data to an external data file, where the
write requires an L2 entry to be allocated, but the data write fails.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200225143130.111267-4-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test what happens when writing data to a preallocated zero cluster, but
the data write fails.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200225143130.111267-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The counting code here should use the local variable n_nodes_local.
Otherwise, the variable n_nodes is counting incorrectly, causing the
counting logic of the code to be wrong.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200207115433.118254-1-tianjia.zhang@linux.alibaba.com
Message-Id: <20200207115433.118254-1-tianjia.zhang@linux.alibaba.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200227031439.31386-3-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200227031439.31386-2-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAl5hNQEACgkQda1lgCoL
QhH7Egf/esr+B1d6kfD8bfy3byplFu3fnNTJRino2c6ElaRLXKG6kl1ODb7oQZ0g
37aVL+UVtVyTIkuTKT6Xx4xNq4TbrXB6hcNqoB/J9DaTVVYCLLQWrHRRmA8VrtLM
6H7hdmi7zPEOm6BDtDJzUyDmWsuZEwGcsToUixfMlG+rCbc3bC4rGQwVg2/t5Y55
LvP8SF6NngmL099ZtZbHsvaVxprZZ5fxx7NzjX6tW19TBg0PqtIV2Ro0VnCliaIN
L5xv5amlghIdBbkZKmc6hNERJ/U37lF3AxyY4dxCLn0waMN+DgYvfjr2ZSrB9PQ/
8yts/x5pIThCffvE0DSir2kQz8yUNg==
=MeFg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-03-04-2' into staging
Merge tpm 2020/03/04 v2
# gpg: Signature made Thu 05 Mar 2020 17:21:05 GMT
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2020-03-04-2:
test: tpm-tis: Add Sysbus TPM-TIS device test
test: tpm-tis: Get prepared to share tests between ISA and sysbus devices
test: tpm: pass optional machine options to swtpm test functions
docs/specs/tpm: Document TPM_TIS sysbus device for ARM
hw/arm/virt: vTPM support
tpm: Add the SysBus TPM TIS device
tpm: Separate TPM_TIS and TPM_TIS_ISA configs
tpm: Separate tpm_tis common functions from isa code
tpm: Use TPMState as a common struct
tpm: rename TPM_TIS into TPM_TIS_ISA
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The tests themselves are the same as the ISA device ones.
Only the main() changes as the "tpm-tis-device" device gets
instantiated. Also the base address of the device is not
0xFED40000 anymore but matches the base address of the
ARM virt platform bus.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200305165149.618-11-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
ISA and sysbus TPM-TIS devices will share their tests. Only
the main() will change (instantiation option is different).
Also the base address of the TPM-TIS device is going to be
different. on x86 it is located at 0xFED40000 while on ARM
it can be located at any location, discovered through the
device tree description.
So we put shared test functions in a new object module.
Each test needs to set tpm_tis_base_addr global variable.
Also take benefit of this move to fix "block comments using
a leading */ on a separate line" checkpatch warnings.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200305165149.618-10-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
We plan to use swtpm test functions on ARM for testing the
sysbus TPM-TIS device. However on ARM there is no default machine
type. So we need to explictly pass some machine options on startup.
Let's allow this by adding a new parameter to both swtpm test
functions and update all call sites.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200305165149.618-9-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Let's separate the compilation of tpm_tis_common.c from
the compilation of tpm_tis_isa.c
The common part will be also compiled along with the
tpm_tis_sysbus device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20200305165149.618-5-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
* Implement (trivially) ARMv8.2-TTCNP
* hw/arm/smmu-common: a fix to smmu_find_smmu_pcibus
* Remove unnecessary endianness-handling on some boards
* Avoid minor memory leaks from timer_new in some devices
* Honour more of the HCR_EL2 trap bits
* Complain rather than ignoring bad command line options for cubieboard
* Honour TBI for DC ZVA and exception return
-----BEGIN PGP SIGNATURE-----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=hT5f
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200305' into staging
* versal: Implement ADMA
* Implement (trivially) ARMv8.2-TTCNP
* hw/arm/smmu-common: a fix to smmu_find_smmu_pcibus
* Remove unnecessary endianness-handling on some boards
* Avoid minor memory leaks from timer_new in some devices
* Honour more of the HCR_EL2 trap bits
* Complain rather than ignoring bad command line options for cubieboard
* Honour TBI for DC ZVA and exception return
# gpg: Signature made Thu 05 Mar 2020 16:30:17 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200305: (37 commits)
target/arm: Clean address for DC ZVA
target/arm: Use DEF_HELPER_FLAGS for helper_dc_zva
target/arm: Move helper_dc_zva to helper-a64.c
target/arm: Apply TBI to ESR_ELx in helper_exception_return
target/arm: Introduce core_to_aa64_mmu_idx
target/arm: Optimize cpu_mmu_index
target/arm: Replicate TBI/TBID bits for single range regimes
hw/arm/cubieboard: report error when using unsupported -bios argument
hw/arm/cubieboard: restrict allowed RAM size to 512MiB and 1GiB
hw/arm/cubieboard: restrict allowed CPU type to ARM Cortex-A8
hw/arm/cubieboard: use ARM Cortex-A8 as the default CPU in machine definition
tests/tcg/aarch64: Add newline in pauth-1 printf
target/arm: Honor the HCR_EL2.TTLB bit
target/arm: Honor the HCR_EL2.TPU bit
target/arm: Honor the HCR_EL2.TPCP bit
target/arm: Honor the HCR_EL2.TACR bit
target/arm: Honor the HCR_EL2.TSW bit
target/arm: Honor the HCR_EL2.{TVM,TRVM} bits
target/arm: Improve masking in arm_hcr_el2_eff
target/arm: Remove EL2 and EL3 setup from user-only
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the output just a bit prettier when running by hand.
Cc: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200304155932.20452-3-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
If we want to use @skipUnless decorations on the class we need a
newer version of avocado.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200303150622.20133-9-alex.bennee@linaro.org>
This is used for some of the vm-build tests so lets detect it and
behave sanely when it is not installed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200303150622.20133-8-alex.bennee@linaro.org>
This method was located in both centos and ubuntu.i386.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219163537.22098-6-robert.foley@linaro.org>
Message-Id: <20200303150622.20133-6-alex.bennee@linaro.org>
Allow wait_ssh to wait for root user to be ready.
This solves the issue where we perform a wait_ssh()
successfully, but the root user is not yet ready
to be logged in.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200219163537.22098-5-robert.foley@linaro.org>
Message-Id: <20200303150622.20133-5-alex.bennee@linaro.org>
Add change to increase timeout waiting for VM to boot.
Needed for some emulation cases where it can take longer
than 5 minutes to boot.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200219163537.22098-4-robert.foley@linaro.org>
Message-Id: <20200303150622.20133-4-alex.bennee@linaro.org>
Add changes to tests/vm/basevm.py so that during debug mode we show ssh output.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219163537.22098-3-robert.foley@linaro.org>
Message-Id: <20200303150622.20133-3-alex.bennee@linaro.org>
Change Makefile.include to use $(PYTHON) so for vm-boot-ssh to be
consistent with other cases like vm-build.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219163537.22098-2-robert.foley@linaro.org>
Message-Id: <20200303150622.20133-2-alex.bennee@linaro.org>
This simulates the case that happens when we resume COLO after failover.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add a test that verifies the Tux logo is displayed on the framebuffer.
We simply follow the OpenCV "Template Matching with Multiple Objects"
tutorial, replacing Lionel Messi by Tux:
https://docs.opencv.org/4.2.0/d4/dc6/tutorial_py_template_matching.html
When OpenCV and NumPy are installed, this test can be run using:
$ AVOCADO_ALLOW_UNTRUSTED_CODE=hmmm \
avocado --show=app,framebuffer run -t device:framebuffer \
tests/acceptance/machine_arm_integratorcp.py
JOB ID : 8c46b0f8269242e87d738247883ea2a470df949e
JOB LOG : avocado/job-results/job-2020-01-31T21.38-8c46b0f/job.log
(1/1) tests/acceptance/machine_arm_integratorcp.py:IntegratorMachine.test_framebuffer_tux_logo:
framebuffer: found Tux at position [x, y] = (0, 0)
PASS (3.96 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 4.23 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20200225172501.29609-5-philmd@redhat.com
Message-Id: <20200131211102.29612-3-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As we want to re-use this code, extract it as a new function.
Since we are using the PL011 serial console, add a Avocado tag
to ease filtering of tests.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200225172501.29609-4-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a kernel and initrd available on github which we can use
for testing this machine.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200225172501.29609-3-philmd@redhat.com
Message-Id: <20200131170233.14584-1-thuth@redhat.com>
[PMD: Renamed test method, moved description from class to method]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Old kernels from the Meego project can be used to check that Linux
is at least starting on these machines.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200225172501.29609-2-philmd@redhat.com
Message-Id: <20200129131920.22302-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is memleak in test_load_qlist().It's not a big deal,
but test-vmstate will fail if sanitizers is enabled.
In addition, "ret" is written twice with the same value
in test_gtree_load_iommu().
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add it to several build systems to make testing good.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This will store the compression method to use. We start with none.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Rename multifd-method to multifd-compression
Add a test that verifies that each core properly displays the Tux
logo on the framebuffer device.
We simply follow the OpenCV "Template Matching with Multiple Objects"
tutorial, replacing Lionel Messi by Tux:
https://docs.opencv.org/4.2.0/d4/dc6/tutorial_py_template_matching.html
When OpenCV and NumPy are installed, this test can be run using:
$ avocado --show=app,framebuffer \
run -t cpu:i6400 \
tests/acceptance/machine_mips_malta.py
JOB ID : 54f3d8efd8674f289b8aa01a87f5d70c5814544c
JOB LOG : avocado/job-results/job-2020-02-01T20.52-54f3d8e/job.log
(1/3) tests/acceptance/machine_mips_malta.py:MaltaMachineFramebuffer.test_mips_malta_i6400_framebuffer_logo_1core:
framebuffer: found Tux at position (x, y) = (0, 0)
PASS (3.37 s)
(2/3) tests/acceptance/machine_mips_malta.py:MaltaMachineFramebuffer.test_mips_malta_i6400_framebuffer_logo_7cores:
framebuffer: found Tux at position (x, y) = (0, 0)
framebuffer: found Tux at position (x, y) = (88, 0)
framebuffer: found Tux at position (x, y) = (176, 0)
framebuffer: found Tux at position (x, y) = (264, 0)
framebuffer: found Tux at position (x, y) = (352, 0)
framebuffer: found Tux at position (x, y) = (440, 0)
framebuffer: found Tux at position (x, y) = (528, 0)
PASS (5.80 s)
(3/3) tests/acceptance/machine_mips_malta.py:MaltaMachineFramebuffer.test_mips_malta_i6400_framebuffer_logo_8cores:
framebuffer: found Tux at position (x, y) = (0, 0)
framebuffer: found Tux at position (x, y) = (88, 0)
framebuffer: found Tux at position (x, y) = (176, 0)
framebuffer: found Tux at position (x, y) = (264, 0)
framebuffer: found Tux at position (x, y) = (352, 0)
framebuffer: found Tux at position (x, y) = (440, 0)
framebuffer: found Tux at position (x, y) = (528, 0)
framebuffer: found Tux at position (x, y) = (616, 0)
PASS (6.67 s)
RESULTS : PASS 3 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 16.79 s
If the AVOCADO_CV2_SCREENDUMP_PNG_PATH environment variable is set, the
test will save the screenshot with matched squares to it.
Test inspired by the following post:
https://www.mips.com/blog/how-to-run-smp-linux-in-qemu-on-a-mips64-release-6-cpu/
Kernel built with the following Docker file:
https://github.com/philmd/qemu-testing-blob/blob/malta_i6400/mips/malta/mips64el/Dockerfile
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200201204751.17810-1-f4bug@amsat.org>
Pointer authentication isn't perfect so measure the percentage of
failed checks. As we want to vary the pointer we work through a bunch
of different addresses.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200225124710.14152-20-alex.bennee@linaro.org>
Although most people use the docker images this can trip up on
developer systems with actual valid cross-compilers!
Fixes: bb516dfc5b
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200225124710.14152-19-alex.bennee@linaro.org>
When combined with heavy plugins we occasionally hit the timeouts.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200225124710.14152-17-alex.bennee@linaro.org>
TCG plugins are responsible for their own memory usage and although
the plugin_exit is tied to the end of execution in this case it is
still poor practice. Ensure we delete the hash table and related data
when we are done to be a good plugin citizen.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200225124710.14152-16-alex.bennee@linaro.org>
According to the glibc function requirements, we need initialise
the variable. Otherwise there will be compilation warnings:
glib-autocleanups.h:28:3: warning: ‘out’ may be
used uninitialized in this function [-Wmaybe-uninitialized]
g_free (*pp);
^~~~~~~~~~~~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200206093238.203984-1-kuhn.chenqun@huawei.com>
[AJB: uses Thomas's single line allocation]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200225124710.14152-13-alex.bennee@linaro.org>
At least on ZFS this was failing as 512 was less than or equal to 512.
I suspect the reason is additional compression done by ZFS and however
qemu-img gets the actual size.
Loosen the criteria to make sure after is not bigger than before and
also dump the values in the report.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200225124710.14152-9-alex.bennee@linaro.org>
This is mainly to help with reasoning what the test is trying to do.
We can move rcu_stress_idx to a local variable as there is only ever
one updater thread. I've also added an assert to catch the case where
we end up updating the current structure to itself which is the only
way I can see the mberror cases we are seeing on Travis.
We shall see if the rcutorture test failures go away now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200225124710.14152-5-alex.bennee@linaro.org>
This is pure code motion with no functional effect.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200225124710.14152-4-alex.bennee@linaro.org>
Although documented in the comments we don't display all the various
invocations we can in the usage.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200225124710.14152-3-alex.bennee@linaro.org>
If we have plugins enabled we still need to have built the test to be
able to run it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200225124710.14152-2-alex.bennee@linaro.org>
Remind users of rebuild-expected-aml.sh about the process
to follow. Suppress the warning if allowed file list exists -
that's a big hint user is already aware of the process.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Turns out it goes to stdout which is suppressed even with V=1.
Force DIFF output to stderr to make it visible.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For now just a pointer to the source file.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This series removes ad hoc RAM allocation API (memory_region_allocate_system_memory)
and consolidates it around hostmem backend. It allows to
* resolve conflicts between global -mem-prealloc and hostmem's "policy" option,
fixing premature allocation before binding policy is applied
* simplify complicated memory allocation routines which had to deal with 2 ways
to allocate RAM.
* reuse hostmem backends of a choice for main RAM without adding extra CLI
options to duplicate hostmem features. A recent case was -mem-shared, to
enable vhost-user on targets that don't support hostmem backends [1] (ex: s390)
* move RAM allocation from individual boards into generic machine code and
provide them with prepared MemoryRegion.
* clean up deprecated NUMA features which were tied to the old API (see patches)
- "numa: remove deprecated -mem-path fallback to anonymous RAM"
- (POSTPONED, waiting on libvirt side) "forbid '-numa node,mem' for 5.0 and newer machine types"
- (POSTPONED) "numa: remove deprecated implicit RAM distribution between nodes"
Introduce a new machine.memory-backend property and wrapper code that aliases
global -mem-path and -mem-alloc into automatically created hostmem backend
properties (provided memory-backend was not set explicitly given by user).
A bulk of trivial patches then follow to incrementally convert individual
boards to using machine.memory-backend provided MemoryRegion.
Board conversion typically involves:
* providing MachineClass::default_ram_size and MachineClass::default_ram_id
so generic code could create default backend if user didn't explicitly provide
memory-backend or -m options
* dropping memory_region_allocate_system_memory() call
* using convenience MachineState::ram MemoryRegion, which points to MemoryRegion
allocated by ram-memdev
On top of that for some boards:
* missing ram_size checks are added (typically it were boards with fixed ram size)
* ram_size fixups are replaced by checks and hard errors, forcing user to
provide correct "-m" values instead of ignoring it and continuing running.
After all boards are converted, the old API is removed and memory allocation
routines are cleaned up.
The virtio-scsi fuzz target sets up and fuzzes the available virtio-scsi
queues. After an element is placed on a queue, the fuzzer can select
whether to perform a kick, or continue adding elements.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-22-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-net fuzz target feeds inputs to all three virtio-net
virtqueues, and uses forking to avoid leaking state between fuzz runs.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-21-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These three targets should simply fuzz reads/writes to a couple ioports,
but they mostly serve as examples of different ways to write targets.
They demonstrate using qtest and qos for fuzzing, as well as using
rebooting and forking to reset state, or not resetting it at all.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-20-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-17-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
fork() is a simple way to ensure that state does not leak in between
fuzzing runs. Unfortunately, the fuzzer mutation engine relies on
bitmaps which contain coverage information for each fuzzing run, and
these bitmaps should be copied from the child to the parent(where the
mutation occurs). These bitmaps are created through compile-time
instrumentation and they are not shared with fork()-ed processes, by
default. To address this, we create a shared memory region, adjust its
size and map it _over_ the counter region. Furthermore, libfuzzer
doesn't generally expose the globals that specify the location of the
counters/coverage bitmap. As a workaround, we rely on a custom linker
script which forces all of the bitmaps we care about to be placed in a
contiguous region, which is easy to locate and mmap over.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-16-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
tests/fuzz/fuzz.c serves as the entry point for the virtual-device
fuzzer. Namely, libfuzzer invokes the LLVMFuzzerInitialize and
LLVMFuzzerTestOneInput functions, both of which are defined in this
file. This change adds a "FuzzTarget" struct, along with the
fuzz_add_target function, which should be used to define new fuzz
targets.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-13-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The moved functions are not specific to qos-test and might be useful
elsewhere. For example the virtual-device fuzzer makes use of them for
qos-assisted fuzz-targets.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-12-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Most qos-related objects were specified in the qos-test-obj-y variable.
qos-test-obj-y also included qos-test.o which defines a main().
This made it difficult to repurpose qos-test-obj-y to link anything
beside tests/qos-test against libqos. This change separates objects that
are libqos-specific and ones that are qos-test specific into different
variables.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200220041118.23264-11-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The names i2c_send and i2c_recv collide with functions defined in
hw/i2c/core.c. This causes an error when linking against libqos and
softmmu simultaneously (for example when using qtest inproc). Rename the
libqos functions to avoid this.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200220041118.23264-10-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When using qtest "in-process" communication, qtest_sendf directly calls
a function in the server (qtest.c). Previously, bufwrite used
socket_send, which bypasses the TransportOps enabling the call into
qtest.c. This change replaces the socket_send calls with ops->send,
maintaining the benefits of the direct socket_send call, while adding
support for in-process qtest calls.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-8-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This makes it simple to swap the transport functions for qtest commands
to and from the qtest client. For example, now it is possible to
directly pass qtest commands to a server handler that exists within the
same process, without the standard way of writing to a file descriptor.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-7-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The ctx->first_bh list contains all created BHs, including those that
are not scheduled. The list is iterated by the event loop and therefore
has O(n) time complexity with respected to the number of created BHs.
Rewrite BHs so that only scheduled or deleted BHs are enqueued.
Only BHs that actually require action will be iterated.
One semantic change is required: qemu_bh_delete() enqueues the BH and
therefore invokes aio_notify(). The
tests/test-aio.c:test_source_bh_delete_from_cb() test case assumed that
g_main_context_iteration(NULL, false) returns false after
qemu_bh_delete() but it now returns true for one iteration. Fix up the
test case.
This patch makes aio_compute_timeout() and aio_bh_poll() drop from a CPU
profile reported by perf-top(1). Previously they combined to 9% CPU
utilization when AioContext polling is commented out and the guest has 2
virtio-blk,num-queues=1 and 99 virtio-blk,num-queues=32 devices.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200221093951.1414693-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QSLIST is the only family of lists for which we do not have RCU-friendly accessors,
add them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200220103828.24525-1-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- qemu-img convert: New --target-is-zero parameter
- qcow2: Specify non-default compression type flag
- optionally flat output for query-named-block-nodes
- some fixes
- pseudo-creation of images on block devices is now done by a generic
block layer function
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl5Ork4SHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9A7XYH/RFs+kxf+v9V1qE1rwdbJCXdA36/JIoF
AW6CtPk47vEodvssjgPBygs/GBqQDdkpZKyA42ZxrE3dPeyRCusncYKRRFPbP4Oq
pXj/ZYy9YBn0LIqK41kmXgMdm9HZ113WcG5/rNuh5DOtwX7e688tmHXOHbT8MKAR
q/nBK1AVNVxFyBRnRow/YK1jGXmA5rIoONVd6Spkj/5xmKZJ6RtpQb1+WnD7HI3j
TVvDcEnKGCT/qZ73rJ6UFRIUdllAQ7fJAOLnXYFwcwkErq3fMEwLpq3syuiuks+B
KoFlUzCsM3xiASGnz5MgZI7EVhjGzruneVoBrSyhjlRqNaOB2pYeBwQ=
=4/ZP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-02-20' into staging
Block patches:
- qemu-img convert: New --target-is-zero parameter
- qcow2: Specify non-default compression type flag
- optionally flat output for query-named-block-nodes
- some fixes
- pseudo-creation of images on block devices is now done by a generic
block layer function
# gpg: Signature made Thu 20 Feb 2020 16:05:34 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-02-20:
iotests: Test snapshot -l field separation
block: Fix VM size field width in snapshot dump
iotests: Test convert -n -B to backing-less target
qemu-img: Fix convert -n -B for backing-less targets
iotests: Add test for image creation fallback
iscsi: Drop iscsi_co_create_opts()
file-posix: Drop hdev_co_create_opts()
block: Generic file creation fallback
block/nbd: Fix hang in .bdrv_close()
iotests/279: Fix for non-qcow2 formats
block/backup-top: fix flags handling
block: always fill entire LUKS header space with zeros
qemu-img: Add --target-is-zero to convert
qapi: Allow getting flat output from 'query-named-block-nodes'
iotests/147: Fix drive parameters
iotests: Remove the superfluous 2nd check for the availability of quorum
docs: qcow2: introduce compression type feature
docs: improve qcow2 spec about extending image header
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a test that all fields in "qemu-img snapshot -l"s output are
separated by spaces.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200117105859.241818-3-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Renamed test from 284 to 286]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This must not crash.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200121155915.98232-3-mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-6-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
[mreitz: Added a note that NBD does not support resizing, which is why
the second case is expected to fail]
Signed-off-by: Max Reitz <mreitz@redhat.com>
First, driver=qcow2 will not work so well with non-qcow2 formats (and
this test claims to support qcow, qed, and vmdk).
Second, vmdk will always report the backing file format to be vmdk.
Filter that out so the output looks like for all other formats.
Third, the flat vmdk subformats do not support backing files, so they
will not work with this test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20191219144243.1763246-1-mreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When initializing the LUKS header the size with default encryption
parameters will currently be 2068480 bytes. This is rounded up to
a multiple of the cluster size, 2081792, with 64k sectors. If the
end of the header is not the same as the end of the cluster we fill
the extra space with zeros. This was forgetting that not even the
space allocated for the header will be fully initialized, as we
only write key material for the first key slot. The space left
for the other 7 slots is never written to.
An optimization to the ref count checking code:
commit a5fff8d4b4 (refs/bisect/bad)
Author: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Date: Wed Feb 27 16:14:30 2019 +0300
qcow2-refcount: avoid eating RAM
made the assumption that every cluster which was allocated would
have at least some data written to it. This was violated by way
the LUKS header is only partially written, with much space simply
reserved for future use.
Depending on the cluster size this problem was masked by the
logic which wrote zeros between the end of the LUKS header and
the end of the cluster.
$ qemu-img create --object secret,id=cluster_encrypt0,data=123456 \
-f qcow2 -o cluster_size=2k,encrypt.iter-time=1,\
encrypt.format=luks,encrypt.key-secret=cluster_encrypt0 \
cluster_size_check.qcow2 100M
Formatting 'cluster_size_check.qcow2', fmt=qcow2 size=104857600
encrypt.format=luks encrypt.key-secret=cluster_encrypt0
encrypt.iter-time=1 cluster_size=2048 lazy_refcounts=off refcount_bits=16
$ qemu-img check --object secret,id=cluster_encrypt0,data=redhat \
'json:{"driver": "qcow2", "encrypt.format": "luks", \
"encrypt.key-secret": "cluster_encrypt0", \
"file.driver": "file", "file.filename": "cluster_size_check.qcow2"}'
ERROR: counting reference for region exceeding the end of the file by one cluster or more: offset 0x2000 size 0x1f9000
Leaked cluster 4 refcount=1 reference=0
...snip...
Leaked cluster 130 refcount=1 reference=0
1 errors were found on the image.
Data may be corrupted, or further writes to the image may corrupt it.
127 leaked clusters were found on the image.
This means waste of disk space, but no harm to data.
Image end offset: 268288
The problem only exists when the disk image is entirely empty. Writing
data to the disk image payload will solve the problem by causing the
end of the file to be extended further.
The change fixes it by ensuring that the entire allocated LUKS header
region is fully initialized with zeros. The qemu-img check will still
fail for any pre-existing disk images created prior to this change,
unless at least 1 byte of the payload is written to.
Fully writing zeros to the entire LUKS header is a good idea regardless
as it ensures that space has been allocated on the host filesystem (or
whatever block storage backend is used).
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200207135520.2669430-1-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
8dff69b94 added an aio parameter to the drive parameter but forgot to
add a comma before, thus breaking the test. Fix it again.
Fixes: 8dff69b941
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200206130812.612960-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit d9df28e7b0 ("iotests: check whitelisted formats") added the
modern @iotests.skip_if_unsupported() to the functions in this test,
so we don't need the old explicit test here anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200129141751.32652-1-thuth@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Tested-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Considering that legacy "mem" option is deprecated, use memdev
in tests and add an additional test for legacy "mem" option
on old machine type, to make sure it won't regress in the future.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200219160953.13771-80-imammedo@redhat.com>
Use GString to pass argument to make_cli() so that it would be easy
to dynamically change test case arguments from main(). The follow up
patch will use it to change RAM size options depending on target.
While at it cleanup 'cli' freeing, using g_autofree annotation.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200219160953.13771-79-imammedo@redhat.com>
Fixes: fc281c8020
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-13-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-20-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add two tests to see that you cannot replace a Quorum child with the
mirror job while the child is in use by a different parent.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-19-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
041's TestRepairQuorum has its own image_len, no need to refer to
TestSingleDrive. (This patch allows commenting out TestSingleDrive to
speed up 041 during test testing.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-18-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-17-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All tearDowns in 041 shutdown the VM. Thus, test cases do not need to
do it themselves (unless they need the VM to be down for some
post-operation check).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-16-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This way, we get to see errors during the completion phase.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-14-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using -drive with default options means that a virtio-blk drive will be
created that has write access to the to-be quorum children. Quorum
should have exclusive write access to them, so we should use -blockdev
instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-5-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests both read failure (from the top node) and write failure (to
the base node) for on-error=report/stop/ignore.
As block-commit actually starts two different types of block jobs
(mirror.c for committing the active later, commit.c for intermediate
layers), all tests are run for both cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-8-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a test for 'qemu-img convert' with copy offloading where the
target image has an external data file. If the test hosts supports it,
it tests both the case where copy offloading is supported and the case
where it isn't (otherwise we just test unsupported twice).
More specifically, the case with unsupported copy offloading tests
qcow2_alloc_cluster_abort() with external data files.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200211094900.17315-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
misc.json contains definitions that are related to the system emulator,
so it can't be used for other tools like the storage daemon. This patch
moves basic functionality that is shared between all tools (and mostly
related to the monitor itself) into a new control.json, which could be
used in tools as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-3-kwolf@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* i.MX: Fix inverted sense of register bits in watchdog timer
* i.MX: Add support for WDT on i.MX6
* arm/virt: cleanups to ACPI tables
* Implement ARMv8.1-VMID16 extension
* Implement ARMv8.1-PAN
* Implement ARMv8.2-UAO
* Implement ARMv8.2-ATS1E1
* ast2400/2500/2600: Wire up EHCI controllers
* hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
* hw/arm/raspi: Clean up the board code
-----BEGIN PGP SIGNATURE-----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=Mspo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200213' into staging
target-arm queue:
* i.MX: Fix inverted sense of register bits in watchdog timer
* i.MX: Add support for WDT on i.MX6
* arm/virt: cleanups to ACPI tables
* Implement ARMv8.1-VMID16 extension
* Implement ARMv8.1-PAN
* Implement ARMv8.2-UAO
* Implement ARMv8.2-ATS1E1
* ast2400/2500/2600: Wire up EHCI controllers
* hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
* hw/arm/raspi: Clean up the board code
# gpg: Signature made Thu 13 Feb 2020 14:40:34 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200213: (46 commits)
target/arm: Implement ARMv8.1-VMID16 extension
hw/arm/raspi: Extract the cores count from the board revision
hw/arm/raspi: Use a unique raspi_machine_class_init() method
hw/arm/raspi: Extract the board model from the board revision
hw/arm/raspi: Set default RAM size to size encoded in board revision
hw/arm/raspi: Let class_init() directly call raspi_machine_init()
hw/arm/raspi: Make board_rev a field of RaspiMachineClass
hw/arm/raspi: Make machines children of abstract RaspiMachineClass
hw/arm/raspi: Trivial code movement
hw/arm/raspi: Extract the processor type from the board revision
hw/arm/raspi: Extract the RAM size from the board revision
hw/arm/raspi: Extract the version from the board revision
hw/arm/raspi: Correct the board descriptions
hw/arm/raspi: Use BCM2708 machine type with pre Device Tree kernels
hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
hw/arm: ast2600: Wire up EHCI controllers
hw/arm: ast2400/ast2500: Wire up EHCI controllers
target/arm: Enable ARMv8.2-UAO in -cpu max
target/arm: Implement UAO semantics
target/arm: Update MSR access to UAO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to change ARM virt ACPI DSDT table, which will cause make
check to fail, so temporarily add related golden masters to ignore
list.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200204014325.16279-2-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* fixes for the ucode revision patch from the previous pull request
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeRBoQAAoJEL/70l94x66DYOUIAJKM5PDAhOkJpSqoSz2mMVJN
IOq2YhmbQHSVojUDCUEFnKd2Zja858vsOoAslgce0nbgj+ZNn9WZEVIKeHqkW6cg
gWybMy1deT5o0U05e6/EIL0id8N5FVMLdUZRdGCFk4qtILFa1kRYJmlwNOMxSVkB
MSwOy60//+po6lW0WSKD2aTf9qVvZJOQjZozqFrGlIPG/SnqrPZCMRxR/XIrrJuF
GZZyiAsRXFU1mabr7HafdUj+MYf0DWSvATmihz4wsI/LlXx712uVm9eZ48Rc6PyF
wEKh17/2bVPoL1g9OeTKYnX9aKt/7C0D98n3W0foG3IpzZzPLX4NaNKPihb5n7I=
=VlyM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* various small fixes and cleanups
* fixes for the ucode revision patch from the previous pull request
# gpg: Signature made Wed 12 Feb 2020 15:30:24 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
target/i386: enable monitor and ucode revision with -cpu max
target/i386: check for availability of MSR_IA32_UCODE_REV as an emulated MSR
target/i386: fix TCG UCODE_REV access
build: move TARGET_GPROF to config-host.mak
exec: do not define use_icount for user-mode emulation
minikconf: accept alnum identifiers
Remove support for CLOCK_MONOTONIC not being defined
seqlock: fix seqlock_write_unlock_impl function
vl: Don't mismatch g_strsplit()/g_free()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
spotted by asan, 'check-qtest-aarch64' runs fail if sanitizers is enabled.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There's an assert in autoconverge that checks that we quit the
iteration when we go below the expected threshold. Philippe
saw a case where this assert fired with the measured value
slightly over the threshold. (about 3k out of a few million).
I can think of two reasons:
a) Rounding errors
b) That after we make the decision to quit iteration we do one
more sync and that sees a few more dirty pages.
So add 1% slack to the assertion, that should cover a and
most cases of b, probably all we'll see for the test.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
TARGET_GPROF is the same for all targets, write it to
config-host.mak instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: <20200204161104.21077-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- some more protocol sanity checks
- qtest for readdir
- Christian Schoenebeck now official reviewer
-----BEGIN PGP SIGNATURE-----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=oMrh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/9p-next-2020-02-08' into staging
9p patches:
- some more protocol sanity checks
- qtest for readdir
- Christian Schoenebeck now official reviewer
# gpg: Signature made Sat 08 Feb 2020 08:38:10 GMT
# gpg: using RSA key B4828BAF943140CEF2A3491071D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>" [full]
# gpg: aka "Gregory Kurz <gregory.kurz@free.fr>" [full]
# gpg: aka "[jpeg image of size 3330]" [full]
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3 4910 71D4 D5E5 822F 73D6
* remotes/gkurz/tags/9p-next-2020-02-08:
MAINTAINERS: 9pfs: Add myself as reviewer
tests/virtio-9p: added readdir test
hw/9pfs/9p-synth: added directory for readdir test
9pfs: validate count sent by client with T_readdir
9pfs: require msize >= 4096
tests/virtio-9p: add terminating null in v9fs_string_read()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The first readdir test simply checks the amount of directory
entries returned by 9pfs server, according to the created amount
of virtual files on 9pfs synth driver side. Then the subsequent
readdir test also checks whether all directory entries have the
expected file names (as created on 9pfs synth driver side),
ignoring their precise order in result list though.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <e0b4402722a877178f8fb6a8ad7b64bb20150613.1579567020.git.qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
The 9p protocol sends strings in general without null termination
over the wire. However for future use of this functions it is
beneficial for the delivered string to be null terminated though
for being able to use the string with standard C functions which
often rely on strings being null terminated.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <52c84e2ce3bcafc2a38eed13b8c8e23bc1a8ecb9.1579567019.git.qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
This is only needed for Python 2, which we do not support anymore.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200204160604.19883-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Scripts that have a Python shebang are meant to be executed directly from the
shell; give them 755 permissions.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200204160237.16889-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
All the iotests Python scripts have been converted to search for
the Python 3 interpreter. Update the ./check script accordingly.
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-13-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -lF '#!/usr/bin/env python' \
| xargs grep -L 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-11-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -l 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-5-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -l 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-4-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
As we want to enforce a unique and explicit Python 3 interpreter,
we need let this script handle 'python3' too.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-3-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We don't need the default options to run this test.
This fixes errors when running a binary built with
--without-default-devices such:
ERROR: qemu-system-arm: Unsupported NIC model: virtio-net-pci
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200129212345.20547-28-philmd@redhat.com>
[PMD: Rebased]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
By using an Avocado tag, we can run all tests described by that
tag as once:
$ avocado --show=app run -t migration tests/acceptance/
JOB ID : 165477737509503fcfa6d7108057a0a18f2a6559
JOB LOG : avocado/job-results/job-2020-02-04T17.29-1654777/job.log
(1/3) tests/acceptance/migration.py:Migration.test_migration_with_tcp_localhost: PASS (0.38 s)
(2/3) tests/acceptance/migration.py:Migration.test_migration_with_unix: PASS (0.33 s)
(3/3) tests/acceptance/migration.py:Migration.test_migration_with_exec: PASS (0.07 s)
RESULTS : PASS 3 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200204163304.14616-1-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Along with VM migration via TCP, we can use migration through
the EXEC transport protocol
Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203111631.18796-3-ovoshcha@redhat.com>
[PMD: Split patch in 2, reworded subject and description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Along with VM migration via TCP, we can use migration through
the UNIX transport protocol
Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203111631.18796-3-ovoshcha@redhat.com>
[PMD: Split patch in 2, reworded subject and description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We are going to reuse this code when testing different transport
methods, so factor it out first.
Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203111631.18796-2-ovoshcha@redhat.com>
[PMD: Split patch in 2, reworded subject and description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We are going to reuse this code when testing different transport
methods, so factor it out first
Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203111631.18796-2-ovoshcha@redhat.com>
[PMD: Split patch in 2, reworded subject and description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We don't need the default options to run this test.
This fixes errors when running a binary built with
--without-default-devices such:
ERROR: qemu-system-arm: Unsupported NIC model: virtio-net-pci
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200129212345.20547-29-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
As we only read the serial console, we don't need to force a
VGA display. This fixes when running a binary built with
--without-default-devices:
ERROR: qemu-system-alpha: standard VGA not available
We also need the '-nodefaults' argument to avoid:
ERROR: qemu-system-alpha: Unsupported NIC model: e1000
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200129212345.20547-27-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This test fails on various CI:
- Using QEMU 4.0:
tests/acceptance/x86_cpu_model_versions.py:X86CPUModelAliases.test_none_alias: ERROR: 'alias-of' (0.45 s)
- On OSX
Unexpected error in object_property_find() at qom/object.c:1201:
qemu-system-x86_64: -device virtio-blk-pci,id=scsi0,drive=drive0: can't apply global virtio-blk-device.scsi=true: Property '.scsi' not found
- When removing unavailable machine:
VirtioMaxSegSettingsCheck.test_machine_types: ERROR: list.remove(x): x not in list (0.12 s)
- Using Xen:
xencall: error: Could not obtain handle on privileged command interface: No such file or directory
xen be core: xen be core: can't open xen interface
- On PPC:
TestFail: machine type pseries-2.8: No Transactional Memory support in TCG, try appending -machine cap-htm=off
- On S390X configured with --without-default-devices:
ERROR: qemu-system-s390x: -device virtio-scsi-pci,id=scsi0: 'virtio-scsi-pci' is not a valid device model name
Disable it for now.
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200206171715.25041-1-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We don't need the default options to run this test.
This fixes errors when running a binary built with
--without-default-devices such:
ERROR: qemu-system-s390x: Unknown device 'virtio-net-ccw' for bus 'virtual-css-bus'
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200129212345.20547-25-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Since, virtio_seg_max_adjust checks not only seg_max, but also
virtqueue_size parameter, let's make the test more general and
add new parameters to be checked there in the future.
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <20200129140702.5411-5-dplotnikov@virtuozzo.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The 2018 edition of the QEMU advent calendar 2018 featured Linux images
for various non-x86 machines. We can use them for a boot tests in our
acceptance test suite.
Let's also make sure that we build the corresponding machines in Travis.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200124170325.30072-1-thuth@redhat.com>
[PMD: Rebased, --python=python3 parameter dropped in commit 5311cb12e]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Avocado tags are handy to automatically select tests matching
the tags. Since this test also runs U-Boot, tag it.
We can run all the tests using U-Boot as once with:
$ avocado --show=app run -t u-boot tests/acceptance/
JOB LOG : avocado/job-results/job-2020-01-21T00.16-ee9344e/job.log
(1/3) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_emcraft_sf2: PASS (16.59 s)
(2/3) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_uboot: PASS (0.47 s)
(3/3) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_aarch64_raspi3_uboot: PASS (2.43 s)
RESULTS : PASS 3 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 19.78 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200120235159.18510-8-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The second param in extract_from_deb() is 'path' not 'file'
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1580142994-1836-4-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Change extract_from_deb() to use os.path routines to manipulate the
filesystem path returned when extracting a file.
Suggested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1580914565-19675-7-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add a method to extract a specified file from an RPM to the test's
working directory and return the path to the extracted file.
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1580914565-19675-5-git-send-email-liam.merwick@oracle.com>
[PMD: Rebased]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We need a function to interrupt interactive consoles.
Example: Interrupt U-Boot to set different environment values.
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200120235159.18510-4-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Since we are going to re-use the code shared between
wait_for_console_pattern() and exec_command_and_wait_for_pattern(),
extract the common part into a local function.
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200120235159.18510-3-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
According to Kevin, tests 030, 040 and 041 are among the most valuable
tests that we have, so we should always run them if possible, even if
they take a little bit longer.
According to Max, it would be good to have a test for iothreads and
migration. 127 and 256 seem to be good candidates for iothreads. For
migration, let's enable 181 and 203 (which also tests iothreads).
(091 would be a good candidate for migration, too, but Alex Bennée
reported that this test fails on ZFS file systems, so it can't be
included yet)
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-7-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to enable some of the python-based tests in the "auto" group,
and these tests require virtio-blk to work properly. Running iotests
without virtio-blk likely does not make too much sense anyway, so instead
of adding a check for the availability of virtio-blk to each and every
test (which does not sound very appealing), let's rather add a check for
this a central spot in the "check" script instead (so that it is still
possible to run "make check" for qemu-system-tricore for example).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-6-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to enable 127 in the "auto" group, but it only works if
virtio-scsi and scsi-hd are available - which is not the case with
QEMU binaries like qemu-system-tricore for example, so we need a
proper check for the availability of these devices here.
A very similar problem exists in iotest 267 - it has been added to
the "auto" group already, but requires virtio-blk and thus currently
fails with qemu-system-tricore for example. Let's also add aproper
check there.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-5-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
