When using the "-device" option, the property is called "mac".
"macaddr" is only used for the legacy "-net nic" option.
Reported-by: Harald Hoyer <harald@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fixing cache-clean-interval documentation following the recent change to
a default of 600 seconds on supported plarforms (only Linux currently).
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The default cache-clean-interval is set to 10 minutes, in order to lower
the overhead of the qcow2 caches (before the default was 0, i.e.
disabled).
* For non-Linux platforms the default is kept at 0, because
cache-clean-interval is not supported there yet.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The upper limit on the L2 cache size is increased from 1 MB to 32 MB
on Linux platforms, and to 8 MB on other platforms (this difference is
caused by the ability to set intervals for cache cleaning on Linux
platforms only).
This is done in order to allow default full coverage with the L2 cache
for images of up to 256 GB in size (was 8 GB). Note, that only the
needed amount to cover the full image is allocated. The value which is
changed here is just the upper limit on the L2 cache size, beyond which
it will not grow, even if the size of the image will require it to.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sufficient L2 cache can noticeably improve the performance when using
large images with frequent I/O.
Previously, unless 'cache-size' was specified and was large enough, the
L2 cache was set to a certain size without taking the virtual image size
into account.
Now, the L2 cache assignment is aware of the virtual size of the image,
and will cover the entire image, unless the cache size needed for that is
larger than a certain maximum. This maximum is set to 1 MB by default
(enough to cover an 8 GB image with the default cluster size) but can
be increased or decreased using the 'l2-cache-size' option. This option
was previously documented as the *maximum* L2 cache size, and this patch
makes it behave as such, instead of as a constant size. Also, the
existing option 'cache-size' can limit the sum of both L2 and refcount
caches, as previously.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These options likely do not work as expected as soon as the user
tries to use more than one network interface at once. The parameters
have been marked as deprecated since QEMU v2.6, so users had plenty
of time to move their scripts to the new syntax. Time to remove the
old parameters now.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Deprecated since two releases, nobody complained, thus it's time to
remove them now.
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's the same as -no-user-config and marked as deprecated since three
releases already. Time to remove it now.
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "-balloon" option has been replaced by "-device virtio-balloon".
It's been marked as deprecated since two releases, and nobody
complained, so let's remove it now.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 'tls-creds' option accepts the name of a TLS credentials
object. This replaced the usage of 'tls', 'x509' and 'x509verify'
options in 2.5.0. These deprecated options were grandfathered in
when the deprecation policy was introduded in 2.10.0, so can now
finally be removed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180725092751.21767-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This includes nvdimm persistence fixes queued before the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbepoTAAoJECgfDbjSjVRpLioH/3BPps8FLh4x2gZSq3B+u72O
RYUA3I3TilEGyc9yf8o7e1Hf+pQAJBEmulcnKxXFVWZIJ1GVLPt4NZCMQGiPDnJL
+RCT/Q64PUy09hRjddAasikrvXa4YOsRgBgJJToO7v9PSQSaU3fC7O3hNea7KcF/
C4SSqkUgxyDhCCYHHblpKxFz/wtwy4ZaCGSdozIdmKNPJ6/ye8wOQ1Mq9e1Mwp18
S6ilJub5IwB6aM2KVMmX4AFomF4u2cn153ts8fI+Dyo4/NE6P4+viDlz3BOBKdzm
kmd49h6/n4Lenoo4oI1yNHSuIJJTVfvnoLu6rG7mPbQKgxNd1uN4KuUIygU5PCY=
=Xcaj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc: fixes
This includes nvdimm persistence fixes queued before the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 20 Aug 2018 11:38:11 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
migration/ram: ensure write persistence on loading all data to PMEM.
migration/ram: Add check and info message to nvdimm post copy.
mem/nvdimm: ensure write persistence to PMEM in label emulation
hostmem-file: add the 'pmem' option
configure: add libpmem support
memory, exec: switch file ram allocation functions to 'flags' parameters
memory, exec: Expose all memory block related flags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This option has been deprecated for two releases; remove it.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This reinstates commit b008326744,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
The -drive option serial was deprecated in QEMU 2.10. It's time to
remove it.
Tests need to be updated to set the serial number with -global instead
of using the -drive option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This reinstates commit eae3bd1eb7,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
The -drive option addr was deprecated in QEMU 2.10. It's time to remove
it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This reinstates commit a7aff6dd10,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
The -drive options cyls, heads, secs and trans were deprecated in
QEMU 2.10. It's time to remove them.
hd-geo-test tested both the old version with geometry options in -drive
and the new one with -device. Therefore the code using -drive doesn't
have to be replaced there, we just need to remove the -drive test cases.
This in turn allows some simplification of the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
When QEMU emulates vNVDIMM labels and migrates vNVDIMM devices, it
needs to know whether the backend storage is a real persistent memory,
in order to decide whether special operations should be performed to
ensure the data persistence.
This boolean option 'pmem' allows users to specify whether the backend
storage of memory-backend-file is a real persistent memory. If
'pmem=on', QEMU will set the flag RAM_PMEM in the RAM block of the
corresponding memory region. If 'pmem' is set while lack of libpmem
support, a error is generated.
Signed-off-by: Junyan He <junyan.he@intel.com>
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU options have a single dash (but also work as double dash for
convenience and compatibility). Most options are listed with single
dash in command line help but some were listed with two dashes.
Normalize these to have the same format as the others.
Left --preconfig as that is mentioned as double dash everywhere so I
assume that is the preferred form for that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20180716193312.A5BA17456B9@zero.eik.bme.hu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Committing to the current --preconfig / exit-preconfig interface
before it has seen any use is premature. Mark both as experimental,
the former in documentation, the latter by renaming it to
x-exit-preconfig.
See the previous commit for more detailed rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180705091402.26244-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
[Straightforward conflict with commit 514337c142 resolved]
This reverts commit a7aff6dd10.
Hold off removing this for one more QEMU release (current libvirt
release still uses it.)
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit eae3bd1eb7.
Reverted to avoid conflicts for geometry options revert.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit b008326744.
Hold off removing this for one more QEMU release (current libvirt
release still uses it.)
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pre-Shared Keys (PSK) is a simpler mechanism for enabling TLS
connections than using certificates. It requires only a simple secret
key:
$ mkdir -m 0700 /tmp/keys
$ psktool -u rjones -p /tmp/keys/keys.psk
$ cat /tmp/keys/keys.psk
rjones:d543770c15ad93d76443fb56f501a31969235f47e999720ae8d2336f6a13fcbc
The key can be secretly shared between clients and servers. Clients
must specify the directory containing the "keys.psk" file and a
username (defaults to "qemu"). Servers must specify only the
directory.
Example NBD client:
$ qemu-img info \
--object tls-creds-psk,id=tls0,dir=/tmp/keys,username=rjones,endpoint=client \
--image-opts \
file.driver=nbd,file.host=localhost,file.port=10809,file.tls-creds=tls0,file.export=/
Example NBD server using qemu-nbd:
$ qemu-nbd -t -x / \
--object tls-creds-psk,id=tls0,endpoint=server,dir=/tmp/keys \
--tls-creds tls0 \
image.qcow2
Example NBD server using nbdkit:
$ nbdkit -n -e / -fv \
--tls=on --tls-psk=/tmp/keys/keys.psk \
file file=disk.img
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With this flag, kvm allows guest to control host CPU power state. This
increases latency for other processes using same host CPU in an
unpredictable way, but if decreases idle entry/exit times for the
running VCPU, so to use it QEMU needs a hint about whether host CPU is
overcommitted, hence the flag name.
Follow-up patches will expose this capability to guest
(using mwait leaf).
Based on a patch by Wanpeng Li <kernellwp@gmail.com> .
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20180622192148.178309-2-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We currently have got three ways of turning on the HAX accelerator:
"-machine accel=hax", "-accel hax" and "-enable-hax". That's really
confusing and overloaded. Since "-accel" is our preferred way to enable
an accelerator nowadays, and "-accel hax" is even less to type than
"-enable-hax", let's deprecate the "-enable-hax" option now.
Note: While "-enable-kvm" is available since a long time and can hardly be
removed since it is used in a lot of upper layer tools and scripts, the
"-enable-hax" option is still rather new and not very widespread yet, so
I think that it should be OK if we remove this in a couple of releases again
(we'll see whether someone complains after seeing the deprecation message -
then we could still reconsider to keep it if there a well-founded reasons).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1529950933-28347-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The newline was removed by commit c97d6d2c, and broke -help output:
Before this patch:
$ qemu-system-x86_64 -help | grep smp
thread=single|multi (enable multi-threaded TCG)-smp [...]
After this patch:
$ qemu-system-x86_64 -help | grep smp
-smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
Fixes: c97d6d2cdf
Cc: Sergio Andres Gomez Del Real <sergio.g.delreal@gmail.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180611195607.3015-1-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The -drive option serial was deprecated in QEMU 2.10. It's time to
remove it.
Tests need to be updated to set the serial number with -global instead
of using the -drive option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
The -drive option addr was deprecated in QEMU 2.10. It's time to remove
it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
The -drive options cyls, heads, secs and trans were deprecated in
QEMU 2.10. It's time to remove them.
hd-geo-test tested both the old version with geometry options in -drive
and the new one with -device. Therefore the code using -drive doesn't
have to be replaced there, we just need to remove the -drive test cases.
This in turn allows some simplification of the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This patch will allow the user to include the domainname option in
replies from the built-in DHCP server.
Signed-off-by: Benjamin Drung <benjamin.drung@profitbricks.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This option allows pausing QEMU in the new RUN_STATE_PRECONFIG state,
allowing the configuration of QEMU from QMP before the machine jumps
into board initialization code of machine_run_board_init()
The intent is to allow management to query machine state and additionally
configure it using previous query results within one QEMU instance
(i.e. eliminate the need to start QEMU twice, 1st to query board specific
parameters and 2nd for actual VM start using query results for
additional parameters).
The new option complements -S option and could be used with or without
it. The difference is that -S pauses QEMU when the machine is completely
initialized with all devices wired up and ready to execute guest code
(QEMU needs only to unpause VCPUs to let guest execute its code),
while the "preconfig" option pauses QEMU early before board specific init
callback (machine_run_board_init) is executed and allows the configuration
of machine parameters which will be used by board init code.
When early introspection/configuration is done, command 'exit-preconfig'
should be used to exit RUN_STATE_PRECONFIG and transition to the next
requested state (i.e. if -S is used then QEMU will pause the second
time when board/device initialization is completed or start guest
execution if -S isn't provided on CLI)
PS:
Initially 'preconfig' is planned to be used for configuring numa
topology depending on board specified possible cpus layout.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1526059483-42847-1-git-send-email-imammedo@redhat.com>
[ehabkost: Changed "since 2.13" to "since 3.0"]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJa+UAZAAoJEO8Ells5jWIRTJIIAIcpNROupxHEfcAQKU7lIqys
qx/FxKp+lknzzQMwUfmZwT3PuBD+tWuE7ugXgzjVulvE11F+Z3QBPTDBtOObaMa1
qpgIF3zzrNxtuWMc/72Q8/wEE1wtBUo+WTAGw9Xp1dVomYOOsg1wa7dsKdZhRfz7
nIwDW2ftw3/mx+uTW2/a163v+IDDL9L+HOLibQHWUxOMM39ASchiqAXLF4mfhpwH
xr0OPd7wtcmrDsD/CLbdkGCJ/+vsXnY8pzNmy1RjJuDpWpqlgYpJJPtLBfXBo9VA
91sz5+KryzjpXXzKcQuhiU020O1dIKIe3PWqK6z0x0UjtZ1Yox5adZ3eFomHHwU=
=bIws
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 14 May 2018 08:51:53 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net: Get rid of 'vlan' terminology and use 'hub' instead in the doc files
net: Get rid of 'vlan' terminology and use 'hub' instead in the source files
net: Remove the deprecated "vlan" parameter
net: Fix memory leak in net_param_nic()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's been marked as deprecated since QEMU v2.9.0, so that should have
been enough time for everybody to either just drop unnecessary "vlan=0"
parameters, to switch to the modern -device + -netdev syntax for connecting
guest NICs with host network backends, or to switch to the "hubport" netdev
in case hubs are really wanted instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We've never documented this option in our qemu-doc, so apart from the users
that already used the old qemu-kvm fork before, most users should not be
aware of this option at all. It's been marked as deprecated in the source
code for a long time already, and officially marked as deprecated in the
documentation since QEMU v2.10, so it should be fine to remove this now.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-5-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Deprecated since the beginning when it was added for compatibility with
the ancient qemu-kvm fork of QEMU, and it even printed out the deprecation
warning since right from the start (i.e. QEMU v1.3.0), so it's really time
to remove this now.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-4-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The -tdf options has been removed with d07aa197c5,
but apparently I forgot to remove the corresponding two lines from
qemu-options.hx, so this option is still "available" and just silently
ignored. Kill it now for good.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-2-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qemu-doc already states that this option is only maintained for
backward compatibility and "-device virtconsole" should be used
instead. So let's take the next step and mark this option officially
as deprecated.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525446790-16139-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows the caller to specify a uid and gid to use, even if there
is no corresponding password entry. This will be useful in certain
Xen configurations.
We don't support just -runas <uid> because: (i) deprivileging without
calling setgroups would be ineffective (ii) given only a uid we don't
know what gid we ought to use (since uids may eppear in multiple
passwd file entries with different gids).
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Daniel P. Berrange <berrange@redhat.com>
CC: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This was added in 13f1243, but is missing from qemu-options.hx
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
"-net" is clearly a legacy option. Yet we still use it in almost all
examples in the qemu documentation, and many other spots in the network
chapter. We should make it less prominent that users are not lured into
using it so often anymore. So instead of starting the network chapter with
"-net nic" and documenting "-net <backend>" below "-netdev <backend>"
everywhere, all the "-net" related documentation is now moved to the end
of the chapter. The new "-nic" option is moved to the beginning of the
chapter instead, with a new example that should demonstrate how "-nic"
can be used to shortcut "-device" with "-netdev". The examples in this
chapter are changed to use the "-device" and "-netdev" options or
"-nic" instead of "-net nic -net <backend>".
While we're at it, also remove a legacy remark about very old Linux
distributions. Also remove the "[...]" from the examples in this chapter
since we are not using this ellipsis in any other examples in our docu-
mentation.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We have a clear replacement, so let's deprecate it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-8-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a new memory encryption object 'sev-guest'. The object will be used
to create encrypted VMs on AMD EPYC CPU. The object provides the properties
to pass guest owner's public Diffie-hellman key, guest policy and session
information required to create the memory encryption context within the
SEV firmware.
e.g to launch SEV guest
# $QEMU \
-object sev-guest,id=sev0 \
-machine ....,memory-encryption=sev0
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When CPU supports memory encryption feature, the property can be used to
specify the encryption object to use when launching an encrypted guest.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two issues with the documentation of the --balloon parameter:
First, "--balloon none" is simply doing nothing. Even if a machine had a
balloon device by default, this option is not disabling anything, it is
simply ignored. Thus let's simply drop this option from the documentation
to avoid to confuse the users (but keep the code in vl.c for backward
compatibility).
Second, the documentation claims that "--balloon virtio" is the default
mode, but this is not true anymore since commit 382f074371.
Since that commit, the option also has no real use case anymore, since
you can simply use "--device virtio-balloon" nowadays instead. Thus to
simplify our complex parameter zoo a little bit, let's deprecate the
the parameter now and tell the user to use "--device virtio-balloon"
instead.
Fixes: 382f074371
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1519796303-13257-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The legacy "-net" option can be quite confusing for the users since most
people do not expect to get a "vlan" hub between their emulated guest
hardware and the host backend. But so far, we are also not able to get
rid of "-net" completely, since it is the only way to configure on-board
NICs that can not be instantiated via "-device" yet. It's also a little
bit shorter to type "-net nic -net tap" instead of "-device xyz,netdev=n1
-netdev tap,id=n1".
So what we need is a new convenience option that is shorter to type than
the full -device + -netdev stuff, and which can be used to configure the
on-board NICs that can not be handled via -device yet. Thus this patch now
provides such a new option "--nic": It adds an entry in the nd_table to
configure a on-board / default NIC, creates a host backend and connects
the two directly, without a confusing "vlan" hub inbetween.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
"-net dump" has been marked as deprecated since QEMU v2.10, since it
only works with the deprecated 'vlan' parameter (or hubs). Network
dumping should be done with "-object filter-dump" nowadays instead.
Since nobody complained so far about the deprecation message, let's
finally get rid of "-net dump" now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
According to net/Makefile.objs we only link in the vhost-user code
if CONFIG_POSIX has been set. So the help screen should also only
show this information if CONFIG_POSIX has been defined.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Currently only file backed memory backend can
be created with a "share" flag in order to allow
sharing guest RAM with other processes in the host.
Add the "share" flag also to RAM Memory Backend
in order to allow remapping parts of the guest RAM
to different host virtual addresses. This is needed
by the RDMA devices in order to remap non-contiguous
QEMU virtual addresses to a contiguous virtual address range.
Moved the "share" flag to the Host Memory base class,
modified phys_mem_alloc to include the new parameter
and a new interface memory_region_init_ram_shared_nomigrate.
There are no functional changes if the new flag is not used.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
The spaces between the parameters in the chardev and tpmdev sections
are rather confusing than helpful, and prevent that the lists can be
copy-n-pasted easily for real usage. We also don't use such spaces
in other sections in the documentation, e.g. with the -netdev option,
so let's be consistent and remove the spaces in the chardev and tpmdev
sections, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Introduces the configure support for the new Windows Hypervisor Platform that
allows for hypervisor acceleration from usermode components on the Windows
platform.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1516655269-1785-2-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new memory backend, similar to hostmem-file, except that it
doesn't need to create files. It also enforces memory sealing.
This backend is mainly useful for sharing the memory with other
processes.
Note that Linux supports transparent huge-pages of shmem/memfd memory
since 4.8. It is relatively easier to set up THP than a dedicate
hugepage mount point by using "madvise" in
/sys/kernel/mm/transparent_hugepage/shmem_enabled.
Since 4.14, memfd allows to set hugetlb requirement explicitly.
Pending for merge in 4.16 is memfd sealing support for hugetlb backed
memory.
Usage:
-object memory-backend-memfd,id=mem1,size=1G
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180201132757.23063-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The vlan concept is marked as deprecated, so we should not use
this for examples in the documentation anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
QEMU can emulate hubs to connect NICs and netdevs. This is currently
primarily used for the mis-named 'vlan' feature of the networking
subsystem. Now the 'vlan' feature has been marked as deprecated, since
its name is rather confusing and the users often rather mis-configure
their network when trying to use it. But while the 'vlan' parameter
should be removed at one point in time, the basic idea of emulating
a hub in QEMU is still good: It's useful for bundling up the output of
multiple NICs into one single l2tp netdev for example.
Now to be able to use the hubport feature without 'vlan's, there is one
missing piece: The possibility to connect a hubport to a netdev, too.
This patch adds this possibility by introducing a new "netdev=..."
parameter to the hubports.
To bundle up the output of multiple NICs into one socket netdev, you can
now run QEMU with these parameters for example:
qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \
-netdev hubport,hubid=1,id=h1,netdev=s1 \
-netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \
-netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3
For using the socket netdev, you have got to start another QEMU as the
receiving side first, for example with network dumping enabled:
qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \
-device ne2k_isa,netdev=s0 \
-object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat
After the ppc64 guest tried to boot from both NICs, you can see in the
dump file (using Wireshark, for example), that the output of both NICs
(the e1000 and the virtio-net-pci) has been successfully transfered
via the socket netdev in this case.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The option have been marked as deprecated since QEMU 2.10, and so far
nobody complained that the host, serial, disk and net options are urgently
required anymore. So let's now get rid at least of this legacy pile, to
simplify the usb code quite a bit.
This patch removes the usbdevices host, serial, disk and net. These devices
use their own complicated parameter parsing mechanisms, so they are just
ugly to maintain, without real benefit for the users (the users can use the
corresponding "-device" parameters instead which have the same complexity
as the "-usbdevice" devices here).
Note that the other rather simple -usbdevice options (mouse, tablet, etc.)
are not removed yet (the code is really simple here, so it does not hurt
much to keep it), as well as the two devices "braille" and "bt" which are
easier to use with -usbdevice than with -device.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1515519171-20315-1-git-send-email-thuth@redhat.com
[kraxel] delete some usb_host_device_open() leftovers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When mmap(2) the backend files, QEMU uses the host page size
(getpagesize(2)) by default as the alignment of mapping address.
However, some backends may require alignments different than the page
size. For example, mmap a device DAX (e.g., /dev/dax0.0) on Linux
kernel 4.13 to an address, which is 4K-aligned but not 2M-aligned,
fails with a kernel message like
[617494.969768] dax dax0.0: qemu-system-x86: dax_mmap: fail, unaligned vma (0x7fa37c579000 - 0x7fa43c579000, 0x1fffff)
Because there is no common approach to get such alignment requirement,
we add the 'align' option to 'memory-backend-file', so that users or
management utils, which have enough knowledge about the backend, can
specify a proper alignment via this option.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171211072806.2812-2-haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[ehabkost: fixed typo, fixed error_setg() format string]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It's been marked as deprecated since QEMU v2.10.0, and so far nobody
complained that we should keep it, so let's remove this legacy option
now to simplify the code quite a bit.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This file begins tracking the files that will be the code base for HVF
support in QEMU. This code base is part of Google's QEMU version of
their Android emulator, and can be found at
https://android.googlesource.com/platform/external/qemu/+/emu-master-dev
This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted
Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is
appropriately licensed under GPL v2-or-later, except for the code inside
x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel),
is licensed GPL v2-only.
This code base already implements a very great deal of functionality,
although Google's version removed from Vertuu's the support for APIC
page and hyperv-related stuff. According to the Android Emulator Release
Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now
enabled by default on macOS for 32-bit x86 images to improve performance
and macOS compatibility", although we better use with caution for, as the
same Revision warns us, "If you experience issues with it specifically,
please file a bug report...". The code hasn't seen much update in the
last 5 months, so I think that we can further develop the code with
occasional visiting Google's repository to see if there has been any
update.
On top of Google's code, the following changes were made:
- add code to the configure script to support the --enable-hvf argument.
If the OS is Darwin, it checks for presence of HVF in the system. The
patch also adds strings related to HVF in the file qemu-options.hx.
QEMU will only support the modern syntax style '-M accel=hvf' no enable
hvf; the legacy '-enable-hvf' will not be supported.
- fix styling issues
- add glue code to cpus.c
- move HVFX86EmulatorState field to CPUX86State, changing the
the emulation functions to have a parameter with signature 'CPUX86State *'
instead of 'CPUState *' so we don't have to get the 'env'.
Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com>
Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Looks like we missed to document that it is also possible to specify
a netdev with "-net nic" - which is very useful if you want to
configure your on-board NIC to use a backend that has been specified
with "-netdev".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It's only printing a warning since QEMU v1.3.0, so nobody should use
this anymore today. Let's get rid of this now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1513619065-31722-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002140307.5292-6-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
-iscsi ended up under the "Device URL Syntax" heading by a sequence of
errors, as explained in the previous commit. Move it under the "Block
device options" heading. Nothing left under "Device URL Syntax";
drop the heading.
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002140307.5292-5-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Commit 0f5314a (v1.0) added section "Device URL Syntax" to
qemu-options.hx. It's enclosed in STEXI..ETEXI, thus affects only
qemu-options.texi, not --help. It appears as a subsection under
section "Invocation". Similarly, qemu.1 has it as a subsection under
"OPTIONS".
Commit f9dadc9 (v1.1.0) dropped new option -iscsi into the middle of
this section. No effect on qemu-options.texi. It appears in --help
run together with the "Bluetooth(R) options:" header.
Commit c70a01e (v1.5.0) gives it is own heading in --help by moving
commit 0f5314a's DEFHEADING(Device URL Syntax:) outside STEXI..ETEXI.
Trouble is the heading makes no sense for -iscsi.
Move all of the "Device URL Syntax" Texinfo to qemu-doc.texi. Mark it
for inclusion in qemu.1 with '@c man begin NOTES'. This turns it into
a separate section outside the list of options both in qemu-doc and in
qemu.1.
There's substantial overlap with the existing qemu-doc section "Disk
Images". Mark with a TODO comment.
Output of --help will be fixed next.
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002140307.5292-4-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
[Unwanted @node dropped]
The table of option parameters lacks @table and @end table. The
parameters become items in the enclosing table of options. Screwed up
when l2tpv3 was added in commit 3fb69aa. Fix the obvious way.
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002140307.5292-3-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Commit 43f187a broke --help: it put colons into blank lines. It
removed the colon from DEFHEADING(TITLE:) and added it back in the
macro expansion of DEFHEADING(TITLE), so hxtool can emit "@subsection
TITLE" more easily. Trouble is it's added back even for the blank
lines made with DEFHEADING().
Put the colons back where they were before commit 43f187a, and strip
them in hxtool instead.
Cc: Paolo Bonzini <pbonzini@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002140307.5292-2-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
With the cssids unrestricted (commit "s390x/css: unrestrict cssids") the
s390-squash-mcss machine property should not be used. Actually Libvirt
never supported this, so the expectation is that removing it should be
pretty painless. But let's play nice and deprecate it first.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171206144438.28908-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This reverts commit 5e89dc0113 since:
- we should use ID in the spec instead the one used by OEM
- in the future, we should allow changing id through either property
or EEPROM file.
Cc: Stefan Weil <sw@weilnetz.de>
Cc: Michael Nawrocki <michael.nawrocki@gtri.gatech.edu>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Adds a new PCI ID for the i82559a (0x8086 0x1030) interface. The
"x-use-alt-device-id" property controls whether this new ID is to be
used, and is true by default, and set to false in a compat entry.
Signed-off-by: Mike Nawrocki <michael.nawrocki@gtri.gatech.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This change introduces a new TPM backend driver that can communicate with
swtpm(software TPM emulator) using unix domain socket interface. QEMU talks to
the TPM emulator using QEMU's socket-based chardev backend device.
Swtpm uses two Unix sockets for communications, one for plain TPM commands and
responses, and one for out-of-band control messages. QEMU passes the data
socket to be used over the control channel.
The swtpm and associated tools can be found here:
https://github.com/stefanberger/swtpm
The swtpm's control channel protocol specification can be found here:
https://github.com/stefanberger/swtpm/wiki/Control-Channel-Specification
Usage:
# setup TPM state directory
mkdir /tmp/mytpm
chown -R tss:root /tmp/mytpm
/usr/bin/swtpm_setup --tpm-state /tmp/mytpm --createek
# Ask qemu to use TPM emulator with given tpm state directory
qemu-system-x86_64 \
[...] \
-chardev socket,id=chrtpm,path=/tmp/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis,tpmdev=tpm0 \
[...]
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Since 2012 (commit ba6212d8 "Eliminate cpus-x86_64.conf file") we
have no default config files that would be disabled using
-nodefconfig. Update documentation and document -nodefconfig as
deprecated.
Cc: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171004030025.7866-3-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Remove trailing whitespace in qemu-options documentation, as it causes
reproducibility issues depending on the echo implementation used by
the Makefile.
Reported-By: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The new option can be used to indicate that the file contents can
be destroyed and don't need to be flushed to disk when QEMU exits
or when the memory backend object is removed.
Internally, it will trigger a madvise(MADV_REMOVE) call when the
memory backend is removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170824192315.5897-4-ehabkost@redhat.com>
[ehabkost: fixup: improved documentation]
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Zack Cornelius <zack.cornelius@kove.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch adds [,resourcecontrol=deny] to `-sandbox on' option. It
blacklists all process affinity and scheduler priority system calls to
avoid any bigger of the process.
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
This patch adds [,spawn=deny] argument to `-sandbox on' option. It
blacklists fork and execve system calls, avoiding Qemu to spawn new
threads or processes.
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
This patch introduces the new argument
[,elevateprivileges=allow|deny|children] to the `-sandbox on'. It allows
or denies Qemu process to elevate its privileges by blacklisting all
set*uid|gid system calls. The 'children' option will let forks and
execves run unprivileged.
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
This patch introduces the argument [,obsolete=allow] to the `-sandbox on'
option. It allows Qemu to run safely on old system that still relies on
old system calls.
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
The -machine docs did not explain what the versioned machine
types are for, nor that they'll be maintained across
releases.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170725141041.1195-1-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJZbKrNAAoJEO8Ells5jWIRzWkH/0GgEkT5XqSPR8gTixxR5+aT
1+LvlqI861/oR3aZ/1+6nzbFF4RBHO0TJb9v8HovfaOMU/tjaVMOGOD98+rqToa7
2P2BTQo5jfsQhzGj2GBWnjpTqYunUjXdT0jjZAdERGqrNjoFOGhAjFXPvTKL23d5
haDgRQgTh2z4w+rvuHNQ79S8tCDtUGvH1i9fIpWNnVLlv4Lea8XJlm7p2+jNQslF
W2ysoQ6PR/3HihtqMwsh4ZBJAQfhEpJcrcLeq5wWEdg40U2JVA1MjpX0q58X6fRJ
YQ36K0vxmdnxdCK6NnoMLkGqI12aRqJnFEq0Avc3dC2U0OWIfNk4mp8X0Vr8o+s=
=z3QF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 17 Jul 2017 13:17:17 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
virtio-net: fix offload ctrl endian
virtion-net: Prefer is_power_of_2()
docs/colo-proxy.txt: Update colo-proxy usage of net driver with vnet_header
net/filter-rewriter.c: Make filter-rewriter support vnet_hdr_len
net/colo-compare.c: Add vnet packet's tcp/udp/icmp compare
net/colo.c: Add vnet packet parse feature in colo-proxy
net/colo-compare.c: Make colo-compare support vnet_hdr_len
net/colo-compare.c: Introduce parameter for compare_chr_send()
net/colo.c: Make vnet_hdr_len as packet property
net/filter-mirror.c: Add new option to enable vnet support for filter-redirector
net/filter-mirror.c: Make filter mirror support vnet support.
net/filter-mirror.c: Introduce parameter for filter_send()
net/net.c: Add vnet_hdr support in SocketReadState
net: Add vnet_hdr_len arguments in NetClientState
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We add the vnet_hdr_support option for filter-rewriter, default is disabled.
If you use virtio-net-pci or other driver needs vnet_hdr, please enable it.
You can use it for example:
-object filter-rewriter,id=rew0,netdev=hn0,queue=all,vnet_hdr_support
We get the vnet_hdr_len from NetClientState that make us
parse net packet correctly.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add the vnet_hdr_support option for colo-compare, default is disabled.
If you use virtio-net-pci or other driver needs vnet_hdr, please enable it.
You can use it for example:
-object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0,vnet_hdr_support
COLO-compare can get vnet header length from filter,
Add vnet_hdr_len to struct packet and output packet with
the vnet_hdr_len.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add the vnet_hdr_support option for filter-redirector, default is disabled.
If you use virtio-net-pci net driver or other driver needs vnet_hdr, please enable it.
Because colo-compare or other modules needs the vnet_hdr_len to parse
packet, we add this new option send the len to others.
You can use it for example:
-object filter-redirector,id=r0,netdev=hn0,queue=tx,outdev=red0,vnet_hdr_support
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add the vnet_hdr_support option for filter-mirror, default is disabled.
If you use virtio-net-pci or other driver needs vnet_hdr, please enable it.
You can use it for example:
-object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0,vnet_hdr_support
If it has vnet_hdr_support flag, we will change the sending packet format from
struct {int size; const uint8_t buf[];} to {int size; int vnet_hdr_len; const uint8_t buf[];}.
make other module(like colo-compare) know how to parse net packet correctly.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The current VNC default keyboard delay is 1ms. With that we're constantly
typing faster than the guest receives keyboard events from an XHCI attached
USB HID device.
The default keyboard delay time in the input layer however is 10ms. I don't know
how that number came to be, but empirical tests on some OpenQA driven ARM
systems show that 10ms really is a reasonable default number for the delay.
This patch moves the VNC delay also to 10ms. That way our default is much
safer (good!) and also consistent with the input layer default (also good!).
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1499863425-103133-1-git-send-email-agraf@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
POSIX says that backslashes in the arguments to 'echo', as well as
any use of 'echo -n' and 'echo -e', are non-portable; it recommends
people should favor 'printf' instead. This is definitely true where
we do not control which shell is running (such as in makefile snippets
or in documentation examples). But even for scripts where we
require bash (and therefore, where echo does what we want by default),
it is still possible to use 'shopt -s xpg_echo' to change bash's
behavior of echo. And setting a good example never hurts when we are
not sure if a snippet will be copied from a bash-only script to a
general shell script (although I don't change the use of non-portable
\e for ESC when we know the running shell is bash).
Replace 'echo -n "..."' with 'printf %s "..."', and 'echo -e "..."'
with 'printf %b "...\n"', with the optimization that the %s/%b
argument can be omitted if the string being printed is a strict
literal with no '%', '$', or '`' (we could technically also make
this optimization when there are $ or `` substitutions but where
we can prove their results will not be problematic, but proving
that such substitutions are safe makes the patch less trivial
compared to just being consistent).
In the qemu-iotests check script, fix unusual shell quoting
that would result in word-splitting if 'date' outputs a space.
In test 051, take an opportunity to shorten the line.
In test 068, get rid of a pointless second invocation of bash.
CC: qemu-trivial@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170703180950.9895-1-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's never documented, and now we have one more parameter for it (which
obsoletes this one). Document it properly.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1499396048-21657-1-git-send-email-peterx@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Removed 'Although now' commit message as per Eduardo's review
We likely do not want to carry these legacy -drive options along forever.
Let's emit a deprecation warning for the -drive options that have a
replacement with the -device option, so that the (hopefully few) remaining
users are aware of this and can adapt their scripts / behaviour accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In mapped security modes, files are created with very restrictive
permissions (600 for files and 700 for directories). This makes
file sharing between virtual machines and users on the host rather
complicated. Imagine eg. a group of users that need to access data
produced by processes on a virtual machine. Giving those users access
to the data will be difficult since the group access mode is always 0.
This patch makes the default mode for both files and directories
configurable. Existing setups that don't know about the new parameters
keep using the current secure behavior.
Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
This documents the driver-specific options for the raw, qcow2 and file
block drivers for the man page. For everything else, we refer to the
QAPI documentation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds documentation for the -blockdev options that apply to all
nodes independent of the block driver used.
All options that are shared by -blockdev and -drive are now explained in
the section for -blockdev. The documentation of -drive mentions that all
-blockdev options are accepted as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The help text for the thread sub option of the accel option is missing
a newline at the end. This is annoying as it makes it hard to see the
help text for the next option.
Add the new line so that the following option help text (-smp) is
displayed on a new line rather on the same line and directly after
the thread help.
Before patch:
-accel [accel=]accelerator[,thread=single|multi]
select accelerator (kvm, xen, hax or tcg; use 'help' for a list)
thread=single|multi (enable multi-threaded TCG)-smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
set the number of CPUs to 'n' [default=1]
maxcpus= maximum number of total cpus, including
offline CPUs for hotplug, etc
cores= number of CPU cores on one socket
threads= number of threads on one CPU core
sockets= number of discrete sockets in the system
After patch:
-accel [accel=]accelerator[,thread=single|multi]
select accelerator (kvm, xen, hax or tcg; use 'help' for a list)
thread=single|multi (enable multi-threaded TCG)
-smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
set the number of CPUs to 'n' [default=1]
maxcpus= maximum number of total cpus, including
offline CPUs for hotplug, etc
cores= number of CPU cores on one socket
threads= number of threads on one CPU core
sockets= number of discrete sockets in the system
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The '-usbdevice' option is considered as deprecated nowadays and
we might want to remove these options in a future version of QEMU.
So mark this options as deprecated in the documenation and print out
a warning if it is used to tell the user what to use instead.
While we're at it, improve also some other minor USB-related spots
in qemu-options.hx that were not up to date anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1495175716-12735-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We want to support real (i.e. not virtual) channel devices
even for guests that do not support MCSS-E (where guests may
see devices from any channel subsystem image at once). As all
virtio-ccw devices are in css 0xfe (and show up in the default
css 0 for guests not activating MCSS-E), we need an option to
squash both the virtio subchannels and e.g. passed-through
subchannels from their real css (0-3, or 0 for hosts not
activating MCSS-E) into the default css. This will be
exploited in a later patch.
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-4-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Highlights:
* New "-numa cpu" option
* NUMA distance configuration
* migration/i386 vmstatification
-----BEGIN PGP SIGNATURE-----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=48wH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue, 2017-05-11
Highlights:
* New "-numa cpu" option
* NUMA distance configuration
* migration/i386 vmstatification
# gpg: Signature made Thu 11 May 2017 08:16:07 PM BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: Note: This key has expired!
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* ehabkost/tags/x86-and-machine-pull-request: (29 commits)
migration/i386: Remove support for pre-0.12 formats
vmstatification: i386 FPReg
migration/i386: Remove old non-softfloat 64bit FP support
tests: check -numa node,cpu=props_list usecase
numa: add '-numa cpu,...' option for property based node mapping
numa: remove node_cpu bitmaps as they are no longer used
numa: use possible_cpus for not mapped CPUs check
machine: call machine init from wrapper
numa: remove no longer need numa_post_machine_init()
tests: numa: add case for QMP command query-cpus
QMP: include CpuInstanceProperties into query_cpus output output
virt-arm: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
spapr: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
pc: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
numa: do default mapping based on possible_cpus instead of node_cpu bitmaps
numa: mirror cpu to node mapping in MachineState::possible_cpus
numa: add check that board supports cpu_index to node mapping
virt-arm: add node-id property to CPU
pc: add node-id property to CPU
spapr: add node-id property to sPAPR core
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
legacy cpu to node mapping is using cpu index values to map
VCPU to node with help of '-numa node,nodeid=node,cpus=x[-y]'
option. However cpu index is internal concept and QEMU users
have to guess /reimplement qemu's logic/ to map it to
a concrete cpu socket/core/thread to make sane CPUs
placement across numa nodes.
This patch allows to map cpu objects to numa nodes using
the same properties as used for cpus with -device/device_add
(socket-id/core-id/thread-id/node-id).
At present valid properties/values to address CPUs could be
fetched using hotpluggable-cpus monitor/qmp command, it will
require user to start qemu twice when creating domain to fetch
possible CPUs for a machine type/-smp layout first and
then the second time with numa explicit mapping for actual
usage. The first step results could be saved and reused to
set/change mapping later as far as machine type/-smp stays
the same.
Proposed impl. supports exact and wildcard matching to
simplify CLI and allow to set mapping for a specific cpu
or group of cpu objects specified by matched properties.
For example:
# exact mapping x86
-numa cpu,node-id=x,socket-id=y,core-id=z,thread-id=n
# exact mapping SPAPR
-numa cpu,node-id=x,core-id=y
# wildcard mapping, all cpu objects that match socket-id=y
# are mapped to node-id=x
-numa cpu,node-id=x,socket-id=y
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1494415802-227633-18-git-send-email-imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch is going to add SLIT table support in QEMU, and provides
additional option `dist` for command `-numa` to allow user set vNUMA
distance by QEMU command.
With this patch, when a user wants to create a guest that contains
several vNUMA nodes and also wants to set distance among those nodes,
the QEMU command would like:
```
-numa node,nodeid=0,cpus=0 \
-numa node,nodeid=1,cpus=1 \
-numa node,nodeid=2,cpus=2 \
-numa node,nodeid=3,cpus=3 \
-numa dist,src=0,dst=1,val=21 \
-numa dist,src=0,dst=2,val=31 \
-numa dist,src=0,dst=3,val=41 \
-numa dist,src=1,dst=2,val=21 \
-numa dist,src=1,dst=3,val=31 \
-numa dist,src=2,dst=3,val=21 \
```
Signed-off-by: He Chen <he.chen@linux.intel.com>
Message-Id: <1493260558-20728-1-git-send-email-he.chen@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When using a virtfs root filesystem, the mount_tag needs to be set to
/dev/root. This can be done long-hand as
-fsdev local,id=root,path=/path/to/rootfs,...
-device virtio-9p-pci,fsdev=root,mount_tag=/dev/root
but the -virtfs shortcut cannot be used as it hard-codes the device identifier
to match the mount_tag, and device identifiers may not contain '/':
$ qemu-system-x86_64 -virtfs local,path=/foo,mount_tag=/dev/root,security_model=passthrough
qemu-system-x86_64: -virtfs local,path=/foo,mount_tag=/dev/root,security_model=passthrough: duplicate fsdev id: /dev/root
To support this case using -virtfs, we allow the device identifier to be
specified explicitly when the mount_tag is not suitable:
-virtfs local,id=root,path=/path/to/rootfs,mount_tag=/dev/root,...
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since 'hax' is a possible accelerator nowadays, too, the '-accel'
option should support it and we should mention this accelerator
in the documentation, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1493875481-16388-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the user needs to specify the disk geometry, the corresponding
parameters of the "-device ide-hd" option should be used instead.
"-hdachs" is considered as deprecated and might be removed soon.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1493270454-1448-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the user needs to specify the disk geometry, the corresponding
parameters of the "-device ide-hd" option should be used instead.
"-hdachs" is considered as deprecated and might be removed soon.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Here's a respind of my first pull request for qemu-2.10, consisting of
assorted patches which have accumulated while qemu-2.9 stabilized.
Highlights are:
* Rework / cleanup of the XICS interrupt controller
* Substantial improvement to the 'powernv' machine type
- Includes an MMIO XICS version
* POWER9 support improvements
- POWER9 guests with KVM
- Partial support for POWER9 guests with TCG
* IOMMU and VFIO improvements
* Assorted minor changes
There are several IPMI patches here that aren't usually in my area of
maintenance, but there isn't a regular maintainer and these patches
are for the benefit of the powernv machine type.
This pull request supersedes my 2017-04-26 pull request. This new set
fixes a bug in one of the aforementioned IPMI patches which caused
clang sanitizer failures (and may have crashed on some libc / host
versions).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJZAEUCAAoJEGw4ysog2bOS8O4P/01ruoUftX9JCkvqJjReMCjX
h52ygdzkoa24ekc95wjNz9uVjzRavx1AVmd3wty3Po9oPiY7Or8CmvnMoCi2g4Vj
cl2YjneAnaDuv7ud0HObOptfjtJxiNZr1la+gC+z3rIk0CdJ/XmH8Aiw5OhwimnC
2NLL8vxkvIPgjHGJQ4r2YxX6qjhiwBL39DE1YpIKJ1aonh7tgXbrytR34owEphFp
BOQLC0Sk0+GzI9LPlHTe54nQLantFkgzdZYIIA6GX8owtX3Nul/bp3YahdgiPLC1
NOSAyf7CO5+AISWsqrojncd4pTWuCSUfqoRdhSSGrpj3DeFtdiFEtmr8W1NTj+MZ
J9MP/UGQXgI0uLgvhqA41zzy/4OapIWdMczYRwVH8Fb0pFVklhuSQIE1R6V/6L7Q
Gajs6SWczCw0zVyflHXryRdaEyx67gL1Nl0NWgUuSJBt0sdOU9Rh89oNPssJcioy
ZIKCXl5W5uh8xHiFnCnMqbk6YOw15FufiQajideL03QEMztw42ZiejpZObK+yMpA
TnxUsH2p/naQbh5wn4Z+0IUQ6KubX+XstNy/p45aKujvkGHq/L5vI2JNUujIa8EL
x5vTY/zfaSh1k2J1HLm7LvwYnZTS8Mc/TKHKWOV1iGrG+4u89SiuyQq20SqXgNmE
L2SHTJjDxdUDmBWBKCRi
=Nnid
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170426' into staging
ppc patch queue 2017-04-26
Here's a respind of my first pull request for qemu-2.10, consisting of
assorted patches which have accumulated while qemu-2.9 stabilized.
Highlights are:
* Rework / cleanup of the XICS interrupt controller
* Substantial improvement to the 'powernv' machine type
- Includes an MMIO XICS version
* POWER9 support improvements
- POWER9 guests with KVM
- Partial support for POWER9 guests with TCG
* IOMMU and VFIO improvements
* Assorted minor changes
There are several IPMI patches here that aren't usually in my area of
maintenance, but there isn't a regular maintainer and these patches
are for the benefit of the powernv machine type.
This pull request supersedes my 2017-04-26 pull request. This new set
fixes a bug in one of the aforementioned IPMI patches which caused
clang sanitizer failures (and may have crashed on some libc / host
versions).
# gpg: Signature made Wed 26 Apr 2017 07:58:10 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-20170426: (48 commits)
MAINTAINERS: Remove myself from e500
target/ppc: Style fixes
e500,book3s: mfspr 259: Register mapped/aliased SPRG3 user read
target/ppc: Flush TLB on write to PIDR
spapr-cpu-core: Release ICPState object during CPU unrealization
ppc/pnv: generate an OEM SEL event on shutdown
ppc/pnv: add initial IPMI sensors for the BMC simulator
ppc/pnv: populate device tree for IPMI BT devices
ppc/pnv: populate device tree for serial devices
ppc/pnv: populate device tree for RTC devices
ppc/pnv: scan ISA bus to populate device tree
ppc/pnv: enable only one LPC bus
ppc/pnv: Add support for POWER8+ LPC Controller
spapr: remove the 'nr_servers' field from the machine
target/ppc: Fix size of struct PPCElfPrstatus
ipmi: introduce an ipmi_bmc_gen_event() API
ipmi: introduce an ipmi_bmc_sdr_find() API
ipmi: provide support for FRUs
ipmi: use a file to load SDRs
ppc: add IPMI support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OfeB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20170421-v2-tag' into staging
Xen 2017/04/21 + fix
# gpg: Signature made Tue 25 Apr 2017 19:10:37 BST
# gpg: using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# gpg: aka "Stefano Stabellini <sstabellini@kernel.org>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* remotes/sstabellini/tags/xen-20170421-v2-tag: (21 commits)
move xen-mapcache.c to hw/i386/xen/
move xen-hvm.c to hw/i386/xen/
move xen-common.c to hw/xen/
add xen-9p-backend to MAINTAINERS under Xen
xen/9pfs: build and register Xen 9pfs backend
xen/9pfs: send responses back to the frontend
xen/9pfs: implement in/out_iov_from_pdu and vmarshal/vunmarshal
xen/9pfs: receive requests from the frontend
xen/9pfs: connect to the frontend
xen/9pfs: introduce Xen 9pfs backend
9p: introduce a type for the 9p header
xen: import ring.h from xen
configure: use pkg-config for obtaining xen version
xen: additionally restrict xenforeignmemory operations
xen: use libxendevice model to restrict operations
xen: use 5 digit xen versions
xen: use libxendevicemodel when available
configure: detect presence of libxendevicemodel
xen: create wrappers for all other uses of xc_hvm_XXX() functions
xen: rename xen_modified_memory() to xen_hvm_modified_memory()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch provides a simple FRU support for the BMC simulator. FRUs
are loaded from a file which name is specified in the object
properties, each entry having a fixed size, also specified in the
properties. If the file is unknown or not accessible for some reason,
a unique entry of 1024 bytes is created as a default. Just enough to
start some simulation.
These commands complies with the IPMI spec : "34. FRU Inventory Device
Commands".
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
[dwg: Folded in subsequent fix to handle NULL filename]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The IPMI BMC simulator populates the sdr/sensor tables with a minimal
set of entries (Watchdog). But some qemu platforms might want to use
extra entries for their custom needs.
This patch modifies slighty the initializing routine to take into
account a larger set read from a file. The name of the file to use is
defined through a new 'sdr' property of the simulator device.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds a command-line option (-xen-domid-restrict) which will
use the new libxendevicemodel API to restrict devicemodel [1] operations
to the specified domid. (Such operations are not applicable to the xenpv
machine type).
This patch also adds a tracepoint to allow successful enabling of the
restriction to be monitored.
[1] I.e. operations issued by libxendevicemodel. Operation issued by other
xen libraries (e.g. libxenforeignmemory) are currently still unrestricted
but this will be rectified by subsequent patches.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The disk I/O throttling options have been listed for a long time but
never explained on the QEMU man page.
Suggested-by: Nini Gu <ngu@redhat.com>
Cc: Alberto Garcia <berto@igalia.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id: 20170301115026.22621-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Occasionally the users try to mix the bootindex properties with the
"-boot order" parameter - and this likely does not give the expected
results. So let's add a proper statement that these two concepts
should not be used together.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1488303601-23741-1-git-send-email-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new command line option -blockdev works like QMP command
blockdev-add.
The option argument may be given in JSON syntax, exactly as in QMP.
Example usage:
-blockdev '{"node-name": "foo", "driver": "raw", "file": {"driver": "file", "filename": "foo.img"} }'
The JSON argument doesn't exactly blend into the existing option
syntax, so the traditional KEY=VALUE,... syntax is also supported,
using dotted keys to do the nesting:
-blockdev node-name=foo,driver=raw,file.driver=file,file.filename=foo.img
This does not yet support lists, but that will be addressed shortly.
Note that calling qmp_blockdev_add() (say via qmp_marshal_block_add())
right away would crash. We need to stash the configuration for later
instead. This is crudely done, and bypasses QemuOpts, even though
storing configuration is what QemuOpts is for. Need to revamp option
infrastructure to support QAPI types like BlockdevOptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488317230-26248-22-git-send-email-armbru@redhat.com>
Rewrite the -numa documentation to clarify what exactly it does.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170123180632.28942-3-ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- a fix to a minor bug reported by Coverity
- throttling support in the local backend (command line only)
-----BEGIN PGP SIGNATURE-----
iEYEABECAAYFAli1Q64ACgkQAvw66wEB28I5yQCePbLPSOtHO4LJGc2E973L7vH2
hQIAnReLFevyNN6BpivucP2/0YmAIKSi
=uTYd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
This pull request brings:
- a fix to a minor bug reported by Coverity
- throttling support in the local backend (command line only)
# gpg: Signature made Tue 28 Feb 2017 09:32:30 GMT
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "[jpeg image of size 3330]"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
throttle: factor out duplicate code
fsdev: add IO throttle support to fsdev devices
9pfs: fix v9fs_lock error case
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patchset adds the throttle support for the 9p-local driver.
For now this functionality can be enabled only through qemu cli options.
QMP interface and support to other drivers need further extensions.
To make it simple for other 9p drivers, the throttle code has been put in
separate files.
Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
(pass extra NULL CoMutex * argument to qemu_co_queue_wait(),
added options to qemu-options.hx, Greg Kurz)
Signed-off-by: Greg Kurz <groug@kaod.org>
In the vhost-user example, a chardev with id chr0 is referenced by the
vhost-user net backend, but the id is not specified in the chardev option.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We know there will be cases where MTTCG won't work until additional work
is done in the front/back ends to support. It will however be useful to
be able to turn it on.
As a result MTTCG will default to off unless the combination is
supported. However the user can turn it on for the sake of testing.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[AJB: move to -accel tcg,thread=multi|single, defaults]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The sheepdog URL is broken twice: First it uses a duplicated
http:// prefix, second the website seems to have moved to
https://sheepdog.github.io/sheepdog/ instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
The PC machines (pc-q35-* pc-i440fx-* pc-* isapc xenfv) automatically
create lsi53c895a SCSI HBAs and SCSI devices to honor -drive if=scsi.
For giggles, try -drive if=scsi,bus=25,media=cdrom --- this makes QEMU
create 25 of them.
lsi53c895a is thoroughly obsolete (PCI Ultra2 SCSI, ca. 2000), and
currently has no maintainer in QEMU. megasas is a better choice,
except with old OSes that lack drivers. virtio-scsi is a much better
choice when you have a driver, but only (newish) Linux comes with one
in the box. There is no good default that works for all guests.
Encourage users to pick a non-obsolete SCSI HBA that works for them by
deprecating -drive if=scsi.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-4-git-send-email-armbru@redhat.com>
Acked-By: Paolo Bonzini <pbonzini@redhat.com>
When multiple GPU are available, picking the first one isn't always the
best choice. Learn to specify a device rendernode.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170212112118.16044-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The QEMU manual page states that Cirrus Logic is the default video
card if the user doesn't specify any. However this is not true since
QEMU 2.2.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20170127094154.19778-1-berto@igalia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code which interprets the CLI args to populate the SocketAddress
objects for plain & websockets VNC is quite complex already and will
need further enhancements shortly. Refactor it into separate methods
to avoid vnc_display_open getting even larger. As a side effect of
the refactoring, it is now possible to specify a listen address for
the websocket server explicitly. e.g,
-vnc localhost:5900,websockets=0.0.0.0:8080
will listen on localhost for the plain VNC server, but expose the
websockets VNC server on the public interface. This refactoring
also removes the restriction that prevents enabling websockets
when the plain VNC server is listening on a UNIX socket.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-5-berrange@redhat.com
[ kraxel: squashed clang build fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I am pretty sure that's the word Fabrice Bellard intended to write.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Available since commit db418a0a7e
(October 2011, qemu 1.0)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements initial vmstate creation or loading at the start
of record/replay. It is needed for rewinding the execution in the replay mode.
v4 changes:
- snapshots are not created by default anymore
v3 changes:
- added rrsnapshot option
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170124071746.4572.61449.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The curses and none possibilities are already documented on a separate line,
so documenting it on the sdl line was both unneeded and confusing.
Introduced in commit f04ec5afbb
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Remove the duplicated help message for 'kernel_irqchip'.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a new option "--only-migratable" in qemu which will allow to add
only those devices which will not fail qemu after migration. Devices
set with the flag 'unmigratable' cannot be added when this option will
be used.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-3-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use @var{firstcpu} and @var{lastcpu} to make the metasyntatic
variables a bit clearer. While doing this, use @var only around
the metasyntatic variables, not including the square brackets and
hyphen.
The semantics of the "cpus" option will be clarified by rewriting
the whole -numa documentation in a follow-up patch.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170123180632.28942-2-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use the Intel HAX is kernel-based hardware acceleration module for
Windows (similar to KVM on Linux).
Based on the "target/i386: Add Intel HAX to android emulator" patch
from David Chou <david.j.chou@intel.com>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <7b9cae28a0c379ab459c7a8545c9a39762bd394f.1484045952.git.vpalatin@chromium.org>
[Drop hax_populate_ram stub. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the colon, and add it in qemu-options-wrapper.h instead.
The introduction of @subsection also found a case where the table
was not closed and reopened around a heading, so fix it.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document:
1. The new debug and logfile options with their usages
2. New json format and its usage and
3. update "GlusterFS, Device URL Syntax" section in "Invocation"
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Because TFTP does not support byte ranges, it was never usable with our
curl block driver. Since apparently nobody has ever complained loudly
enough for someone to take care of the issue until now, it seems
reasonable to assume that nobody has ever actually used it.
Therefore, it should be safe to just drop it from curl's protocol list.
[Jeff Cody: Below is additional summary pulled, with some rewording,
from followup emails between Max and Markus, to explain what
worked and what didn't]
TFTP would sometimes work, to a limited extent, for images <= the curl
"readahead" size, so long as reads started at offset zero. By default,
that readahead size is 256KB.
Reads starting at a non-zero offset would also have returned data from a
zero offset. It can become more complicated still, with mixed reads at
zero offset and non-zero offsets, due to data buffering.
In short, TFTP could only have worked before in very specific scenarios
with unrealistic expectations and constraints.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20161102175539.4375-4-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
The new cryptodev backend named cryptodev-builtin,
which realized by QEMU cipher APIs. These APIs can
be backed by either nettle or gcrypt.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This option does nothing since commit 06ac27f. Deprecate it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Clean up the documentation for -chardev ringbuf. There is a stray
closing parenthesis and the comma is unnecessary.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The tap backend is already using qemu-bridge-helper to attach tap
interface to a bridge but (unlike the bridge backend) it always uses
the default bridge name - br0.
This adds a "br" property support to the tap backend.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Filter-rewriter is a part of COLO project.
It will rewrite some of secondary packet to make
secondary guest's tcp connection established successfully.
In this module we will rewrite tcp packet's ack to the secondary
from primary,and rewrite tcp packet's seq to the primary from
secondary.
usage:
colo secondary:
-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0
-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1
-object filter-rewriter,id=rew0,netdev=hn0,queue=all
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Updates the help messages to remove misleading information about SDL
being the normal display used.
Signed-off-by: Colin Lord <cdlord2@illinois.edu>
Message-Id: <1471030248-21637-1-git-send-email-cdlord2@illinois.edu>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
since f1d3e58, the code had changed the default value to 'off', so this patch
make document and code are consistent.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-id: 1470024419-10886-1-git-send-email-lizhijian@cn.fujitsu.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The '-display' help information is not very correct. This patch sort
it a little.
Also, in its help information, reveals what implicit display option
will be chosen if no definition.
Signed-off-by: Robert Ho <robert.hu@intel.com>
Message-Id: <1469528231-26206-1-git-send-email-robert.hu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch add the capability of basic vhost net busy polling which is
supported by recent kernel. User could configure the maximum number of
us that could be spent on busy polling through a new property of tap
"poll-us".
Cc: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since iommu devices can be created with '-device' there is
no need to keep iommu as machine and mch property.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This text will be included to qemu-nbd/qemu-img mans in the next patches.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1466174654-30130-3-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[s/descriprion/description/ in commit message as suggested by Eric Blake
<eblake@redhat.com>.
--Stefan]
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1466174654-30130-2-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Switch make rules over to use trace-events-all as the
master trace events input file. Add rule that will
construct trace-events-all from $(trace-events-y).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QEMU compiles a list of data directories from various sources. When
consuming a QEMU binary it's useful to be able to get this list of
data directories: a primary reason is so you can list what BIOSes or
keymaps ship with this version of QEMU. However without reproducing
the method that QEMU uses internally, it's not possible to get the
list of data directories.
This commit adds a simple '-L help' option that just lists out the
data directories as qemu calculates them:
$ ./x86_64-softmmu/qemu-system-x86_64 -L help
/home/rjones/d/qemu/pc-bios
/usr/local/share/qemu
$ ./x86_64-softmmu/qemu-system-x86_64 -L /tmp -L help
/tmp
/home/rjones/d/qemu/pc-bios
/usr/local/share/qemu
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1463416475-11728-2-git-send-email-rjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The -machine kvm_shadow_mem option takes a size in bytes; say
so explicitly in its documentation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Tobi (github.com/tobimensch)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Robert Ho <robert.hu@intel.com>
Message-Id: <1464678190-9290-2-git-send-email-robert.hu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Limits the rate kbd events from the vnc server are forwarded to the
guest, so input devices which are typically low-bandwidth can keep
up even on bulky input.
v2: update documentation too.
v3: spell fixes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Yang Hongyang <hongyang.yang@easystack.cn>
Message-id: 1464762150-25817-1-git-send-email-kraxel@redhat.com
FW CFG's primary user is QEMU, which uses it to expose configuration
information (in the widest sense) to Firmware. Thus the name FW CFG.
FW CFG can also be used by others for their own purposes. QEMU is
merely acting as transport then. Names starting with opt/ are
reserved for such uses. There is no provision, however, to guide safe
sharing among different such users.
Fix that, loosely following QMP precedence: names should start with
opt/RFQDN/, where RFQDN is a reverse fully qualified domain name you
control.
Based on a more ambitious patch from Michael Tsirkin.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The docs for the secret object type specified the wrong number
of bytes for the AES initialization vector.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and
IPv6-only network environments.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Filter-redirector is a netfilter plugin.
It gives qemu the ability to redirect net packet.
redirector can redirect filter's net packet to outdev.
and redirect indev's packet to filter.
filter
+
redirector |
+--------------+
| | |
indev +-----------+ +----------> outdev
| | |
+--------------+
|
v
filter
usage:
-netdev user,id=hn0
-chardev socket,id=s0,host=ip_primary,port=X,server,nowait
-chardev socket,id=s1,host=ip_primary,port=Y,server,nowait
-filter-redirector,id=r0,netdev=hn0,queue=tx/rx/all,indev=s0,outdev=s1
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Filter-mirror is a netfilter plugin.
It gives qemu the ability to mirror
packets to a chardev.
usage:
-netdev tap,id=hn0
-chardev socket,id=mirror0,host=ip_primary,port=X,server,nowait
-filter-mirror,id=m0,netdev=hn0,queue=tx/rx/all,outdev=mirror0
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Rename the recently-added ip6-foo options into ipv6-foo options, to make
them coherent with other ipv6 options.
Also rework the documentation.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW9ErPAAoJEL/70l94x66DJfEH/A/QkMpAhrgNdyVsahzsGrzE
wx5gHFIc1nBYxyr62w4apUb5jPB7zaXu0LA7EAWDeAe0pyP8hZzLT9kJyOEDsuJu
zwKN2QeLSNMtPbnbKN0I/YQ2za2xX1V5ruhSeOJoVslUI214hgnAURaGshhQNzuZ
2CluDT9KgL5cQifAnKs5kJrwhIYShYNQB+1eDC/7wk28dd/EH+sPALIoF+rqrSmt
Zu4Mdqd+9Ns+oKOjA6br9ULq/Hzg0aDfY82J+XLVVqfF3PXQe8rTDmuMf/7jTn+M
Un7ZOcei9oZF2/9vfAfKQpDCcgD9HvOUSbgqV/ubmkPPmN/LNJzeKj0fBhrRN+Y=
=K12D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (28 commits)
target-i386: implement PKE for TCG
config.status: Pass extra parameters
char: translate from QIOChannel error to errno
exec: fix error handling in file_ram_alloc
cputlb: modernise the debug support
qemu-log: support simple pid substitution for logs
target-arm: dfilter support for in_asm
qemu-log: dfilter-ise exec, out_asm, op and opt_op
qemu-log: new option -dfilter to limit output
qemu-log: Improve the "exec" TB execution logging
qemu-log: Avoid function call for disabled qemu_log_mask logging
qemu-log: correct help text for -d cpu
tcg: pass down TranslationBlock to tcg_code_gen
util: move declarations out of qemu-common.h
Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
hw: explicitly include qemu-common.h and cpu.h
include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
Move ParallelIOArg from qemu-common.h to sysemu/char.h
Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
scripts/clean-includes
This patches makes input-linux use -object instead of a new command line
switch. So, instead of the switch ...
-input-linux /dev/input/event$nr
... you must create an object this way:
-object input-linux,id=$name,evdev=/dev/input/event$nr
Bonus is that you can hot-add and hot-remove them via monitor now.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1457681901-30916-1-git-send-email-kraxel@redhat.com
When debugging big programs or system emulation sometimes you want both
the verbosity of cpu,exec et all but don't want to generate lots of logs
for unneeded stuff. This patch adds a new option -dfilter which allows
you to specify interesting address ranges in the form:
-dfilter 0x8000..0x8fff,0xffffffc000080000+0x200,...
Then logging code can use the new qemu_log_in_addr_range() function to
decide if it will output logging information for the given range.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1458052224-9316-7-git-send-email-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds parameters to manage some new options in the qemu -net
command.
Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in
argument to the qemu command.
Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3.
Signed-off-by: Yann Bordenave <meow@meowstars.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This patch adds support for reading input events directly from linux
evdev devices and forward them to the guest. Unlike virtio-input-host
which simply passes on all events to the guest without looking at them
this will interpret the events and feed them into the qemu input
subsystem.
Therefore this is limited to what the qemu input subsystem and the
emulated input devices are able to handle. Also there is no support for
absolute coordinates (tablet/touchscreen). So we are talking here about
basic mouse and keyboard support.
The advantage is that it'll work without virtio-input drivers in the
guest, the events are delivered to the usual ps/2 or usb input devices
(depending on what the machine happens to have). And for keyboards
qemu is able to switch the keyboard between guest and host on hotkey.
The hotkey is hard-coded for now (both control keys), initialy the
guest owns the keyboard.
Probably most useful when assigning vga devices with vfio and using a
physical monitor instead of vnc/spice/gtk as guest display.
Usage: Add '-input-linux /dev/input/event<nr>' to the qemu command
line. Note that udev has rules which populate /dev/input/by-{id,path}
with static names, which might be more convinient to use.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1457087116-4379-2-git-send-email-kraxel@redhat.com
With this property, users can control if this filter is 'on'
or 'off'. The default behavior for filter is 'on'.
For some types of filters, they may need to react to status changing,
So here, we introduced status changing callback/notifier for filter class.
We will skip the disabled ('off') filter when delivering packets in net layer.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
icount sleep takes on or off as options. A few places mention sleep=no
which is not accepted. This patch corrects them.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <1456499811-16819-1-git-send-email-bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Migration of pseries-2.3 doesn't have configuration section. Unfortunately,
QEMU 2.4/2.4.1/2.5 are buggy and always stream and expect the configuration
section, and break migration both ways.
This patch introduces a property which allows to enforce a configuration
section for machines who don't have one.
It can be set at startup:
-machine enforce-config-section=on
or later from the QEMU monitor:
qom-set /machine enforce-config-section on
It is up to the tooling to set or unset this property according to the
version of the QEMU at the other end of the pipe.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds support for dma-buf passing to spice. This makes virtio-gpu
with 3d acceleration work with spice.
Workflow:
* virglrenderer renders the guest command stream into a texture.
* qemu exports the texture as dma-buf and passes on that dma-buf
to spice-server.
* spice-server passes the dma-buf to spice-client, using unix
socket file descriptor passing.
* spice-client asks the window systems composer to render the
dma-buf to the screen.
Requires cutting edge spice (server) and spice-gtk (client) builds,
from git master branch.
Also requires libvirt managing your qemu instance, and using
"virt-viewer --attach $guest". libvirt will connect spice-server and
spice-client using unix sockets instead of tcp sockets then, which
is required for file descriptor passing.
Works for the local case (spice server and client on the same machine)
only. Supporting remote too is planned (by feeding the dma-bufs into
gpu-assisted video encoder), but not there yet.
gl mode is turned off by default, use "-spice gl=on,$otherargs" to
enable it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The current documentation of chardev mux=on is rather brief and opaque;
expand it to hopefully be a bit more helpful.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1455643738-6068-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Microsoft spec about the SLIC and MSDM ACPI tables at
<http://go.microsoft.com/fwlink/p/?LinkId=234834> requires the OEM ID and
OEM Table ID fields to be consistent between the SLIC and the RSDT/XSDT.
That further affects the FADT, because a similar match between the FADT
and the RSDT/XSDT is required by the ACPI spec in general.
This patch wires up the previous three patches.
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86)
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Steven Newbury <steve@snewbury.org.uk>
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758
LP: https://bugs.launchpad.net/qemu/+bug/1533848
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Steven Newbury <steve@snewbury.org.uk>
Print a list of trace points
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-7-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow enabling events without going through a file, for example:
qemu-system-x86_64 -trace bdrv_aio_writev -trace bdrv_aio_readv
or with globbing too:
qemu-system-x86_64 -trace 'bdrv_aio_*'
if an appropriate backend is enabled (simple, stderr, ftrace).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-6-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Mention the ftrace backend too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-2-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This integrates support for QIOChannelTLS object in the TCP
chardev backend. If the 'tls-creds=NAME' option is passed with
the '-chardev tcp' argument, then it will setup the chardev
such that the client is required to establish a TLS handshake
when connecting. There is no support for checking the client
certificate against ACLs in this initial patch. This is pending
work to QOM-ify the ACL object code.
A complete invocation to run QEMU as the server for a TLS
encrypted serial dev might be
$ qemu-system-x86_64 \
-nodefconfig -nodefaults -device sga -display none \
-chardev socket,id=s0,host=127.0.0.1,port=9000,tls-creds=tls0,server \
-device isa-serial,chardev=s0 \
-object tls-creds-x509,id=tls0,endpoint=server,verify-peer=off,\
dir=/home/berrange/security/qemutls
To test with the gnutls-cli tool as the client:
$ gnutls-cli --priority=NORMAL -p 9000 \
--x509cafile=/home/berrange/security/qemutls/ca-cert.pem \
127.0.0.1
If QEMU was told to use 'anon' credential type, then use the
priority string 'NORMAL:+ANON-DH' with gnutls-cli
Alternatively, if setting up a chardev to operate as a client,
then the TLS credentials registered must be for the client
endpoint. First a TLS server must be setup, which can be done
with the gnutls-serv tool
$ gnutls-serv --priority=NORMAL -p 9000 --echo \
--x509cafile=/home/berrange/security/qemutls/ca-cert.pem \
--x509certfile=/home/berrange/security/qemutls/server-cert.pem \
--x509keyfile=/home/berrange/security/qemutls/server-key.pem
Then QEMU can connect with
$ qemu-system-x86_64 \
-nodefconfig -nodefaults -device sga -display none \
-chardev socket,id=s0,host=127.0.0.1,port=9000,tls-creds=tls0 \
-device isa-serial,chardev=s0 \
-object tls-creds-x509,id=tls0,endpoint=client,\
dir=/home/berrange/security/qemutls
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1453202071-10289-5-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Typically a UNIX guest OS will log boot messages to a serial
port in addition to any graphical console. An admin user
may also wish to use the serial port for an interactive
console. A virtualization management system may wish to
collect system boot messages by logging the serial port,
but also wish to allow admins interactive access.
Currently providing such a feature forces the mgmt app
to either provide 2 separate serial ports, one for
logging boot messages and one for interactive console
login, or to proxy all output via a separate service
that can multiplex the two needs onto one serial port.
While both are valid approaches, they each have their
own downsides. The former causes confusion and extra
setup work for VM admins creating disk images. The latter
places an extra burden to re-implement much of the QEMU
chardev backends logic in libvirt or even higher level
mgmt apps and adds extra hops in the data transfer path.
A simpler approach that is satisfactory for many use
cases is to allow the QEMU chardev backends to have a
"logfile" property associated with them.
$QEMU -chardev socket,host=localhost,port=9000,\
server=on,nowait,id-charserial0,\
logfile=/var/log/libvirt/qemu/test-serial0.log
-device isa-serial,chardev=charserial0,id=serial0
This patch introduces a 'ChardevCommon' struct which
is setup as a base for all the ChardevBackend types.
Ideally this would be registered directly as a base
against ChardevBackend, rather than each type, but
the QAPI generator doesn't allow that since the
ChardevBackend is a non-discriminated union. The
ChardevCommon struct provides the optional 'logfile'
parameter, as well as 'logappend' which controls
whether QEMU truncates or appends (default truncate).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1452516281-27519-1-git-send-email-berrange@redhat.com>
[Call qemu_chr_parse_common if cd->parse is NULL. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NFIT is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)
Currently, we only support PMEM mode. Each device has 3 structures:
- SPA structure, defines the PMEM region info
- MEM DEV structure, it has the @handle which is used to associate specified
ACPI NVDIMM device we will introduce in later patch.
Also we can happily ignored the memory device's interleave, the real
nvdimm hardware access is hidden behind host
- DCR structure, it defines vendor ID used to associate specified vendor
nvdimm driver. Since we only implement PMEM mode this time, Command
window and Data window are not needed
The NVDIMM functionality is controlled by the parameter, 'nvdimm', which
is introduced for the machine, there is a example to enable it:
-machine pc,nvdimm -m 8G,maxmem=100G,slots=100 -object \
memory-backend-file,id=mem1,share,mem-path=/tmp/nvdimm1,size=10G -device \
nvdimm,memdev=mem1,id=nv1
It is disabled on default
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add some basic documentation for the IPMI device.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make use of the QCryptoSecret object to support loading of
encrypted x509 keys. The optional 'passwordid' parameter
to the tls-creds-x509 object type, provides the ID of a
secret object instance that holds the decryption password
for the PEM file.
# printf "123456" > mypasswd.txt
# $QEMU \
-object secret,id=sec0,filename=mypasswd.txt \
-object tls-creds-x509,passwordid=sec0,id=creds0,\
dir=/home/berrange/.pki/qemu,endpoint=server \
-vnc :1,tls-creds=creds0
This requires QEMU to be linked to GNUTLS >= 3.1.11. If
GNUTLS is too old an error will be reported if an attempt
is made to pass a decryption password.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a new QCryptoSecret object class which will be used
for providing passwords and keys to other objects which need
sensitive credentials.
The new object can provide secret values directly as properties,
or indirectly via a file. The latter includes support for file
descriptor passing syntax on UNIX platforms. Ordinarily passing
secret values directly as properties is insecure, since they
are visible in process listings, or in log files showing the
CLI args / QMP commands. It is possible to use AES-256-CBC to
encrypt the secret values though, in which case all that is
visible is the ciphertext. For ad hoc developer testing though,
it is fine to provide the secrets directly without encryption
so this is not explicitly forbidden.
The anticipated scenario is that libvirtd will create a random
master key per QEMU instance (eg /var/run/libvirt/qemu/$VMNAME.key)
and will use that key to encrypt all passwords it provides to
QEMU via '-object secret,....'. This avoids the need for libvirt
(or other mgmt apps) to worry about file descriptor passing.
It also makes life easier for people who are scripting the
management of QEMU, for whom FD passing is significantly more
complex.
Providing data inline (insecure, only for ad hoc dev testing)
$QEMU -object secret,id=sec0,data=letmein
Providing data indirectly in raw format
printf "letmein" > mypasswd.txt
$QEMU -object secret,id=sec0,file=mypasswd.txt
Providing data indirectly in base64 format
$QEMU -object secret,id=sec0,file=mykey.b64,format=base64
Providing data with encryption
$QEMU -object secret,id=master0,file=mykey.b64,format=base64 \
-object secret,id=sec0,data=[base64 ciphertext],\
keyid=master0,iv=[base64 IV],format=base64
Note that 'format' here refers to the format of the ciphertext
data. The decrypted data must always be in raw byte format.
More examples are shown in the updated docs.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds the initial plumbing for split IRQ chip mode via
KVM_CAP_SPLIT_IRQCHIP. In addition to option processing, a number of
kvm_*_in_kernel macros are defined to help clarify which component is
where.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch introduces command line options for enabling recording or replaying
virtual machine behavior. These options are added to icount command line
parameter. They include 'rr' which switches between record and replay
and 'rrfile' for specifying the filename for replay log.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162518.8676.70792.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Add a short description for the filter-dump command line options.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This filter is to buffer/release packets. Can be used when using
MicroCheckpointing or other Remus like VM FT solutions.
You can also use it to crudely simulate network delay. Doesn't
actually delay individual packets, but batches them together, which is
a delay of sorts.
Usage:
-netdev tap,id=bn0
-object filter-buffer,id=f0,netdev=bn0,queue=rx,interval=1000
NOTE:
Interval is in microseconds, it can't be omitted currently, and can't be 0.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch is initially based a patch from Nikolay Nikolaev.
This patch adds vhost-user multiple queue support, by creating a nc
and vhost_net pair for each queue.
Qemu exits if find that the backend can't support the number of requested
queues (by providing queues=# option). The max number is queried by a
new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol
feature VHOST_USER_PROTOCOL_F_MQ is present first.
The max queue check is done at vhost-user initiation stage. We initiate
one queue first, which, in the meantime, also gets the max_queues the
backend supports.
In older version, it was reported that some messages are sent more times
than necessary. Here we came an agreement with Michael that we could
categorize vhost user messages to 2 types: non-vring specific messages,
which should be sent only once, and vring specific messages, which should
be sent per queue.
Here I introduced a helper function vhost_user_one_time_request(), which
lists following messages as non-vring specific messages:
VHOST_USER_SET_OWNER
VHOST_USER_RESET_DEVICE
VHOST_USER_SET_MEM_TABLE
VHOST_USER_GET_QUEUE_NUM
For above messages, we simply ignore them when they are not sent the first
time.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Switch VNC server over to using the QCryptoTLSSession object
for the TLS session. This removes the direct use of gnutls
from the VNC server code. It also removes most knowledge
about TLS certificate handling from the VNC server code.
This has the nice effect that all the CONFIG_VNC_TLS
conditionals go away and the user gets an actual error
message when requesting TLS instead of it being silently
ignored.
With this change, the existing configuration options for
enabling TLS with -vnc are deprecated.
Old syntax for anon-DH credentials:
-vnc hostname:0,tls
New syntax:
-object tls-creds-anon,id=tls0,endpoint=server \
-vnc hostname:0,tls-creds=tls0
Old syntax for x509 credentials, no client certs:
-vnc hostname:0,tls,x509=/path/to/certs
New syntax:
-object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=no \
-vnc hostname:0,tls-creds=tls0
Old syntax for x509 credentials, requiring client certs:
-vnc hostname:0,tls,x509verify=/path/to/certs
New syntax:
-object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=yes \
-vnc hostname:0,tls-creds=tls0
This aligns VNC with the way TLS credentials are to be
configured in the future for chardev, nbd and migration
backends. It also has the benefit that the same TLS
credentials can be shared across multiple VNC server
instances, if desired.
If someone uses the deprecated syntax, it will internally
result in the creation of a 'tls-creds' object with an ID
based on the VNC server ID. This allows backwards compat
with the CLI syntax, while still deleting all the original
TLS code from the VNC server.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a QCryptoTLSCredsX509 class which is used to
manage x509 certificate TLS credentials. This will be
the preferred credential type offering strong security
characteristics
Example CLI configuration:
$QEMU -object tls-creds-x509,id=tls0,endpoint=server,\
dir=/path/to/creds/dir,verify-peer=yes
The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use
$QEMU -object tls-creds-x509,id=tls0,.... \
-vnc 127.0.0.1:1,tls-creds=tls0
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce a QCryptoTLSCredsAnon class which is used to
manage anonymous TLS credentials. Use of this class is
generally discouraged since it does not offer strong
security, but it is required for backwards compatibility
with the current VNC server implementation.
Simple example CLI configuration:
$QEMU -object tls-creds-anon,id=tls0,endpoint=server
Example using pre-created diffie-hellman parameters
$QEMU -object tls-creds-anon,id=tls0,endpoint=server,\
dir=/path/to/creds/dir
The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use
$QEMU -object tls-creds-anon,id=tls0,.... \
-vnc 127.0.0.1:1,tls-creds=tls0
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch generates smbios tables for ARM mach-virt. Also add
CONFIG_SMBIOS=y for ARM default config.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1440615870-9518-3-git-send-email-wei@redhat.com
[PMM: Added missing braces around an if().]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 830d70db69.
The interface isn't fully backwards-compatible, which is bad.
Let's redo this properly after 2.4.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
RHEL7 and others are stuck with libiscsi 1.9.0 since there
unfortunately was an ABI breakage after that release.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1435313881-19366-1-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
libiscsi starting with 1.15 will properly support timeout of iscsi
commands. The default will remain no timeout, but this can
be changed via cmdline parameters, e.g.:
qemu -iscsi timeout=30 -drive file=iscsi://...
If a timeout occurs a reconnect is scheduled and the timed out command
will be requeued for processing after a successful reconnect.
The required API call iscsi_set_timeout is present since libiscsi
1.10 which was released in October 2013. However, due to some bugs
in the libiscsi code the use is not recommended before version 1.15.
Please note that this patch bumps the libiscsi requirement to 1.10
to have all function and macros defined. The patch fixes also a
off-by-one error in the NOP timeout calculation which was fixed
while touching these code parts.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1434455107-19328-1-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add UHI semihosting support for MIPS. QEMU run with "-semihosting" option
will alter the behaviour of SDBBP 1 instruction -- UHI operation will be
called instead of generating a debug exception.
Also tweak Malta's pseudo-bootloader. On CPU reset the $4 register is set
to -1 if semihosting arguments are passed to indicate that the UHI
operations should be used to obtain input arguments.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Doesn't appear to make a difference, but let's use it consistently.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Recent commit 3751d7c "vl: allow full-blown QemuOpts syntax for
-global" overloaded its existing argument syntax DRIVER.PROP=VALUE
with QemuOpts syntax. Unambigious as long as no DRIVER contains '='.
Its documentation claims that "the two syntaxes are equivalent."
Improve it to spell out how exactly the old syntax gets desugared into
the new one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* Changes to name string ownership for alias properties
* Improvements around enum properties
* Cleanups around -object handling
* New helper functions
* Cleanups of qdev init helper functions
* Add path argument to qom-tree script
* QTest cleanup to use new qtest_add_data_func() consistently
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bIg2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* Changes to name string ownership for alias properties
* Improvements around enum properties
* Cleanups around -object handling
* New helper functions
* Cleanups of qdev init helper functions
* Add path argument to qom-tree script
* QTest cleanup to use new qtest_add_data_func() consistently
# gpg: Signature made Fri Jun 19 18:14:38 2015 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter:
qdev: Un-deprecate qdev_init_nofail()
qdev: Deprecated qdev_init() is finally unused, drop
qom: Don't pass string table to object_get_enum() function
qom: Add an object_property_add_enum() helper function
qom: Make enum string tables const-correct
qom: Add object_new_with_props() / object_new_withpropv() helpers
qom: Add helper function for getting user objects root
vl: Create (most) objects before creating chardev backends
doc: Document user creatable object types in help text
backends: Fix typename of 'policy' enum property in hostmem obj
scripts: Add support for path as argument of qom-tree
tests: Use qtest_add_data_func() consistently
qdev: Free property names after registering gpio aliases
qom: strdup() target property name on object_property_add_alias()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The QEMU help for -object is essentially useless, just giving users
the generic syntax. Move it down into its own section and introduce
a nested table where each user creatable object can be documented.
The existing memory-backend-file, rng-random and rng-egd object
types are documented.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add new "arg" sub-argument to the --semihosting-config allowing the user
to pass multiple input arguments separately. It is required for example
by UHI semihosting to construct argc and argv.
Also, update ARM semihosting to support new option (at the moment it is
the only target which cares about arguments).
If the semihosting is enabled and no semihosting args have been specified,
then fall back to -kernel/-append. The -append string is split on whitespace
before initializing semihosting.argv[1..n]; this is different from what
QEMU MIPS machines' pseudo-bootloaders do (i.e. argv[1] contains the whole
-append), but is more intuitive from UHI user's point of view and Linux
kernel just does not care as it concatenates argv[1..n] into single cmdline
string anyway.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Message-id: 1434643256-16858-3-git-send-email-leon.alrae@imgtec.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The throttle group support use a cooperative round robin scheduling
algorithm.
The principles of the algorithm are simple:
- Each BDS of the group is used as a token in a circular way.
- The active BDS computes if a wait must be done and arms the right
timer.
- If a wait must be done the token timer will be armed so the token
will become the next active BDS.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: f0082a86f3ac01c46170f7eafe2101a92e8fde39.1433779731.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some convinience fluff: Add support for '-vga virtio', also add
virtio-vga to the list of vga cards so '-device virtio-vga' will
turn off the default vga.
Written by Dave Airlie and Gerd Hoffmann.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch introduces a new diag288 watchdog device that will, just like
other watchdogs, monitor a guest and take corresponding actions when it
detects that the guest is not responding.
diag288 is s390x specific. The wiring to s390x KVM will be done in
separate patches.
Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split out qemu-option.hx base changes]
We will introduce a new watchdog for s390x. Lets adopt
qemu-options.hx to allow more watchdog devices.
Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split out qemu-option.hx base changes]
Allow user supplied files to be inserted into the fw_cfg
device before starting the guest. Since fw_cfg_add_file()
already disallows duplicate fw_cfg file names, qemu will
exit with an error message if the user supplies multiple
blobs with the same fw_cfg file name, or if a blob name
collides with a fw_cfg name programmatically added from
within the QEMU source code. A warning message will be
printed if the fw_cfg item name does not begin with the
prefix "opt/", which is recommended for external, user
provided blobs.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* CONFIG_PARALLEL fix from Mirek
* Atomic/optimized dirty bitmap access from myself and Stefan
* BUILD_DIR convenience/bugfix from Peter C
* Memory leak fix from Shannon
* SMM improvements (though still TCG only) from myself and Gerd, acked by mst
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVceAwAAoJEL/70l94x66Dyz4H/RHS/OUGo6HOwG1FZ4l8RxRl
FY+pwJqinxFyGySmMLVHEeQCsIfxgi8bOmuWblG7sdt245nhMIj2jglyEOCUA3RN
Q9qxQr6QyXBWiwK4bfB7xI1z3/mc8cVvuxjtkLaBMa16A4MXMunWCDcyhsX9/0Vw
VySgTgBbn5AyY5x58TbkB7Tl6hMZgxF0yNwU6IGQvP079dgREAL2tzR1Wk8kPC80
ltLWlrwTAzF2km5m6rmstpMeZ/XIaq3DD2LU03SyUhefMsYowGKK+7Boo4lHpVm9
XAlxflahN7VGtQuno5RpYNNSzGqSJgqu5X5JxCMnbWdPi4sX3bijQdcUhW3/0oo=
=KPIz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* KVM error improvement from Laurent
* CONFIG_PARALLEL fix from Mirek
* Atomic/optimized dirty bitmap access from myself and Stefan
* BUILD_DIR convenience/bugfix from Peter C
* Memory leak fix from Shannon
* SMM improvements (though still TCG only) from myself and Gerd, acked by mst
# gpg: Signature made Fri Jun 5 18:45:20 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (62 commits)
update Linux headers from kvm/next
atomics: add explicit compiler fence in __atomic memory barriers
ich9: implement SMI_LOCK
q35: implement TSEG
q35: add test for SMRAM.D_LCK
q35: implement SMRAM.D_LCK
q35: add config space wmask for SMRAM and ESMRAMC
q35: fix ESMRAMC default
q35: implement high SMRAM
hw/i386: remove smram_update
target-i386: use memory API to implement SMRAM
hw/i386: add a separate region that tracks the SMRAME bit
target-i386: create a separate AddressSpace for each CPU
vl: run "late" notifiers immediately
qom: add object_property_add_const_link
vl: allow full-blown QemuOpts syntax for -global
pflash_cfi01: add secure property
pflash_cfi01: change to new-style MMIO accessors
pflash_cfi01: change big-endian property to BIT type
target-i386: wake up processors that receive an SMI
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As of commit 076b35b5a (machine: add default_ram_size to machine
class) we no longer have a global default ram size, but instead
machine specific defaults. When invoking qemu --help we don't know
which machine you selected, so we can't tell the user the default RAM
size in the help text anymore now.
Thus I don't see an easy way to expose the default ram size to the
user in the help text. The easiest option IMHO is to just drop this
piece of information.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Acked-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Message-id: 1433495103-62084-1-git-send-email-agraf@suse.de
[PMM: rewrapped long commit message lines]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-global does not work for drivers that have a dot in their name, such as
cfi.pflash01. This is just a parsing limitation, because such globals
can be declared easily inside a -readconfig file.
To allow this usage, support the full QemuOpts key/value syntax for -global
too, for example "-global driver=cfi.pflash01,property=secure,value=on".
The two formats do not conflict, because the key/value syntax does not have
a period before the first equal sign.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'sleep' parameter sets the icount_sleep mode, which is enabled by
default. To disable it, add the 'sleep=no' parameter (or 'nosleep') to the
qemu -icount option.
Signed-off-by: Victor CLEMENT <victor.clement@openwide.fr>
Message-Id: <1432912446-9811-3-git-send-email-victor.clement@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The help/man text for
-incoming defer
didn't make it through the merge of the code that implemented it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Based on patch by Nikolay Nikolaev:
Vhost-user will implement the multi queue support in a similar way
to what vhost already has - a separate thread for each queue.
To enable the multi queue functionality - a new command line parameter
"queues" is introduced for the vhost-user netdev.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a preliminary framework in virt-acpi-build.c with the main
ACPI build functions. It exposes the generated ACPI contents to
guest over fw_cfg.
The required ACPI v5.1 tables for ARM are:
- RSDP: Initial table that points to XSDT
- RSDT: Points to FADT GTDT MADT tables
- FADT: Generic information about the machine
- GTDT: Generic timer description table
- MADT: Multiple APIC description table
- DSDT: Holds all information about system devices/peripherals, pointed by FADT
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1432522520-8068-5-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Looking at the output of "qemu-system-xxx -help", you easily get
the impression that "-net" is the preferred way instead of "-netdev"
to specify host network interface, since the "-net" option is
omnipresent but the "-netdev" option is only listed as a one-liner
at the end. This is ugly since "-net" is considered as legacy and
even might be removed one day. Thus, this patch switches the output
to explain the host network interfaces with the "-netdev" option
instead, moving the old "-net" option into some few lines at
the end.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1431701904-12230-1-git-send-email-thuth@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Raise your hand if you have a physical floppy drive in a computer
you've powered on in 2015. Okay, I see we got a few weirdos in the
audience. That's okay, weirdos are welcome here.
Kidding aside, media change detection doesn't fully work, isn't going
to be fixed, and floppy passthrough just isn't earning its keep
anymore.
Deprecate block driver host_floppy now, so we can drop it after a
grace period.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We now always send a JSON blob describing the migration file format as part
of the migration stream. However, some tools built around QEMU have proven
to stumble over this.
This patch gives the user the chance to disable said self-describing part of
the migration stream. To disable vmdesc submission, just add
-machine suppress-vmdesc=on
to your QEMU command line.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Check for the aes_key_wrap and dea_key_wrap machine options and set the
appropriate KVM device attribute(s) to tell the kernel to enable or disable
the AES/DEA protected key functions for the guest domain.
This patch introduces two new machine options for indicating the state of
AES/DEA key wrapping functions. This controls whether the guest will
have access to the AES/DEA crypto functions.
aes_key_wrap="on | off" is changed to aes-key-wrap="on | off"
dea_key_wrap="on | off" is changed to dea-key-wrap="on | off"
Check for the aes-key-wrap and dea-key-wrap machine options and set the
appropriate KVM device attribute(s) to tell the kernel to enable or disable
the AES/DEA protected key functions for the guest domain.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1426164834-38648-4-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add memory hotplug options to the command-line format. Also,
add a complete command-line example and improve description.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paulo Vital <paulo.vital@profitbricks.com>
Teach qemu to set up a Spice server with a UNIX socket using the
following arguments -spice unix,addr=path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* pass semihosting exit code out to system
* more TrustZone support code (still not enabled yet)
* allow user to direct semihosting to gdb or native explicitly
rather than always auto-guessing the destination
* fix memory leak in realview_init
* fix coverity warning in hw/arm/boot
* get state migration working for AArch64 CPUs
* check errors in kvm_arm_reset_vcpu
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pMcy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20141211' into staging
target-arm queue:
* pass semihosting exit code out to system
* more TrustZone support code (still not enabled yet)
* allow user to direct semihosting to gdb or native explicitly
rather than always auto-guessing the destination
* fix memory leak in realview_init
* fix coverity warning in hw/arm/boot
* get state migration working for AArch64 CPUs
* check errors in kvm_arm_reset_vcpu
# gpg: Signature made Thu 11 Dec 2014 12:16:19 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20141211: (33 commits)
target-arm: Check error conditions on kvm_arm_reset_vcpu
target-arm: Support save/load for 64 bit CPUs
target-arm/kvm: make reg sync code common between kvm32/64
arm_gic_kvm: Tell kernel about number of IRQs
hw/arm/boot: fix uninitialized scalar variable warning reported by coverity
hw/arm/realview.c: Fix memory leak in realview_init()
target-arm: make MAIR0/1 banked
target-arm: make c13 cp regs banked (FCSEIDR, ...)
target-arm: make VBAR banked
target-arm: make PAR banked
target-arm: make IFAR/DFAR banked
target-arm: make DFSR banked
target-arm: make IFSR banked
target-arm: make DACR banked
target-arm: make TTBCR banked
target-arm: make TTBR0/1 banked
target-arm: make CSSELR banked
target-arm: respect SCR.FW, SCR.AW and SCTLR.NMFI
target-arm: add SCTLR_EL3 and make SCTLR banked
target-arm: add MVBAR support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The usual semihosting behaviour is to process the system calls locally and
return; unfortuantelly the initial implementation dinamically changed the
target to GDB during debug sessions, which, for the usual arm-none-eabi-gdb,
is not implemented. The result was that during debug sessions the semihosting
calls were discarded.
This patch adds a configuration variable and an option to set it on the
command line:
-semihosting-config [enable=on|off,]target=native|gdb|auto
This option enables semihosting and defines where the semihosting calls will
be addressed, to QEMU ('native') or to GDB ('gdb'). The default is auto, which
means 'gdb' during debug sessions and 'native' otherwise.
Signed-off-by: Liviu Ionescu <ilg@livius.net>
Message-id: 1416341957-9796-1-git-send-email-ilg@livius.net
[PMM: moved declaration and definition of semihosting_target to
gdbstub.h and gdbstub.c to fix build failure on linux-user]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a command line option for adding a QMP monitor using pretty JSON
formatting.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
c/s 9b23cfb76b
or
c/s b154537ad0
moved the testing of xen_enabled() from pc_init1() to
pc_machine_initfn().
xen_enabled() does not return the correct value in
pc_machine_initfn().
Changed vmport from a bool to an enum. Added the value "auto" to do
the old way. Move check of xen_enabled() back to pc_init1().
Acked-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a pc & q35 only machine opt.
VMWare apparently doesn't like running under QEMU due to our
incomplete emulation of it's special IO Port. This adds a
pc & q35 property to allow it to be turned off.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 6d32717 "aio / timers: Remove alarm timers" has issues:
1. It silently ignores -clock for backward compatibility.
Incompatible change: -clock help no longer terminates the program.
Tolerable.
2. Failed to update option documentation. In particular, -help still
advises users to try -clock help for available timers. Drop all
documentation on -clock.
3. The 'query-alarm-clock' example in docs/writing-commands.txt no
longer works, and needs to be redone. Can't do that right now, so I
just stick in a FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds a "reconnect" option to socket backends that gives a reconnect
timeout. This only applies to client sockets. If the other end
of a socket closes the connection, qemu will attempt to reconnect
after the given number of seconds.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A bunch of bugfixes - these will make sense for 2.1.1
Initial Intel IOMMU support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUBdygAAoJECgfDbjSjVRpa9cIAJS06we0CpJaVmPrQS5HvC1w
An5Y5bGdfMQtfKjqN1Kehmtu/+wjNKZJw427+6B+KNO7wm9rRUiu927qp9lNGlbH
g3ybrknKYeyqVO/43SJt8c1eODSkmNgHPqyCkRVLbriYo850b2HhjJyMvVNZqeHD
zuTmU95GTNeiYAV8J1c59OrqUz302kCXI4A47loY7LdoEFMbJat4DbkrkspuTgbQ
EVk5sR8p2atKzgaOV6M6yiAtL5uSBNr9KmHvuA7ZBiV21wmOJm5u3y6DpLczUD90
+Ln6BCjmPS5GQ12pzY7U65enr/x/RYo6k01ig9MP3TndNA02XxCaskqfd083jM8=
=4drK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc fixes, features
A bunch of bugfixes - these will make sense for 2.1.1
Initial Intel IOMMU support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 02 Sep 2014 16:05:04 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vhost_net: start/stop guest notifiers properly
pci: avoid losing config updates to MSI/MSIX cap regs
virtio-net: don't run bh on vm stopped
ioh3420: remove unused ioh3420_init() declaration
vhost_net: cleanup start/stop condition
intel-iommu: add IOTLB using hash table
intel-iommu: add context-cache to cache context-entry
intel-iommu: add supports for queued invalidation interface
intel-iommu: fix coding style issues around in q35.c and machine.c
intel-iommu: add Intel IOMMU emulation to q35 and add a machine option "iommu" as a switch
intel-iommu: add DMAR table to ACPI tables
intel-iommu: introduce Intel IOMMU (VT-d) emulation
iommu: add is_write as a parameter to the translate function of MemoryRegionIOMMUOps
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
1. s390x/kvm: avoid synchronize_rcu's in kernel
----------------------------------------------
The first patches change s390x/kvm code to issue VCPU specific ioctls
from the VCPU thread. This will avoid unnecessary synchronize_rcu in
the kernel, which caused a noticably slowdown with many guest CPUs.
It speeds up all start/restart/reset operations involving cpus
drastically.
2. s390-ccw.img: block size and DASD format support
---------------------------------------------------
The second part changes the s390-ccw bios to IPL (boot) more disk
formats than before. Furthermore a small fix is made to the console
output of the bios.
3. s390: Support for Hotplug of Standby Memory
----------------------------------------------
The third part adds support in s390 for a pool of standby memory,
which can be set online/offline by the guest (ie, via chmem).
The standby pool of memory is allocated as the difference between
the initial memory setting and the maxmem setting.
As part of this work, additional results are provided for the
Read SCP Information SCLP, and new implentation is added for the
Read Storage Element Information, Attach Storage Element,
Assign Storage and Unassign Storage SCLPs, which enables the s390
guest to manipulate the standby memory pool.
This patchset is based on work originally done by Jeng-Fang (Nick)
Wang.
Sample qemu command snippet:
qemu -machine s390-ccw-virtio -m 1024M,maxmem=2048M,slots=32 -enable-kvm
This will allocate 1024M of active memory, and another 1024M
of standby memory. Example output from s390-tools lsmem:
=============================================================================
0x0000000000000000-0x000000000fffffff 256 online no 0-127
0x0000000010000000-0x000000001fffffff 256 online yes 128-255
0x0000000020000000-0x000000003fffffff 512 online no 256-511
0x0000000040000000-0x000000007fffffff 1024 offline - 512-1023
Memory device size : 2 MB
Memory block size : 256 MB
Total online memory : 1024 MB
Total offline memory: 1024 MB
The guest can dynamically enable part or all of the standby pool
via the s390-tools chmem, for example:
chmem -e 512M
And can attempt to dynamically disable:
chmem -d 512M
4. s390x/gdb: various fixes
---------------------------
* Patch 1 fixes a bug where the cc was changed accidentally.
* Patch 2 adds the gdb feature XML files for s390x
* Patch 3 Define acr and fpr registers as coprocessor registers. This allows us
to reuse the feature XML files.
* Patch 4 whitespace fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=bRo5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/kvm-s390-20140901' into staging
s390x/kvm: Several updates/fixes/features
1. s390x/kvm: avoid synchronize_rcu's in kernel
----------------------------------------------
The first patches change s390x/kvm code to issue VCPU specific ioctls
from the VCPU thread. This will avoid unnecessary synchronize_rcu in
the kernel, which caused a noticably slowdown with many guest CPUs.
It speeds up all start/restart/reset operations involving cpus
drastically.
2. s390-ccw.img: block size and DASD format support
---------------------------------------------------
The second part changes the s390-ccw bios to IPL (boot) more disk
formats than before. Furthermore a small fix is made to the console
output of the bios.
3. s390: Support for Hotplug of Standby Memory
----------------------------------------------
The third part adds support in s390 for a pool of standby memory,
which can be set online/offline by the guest (ie, via chmem).
The standby pool of memory is allocated as the difference between
the initial memory setting and the maxmem setting.
As part of this work, additional results are provided for the
Read SCP Information SCLP, and new implentation is added for the
Read Storage Element Information, Attach Storage Element,
Assign Storage and Unassign Storage SCLPs, which enables the s390
guest to manipulate the standby memory pool.
This patchset is based on work originally done by Jeng-Fang (Nick)
Wang.
Sample qemu command snippet:
qemu -machine s390-ccw-virtio -m 1024M,maxmem=2048M,slots=32 -enable-kvm
This will allocate 1024M of active memory, and another 1024M
of standby memory. Example output from s390-tools lsmem:
=============================================================================
0x0000000000000000-0x000000000fffffff 256 online no 0-127
0x0000000010000000-0x000000001fffffff 256 online yes 128-255
0x0000000020000000-0x000000003fffffff 512 online no 256-511
0x0000000040000000-0x000000007fffffff 1024 offline - 512-1023
Memory device size : 2 MB
Memory block size : 256 MB
Total online memory : 1024 MB
Total offline memory: 1024 MB
The guest can dynamically enable part or all of the standby pool
via the s390-tools chmem, for example:
chmem -e 512M
And can attempt to dynamically disable:
chmem -d 512M
4. s390x/gdb: various fixes
---------------------------
* Patch 1 fixes a bug where the cc was changed accidentally.
* Patch 2 adds the gdb feature XML files for s390x
* Patch 3 Define acr and fpr registers as coprocessor registers. This allows us
to reuse the feature XML files.
* Patch 4 whitespace fixes
# gpg: Signature made Mon 01 Sep 2014 12:53:39 BST using RSA key ID B5A61C7C
# gpg: Can't check signature: public key not found
* remotes/borntraeger/tags/kvm-s390-20140901:
s390x/gdb: coding style fixes
s390x/gdb: generate target.xml and handle fp/ac as coprocessors
s390x/gdb: add the feature xml files for s390x
s390x/gdb: don't touch the cc if tcg is not enabled
sclp-s390: Add memory hotplug SCLPs
s390-virtio: Apply same memory boundaries as virtio-ccw
virtio-ccw: Include standby memory when calculating storage increment
sclp-s390: Add device to manage s390 memory hotplug
pc-bios/s390-ccw.img binary update
pc-bios/s390-ccw: Do proper console setup
pc-bios/s390-ccw: IPL from DASD with format variations
pc-bios/s390-ccw Really big EAV ECKD DASD handling
pc-bios/s390-ccw Improve ECKD informational message
pc-bios/s390-ccw: handle more ECKD DASD block sizes
pc-bios/s390-ccw: support all virtio block size
s390x/kvm: execute the first cpu reset on the vcpu thread
s390x/kvm: execute "system reset" cpu resets on the vcpu thread
s390x/kvm: execute sigp orders on the target vcpu thread
s390x/kvm: run guest triggered resets on the target vcpu thread
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When determining the memory increment size, use the maxmem size if
it was specified.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In order to access VMware ESX efficiently, we need to send a session
cookie. This patch is very simple and just allows you to send that
session cookie. It punts on the question of how you get the session
cookie in the first place, but in practice you can just run a `curl'
command against the server and extract the cookie that way.
To use it, add file.cookie to the curl URL. For example:
$ qemu-img info 'json: {
"file.driver":"https",
"file.url":"https://vcenter/folder/Windows%202003/Windows%202003-flat.vmdk?dcPath=Datacenter&dsName=datastore1",
"file.sslverify":"off",
"file.cookie":"vmware_soap_session=\"52a01262-bf93-ccce-d379-8dabb3e55560\""}'
image: [...]
file format: raw
virtual size: 8.0G (8589934592 bytes)
disk size: unavailable
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The curl hardcoded timeout (5 seconds) sometimes is not long
enough depending on the remote server configuration and network
traffic. The user should be able to set how much long he is
willing to wait for the connection.
Adding a new option to set this timeout gives the user this
flexibility. The previous default timeout of 5 seconds will be
used if this option is not present.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Reviewed-by: Benoit Canet <benoit.canet@nodalink.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add Intel IOMMU emulation to q35 chipset and expose it to the guest.
1. Add a machine option. Users can use "-machine iommu=on|off" in the command
line to enable/disable Intel IOMMU. The default is off.
2. Accroding to the machine option, q35 will initialize the Intel IOMMU and
use pci_setup_iommu() to setup q35_host_dma_iommu() as the IOMMU function for
the pci bus.
3. q35_host_dma_iommu() will return different address space according to the
bus_num and devfn of the device.
Signed-off-by: Le Tan <tamlokveer@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT7j2XAAoJEJykq7OBq3PIUL4H/11PwoUewF5hXqbsaTVbxLWK
RdufFsy+31+FjM2JaGbJnGyuzRFOevx3SLllnASkltsC7AV+MlQw0qDfQ9MSvsT4
wotQKEfwApleq7u4wp/zTCyNCDRyPTvIDboG2NB/BqHMjsaar2EX3yacSZ+Bv+WJ
cj2OOK9OlHHy0fycx9POgx3RB+OSNvzPcJ2DaNMuDY/0/ss5i6r2aQOT5bgHFTNU
JCAGYB1MJ1dMBqHnfWdsBHXTliPnYoGyYGTLcE2lHO9VBj1hOw867Iemz9mNLWg5
LTWHLnYZLiUZIzGWlBrtnv4lgLsu2xtZCBuiMgDfl6zZtFhIR36SA1M8pdS2yMA=
=3PII
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Fri 15 Aug 2014 18:04:23 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (55 commits)
qcow2: fix new_blocks double-free in alloc_refcount_block()
image-fuzzer: Reduce number of generator functions in __init__
image-fuzzer: Add generators of L1/L2 tables
image-fuzzer: Add fuzzing functions for L1/L2 table entries
docs: Expand the list of supported image elements with L1/L2 tables
image-fuzzer: Public API for image-fuzzer/runner/runner.py
image-fuzzer: Generator of fuzzed qcow2 images
image-fuzzer: Fuzzing functions for qcow2 images
image-fuzzer: Tool for fuzz tests execution
docs: Specification for the image fuzzer
ide: only constrain read/write requests to drive size, not other types
virtio-blk: Correct bug in support for flexible descriptor layout
libqos: Change free function called in malloc
libqos: Correct mask to align size to PAGE_SIZE in malloc-pc
libqtest: add QTEST_LOG for debugging qtest testcases
ide: Fix segfault when flushing a device that doesn't exist
qemu-options: add missing -drive discard option to cmdline help
parallels: 2TB+ parallels images support
parallels: split check for parallels format in parallels_open
parallels: replace tabs with spaces in block/parallels.c
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change host to port.
Signed-off-by: Liming Wang <liming.wang@canonical.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The align option is used for activating the align algorithm
in order to synchronise the host clock and the guest clock.
Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr>
Tested-by: Camille Bégué <camille.begue@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make icount parameter use QemuOpts style options in order
to easily add other suboptions.
Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr>
Tested-by: Camille Bégué <camille.begue@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This transport allows to connect a QEMU nic to a static Ethernet
over L2TPv3 tunnel. The transport supports all options present
in the Linux kernel implementation. It allows QEMU to connect
to any Linux host running kernel 3.3+, most routers and network
devices as well as other QEMU instances.
[Fixed up net_client_init1() switch statement to support -netdev
--Stefan]
Signed-off-by: Anton Ivanov <antivano@cisco.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This commit adds a new command, '-dump-vmstate', that takes a filename
as an argument. When executed, QEMU will dump the vmstate information
for the machine type it's invoked with to the file, and quit.
The JSON-format output can then be used to compare the vmstate info for
different QEMU versions, specifically to test whether live migration
would break due to changes in the vmstate data.
A Python script that compares the output of such JSON dumps is included
in the following commit.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This option provides the infrastructure for binding guest NUMA nodes
to host NUMA nodes. For example:
-object memory-ram,size=1024M,policy=bind,host-nodes=0,id=ram-node0 \
-numa node,nodeid=0,cpus=0,memdev=ram-node0 \
-object memory-ram,size=1024M,policy=interleave,host-nodes=1-3,id=ram-node1 \
-numa node,nodeid=1,cpus=1,memdev=ram-node1
The option replaces "-numa node,mem=".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
MST: conflict resolution
The -numa option documentation in qemu's manpage lacks the command-line
options and some information regarding how it relates to options -m and
-smp. This commit fills in the missing text.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The supplied chardev id will be inspected for supported options. Only
a socket backend, with a set path (i.e. a Unix socket) and optionally
the server parameter set, will be allowed. Other options (nowait, telnet)
will make the chardev unusable and the netdev will not be initialised.
Additional checks for validity:
- requires `-numa node,memdev=..`
- requires `-device virtio-net-*`
The `vhostforce` option is used to force vhost-net when we deal with
non-MSIX guests.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add following parameters:
"slots" - total number of hotplug memory slots
"maxmem" - maximum possible memory
"slots" and "maxmem" should go in pair and "maxmem" should be greater
than "mem" for memory hotplug to be enabled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: fix build on 32 bit
new tests for SMBIOS
SMBIOS fixes
pc, pci fixes
qdev patches stayed on list for a month with no review,
as I told people on KVM forum I'm merging stuch patches
if they look fine.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTkJ2iAAoJECgfDbjSjVRpk4oIALf6RC/Bm3bVaX5TSgqdt8UT
4vCf10V53KkbfhxN9dGyPluswz/gyY7M/nrOoi0BSbrQndSavgyNRCfMfBfIw1FO
yvfeyrkBkKBP4ViF6uogcSr79h3vQaXsqZIGmZUsdv3ZfVrLS+7dKsigVI6PumNR
8YBveGljFjn0nrCC2+M2+LDefcPGSEu9vea9hKER0uPuz1mib8otjm1PAH30QeW/
9q1bwFEwobFJk32vrayQrwGk5ECXCCHR8LPV1Rv9tyZLEqAbdiNrwGb4MycztLvK
UHuvNFNqUHKNe/tqvp1RPmWOY2aO8+u0570kc8nhXXq2/tjJTOCmQfmodE6hh8A=
=bwmA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio,qdev fixes, tests
new tests for SMBIOS
SMBIOS fixes
pc, pci fixes
qdev patches stayed on list for a month with no review,
as I told people on KVM forum I'm merging stuch patches
if they look fine.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream:
qdev: Add test of qdev_prop_check_global
qdev: Display warning about unused -global
tests: add smbios testing
tests: rename acpi-test to bios-tables-test
virtio-balloon: return empty data when no stats are available
pcie_host: Turn pcie_host_init() into an instance_init
SMBIOS: Fix type 17 field sizes
SMBIOS: Update Type 0 struct generator for machines >= 2.1
SMBIOS: Fix endian-ness when populating multi-byte fields
serial-pci: Set prog interface field of pci config to 16550 compatible
Conflicts:
include/hw/i386/pc.h
[PMM: fixed trivial conflict in pc.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update how type 0 (bios info) structures are generated, as follows:
- convert bios_characteristics field to uin64_t (instead of
uint8_t[8]), as described in the current smbios spec (v2.8)
- enable "virtual machine" bit in bios_characteristics_extension_bits
- add command line option to enable "uefi supported" bit in
bios_characteristics_extension_bits
These updates should make this optional structure more useful when
used with edk2/ovmf. Only pc machines >= 2.1 are affected, and only
when a type 0 structure is explicitly specified on the command line.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
this patch tries to optimize zero write requests
by automatically using bdrv_write_zeroes if it is
supported by the format.
This significantly speeds up file system initialization and
should speed zero write test used to test backend storage
performance.
I ran the following 2 tests on my internal SSD with a
50G QCOW2 container and on an attached iSCSI storage.
a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX
QCOW2 [off] [on] [unmap]
-----
runtime: 14secs 1.1secs 1.1secs
filesize: 937M 18M 18M
iSCSI [off] [on] [unmap]
----
runtime: 9.3s 0.9s 0.9s
b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct
QCOW2 [off] [on] [unmap]
-----
runtime: 246secs 18secs 18secs
filesize: 51G 192K 192K
throughput: 203M/s 2.3G/s 2.3G/s
iSCSI* [off] [on] [unmap]
----
runtime: 8mins 45secs 33secs
throughput: 106M/s 1.2G/s 1.6G/s
allocated: 100% 100% 0%
* The storage was connected via an 1Gbit interface.
It seems to internally handle writing zeroes
via WRITESAME16 very fast.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adds option to -m
"size" - startup memory amount
For compatibility with legacy CLI if suffix-less number is passed,
it assumes amount in Mb.
Otherwise user is free to use suffixed number using suffixes b,k/K,M,G
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
These options are already documented on the man page but missing from
qemu --help.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
English language grammar does not allow usage
of the word "allows" directly followed by an
infinitive, declaring constructs like "something
allows to do somestuff" un-grammatical. Often
it is possible to just insert "one" between "allows"
and "to" to make the construct grammatical, but
usually it is better to re-phrase the statement.
This patch tries to fix 4 examples of "allows to"
usage in qemu doc, but does not address comments
in the code with similar constructs. It also adds
missing "the" in the same line.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A few minor tidy-ups, plus add reference to the new -vga tcx and cg3 options.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
As long as we have no persistent GTK configuration, this allows to
enable the useful grab-on-hover feature already when starting the VM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
[ kraxel: fix warning with CONFIG_GTK=n ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add flag storage to qemu-thread-* to store the namethreads flag
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
It is possible to pre-define a character device with the -chardev option
and reference its id as serial device. The man page does not mention this
feature.
Use case: Use stdio as serial, but do not terminate VM on Ctrl-C
-chardev stdio,id=mystdio,signal=off -serial chardev:mystdio
Signed-off-by: Ingo van Lil <inguin@gmx.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
# By Paolo Bonzini (4) and Peter Lieven (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
help: add id suboption to -iscsi
scsi-disk: fix WRITE SAME with large non-zero payload
block/iscsi: introduce bdrv_co_{readv, writev, flush_to_disk}
scsi-disk: fix VERIFY emulation
scsi-bus: fix transfer length and direction for VERIFY command
Message-id: 1386594157-17535-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This patch adds support for a network backend based on netmap.
netmap is a framework for high speed packet I/O. You can use it
to build extremely fast traffic generators, monitors, software
switches or network middleboxes. Its companion software switch
VALE lets you interconnect virtual machines.
netmap and VALE are implemented as a non-intrusive kernel module,
support NICs from multiple vendors, are part of standard FreeBSD
distributions and available in source format for Linux too.
To compile QEMU with netmap support, use the following configure
options:
./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys
where "/path/to/netmap" contains the netmap source code, available at
http://info.iet.unipi.it/~luigi/netmap/
The same webpage contains more information about the netmap project
(together with papers and presentations).
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The install directory of qemu-bridge-helper is configurable,
but we use a fixed path in the documentation.
DEFAULT_BRIDGE_HELPER macro isn't available in texi mode,
we should always use "/path/to/" prefix for dynamic paths
(e.g.: /path/to/image, /path/to/linux, etc).
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This feature can be used in case where users are avoiding the iops limit by
doing jumbo I/Os hammering the storage backend.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The max parameter of the leaky bucket throttling algorithm can be used to
allow the guest to do bursts.
The max value is a pool of I/O that the guest can use without being throttled
at all. Throttling is triggered once this pool is empty.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This reverts commit 6a85e60cb9.
Commit 51767e7 "qemu-char: Add new char backend CirMemCharDriver"
introduced a memory ring buffer character device driver named
"memory". Commit 3949e59 "qemu-char: Saner naming of memchar stuff &
doc fixes" changed the driver name to "ringbuf", along with a whole
bunch of other names, with the following rationale:
Naming is a mess. The code calls the device driver
CirMemCharDriver, the public API calls it "memory", "memchardev",
or "memchar", and the special commands are named like
"memchar-FOO". "memory" is a particularly unfortunate choice,
because there's another character device driver called
MemoryDriver. Moreover, the device's distinctive property is that
it's a ring buffer, not that's in memory.
This is what we released in 1.4.0.
Unfortunately, the rename missed a critical instance of "memory": the
actual driver name. Thus, the new device could be used only by an
entirely undocumented name. The documented name did not work.
Bummer.
Commit 6a85e60 fixes this by changing the documentation to match the
code. It also changes some, but not all related occurences of
"ringbuf" to "memory". Left alone are identifiers in C code, HMP and
QMP commands. The latter are external interface, so they can't be
changed.
The result is an inconsistent mess. Moreover, "memory" is a rotten
name. The device's distinctive property is that it's a ring buffer,
not that's in memory. User's don't care whether it's in RAM, flash,
or carved into chocolate tablets by Oompa Loompas.
Revert the commit. Next commit will fix just the bug.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1374849874-25531-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Otherwise, a new user will be wondering how to switch between the
console and monitor.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
[Issue]
When we offer a customer support service and a problem happens
in a customer's system, we try to understand the problem by
comparing what the customer reports with message logs of the
customer's system.
In this case, we often need to know when the problem happens.
But, currently, there is no timestamp in qemu's error messages.
Therefore, we may not be able to understand the problem based on
error messages.
[Solution]
Add a timestamp to qemu's error message logged by
error_report() with g_time_val_to_iso8601().
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
With mon:stdio you can exit the VM by switching to the monitor and
sending the "quit" command. It is then useful to pass Ctrl-C to the
VM instead of exiting.
This in turn lets us stop tying the default signal handling behavior
to -nographic, removing gratuitous differences between "-display none"
and "-nographic".
This patch changes behavior for "-display none -serial mon:stdio", as
expected, but not for "-display none -serial stdio".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1372868986-25988-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This also introduces a new suboption, "cpus=",
which is the default. So after this patch,
-smp n,sockets=y
is the same as
-smp cpus=n,sockets=y
(with "cpu" being some generic thing, referring to
either cores, or threads, or sockets, as before).
We still don't validate relations between different
numbers, for example it is still possible to say
-smp 1,sockets=10
and it will be accepted to mean sockets=1.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-id: 1372072012-30305-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is the (implied sub)option name which is optional, not
the value of that (sub)option, make it so in the help output.
(Introduced by commit 22a0e04b9b)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Manual page and qemu-doc on talk about "Bochs BIOS". We use SeaBIOS,
and it implements the feature. Replace by just "BIOS", and drop the
TODO line wondering about the Bochs reference.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now we have memory char device, but the backend name of it
is a little confusion. We actually register it by 'memory', but
the description in qemu-option, the name of open functions
and the new api backend called it 'ringbuf'. It should keep
consistent. This patch named it all to 'memory'.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1369132079-11377-2-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Added TLS support to the VNC QEMU Websockets implementation.
VNC-TLS needs to be enabled for this feature to be used.
The required certificates are specified as in case of VNC-TLS
with the VNC parameter "x509=<path>".
If the server certificate isn't signed by a rooth authority it needs to
be manually imported in the browser because at least in case of Firefox
and Chrome there is no user dialog, the connection just gets canceled.
As a side note VEncrypt over Websocket doesn't work atm because TLS can't
be stacked in the current implementation. (It also didn't work before)
Nevertheless to my knowledge there is no HTML 5 VNC client which supports
it and the Websocket connection can be encrypted with regular TLS now so
it should be fine for most use cases.
Signed-off-by: Tim Hardeck <thardeck@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366727581-5772-1-git-send-email-thardeck@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In certain scenario, latency induced by paging is significant and
memory locking is needed. Also, in the scenario with untrusted
guests, latency improvement due to mlock is desired.
This patch introduces a following new option to mlock guest and
qemu memory:
-realtime mlock=on|off
Signed-off-by: Satoru Moriya <satoru.moriya@hds.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366382526-26146-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu-system-x86_64 -drive file=ssh://hostname/some/image
QEMU will ssh into 'hostname' and open '/some/image' which is made
available as a standard block device.
You can specify a username (ssh://user@host/...) and/or a port number
(ssh://host:port/...). You can also use an alternate syntax using
properties (file.user, file.host, file.port, file.path).
Current limitations:
- Authentication must be done without passwords or passphrases, using
ssh-agent. Other authentication methods are not supported.
- Uses a single connection, instead of concurrent AIO with multiple
SSH connections.
This is implemented using libssh2 on the client side. The server just
requires a regular ssh daemon with sftp-server support. Most ssh
daemons on Unix/Linux systems will work out of the box.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fix various typos and misspellings. The bulk of these were found with
codespell.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Seabios already added a new device type to halt booting.
Qemu can add "HALT" at the end of bootindex string, then
seabios will halt booting after trying to boot from all
selected devices.
This patch added a new boot option to configure if boot
from un-selected devices.
This option only effects when boot priority is changed by
bootindex options, the old style(-boot order=..) will still
try to boot from un-selected devices.
v2: add HALT entry in get_boot_devices_list()
v3: rebase to latest qemu upstream
Signed-off-by: Amos Kong <akong@redhat.com>
Message-id: 1363674207-31496-1-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support for cancelling an executing TPM command.
In Linux for example a user can cancel a command through the TPM's
sysfs 'cancel' entry using
echo "1" > /sysfs/class/misc/tpm0/device/cancel
This patch propagates the cancellation of a command inside a VM
to the host TPM's sysfs entry.
It also uses the possibility to cancel the command before QEMU VM
shutdown or reboot, which helps in preventing QEMU from hanging while
waiting for the completion of the command.
To relieve higher layers or users from having to determine the TPM's
cancel sysfs entry, the driver searches for the entry in well known
locations.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-7-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch is based of off version 9 of Stefan Berger's patch series
"QEMU Trusted Platform Module (TPM) integration"
and adds a new backend driver for it.
This patch adds a passthrough backend driver for passing commands sent to the
emulated TPM device directly to a TPM device opened on the host machine.
Thus it is possible to use a hardware TPM device in a system running on QEMU,
providing the ability to access a TPM in a special state (e.g. after a Trusted
Boot).
This functionality is being used in the acTvSM Trusted Virtualization Platform
which is available on [1].
Usage example:
qemu-system-x86_64 -tpmdev passthrough,id=tpm0,path=/dev/tpm0 \
-device tpm-tis,tpmdev=tpm0 \
-cdrom test.iso -boot d
Some notes about the host TPM:
The TPM needs to be enabled and activated. If that's not the case one
has to go through the BIOS/UEFI and enable and activate that TPM for TPM
commands to work as expected.
It may be necessary to boot the kernel using tpm_tis.force=1 in the boot
command line or 'modprobe tpm_tis force=1' in case of using it as a module.
Regards,
Andreas Niederl, Stefan Berger
[1] http://trustedjava.sourceforge.net/
Signed-off-by: Andreas Niederl <andreas.niederl@iaik.tugraz.at>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-6-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support for TPM command line options.
The command line options supported here are
./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id>
-device tpm-tis,tpmdev=<id>,id=<other id>
and
./qemu-... -tpmdev help
where the latter works similar to -soundhw help and shows a list of
available TPM backends (for example 'passthrough').
Using the type parameter, the backend is chosen, i.e., 'passthrough' for the
passthrough driver. The interpretation of the other parameters along
with determining whether enough parameters were provided is pushed into
the backend driver, which needs to implement the interface function
'create' and return a TPMDriverOpts structure if the VM can be started or
'NULL' if not enough or bad parameters were provided.
Monitor support for 'info tpm' has been added. It for example prints the
following:
(qemu) info tpm
TPM devices:
tpm0: model=tpm-tis
\ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix LP#1151450 the wrong description in qemu manual:
'qemu-system-x86_84' should be 'qemu-system-x86_64'.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By MORITA Kazutaka (5) and others
# Via Stefan Hajnoczi
* stefanha/block:
block: for HMP commit() operations on 'all', skip non-COW drives
sheepdog: add support for connecting to unix domain socket
sheepdog: use inet_connect to simplify connect code
sheepdog: accept URIs
move socket_set_nodelay to osdep.c
slirp/tcp_subr.c: fix coding style in tcp_connect
dataplane: remove EventPoll in favor of AioContext
virtio-blk: fix unplug + virsh reboot
ide/macio: Fix macio DMA initialisation.
This patch adds support for a unix domain socket for a connection
between qemu and local sheepdog server. You can use the unix domain
socket with the following syntax:
$ qemu sheepdog+unix:///<vdiname>?socket=<socket path>[#snapid]
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The URI syntax is consistent with the NBD and Gluster syntax. The
syntax is
sheepdog[+tcp]://[host:port]/vdiname[#snapid|#tag]
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Switch the default for qemu_log logging output from "/tmp/qemu.log"
to stderr. This is an incompatible change in some sense, but logging
is mostly used for debugging purposes so it shouldn't affect production
use. The previous behaviour can be obtained by adding "-D /tmp/qemu.log"
to the command line.
This change requires us to:
* update all the documentation/help text (we take the opportunity
to smooth out minor inconsistencies between the phrasing in
linux-user/bsd-user/system help messages)
* make linux-user and bsd-user defer to qemu-log for the default
logging destination rather than overriding it themselves
* ensure that all logfile closing is done via qemu_log_close()
and that that function doesn't close stderr
as well as the obvious change to the behaviour of do_qemu_set_log()
when no logfile name has been specified.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1361901160-28729-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add support for BDRV_O_UNMAP from the QEMU command-line.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1361354641-51969-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Collect them from "Standard options", "File system options", "Virtual
File system pass-through options", "Debug/Expert options".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-8-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
--device is under heading "USB options". --name and --uuid are under
"Virtual File system pass-through options". Move all three to
"Standard options".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-6-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
End tables before headings, start new ones afterwards. Fixes
incorrect indentation of headings "File system options" and "Virtual
File system pass-through options" in manual page and qemu-doc.
Normalize markup some to increase chances it survives future edits.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
New device, has never been released, so we can still improve things
without worrying about compatibility.
Naming is a mess. The code calls the device driver CirMemCharDriver,
the public API calls it "memory", "memchardev", or "memchar", and the
special commands are named like "memchar-FOO". "memory" is a
particularly unfortunate choice, because there's another character
device driver called MemoryDriver. Moreover, the device's distinctive
property is that it's a ring buffer, not that's in memory. Therefore:
* Rename CirMemCharDriver to RingBufCharDriver, and call the thing a
"ringbuf" in the API.
* Rename QMP and HMP commands from memchar-FOO to ringbuf-FOO.
* Rename device parameter from maxcapacity to size (simple words are
good for you).
* Clearly mark the parameter as optional in documentation.
* Fix error reporting so that chardev-add reports to current monitor,
not stderr.
* Replace cirmem in C identifiers by ringbuf.
* Rework documentation. Document the impact of our crappy UTF-8
handling on reading.
* QMP examples that even work.
I could split this up into multiple commits, but they'd change the
same documentation lines multiple times. Not worth it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds basic Websocket Protocol version 13 - RFC 6455 - support
to QEMU VNC. Binary encoding support on the client side is mandatory.
Because of the GnuTLS requirement the Websockets implementation is
optional (--enable-vnc-ws).
To activate Websocket support the VNC option "websocket"is used, for
example "-vnc :0,websocket".
The listen port for Websocket connections is (5700 + display) so if
QEMU VNC is started with :0 the Websocket port would be 5700.
As an alternative the Websocket port could be manually specified by
using ",websocket=<port>" instead.
Parts of the implementation base on Anthony Liguori's QEMU Websocket
patch from 2010 and on Joel Martin's LibVNC Websocket implementation.
Signed-off-by: Tim Hardeck <thardeck@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Similar to file, except that no separate in/out files are supported
because it's pointless for direct device access. Also the special
tty ioctl hooks (pass through linespeed settings etc) are activated
on Unix.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new spice chardev to allow arbitrary communication between the
host and the Spice client via the spice server.
Examples:
This allows the Spice client to have a special port for the qemu
monitor:
... -chardev spiceport,name=org.qemu.monitor,id=monitorport
-mon chardev=monitorport
v2:
- remove support for chardev to chardev linking
- conditionnaly compile with SPICE_SERVER_VERSION
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There's no need to add a space at the end of line.
Moreover, it can make problems in some projects that
store the help output into a file (and run couple of
tests based on that) and have space at EOL forbidden.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Somehow we forgot to update this when cache=writeback became the
default. While changing the information on the default, also make the
description of all caches modes a bit more accurate.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
The options no-kvm, no-kvm-pit, no-kvm-pit-reinjection, and no-kvm-irqchip
should be marked as having no argument.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* kiszka/queues/slirp:
slirp: Add domain-search option to slirp's DHCP server
slirp: Don't crash on packets from 0.0.0.0/8.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
