ARM_SBCON_I2C() macro and ArmSbconI2CState typedef are
already declared via the QOM DECLARE_INSTANCE_CHECKER()
macro in "hw/i2c/arm_sbcon_i2c.h". Drop the VERSATILE_I2C
declarations from versatile_i2c.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230110082508.24038-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230110082508.24038-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to rename TYPE_VERSATILE_I2C as TYPE_ARM_SBCON_I2C
(the formal ARM naming), start renaming its state.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230110082508.24038-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230110082508.24038-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define TYPE_GPIO_I2C in the public "hw/i2c/bitbang_i2c.h"
header and use it in hw/arm/musicpal.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20230111085016.44551-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
BASEPRI, FAULTMASK, and their _NS equivalents only exist on devices with
the Main Extension. However, the MRS instruction did not check this,
and the MSR instruction handled it inconsistently (warning BASEPRI, but
silently ignoring writes to BASEPRI_NS). Unify this behavior and always
warn when reading or writing any of these registers if the extension is
not present.
Signed-off-by: David Reiss <dreiss@meta.com>
Message-id: 167330628518.10497.13100425787268927786-0@git.sr.ht
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a 64-bit register on AArch64, even if the high 44 bits
are RES0. Because this is defined as ARM_CP_STATE_BOTH, we are
asserting that the cpreg field is 64-bits.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1400
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230115171633.3171890-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* riscv_htif: Support console output via proxy syscall
* Cleanup firmware and device tree loading
* Fix elen check when using vector extensions
* add RISC-V OpenSBI boot test
* Ensure we always follow MISA parsing
* Fix up masking of vsip/vsie accesses
* Trap on writes to stimecmp from VS when hvictl.VTI=1
* Introduce helper_set_rounding_mode_chkfrm
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmPKRP0ACgkQIeENKd+X
cFTHTwgAkyRDxrLepvI0KNaT0+cUBh+3QFlJ5JRtVnDW+5R+3aGT72PTS7Migqoh
H3IFCB2mcSdQvyjj2jDFlrFd0oVIaqE0+bnhouS/4nHB5S/vmapHi4Mc74Vv1CMB
rgXScL+C5gDOH1I7XjqOb1FY5Vxqyhi3IzdIoj+0ysUrGmUkqx+ij/cfQL7jkH9Q
slNAkorgwgrTgMgkJ5RKd4cjyv35O4XKLAsgixVTfJ+WcxKmc/zaJOkNM/UDnmxK
k2+2P8bshZWtWscXbm3oMC5+2ow1QtFedEkhHqb4adkQIyolKL7P1TfMlCgMSvES
BKl0DUhqQ+7F77tik3GPy9spQ6LpTQ==
=ifFF
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230120' of https://github.com/alistair23/qemu into staging
Second RISC-V PR for QEMU 8.0
* riscv_htif: Support console output via proxy syscall
* Cleanup firmware and device tree loading
* Fix elen check when using vector extensions
* add RISC-V OpenSBI boot test
* Ensure we always follow MISA parsing
* Fix up masking of vsip/vsie accesses
* Trap on writes to stimecmp from VS when hvictl.VTI=1
* Introduce helper_set_rounding_mode_chkfrm
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmPKRP0ACgkQIeENKd+X
# cFTHTwgAkyRDxrLepvI0KNaT0+cUBh+3QFlJ5JRtVnDW+5R+3aGT72PTS7Migqoh
# H3IFCB2mcSdQvyjj2jDFlrFd0oVIaqE0+bnhouS/4nHB5S/vmapHi4Mc74Vv1CMB
# rgXScL+C5gDOH1I7XjqOb1FY5Vxqyhi3IzdIoj+0ysUrGmUkqx+ij/cfQL7jkH9Q
# slNAkorgwgrTgMgkJ5RKd4cjyv35O4XKLAsgixVTfJ+WcxKmc/zaJOkNM/UDnmxK
# k2+2P8bshZWtWscXbm3oMC5+2ow1QtFedEkhHqb4adkQIyolKL7P1TfMlCgMSvES
# BKl0DUhqQ+7F77tik3GPy9spQ6LpTQ==
# =ifFF
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 20 Jan 2023 07:38:37 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-20230120' of https://github.com/alistair23/qemu: (37 commits)
hw/riscv/virt.c: move create_fw_cfg() back to virt_machine_init()
target/riscv: Remove helper_set_rod_rounding_mode
target/riscv: Introduce helper_set_rounding_mode_chkfrm
tcg/riscv: Use tcg_pcrel_diff in tcg_out_ldst
target/riscv: Trap on writes to stimecmp from VS when hvictl.VTI=1
target/riscv: Fix up masking of vsip/vsie accesses
hw/riscv: use ms->fdt in riscv_socket_fdt_write_distance_matrix()
hw/riscv: use MachineState::fdt in riscv_socket_fdt_write_id()
hw/riscv/virt.c: remove 'is_32_bit' param from create_fdt_socket_cpus()
hw/riscv/sifive_u.c: simplify create_fdt()
hw/riscv/virt.c: simplify create_fdt()
hw/riscv/spike.c: simplify create_fdt()
target/riscv: Use TARGET_FMT_lx for env->mhartid
target/riscv/cpu.c: do not skip misa logic in riscv_cpu_realize()
target/riscv/cpu: set cpu->cfg in register_cpu_props()
hw/riscv/boot.c: use MachineState in riscv_load_kernel()
hw/riscv/boot.c: use MachineState in riscv_load_initrd()
hw/riscv: write bootargs 'chosen' FDT after riscv_load_kernel()
hw/riscv: write initrd 'chosen' FDT inside riscv_load_initrd()
hw/riscv/spike.c: load initrd right after riscv_load_kernel()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PnvChip is typedef'ed in five places, and PnvPhb4PecState in two.
Keep one, drop the others.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221222104628.659681-5-armbru@redhat.com>
The next commit needs to include hw/ppc/pnv.h from
hw/pci-host/pnv_phb.h. Avoid an inclusion loop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221222104628.659681-4-armbru@redhat.com>
A few headers neglect to include headers they need. They compile only
if something else includes the required header(s) first. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221222104628.659681-3-armbru@redhat.com>
PnvChipClass, PnvChip, Pnv8Chip, Pnv9Chip, and Pnv10Chip are defined
in pnv.h. Many users of the header don't actually need them. One
instance is this inclusion loop: hw/ppc/pnv_homer.h includes
hw/ppc/pnv.h for typedef PnvChip, and vice versa for struct PnvHomer.
Similar structs live in their own headers: PnvHomerClass and PnvHomer
in pnv_homer.h, PnvLpcClass and PnvLpcController in pci_lpc.h,
PnvPsiClass, PnvPsi, Pnv8Psi, Pnv9Psi, Pnv10Psi in pnv_psi.h, ...
Move PnvChipClass, PnvChip, Pnv8Chip, Pnv9Chip, and Pnv10Chip to new
pnv_chip.h, and adjust include directives. This breaks the inclusion
loop mentioned above.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221222104628.659681-2-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221221133551.3967339-3-armbru@redhat.com>
We have two inclusion loops:
block/block.h
-> block/block-global-state.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
block/block.h
-> block/block-io.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
I believe these go back to Emanuele's reorganization of the block API,
merged a few months ago in commit d7e2fe4aac.
Fortunately, breaking them is merely a matter of deleting unnecessary
includes from headers, and adding them back in places where they are
now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221221133551.3967339-2-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221221131435.3851212-6-armbru@redhat.com>
qemu/coroutine.h and qemu/lockable.h include each other.
They need each other only in macro expansions, so we could simply drop
both inclusions to break the loop, and add suitable includes to files
that expand the macros.
Instead, move a part of qemu/coroutine.h to new qemu/coroutine-core.h
so that qemu/coroutine-core.h doesn't need qemu/lockable.h, and
qemu/lockable.h only needs qemu/coroutine-core.h. Result:
qemu/coroutine.h includes qemu/lockable.h includes
qemu/coroutine-core.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221221131435.3851212-5-armbru@redhat.com>
[Semantic rebase conflict with 7c10cb38cc "accel/tcg: Add debuginfo
support" resolved]
Commit 1c20d3ff60 ("hw/riscv: virt: Add a machine done notifier")
moved the initialization of fw_cfg to the virt_machine_done() callback.
Problem is that the validation of fw_cfg by devices such as ramfb is
done before the machine done notifier is called. Moving create_fw_cfg()
to machine_done() results in QEMU failing to boot when using a ramfb
device:
./qemu-system-riscv64 -machine virt -device ramfb -serial stdio
qemu-system-riscv64: -device ramfb: ramfb device requires fw_cfg with DMA
The fix is simple: move create_fw_cfg() config back to
virt_machine_init(). This happens to be the same way the ARM 'virt'
machine deals with fw_cfg (see machvirt_init() and virt_machine_done()
in hw/arm/virt.c), so we're keeping consistency with how other machines
handle this device.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1343
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230117132751.229738-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The only setting of RISCV_FRM_ROD is from the vector unit,
and now handled by helper_set_rounding_mode_chkfrm.
This helper is now unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230115160657.3169274-3-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The new helper always validates the contents of FRM, even
if the new rounding mode is not DYN. This is required by
the vector unit.
Track whether we've validated FRM separately from whether
we've updated fp_status with a given rounding mode, so that
we can elide calls correctly.
This partially reverts d6c4d3f2a6 which attempted the to do
the same thing, but with two calls to gen_set_rm(), which is
both inefficient and tickles an assertion in decode_save_opc.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1441
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230115160657.3169274-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We failed to update this with the w^x split, so misses the fact
that true pc-relative offsets are usually small.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230117230415.354239-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Per the AIA specification, writes to stimecmp from VS level should
trap when hvictl.VTI is set since the write may cause vsip.STIP to
become unset.
Fixes: 3ec0fe18a3 ("target/riscv: Add vstimecmp support")
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221215224541.1423431-2-abrestic@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current logic attempts to shift the VS-level bits into their correct
position in mip while leaving the remaining bits in-tact. This is both
pointless and likely incorrect since one would expect that any new, future
VS-level interrupts will get their own position in mip rather than sharing
with their (H)S-level equivalent. Fix this, and make the logic more
readable, by just making off the VS-level bits and shifting them into
position.
This also fixes reads of vsip, which would only ever report vsip.VSSIP
since the non-writable bits got masked off as well.
Fixes: d028ac7512 ("arget/riscv: Implement AIA CSRs for 64 local interrupts on RV32")
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221215224541.1423431-1-abrestic@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There's no need to use a MachineState pointer and a fdt pointer now that
all RISC-V machines are using the FDT from the MachineState.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There's no need to use a MachineState pointer and a fdt pointer now that
all RISC-V machines are using the FDT from the MachineState.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
create_fdt_socket_cpus() writes a different 'mmu-type' value if we're
running in 32 or 64 bits. However, the flag is being calculated during
virt_machine_init(), and is passed around in create_fdt(), then
create_fdt_socket(), and then finally create_fdt_socket_cpus(). None of
the intermediate functions are using the flag, which is a bit
misleading.
Remove 'is_32_bit' flag from create_fdt_socket_cpus() and calculate it
using the already available RISCVVirtState pointer. This will also
change the signature of create_fdt_socket() and create_fdt(), making it
clear that these functions don't do anything special when we're running
in 32 bit mode.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'cmdline' isn't being used. Remove it.
A MachineState pointer is being retrieved via a MACHINE() macro calling
qdev_get_machine(). Use MACHINE(s) instead to avoid calling qdev().
'mem_size' is being set as machine->ram_size by the caller. Retrieve it
via ms->ram_size.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'mem_size' and 'cmdline' aren't being used. Remove them.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'mem_size' and 'cmdline' are unused.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
env->mhartid is currently casted to long before printed, which drops
the high 32-bit for rv64 on 32-bit host. Use TARGET_FMT_lx instead.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230109152655.340114-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All RISCV CPUs are setting cpu->cfg during their cpu_init() functions,
meaning that there's no reason to skip all the misa validation and setup
if misa_ext was set beforehand - especially since we're setting an
updated value in set_misa() in the end.
Put this code chunk into a new riscv_cpu_validate_set_extensions()
helper and always execute it regardless of what the board set in
env->misa_ext.
This will put more responsibility in how each board is going to init
their attributes and extensions if they're not using the defaults.
It'll also allow realize() to do its job looking only at the extensions
enabled per se, not corner cases that some CPUs might have, and we won't
have to change multiple code paths to fix or change how extensions work.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230113175230.473975-3-dbarboza@ventanamicro.com>
[ Changes by AF:
- Rebase
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There is an informal contract between the cpu_init() functions and
riscv_cpu_realize(): if cpu->env.misa_ext is zero, assume that the
default settings were loaded via register_cpu_props() and do validations
to set env.misa_ext. If it's not zero, skip this whole process and
assume that the board somehow did everything.
At this moment, all SiFive CPUs are setting a non-zero misa_ext during
their cpu_init() and skipping a good chunk of riscv_cpu_realize(). This
causes problems when the code being skipped in riscv_cpu_realize()
contains fixes or assumptions that affects all CPUs, meaning that SiFive
CPUs are missing out.
To allow this code to not be skipped anymore, all the cpu->cfg.ext_*
attributes needs to be set during cpu_init() time. At this moment this
is being done in register_cpu_props(). The SiFive boards are setting
their own extensions during cpu_init() though, meaning that they don't
want all the defaults from register_cpu_props().
Let's move the contract between *_cpu_init() and riscv_cpu_realize() to
register_cpu_props(). Inside this function we'll check if
cpu->env.misa_ext was set and, if that's the case, set all relevant
cpu->cfg.ext_* attributes, and only that. Leave the 'misa_ext' = 0 case
as is today, i.e. loading all the defaults from riscv_cpu_extensions[].
register_cpu_props() can then be called by all the cpu_init() functions,
including the SiFive ones. This will make all CPUs behave more in line
with what riscv_cpu_realize() expects.
This will also make the cpu_init() functions even more alike, but at this
moment we would need some design changes in how we're initializing
extensions/attributes (e.g. some CPUs are setting cfg options after
register_cpu_props(), so we can't simply add the function to a common
post_init() hook) to make a common cpu_init() code across all CPUs.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230113175230.473975-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All callers are using kernel_filename as machine->kernel_filename.
This will also simplify the changes in riscv_load_kernel() that we're
going to do next.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'filename', 'mem_size' and 'fdt' from riscv_load_initrd() can all be
retrieved by the MachineState object for all callers.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The sifive_u, spike and virt machines are writing the 'bootargs' FDT
node during their respective create_fdt().
Given that bootargs is written only when '-append' is used, and this
option is only allowed with the '-kernel' option, which in turn is
already being check before executing riscv_load_kernel(), write
'bootargs' in the same code path as riscv_load_kernel().
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_load_initrd() returns the initrd end addr while also writing a
'start' var to mark the addr start. These informations are being used
just to write the initrd FDT node. Every existing caller of
riscv_load_initrd() is writing the FDT in the same manner.
We can simplify things by writing the FDT inside riscv_load_initrd(),
sparing callers from having to manage start/end addrs to write the FDT
themselves.
An 'if (fdt)' check is already inserted at the end of the function
because we'll end up using it later on with other boards that doesn´t
have a FDT.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This will make the code more in line with what the other boards are
doing. We'll also avoid an extra check to machine->kernel_filename since
we already checked that before executing riscv_load_kernel().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230102115241.25733-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_load_firmware(), riscv_load_initrd() and riscv_load_kernel() works
under the assumption that a 'filename' parameter is always not NULL.
This is currently the case since all callers of these functions are
checking for NULL before calling them. Add an g_assert() to make sure
that a NULL value in these cases are to be considered a bug.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
