Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
All Meson executables should specify their dependencies explicitly, either
directly or indirectly via declare_dependency. Makefiles instead did
not propagate dependencies correctly from static libraries, for example.
Therefore, flags for dependencies need not be included in QEMU_CFLAGS.
LIBS is not used at all, so drop that one as well.
In a few cases the dependencies were not yet specified, so add them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nikola reported on Windows when gd_vc_gfx_init() is called, the
window is not yet realized, so we run gd_refresh_rate_millihz(NULL)
which returns 0 milli-Hertz.
When a Widget is realized, it fires a 'realized' event. We already
have the gd_draw_event() handler registered for this even, so simply
move the gd_refresh_rate_millihz() there. When the event fires, the
window is known to exist.
This completes commit c4c00922cc original intention.
Reported-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Tested-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200817172331.598255-1-philmd@redhat.com
Suggested-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Tested-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for SIDE and EXTRA buttons.
The constants for buttons in both SPICE and QEMU are defined as
LEFT
MIDDLE
RIGHT
UP
DOWN
SIDE
EXTRA
(same order).
"button_mask" contains for each bit the state of a button. Qemu currently
uses bits 0, 1, 2 respectively as LEFT, RIGHT, MIDDLE; also add bits 4
and 5 as UP and DOWN (using wheel movements). SPICE protocol uses
a bitmask based on the order above where LEFT is bit 0, MIDDLE is
bit 1 and so on till EXTRA being bit 6. To avoid clash with Qemu usage
SPICE bitmask from SIDE are move a bit more resulting respectively
in 0x40 and 0x80 values.
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Message-id: 20200820145851.50846-1-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Receiving error in local variable err, and forgot to free it.
This patch check the return value of 'gdk_window_create_gl_context'
and 'gdk_gl_context_realize', then free err to fix it.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200831134315.1221-6-pannengyuan@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pixman used to be included directly in QEMU_CFLAGS and therefore the
include path was added to every compiler invocation. Now that (just
like basically everything else) it is a separate dependency, we
need to add it to all build target, especially UI modules that need
it due to their including ui/console.h.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the superfluous break, as there is a "return" before.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>a
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1594631086-36509-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Prevously CONFIG_VTE was not required to build QEMU with GTK UI support as not
all platforms have VTE available (in particular Windows).
Remove this requirement from the meson build system to enable QEMU to be built
with GTK UI support for Windows once again.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When pixman is not installed (or too old), but virglrenderer is available
and "configure" has been run with "--disable-system", the build currently
aborts when trying to compile vhost-user-gpu (since it requires pixman).
Let's skip the build of vhost-user-gpu when pixman is not installed or
too old. Instead of adding CONFIG_PIXMAN, it is simpler to move the
detection to pixman.
Based on a patch by Thomas Huth. <thuth@redhat.com>
Fixes: 9b52b17ba5 ("configure: Allow to build tools without pixman")
Reported-by: Rafael Kitover <rkitover@gmail.com>
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Note that sl and sv keymaps were not created by qemu-keymap.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.
Alternatively you can use a fine-grained dependency, e.g.
target/arm/translate.o: target/arm/decode-neon-shared.inc.c
With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.
The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.
Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files. The editorconfig
file is adjusted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case the string doesn't fit into the buffer snprintf returns the size
it would need, so len can be larger than the buffer. Fix this by simply
using g_strdup_printf() instead of a static buffer.
Reported-by: Wenxiang Qian <leonwxqian@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200701181801.27935-1-kraxel@redhat.com
GCC supports "#pragma GCC diagnostic" since version 4.6, and
Clang seems to support it, too, since its early versions 3.x.
That means that our minimum required compiler versions all support
this pragma already and we can remove the test from configure and
all the related #ifdefs in the code.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200710045515.25986-1-thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
move the vcpu throttling functionality into its own module.
This functionality is not specific to any accelerator,
and it is used currently by migration to slow down guests to try to
have migrations converge, and by the cocoa MacOS UI to throttle speed.
cpu-throttle contains the controls to adjust and inspect throttle
settings, start (set) and stop vcpu throttling, and the throttling
function itself that is run periodically on vcpus to make them take a nap.
Execution of the throttling function on all vcpus is triggered by a timer,
registered at module initialization.
No functionality change.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200629093504.3228-3-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The object_property_set_FOO() setters take property name and value in
an unusual order:
void object_property_set_FOO(Object *obj, FOO_TYPE value,
const char *name, Error **errp)
Having to pass value before name feels grating. Swap them.
Same for object_property_set(), object_property_get(), and
object_property_parse().
Convert callers with this Coccinelle script:
@@
identifier fun = {
object_property_get, object_property_parse, object_property_set_str,
object_property_set_link, object_property_set_bool,
object_property_set_int, object_property_set_uint, object_property_set,
object_property_set_qobject
};
expression obj, v, name, errp;
@@
- fun(obj, v, name, errp)
+ fun(obj, name, v, errp)
Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Convert that one manually.
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually. The other files using RXCPU that way don't need
conversion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
Pass &error_abort instead of NULL where the returned value is
dereferenced or asserted to be non-null. Drop a now redundant
assertion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-24-armbru@redhat.com>
vnc_display_print_local_addr() leaks the Error object when
qio_channel_socket_get_local_address() fails. Seems unlikely. Called
when we create a VNC display with vnc_display_open(). Plug the leak
by passing NULL to ignore the error.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-12-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Receiving the error in a local variable only to free it is less clear
(and also less efficient) than passing NULL. Clean up.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Jerome Forissier <jerome@forissier.org>
CC: Greg Kurz <groug@kaod.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200630090351.1247703-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The buffer is the captured input to pass to backends.
As we should not modify it, mark the argument const.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200505132603.8575-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Based on a mail on the qemu-devel mailing list at
https://lists.nongnu.org/archive/html/qemu-devel/2020-05/msg02909.html
and some internet research the GTK3 versions on supported
platforms are:
RHEL-7.4: 3.22.10
RHEL-7.5: 3.22.26
Debian (Stretch): 3.22.11
Debian (Buster): 3.24.5
OpenBSD (Ports): 3.22.30
FreeBSD (Ports): 3.22.29
OpenSUSE Leap 15: 3.22.30
SLE12-SP2: Unknown
SLE15: 3.22.30
Ubuntu (Bionic): 3.22.30
Ubuntu (Focal): 3.24.18
macOS (Homebrew): 3.22.30
This justifies increasing the minimum required GTK version in
QEMU to 3.22.0.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-11-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since GTK 3.22 the function gdk_event_get_scancode() is
available. On Windows this function returns keyboard scancodes
and some extended flags. These raw keyboard scancodes are much
better suited for this use case than the half-cooked win32
virtual-key codes because scancodes report the key position on
the keyboard and the positions are independent of national
language settings.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-10-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Without keyboard grab Windows currently handles the two win keys
and the key events are also sent to the guest. This is undesir-
able. Only one program should handle key events. This patch ap-
plies commit c68f74b02e "win32: do not handle win keys when the
keyboard is not grabbed" from project spice-gtk to ui/gtk.c to
fix this problem.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-9-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QEMU with SDL 1.2 display used to enable keyboard and mouse grab-
bing when started in full screen. The SDL 2.0 code tries to do
the same but fails to enable grabbing because sdl_grab_start(0)
returns early. To do it's work the sdl_grab_start() function
needs a pointer to a sdl2_console structure.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-7-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Wire up the keyboard hooking code on Windows to fix the AltGr
key and improve keyboard grabbing.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-6-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since the removal of GTK2 code in commit 89d85cde75 the code
around ignore_keys is unused. See commit 1a01716a30 "gtk: Avoid
accel key leakage into guest on console switch" why it was only
needed for GTK2.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-5-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This code was last used before commit 2ec78706d1 "ui: convert
GTK and SDL1 frontends to keycodemapdb".
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no way to grab the Ctrl-Alt-Del key combination on
Windows. This key combination will leave all three keys in a
stuck condition. This patch uses the grab-broken-event to
release the keys.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Wire up the keyboard hooking code on Windows to fix the AltGr
key and improve keyboard grabbing.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Import win32 keyboard hooking code from project spice-gtk. This
patch removes the extra left control key up/down input events
inserted by Windows for the right alt key up/down input events
with international keyboard layouts. Additionally there's some
code to grab the keyboard.
The next patches will use this code.
Only Windows needs this.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
I found SDL_GetWindowFromID() sometimes return NULL when I start qemu via
ssh forwarding even the window has been crated already. I am not sure
whether this is a bug of SDL, but we'd better check it carefully.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Message-id: 20200427132412.17909-1-changbin.du@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
-----BEGIN PGP SIGNATURE-----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=ibgH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging
trivial patches (20200504)
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
# gpg: Signature made Mon 04 May 2020 16:45:18 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-5.1-pull-request:
hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning
hw/timer/stm32f2xx_timer: Remove dead assignment
hw/gpio/aspeed_gpio: Remove dead assignment
hw/isa/i82378: Remove dead assignment
hw/ide/sii3112: Remove dead assignment
hw/input/adb-kbd: Remove dead assignment
hw/i2c/pm_smbus: Remove dead assignment
blockdev: Remove dead assignment
block: Avoid dead assignment
Compress lines for immediate return
chardev: Add macOS to list of OSes that support -chardev serial
MAINTAINERS: Update Keith Busch's email address
elf_ops: Don't try to g_mapped_file_unref(NULL)
hw/mem/pc-dimm: Fix line over 80 characters warning
hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug()
MAINTAINERS: Mark the LatticeMico32 target as orphan
timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write()
display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32()
scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets
- replaced result with QEMU_LOCK_GUARD if all unlocks at function end
- replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end
Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Compress two lines into a single line if immediate return statement is found.
It also remove variables progress, val, data, ret and sock
as they are no longer needed.
Remove space between function "mixer_load" and '(' to fix the
checkpatch.pl error:-
ERROR: space prohibited between function name and open parenthesis '('
Done using following coccinelle script:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Simran Singhal <singhalsimran0@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200401165314.GA3213@simran-Inspiron-5558>
[lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix warnings reported by Clang static code analyzer:
CC ui/input-linux.o
ui/input-linux.c:343:9: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGBIT(EV_REL, sizeof(relmap)), &relmap);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ui/input-linux.c:351:9: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGBIT(EV_ABS, sizeof(absmap)), &absmap);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ui/input-linux.c:354:13: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGABS(ABS_X), &absinfo);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ui/input-linux.c:357:13: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGABS(ABS_Y), &absinfo);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ui/input-linux.c:365:9: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGBIT(EV_KEY, sizeof(keymap)), keymap);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ui/input-linux.c:366:9: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGKEY(sizeof(keystate)), keystate);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200322161219.17757-1-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We only need these arrays when using the curses display.
Move them from the .bss to the .heap (sizes reported on
x86_64 host: screen[] is 64KiB, vga_to_curses 7KiB).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As we only use this array as input, make it const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Traditionally, the uint-specific property helpers only offer getters.
When adding object (or class) uint types, one must therefore use the
generic property helper if a setter is needed (and probably duplicate
some code writing their own getters/setters).
This enhances the uint-specific property helper APIs by adding a
bitwise-or'd 'flags' field and modifying all clients of that API to set
this paramater to OBJ_PROP_FLAG_READ. This maintains the current
behaviour whilst allowing others to also set OBJ_PROP_FLAG_WRITE (or use
the more convenient OBJ_PROP_FLAG_READWRITE) in the future (which will
automatically install a setter). Other flags may be added later.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We want to stop generating the old qemu-doc.html; first we
must update places that refer to it so they instead go to
our top level index.html documentation landing page.
The Cocoa UI has a menu option to bring up the documentation;
make it point to the new top level index.html instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-31-peter.maydell@linaro.org
Fixes: 6105683da3
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-11-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
misc.json contains definitions that are related to the system emulator,
so it can't be used for other tools like the storage daemon. This patch
moves basic functionality that is shared between all tools (and mostly
related to the monitor itself) into a new control.json, which could be
used in tools as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-3-kwolf@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Our official OSX support policy covers the last two released versions.
Currently that is 10.14 and 10.15. We also may work on older versions, but
don't guarantee it.
In commit 50290c002c in mid-2019 we introduced some uses of
CLOCK_MONOTONIC which incidentally broke compilation for pre-10.12 OSX
versions (see LP:1861551). We don't intend to fix that, so we might
as well drop the code in ui/cocoa.m which caters for pre-10.12
versions as well. (For reference, 10.11 fell out of Apple extended
security support in September 2018.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200201170534.22123-1-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When specified just set null_cursor to NULL so we get the default
pointer instead of a blank pointer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use DisplayOpts settings to set the new file-global cursor_hide
variable, stop using the qemu-global cursor_hide variable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use DisplayOpts settings instead of cursor_hide global variable.
Also make "-display sdl,show-cursor=on" work.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
gtk_widget_get_window() returns NULL if the widget's window is not
realized, and QEMU crashes. Example under gtk 3.22.30 (mate 1.20.1):
qemu-system-x86_64: Gdk: gdk_window_get_origin: assertion 'GDK_IS_WINDOW (window)' failed
(gdb) bt
#0 0x00007ffff496cf70 in gdk_window_get_origin () from /usr/lib64/libgdk-3.so.0
#1 0x00007ffff49582a0 in gdk_display_get_monitor_at_window () from /usr/lib64/libgdk-3.so.0
#2 0x0000555555bb73e2 in gd_refresh_rate_millihz (window=0x5555579d6280) at ui/gtk.c:1973
#3 gd_vc_gfx_init (view_menu=0x5555579f0590, group=0x0, idx=0, con=<optimized out>, vc=0x5555579d4a90, s=0x5555579d49f0) at ui/gtk.c:2048
#4 gd_create_menu_view (s=0x5555579d49f0) at ui/gtk.c:2149
#5 gd_create_menus (s=0x5555579d49f0) at ui/gtk.c:2188
#6 gtk_display_init (ds=<optimized out>, opts=0x55555661ed80 <dpy>) at ui/gtk.c:2256
#7 0x000055555583d5a0 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4358
Fixes: c4c00922cc and 28b58f19d2 (display/gtk: get proper refreshrate)
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jan Kiszka <jan.kiszka@web.de>
Message-id: 20200208161048.11311-3-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit c388f408b5 added the possibility to list the display
backends using '-display help'. Since the 'none' backend is
is not implemented as a DisplayChangeListenerOps, it is not
registered to the dpys[] array with qemu_display_register(),
and is not listed in the help output.
This might be confusing, as we list it in the man page:
-display type
Select type of display to use. This option is a replacement for
the old style -sdl/-curses/... options. Valid values for type are
none
Do not display video output. The guest will still see an
emulated graphics card, but its output will not be displayed
to the QEMU user. This option differs from the -nographic
option in that it only affects what is done with video
output; -nographic also changes the destination of the serial
and parallel port data.
Fix by manually listing the special 'none' backend in the help.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20200120192947.31613-1-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In my investigation, ZRLE always compresses better than ZLIB so
prioritize ZRLE over ZLIB, even if the client hints that ZLIB is
preferred.
zlib buffer is always reset in zrle_compress_data(), so using offset to
calculate next_out and avail_out is useless.
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Message-Id: <b5d129895d08a90d0a2a6183b95875bacfa998b8.1579582674.git.dirty@apple.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit de3f7de7f4.
Remove VNC optimization to reencode framebuffer update as raw if it's
smaller than the default encoding.
QEMU's implementation was naive and didn't account for the ZLIB z_stream
mutating with each compression. Because of the mutation, simply
resetting the output buffer's offset wasn't sufficient to "rewind" the
operation. The mutated z_stream would generate future zlib blocks which
referred to symbols in past blocks which weren't sent. This would lead
to artifacting.
Considering that ZRLE is never larger than raw and even though ZLIB can
occasionally be fractionally larger than raw, the overhead of
implementing this optimization correctly isn't worth it.
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit c4c00922cc introduced the use of the GdkMonitor API, which
was introduced in GTK+ 3.22:
https://developer.gnome.org/gdk3/stable/api-index-3-22.html#api-index-3.22
Unfortunately this break building with older versions, as on Ubuntu
Xenial which provides GTK+ 3.18:
$ lsb_release -cd
Description: Ubuntu 16.04.5 LTS
Codename: xenial
$ ./configure && make
GTK support yes (3.18.9)
GTK GL support no
[...]
CC ui/gtk.o
qemu/ui/gtk.c: In function ‘gd_vc_gfx_init’:
qemu/ui/gtk.c:1973:5: error: unknown type name ‘GdkMonitor’
GdkMonitor *monitor = gdk_display_get_monitor_at_window(dpy, win);
^
qemu/ui/gtk.c:1973:27: error: implicit declaration of function ‘gdk_display_get_monitor_at_window’ [-Werror=implicit-function-declaration]
GdkMonitor *monitor = gdk_display_get_monitor_at_window(dpy, win);
^
qemu/ui/gtk.c:1973:5: error: nested extern declaration of ‘gdk_display_get_monitor_at_window’ [-Werror=nested-externs]
GdkMonitor *monitor = gdk_display_get_monitor_at_window(dpy, win);
^
qemu/ui/gtk.c:1973:27: error: initialization makes pointer from integer without a cast [-Werror=int-conversion]
GdkMonitor *monitor = gdk_display_get_monitor_at_window(dpy, win);
^
qemu/ui/gtk.c:2035:28: error: implicit declaration of function ‘gdk_monitor_get_refresh_rate’ [-Werror=implicit-function-declaration]
refresh_rate_millihz = gdk_monitor_get_refresh_rate(monitor);
^
qemu/ui/gtk.c:2035:5: error: nested extern declaration of ‘gdk_monitor_get_refresh_rate’ [-Werror=nested-externs]
refresh_rate_millihz = gdk_monitor_get_refresh_rate(monitor);
^
cc1: all warnings being treated as errors
qemu/rules.mak:69: recipe for target 'ui/gtk.o' failed
make: *** [ui/gtk.o] Error 1
GTK+ provides convenient definition in <gdk/gdkversionmacros.h>
(already include by <gdk/gdk.h>) to check which API are available.
We only use the GdkMonitor API to get the monitor refresh rate.
Extract this code as a new gd_refresh_rate_millihz() function,
and check GDK_VERSION_3_22 is defined before calling its API.
If it is not defined, return 0. This is safe and fixes our build
failure (see https://travis-ci.org/qemu/qemu/builds/636992508).
Reported-by: Travis-CI
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200116115413.31650-1-philmd@redhat.com
Fixes: c4c00922cc (display/gtk: get proper refreshrate)
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because some VMs in QEMU can get GPU virtualization (using technologies
such as iGVT-g, as mentioned previously), they could produce a video
output that had a higher display refresh rate than of what the GTK
display was displaying. (fxp. Playing a video game inside of a Windows
VM at 60 Hz, while the output stood locked at 33 Hz because of defaults
set in include/ui/console.h)
Since QEMU does indeed have internal systems for determining frame
times as defined in ui/console.c.
The code checks for a variable called update_interval that it later
uses for time calculation. This variable, however, isn't defined
anywhere in ui/gtk.c and instead ui/console.c just sets it to
GUI_REFRESH_INTERVAL_DEFAULT which is 30
update_interval represents the number of milliseconds per display
refresh, and by doing some math we get that 1000/30 = 33.33... Hz
This creates the mentioned problem and what this patch does is that it
checks for the display refresh rate reported by GTK itself (we can take
this as a safe value) and just converts it back to a number of
milliseconds per display refresh.
Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200108121342.29597-1-pavlica.nikola@gmail.com
[ kraxel: style tweak: add blank line between vars and code ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We already print availabled devices with "-device help", or available
backends with "-netdev help" or "-chardev help". Let's provide a way
for the users to query the available display backends, too.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200108144702.29969-1-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Don't attempt to remove /dev/fdset files.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The file opened for ppm_save() may be a /dev/fdset, in which case a
dup fd is added to the fdset. It should be removed by calling
qemu_close(), instead of the implicit close() on fclose().
I don't see a convenient way to solve that with stdio streams, so I
switched the code to QIOChannel which uses qemu_close().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will allow to pre-open the file before running the async finish
handler and avoid potential monitor fdset races.
(note: this is preliminary work for asynchronous screendump support)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a function to be called when a graphic update is done.
Declare the QXL renderer as async: render_update_cookie_num counts the
number of outstanding updates, and graphic_hw_update_done() is called
when it reaches none.
(note: this is preliminary work for asynchronous screendump support)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We don't need Error **, as all callers pass local Error object, which
isn't used after the call, or NULL. Use Error * instead.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191205174635.18758-6-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have a setenv() wrapper in os-win32.c that no one is actually using.
Drop it and change to g_setenv() uniformly.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1576074210-52834-7-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If we try to start QEMU with "-k en-us", qemu prints a message and exits
with:
qemu-system-i386: could not read keymap file: 'en-us'
It's because this function is called way too early, before
qemu_add_data_dir() is called, and so qemu_find_file() fails.
To fix that, move init_keyboard_layout() from the class init function to the
instance init function.
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20190923220658.27007-1-laurent@vivier.eu
Fixes: 6105683da3 ("ui: add an embedded Barrier client")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The current code does not correctly pass the color pair information to
setcchar(), it instead always passes zero. This results in the curses
output always being in white on black.
This patch fixes this by using PAIR_NUMBER() to retrieve the color pair
number from the chtype value, and then passes that value as an argument
to setcchar().
Signed-off-by: Matthew Kilgore <mattkilgore12@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20191004035338.25601-3-mattkilgore12@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The curses API provides the A_ATTRIBUTES and A_CHARTEXT bit masks for
getting the attributes and character parts of a chtype, respectively. We
should use provided constants instead of using 0xff.
Signed-off-by: Matthew Kilgore <mattkilgore12@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20191004035338.25601-2-mattkilgore12@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
macOS API documentation says that before applicationDidFinishLaunching
is called, any events will not be processed. However, some events are
fired before it is called in macOS Catalina. This causes deadlock of
iothread_lock in handleEvent while it will be released after the
app_started_sem is posted.
This patch avoids processing events before the app_started_sem is
posted to prevent this deadlock.
Buglink: https://bugs.launchpad.net/qemu/+bug/1847906
Signed-off-by: Hikaru Nishida <hikarupsp@gmail.com>
Message-id: 20191015010734.85229-1-hikarupsp@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently when qemu receives a vnc connect, it creates a 'VncState' to
represent this connection. In 'vnc_worker_thread_loop' it creates a
local 'VncState'. The connection 'VcnState' and local 'VncState' exchange
data in 'vnc_async_encoding_start' and 'vnc_async_encoding_end'.
In 'zrle_compress_data' it calls 'deflateInit2' to allocate the libz library
opaque data. The 'VncState' used in 'zrle_compress_data' is the local
'VncState'. In 'vnc_zrle_clear' it calls 'deflateEnd' to free the libz
library opaque data. The 'VncState' used in 'vnc_zrle_clear' is the connection
'VncState'. In currently implementation there will be a memory leak when the
vnc disconnect. Following is the asan output backtrack:
Direct leak of 29760 byte(s) in 5 object(s) allocated from:
0 0xffffa67ef3c3 in __interceptor_calloc (/lib64/libasan.so.4+0xd33c3)
1 0xffffa65071cb in g_malloc0 (/lib64/libglib-2.0.so.0+0x571cb)
2 0xffffa5e968f7 in deflateInit2_ (/lib64/libz.so.1+0x78f7)
3 0xaaaacec58613 in zrle_compress_data ui/vnc-enc-zrle.c:87
4 0xaaaacec58613 in zrle_send_framebuffer_update ui/vnc-enc-zrle.c:344
5 0xaaaacec34e77 in vnc_send_framebuffer_update ui/vnc.c:919
6 0xaaaacec5e023 in vnc_worker_thread_loop ui/vnc-jobs.c:271
7 0xaaaacec5e5e7 in vnc_worker_thread ui/vnc-jobs.c:340
8 0xaaaacee4d3c3 in qemu_thread_start util/qemu-thread-posix.c:502
9 0xffffa544e8bb in start_thread (/lib64/libpthread.so.0+0x78bb)
10 0xffffa53965cb in thread_start (/lib64/libc.so.6+0xd55cb)
This is because the opaque allocated in 'deflateInit2' is not freed in
'deflateEnd'. The reason is that the 'deflateEnd' calls 'deflateStateCheck'
and in the latter will check whether 's->strm != strm'(libz's data structure).
This check will be true so in 'deflateEnd' it just return 'Z_STREAM_ERROR' and
not free the data allocated in 'deflateInit2'.
The reason this happens is that the 'VncState' contains the whole 'VncZrle',
so when calling 'deflateInit2', the 's->strm' will be the local address.
So 's->strm != strm' will be true.
To fix this issue, we need to make 'zrle' of 'VncState' to be a pointer.
Then the connection 'VncState' and local 'VncState' exchange mechanism will
work as expection. The 'tight' of 'VncState' has the same issue, let's also turn
it to a pointer.
Reported-by: Ying Fang <fangying1@huawei.com>
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-id: 20190831153922.121308-1-liq3ea@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows to receive mouse and keyboard events from
a Barrier server.
This is enabled by adding the following parameter on the
command line
... -object input-barrier,id=$id,name=$name ...
Where $name is the name declared in the screens section of barrier.conf
The barrier server (barriers) must be configured and must run on the
local host.
For instance:
section: screens
localhost:
...
VM-1:
...
end
section: links
localhost:
right = VM-1
VM-1:
left = localhost
end
Then on the QEMU command line:
... -object input-barrier,id=barrie0,name=VM-1 ...
When the mouse will move out of the screen of the local host on
the right, the mouse and the keyboard will be grabbed and all
related events will be send to the guest OS.
This is usefull when qemu is configured without emulated graphic card
but with a VFIO attached graphic card.
More information about Barrier can be found at:
https://github.com/debauchee/barrier
This avoids to install the Barrier server in the guest OS,
for instance when it is not supported or during the installation.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20190906083812.29487-1-laurent@vivier.eu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix egl_fb_read() to use the (destination) surface size instead of the
(source) framebuffer source for glReadPixels. Pass the DisplaySurface
instead of the pixeldata pointer to egl_fb_read() to make this possible.
With that in place framebuffer reads work fine even if the surface and
framebuffer sizes don't match, so we can remove the guest-triggerable
asserts in egl_scanout_flush().
Buglink: https://bugzilla.redhat.com//show_bug.cgi?id=1749659
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190909073911.24787-1-kraxel@redhat.com
This reverts commit 45db1ac157 ("modules-test: ui-spice-app is not
built as module") and fixes commit d8aec9d9f1 ("display: add -display
spice-app launching a Spice client").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190827140241.20818-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
We have ctrl-ctrl and alt-alt; why not shift-shift? That's my preferred
grab binding, personally.
Signed-off-by: Niklas Haas <git@haasn.xyz>
Message-id: 20190818105038.19520-1-qemu@haasn.xyz
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This prevents the compiler from reporting a possible uninitialized use
of maybe_keycode in function curses_refresh.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1563451264-46176-1-git-send-email-pbonzini@redhat.com
[ kraxel: whitespace fixup ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Audio functions no longer access glob_audio_state, instead they get an
AudioState as a parameter. This is required in order to support
multiple backends.
glob_audio_state is also gone, and replaced with a tailq so we can store
more than one states.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 67aef54f9e729a7160fe95c465351115e392164b.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-20-armbru@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
docs/devel/tracing.txt explains "since many source files include
trace.h, [the generated trace.h use] a minimum of types and other
header files included to keep the namespace clean and compile times
and dependencies down."
Commit 4815185902 "trace: Add per-vCPU tracing states for events with
the 'vcpu' property" made them all include qom/cpu.h via
control-internal.h. qom/cpu.h in turn includes about thirty headers.
Ouch.
Per-vCPU tracing is currently not supported in sub-directories'
trace-events. In other words, qom/cpu.h can only be used in
trace-root.h, not in any trace.h.
Split trace/control-vcpu.h off trace/control.h and
trace/control-internal.h. Have the generated trace.h include
trace/control.h (which no longer includes qom/cpu.h), and trace-root.h
include trace/control-vcpu.h (which includes it).
The resulting improvement is a bit disappointing: in my "build
everything" tree, some 1100 out of 6600 objects (not counting tests
and objects that don't depend on qemu/osdep.h) depend on a trace.h,
and about 600 of them no longer depend on qom/cpu.h. But more than
1300 others depend on trace-root.h. More work is clearly needed.
Left for another day.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-8-armbru@redhat.com>
Some of the generated qapi-types-MODULE.h are included all over the
place. Changing a QAPI type can trigger massive recompiling. Top
scorers recompile more than 1000 out of some 6600 objects (not
counting tests and objects that don't depend on qemu/osdep.h):
6300 qapi/qapi-builtin-types.h
5700 qapi/qapi-types-run-state.h
3900 qapi/qapi-types-common.h
3300 qapi/qapi-types-sockets.h
3000 qapi/qapi-types-misc.h
3000 qapi/qapi-types-crypto.h
3000 qapi/qapi-types-job.h
3000 qapi/qapi-types-block-core.h
2800 qapi/qapi-types-block.h
1300 qapi/qapi-types-net.h
Clean up headers to include generated QAPI headers only where needed.
Impact is negligible except for hw/qdev-properties.h.
This header includes qapi/qapi-types-block.h and
qapi/qapi-types-misc.h. They are used only in expansions of property
definition macros such as DEFINE_PROP_BLOCKDEV_ON_ERROR() and
DEFINE_PROP_OFF_AUTO(). Moving their inclusion from
hw/qdev-properties.h to the users of these macros avoids pointless
recompiles. This is how other property definition macros, such as
DEFINE_PROP_NETDEV(), already work.
Improves things for some of the top scorers:
3600 qapi/qapi-types-common.h
2800 qapi/qapi-types-sockets.h
900 qapi/qapi-types-misc.h
2200 qapi/qapi-types-crypto.h
2100 qapi/qapi-types-job.h
2100 qapi/qapi-types-block-core.h
270 qapi/qapi-types-block.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-3-armbru@redhat.com>
Linux terminal behavior (coming from vt100 I think) is somewhat strange
when it comes to line wraps: When a character is printed to the last
char cell of a line the cursor does NOT jump to the next line but stays
where it is. The line feed happens when the next character is printed.
So the valid range for the cursor position is not 0 .. width-1 but
0 .. width, where x == width represents the state where the line is
full but the cursor didn't jump to the next line yet.
The code for the 'clear from start of line' control sequence (ESC[1K)
fails to handle this corner case correctly and may call
console_clear_xy() with x == width. That will incorrectly clear the
first char cell of the next line, or in case the cursor happens to be on
the last line overflow the cell buffer by one character (three bytes).
Add a check to the loop to fix that.
Didn't spot any other places with the same problem. But it's easy to
miss that corner case, so also allocate one extra cell as precaution, so
in case we have simliar issues lurking elsewhere it at least wouldn't be
a buffer overflow.
v2: squashed in additional checks suggested by Christophe de Dinechin.
Reported-by: Alexander Oleinik <alxndr@bu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Message-id: 20190701075301.14165-1-kraxel@redhat.com
In fullscreen mode, the window property of cocoaView may not be the key
window, and the current implementation would not re-grab cursor by left click
in fullscreen mode after ungrabbed in fullscreen mode with hot-key ctrl-opt-g.
This patch used value of isFullscreen as a short-cirtuit condition for
relative input device grabbing.
Signed-off-by: Chen Zhang <tgfbeta@me.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 2D2F1191-E82F-4B54-A6E7-73FFB953DE93@me.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On Mojave, absolute input device, i.e. tablet, had trouble re-grabbing
the cursor in re-entry into the virtual screen area. In some cases,
the `window` property of NSEvent object was nil after cursor exiting from
window, hinting that the `-locationInWindow` method would return value in
screen coordinates. The current implementation used raw locations from
NSEvent without considering whether the value was for the window coordinates
or the macOS screen coordinates, nor the zooming factor for Zoom-to-Fit in
fullscreen mode.
In fullscreen mode, the fullscreen cocoa window might not be the key
window, therefore the location of event in virtual coordinates should
suffice.
This patches fixed boundary check methods for cursor in normal
and fullscreen with/without Zoom-to-Fit in Mojave.
Note: CGRect, -convertRectToScreen: and -convertRectFromScreen: were
used in coordinates conversion for compatibility reason.
Signed-off-by: Chen Zhang <tgfbeta@me.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: FA3FBC4F-5379-4118-B997-58FE05CC58F9@me.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Check and use QemuDmaBuf->modifier in egl_dmabuf_import_texture()
for dmabuf imports.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190529072144.26737-5-kraxel@redhat.com
Add modifier parameter to egl_get_fd_for_texture(), to return the used
modifier on dmabuf exports.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190529072144.26737-4-kraxel@redhat.com
wchar_t may resolve to be an unsigned long on 32-bit architectures.
Using the %x conversion specifier will then give a compiler warning:
ui/curses.c: In function ‘get_ucs’:
ui/curses.c:492:49: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘wchar_t’ {aka ‘long int’} [-Werror=format=]
492 | fprintf(stderr, "Could not convert 0x%04x "
| ~~~^
| |
| unsigned int
| %04lx
493 | "from wchar_t to a multibyte character: %s\n",
494 | wch, strerror(errno));
| ~~~
| |
| wchar_t {aka long int}
ui/curses.c:504:49: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘wchar_t’ {aka ‘long int’} [-Werror=format=]
504 | fprintf(stderr, "Could not convert 0x%04x "
| ~~~^
| |
| unsigned int
| %04lx
505 | "from a multibyte character to UCS-2 : %s\n",
506 | wch, strerror(errno));
| ~~~
| |
| wchar_t {aka long int}
Fix this by casting the wchar_t value to an unsigned long and using %lx
as the conversion specifier.
Fixes: b7b664a4fe
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20190527142540.23255-1-mreitz@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use a better interface for random numbers than rand().
Fail gracefully if for some reason we cannot use the crypto system.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There were 3 copies of this code, one of which used the wrong
data size for the failure indicator.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When allowing multiple down-events in a row (key autorepeat) we can't
use change_bit() any more to update the state, because autorepeat events
don't change the key state. We have to explicitly use set_bit() and
clear_bit() instead.
Cc: qemu-stable@nongnu.org
Fixes: 3592186015 kbd-state: don't block auto-repeat events
Buglink: https://bugs.launchpad.net/qemu/+bug/1828272
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190514042443.10735-1-kraxel@redhat.com
In a GVT-g setup with dmabuf and GTK GUI, the current 2D texture at
surface_gl_update_texture is not necessarily
surface->texture. Adding a glBindTexture fixes related crashes and
artifacts, and is generally more secure.
Signed-off-by: HOU Qiming <hqm03ster@gmail.com>
Tested-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-id: 20190507080501.26712-1-marcel.apfelbaum@gmail.com
[fixed malformed patch, rebase to master]
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The chars/attr fields are curses internals, setcchar and getcchar have
to be used instead.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Kamil Rytarowski <n54@gmx.com>
Message-Id: <20190427183307.12796-3-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
E.g. BSD and Solaris even use locale-specific encoding there.
We thus have to go through the native multibyte representation and use
mbrtowc/wcrtomb to make a proper conversion.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Kamil Rytarowski <n54@gmx.com>
Message-Id: <20190427183307.12796-2-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On some systems wchar_t is "long int", on others just "int".
So go cast to "long int" and adjust the printf format accordingly.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190402073018.17747-1-kraxel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of cleanup-trace-events.pl. Same funnies as in the
previous commit, of course. Manually shorten its change to
linux-user/trace-events to */signal.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-6-armbru@redhat.com
Message-Id: <20190314180929.27722-6-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The iconv_t are opened but never closed.
Spotted by Coverity: CID 1399708
Spotted by Coverity: CID 1399709
Spotted by Coverity: CID 1399713
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20190314172524.9290-1-samuel.thibault@ens-lyon.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
cchar_t can contain not only attr and chars fields, but also ext_color.
Initialize the whole structure to zero instead of enumerating fields.
Spotted by Coverity: CID 1399711
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20190315130932.26094-1-samuel.thibault@ens-lyon.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When adding '-fsanitize=undefined' in compiling configuration
and connect VM with vnc, it reports following error:
ui/vnc-enc-tight.c:910:13: runtime error: load of
misaligned address 0x621000466513 for type 'uint32_t',
which requires 4 byte alignment
This patch fix this issue.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-id: 20190318010442.14897-1-liq3ea@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This uses iconv to convert glyphs from the specified VGA font encoding to
unicode, and makes use of cchar_t instead of chtype when using ncursesw,
which allows to store all wide char as well as the WACS values. The default
charset is made CP437 since that is the charset of the hardware default VGA
font. This also makes the curses backend set the LC_CTYPE locale to "" to
allow curses to emit wide characters.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Eddie Kohler <ekohler@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190311135127.2229-3-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
curses will use it for proper wide output support.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20190311135127.2229-2-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I had to include an enum for audio sampling formats into qapi, but that
meant duplicating the audfmt_e enum. This patch replaces audfmt_e and
associated values with the qapi generated AudioFormat enum.
This patch is mostly a search-and-replace, except for switches where the
qapi generated AUDIO_FORMAT_MAX caused problems.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 01251b2758a1679c66842120b77c0fb46d7d0eaf.1552083282.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC server has historically had support for ACLs to check both the
SASL username and the TLS x509 distinguished name. The VNC server was
responsible for creating the initial ACL, and the client app was then
responsible for populating it with rules using the HMP 'acl_add' command.
This is not satisfactory for a variety of reasons. There is no way to
populate the ACLs from the command line, users are forced to use the
HMP. With multiple network services all supporting TLS and ACLs now, it
is desirable to be able to define a single ACL that is referenced by all
services.
To address these limitations, two new options are added to the VNC
server CLI. The 'tls-authz' option takes the ID of a QAuthZ object to
use for checking TLS x509 distinguished names, and the 'sasl-authz'
option takes the ID of another object to use for checking SASL usernames.
In this example, we setup two authorization rules. The first allows any
client with a certificate issued by the 'RedHat' organization in the
'London' locality. The second ACL allows clients with either the
'joe@REDHAT.COM' or 'fred@REDHAT.COM' kerberos usernames. Both checks
must pass for the user to be allowed.
$QEMU -object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\
endpoint=server,verify-peer=yes \
-object authz-simple,id=authz0,policy=deny,\
rules.0.match=O=RedHat,,L=London,rules.0.policy=allow \
-object authz-simple,id=authz1,policy=deny,\
rules.0.match=fred@REDHAT.COM,rules.0.policy=allow \
rules.0.match=joe@REDHAT.COM,rules.0.policy=allow \
-vnc 0.0.0.0:1,tls-creds=tls0,tls-authz=authz0,
sasl,sasl-authz=authz1 \
...other QEMU args...
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20190227145755.26556-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vnc aborts display update jobs on video mode switches and page flips.
That can cause vnc update stalls in case an unfinished vnc job gets
aborted. The vnc client will never receive the requested update then.
Fix that by copying the state from job_update back to update in that
case.
Reports complain about stalls with two or more clients being connected
at the same time, on some but not all connections. I suspect it can
also happen with a single connection, multiple connections only make
this more much likely to happen.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1662260
Reported-by: Ying Fang <fangying1@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ying Fang <fangying1@huawei.com>
Message-id: 20190305130930.24516-1-kraxel@redhat.com
This makes use of wide curses functions instead of 8bit functions. This
allows to type e.g. accented letters.
Unfortunately, key codes are then returned with values that could be
confused with wide characters by ncurses, so we need to add a maybe_keycode
variable to know whether the returned value is a key code or a character
(curses with wide support), or possibly both (curses without wide support).
The translation tables thus also need to be separated into key code
translation and character translation. The curses2foo helper makes it easier
to use them.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20190304210532.7840-1-samuel.thibault@ens-lyon.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
By default, curses will only report single ESC key event after 1s delay,
since ESC is also used for keypad escape sequences. This however makes
users believe that ESC is not working. Reducing to 25ms provides good user
experience, while still allowing 25ms for keypad sequences to get in, which
should be enough.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20190303172557.17139-1-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The OSX Mojave release is more picky about enforcing the Cocoa API
restriction that only the main thread may perform UI calls. To
accommodate this we need to restructure the Cocoa code:
* the special OSX main() creates a second thread and uses
that to call the vl.c qemu_main(); the original main
thread goes into the OSX event loop
* the refresh, switch and update callbacks asynchronously
tell the main thread to do the necessary work
* the refresh callback no longer does the "get events from the
UI event queue and handle them" loop, since we now use
the stock OSX event loop. Instead our NSApplication sendEvent
method will either deal with them or pass them on to OSX
All these things have to be changed in one commit, to avoid
breaking bisection.
Note that since we use dispatch_get_main_queue(), this bumps
our minimum version requirement to OSX 10.10 Yosemite (released
in 2014, unsupported by Apple since 2017).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-8-peter.maydell@linaro.org
Message-id: 20190214102816.3393-8-peter.maydell@linaro.org
When we switch away from our custom event handling, we still want to
be able to have first go at any events our application receives,
because in full-screen mode we want to send key events to the guest,
even if they would be menu item activation events. There are several
ways we could do that, but one simple approach is to subclass
NSApplication so we can implement a custom sendEvent method.
Do that, but for the moment have our sendEvent just invoke the
superclass method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-7-peter.maydell@linaro.org
Message-id: 20190214102816.3393-7-peter.maydell@linaro.org
Currently the handleEvent method will directly call the NSApp
sendEvent method for any events that we want to let OSX deal
with. When we rearrange the event handling code, the way that
we say "let OSX have this event" is going to change. Prepare
for that by refactoring so that handleEvent returns a flag
indicating whether it consumed the event.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-6-peter.maydell@linaro.org
Message-id: 20190214102816.3393-6-peter.maydell@linaro.org
Move the console/device menu creation code functions
further up in the source file, next to the code which
creates the initial menus. We're going to want to
change the location we call these functions from in
the next patch.
This commit is a pure code move with no other changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-5-peter.maydell@linaro.org
Message-id: 20190214102816.3393-5-peter.maydell@linaro.org
Factor out the long code sequence in main() which creates
the initial set of menus. This will make later patches
which move initialization code around a bit clearer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-4-peter.maydell@linaro.org
Message-id: 20190214102816.3393-4-peter.maydell@linaro.org
Currently the switchSurface method takes a DisplaySurface. We want
to change our DisplayChangeListener's dpy_gfx_switch callback
to do this work asynchronously on a different thread. The caller
of the switch callback will free the old DisplaySurface
immediately the callback returns, so to ensure that the
other thread doesn't access freed data we need to switch
to using the underlying pixman image instead. The pixman
image is reference counted, so we will be able to take
a reference to it to avoid it vanishing too early.
In this commit we only change the switchSurface method
to take a pixman image, and keep the flow of control
synchronous for now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-3-peter.maydell@linaro.org
Message-id: 20190214102816.3393-3-peter.maydell@linaro.org
The Cocoa UI should run on the main thread; this is enforced
in OSX Mojave. In order to be able to run on the main thread,
we need to make sure we hold the iothread lock whenever we
call into various QEMU UI midlayer functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-2-peter.maydell@linaro.org
Message-id: 20190214102816.3393-2-peter.maydell@linaro.org
The 'qemu_acl' type was a previous non-QOM based attempt to provide an
authorization facility in QEMU. Because it is non-QOM based it cannot be
created via the command line and requires special monitor commands to
manipulate it.
The new QAuthZ subclasses provide a superset of the functionality in
qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor
commands are converted to use the new QAuthZSimple data type instead
in order to provide temporary backwards compatibility.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new display backend that will configure Spice to allow a remote
client to control QEMU in a similar fashion as other QEMU display
backend/UI like GTK.
For this to work, it will set up Spice server with a unix socket, and
register a VC chardev that will be exposed as Spice ports. A QMP
monitor is also exposed as a Spice port, this allows the remote client
fuller qemu control and state handling.
- doesn't handle VC set_echo() - this doesn't seem a strong
requirement, very few front-end use it
- spice options can be tweaked with other -spice arguments
- Windows support shouldn't be hard to do, but will probably use a TCP
port instead
- we may want to watch the child process to quit automatically if it
crashed
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-12-marcandre.lureau@redhat.com
[ kraxel: squash incremental fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If no -name is given, let's use a friendly "QEMU version" server
name. This is sometime exposed on spice client side, for example on
remote-viewer title.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-11-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
spice_server_vm_start/stop() was added to help migration state (commit
f5bb039c6d).
However, a paused VM could keep running the spice server. This will
allow a Spice client to keep sending commands to a spice chardev. This
allows to stop/cont a VM from a Spice monitor port. Character
devices (vdagent/usb/smartcard/..) should not read from Spice when the
VM is paused.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Passing several -spice options to qemu command line, or calling
several time qemu_opts_set() will ignore all but the first option
list. Since the spice server is a singleton, it makes sense to merge
all the options, the last value being the one taken into account.
This changes the behaviour from, for ex:
$ qemu... -spice port=5900 -spice port=5901 -> port: 5900
to:
$ qemu... -spice port=5900 -spice port=5901 -> port: 5901
(if necessary we could instead produce an error when an option is
given twice, although this makes handling default values and such more
complicated)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-5-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The Spice server doesn't like to be started or stopped twice . It
aborts with:
(process:6191): Spice-ERROR **: 19:29:35.912: red-worker.c:623:handle_dev_start: assertion `!worker->running' failed
It's easy to avoid that situation since qemu spice_display_is_running
tracks the server state.
After the commit "spice: do not stop spice if VM is paused", it will
be possible to pause and resume the VM, and this will call
qemu_spice_display_start() twice. The easiest is to add a check for
spice_display_is_running with this patch to avoid the assert.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The license information in this file is very messy. A short note at
the beginning says GPL first, but the long boilerplate code then
talks about "GNU Lesser General Public License version 2.0". First,
there is no such version of the "GNU Lesser GPL", it only started with
version 2.1. In version 2.0, it was still called "GNU Library GPL"
instead. Second, you can easily get the license of this file wrong
if you only quickly glance at the long boilerplate code.
Anyway, looking at the text of the LGPL (see COPYING.LIB in the top
directory), the license clearly states in section "3." that one should
rather replace the license information with the GPL information in
such a case of a mixture instead. Thus let's clean up the confusing
statements and use the proper GPL text only.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 1550731902-28842-1-git-send-email-thuth@redhat.com
[ kraxel: s/v2/v2+/ as requested by Daniel ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qkbd_state_key_event() does that for us.
Fixes: 07333e1ca3 kbd-state: use state tracker for sdl2
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190208072744.10687-1-kraxel@redhat.com
Calls the new SPICE QXL interface function spice_qxl_set_device_info to
set the hardware address of the graphics device represented by the QXL
interface (e.g. a PCI path) and the device display IDs (the IDs of the
device's monitors that belong to this QXL interface).
Also stops using the deprecated spice_qxl_set_max_monitors, the new
interface function replaces it.
Signed-off-by: Lukáš Hrázký <lhrazky@redhat.com>
Message-Id: <20190215150919.8263-1-lhrazky@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Having to include qapi-events.h just for QAPIEvent is suboptimal, but
quite tolerable now. It'll become problematic when we have events
conditional on the target, because then qapi-events.h won't be usable
from target-independent code anymore. Avoid that by generating it
into separate files.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-6-armbru@redhat.com>
