Some IFLA_* symbols can be missing in the host linux/if_link.h,
but as they are enums and not "#defines", check in "configure" if
last known (IFLA_PROTO_DOWN) is available and if not, disable
management of NETLINK_ROUTE protocol.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Since pulseaudio 1.0 it's possible to set the individual stream volume
rather than setting the device volume. With this, setting hardware mixer
of a emulated sound card doesn't mess up the volume configuration of the
host.
A side effect is that this limits compatible pulseaudio version to 1.0
which was released on 2011-09-27.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 78853815be2069971b89b3a2e3181837064dd8f3.1462962512.git.pkrempa@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The clang compiler supports a useful compiler option -Weverything,
and GCC also has other warnings not enabled by -Wall.
If glib header files trigger a warning, however, testing glib with
-Werror will always fail. A size mismatch is also detected without
-Werror, so simply remove it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <1461879221-13338-1-git-send-email-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As all other devel packages are written in the form "name devel",
use this form for libcap devel and libattr devel, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vte >= 0.37 expores API version 2.91, which is where all the active
development is. qemu builds and runs fine with that version, so use it
if it's available.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: b4f0375647f7b368d3dbd3834aee58cb0253566a.1462557436.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I accidentally tried --with-sdlabi="1.0", and it failed much later in
a weird way. Instead, throw an error if the value isn't in our
whitelist.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: 60e4822e17697d257a914df03bdb9fff4b4c0490.1462557436.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Right now if SDL2 is installed but not SDL1, default configure will
entirely disable SDL. Check upfront for SDL2 using pkg-config, but
still prefer SDL1 if both versions are installed.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: c9e570b5964d128a3595efe3170129a3da459776.1462557436.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes build failure with --enable-xfsctl and
new linux headers (>=4.5) and older xfsprogs(<4.5):
In file included from /usr/include/xfs/xfs.h:38:0,
from /var/tmp/portage/app-emulation/qemu-2.5.0-r1/work/qemu-2.5.0/block/raw-posix.c:97:
/usr/include/xfs/xfs_fs.h:42:8: error: redefinition of ‘struct fsxattr’
struct fsxattr {
^
In file included from /var/tmp/portage/app-emulation/qemu-2.5.0-r1/work/qemu-2.5.0/block/raw-posix.c:60:0:
/usr/include/linux/fs.h:155:8: note: originally defined here
struct fsxattr {
This is really a bug in the system headers, but we can work around it
by defining HAVE_FSXATTR in the QEMU headers if linux/fs.h provides
the struct, so that xfs_fs.h doesn't try to define it as well.
CC: qemu-trivial@nongnu.org
CC: Markus Armbruster <armbru@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Stefan Weil <sw@weilnetz.de>
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>
[PMM: adjusted commit message, comments]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Upon receiving an I/O error after an fsync, by default gluster will
dump its cache. However, QEMU will retry the fsync, which is especially
useful when encountering errors such as ENOSPC when using the werror=stop
option. When using caching with gluster, however, the last written data
will be lost upon encountering ENOSPC. Using the write-behind-cache
xlator option of 'resync-failed-syncs-after-fsync' should cause gluster
to retain the cached data after a failed fsync, so that ENOSPC and other
transient errors are recoverable.
Unfortunately, we have no way of knowing if the
'resync-failed-syncs-after-fsync' xlator option is supported, so for now
close the fd and set the BDS driver to NULL upon fsync error.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Enable seccomp on MIPS since libseccomp version 2.2.0 when MIPS support
was first added.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Support for the PBKDF functions in nettle was not introduced
until version 2.6. Some distros QEMU targets have older
versions and thus lack PBKDF support. Address this by doing
a check in configure for the desired function and then skipping
compilation of the nettle-pbkdf.o module
Reported-by: Wen Congyang <wency@cn.fujitsu.com>
Tested-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW9ErPAAoJEL/70l94x66DJfEH/A/QkMpAhrgNdyVsahzsGrzE
wx5gHFIc1nBYxyr62w4apUb5jPB7zaXu0LA7EAWDeAe0pyP8hZzLT9kJyOEDsuJu
zwKN2QeLSNMtPbnbKN0I/YQ2za2xX1V5ruhSeOJoVslUI214hgnAURaGshhQNzuZ
2CluDT9KgL5cQifAnKs5kJrwhIYShYNQB+1eDC/7wk28dd/EH+sPALIoF+rqrSmt
Zu4Mdqd+9Ns+oKOjA6br9ULq/Hzg0aDfY82J+XLVVqfF3PXQe8rTDmuMf/7jTn+M
Un7ZOcei9oZF2/9vfAfKQpDCcgD9HvOUSbgqV/ubmkPPmN/LNJzeKj0fBhrRN+Y=
=K12D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (28 commits)
target-i386: implement PKE for TCG
config.status: Pass extra parameters
char: translate from QIOChannel error to errno
exec: fix error handling in file_ram_alloc
cputlb: modernise the debug support
qemu-log: support simple pid substitution for logs
target-arm: dfilter support for in_asm
qemu-log: dfilter-ise exec, out_asm, op and opt_op
qemu-log: new option -dfilter to limit output
qemu-log: Improve the "exec" TB execution logging
qemu-log: Avoid function call for disabled qemu_log_mask logging
qemu-log: correct help text for -d cpu
tcg: pass down TranslationBlock to tcg_code_gen
util: move declarations out of qemu-common.h
Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
hw: explicitly include qemu-common.h and cpu.h
include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
Move ParallelIOArg from qemu-common.h to sysemu/char.h
Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
scripts/clean-includes
This allows you to do:
./config.status --the-option-you-forgot
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1452599928-7471-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We used to support only pdcurses for Windows, but recently Cygwin added
mingw64-i686-ncurses and mingw64-x86_64-ncurses packages which are
supported now, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The LUKS data format includes use of PBKDF2 (Password-Based
Key Derivation Function). The Nettle library can provide
an implementation of this, but we don't want code directly
depending on a specific crypto library backend. Introduce
a new include/crypto/pbkdf.h header which defines a QEMU
API for invoking PBKDK2. The initial implementations are
backed by nettle & gcrypt, which are commonly available
with distros shipping GNUTLS.
The test suite data is taken from the cryptsetup codebase
under the LGPLv2.1+ license. This merely aims to verify
that whatever backend we provide for this function in QEMU
will comply with the spec.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are three backend impls provided. The preferred
is gnutls, which is backed by nettle in modern distros.
The gcrypt impl is provided for cases where QEMU build
against gnutls is disabled, but crypto is still desired.
No nettle impl is provided, since it is non-trivial to
use the nettle APIs for random numbers. Users of nettle
should ensure gnutls is enabled for QEMU.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Detect if the compiler can support the ifun and avx2, if so, set
CONFIG_AVX2_OPT which will be used to turn on the avx2 instruction
optimization.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1457416397-26671-2-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Set CONFIG_OPENGL_DMABUF in case both mesa and libepoxy are
new enough to have support for dma-buf import/export.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=GtaJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-2016-02-12' into staging
Xen 2016-02-12
# gpg: Signature made Fri 12 Feb 2016 17:28:09 GMT using RSA key ID 70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
* remotes/sstabellini/tags/xen-2016-02-12:
xen: Drop __XEN_LATEST_INTERFACE_VERSION__ checks from prior to Xen 4.2
xen: move xenforeignmemory compat layer into common place
xen: drop XenXC and associated interface wrappers
xen: drop xen_xc_hvm_inject_msi wrapper
xen: drop support for Xen 4.1 and older.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Libtool support was needed to build shared library for libcacard.
Now there's no need to use libtool, and since the build system is
already complicated enough, we have a way to slightly de-complicate
it.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Xen 4.2 become unsupported upstream in 09/2015 (see
http://wiki.xen.org/wiki/Xen_Release_Features). However as far as the
interfaces provided by the toolstack libraries go 4.2 and 4.3 are
indistinguishable.
Therefore drop support for Xen 4.1 and earlier which removes a whole
pile of compatibility code which makes future work (to use stable
library interfaces provided by upstream) more difficult. In particular
all supported versions now use a pointer as a libxc handle (4.1 and
earlier used an integer, resulting in various shim layers).
Also Xen 4.2 was the first version of Xen to formally support upstream
QEMU (as a preview) so that makes sense as a cut-off now.
This change drops all the configure-y and resulting ifdefs in a mostly
mechanical way. A follow up will refactor wrappers which are now
unused.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Developers on 64-bit machines will often try to perform a
32-bit build of QEMU by running
./configure --extra-cflags="-m32"
Unfortunately if PKG_CONFIG_LIBDIR is not set to point to
the location of the 32-bit pkg-config files, then configure
will silently pick up the 64-bit pkg-config files and still
succeed.
This causes a problem for glib because it means QEMU will
be pulling in /usr/lib64/glib-2.0/include/glibconfig.h
instead of /usr/lib/glib-2.0/include/glibconfig.h
This causes problems because the 'gsize' type (defined as
'unsigned long') will no longer be fully compatible with
the 'size_t' type (defined as 'unsigned int'). Although
both are the same size, the compiler refuses to allow
casts from 'unsigned long *' to 'unsigned int *' as they
are different pointer types. This results in non-obvious
compiler errors when building QEMU eg
qga/commands-posix.c: In function ‘qmp_guest_set_user_password’:
qga/commands-posix.c:1912:55: error: passing argument 2 of ‘g_base64_decode’ from incompatible pointer type [-Werror=incompatible-pointer-types]
rawpasswddata = (char *)g_base64_decode(password, &rawpasswdlen);
^
In file included from /usr/include/glib-2.0/glib.h:35:0,
from qga/commands-posix.c:14:
/usr/include/glib-2.0/glib/gbase64.h:52:9: note: expected ‘gsize * {aka long unsigned int *}’ but argument is of type ‘size_t * {aka unsigned int *}’
guchar *g_base64_decode (const gchar *text,
^
cc1: all warnings being treated as errors
To detect this problem, add a check to configure that
verifies that GLIB_SIZEOF_SIZE_T matches sizeof(size_t).
If this fails print a warning suggesting that the dev
probably needs to set PKG_CONFIG_LIBDIR.
On Fedora x86_64 it passes with any of:
# ./configure
# PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m32"
# PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m64"
And fails with a mis-match
# PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m32"
# PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m64"
ERROR: sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T.
You probably need to set PKG_CONFIG_LIBDIR
to point to the right pkg-config files for your
build target
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1453885245-15562-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This enables integration with other QEMU logging facilities.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-11-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add the XML and functions to get and set VSX registers.
Signed-off-by: Anton Blanchard <anton@samba.org>
(fixed little-endian guests)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Until the previous patch this relied on xc_fd(), which was only
implemented for Xen 4.0 and earlier.
Given this wasn't working since Xen 4.0 I have marked this as disabled
by default.
Removing this support drops the use of a bunch of symbols from
libxenctrl, specifically:
- xc_domain_create
- xc_domain_destroy
- xc_domain_getinfo
- xc_domain_max_vcpus
- xc_domain_setmaxmem
- xc_domain_unpause
- xc_evtchn_alloc_unbound
- xc_linux_build
This is another step towards only using Xen libraries which provide a
stable inteface.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
In Xen 4.7 we are refactoring parts libxenctrl into a number of
separate libraries which will provide backward and forward API and ABI
compatiblity.
Specifically libxenevtchn, libxengnttab and libxenforeignmemory.
Previous patches have already laid the groundwork for using these by
switching the existing compatibility shims to reflect the intefaces to
these libraries.
So all which remains is to update configure to detect the libraries
and enable their use. Although they are notionally independent we take
an all or nothing approach to the three libraries since they were
added at the same time.
The only non-obvious bit is that we now open a proper xenforeignmemory
handle for xen_fmem instead of reusing the xen_xc handle.
Build tested with 4.0 .. 4.6 (inclusive) and the patches targetting
4.7 which adds these libraries.
This uses CONFIG_XEN_CTRL_INTERFACE_VERSION == 471 to cover the
introduction of these new interfaces.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Found thanks to shellcheck!
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Unfortunately the OpenBSD pdksh does not like brackets inside
the right part of a ${variable+word} parameter expansion:
$ echo "${a+($b)}"
ksh: ${a+($b)}": bad substitution
though both bash and dash accept them. In any case this line
was causing odd output in the case where nettle is not present:
nettle no ()
(because if nettle is not present then $nettle will be "no",
not a null string or unset).
Rewrite it to just use an if.
This bug was originally introduced in becaeb726 and was present
in the 2.4.0 release.
Fixes: https://bugs.launchpad.net/qemu/+bug/1525682
Reported-by: Dmitrij D. Czarkoff
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1450105357-8516-1-git-send-email-peter.maydell@linaro.org
Implement a QIOChannel subclass that supports sockets I/O.
The implementation is able to manage a single socket file
descriptor, whether a TCP/UNIX listener, TCP/UNIX connection,
or a UDP datagram. It provides APIs which can listen and
connect either asynchronously or synchronously. Since there
is no asynchronous DNS lookup API available, it uses the
QIOTask helper for spawning a background thread to ensure
non-blocking operation.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The check for stack-protector support consisted in compiling and linking
the test program below (output by function write_c_skeleton()) with the
compiler flag -fstack-protector-strong first and then with
-fstack-protector-all if the first one failed to work:
int main(void) { return 0; }
This caused false positives when using certain toolchains in which the
compiler accepted -fstack-protector-strong but no support was provided
by the C library, since for this stack-protector variant the compiler
emits canary code only for functions that meet specific conditions
(local arrays, memory references to local variables, etc.) and the code
fragment under test included none of them (hence no stack protection
code generated, no link failure).
This fix changes the test program used for -fstack-protector checks to
include a function that meets conditions which cause the compiler to
generate canary code in all variants.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently if the user's compiler works for creating .o files but
their linker is broken such that compiling an executable from a
C file does not work, we will report a misleading error message
about the compiler not supporting __thread (since that happens
to be the first test we run which requires a working linker).
Explicitly check that compile_prog works as well as compile_object,
so that people whose toolchain setup is broken get a more helpful
error message.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QEMU uses threads / coroutines, therefore support for thread local storage
and thread safe libraries (-D_MT) must be enabled by using -mthreads.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Fixes all over the place.
This also re-enables a test we disabled in 2.5 cycle
now that there's a way not to get a warning from it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWTc5PAAoJECgfDbjSjVRpCJEH/jh1CeWCG7zRBXelWK2F5Cgr
ls+V1sCX7NvkfCa3cDZI8imGjYQUr6EiXtqxPArEVMjmUOUzEHPkOx3ICPpfMU7o
RCVNPELav6VBhGDf3mcIVjlDDN9Syhd90xdgaD8dbeSA0UJFHRTdobNlYpYwiRmp
OAASUawEWLGA5cG+W6MBFWiPQWChpNRK3yK3RVduL71TIe4heuHBez4qTB2QKYvF
KM2nRvpkBY21frXJQqWPlCJ6jsdjI/Fl2xR1t4C9qv0TKcB9FESMmH3Jff2bwMQM
8OSnTIRqYaqT6kJkk3Kns8a+porJMnn69OwBRehLmLW/rmx9HQrR2Ey7bYtgd0Y=
=CrrY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, pc: fixes for 2.5
Fixes all over the place.
This also re-enables a test we disabled in 2.5 cycle
now that there's a way not to get a warning from it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 19 Nov 2015 13:27:43 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
exec: silence hugetlbfs warning under qtest
tests: re-enable vhost-user-test
acpi: fix buffer overrun on migration
vhost-user: fix log size
vhost-user: ignore qemu-only features
specs/vhost-user: fix spec to match reality
tests/vhost-user-bridge: implement logging of dirty pages
i440fx: print an error message if user tries to enable iommu
q35: Check propery to determine if iommu is set
vhost-user: start/stop all rings
vhost-user: print original request on error
vhost-user-test: support VHOST_USER_SET_VRING_ENABLE
vhost-user: update spec description
vhost: don't send RESET_OWNER at stop
vhost: let SET_VRING_ENABLE message depends on protocol feature
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 7fe34ca9c2 actually disabled vhost-user-test altogether,
since CONFIG_VHOST_NET is a per-target config variable.
tests/vhost-user-test is already x86/x64 softmmu specific test, in order
to enable it correctly, kvm & vhost-net are also conditions. To check
that, set CONFIG_VHOST_NET_TEST_$target when kvm is also enabled.
Since "check-qtest-x86_64-y = $(check-qtest-i386-y)", avoid duplication
when both x86 & x64 are enabled.
Other targets than x86 aren't enabled yet, and is intentionally left as
a future improvement, since I can't easily test those.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drop the libseccomp required version back to 2.1.0, restoring the ability
to build w/ --enable-seccomp on Ubuntu 14.04.
Commit 4cc47f8b3c tightened the dependency
on libseccomp from version 2.1.0 to 2.1.1. This broke building on Ubuntu
14.04, the current Ubuntu LTS release. The commit message didn't mention
any specific functional need for 2.1.1, just that it was the most recent
stable version at the time. I reviewed the changes between 2.1.0 and 2.1.1,
but it looks like that update just contained minor fixes and cleanups - no
obvious (to me) new interfaces or critical bug fixes.
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
This is a revert of ae6e8ef11e, but with a bit of refactoring,
and also specifically adding arm/aarch64, rather than all
architectures. Currently, libseccomp code appears to also support
mips, ppc, and s390. We could therefore allow qemu to enable
seccomp for those platforms as well, with additional configure
patches, given they're tested and proven to work.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Due to the addition of HVMlite and the requirement to always provide a
valid xc_domain_configuration_t, xc_domain_create now always takes an arch
domain config, which can be NULL in order to mimic previous behaviour.
Add a small stub called xen_domain_create that encapsulates the correct
call to xc_domain_create depending on the libxc version detected.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
I broke this when adding checks for clang++.
Reported-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1447345789-840-1-git-send-email-jsnow@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit b553a04280 inadvertently disabled optimization
for all non-fortify builds. Fix this bug so we only do an
unoptimized build if we want debug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1447082049-25099-1-git-send-email-peter.maydell@linaro.org
The '--enable-vnc-tls' option to configure was removed in
commit 3e305e4a47
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Aug 6 14:39:32 2015 +0100
ui: convert VNC server to use QCryptoTLSSession
This removes the corresponding help string.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to ./configure all options should have both --enable-foo and
--disable-foo:
# Always add --enable-foo and --disable-foo command line args.
# Distributions want to ensure that several features are compiled in, and it
# is impossible without a --enable-foo that exits if a feature is not found.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1446473183-24250-1-git-send-email-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some versions of clang may have difficulty compiling glibc headers when
-D_FORTIFY_SOURCE is used. For example, Clang++ 3.5.0-9.fc22 cannot
compile glibc's stdio headers when -D_FORTIFY_SOURCE=2 is used. This
manifests currently as build failures with clang and any arm target.
According to LLVM dev Richard Smith, clang does not target or support
FORTIFY_SOURCE + glibc, and it should not be relied on.
"It's still an unsupported combination, and while it might compile, some
of the checks are unlikely to work because they require a frontend
inliner to be useful"
See: http://lists.llvm.org/pipermail/cfe-dev/2015-November/045846.html
Conclusion: disable fortify-source if we appear to be using clang instead
of testing for compile success or failure, which may be incidental or not
indicative of proper support of the feature.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <1446583422-10153-1-git-send-email-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the user is using ccache during the configuration step,
it may interfere with some of the configuration tests,
particularly the "Is ccache interfering with macro analysis" step,
which is a bit of a poetic problem.
1) Disallow ccache from reading from the cache during configure,
but don't disable it entirely to allow us to see if it causes other
problems.
2) Force off CCACHE_CPP2 during the ccache test to get a deterministic
answer over whether or not we need to enable that feature later.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <1446055000-29150-1-git-send-email-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We now use epoxy to load opengl libraries. This means we don't need to
link opengl libraries directly if interfaces handled by epoxy. With
this, we just need epoxy headers and epoxy's *.so to build.
Tested with epoxy-1.3.1.
- sdl2/gtk/console egl stuff doesn't require other than epoxy
- milkymist-tmu2 glx stuff doesn't require other than epoxy
(lm32 test is limited, because can't find mmone-bios.bin, so just test
to load libGL with "./lm32-softmmu/qemu-system-lm32 -M milkymist,accel=qtest")
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
[ lm32 tested by kraxel ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When using ivshmem devices, notifications between guests can be sent as
interrupts using a ivshmem-server (typical use described in documentation).
The client is provided as a debug tool.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
[fix a valgrind warning, option and server_close() segvs, extra server
headers includes, getopt() return type, out-of-tree build, use qemu
event_notifier instead of eventfd, fix x86/osx warnings - Marc-André]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The previous commit
commit 9a2fd4347c
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Apr 13 14:01:39 2015 +0100
crypto: add sanity checking of TLS x509 credentials
defined new variables $TEST_LIBS and $TEST_CFLAGS and
used them in tests/Makefile to augment $LIBS and $CFLAGS.
Unfortunately this overlooks the fact that tests/Makefile
is not executed via recursive-make, it is just pulled into
the top level Makefile via an include statement. So rather
than just augmenting the compiler/linker flags for tests
it polluted the global flags.
This is thought to be behind a reported failure when
building the pixman module as a sub-module, since global
$CFLAGS are passed down to configure in pixman.
This change removes the $TEST_LIBS and $TEST_CFLAGS
replacing them with $TASN1_LIBS and $TASN1_CFLAGS,
setting only against specific objects/executables
that need them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the choice of whether to use nettle or gcrypt is
made based on what gnutls is linked to. There are times
when it is desirable to be able to force build against a
specific library. For example, if testing changes to QEMU's
crypto code all 3 possible backends need to be checked
regardless of what the local gnutls uses.
It is also desirable to be able to enable nettle/gcrypt
for cipher/hash algorithms, without enabling gnutls
for TLS support.
This gives two new configure flags, which allow the
following possibilities
Automatically determine nettle vs gcrypt from what
gnutls links to (recommended to minimize number of
crypto libraries linked to)
./configure
Automatically determine nettle vs gcrypt based on
which is installed
./configure --disable-gnutls
Force use of nettle
./configure --enable-nettle
Force use of gcrypt
./configure --enable-gcrypt
Force use of built-in AES & crippled-DES
./configure --disable-nettle --disable-gcrypt
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
New features:
VT-d support for devices behind a bridge
vhost-user migration support
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWKMrnAAoJECgfDbjSjVRpVL0H/iRc31o00QE4nWBRpxUpf8WJ
V5RWE8qKkDgBha5bS5Nt4vs8K4jkkHGXCbmygMidWph96hUPK8/yHy1A/wmpBibB
5hVSPDK8onavNGJwpaWDrkhd9OhKAaKOuu49T6+VWJGZY/uX5ayqmcN934y0NPUa
4EhH5tyxPpYOYeW9i/VOMQ374gCJcpzYBMug4NJZRyFpfz/b2mzAQtoqw3EsPtB0
vpVJ+fKiCyG39HFKQJW7cL12yBeXOoyhjfDxpumLqwLWMfmde+vJwTFx6wbechgV
aU3jIdvUX8wHCNYaB937NsMaDALoGNqUjbpKnf+xD1w7xr9pwTzdyrGH3rpGLEE=
=+G1+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, pc, virtio features, fixes, cleanups
New features:
VT-d support for devices behind a bridge
vhost-user migration support
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 22 Oct 2015 12:39:19 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (37 commits)
hw/isa/lpc_ich9: inject the SMI on the VCPU that is writing to APM_CNT
i386: keep cpu_model field in MachineState uptodate
vhost: set the correct queue index in case of migration with multiqueue
piix: fix resource leak reported by Coverity
seccomp: add memfd_create to whitelist
vhost-user-test: check ownership during migration
vhost-user-test: add live-migration test
vhost-user-test: learn to tweak various qemu arguments
vhost-user-test: wrap server in TestServer struct
vhost-user-test: remove useless static check
vhost-user-test: move wait_for_fds() out
vhost: add migration block if memfd failed
vhost-user: use an enum helper for features mask
vhost user: add rarp sending after live migration for legacy guest
vhost user: add support of live migration
net: add trace_vhost_user_event
vhost-user: document migration log
vhost: use a function for each call
vhost-user: add a migration blocker
vhost-user: send log shm fd along with log_base
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check if memfd_create() is part of system libc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
Currently POSIX builds rely on 'qemu-ga' target to do qga-only
distributable build. On w32, as with most standalone binary targets,
we rely on 'qemu-ga.exe' target.
Unlike with POSIX, qemu-ga for w32 has a number of related targets
such as VSS DLL and MSI package. We can do the full distributable
qga-only build on w32 with:
make qemu-ga.exe
or:
make msi
To make that work, we tie VSS dependencies onto qemu-ga.exe.
However, in reality the DLL isn't part of the binary, so we use a
filter to pull them out of the LINK recipe, which attempts to link
against prereqs for binary targets. Additionally, it could be argued
that VSS is a separate distributable, and shouldn't be implied by
qemu-ga.exe binary target.
To avoid this, we can tie the VSS dependencies only to the 'msi'
target, but that would make it impossible to do a qga-only build of
the w32 distributable without building the 'msi' package, which was
supported in the past.
An alternative approach is to add a new target to build the whole
distributable. w32 allows us to use the same build target we use
on POSIX, 'qemu-ga', since the current binary-only target on w32
is 'qemu-ga.exe'.
To further simplify the build, we also make 'qemu-ga' build the MSI
package if the appropriate ./configure options are set, making the
full qga-only build the same on both POSIX and w32: `make qemu-ga`
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
RHEL-6 and SLES-11 provide Python 2.6. It'll also work on OS X back
to 10.6.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441396383-17304-1-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows virtio-gpu to render in 3d mode.
Uses native opengl support which is present
in gtk versions 3.16 and newer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add virglrenderer library detection. Add 3d mode to virtio-gpu,
wire up virglrenderer library. When in 3d mode render using the
new context management and texture scanout callbacks.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Let's expose some virtual/fake registers as virtualization specific
registers.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1443689387-34473-3-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The oslib-win32 file currently provides a localtime_r and
gmtime_r replacement unconditionally. Some versions of
Mingw-w64 would provide crude macros for localtime_r/gmtime_r
which QEMU takes care to disable. Latest versions of Mingw-w64
now provide actual functions for localtime_r/gmtime_r, but
with a twist that you have to include unistd.h or pthread.h
before including time.h. By luck some files in QEMU have
such an include order, resulting in compile errors:
CC util/osdep.o
In file included from include/qemu-common.h:48:0,
from util/osdep.c:48:
include/sysemu/os-win32.h:77:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls]
struct tm *gmtime_r(const time_t *timep, struct tm *result);
^
In file included from include/qemu-common.h:35:0,
from util/osdep.c:48:
/usr/i686-w64-mingw32/sys-root/mingw/include/time.h:272:107: note: previous definition of 'gmtime_r' was here
In file included from include/qemu-common.h:48:0,
from util/osdep.c:48:
include/sysemu/os-win32.h:79:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls]
struct tm *localtime_r(const time_t *timep, struct tm *result);
^
In file included from include/qemu-common.h:35:0,
from util/osdep.c:48:
/usr/i686-w64-mingw32/sys-root/mingw/include/time.h:269:107: note: previous definition of 'localtime_r' was here
This change adds a configure test to see if localtime_r
exits, and only enables the QEMU impl if missing. We also
re-arrange qemu-common.h try attempt to guarantee that all
source files get unistd.h before time.h and thus see the
localtime_r/gmtime_r defs.
[sw: Use "official" spellings for Mingw-w64, MinGW in comments.]
[sw: Terminate sentences with a dot in comments.]
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
libcacard is now a standalone project hosted with the Spice project (see
the 2.5.0 release announcement), remove it from qemu tree.
Use the library if found during configure or if --enable-smartcard.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Add related configuration and make files for tilegx.
The target can now build, though not run anything.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP1588E5A03AD5E94B07E988B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Switch VNC server over to using the QCryptoTLSSession object
for the TLS session. This removes the direct use of gnutls
from the VNC server code. It also removes most knowledge
about TLS certificate handling from the VNC server code.
This has the nice effect that all the CONFIG_VNC_TLS
conditionals go away and the user gets an actual error
message when requesting TLS instead of it being silently
ignored.
With this change, the existing configuration options for
enabling TLS with -vnc are deprecated.
Old syntax for anon-DH credentials:
-vnc hostname:0,tls
New syntax:
-object tls-creds-anon,id=tls0,endpoint=server \
-vnc hostname:0,tls-creds=tls0
Old syntax for x509 credentials, no client certs:
-vnc hostname:0,tls,x509=/path/to/certs
New syntax:
-object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=no \
-vnc hostname:0,tls-creds=tls0
Old syntax for x509 credentials, requiring client certs:
-vnc hostname:0,tls,x509verify=/path/to/certs
New syntax:
-object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=yes \
-vnc hostname:0,tls-creds=tls0
This aligns VNC with the way TLS credentials are to be
configured in the future for chardev, nbd and migration
backends. It also has the benefit that the same TLS
credentials can be shared across multiple VNC server
instances, if desired.
If someone uses the deprecated syntax, it will internally
result in the creation of a 'tls-creds' object with an ID
based on the VNC server ID. This allows backwards compat
with the CLI syntax, while still deleting all the original
TLS code from the VNC server.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the administrator incorrectly sets up their x509 certificates,
the errors seen at runtime during connection attempts are very
obscure and difficult to diagnose. This has been a particular
problem for people using openssl to generate their certificates
instead of the gnutls certtool, because the openssl tools don't
turn on the various x509 extensions that gnutls expects to be
present by default.
This change thus adds support in the TLS credentials object to
sanity check the certificates when QEMU first loads them. This
gives the administrator immediate feedback for the majority of
common configuration mistakes, reducing the pain involved in
setting up TLS. The code is derived from equivalent code that
has been part of libvirt's TLS support and has been seen to be
valuable in assisting admins.
It is possible to disable the sanity checking, however, via
the new 'sanity-check' property on the tls-creds object type,
with a value of 'no'.
Unit tests are included in this change to verify the correctness
of the sanity checking code in all the key scenarios it is
intended to cope with. As part of the test suite, the pkix_asn1_tab.c
from gnutls is imported. This file is intentionally copied from the
(long since obsolete) gnutls 1.6.3 source tree, since that version
was still under GPLv2+, rather than the GPLv3+ of gnutls >= 2.0.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
=nB06
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (44 commits)
cutils: work around platform differences in strto{l,ul,ll,ull}
cpu-exec: fix lock hierarchy for user-mode emulation
exec: make mmap_lock/mmap_unlock globally available
tcg: comment on which functions have to be called with mmap_lock held
tcg: add memory barriers in page_find_alloc accesses
remove unused spinlock.
replace spinlock by QemuMutex.
cpus: remove tcg_halt_cond and tcg_cpu_thread globals
cpus: protect work list with work_mutex
scripts/dump-guest-memory.py: fix after RAMBlock change
configure: Add support for jemalloc
add macro file for coccinelle
configure: factor out adding disas configure
vhost-scsi: fix wrong vhost-scsi firmware path
checkpatch: remove tests that are not relevant outside the kernel
checkpatch: adapt some tests to QEMU
CODING_STYLE: update mixed declaration rules
qmp: Add example usage of strto*l() qemu wrapper
cutils: Add qemu_strtoull() wrapper
cutils: Add qemu_strtoll() wrapper
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In Xen 4.6 commit cd2f100f0f61b3f333d52d1737dd73f02daee592
"libxc: Fix do_memory_op to return negative value on errors"
made the libxc API less odd-ball: On errors, return value is
-1 and error code is in errno. On success the return value
is either 0 or an positive value.
Since we could be running with an old toolstack in which the
Exx value is in rc or the newer, we add an wrapper around
the xc_domain_add_to_physmap (called xen_xc_domain_add_to_physmap)
which will always return the EXX.
Xen 4.6 did not change the libxc functions mentioned (same parameters)
so we piggyback on the fact that Xen 4.6 has a new function:
commit 504ed2053362381ac01b98db9313454488b7db40 "tools/libxc: Expose
new hypercall xc_reserved_device_memory_map" and check for that.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The number of slots per page being 511 (i.e. not a power of two) means
that the (32-bit) read and write indexes going beyond 2^32 will likely
disturb operation. The hypervisor side gets I/O req server creation
extended so we can indicate that we're using suitable atomic accesses
where needed, allowing it to atomically canonicalize both pointers when
both have gone through at least one cycle.
The Xen side counterpart (which is not a functional prereq to this
change, albeit a build one) went in already (commit b7007bc6f9).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking
to jemalloc memory allocator.
We have already tcmalloc support,
but it seem to not working well with a lot of iothreads/disks.
The main problem is that tcmalloc use a shared thread cache of 16MB
by default.
With more threads, this cache is shared, and some bad garbage collections
can occur if the cache is too low.
It's possible to tcmalloc cache increase it with a env var:
TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB
With default 16MB, performances are really bad with more than 2 disks.
Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads.
Jemalloc don't have performance problem with default configuration.
Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32,
with rbd block backend (librbd is doing a lot of memory allocation),
1 iothread by disk
glibc malloc
------------
1 disk 29052
2 disks 55878
4 disks 127899
8 disks 240566
15 disks 269976
jemalloc
--------
1 disk 41278
2 disks 75781
4 disks 195351
8 disks 294241
15 disks 298199
tcmalloc 2.2.1 default 16M cache
--------------------------------
1 disk 37911
2 disks 67698
4 disks 41076
8 disks 43312
15 disks 37569
tcmalloc : 256M cache
---------------------------
1 disk 33914
2 disks 58839
4 disks 148205
8 disks 213298
15 disks 218383
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Every arch adds its disas configury to both its own config as well
config_disas_all. Make a small function do to both at once.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <1440844439-19391-1-git-send-email-crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's support reading and writing of control registers for kvm and tcg.
We have to take care of flushing the tlb (tcg) and pushing the changed
registers into kvm.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently VSS dll/tlb files for use in w32 builds are only built as a
result of having been added to the general 'tools' target alongside
qemu-ga. This is fine for default make target, but if we build
qemu-ga directly via `make qemu-ga.exe`, the VSS files are not
created.
Fix this by moving the VSS dependencies to qemu-ga.exe directly.
With this move we can move the VSS files back out of 'tools',
and drop the extra handling from MSI target in Makefile.
Now we can build qemu-ga MSI package with:
./configure ...
make qemu-ga.exe
make msi
or simply:
./configure ...
make msi
and no longer need to do a full build beforehand.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently, if we don't explicitly disable support for MSI installer
via --disable-guest-agent-msi, the configure variable that tracks
the flag, 'guest_agent_msi', never gets set unless one of the probes
fails. Subsequent code then treats this unset value the same as if it
were a "yes" value (via != "no" style checks).
Instead, set the default "yes" value explicitly after the probes, then
make subsequent code expect the values to be set.
This makes it easier to report on whether or not MSI support was
enabled via probe by looking at the ./configure summary.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
MSI probe assumes that qemu-ga support has been probed already, but in
cases where --enable-guest-agent/--disable-guest-agent have not been
passed to configure, qemu-ga support may end up getting enabled later,
as is the case with w32 builds. This leads to MSI probe prematurely
reporting error due to lack of qemu-ga support.
Fix this by moving MSI installer probe after the final qga probes.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Use NetUserSetInfo() to set the user password.
This function is notoriously known to be problematic for users with EFS
encrypted files. But the alternative, NetUserChangePassword() requires
the old password. Nevertheless, The EFS file should be recovered by
changing back to the old password.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently we need to examine config-host.mak to determine whether
options/probes for MSI package generation had desired result. Report
this more prominently in ./configure summary as we do with other
guest agent configure options.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
All tcg host architectures now support the guest base and as
there is no real performance lost, it can be always enabled.
Anyway, guest base use can be disabled lively by setting guest
base to 0.
CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY),
it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY
parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to
use !CONFIG_SOFTMMU instead.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The cocoa GUI frontend assumes it is the only GUI (it redefines
main() so it always gets control before the rest of QEMU), so
it does not play well with other UIs like SDL or GTK. (Mostly
people building QEMU on OSX don't have the necessary dependencies
available for configure to build those other front ends, so
mostly this problem goes unnoticed.)
Make configure automatically disable the SDL and GTK front ends
if the cocoa front end is enabled. (We were sort of attempting
to do this for SDL before, but not in a way that worked very well.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 1439565052-3457-1-git-send-email-peter.maydell@linaro.org
* vhost-scsi fix from Igor and Lu Lina
* a build system fix from Daniel
* two more multi-arch-related patches from Peter C.
* TCG patches from myself and Sergey Fedorov
* RCU improvement from Wen Congyang
* a few more simple cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVzmCgAAoJEL/70l94x66DhFgH/1m3iGac2Ks3vAUAdS2HBcxC
EeziMwWFmkrfbtzUkz/jE0NG5uA2Bs8OFHsC8vmQFwkpDbGUlJ1zd5/N5UOHMG3d
zF0vd+nKNw9C1Fo0/LPyQSeP64/xXEMTmFLqmYf4ZOowz8lr/m6WYrMIzKUoXSEn
FeRtq78moDT8qwF372j8aoQUUpsctXDHBQHORZdcERvlc4mxojeJ3+mNViR2bv3r
92PwGvrJ26mQXEKmGo5O1VM4k7QVg7xJQfgE11x7ShE2E9fJDMgts0Q/xCjWCLwS
BXtEtbd9QeFEfG/mlRFevGtuvksq98m0hN7lAWb13zWmlJFuLyyMmlGfGAlU55Q=
=Y2DB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* SCSI fixes from Stefan and Fam
* vhost-scsi fix from Igor and Lu Lina
* a build system fix from Daniel
* two more multi-arch-related patches from Peter C.
* TCG patches from myself and Sergey Fedorov
* RCU improvement from Wen Congyang
* a few more simple cleanups
# gpg: Signature made Fri 14 Aug 2015 22:41:52 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
disas: Defeature print_target_address
hw: fix mask for ColdFire UART command register
scsi-generic: identify AIO callbacks more clearly
scsi-disk: identify AIO callbacks more clearly
scsi: create restart bottom half in the right AioContext
configure: only add CONFIG_RDMA to config-host.h once
qemu-nbd: remove unnecessary qemu_notify_event()
vhost-scsi: Clarify vhost_virtqueue_mask argument
exec: use macro ROUND_UP for alignment
rcu: Allow calling rcu_(un)register_thread() during synchronize_rcu()
exec: drop cpu_can_do_io, just read cpu->can_do_io
cpu_defs: Simplify CPUTLB padding logic
cpu-exec: Do not invalidate original TB in cpu_exec_nocache()
vhost/scsi: call vhost_dev_cleanup() at unrealize() time
virtio-scsi-test: Add test case for tail unaligned WRITE SAME
scsi-disk: Fix assertion failure on WRITE SAME
tests: virtio-scsi: clear unit attention after reset
scsi-disk: fix cmd.mode field typo
virtio-scsi: use virtqueue_map_sg() when loading requests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For unknown reasons (probably a git rebase merge mistake)
commit 2da776db48
Author: Michael R. Hines <mrhines@us.ibm.com>
Date: Mon Jul 22 10:01:54 2013 -0400
rdma: core logic
Adds CONFIG_RDMA to config-host.h twice, as can be seen
in the generated file:
$ grep CONFIG_RDMA config-host.h
#define CONFIG_RDMA 1
#define CONFIG_RDMA 1
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1438345403-32467-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 8e9b0d2 (ui: convert VNC websockets to use crypto APIs) dropped
the --enable-vnc-ws option but forgot to update the help text. Fix this.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1437749257-3313-1-git-send-email-afaerber@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unfortunately Ubuntu's pkg-config information for gnutls is broken
for the static linking case, and outputs --libs options which the
compiler does not recognize. Work around this problem by testing
that the --cflags/--libs output will at least allow compilation
before enabling gnutls support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1437758888-22486-1-git-send-email-peter.maydell@linaro.org
In nettle 3, cbc_encrypt() accepts 'nettle_cipher_func' instead of
'nettle_crypt_func' and these two differ in 'const' qualifier of the
first argument. The build fails with:
In file included from crypto/cipher.c:71:0:
./crypto/cipher-nettle.c: In function ‘qcrypto_cipher_encrypt’:
./crypto/cipher-nettle.c:154:38: error: passing argument 2 of
‘nettle_cbc_encrypt’ from incompatible pointer type
cbc_encrypt(ctx->ctx_encrypt, ctx->alg_encrypt,
^
In file included from ./crypto/cipher-nettle.c:24:0,
from crypto/cipher.c:71:
/usr/include/nettle/cbc.h:48:1: note: expected
‘void (*)(const void *, size_t, uint8_t *, const uint8_t *)
but argument is of type
‘void (*)( void *, size_t, uint8_t *, const uint8_t *)
To allow both versions, we switch to the new definition and #if typedef
it for old versions.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Message-Id: <1436548682-9315-2-git-send-email-rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVnQWdAAoJEL/70l94x66D6OgIAKJlzQfmy5w7Q9WD4vCMhD76
JrpLSsn7Gx/Bws0Nu9nLQlqun5z4hiUxyG2kP/WqD9+tV3cpSMSyrG6ImVdqKnQ5
+Z8WJZuREkQv0aqDUjQVST+eIDZuh2LWJXAjhgsCXUHY77eWb/7WmKT79xJOa+5C
5xB1qxudqX5IsTvpiKKPbmUGYkAcvRX1dUSaFwRIMO0UyKn59B9WfM9a5slIbLW7
XfI8+wEJshTVLuQkkTfdidWQc5M5DwlmO7ESUNR/BRPCPFeyjcDqgQY5pBM5XVo9
C+S0R3zIt3Ew0fhCtLRyjlIT0bGfwjbU5HRiHcyldBKhNUZZjSUoOWJnYRHXUDY=
=H8wA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Bugfixes and Daniel Berrange's crypto library.
# gpg: Signature made Wed Jul 8 12:12:29 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
ossaudio: fix memory leak
ui: convert VNC to use generic cipher API
block: convert qcow/qcow2 to use generic cipher API
ui: convert VNC websockets to use crypto APIs
block: convert quorum blockdrv to use crypto APIs
crypto: add a nettle cipher implementation
crypto: add a gcrypt cipher implementation
crypto: introduce generic cipher API & built-in implementation
crypto: move built-in D3DES implementation into crypto/
crypto: move built-in AES implementation into crypto/
crypto: introduce new module for computing hash digests
vl: move rom_load_all after machine init done
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the direct use of gnutls for hash processing in the
websockets code, in favour of using the crypto APIs. This
allows the websockets code to be built unconditionally
removing countless conditional checks from the VNC code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-9-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Get rid of direct use of gnutls APIs in quorum blockdrv in
favour of using the crypto APIs. This avoids the need to
do conditional compilation of the quorum driver. It can
simply report an error at file open file instead if the
required hash algorithm isn't supported by QEMU.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-8-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we are linking to gnutls already and gnutls is built against
nettle, then we should use nettle as a cipher backend in
preference to our built-in backend.
This will be used when linking against some GNUTLS 2.x versions
and all GNUTLS 3.x versions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-7-git-send-email-berrange@redhat.com>
[Change "#elif" to "#elif defined". - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we are linking to gnutls already and gnutls is built against
gcrypt, then we should use gcrypt as a cipher backend in
preference to our built-in backend.
This will be used when linking against GNUTLS 1.x and many
GNUTLS 2.x versions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-6-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PCIAddress inforfation is obtained via SetupApi, which provides the
information about address, bus, etc. We look throught entire device tree
in the system and try to find device object for given volume. For this PDO
SetupDiGetDeviceRegistryProperty is called, which reads PCI configuration
for a given devicei if it is possible.
This is the most convinient way for a userspace service. The lookup is
performed for every volume available. However, this information is
not mandatory for vss-provider.
In order to use SetupApi we need to notify linker about it. We do not need
to install additional libs, so we do not make separate configuration
option to use libsetupapi.su
SetupApi gives as the same information as kernel driver
with IRP_MN_QUERY_INTERFACE.
https://support.microsoft.com/en-us/kb/253232
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* stub out get_pci_info if !CONFIG_QGA_NTDDSCSI
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This header file provides w32 ioctl definitions for working with disk
devices. Older versions of mingw do not expose this in a useable way,
so add a configure check and report it via CONFIG_QGA_NTDDSCSI.
Subsequent patches will use this macro to stub out functionality that
relies on this in cases where it's not available.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add the iphlpapi library to use APIs such as GetAdaptersInfo and
GetAdaptersAddresses.
Signed-off-by: Kirk Allan <kallan@suse.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Introduce a new crypto/ directory that will (eventually) contain
all the cryptographic related code. This initially defines a
wrapper for initializing gnutls and for computing hashes with
gnutls. The former ensures that gnutls is guaranteed to be
initialized exactly once in QEMU regardless of CLI args. The
block quorum code currently fails to initialize gnutls so it
only works by luck, if VNC server TLS is not requested. The
hash APIs avoids the need to litter the rest of the code with
preprocessor checks and simplifies callers by allocating the
correct amount of memory for the requested hash.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Almost exclusively bugfixes, though in this case,
we are adding functionality to the pxb in order
to make OVMF work on it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVjVb/AAoJECgfDbjSjVRpeaEH/2bwK7BGgczEQ7fhzIEaQSQq
SV7aychNZvUFASXLV6aVmQCdYixZxlI9KDn0pMRYntUcjxRRB48U3N5Sy4km46Pw
LLN3vxGzHazlE7AJ5c+WVDf0e2k7v3CpZ/TKXzPHmvZXIuBfjKXtKzBgyQYxGkmL
JgRrRSHDrsbvfmhI4uHMpCTYs/WeY1cuA1IzvimBjmvVP5kkko4NoX+HEWmGJ6WK
13fQuV+Cvz7Yk40HRpPAM0QPV2etGCj+dU7xgF9BWnn9mzbGC5iy8EUClyGil/af
k3i/bCxs6IgpQ76LaezJtGPtn1jbohrO4qRqlatUAJCwgCYMCkxkIk+Pr4A3x4c=
=6WvB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci fixes, enhancements
Almost exclusively bugfixes, though in this case,
we are adding functionality to the pxb in order
to make OVMF work on it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri Jun 26 14:43:27 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
Fix glib_subprocess test
hw/pci-bridge: format special OFW unit address for PXB host
hw/core: explicit OFW unit address callback for SysBusDeviceClass
hw/pci-bridge: disable SHPC in PXB
hw/pci-bridge: introduce "shpc" property
hw/pci: introduce shpc_present() helper function
hw/pci-bridge: add macro for "msi" property
hw/pci-bridge: add macro for "chassis_nr" property
hw/pci-bridge: expose _test parameter in SHPC_VMSTATE()
migration: introduce VMSTATE_BUFFER_UNSAFE_INFO_TEST()
add pci-bridge-seat
pc: cleanup and convert TMP ACPI device description to AML API
MAINTAINERS: add ACPI entry
vhost: correctly pass error to caller in vhost_dev_enable_notifiers()
balloon: add a feature bit to let Guest OS deflate balloon on oom
qdev: fix OVERFLOW_BEFORE_WIDEN
virito-pci: fix OVERRUN problem
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A typo means that the tests dependent on glib with subprocess
support are never run.
Fixes: 9d41401b90
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is an attempt to rearrange configure --help output a bit
and consolidate pairs of --enable/disable into its own section.
After this, help text is easier to sort, manage and read.
More descriptive text can be added as well, since we now have
more space.
While at it, mention en/dis-able-vte.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The help text says --extra-ldflags is appended to LDFLAGS so make it so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
New options were added to enable Windows MSI installation package
creation:
Option --enable-guest-agent-msi, like the name suggests, enables building
Windows MSI package for QEMU guest agent; option --disable-guest-agent-msi
disables MSI package creation; by default, no MSI package is created
Signed-off-by: Yossi Hindin <yhindin@redhat.com>
Message-Id: <1430913460-13174-5-git-send-email-yhindin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DirectSound should be a superior choice on Windows.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ESD is no longer developed and replaced by PulseAudio.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some recent patches require a function from libfdt version 1.4.0,
so we should check for this version during the configure step
already. Unfortunately, there does not seem to be a proper #define
for the version number in the libfdt headers. So alternatively,
we check for the availability of the required function
fdt_get_property_by_offset() instead instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
It makes sense that extra-cflags should be appended after the normal
CFLAGS so they don't get overridden by default behaviour. This way if
you specify something like:
./configure --extra-cflags="-O0"
You will see the requested behaviour.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
libepoxy does the opengl extension handling for us.
It also is helpful for trouble-shooting as it prints nice error messages
instead of silently failing or segfaulting in case we do something
wrong, like using gl commands not supported by the current context.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
gdb allows registers to be displayed/modified, and is being updated
to account for the new vector registers. Mirror these changes in
the gdb stub in qemu so that this can be performed when gdb is
attached to the qemu gdbserver.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This provides g_ptr_array_new_with_free_func, as well as a few
other functions that we've been hacking around in glib-compat.h.
Cleaning up the compatibility headers will come later.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1431469140-22208-2-git-send-email-jsnow@redhat.com
Test if ccache is interfering with semantic analysis of macros,
disable its habit of trying to compile already pre-processed
versions of code if so. ccache attempts to save time by compiling
pre-processed versions of code, but this disturbs clang's static
analysis enough to produce false positives.
ccache allows us to disable this feature, opting instead to
compile the original version instead of its preprocessed version.
This makes ccache much slower for cache misses, but at least it
becomes usable with QEMU/clang.
This workaround only activates for users using ccache AND clang,
and only if their configuration is observed to be producing warnings.
You may need to clear your ccache for builds started without -Werror,
as those may continue to produce warnings from the cache.
Thanks to Peter Eisentraut for his writeup on the issue:
http://peter.eisentraut.org/blog/2014/12/01/ccache-and-clang-part-3/
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427324259-1481-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The glib headers use GCC attributes. Unfortunately the __GNUC__ and
__GNUC_MINOR__ version macros are also defined by clang, but clang
doesn't support the same attributes as GCC.
clang 3.5.0 does not support the __alloc_size__ attribute:
c047507a9a
The following warning is produced:
gstrfuncs.h:257:44: warning: unknown attribute '__alloc_size__' ignored [-Wunknown-attributes]
G_GNUC_MALLOC G_GNUC_ALLOC_SIZE(2);
gmacros.h:67:45: note: expanded from macro 'G_GNUC_ALLOC_SIZE'
#define G_GNUC_ALLOC_SIZE(x) __attribute__((__alloc_size__(x)))
This patch checks whether glib headers cause warnings and disables
-Wunknown-attributes if it is able to.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427324259-1481-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Factor out the function that checks if a compiler
flag is supported or not.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427324259-1481-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
gcc 4.9.2 treats -nopie as an error:
cc: error: unrecognized command line option ‘-nopie’
clang 3.5.0 treats -nopie as a warning:
clang: warning: argument unused during compilation: '-nopie'
The causes ./configure to fail with clang:
ERROR: configure test passed without -Werror but failed with -Werror.
Make the -nopie test use -Werror so that compile_prog works for both gcc
and clang.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427324259-1481-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- two improvements to "info mtere" from Gerd
- KVM support for memory transaction attributes
- one more small step towards unlocked MMIO dispatch
- one piece of the qemu-nbd errno fixes
- trivial-ish patches from Denis and Thomas
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVTLBhAAoJEL/70l94x66DkGIH/jlNJBMBGhlH/lwb1LzxtAMX
OxyDxsiwJpSxsOiZiY3oRz7d6VV6TCrmx5L+1HgG5IzU3WC61Tq6/FK4EXLepZIH
GSYlLtAALWny+2Uwsyh1Z7MMr5yxyhgeORk/l7O8pncmMeysludbEaJqQg8Aa9A2
j0B2pv4tvcl/qhuIFXL1YlbYMVXMsZy5W65D8jq+B6qf3q8kUcdKvgvbUMrxAiSH
JMISo4Z32t9w8SGnhlBa9s4HfN2yOvULRAozzkDBAu4c41cZrw16lvTV8XotamnU
LrG6eQ+2PFeIrcGhuIu7z5Bi4yiRRiThfRLCAvVApVTQYUf7IwvPNa5K1FrP9YU=
=Z/UD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- build bugfix from Fam and new configure check from Emilio
- two improvements to "info mtere" from Gerd
- KVM support for memory transaction attributes
- one more small step towards unlocked MMIO dispatch
- one piece of the qemu-nbd errno fixes
- trivial-ish patches from Denis and Thomas
# gpg: Signature made Fri May 8 13:47:29 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
qemu-nbd: only send a limited number of errno codes on the wire
rules.mak: Force CFLAGS for all objects in DSO
configure: require __thread support
exec: move rcu_read_lock/unlock to address_space_translate callers
kvm: add support for memory transaction attributes
mtree: also print disabled regions
mtree: tag & indent a bit better
apic_common: improve readability of apic_reset_common
kvm: Silence warning from valgrind
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The codebase doesn't build without __thread support.
Formalise this requirement by adding a check for it in the
configure script.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
tricore was out of alphabetical order in the target list. Fix.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This adds "--enable-tcmalloc" and "--disable-tcmalloc" to allow linking
to libtcmalloc from gperftools.
tcmalloc is a malloc implementation that works well with threads and is
fast, so it is good for performance.
It is disabled by default, because the MALLOC_PERTURB_ flag we use in
tests doesn't work with tcmalloc. However we can enable tcmalloc
specific heap checker and profilers later.
An IOPS gain can be observed with virtio-blk-dataplane, other parts of
QEMU will directly benefit from it as well:
==========================================================
glibc malloc
----------------------------------------------------------
rw bs iodepth bw iops latency
read 4k 1 150 38511 24
----------------------------------------------------------
==========================================================
tcmalloc
----------------------------------------------------------
rw bs iodepth bw iops latency
read 4k 1 156 39969 23
----------------------------------------------------------
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1427338992-27057-1-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unfortunately it turns out that libseccomp 2.2 still does not work
correctly on non-x86 architectures; return to the previous configure
setup of insisting on libseccomp 2.1 or better and i386/x86_64 and
disabling seccomp support in all other situations.
This reverts the two commits:
* "seccomp: libseccomp version varying according to arch"
(commit 896848f0d3)
* "seccomp: update libseccomp version and remove arch restriction"
(commit 8e27fc2004)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1428670681-23032-1-git-send-email-peter.maydell@linaro.org
libxseg has changed license to GPLv3. QEMU includes GPL "v2 only" code
which is not compatible with GPLv3. This means the resulting binaries
may not be redistributable!
Disable Archipelago (libxseg) by default to prevent accidental license
violations. Also warn if linking against libxseg is enabled to remind
the user.
Note that this commit does not constitute any advice about software
licensing. If you have doubts you should consult a lawyer.
Cc: Chrysostomos Nanakos <cnanakos@grnet.gr>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1428587538-8765-1-git-send-email-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Libseccomp dependency was mandating version 2.2.0 on all architectures
and this was causing configure and virt-test to break on non-updates
distros. This patch works-around it and give a more flexible way to
check the version, giving more time for other distros to update
libseccomp version.
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Reported-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Juan Quintela <quintela@redhat.com>
Message-id: 1427385385-30571-1-git-send-email-eduardo.otubo@profitbricks.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Libseccomp version updated to 2.2.0 and arch restriction to x86/x86_64
is now removed. It's supposed to work on armv7l as well.
Related bug: https://bugs.launchpad.net/qemu/+bug/1363641
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Here's a trivial change to enable kvm on x32 architecture.
I'm not 100% sure the result works correctly in all cases,
but this is a good start and in theory everything should
work.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Re-add the glx compile test to configure. We can't use pkg-config to
probe for glx, and as long as milkymist-tmu2 privately uses glx (due to
opengl infrastructure in qemu not being ready yet) we must continue to
test for glx to avoid build failures.
Reported-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Rename config option from "glx" to "opengl", glx will not be the only
option for opengl in near future. Also switch over to pkg-config for
opengl support detection.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This patch adds support for bzip2-compressed block entries as introduced
with OS X 10.4 (source: https://en.wikipedia.org/wiki/Apple_Disk_Image).
It was tested against a 5.2G "OS X Yosemite" installation image which
stores the BLXX block in the XML property list (instead of resource
forks) and has over 5k chunks.
New configure entries are added (--enable-bzip2 / --disable-bzip2) to
control inclusion of bzip2 functionality (which requires linking against
libbz2). The help message suggests that this option is needed for DMG
files, but the tests are generic enough that other parts of QEMU can use
bzip2 if needed.
The identifiers are based on http://newosxbook.com/DMG.html.
The decompression routines are based on the zlib case, but as there is
no way to reset the decompression state (unlike zlib), memory is
allocated and deallocated for every decompression. This should not be
problematic as the decompression takes most of the time and as blocks
are typically about/over 1 MiB in size, only one allocation is done
every 2000 sectors.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1420566495-13284-12-git-send-email-peter@lekensteyn.nl
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This efficiently writes zeroes on Linux if the kernel is capable enough.
FALLOC_FL_ZERO_RANGE correctly handles all cases, including and not
including file expansion.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Fam Zheng <famz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
rules.mak has a rule for .S files using CPP. This will result in
errors like
CPP s390-ccw/start.asm
cc: error: unrecognized command line option '-Wbitwise'
Lets also redefine CPP in case of --enable-sparse.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ioreq-server API added to Xen 4.5 offers better security than
the existing Xen/QEMU interface because the shared pages that are
used to pass emulation request/results back and forth are removed
from the guest's memory space before any requests are serviced.
This prevents the guest from mapping these pages (they are in a
well known location) and attempting to attack QEMU by synthesizing
its own request structures. Hence, this patch modifies configure
to detect whether the API is available, and adds the necessary
code to use the API if it is.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Using "has" is more slick because which(1) is not always there.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Current stable version of libseccomp (2.1.1) only supports i386 and
x86_64 archs correctly. This patch limits the usage of the syscall
filter for those archs and updates to the correct last version of
libseccomp.
This patch also fixes the bug:
https://bugs.launchpad.net/qemu/+bug/1363641
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Moore <pmoore@redhat.com>
c++ compiler isn't wrapped with cgcc, resulting in gcc complaining about
the sparse compiler flags which it doesn't know in case qemu is built
with --enable-sparse.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Other packages may provide includes for pixman as well if the host has a
devel package installed. So add ours to the front to unsure that the
right version is used.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The qemu-aarch64 and qemu-system-aarch64 binaries include support
for all the 32 bit ARM CPUs as well as the 64 bit ones. This means
we need to build in the GDB XML files for the 32 bit CPUs too.
Otherwise gdb will complain:
warning: while parsing target description (at line 1): Could not load XML document "arm-core.xml"
when you try to connect to our gdbserver to debug a 32 bit CPU
running in a qemu-aarch64 or qemu-system-aarch64 binary.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1410533739-13836-1-git-send-email-peter.maydell@linaro.org
Check for the presence of posix_fallocate() in configure and only
compile in support for PREALLOC_MODE_FALLOC when it's there.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
kvmclock fix. This was reverted last minute for 2.1, but it is now back
with the problematic case fixed.
Note: I will soon switch to a subkey for signing purposes. To verify
future signed pull requests from me, please update my key with
"gpg --recv-keys 9B4D86F2". You should see 3 new subkeys---the
one for signing will be a 2048-bit RSA key, 4E6B09D7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=nP/e
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Usual mix of patches, the most important being Alex and Marcelo's
kvmclock fix. This was reverted last minute for 2.1, but it is now back
with the problematic case fixed.
Note: I will soon switch to a subkey for signing purposes. To verify
future signed pull requests from me, please update my key with
"gpg --recv-keys 9B4D86F2". You should see 3 new subkeys---the
one for signing will be a 2048-bit RSA key, 4E6B09D7.
# gpg: Signature made Fri 26 Sep 2014 15:34:44 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
kvm/valgrind: don't mark memory as initialized
po: fix conflict with %.mo rule in rules.mak
kvmvapic: fix migration when VM paused and when not running Windows
serial: check if backed by a physical serial port at realize time
serial: reset state at startup
target-i386: update fp status fix
hw/dma/i8257: Silence phony error message
kvmclock: Ensure time in migration never goes backward
kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation
Introduce cpu_clean_all_dirty
pit: fix pit interrupt can't inject into vm after migration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
since commit 7dda5dc82a ("migration: initialize RAM to zero") the
guest memory is defined zero. No need to call valgrind on guest memory.
This reverts commit 62fe83318d ("qemu: Use valgrind annotations to
mark kvm guest memory as defined") thus speeding up kvm start if
<includedir>/valgrind/valgrind.h is available.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dataplane doesn't depend on linux-aio any more, so we don't need the
compiling condition now.
Configure options are kept but just print a message.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1410329871-28885-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make them consistent with the others.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit c261d774fb added one more binutils
tool: nm also needs a cross prefix.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1411070108-8954-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A bunch of bugfixes - some of these will make sense for 2.1.2
I put Cc: qemu-stable included where appropriate.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUGyniAAoJECgfDbjSjVRpxg0H/j4jSEWHm/4uKSly6W4MXxhN
LghE5iAaO3awU88RiRPW/m/g6sagD9RuQAHteHkvyZ6py/li0IFvLtl66OczeSgc
rnM2n9MeYfi5Q05T+ygjqYY2ynosYhrI4iPmsnKqbqLi+WWwQHFKuYKNcNmQjmJu
Sg4KDz+W4p5j/pMUZdgf4lse3PaLXoMy4IA1HC8U1WmwvyNLZrPRTXhFn1hFbxU6
Rf604wz6gkAFvwizt2SoRMOIF4w0meCKemY1wqcwOeDWqP6Bj76RnRCrVR06AgnX
ngVsrP5SrWymqwFUP9ZpeNdBOQSxXE3zT1cE6JU3/KUvTBs6Eur4Dnz7g2mPb8I=
=nHHz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio, misc bugfixes
A bunch of bugfixes - some of these will make sense for 2.1.2
I put Cc: qemu-stable included where appropriate.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 18 Sep 2014 19:52:18 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
pc: leave more space for BIOS allocations
virtio-pci: fix migration for pci bus master
vhost-user: fix VIRTIO_NET_F_MRG_RXBUF negotiation
virtio-pci: enable bus master for old guests
Revert "virtio: don't call device on !vm_running"
virtio-net: drop assert on vm stop
Revert "rng-egd: remove redundant free"
qdev: Move global validation to a single function
qdev: Rename qdev_prop_check_global() to qdev_prop_check_globals()
test-qdev-global-props: Test handling of hotpluggable and non-device types
test-qdev-global-props: Initialize not_used=true for all props
test-qdev-global-props: Run tests on subprocess
tests: disable global props test for old glib
test-qdev-global-props: Trivial comment fix
hw/machine: Free old values of string properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
follow-up patch moves global property tests to subprocesses.
Unfortunately with old glib this causes:
tests/test-qdev-global-props.c: In function
‘test_static_prop’:
tests/test-qdev-global-props.c:80:5: error: implicit
declaration of function ‘g_test_trap_subprocess’
[-Werror=implicit-function-declaration]
tests/test-qdev-global-props.c:80:5: error: nested extern
declaration of ‘g_test_trap_subprocess’ [-Werror=nested-externs]
This function was only added in glib 2.38, and our
minimum version is 2.12.
To fix, disable the test for glib < 2.38.
Apply before that patch to avoid breaking bisect.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit a93a3af9 introduces use of PIXMAN_TYPE_RGBA, but it's only available
in pixman >= 0.21.8. If pixman doesn't meet the version requirement, qemu
will fail to build with following message:
qemu/ui/qemu-pixman.c: In function ‘qemu_pixelformat_from_pixman’:
qemu/ui/qemu-pixman.c:42: error: ‘PIXMAN_TYPE_RGBA’ undeclared (first use in this function)
qemu/ui/qemu-pixman.c:42: error: (Each undeclared identifier is reported only once
qemu/ui/qemu-pixman.c:42: error: for each function it appears in.)
This patch fixes the problem by checking the pixman version.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add tcg and cpu model initialization.
Add gen_intermediate_code function.
Activate target in configure and add softmmu config.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-id: 1409572800-4116-5-git-send-email-kbastian@mail.uni-paderborn.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the relevant s390x feature xml files taken from gdb.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
commit 7537fe04 QMP: QMP/ -> docs/qmp/
Above commit has moved last QMP files to docs/qmp and it's not necessary
to create QMP directory. So remove it from configure.
Signed-off-by: Liming Wang <liming.wang@canonical.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add support for the setns and unshare syscalls, trivially passed through to
the host. Based on patches by Paul Burton, added configure check.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Adds support for the timerfd_create, timerfd_gettime & timerfd_settime
syscalls, allowing use of timerfds by target programs.
v2: By Riku - added configure check for timerfd and ifdefs
for benefit of old distributions like RHEL5.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=5w3j
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 15 Aug 2014 14:07:42 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (59 commits)
block: Catch !bs->drv in bdrv_check()
iotests: Add test for image header overlap
qcow2: Catch !*host_offset for data allocation
qcow2: Return useful error code in refcount_init()
mirror: Handle failure for potentially large allocations
vpc: Handle failure for potentially large allocations
vmdk: Handle failure for potentially large allocations
vhdx: Handle failure for potentially large allocations
vdi: Handle failure for potentially large allocations
rbd: Handle failure for potentially large allocations
raw-win32: Handle failure for potentially large allocations
raw-posix: Handle failure for potentially large allocations
qed: Handle failure for potentially large allocations
qcow2: Handle failure for potentially large allocations
qcow1: Handle failure for potentially large allocations
parallels: Handle failure for potentially large allocations
nfs: Handle failure for potentially large allocations
iscsi: Handle failure for potentially large allocations
dmg: Handle failure for potentially large allocations
curl: Handle failure for potentially large allocations
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
VM Image on Archipelago volume is specified like this:
file.driver=archipelago,file.volume=<volumename>[,file.mport=<mapperd_port>[,
file.vport=<vlmcd_port>][,file.segment=<segment_name>]]
'archipelago' is the protocol.
'mport' is the port number on which mapperd is listening. This is optional
and if not specified, QEMU will make Archipelago to use the default port.
'vport' is the port number on which vlmcd is listening. This is optional
and if not specified, QEMU will make Archipelago to use the default port.
'segment' is the name of the shared memory segment Archipelago stack is using.
This is optional and if not specified, QEMU will make Archipelago to use the
default value, 'archipelago'.
Examples:
file.driver=archipelago,file.volume=my_vm_volume
file.driver=archipelago,file.volume=my_vm_volume,file.mport=123
file.driver=archipelago,file.volume=my_vm_volume,file.mport=123,
file.vport=1234
file.driver=archipelago,file.volume=my_vm_volume,file.mport=123,
file.vport=1234,file.segment=my_segment
Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some non-linux systems, for example a system with
FreeBSD kernel and glibc, may declare struct mmsghdr
(in glibc) but may not have linux-specific header
file linux/ip.h. The actual implementation in qemu
includes this linux-specific header file unconditionally,
so compilation fails if it is not present. Include
this header in the configure test too.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If --enable-stack-protector is used is used, configure script try to use
--fstack-protector-strong. In case it's not supported, --fstack-protector-all
is enabled. If both protectors are not supported, configure does not use
any protector at all without any notification.
This patch reports error when user requests stack protector to be used and
both protector modes are not supported. Behavior is not changed in case
user do not use any of --enable-stack-protector/--disable-stack-protector.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
[Fix non-POSIX operator in test. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mmsghdr struct is only introduced in Linux 2.6.32; add a
configure check for it and disable L2TPV3 on hosts which are
too old to provide it, rather than simply failing to compile.
Reported-by: chenliang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1404219488-11196-1-git-send-email-arei.gonglei@huawei.com
[PMM: cleaned up commit message and corrected kernel version number]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The existing test whether "-lm" needs to be included or not is
insufficient as it reports false negative on Fedora20/ppc64.
This happens because sin(0.0) is a constant value which compiler
can safely throw away and therefore there is no need to add "-lm".
As the result, qemu-nbd/qemu-io/qemu-img tools cannot compile.
This adds a global variable and uses it in the test to prevent
from optimization.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[Use Peter's improvement on the test to fool LTO, and remove the
now useless -lm addition in Makefile.target. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to allow out-of-tree iotests, create a symlink for the check
script in the build tree.
While doing so, also write configured options relevant to the iotests to
common.env in the build tree; currently, this is the command to invoke
Python 2.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I don't see why tpm is disabled by default: it doesn't have any
external dependencies, or change default behavior. Leaving it disabled
is just going to cause it to bit rot.
Enable it by default, and add a --disable-tpm option.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The other tcg backends that support 32- and 64-bit modes
use the 32-bit name for the port. Follow suit.
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
* remotes/kvm/uq/master:
hw/mips: malta: Don't boot from flash with KVM T&E
MAINTAINERS: Add entry for MIPS KVM
target-mips: Enable KVM support in build system
hw/mips: malta: Add KVM support
hw/mips: In KVM mode, inject IRQ2 (I/O) interrupts via ioctls
target-mips: Call kvm_mips_reset_vcpu() from mips_cpu_reset()
target-mips: kvm: Add main KVM support for MIPS
kvm: Allow arch to set sigmask length
target-mips: get_physical_address: Add KVM awareness
target-mips: get_physical_address: Add defines for segment bases
hw/mips: Add API to convert KVM guest KSEG0 <-> GPA
hw/mips/cputimer: Don't start periodic timer in KVM mode
target-mips: Reset CPU timer consistently
KVM: Fix GSI number space limit
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
numa work by Hu Tao and others
memory hotplug by Igor
vhost-user by Nikolay, Antonios and others
guest virtio announcements by Jason
qtest fixes by Sergey
qdev hotplug fixes by Paolo
misc other fixes mostly by myself
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTowW+AAoJECgfDbjSjVRpnMMH/jp3sKGzJumYLbi5ihjmYyND
jYd6ySXoVAjUTgaCvdje5srisOap8pbc783kQvQS4CeWsjZ5Vvh+PZjkBPIqF1pD
celxGQ43CY7QSUWq+02Dg9VIUwLwZqdKlxNsV01FligQn+ZBQ6sQ6ksWx7oGzqRt
5/HMZykbwUvSk/4xGUaMn2+/4uhQ0Wz5EsCkv9L/u8kS72k6ldc/tCGZMzBUNHTM
rW5FPYwMQP0MXgGTXnlLEQjJ7Lozc66IaMZoHw/a/aGSIxdag9Otj0ADuXq6yZaV
Xi4O/EOJWd1JpSG7w8LOyIZNakpHkU43fmJCLzBjDAupHeRp57TcW5ox4PJYAtg=
=Oxdt
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio,hotplug fixes, enhancements
numa work by Hu Tao and others
memory hotplug by Igor
vhost-user by Nikolay, Antonios and others
guest virtio announcements by Jason
qtest fixes by Sergey
qdev hotplug fixes by Paolo
misc other fixes mostly by myself
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (109 commits)
numa: use RAM_ADDR_FMT with ram_addr_t
qapi/string-output-visitor: fix bugs
tests: simplify code
qapi: fix input visitor bugs
acpi: rephrase comment
qmp: add ACPI_DEVICE_OST event handling
qmp: add query-acpi-ospm-status command
acpi: implement ospm_status() method for PIIX4/ICH9_LPC devices
acpi: introduce TYPE_ACPI_DEVICE_IF interface
qmp: add query-memory-devices command
numa: handle mmaped memory allocation failure correctly
pc: acpi: do not hardcode preprocessor
qmp: clean out whitespace
qdev: recursively unrealize devices when unrealizing bus
qdev: reorganize error reporting in bus_set_realized
qapi: fix build on glib < 2.28
qapi: make string output visitor parse int list
qapi: make string input visitor parse int list
tests: fix memory leak in test of string input visitor
hmp: add info memdev
...
Conflicts:
include/hw/i386/pc.h
[PMM: fixed minor conflict in pc.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add detection of libnuma (mostly contained in the numactl package)
to the configure script. Can be enabled or disabled on the command
line, default is use if available.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The supplied chardev id will be inspected for supported options. Only
a socket backend, with a set path (i.e. a Unix socket) and optionally
the server parameter set, will be allowed. Other options (nowait, telnet)
will make the chardev unusable and the netdev will not be initialised.
Additional checks for validity:
- requires `-numa node,memdev=..`
- requires `-device virtio-net-*`
The `vhostforce` option is used to force vhost-net when we deal with
non-MSIX guests.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch lifts the minimum supported libiscsi version from 1.4.0 to
1.9.0 since the BUSY patch required that change.
On one this allows us to remove all #ifdefs from the code which
makes the code easier to maintain and read. On the other hand
I would not recommend libiscsi prior to 1.8.0 for production use
because the following important libiscsi fixes for deadlocks and
protocol errors are missing prior to 1.8.0:
dbe9a1e SOCKET queue cmd PDUs directly in waitpdu queue
30df192 DATA-OUT set pdu->cmdsn appropriately
548bd22 ISCSI fix broken send logic in iscsi_scsi_async_command
14bee10 RECONNECT do not increase CmdSN for immediate PDUs
1f4a66a PDU queue out PDUs in order of itt.
562dd46 PDU avoid incrementing itt to 0xffffffff
cd09c0f PDU use serial32 arithmetic for cmdsn, maxcmdsn and expcmdsn.
89e918e SOCKET validate data_size in in_pdu header
91267f5 Limit immediate and unsolicited data to FirstBurstLength
Note that libiscsi 1.9.0 was released on Feb 24th, 2013, about
one month after 1.8.0.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable KVM support for MIPS in the build system.
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This pull request brings a lot of fun things. Among others we have
- e500: u-boot firmware support
- sPAPR: magic page enablement
- sPAPR: add "compat" CPU option to support older guests
- sPAPR: refactorings in preparation for VFIO
- POWER8 live migration
- mac99: expose bus frequency
- little endian core dump, gdb and disas support
- new ppc64le-linux-user target
- DFP emulation
- bug fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQIcBAABAgAGBQJTntTgAAoJECszeR4D/txgvNoP/R9HooeweYnZYQxuTTxCIyPZ
if1KRWj6S3jaZ74RwY7kjqYiBUKzNhqpA068v1QS/8ETjPc44V5RMKVOYoGeLNZz
DiZ+BGIp6OSAW3zILFejdi2h7H86qESu7ZFSHZli7eUVg58JUVcnsrFrqMo5ojhY
ICDbeDTitHkBESx7d93bUpecA535433FFylX1ueSj4FFeIpdhlCQsSZbal4FhxqY
74ra4phwAfHlh28K286ZCduLKih77V5dZlroT89apI2eammD+jvXeewvmYtflcQu
j/0FScSVOAplf0wqlPYM0+JAqbaX9o8ZLfzrMV+80ODdDKSFyGKeMo/PrOKJPtpk
EibFNt67nJ30yGhmVsylsQxHVsmWFumcomA0kDdGLmj4A6mqLWM/7w3PGB1pJTPS
bMvMz6O3B/ebk3wXZaMklcjLCLxCBqdYDG0/h7d+gpBLwqnF1Qgi4vv7g+MeKWtf
Z5qJvUMzaAK6LJbDqOIqYhLCtvv2eYHNqvvjkaSRD5SkRzWnzzmmB+3xfjkLllbM
C9DmcQVL4mh7SL3ELjcX7NT4rC+TWRu/el1eAreMjZT8pUyAbjyOkNGbLMqthaM7
kzrSPc9QMzLmIJPrbH9unCuTf9NP5cUndtCL3kEAkl3FPm4kqiwVvh2WSeYCa0uw
1PvTu0HNT/5NcvOkq/5L
=hi5L
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2014-06-16
This pull request brings a lot of fun things. Among others we have
- e500: u-boot firmware support
- sPAPR: magic page enablement
- sPAPR: add "compat" CPU option to support older guests
- sPAPR: refactorings in preparation for VFIO
- POWER8 live migration
- mac99: expose bus frequency
- little endian core dump, gdb and disas support
- new ppc64le-linux-user target
- DFP emulation
- bug fixes
# gpg: Signature made Mon 16 Jun 2014 12:28:32 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found
* remotes/agraf/tags/signed-ppc-for-upstream: (156 commits)
spapr_pci: Advertise MSI quota
PPC: KVM: Make pv hcall endian agnostic
powerpc: use float64 for frsqrte
spapr: Add kvm-type property
spapr: Create SPAPRMachine struct
linux-user: Tell guest about big host page sizes
spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODE
spapr_hcall: Split h_set_mode()
target-ppc: Enable DABRX SPR and limit it to <=POWER7
target-ppc: Enable PPR and VRSAVE SPRs migration
target-ppc: Add POWER8's Event Based Branch (EBB) control SPRs
KVM: target-ppc: Enable TM state migration
target-ppc: Add POWER8's TM SPRs
target-ppc: Add POWER8's MMCR2/MMCRS SPRs
target-ppc: Enable FSCR facility check for TAR
target-ppc: Add POWER8's FSCR SPR
target-ppc: Add POWER8's TIR SPR
target-ppc: Refactor class init for POWER7/8
target-ppc: Switch POWER7/8 classes to use correct PMU SPRs
target-ppc: Make use of gen_spr_power5p_lpar() for POWER7/8
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a special build of u-boot tailored for the e500 platforms we
emulate. It is based on the current version of upstream u-boot which
contains all the code necessary to drive our QEMU provided machines.
Signed-off-by: Alexander Graf <agraf@suse.de>
Those options were not enabled by default, even when the build
environment would have supported them, so the corresponding
code was not compiled in normal test builds like on build bots.
[Building quorum by default "broke" qemu-iotests ./check 081. It turns
out the 081.out master output was just bitrotted. Fix this by updating
the error message.
--Stefan]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* build fixes
* improvements to strace
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=yKuf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-bsd-user-20140611' into staging
bsd-user queue:
* build fixes
* improvements to strace
# gpg: Signature made Wed 11 Jun 2014 15:23:40 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-bsd-user-20140611:
bsd-user: Fix syscall format, add strace support for more syscalls
bsd-user: Implement strace support for thr_* syscalls
bsd-user: Implement strace support for extattr_* syscalls
bsd-user: Implement strace support for __acl_* syscalls
bsd-user: Implement strace support for print_ioctl syscall
bsd-user: Implement strace support for print_sysctl syscall
bsd-user: GPL v2 attribution update and style
bsd-user: add HOST_VARIANT_DIR for various *BSD dependent code
exec: replace ffsl with ctzl
vhost: replace ffsl with ctzl
xen: replace ffsl with ctzl
util/qemu-openpty: fix build with musl libc by include termios.h as fallback
bsd-user/mmap.c: Don't try to override g_malloc/g_free
util/hbitmap.c: Use ctpopl rather than reimplementing a local equivalent
bsd-user: refresh freebsd system call numbers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make configure detect gtk x11 backend and link libX11 then. Make
gtk backend specific code properly #ifdef'ed on the GTK_WINDOWING_*
backends at runtime). Our gtk ui code should build and run fine on
any platform now.
This also fixes the linker failute due to the new XkbGetKeyboard call
added by commit 3158a3482b.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
This change adds HOST_VARIANT_DIR so the various BSD OS dependent
code can be separated into its own directories rather than
using #ifdef's.
This may also allow an BSD variant OS to host another BSD variant's
executable as a target.
Signed-off-by: Sean Bruno <sbruno@freebsd.org>
Message-id: 1402246651-71099-2-git-send-email-sbruno@freebsd.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The check for big or little endianness relies on grep reporting
match/non-match on the generated binary. If the user specified
--binary-files=without-match in their GREP_OPTIONS, this will fail.
Let's follow what autoconf does and unset GREP_OPTIONS and CLICOLOR_FORCE
at the beginning of the script.
Reported-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'-lrt' flag duplication/incorrect order
would cause 'undefined reference to clock_gettime' error during compilation time.
Before fix:
... -o qemu-bridge-helper qemu-bridge-helper.o -lrt -pthread -lgthread-2.0 -lrt -lglib-2.0
After fix:
... -o qemu-bridge-helper qemu-bridge-helper.o -pthread -lgthread-2.0 -lrt -lglib-2.0
Reference:
http://hi.baidu.com/sanitywolf/item/7a8b69c1e76dd220a0b50ab1
Signed-off-by: Rick Liu <yrliu.ca@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds support to compile QEMU with multiple tracing backends at the same time.
For example, you can compile QEMU with:
$ ./configure --enable-trace-backends=ftrace,dtrace
Where 'ftrace' can be handy for having an in-flight record of events, and 'dtrace' can be later used to extract more information from the system.
This patch allows having both available without recompiling QEMU.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJTgup0AAoJEL7lnXSkw9fb2z0IAJVnjV1b2xGqWrbBFPvm1zdT
8vSKdW77kvtL1Usx2xLLqjn+xfJsmDwiIfEZvAEsma2s8ubVkz9hiQylq9jdSxGi
YR0i8xUeqeF6n2RttzEw9rENHa9qZllxGpBQyIcjxo+7hcgVkj0r15x+JAIkeIpV
6iCx1mqAC5QJbHrIN1eO5ymDZvsq37Q8S9jRU0hJ18MwFfKc1z9T38D+VytnW9xK
l5Qg3JEf9HBI9zTChfRDImTDXNV2Ehm0nK5/8noD0mjp06p/DF/HN+BDsXM/0cPc
aWmoVNa0KGCqXvmI+F/7RWBzxaOkH9UXDrf1ed10Io6Nsp0nGfxWJHEA9to/fyo=
=86oR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-05-26' into staging
trivial patches for 2014-05-26
# gpg: Signature made Mon 26 May 2014 08:17:08 BST using RSA key ID A4C3D7DB
# gpg: Can't check signature: public key not found
* remotes/mjt/tags/trivial-patches-2014-05-26: (23 commits)
libcacard: remove useless initializers
net: cadence_gem: Fix top comment
bsd-user: replace fprintf(stderr, ...) with error_report()
audio: replace fprintf(stderr, ...) with error_report() in audio
libcacard: fix wrong array expansion logic
libcacard/vcard_emul_nss: Drop a redundant conditional
libcacard: Convert two leftover realloc() to GLib
libcacard/vreader: Tighten assertion to clarify intent
libcacard/vreader: Drop broken recovery from failed assertion
libcacard: Plug memory leaks around vreader_get_reader_list()
libcacard/vscclient: Bury some dead code
vl: fix 'name' option to work with -readconfig
configure: Put tempfiles in a subdir of the build directory
dma-helpers: avoid calling dma_bdrv_unmap() twice
arch_init: replace fprintf(stderr, ...) with error_report()
pci: move dereferencing of root only after verifying valid root pointer
jazz_led: Add missing break in switch case
bswap.h: Rename ldl_p, stl_p, etc to ldl_he_p, stl_he_p, etc
configure: Automatically select GTK+ 3.0 if GTK+ 2.0 is unavailable
nbd: Miscellaneous typo fixes.
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Choosing good addresses for them means we can use JAL for helper calls.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When libtool support was added to configure, the new temporary files
were left out of the list of files cleaned up on exit; this results
in a lot of stale .lo files being left around in /tmp. Worse, libtool
creates a /tmp/.libs directory which we can't easily clean up.
Put all our temporary files in a single temporary directory created
as a subdirectory of the build directory, so we can easily clean it up,
and don't need fragile or complicated code for creation to avoid it
clashing with temporary directories from other instances of QEMU
configure or being subject to attack from adversaries who can write
to /tmp.
Since the temporaries now live in the build tree, we have no
need to jump through hoops with a trap handler to try to remove
them when configure exits; this fixes some weird bugs where hitting
^C during a configure run wouldn't actually make it stop, because
we would run the trap handler but then not stop. (It is possible
to get the trap handler semantics right but it is convoluted largely
because of bugs in dash, so it is simpler to just avoid it.)
Note that "temporary files go in the build directory, not /tmp" is
the way autoconf behaves.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The configure option --with-gtkabi=3.0 is still supported, but no longer
needed when GTK+-2.0 is missing. When no GTK+ ABI is selected by the
user, configure first tries 2.0, then 3.0.
For some platforms (e.g. Windows) newer binaries of GTK+ are only
available for GTK+ 3.0. Now building on these platforms is a little bit
easier.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTdOpIAAoJEK0ScMxN0CebAJUIAKmxOlk39ukPD3hn8Ik1MCr8
byJLcCZrdTzKMAjiovQIAmTmMQ4dba0YI6E+G8H4Z21u74P3fgUbhlt3SHpeMNch
kbfIUJ4PYAar9wze858rD4BANOOMB3qLjkE3LH8WF70S8S7yTc7fsCrDqS0+qG0P
+fFHdoHT1w93O5V07ELI9xCDEeCH7gE6znD0RLAc00SNErDWBCZKIpgT45K0bJmG
1uX8nuUHx6U8TUpjLzwUomJc5o3OeutbF3H2XlVQdzbPbBchkjeHEZ9jv2h2q6bC
e3xVzwBL7IP3vVEMLT6WWkNtI3XO1erDOjzbw/4F6hqpMOFy92Lpmpib8Q2W+S0=
=glsl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-s390-20140515' into staging
tcg/s390 updates
# gpg: Signature made Thu 15 May 2014 17:24:40 BST using RSA key ID 4DD0279B
# gpg: Can't check signature: public key not found
* remotes/rth/tags/pull-tcg-s390-20140515:
tcg-s390: Implement direct chaining of TBs
tcg-s390: Don't force -march=z990
tcg-s390: Improve setcond
tcg-s390: Allow immediate operands to add2 and sub2
tcg-s390: Implement tcg_register_jit
tcg-s390: Use more risbg in the tlb sequence
tcg-s390: Move ldst helpers out of line
tcg-s390: Convert to new ldst opcodes
tcg-s390: Integrate endianness into TCGMemOp
tcg-s390: Convert to TCGMemOp
tcg-s390: Fix off-by-one in wraparound andi
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While we still require the LONG DISPLACEMENT facility, defaults
have moved on since then. Don't override the system compiler,
whose default may be set to z9-109 or later.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This reverts commit f915db07ef.
This commit is broken because it does not account for the
build tree and the source tree being different, and can cause
build failures for out-of-tree builds. Revert it until we can
identify a better solution to the problem.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1400153676-30180-1-git-send-email-peter.maydell@linaro.org
Acked-by: Kevin Wolf <kwolf@redhat.com>
* remotes/bonzini/configure:
libcacard: remove libcacard-specific CFLAGS and LIBS from global vars
build: simplify and fix fix-obj-vars
build: convert some obj-specific CFLAGS to use new foo.o-cflags syntax
build: add support for per-object -cflags and -libs to all rules
Makefile: use $(INSTALL_LIB) for modules not $(INSTALL_PROG)
Makefile.target: use $(INSTALL_PROG) for installing, not $(INSTALL)
Makefile: strip tools and modules too
build: simplify Makefile.target around unnest-vars invocations
build: simplify Makefile.target a bit, use just one rule for softmmu
build: Fix per-object variables for Makefile.target
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently all what's needed for single file libcacard/vcard_emul_nss.c
(libnss cflags) and hw/usb/ccid-card-emulated.c (libcacard includes)
together with the libs is added to global QEMU_CFLAGS and libs_softmmu.
Use the cflags only where really used (for two mentioned files), and
libs only where needed.
While at it, rename variables to better reflect reality: libcacard_*
is really nss_*.
This needs a bit more tweaking: $(NSS_LIBS) should not contain $glib_libs
(ditto for _cflags). But in order to fix it, some more preparations
should be made first. So add a FIXME comment.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, QEMU's iotests rely on /usr/bin/env to start the correct
Python (that is, at least Python 2.4, but not 3). On systems where
Python 3 is the default, the user has no clean way of making the iotests
use the correct binary.
This commit makes the iotests use the Python selected by configure.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTamnaAAoJEJykq7OBq3PIvIIH/jX2XsOLfCh9GCKxTrFU3mS7
5/0z9bObS/vWXXVun6DDlrgAUURlmhsm9jiMqpViNHf4AuNCgDkfwrFbrhmd8YPA
+5Pq4jcpCKaDol/E63DMlUIwMpTwlW46rDoXfLGzHQDW0WBduSrL0qUYjJg0wMOj
1LCTAQSxNDeumUYfsRWPxThSN0gXgPNIbR5B5OQi2WqGiEB36+nGWdgMzJ34ZHDO
xql/uLkJsXmX2WFJX7Hr9upxXikRwC0K4B9yTI8ozq7fUQ1hg4WvJ1B/3UxJRv+Y
QTvqhQ6suPfjoypohdMO7FDITZpFzkimfcGgBje7bBifz6CpluC0ppQyKVC+ic4=
=kUXD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
Tracing pull request
# gpg: Signature made Wed 07 May 2014 18:14:02 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/tracing-pull-request:
configure: Show trace output file conditionally
trace: [tracetool] Minimize the amount of per-backend code
trace: [simple] Bump up log version number
trace: [tracetool] Change format docs to point to the generated file
trace: [tracetool] Show list of frontends and backends sorted by name
trace: [tracetool] Cosmetic changes
trace: [tracetool] Spacing changes
trace: [tracetool] Add methods 'Event.copy' and 'Arguments.copy'
trace: [tracetool] Add method 'Event.api' to build event names
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit e26110cfc6 added a check for shacmd to create a hash
for modules. This check in configure is using bash construct &>
to redirect both stdout and stderr, which does fun things on some
shells. Get rid of it, use standard redirection instead.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Fam Zheng <famz@redhat.com>
When source directory can be arrived at by two paths,
configure might misdetect an out of tree build.
The simplest way to trigger the problem is running
configure using a full path. E.g. (<firstpath> refers to qemu source
tree):
ln -s <firstpath> <secondpath>
cd <firstpath>
<secondpath>/configure
A more practical way is when make runs configure automatically:
1. cd <firstpath>/; ./configure
SRC_PATH=<firstpath>/ is written into config_host.mak
2. cd <secondpath>/; touch configure; make
make now runs <firstpath>/configure, so configure
assumes it's an out of tree build
When this happens configure overwrites parts of
the current tree with symlinks.
Make the test more robust: look for configure
in the current directory.
If there - we know it's a source build!
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
--enable-uname-release was a rather heavyweight hammer, as it allows
providing values less that UNAME_MINIMUM_RELEASE. Also, it affects
all built linux-user targets, which in most cases is not what user
wants.
Now that we have UNAME_MINIMUM_RELEASE for all linux-user platforms,
we can drop --enable-uname-release and the related CONFIG_UNAME_RELEASE
define.
Users can still override the variable with QEMU_UNAME=2.6.32 or -r
command line option. If distributors need to update a minimum version
for a specific target, it can be done by updating UNAME_MINIMUM_RELEASE.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reconfiguring with a different --with-gtkabi or --with-sdlabi doesn't
trigger a remake. Generate an (unused) CONFIG_GTKABI/CONFIG_SDLABI
so config-host.h will actually give 'make' something to trigger on.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Old:
There are two paths to show help and exit 1, one is with "-h" or
"--help", one is with invalid options.
New:
Show help and exit 0 for --help.
On invalid option, don't show the long help and bury the early "ERROR:"
line, just give a message pointing to --help.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The compiler flag -Werror is printed (or not printed) as any other
compiler flag which is part of QEMU_CFLAGS.
Therefore an extra output line for -Werror is redundant and can be removed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The help text for the --enable-debug-info and --disable-debug-info
command line options was misindented: delete the stray extra space
and bring it in to line with everything else.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since we use the -fstack-protector argument at both compile and
link time in the build, we must check that it works with both
a compile and a link:
* MacOSX only fails in the compile step, not linking
* some gcc cross environments only fail at the link stage (if they
require a libssp and it's not present for some reason)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1397232832-32301-1-git-send-email-peter.maydell@linaro.org
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
MacOSX clang silently swallows unrecognized -f options when doing a link
with '-framework' also on the command line, so to detect support for
the various -fstack-protector options we must do a plain .c to .o compile,
not a complete compile-and-link.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1397041487-28477-1-git-send-email-peter.maydell@linaro.org
Here are some bugfixes for 2.0.
A bugfix for acpi for pci bridges, and a build fix for
old systems without pthread_setname_np: both fix regressions
so we definitely want to include them.
HPET fix is not for a regression but looks very safe,
fixes a nasty bug and has been on list for a while.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTNWRMAAoJECgfDbjSjVRp6CoH/A3iLi+jkV4EhQQzU8U6vOmi
PIV71600rZd29u4hk6w5pyev6yyXSBwatmWk+vzHvINUIcc22KUue+773nXPW/fH
3oIgTwjKndE98V5vTSeOgOdD7iFuWlcgHQHLXXMsgpY1hVMS/1kidZdb+36o8euI
kdE+AxYGXS8Z3oBRFfROpT4v0UZ17qIaL4tqA4JJWMh/A3Qp3HY+ffU3ODAvKSQw
KWVWmKvbh82I25HOvALoMwtu26x48jhzu586pHBuEsHgTJKKBrAUdWph+2f1eSC+
xTgduKWEgK6Z9dCYDQwDaM8CqNzjqVzfgRu0RCSHtgTxCWaIN3dQbxEFi7WQ2Yo=
=dfqJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,build bug fixes
Here are some bugfixes for 2.0.
A bugfix for acpi for pci bridges, and a build fix for
old systems without pthread_setname_np: both fix regressions
so we definitely want to include them.
HPET fix is not for a regression but looks very safe,
fixes a nasty bug and has been on list for a while.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 28 Mar 2014 12:00:12 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
acpi: fix ACPI generation for pci bridges
Don't enable a HPET timer if HPET is disabled
Detect pthread_setname_np at configure time
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Warn if no way of setting thread name is available.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GTK without VTE is needed for hosts which don't support VTE (for example
all variants of MinGW), but it can also be reasonable for other hosts.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
libnfs prior to 1.9.3 contains a bug that will report
wrong transfer sizes if the file offset grows beyond 4GB
and RPC responses are received out of order. this
error is not detectable and fixable in qemu.
additionally 1.9.3 introduces support for handling short
read/writes in general and takes care of the necessary
retransmissions internally.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Those versions don't fully support __int128_t.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
More small fixes: the issues annoy developers so
I thought they are worth fixing quickly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTHvMwAAoJECgfDbjSjVRp2SIH/Rh5X1U+tUjr0xnvWllXTgdP
ixot7AxXO2UkmPqhyAPV/oEr/3xBFyp8C8ZysQzaHsUqDyq40DtkKp+UWvG6EjpY
3Ser+wA9NzsT67ixtEIN2z1qnO7l29ErggS8EfTOh7gyFJzSKN8x3GV2ENB/FBJW
k0LSO7aJ0rmTdg63u9T3RIctKPbtCBO8wlE6wuS461pBshYNr6aVkMWDY9bVpx/f
ol/aoJs7xaPkJs1qFzOfOisYi3LeBZR4O9gRRixqzwJtwWl5rMG3y/oBxbYDfyZw
NbP7zFAWCj/YYgG0U8L9SR4P28n65FoULAvQ9CRY1+fF7Ozwj0SzoU2Ld6fvINw=
=VRRB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,test bug fixes
More small fixes: the issues annoy developers so
I thought they are worth fixing quickly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 11 Mar 2014 11:27:44 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
acpi-test: update expected SSDT files
acpi-build: don't access unaligned addresses
q35: Correct typo BRDIGE -> BRIDGE
configure: don't modify .status on error
pc: avoid duplicate names for ROM MRs
loader: rename in_ram/has_mr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
./configure --help
make
will try to re-run configure with --help
which isn't what was intended.
The reason is that config.status was written
even on configure error.
Defer writing config.status until configure
has completed successfully.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Instead of
spice support no (/)
configure now prints
spice support no
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
MacOSX doesn't pull .o files from .a archives if the symbol that it
requires is one which the .o file defines as a common symbol.
(Common symbols are those declared without "extern"; the linker
will merge together common symbols with the same name, so
redeclaring the same variable in two compilation units results in
them referring to the same symbol rather than a compilation error).
This MacOSX difference from traditional linker behaviour means that
"make check" produces link errors:
Undefined symbols for architecture x86_64:
"_cur_mon", referenced from:
_error_vprintf in libqemuutil.a(qemu-error.o)
_error_printf in libqemuutil.a(qemu-error.o)
_error_printf_unless_qmp in libqemuutil.a(qemu-error.o)
_error_print_loc in libqemuutil.a(qemu-error.o)
_error_report in libqemuutil.a(qemu-error.o)
ld: symbol(s) not found for architecture x86_64
in this case because "cur_mon" is a common symbol in
libqemustub.a(mon-set-error.o).
In QEMU we don't make any use at all of the common symbol
functionality, so we can avoid this problem entirely simply
by compiling with -fno-common. Enable this option for all
builds, not just MacOSX, so that if we ever inadvertently
introduce multiple definitions of some variable that will
be immediately spotted as a build error rather than only
breaking the MacOSX build.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1393451610-24617-1-git-send-email-peter.maydell@linaro.org
gcc's C++ compiler complains about being passed some -W options
which make sense for C but not for C++. This means we mustn't try
a C++ compile with QEMU_CFLAGS, but only with a filtered version
that removes the offending options. This filtering was already being
done for uses of C++ in the build itself, but was omitted for the
"does C++ work?" configure test. This only showed up when doing
builds which explicitly enabled -Werror with --enable-werror,
because the "do the compilers work" tests were mistakenly placed
above the "default werror based on whether compiling from git" code.
Another error in this category is that clang warns if you ask it to
compile C++ code from a file named "foo.c". Further, because we
were running do_cc in a subshell in the condition part of an "if",
the error_exit inside do_compiler wouldn't terminate configure and
we would plunge on regardless. Fix this complex of errors:
1. Move the default-werror code up so that there are no invocations
of compile_object and friends between it and the point where we
set $werror explicitly based on the --enable-werror command line
option.
2. Provide a mechanism for filtering QEMU_CFLAGS to create
QEMU_CXXFLAGS, and use it for the test we run here.
3. Provide a do_cxx function to run a test with the C++ compiler
rather than doing cute tricks with subshells and do_cc.
4. Use a new temporary file TMPCXX for the C++ program fragment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org
Tested-by: Andreas Färber <afaerber@suse.de>
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
kdump-compressed format supports three compression format, zlib/lzo/snappy.
Currently, only zlib is available. This patch is used to support lzo/snappy.
'--enable-lzo/--enable-snappy' is needed to be specified with configure to make
lzo/snappy available for qemu
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* fixes for various Coverity-spotted bugs
* support new KVM device control API for VGIC
* support KVM VGIC save/restore/migration
* more AArch64 system mode foundations
* support ARMv8 CRC instructions for A32/T32
* PL330 minor fixes and cleanup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=1X50
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140226' into staging
target-arm queue:
* fixes for various Coverity-spotted bugs
* support new KVM device control API for VGIC
* support KVM VGIC save/restore/migration
* more AArch64 system mode foundations
* support ARMv8 CRC instructions for A32/T32
* PL330 minor fixes and cleanup
# gpg: Signature made Wed 26 Feb 2014 17:51:32 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140226: (45 commits)
dma/pl330: implement dmaadnh instruction
dma/pl330: Fix buffer depth
dma/pl330: Add event debugging printfs
dma/pl330: Rename parent_obj
dma/pl330: printf format type sweep.
dma/pl330: Fix misleading type
dma/pl330: Delete overly verbose debug printf
target-arm: Add support for AArch32 ARMv8 CRC32 instructions
include/qemu/crc32c.h: Rename include guards to match filename
target-arm: Add utility function for checking AA32/64 state of an EL
target-arm: Implement AArch64 view of CPACR
target-arm: A64: Implement MSR (immediate) instructions
target-arm: Store AIF bits in env->pstate for AArch32
target-arm: A64: Implement WFI
target-arm: Get MMU index information correct for A64 code
target-arm: Implement AArch64 OSLAR_EL1 sysreg as WI
target-arm: Implement AArch64 dummy breakpoint and watchpoint registers
target-arm: Implement AArch64 ID and feature registers
target-arm: Implement AArch64 generic timers
target-arm: Implement AArch64 MPIDR
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTDJtxAAoJEJykq7OBq3PIEBAH/0Fh1TUsHpLGwtVC+HObl4HF
19KJpaXfG3L1x5pV4qbRvsmgXDNjnm8sSAbAvINn5uKJqk371qshvgssaIyLOA/o
VD+9lR1mwE9mwiktCfFniddoZmTsMyGxsbE4i1dZAxsGuuiJ3x2zRotpQCLjmWMJ
OSIdy1v657tR0EnhjI19g4fNvCpfOwX3tvMt20vgL6/x9AuNjMfFeP6S/KNuxBBC
6vflVNmN0AIc/tIbR5bql5/wcDixJcxobFXHxAmIbaaJTNtFXq0PNpo0kfLi5Zzx
s6iVoYVXNMx1xqpegBEVLyIvtcX7SCggO8FT+bhzaOfPVL8NaSXRJMRjH22V+D0=
=UA+s
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging
Net patches
# gpg: Signature made Tue 25 Feb 2014 13:32:33 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/net-pull-request:
virtio-net: use qemu_get_queue() where possible
vhost_net: use offload API instead of bypassing it
net: remove implicit peer from offload API
net: Disable netmap backend when not supported
net: add offloading support to netmap backend
net: make tap offloading callbacks static
net: virtio-net and vmxnet3 use offloading API
net: TAP uses NetClientInfo offloading callbacks
net: extend NetClientInfo for offloading
net: change vnet-hdr TAP prototypes
opencores_eth: flush queue whenever can_receive can go from false to true
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for AArch32 CRC32 and CRC32C instructions added in ARMv8
and add a CPU feature flag to enable these instructions.
The CRC32-C implementation used is the built-in qemu implementation
and The CRC-32 implementation is from zlib. This requires adding zlib
to LIBS to ensure it is linked for the linux-user binary.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1393411566-24104-3-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gmodule-2.0's pkg-config files include -Wl,--export-dynamic, which breaks
static builds. It is a glib bug, but we need to support --static builds for
the linux-user targets, and in the end all that is needed to fix this is:
* outlaw --enable-modules --static, which makes little sense anyway
* only include gmodule-2.0's cflags and ldflags if --enable-modules is
specified on the command line.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1393346215-5636-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch fixes configure so that the netmap backend is not compiled in if the
host doesn't support an API version >= 11. A version upper bound (15) has been
added so that the netmap API can be extended with some minor features without
requiring QEMU code modifications.
Moreover, some changes have been done to net/netmap.c in order to reflect the
current netmap API/ABI (11).
The NETMAP_WITH_LIBS macro makes possible to include some utilities (e.g.
netmap ring macros, D(), RD() and other high level functions) through the netmap
headers. In this way we get rid of the D and RD macro definitions in the QEMU
code, and we open the way for further code simplifications that will be
introduced by future patches.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZaDG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 21 Feb 2014 21:42:24 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (54 commits)
iotests: Mixed quorum child device specifications
quorum: Simplify quorum_open()
quorum: Add unit test.
quorum: Add quorum_open() and quorum_close().
quorum: Implement recursive .bdrv_recurse_is_first_non_filter in quorum.
quorum: Add quorum_co_flush().
quorum: Add quorum_invalidate_cache().
quorum: Add quorum_getlength().
quorum: Add quorum mechanism.
quorum: Add quorum_aio_readv.
blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify.
quorum: Add quorum_aio_writev and its dependencies.
quorum: Create BDRVQuorumState and BlkDriver and do init.
quorum: Create quorum.c, add QuorumChildRequest and QuorumAIOCB.
check-qdict: Test termination of qdict_array_split()
check-qdict: Adjust test for qdict_array_split()
qdict: Extract non-QDicts in qdict_array_split()
qemu-config: Sections must consist of keys
qemu-iotests: Check qemu-img command line parsing
qemu-img: Allow -o help with incomplete argument list
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/configure:
build: softmmu targets do not have a "main.o" file
configure: Disable libtool if -fPIE does not work with it (bug #1257099)
block: convert block drivers linked with libs to modules
Makefile: introduce common-obj-m and block-obj-m for DSO
Makefile: install modules with "make install"
module: implement module loading
rules.mak: introduce DSO rules
darwin: do not use -mdynamic-no-pic
block: use per-object cflags and libs
rules.mak: allow per object cflags and libs
rules.mak: fix $(obj) to a real relative path
util: Split out exec_dir from os_find_datadir
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check that the C++ compiler works with the C compiler; if it
does not, then don't pass CXX to the build process. This
fixes a regression where QEMU was no longer building if the
build environment didn't have a C++ compiler (introduced
in commit 3144f78b, which incorrectly assumed that rules.mak
would only see a non-empty $(CXX) if configure had actually
found a working C++ compiler).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reported-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1392909016-14028-1-git-send-email-peter.maydell@linaro.org
This patchset enables the core of the quorum mechanism.
The num_children reads are compared to get the majority version and if this
version exists more than threshold times the guest won't see the error at all.
If a block is corrupted or if an error occurs during an IO or if the quorum
cannot be established QMP events are used to report to the management.
Use gnutls's SHA-256 to compare versions.
--enable-quorum must be used to enable the feature.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTBNDcAAoJEJykq7OBq3PISEMIAIrJN9RTfpeAaUY4bSj9Q283
ReAgkTbe1yhuvik8E3sN9OOm24EfD9o2mE3Io2Jq1tslgM0yDXcuBoIT6rrmwF3L
MLRtE89JIStv1JbNyeorTgS8N/6kY0evKkmG8kskwHS3QVCKo3+OsPz7D6JNQrdA
KQNJZa19DVIfdgBGCD1HuGOVgCIe3rrGOc16/XvPuK3CXACyvfEO7B/1YStSXBu5
QmtccRMzCo7Xt6PwAvq4RclNa45lnjVvv0lcyApdajn/zFGBzXmK19NrMhDDHQC+
fLS3fmWQCo3dFeVwoyfUhamt3wxD3Mpp5PYEytJ5EOmv+UPuCQ1/8SQJjxxKESo=
=sVTF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
Tracing pull request
# gpg: Signature made Wed 19 Feb 2014 15:42:20 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace-events: Fix typo in "offset"
Add ust generated files to .gitignore
Update documentation for LTTng ust tracing
Adapt Makefiles to the new LTTng ust interface
Modified the tracetool framework for LTTng 2.x
Fix configure script for LTTng 2.x
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Win32 doesn't have a cpuid.h, and MacOSX may have one but without
the __cpuid() function we use, which means that commit 9d2eec20
broke the build for those platforms. Fix this by tightening up
our configure cpuid.h check to test that the functions we need
are present, and adding some missing #ifdef guards in
tcg/i386/tcg-target.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Adjust TMPO and added TMPB, TMPL, and TMPA. libtool needs the names
to be fixed (TMPB).
Add new functions do_libtool and libtool_prog.
Add check for broken gcc and libtool.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds loading, stamp checking and initialization of modules.
The init function of dynamic module is no longer directly called as
__attribute__((constructor)) in static linked version, it is called
only after passed the checking of presense of stamp symbol:
qemu_stamp_$RELEASEHASH
where $RELEASEHASH is generated by hashing version strings and content
of configure script.
With this, modules built from a different tree/version/configure will
not be loaded.
The module loading code requires gmodule-2.0.
Modules are searched under
- CONFIG_MODDIR
- executable folder (to allow running qemu-{img,io} in the build
directory)
- ../ of executable folder (to allow running system emulator in the
build directory)
Modules are linked under their subdir respectively, then copied to top
level of build directory for above convinience, e.g.:
$(BUILD_DIR)/block/curl.so -> $(BUILD_DIR)/block-curl.so
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add necessary rules and flags for shared object generation.
The new rules introduced here are:
1) %.o in $(common-obj-m) is compiled to %.o, then linked to %.so.
2) %.mo in $(common-obj-m) is the placeholder for %.so for pattern
matching in Makefile. It's linked to "-shared" with all its dependencies
(multiple *.o) as input. Which means the list of depended objects must
be specified in each sub-Makefile.objs:
foo.mo-objs := bar.o baz.o qux.o
in the same style with foo.o-cflags and foo.o-libs. The objects here
will be prefixed with "$(obj)/" if it's a subdirectory Makefile.objs.
3) For all files ending up in %.so, the following is added automatically:
foo.o-cflags += -fPIC -DBUILD_DSO
Also introduce --enable-modules in configure, the option will enable
support of shared object build. Otherwise objects are static linked to
executables.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While -mdynamic-no-pic can speed up the code somewhat, it is only used
on the legacy PowerPC Mac OS X, and I am not sure if anyone is still
testing that. Disabling PIC can cause problems when enabling modules,
so do not do that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No longer adds flags and libs for them to global variables, instead
create config-host.mak variables like FOO_CFLAGS and FOO_LIBS, which is
used as per object cflags and libs.
This removes unwanted dependencies from libcacard.
Signed-off-by: Fam Zheng <famz@redhat.com>
[Split from Fam's patch to enable modules. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Makefile.target includes rule.mak and unnested common-obj-y, then prefix
them with '../', this will ignore object specific QEMU_CFLAGS in subdir
Makefile.objs:
$(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS)
Because $(obj) here is './block', instead of '../block'. This doesn't
hurt compiling because we basically build all .o from top Makefile,
before entering Makefile.target, but it will affact arriving per-object
libs support.
The starting point of $(obj) is passed in as argument of unnest-vars, as
well as nested variables, so that different Makefiles can pass in a
right value.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This resolves the build issue with building the ROMs on OpenBSD on x86 archs.
As of OpenBSD 5.3 the compiler builds PIE binaries by default and thus the
whole OS/packages and so forth. The ROMs need to have PIE disabled.
Check in configure whether the compiler supports the flags for disabling
PIE, and if it does then use them for building the ROMs. This fixes the
following buildbot failure:
>From the OpenBSD buildbots..
Building optionrom/multiboot.img
ld: multiboot.o: relocation R_X86_64_16 can not be used when making a shared object; recompile with -fPIC
Signed-off by: Brad Smith <brad@comstyle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Modify feature_not_found to accept an optional second parameter to be
printed after the generic feature not found error.
Modify most calls to feature_not_found to provide hints as to the
packages that may be missing. The few calls remaining without a remedy
are ones I couldn't work out how to remedy myself.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Most distros package it as libfdt, and mentioning libfdt here makes it
much easier to find the package you're missing.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XErB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-anthony' into staging
Block patches
# gpg: Signature made Sun 09 Feb 2014 08:12:51 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-anthony:
block: Fix 32 bit truncation in mark_request_serialising()
blkdebug: Don't leak bs->file on failure
block: Don't call ROUND_UP with negative values
block: bdrv_aligned_pwritev: Assert overlap range
block: Fix memory leaks in bdrv_co_do_pwritev()
raw: Fix BlockLimits passthrough
qemu-iotests: add test for qcow2 preallocation with different cluster sizes
qcow2: check for NULL l2meta
qcow2: fix offset overflow in qcow2_alloc_clusters_at()
qcow2: remove n_start and n_end of qcow2_alloc_cluster_offset()
block/iscsi: always fill bs->bl.opt_transfer_length
block: Fail gracefully with missing filename
qemu-iotests: enable support for NFS protocol
qemu-iotests: enable test 016 and 025 to work with NFS protocol
qemu-iotests: blacklist test 020 for NFS protocol
qemu-iotests: change _supported_proto to file for various tests
block: add native support for NFS
qemu-iotest: Make 077 raw-only
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds native support for accessing images on NFS
shares without the requirement to actually mount the entire
NFS share on the host.
NFS Images can simply be specified by an url of the form:
nfs://<host>/<export>/<filename>[?param=value[¶m2=value2[&...]]]
For example:
qemu-img create -f qcow2 nfs://10.0.0.1/qemu-images/test.qcow2
You need LibNFS from Ronnie Sahlberg available at:
git://github.com/sahlberg/libnfs.git
for this to work.
During configure it is automatically probed for libnfs and support
is enabled on-the-fly. You can forbid or enforce libnfs support
with --disable-libnfs or --enable-libnfs respectively.
Due to NFS restrictions you might need to execute your binaries
as root, allow them to open priviledged ports (<1024) or specify
insecure option on the NFS server.
For additional information on ROOT vs. non-ROOT operation and URL
format + parameters see:
https://raw.github.com/sahlberg/libnfs/master/README
Supported by qemu are the uid, gid and tcp-syncnt URL parameters.
LibNFS currently support NFS version 3 only.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use libvixl to implement disassembly output in debug
logs for A64, for use with both AArch64 hosts and targets.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM:
* added support for target disassembly
* switched to custom QEMUDisassembler so the output format
matches what QEMU expects
* make sure we correctly fall back to "just print hex"
if we didn't build the AArch64 disassembler because of
lack of a C++ compiler
* rename from 'aarch64' to 'arm-a64' because this is a
disassembler for the A64 instruction set
* merge aarch64.c and aarch64-cxx.cc into one C++ file
* simplify the aarch64.c<->aarch64-cxx.cc interface]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ensure configure will set-up links for the files
if the build is created in other directory.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support .bdrv_co_write_zeroes() from gluster driver by using GlusterFS API
glfs_zerofill() that off-loads the writing of zeroes to GlusterFS server.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* stefanha/block:
commit: Remove unused check
qemu-iotests: Update test cases for commit active
commit: Support commit active layer
block: Add commit_active_start()
mirror: Move base to MirrorBlockJob
mirror: Don't close target
qemu-iotests: drop duplicate virtio-blk initialization failure
vmdk: Allow vmdk_create to work with protocol
vmdk: Check VMFS extent line field number
docs: updated qemu-img man page and qemu-doc to reflect VHDX support.
block: vhdx - improve error message, and .bdrv_check implementation
block/iscsi: Fix compilation for libiscsi 1.4.0 (API change)
qapi-schema: fix QEMU 1.8 references
dataplane: replace hostmem with memory_region_find
dataplane: change vring API to use VirtQueueElement
vring: factor common code for error exits
vring: create a common function to parse descriptors
sheepdog: fix dynamic grow for running qcow2 format
Message-id: 1387554416-5837-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The help message uses $python and displays its value, so that macro
should be tested and set early.
With this modification, configure --help displays the correct value
(usually python -B) and no longer creates several *.pyc files.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In the new form most lines of the code now look like the final output:
there is no leading echo command and the lines are shorter.
The resulting output is nearly identical: the only difference is a blank
character which was deliberately removed:
@@ -8,7 +8,7 @@
--interp-prefix=PREFIX where to find shared libraries, etc.
use %M for cpu name [/usr/gnemul/qemu-%M]
--target-list=LIST set target list (default: build everything)
- Available targets: alpha-softmmu arm-softmmu
+ Available targets: alpha-softmmu arm-softmmu
cris-softmmu i386-softmmu lm32-softmmu m68k-softmmu
microblaze-softmmu microblazeel-softmmu mips-softmmu
mips64-softmmu mips64el-softmmu mipsel-softmmu
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Function iscsi_read10_task got additional parameters starting with version
libiscsi 1.5.0.
libiscsi 1.4.0 is still widely used (Debian wheezy, jessie and other Linux
distributions currently provide packages for QEMU which use it), so we
still need support for this older API.
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Register the aarch64-fpu XML and implement the necessary
read/write handlers so we can support reading and writing
of FP registers in the gdb stub.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Enable KVM if the host and target CPU are both aarch64. Note
that host aarch64 + target arm is not valid for KVM acceleration:
the 64 bit kernel does not support the ioctl interface for
32 bit CPUs. 32 bit VMs on 64 bit hosts need to be created
using the 64 bit ioctl interface; when QEMU supports this it
will be on the arch64-softmmu target with a -cpu parameter for
a 32 bit CPU, which is still an aarch64/aarch64 combination
as far as configure is concerned.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-5-git-send-email-peter.maydell@linaro.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
# By Paolo Bonzini (4) and Peter Lieven (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
help: add id suboption to -iscsi
scsi-disk: fix WRITE SAME with large non-zero payload
block/iscsi: introduce bdrv_co_{readv, writev, flush_to_disk}
scsi-disk: fix VERIFY emulation
scsi-bus: fix transfer length and direction for VERIFY command
Message-id: 1386594157-17535-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This patch adds support for a network backend based on netmap.
netmap is a framework for high speed packet I/O. You can use it
to build extremely fast traffic generators, monitors, software
switches or network middleboxes. Its companion software switch
VALE lets you interconnect virtual machines.
netmap and VALE are implemented as a non-intrusive kernel module,
support NICs from multiple vendors, are part of standard FreeBSD
distributions and available in source format for Linux too.
To compile QEMU with netmap support, use the following configure
options:
./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys
where "/path/to/netmap" contains the netmap source code, available at
http://info.iet.unipi.it/~luigi/netmap/
The same webpage contains more information about the netmap project
(together with papers and presentations).
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this converts read, write and flush functions from aio to coroutines
eliminating almost 200 lines of code.
The requirement for libiscsi is bumped to version 1.4.0 which was
released in may 2012.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This has a fix for a crasher bug with pci bridges,
boot failure fix for s390 on 32 bit hosts,
and fixes build for hosts with old glib.
There's also a fix for --iasl configure flag - it can be used
to work around broken iasl on some systems either
by using a non-standard iasl or by disabling it.
I've also reverted a e1000/rtl mac programming change
that seems slightly wrong and too risky for 1.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSkzcXAAoJECgfDbjSjVRprVkIAJI0t8gfgichVVthsXPjCEI+
WlibVjN+BDt0S/y8sb5H43JAJS9JN6myi9rSNc2t2bdEynVJEDpGL9BZG/9RMjZ3
ekhyQsDVu8jzAseiFicBTtHt31RSjSyGsTAFks28FaB2p3DxYT6DY2enJ4CrtLR0
CCqMmvBWJY/hLjdiuYyuAKNrTSKkmdlddUWJyI5lWXJQbP6dx3cjF6OrUnCngBFG
TJ6Oh9lWC2IWf86P+73JtwpkTkm41shyMBz4MTAY0AvriKBzn27qTrP9BwL5rfaM
Tsaoc9Y81+4bd5EiDo3NpA2pAyCF9H+oeR1Zblce6p60wOKKfGvwT65KOH7fc1M=
=bdsX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc very last minute fixes for 1.7
This has a fix for a crasher bug with pci bridges,
boot failure fix for s390 on 32 bit hosts,
and fixes build for hosts with old glib.
There's also a fix for --iasl configure flag - it can be used
to work around broken iasl on some systems either
by using a non-standard iasl or by disabling it.
I've also reverted a e1000/rtl mac programming change
that seems slightly wrong and too risky for 1.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 25 Nov 2013 03:40:07 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (5) and Bandan Das (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
configure: make --iasl option actually work
Revert "e1000/rtl8139: update HMP NIC when every bit is written"
acpi-build: fix build on glib < 2.14
acpi-build: fix build on glib < 2.22
pci: unregister vmstate_pcibus on unplug
s390x: fix flat file load on 32 bit systems
Message-id: 1385379990-32093-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
--iasl option was added to CC option parsing section by mistake,
it's not effective there and attempts to use cause
an 'unknown option' error.
Fix this up.
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Our rules.mak adds '-rR' to MAKEFLAGS to indicate that we will be
explicitly specifying everything and not relying on any default
variables or rules. However we were accidentally relying on the
default ARFLAGS ("rv"). This went unnoticed because of a bug in
GNU Make 3.82 and earlier which meant that adding -rR to MAKEFLAGS
only affected submakes, not the currently running instance.
Explicitly set ARFLAGS in config-host.mak, in the same way we
handle CFLAGS and LDFLAGS; this will allow us to work with
Make 4.0.
Thanks to Paul Smith for analyzing this bug for us.
Cc: qemu-stable@nongnu.org
Reported-by: Ken Moffat <zarniwhoop@ntlworld.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Jan Krupa (4) and others
# Via Michael Tokarev
* mjt/trivial-patches:
hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently
configure: Use -B switch only for Python versions which support it
qga: Fix shutdown command of guest agent to work with SysV
console: Remove unused debug code
qga: Fix compilation for old versions of MinGW
.travis.yml: basic compile and check recipes
pci-assign: Fix error_report of pci-stub message
qapi: Fix comment for create-type to match code.
vl: fix build when configured with no graphic support
usb: drop unused USBNetState.inpkt field
qemu-char: add missing characters used in keymaps
qemu-char: add support for U-prefixed symbols
qemu-char: add Czech keymap file
qemu-char: add Czech characters to VNC keysyms
Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Commit 1d984a67a9 added the -B switch
unconditionally. This breaks Python versions before 2.6 which don't
support that switch.
Now configure adds -B only if it is accepted by the Python interpreter.
This modification introduces a small incompatibility because -B might now
also be added when configure was called with --python=PYTHON_INTERPRETER.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
# By Jeff Cody (26) and others
# Via Stefan Hajnoczi
* stefanha/block: (37 commits)
block: Round up total_sectors
block: vhdx qemu-iotest - log replay of data sector
block: qemu-iotests for vhdx, add write test support
block: vhdx - update _make_test_img() to filter out vhdx options
block: vhdx - add .bdrv_create() support
block: vhdx - fix comment typos in header, fix incorrect struct fields
block: vhdx - break out code operations to functions
block: vhdx - move more endian translations to vhdx-endian.c
block: vhdx - remove BAT file offset bit shifting
block: vhdx write support
block: vhdx - add log write support
block: vhdx - add region overlap detection for image files
block: vhdx - log parsing, replay, and flush support
block: vhdx code movement - move vhdx_close() above vhdx_open()
block: vhdx - update log guid in header, and first write tracker
block: vhdx - break endian translation functions out
block: vhdx - log support struct and defines
block: vhdx code movement - VHDXMetadataEntries and BDRVVHDXState to header.
block: vhdx - add header update capability.
block: vhdx - minor comments and typo correction.
...
Message-id: 1383905551-16411-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This adds the ability to update the headers in a VHDX image, including
generating a new MS-compatible GUID.
As VHDX depends on uuid.h, VHDX is now a configurable build option. If
VHDX support is enabled, that will also enable uuid as well. The
default is to have VHDX enabled.
To enable/disable VHDX: --enable-vhdx, --disable-vhdx
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The latest configure invocation was saved in config-host.mak and could
be extracted from that file to recreate the configuration.
Now it is saved in a new file config.status which can be directly executed
to recreate the configuration. The file name and the comments were copied
from GNU autoconf.
Makefile now uses config.status, but also includes transitional code
for the old mechanism.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Fam Zheng <famz@redhat.com>
This avoids needing to execute a program and keeping an (incomplete)
list when cross-compiling.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-id: 1372649418-4987-1-git-send-email-vapier@gentoo.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
/iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
=CVfs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony: (39 commits)
ssdt-proc: update generated file
ssdt: fix PBLK length
i386: ACPI table generation code from seabios
pc: use new api to add builtin tables
acpi: add interface to access user-installed tables
hpet: add API to find it
pvpanic: add API to access io port
ich9: APIs for pc guest info
piix: APIs for pc guest info
acpi/piix: add macros for acpi property names
i386: define pc guest info
loader: allow adding ROMs in done callbacks
i386: add bios linker/loader
loader: use file path size from fw_cfg.h
acpi: ssdt pcihp: updat generated file
acpi: pre-compiled ASL files
acpi: add rules to compile ASL source
i386: add ACPI table files from seabios
q35: expose mmcfg size as a property
q35: use macro for MCFG property name
...
Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
In some cases when building with parallelism (make -jN),
build fails because the directory where output files are
supposed to be does not exist. In particular, when make
decides to build virtfs-proxy-helper.1 before other files
in fsdev/, build will fail with the following error:
perl -Ww -- BUILDDIR/scripts/texi2pod.pl BUILDDIR/fsdev/virtfs-proxy-helper.texi fsdev/virtfs-proxy-helper.pod && pod2man --utf8 --section=1 --center=" " --release=" " fsdev/virtfs-proxy-helper.pod > fsdev/virtfs-proxy-helper.1
opening "fsdev/virtfs-proxy-helper.pod": No such file or directory
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Detect presence of IASL compiler and use it
to process ASL source. If not there, use pre-compiled
files in-tree. Add script to update the in-tree files.
Note: distros are known to silently update iasl
so detect correct iasl flags for the installed version on each run as
opposed to at configure time.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Richard Henderson (19) and Paolo Bonzini (2)
# Via Richard Henderson
* rth/tcg-ppc-pull: (21 commits)
tcg-ppc64: Implement CONFIG_QEMU_LDST_OPTIMIZATION
tcg-ppc64: Add _noaddr functions for emitting forward branches
tcg-ppc64: Streamline tcg_out_tlb_read
tcg-ppc64: Implement tcg_register_jit
tcg-ppc64: Handle long offsets better
tcg-ppc64: Tidy register allocation order
tcg-ppc64: Look through a constant function descriptor
tcg-ppc64: Fold constant call address into descriptor load
tcg-ppc64: Don't load the static chain from TCG
tcg-ppc64: Avoid code for nop move
tcg-ppc64: Use tcg_out64
tcg-ppc64: Use TCG_REG_Rn constants
tcg-ppc64: More use of TAI and SAI helper macros
tcg-ppc64: Reformat tcg-target.c
tcg-ppc: Fix and cleanup tcg_out_tlb_check
tcg-ppc: Use conditional branch and link to slow path
tcg-ppc: Cleanup tcg_out_qemu_ld/st_slow_path
tcg-ppc: Avoid code for nop move
tcg-ppc: use new return-argument ld/st helpers
tcg-ppc: fix qemu_ld/qemu_st for AIX ABI
...
Message-id: 1380126458-3247-1-git-send-email-rth@twiddle.net
# By Bandan Das (3) and Gerd Hoffmann (1)
# Via Gerd Hoffmann
* kraxel/audio.1:
audio: remove CONFIG_MIXEMU configure option
hda-codec: make mixemu selectable at runtime
hda-codec: refactor common definitions into a header file
audio maintainers update
Message-id: 1380011943-15083-1-git-send-email-kraxel@redhat.com
# By Stefan Weil (8) and others
# Via Michael Tokarev
* mjt/trivial-patches:
tests/.gitignore: ignore test-throttle
exec: Fix broken build for MinGW (regression)
kvm: Fix compiler warning (clang)
tcg-sparc: Fix parenthesis warning
Makefile: Remove some more files when cleaning
target-i386: Fix segment cache dump
iov: avoid "orig_len may be used unitialized" warning
vscclient: remove unnecessary use of uninitialized variable
trace-events: Clean up with scripts/cleanup-trace-events.pl again
tci: Fix qemu-alpha on 32 bit hosts (wrong assertions)
*-user: Improve documentation for lock_user function
MAINTAINERS: Add missing entry to filelist for TCI target
translate-all: Fix formatting of dump output
*-user: Fix typo in comment (ulocking -> unlocking)
docs: Fix IO port number for CPU present bitmap.
q35: Fix typo in constant DEFUALT -> DEFAULT.
configure: Undefine _FORTIFY_SOURCE prior using it
Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
Currently, we are enforcing the _FORTIFY_SOURCE=2 without any
previous detection if the macro has been already defined, e.g.
by environment, or is just enabled by compiler by default.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The usb-host code has been rewritten for qemu 1.5 to use libusb,
the old code has been left in as temporary fallback. Now we are
two releases further out, targeting the 1.7 release. No major
issues with the new code poped up until now. Time to remove it
from tre tree. Should we ever need it again for some reason --
git has a copy for us in the history.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'gthread' coroutine backend was written before the freelist (aka
pool) existed in qemu-coroutine.c.
This means that every thread is expected to exit when its coroutine
terminates. It is not possible to reuse threads from a pool.
This patch automatically disables the pool when 'gthread' is used. This
allows the 'gthread' backend to work again (for example,
tests/test-coroutine completes successfully instead of hanging).
I considered implementing thread reuse but I don't want quirks like CPU
affinity differences due to coroutine threads being recycled. The
'gthread' backend is a reference backend and it's therefore okay to skip
the pool optimization.
Note this patch also makes it easy to toggle the pool for benchmarking
purposes:
./configure --with-coroutine-backend=ucontext \
--disable-coroutine-pool
Reported-by: Gabriel Kerneis <gabriel@kerneis.info>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Gabriel Kerneis <gabriel@kerneis.info>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This program can do a sendmsg call to transfer fd with unix
socket, which is not supported in python2.
The built binary will not be deleted in clean, but it is a
existing issue in ./tests, which should be solved in another
patch.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* aarch64 preparation patchset (excluding the defconfigs, so this
doesn't actually enable the new targets yet)
* minor bugfixes and cleanups
* disable "-cpu any" in system emulation mode
* fix ARMv7M stack alignment on reset
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=oraU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20130910' into staging
ARM queue:
* aarch64 preparation patchset (excluding the defconfigs, so this
doesn't actually enable the new targets yet)
* minor bugfixes and cleanups
* disable "-cpu any" in system emulation mode
* fix ARMv7M stack alignment on reset
# gpg: Signature made Tue 10 Sep 2013 01:46:11 PM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
# By Alexander Graf (13) and others
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20130910: (28 commits)
configure: Add handling code for AArch64 targets
linux-user: Add AArch64 support
linux-user: Allow targets to specify a minimum uname release
linux-user: Add AArch64 termbits.h definitions
linux-user: Implement cpu_set_tls() and cpu_clone_regs() for AArch64
linux-user: Make sure NWFPE code is 32 bit ARM only
linux-user: Add signal handling for AArch64
linux-user: Fix up AArch64 syscall handlers
linux-user: Add syscall number definitions for AArch64
linux-user: Add cpu loop for AArch64
linux-user: Don't treat AArch64 cpu names specially
target-arm: Add AArch64 gdbstub support
target-arm: Add AArch64 translation stub
target-arm: Prepare translation for AArch64 code
target-arm: Disable 32 bit CPUs in 64 bit linux-user builds
target-arm: Add new AArch64CPUInfo base class and subclasses
target-arm: Pass DisasContext* to gen_set_pc_im()
target-arm: Fix target_ulong/uint32_t confusions
target-arm: Export cpu_env
target-arm: Extract the disas struct to a header file
...
Message-id: 1378839142-7726-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Add the necessary code to configure to handle AArch64 as a target
CPU (we already have some code for supporting it as host). Note
that this doesn't enable the AArch64 targets yet.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-23-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-12-git-send-email-john.rigby@linaro.org
[PMM:
* don't need to set TARGET_ABI_DIR to aarch64 as that is the default
* don't build nwfpe -- this is 32 bit legacy only
* rewrite commit message
* add aarch64 to the list of "fdt required" targets
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds VSS provider and requester as a qga-vss.dll, which is loaded by
Windows VSS service as well as by qemu-ga.
"provider.cpp" implements a basic stub of a software VSS provider.
Currently, this module only relays a frozen event from VSS service to the
agent, and thaw event from the agent to VSS service, to block VSS process
to keep the system frozen while snapshots are taken at the host.
To register the provider to the guest system as COM+ application, the type
library (.tlb) for qga-vss.dll is required. To build it from COM IDL (.idl),
VisualC++, MIDL and stdole2.tlb in Windows SDK are required. This patch also
adds pre-compiled .tlb file in the repository in order to enable
cross-compile qemu-ga.exe for Windows with VSS support.
"requester.cpp" provides the VSS requester to kick the VSS snapshot process.
Qemu-ga.exe works without the DLL, although fsfreeze features are disabled.
These functions are only supported in Windows 2003 or later. In older
systems, fsfreeze features are disabled.
In several versions of Windows which don't support attribute
VSS_VOLSNAP_ATTR_NO_AUTORECOVERY, DoSnapshotSet fails with error
VSS_E_OBJECT_NOT_FOUND. In this patch, we just ignore this error.
To solve this fundamentally, we need a framework to handle mount writable
snapshot on guests, which is required by VSS auto-recovery feature
(cleanup phase after a snapshot is taken).
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
To enable VSS support in qemu-ga for Windows, header files included in
VSS SDK are required.
The VSS support is enabled by the configure option like below:
./configure --with-vss-sdk="/path/to/VSS SDK"
If the path is omitted, it tries to search the headers from default paths
and VSS support is enabled only if the SDK is found.
VSS support is disabled if --without-vss-sdk or --with-vss-sdk=no is
specified.
VSS SDK is available from:
http://www.microsoft.com/en-us/download/details.aspx?id=23490
To cross-compile using mingw, you need to setup the SDK on Windows
environments to extract headers. You can also extract the SDK headers on
POSIX environments using scripts/extract-vss-headers and msitools.
In addition, --with-win-sdk="/path/to/Windows SDK" option is also added to
specify path to Windows SDK, which may be used for native-compile of .tlb
file of qemu-ga VSS provider. However, this is usually unnecessary because
pre-compiled .tlb file is included.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add configuration for C++ compiler in configure and Makefiles.
The C++ compiler is choosed as following:
- ${CXX}, if it is specified.
- ${cross_prefix}g++, if ${cross_prefix} is specified.
- Otherwise, c++ is used.
Currently, usage of C++ language is only for access to Windows VSS
using COM+ services in qemu-guest-agent for Windows.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Micael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
# By Stefan Weil (6) and others
# Via Michael Tokarev
* mjt/trivial-patches:
aio / timers: use g_usleep() not sleep()
adlib: sort offsets in portio registration
qmp: fix integer usage in examples
tci: Remove function tcg_out64 (fix broken build)
target-arm: Report unimplemented opcodes (LOG_UNIMP)
pflash_cfi02.c: fix debug macro
configure: Remove unneeded redirections of stderr (pkg-config --exists)
configure: Remove unneeded redirections of stderr (pkg-config --cflags, --libs)
configure: Don't write .pyc files by default (python -B)
curl: qemu_bh_new() can never return NULL
slirp/arp_table.c: Avoid shifting into sign bit of signed integers
configure: disable clang -Wstring-plus-int warning
rdma: silly ipv6 bugfix
misc: Fix some typos in names and comments
slirp: Port redirection option behave differently on Linux and Windows
Message-id: 1378119695-14568-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Predicate options (--exists, --atleast-version, ...) of pkg-config dont't
print error messages to stderr, so redirecting stderr is not necessary.
Combining a predicate option with --modversion is not necessary for tests.
Instead of testing with --modversion, --exists can be used.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For existing libraries, pkg-config --cflags and pkg-config --libs won't
print error messages to stderr, so redirecting stderr is not necessary.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When a Python script is run, Python normally writes bytecode into a .pyc file.
QEMU's build process uses several Python scripts which are called from
configure or make.
The generated .pyc files take disk space without being of much use, because
those scripts are short, not time critical and only called a few times.
Python's option -B disables writing of .pyc files. QEMU now uses "python -B"
as default, but it is still possible to choose a different call by passing
--python=PYTHON to configure.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some versions of clang will warn about adding integers to strings:
disas/i386.c:4753:23: error: adding 'char' to a string does not append
to the string [-Werror,-Wstring-plus-int]
oappend ("%es:" + intel_syntax);
~~~~~~~^~~~~~~~~~~~~~
disas/i386.c:4753:23: note: use array indexing to silence this warning
oappend ("%es:" + intel_syntax);
^
& [ ]
disas/i386.c uses this idiom to to skip a "%" prefix if using intel
rather than AT&T syntax. This seems like a reasonable thing to do,
and I don't think anybody contributing to QEMU is likely to believe
that '+' is a string concatenation operator in C, so just disable
-Wstring-plus-int.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Where supported, called prctl(PR_SET_TIMERSLACK, 1, ...) to
set one nanosecond timer slack to increase precision of timer
calls.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add qemu_poll_ns which works like g_poll but takes a nanosecond
timeout.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move qemu-ga build check out of if softmmu.. into its own section.
We want to build qemu-ga for _guest_ even if system build isn't
done. It is controlled separately using --enable-guest-agent.
Additionally, give error message if guest agent is requested but
not supported.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The parser handles erroneous input badly. To be improved shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1374939721-7876-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
v2 update:
- set libseccomp 2.1.0 as requirement on configure script.
Since libseccomp 2.0 there's no need to check the architecture type
anymore.
Signed-off-by: Eduardo Otubo <otubo@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1374518017-10424-2-git-send-email-otubo@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* riku/linux-user-for-upstream: (21 commits)
linux-user: Handle compressed ISA encodings when processing MIPS exceptions
linux-user: Unlock mmap_lock when resuming guest from page_unprotect
linux-user: Reset copied CPUs in cpu_copy() always
linux-user: Fix epoll on ARM hosts
linux-user: fix segmentation fault passing with h2g(x) != x
linux-user: Fix pipe syscall return for SPARC
linux-user: Fix target_stat and target_stat64 for OpenRISC
linux-user: Avoid conditional cpu_reset()
configure: Make NPTL non-optional
linux-user: Enable NPTL for x86-64
linux-user: Add i386 TLS setter
linux-user: Clean up handling of clone() argument order
linux-user: Add missing 'break' in i386 get_thread_area syscall
linux-user: Enable NPTL for m68k
linux-user: Enable NPTL for SPARC targets
linux-user: Enable NPTL for OpenRISC
linux-user: Move includes of target-specific headers to end of qemu.h
configure: Enable threading for unicore32-linux-user
configure: Enable threading on all ppc and mips linux-user targets
configure: Don't say target_nptl="no" if there is no linux-user target
...
Conflicts:
linux-user/main.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Code that does need to be visible is kept
well contained inside this file and this is the only
new additional file to the entire patch.
This file includes the entire protocol and interfaces
required to perform RDMA migration.
Also, the configure and Makefile modifications to link
this file are included.
Full documentation is in docs/rdma.txt
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now all linux-user targets support building with NPTL, we can make it
mandatory. This is a good idea because:
* NPTL is no longer new and experimental; it is completely standard
* in practice, linux-user without NPTL is nearly useless for
binaries built against non-ancient glibc
* it allows us to delete the rather untested code for handling
the non-NPTL configuration
Note that this patch leaves the CONFIG_USE_NPTL ifdefs in the
bsd-user codebase alone. This makes no change for bsd-user, since
our configure test for NPTL had a "#include <linux/futex.h>"
which means bsd-user would never have been compiled with
CONFIG_USE_NPTL defined, and it still is not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add x86-64 implementation of cpu_set_tls() (like the kernel, we
just have to call do_arch_prctl() to set FS); this allows us to
enable NPTL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We can easily set the TLS on i386. Add code to do so.
Signed-off-by: Alexander Graf <agraf@suse.de>
[PMM: also remove "target_nptl=no" line from configure, for
consistency with other patches in this series]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For m68k, per-thread data is a purely kernel construct with no
CPU level support. Implement it via a field in the TaskState structure,
used by cpu_set_tls() and the set_thread_area/get_thread_area
syscalls. This allows us to enable compilation with NPTL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Provide the missing cpu_set_tls(), and resolve the FIXME in
cpu_clone_regs() by clearing the carry flag for the child.
This allows us to turn on building with NPTL for SPARC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The OpenRISC kernel ignores CLONE_SETTLS in its copy_thread()
implementation, so a cpu_set_tls() implementation is a no-op.
cpu_clone_regs() was setting the syscall return value in the
wrong register -- it is gpr[11], not gpr[2]. With these two
things fixed, we can compile with NPTL enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
unicore32-linux-user provides cpu_set_tls(), so the failure
to enable target_nptl was presumably an oversight. Enable it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Though threading (target_nptl) was enabled on the base PPC and MIPS
targets, it wasn't enabled for the variants mipsn32, mipsn32el,
mips64, mips64el, ppc64 or ppc46abi32 (probably an oversight).
Enable threading consistently on all these targets.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For architectures with no linux-user target, don't claim no NPTL
support. This has no behavioural change, but it means that we
won't accidentally add a new linux-user target without threading
support in future (because attempting to do so would be a compile
failure rather than a silent lack of support).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Most targets either (a) support threading or (b) don't have a
linux-user/bsd-user target, so make it default to 'yes', with those
targets that don't support threading having to specifically say so.
This is a mechanical no-behaviour-change commit; some of the
"no" entries it adds will be taken out in later patches.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Implement bdrv_aio_discard for gluster.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use pkg-config to determine the version and library dependency
for GlusterFS block driver.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the system has GTK but not libvte, it's more helpful to
tell the user that libvte is missing than to simply say that
GTK is not present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1374162121-31582-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For bsd-user and linux-user emulation modes QEMU needs to be linked at an
alternate .text segment address, so that it's out of the way of the guest
executable. Instead of including modified linker scripts for each arch,
just set the address with -Ttext-segment if supported, or by using sed to
edit the default linker script.
Cc: Ed Maste <emaste@freebsd.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Acked-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-id: 1371867016-7660-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
clang 3.3 with -fsanitize=undefined will fail to link code containing an
int128_t * int128_t multiply (http://llvm.org/bugs/show_bug.cgi?id=16404)
so add this to our configure test for whether [u]int128_t are usable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
error_exit already prepends "ERROR: ", so no need to print it manually.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A number of our softmmu targets (PPC, ARM, Microblaze) now more or
less require flattened device tree support for various board models
to work correctly. Make libfdt mandatory if the target list includes
these, rather than building unhelpful half-functional binaries.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1369409217-7553-2-git-send-email-peter.maydell@linaro.org
Currently QEMU provides a local clone of the file libfdt_env.h in
/include. This file is supposed to come with the libfdt package and is
only needed for broken installs of libfdt. Now that we have submodule
dtc, just ignore these broken installs and prompt for the dtc submodule
install instead. QEMU's local libfdt_env.h is removed accordingly.
Manifests as a bug when building QEMU with modern libfdt. The new
version of libfdt does not compile when QEMUs libfdt_env.h takes
precedence over the hosts.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 9b6a3a52e3f46cfbc1ded9ab56385ec045e46705.1369628289.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Just use the TARGET_NAME free string.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1370349928-20419-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Everything else needs to match the executable name, which is
TARGET_NAME.
Before:
$ sh4eb-linux-user/qemu-sh4eb --help
usage: qemu-sh4 [options] program [arguments...]
Linux CPU emulator (compiled for sh4 emulation)
After:
$ sh4eb-linux-user/qemu-sh4eb --help
usage: qemu-sh4eb [options] program [arguments...]
Linux CPU emulator (compiled for sh4eb emulation)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1370349928-20419-5-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# By Michael Tokarev (4) and others
# Via Michael Tokarev
* mjt/trivial-patches-next: (26 commits)
piix: fix some printf errors when debug is enabled
cputlb: fix debug logs
create qemu_openpty_raw() helper function and move it to a separate file
main-loop: do not include slirp/slirp.h, use libslirp.h instead
libcacard/vscclient: fix leakage of socket on error paths
linux-headers: Update to v3.10-rc5
KVM: PPC: Add dummy kvm_arch_init_irq_routing()
KVM: S390: Add dummy kvm_arch_init_irq_routing()
KVM: ARM: Add dummy kvm_arch_init_irq_routing()
ivshmem: add missing error exit(2)
hw/xen: Use g_free instead of free and fix potential memory leaks
target-sparc: Replace free by g_free
hw/scsi: Don't increment a boolean value
device tree: Fix cppcheck warning
Makefile: Install qemu-img and qemu-nbd man pages only if built
Unbreak -no-quit for GTK, validate SDL options
gtk: implement -full-screen
char/serial: serial_ioport_write: Factor out common code
char/serial: Use generic Fifo8
char/serial: cosmetic fixes.
...
Message-id: 1371207042-17980-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Andreas Färber (12) and others
# Via Andreas Färber
* afaerber/qom-cpu:
spapr_rtas: Abstract rtas_start_cpu() with qemu_get_cpu()
spapr_rtas: Abstract rtas_query_cpu_stopped_state() with qemu_get_cpu()
memory_mapping: Improve qemu_get_guest_memory_mapping() error reporting
dump: Abstract dump_init() with cpu_synchronize_all_states()
cpu: Change default for CPUClass::get_paging_enabled()
dump: Drop qmp_dump_guest_memory() stub and build for all targets
memory_mapping: Drop qemu_get_memory_mapping() stub
cpu: Turn cpu_get_memory_mapping() into a CPUState hook
memory_mapping: Move MemoryMappingList typedef to qemu/typedefs.h
cpu: Turn cpu_paging_enabled() into a CPUState hook
monitor: Simplify do_inject_mce() with qemu_get_cpu()
target-i386: cpu: Fix potential buffer overrun in get_register_name_32()
target-i386: Set level=4 on Conroe/Penryn/Nehalem
target-i386: Update model values on Conroe/Penryn/Nehalem CPU models
pc: Create pc-*-1.6 machine-types
pc: Fix crash when attempting to hotplug CPU with negative ID
dump: Move stubs into libqemustub.a
support compiling on aarch64.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Claudio Fontana <claudio.fontana@huawei.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 51A5C5ED.90103@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
also put aarch64 in the list of archs that do not need an ldscript.
Signed-off-by: Jani Kokkoken <jani.kokkonen@huawei.com>
Signed-off-by: Claudio Fontana <claudio.fontana@huawei.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 51AF40EE.1000104@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nobody uses the CONFIG_ATFILE test now, so just drop it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
Message-id: 1370126121-22975-3-git-send-email-peter.maydell@linaro.org
It hasn't built since FreeBSD 8.x, and is disabled by a patch in the
FreeBSD ports tree. FreeBSD is migrating to QEMU's libusb support.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It was only used in one place (and already expanded in one other).
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qmp_dump_guest_memory() calls dump_init() and returns an Error when
cpu_get_dump_info() returns an error, as done by the stub.
So there is no need to have a stub for qmp_dump_guest_memory().
Enable the documentation of the always-present dump-guest-memory command.
That way we can drop CONFIG_HAVE_CORE_DUMP and leave configure
completely out of the picture for target CPU features.
Signed-off-by: Andreas Färber <afaerber@suse.de>
dump.c:dump_init() never checked for the return code anyway.
If paging is not enabled, it will fall back to an identity map.
If paging is enabled and getting memory mapping list is not
implemented, qemu_get_guest_memory_mapping() will return an error.
Since the targets not implementing memory mapping also don't implement
dump support, we will not reach this code today and can worry about
changing cpu_paging_enabled() default when the need arises.
This allows us to drop CONFIG_HAVE_GET_MEMORY_SUPPORT.
Signed-off-by: Andreas Färber <afaerber@suse.de>
We may want to include a driver in the whitelist for read only tasks
such as diagnosing or exporting guest data (with libguestfs as a good
example). This patch introduces a readonly whitelist option, and for
backward compatibility, the old configure option --block-drv-whitelist
is now an alias to rw whitelist.
Drivers in readonly list is only permitted to open file readonly, and
returns -ENOTSUP for RW opening.
E.g. To include vmdk readonly, and others read+write:
./configure --target-list=x86_64-softmmu \
--block-drv-rw-whitelist=qcow2,raw,file,qed \
--block-drv-ro-whitelist=vmdk
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the user specifies a target list themselves, check each entry
to make sure it's a target we recognise. This allows us to print
a helpful error message, rather than falling through (where we
would probably eventually end up hitting the uninformative
"ERROR: Unsupported target CPU").
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1369062976-301-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Autogenerate the default target list based on what files exist
in default-configs; this allows us to remove one of the places
that has to be kept up to date with a complete list of every
target we support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1369062976-301-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The symlink to "asm" platform linux headers is made in the build tree by
the configure script but gcc is not told to look for them there.
The patch fixes this.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When probing for ncurses, try pkg-config first rather than after
explicit -lncurses and -lcurses. This fixes static linking in the case
that ncurses has additional dependencies, such as -ltinfo (as on FreeBSD).
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The configure script had some code to manipulate config-host.ld~ (i.e.,
a common backup filename), comparing it with the newly-generated file.
I believe the sense of the comparison was backwards.
Since it seemed to serve little purpose anyway, remove it to avoid any
confusion.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We test pkg-config for curses and curl even if those are explicitly
disabled. Move these tests inside `if "$feature" != "no"' sections.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
... because now we can get the dynamic value with
qemu_get_local_state_pathname().
The only user of the fixed value was the guest agent, which we've moved to
qemu_get_local_state_pathname() in the previous patch.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Remove the OSS support for OpenBSD. The OSS API has not been usable
for quite some time.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The latest version of MinGW needs a test for __sync_val_compare_and_swap
to fix a missing symbol linker error.
Reported-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1368301619-32097-2-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 7791dba3ec broke compilation on MacOSX, because it introduced
a new include of util.h. On MacOSX this includes pwd.h which in turn
includes the system uuid/uuid.h, which causes a compile failure if
QEMU was configured without CONFIG_UUID due to a conflict between
the system header and our fallback versions:
block/vdi.c:124:20: error: static declaration of 'uuid_generate'
follows non-static declaration
static inline void uuid_generate(uuid_t out)
^
/usr/include/uuid/uuid.h:63:6: note: previous declaration is here
void uuid_generate(uuid_t out);
^
Fix this breakage by improving configure's check for uuid to work on
MacOSX (where there is no need to link in a separate libuuid).
Note that if the user explicitly runs configure with '--disable-uuid'
on MacOSX then QEMU will fail to compile.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1368563799-22755-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Cast debugging can have a substantial cost (20% or more). Instead of adding
special-cased "fast casts" in the hot paths, we can just disable it in
releases. The tracing facilities we just added make it easier to analyze
those problems that cast debugging would reveal.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368188203-3407-7-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For *.img files, there will be a link created directly to the src folder,
like for all other blobs.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The "libtool" binary on MacOSX is not GNU libtool, and doesn't support
anything like the same set of command line options. Test whether we
have accidentally picked this up (by looking for whether it handles
the GNU --version switch), and discard it if so. The fallback machinery
for the "we don't have a libtool" case will work fine. This fixes a
failure in "make install" on MacOSX.
Reported-by: Peter Cheung <mcheung63@hotmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1367701071-6630-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a ftrace tracing backend which sends trace event to
ftrace marker file. You can effectively compare qemu trace data and
kernel(especially, kvm.ko when using KVM) trace data.
The ftrace backend is restricted to Linux only.
To try out the ftrace backend:
$ ./configure --trace-backend=ftrace
$ make
if you use KVM, enable kvm events in ftrace:
# sudo echo 1 > /sys/kernel/debug/tracing/events/kvm/enable
After running qemu by root user, you can get the trace:
# cat /sys/kernel/debug/tracing/trace
Signed-off-by: Eiichi Tsukata <eiichi.tsukata.xh@hitachi.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
openSUSE 12.3 has seccomp.h in /usr/include/libseccomp-1.0.1,
so add `pkg-config --cflags libseccomp` output to QEMU_CFLAGS.
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
