Drop the use of legacy options in favor of the SocketAddress
representation, even for internal use (i.e. for storing the result of
the filename parsing).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new option "server" to the NBD block driver which accepts a
SocketAddress.
"path", "host" and "port" are still supported as legacy options and are
mapped to their corresponding SocketAddress representation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Right now, we have four possible options that conflict with specifying
an NBD filename, and a future patch will add another one ("address").
This future option is a nested QDict that is flattened at this point,
requiring us to test each option whether its key has an "address."
prefix. Therefore, we will then need to iterate through all options
(including the "export" option which was not covered so far).
Adding this iteration logic now will simplify adding the new option
later. A nice side effect is that the user will not receive a long list
of five options which are not supposed to be specified with a filename,
but we can actually print the problematic option.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of inlining this nice macro (i.e. resorting to
qdict_put_obj(..., QOBJECT(...))), use it.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of not emitting the port in nbd_refresh_filename(), just set it
to the default if the user did not specify it. This makes the logic a
bit simpler.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, a port that is passed along with a UNIX socket path is
silently ignored. That is not exactly ideal, it should be an error
instead.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 076003f5 added configuration for NFS with IMGOPTSSYNTAX enabled,
but it didn't use the right variable name: $TEST_DIR_OPTS doesn't exist.
This fixes the mistake.
However, this doesn't make anything work that was broken before: The
only way to get IMGOPTSSYNTAX is with -luks, but the combination of
-luks and -nfs doesn't get qemu-img create commands right (because
qemu-img create doesn't support --image-opts yet), so even after this
fix some more work would be required to make the tests pass.
Reported-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's the simpler interface to use for the raw format driver.
Apart from that, this removes the last user of the AIO emulation
implemented by bdrv_aio_ioctl().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This allows drivers to implement ioctls in a coroutine-based way.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Instead of letting raw-posix use the bdrv_ioctl() abstraction to issue
an ioctl to itself, just call ioctl() directly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
All read/write functions already have a single coroutine-based function
on the BlockBackend level through which all requests go (no matter what
API style the external caller used) and which passes the requests down
to the block node level.
This patch exports a bdrv_co_ioctl() function and uses it to extend this
mode of operation to ioctls.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
All read/write functions already have a single coroutine-based function
on the BlockBackend level through which all requests go (no matter what
API style the external caller used) and which passes the requests down
to the block node level.
This patch extends this mode of operation to discards.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
All read/write functions already have a single coroutine-based function
on the BlockBackend level through which all requests go (no matter what
API style the external caller used) and which passes the requests down
to the block node level.
This patch extends this mode of operation to flushes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJYEBKaAAoJEO8Ells5jWIR4jQH/3HgiWHs9+iQrUjo8DXrbF1b
Dkdg8B66yYRirwR4KeCVJqOMnscPotISJc47MveoU+CxAwRcmhVtPuH+gZ7MLggp
IrFT9XNo4WhSBlOc1tr/qGyGGgzzkWbcKKBfD3dK049XDcXPm7A3hNshqitf6YJI
ILnlVk0ttKP7PKd6pvwaH+8yNDqcCr4+Rk6uSgOAB4N416+N/zk2AwQGWbMgLSzZ
zBRu95K/7UvRRoyyqR4kxTRGhfNdEqWeOXXISRmTBfBM+iK6W3uaeWSy5ka9QTdo
yXwcwxVe9iBxMuR3sZqNAbi5EbQIBtQSI2echG4bCQwvwjEAw9LUOhnJ44XkTfE=
=GoQg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Wed 26 Oct 2016 03:19:06 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
colo-proxy: fix memory leak
net: rtl8139: limit processing of ring descriptors
net: vmxnet: initialise local tx descriptor
e1000e: Don't zero out buffer address in rx descriptor
net: rocker: set limit to DMA buffer size
net: eepro100: fix memory leak in device uninit
tap-bsd: OpenBSD uses tap(4) now
net: pcnet: fix source formatting and indentation
net: pcnet: check rx/tx descriptor ring length
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Emulating LL/SC with cmpxchg is not correct, since it can
suffer from the ABA problem. However, portable parallel
code is written assuming only cmpxchg which means that in
practice this is a viable alternative.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Rather than using helpers for physical accesses, use a mmu index.
The primary cleanup is with store-conditional on physical addresses.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The exception is not emitted anymore; remove it and the associated
TCG variables.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1467054136-10430-31-git-send-email-cota@braap.org>
The exception is not emitted anymore.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1467054136-10430-30-git-send-email-cota@braap.org>
The exception is not emitted anymore.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twidle.net>
Message-Id: <1467054136-10430-29-git-send-email-cota@braap.org>
Stop specializing on TARGET_LONG_BITS == 32; unconditionally allocate
a temp and expand with tcg_gen_extu_i32_tl. Split out gen_aa32_addr,
gen_aa32_frob64, gen_aa32_ld_i32 and gen_aa32_st_i32 as separate interfaces.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
With this microbenchmark we can measure the overhead of emulating atomic
instructions with a configurable degree of contention.
The benchmark spawns $n threads, each performing $o atomic ops (additions)
in a loop. Each atomic operation is performed on a different cache line
(assuming lines are 64b long) that is randomly selected from a range [0, $r).
[ Note: each $foo corresponds to a -foo flag ]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1467054136-10430-20-git-send-email-cota@braap.org>
[rth: Move load of reg value to common location.]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1467054136-10430-17-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
[rth: Move redundant qemu_load out of cmpxchg loop.]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1467054136-10430-16-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
[rth: Avoid qemu_load that's redundant with the atomic op.]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1467054136-10430-15-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
[rth: Merge gen_inc_locked back into gen_inc to share cc update.]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1467054136-10430-14-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The diff here is uglier than necessary. All this does is to turn
FOO
into:
if (s->prefix & PREFIX_LOCK) {
BAR
} else {
FOO
}
where FOO is the original implementation of an unlocked cmpxchg.
[rth: Adjust unlocked cmpxchg to use movcond instead of branches.
Adjust helpers to use atomic helpers.]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1467054136-10430-6-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Allow qemu to build on 32-bit hosts without 64-bit atomic ops.
Even if we only allow 32-bit hosts to multi-thread emulate 32-bit
guests, we still need some way to handle the 32-bit guest using a
64-bit atomic operation. Do so by dropping back to single-step.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Force the use of cmpxchg16b on x86_64.
Wikipedia suggests that only very old AMD64 (circa 2004) did not have
this instruction. Further, it's required by Windows 8 so no new cpus
will ever omit it.
If we truely care about these, then we could check this at startup time
and then avoid executing paths that use it.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Add all of cmpxchg, op_fetch, fetch_op, and xchg.
Handle both endian-ness, and sizes up to 8.
Handle expanding non-atomically, when emulating in serial.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
TGT_LE and TGT_BE are not size dependent and do not need to be
redefined. The others are no longer used at all.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Saves 2k code size off of a cold path.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We already include exec/address-spaces.h and exec/memory.h in
cputlb.c; the include of qemu/timer.h appears to be a fossil.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The variable parallel_cpus controls the generation of thread aware
atomic code. We only need to set it once we clone our first thread.
At this point any existing translations need to be thrown away.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When we cannot emulate an atomic operation within a parallel
context, this exception allows us to stop the world and try
again in a serial context.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
