The code already checks iommu_mr is not NULL so there is no
need to check container_of() is not NULL. Remove the check.
Fixes: CID 1523901
Fixes: 09b4c3d6a2 ("virtio-iommu: Record whether a probe request has
been issued")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Coverity (CID 1523901)
Message-Id: <20231109170715.259520-1-eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
`kvm_enabled()` is compiled down to `0` and short-circuit logic is
used to remove references to undefined symbols at the compile stage.
Some build configurations with some compilers don't attempt to
simplify this logic down in some cases (the pattern appears to be
that the literal false must be the first term) and this was causing
some builds to emit references to undefined symbols.
An example of such a configuration is clang 16.0.6 with the following
configure: ./configure --enable-debug --without-default-features
--target-list=x86_64-softmmu --enable-tcg-interpreter
Signed-off-by: Daniel Hoffman <dhoff749@gmail.com>
Message-Id: <20231119203116.3027230-1-dhoff749@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
erst_realizefn() passes @errp to functions without checking for
failure. If it runs into another failure, it trips error_setv()'s
assertion.
Use the ERRP_GUARD() macro and check *errp, as suggested in commit
ae7c80a7bd ("error: New macro ERRP_GUARD()").
Cc: qemu-stable@nongnu.org
Fixes: f7e26ffa59 ("ACPI ERST: support for ACPI ERST feature")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231120130017.81286-1-philmd@linaro.org>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
g_new() aborts if the allocation fails so it returns NULL only if the
requested allocation size is zero. register_vfs() makes such an
allocation if NumVFs is zero so it should not assert that g_new()
returns a non-NULL value.
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Buglink: https://issues.redhat.com/browse/RHEL-17209
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231123075630.12057-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Yanghang Liu<yanghliu@redhat.com>
Reviewed-by: Cédric Le Goater <<a href="mailto:clg@redhat.com" target="_blank">clg@redhat.com</a>><br>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU crashes on exit when a virtio-sound device has failed to
realise. Its vmstate field was not cleaned up properly with
qemu_del_vm_change_state_handler().
This patch changes the realize() order as
1. Validate the given configuration values (no resources allocated
by us either on success or failure)
2. Try AUD_register_card() and return on failure (no resources allocated
by us on failure)
3. Initialize vmstate, virtio device, heap allocations and stream
parameters at once.
If error occurs, goto error_cleanup label which calls
virtio_snd_unrealize(). This cleans up all resources made in steps
1-3.
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Fixes: 2880e676c0 ("Add virtio-sound device stub")
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231116072046.4002957-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
AUD_register_card might fail. Even though errp was passed as an
argument, the call's return value was not checked for failure.
Fixes: Coverity CID 1523899
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231109162034.2108018-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit b7639b7dd0 ("hw/audio: Simplify hda audio init") inverted
the sense of hda codec property mixer during initialization.
Change the code so that mixer=on enables the hda mixer emulation
and mixer=off disables the hda mixer emulation.
With this change audio playback and recording streams don't start
muted by default.
Fixes: b7639b7dd0 ("hw/audio: Simplify hda audio init")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20231105172552.8405-2-vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After a relatively short time, there is an multiplication overflow
when multiplying (now - buft_start) with hda_bytes_per_second().
While the uptime now - buft_start only overflows after 2**63 ns
= 292.27 years, this happens hda_bytes_per_second() times faster
with the multiplication. At 44100 samples/s * 2 channels
* 2 bytes/channel = 176400 bytes/s that is 14.52 hours. After the
multiplication overflow the affected audio stream stalls.
Replace the multiplication and following division with muldiv64()
to prevent a multiplication overflow.
Fixes: 280c1e1cdb ("audio/hda: create millisecond timers that handle IO")
Reported-by: M_O_Bz <m_o_bz@163.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20231105172552.8405-1-vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio sound device is currently an unclassified PCI device.
~> sudo lspci -s '00:02.0' -v -nn | head -n 2
00:02.0 Unclassified device [00ff]:
Red Hat, Inc. Device [1af4:1059] (rev 01)
Subsystem: Red Hat, Inc. Device [1af4:1100]
Set the correct PCI class code to change the device to a
multimedia audio controller.
~> sudo lspci -s '00:02.0' -v -nn | head -n 2
00:02.0 Multimedia audio controller [0401]:
Red Hat, Inc. Device [1af4:1059] (rev 01)
Subsystem: Red Hat, Inc. Device [1af4:1100]
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20231107185034.6434-1-vr_qemu@t-online.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When dumping table blobs using rebuild-expected-aml.sh, table blobs from all
test variants are dumped regardless of whether there are any actual changes to
the tables or not. This creates lot of new files for various test variants that
are not part of the git repository. This is because we do not check in all table
blobs for all test variants into the repository. Only those blobs for those
variants that are different from the generic test-variant agnostic blob are
checked in.
This change makes the test smarter by checking if at all there are any changes
in the tables from the checked-in gold master blobs and take actions
accordingly.
When there are no changes:
- No new table blobs would be written.
- Existing table blobs will be refreshed (git diff will show no changes).
When there are changes:
- New table blob files will be dumped.
- Existing table blobs will be refreshed (git diff will show that the files
changed, asl diff will show the actual changes).
When new tables are introduced:
- Zero byte empty file blobs for new tables as instructed in the header of
bios-tables-test.c will be regenerated to actual table blobs.
This would make analyzing changes to tables less confusing and there would
be no need to clean useless untracked files when there are no table changes.
CC: peter.maydell@linaro.org
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20231107044952.5461-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
One problem with flaky tests is they often only fail under CI
conditions which makes it hard to debug. We add an optional allow_fail
job so developers can trigger the only the flaky tests in the CI
environment if they are debugging.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-8-alex.bennee@linaro.org>
We inadvertently built the LE target for BE tests.
Fixes: 78ebc00b06 (gitlab: shuffle some targets and reduce avocado noise)
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-7-alex.bennee@linaro.org>
As firmware runs at a higher privilege level than the hypervisor we
can only run these tests under TCG emulation.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-6-alex.bennee@linaro.org>
migrate_uri_parse() allocates memory to 'channel' if the user
opts for old syntax - uri, which is leaked because there is no
code for freeing 'channel'.
So, free channel to avoid memory leak in case where 'channels'
is empty and uri parsing is required.
Fixes: 5994024f ("migration: Implement MigrateChannelList to qmp migration flow")
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Link: https://lore.kernel.org/r/20231129204301.131228-1-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
It doesn't make sense to have two classes of flaky tests. While it may
take the constrained environment of CI to trigger failures easily it
doesn't mean they don't occasionally happen on developer machines. As
CI is the gating factor to passing there is no point developers
running the tests locally anyway unless they are trying to fix things.
While we are at it update the language in the docs to discourage the
QEMU_TEST_FLAKY_TESTS becoming a permanent solution.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-3-alex.bennee@linaro.org>
The gdb description GDB_SIGNAL_IO is "I/O possible" and by default gdb
will try and restart the guest, getting us nowhere. Report
GDB_SIGNAL_STOP instead which should at least halt the session at the
failure point.
Reviewed-by: Luis Machado <luis.machado@arm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-2-alex.bennee@linaro.org>
netdev test keeps failing sometimes.
I don't think we should increase the timeout some more:
let's try something else instead, testing how busy the
system is.
Seems to work for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
getloadavg is supported on Linux, BSDs, Solaris.
Following man page:
RETURN VALUE
If the load average was unobtainable, -1 is returned; otherwise,
the number of samples actually retrieved is returned.
accordingly, make stub for systems which don't support this function return -1
for consistency.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
require out of tree binary blob.
* SLOF update to fix virtio serial bugs.
-----BEGIN PGP SIGNATURE-----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=7rvy
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-for-8.2-20231130' of https://gitlab.com/npiggin/qemu into staging
* Add a default BIOS for the new amigaone machine so it does not
require out of tree binary blob.
* SLOF update to fix virtio serial bugs.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmVof8kACgkQZ7MCdqhi
# HK71ng//TCpoi02/aZY5kAd1a1NxvRDd/gR9d5y79TaixgJ9FoV7joNg7Labu21r
# Gezghpgj7Ph+Wy175/qYhIJJ6JheK6xsAb7JmCJUq5HeOixJHkK0xHCJ0uGf1tcb
# c24+6JYa7K1Yd48EhGQUDwd+7J7QeAKPyJLSZHG2Qg9+sPX2koxa9tzZMoaWoA2L
# pMfXhUTBiK6Q93FtrQw16pRUcGrY542wLeA/nRaUFtuPdv38TDmJ4ktnid27fIh5
# 1+QVGQD0HCO29SVT/VP1TJenJukrYVjBfT8ulVC/wo53tZHhNSDVffXbRijrVFlX
# CPowJ2UebPwpvnvv8F8CSGPL4XPI+IBVdUOwZZMkH5oGaMXQW6mP4zsB7TK+g5z3
# 8+hQ0VZS0MzrrfSqufup8SUJAqJ1Sckx104clrpXtrBSAoiF634Qi1+UurwDVLFS
# VibKnMl31LauNRIWXVfj4BYOdH9oHOEHR5ghoaRguOAe58N7fGNiXC/WnScWbp8r
# PXE9D7SUMPtxNejDFRam+Df7JwTY+CdB56uvZ/behgs3FABfMmqBX+WgBbNhLaP4
# B4Wa0MTOAHz3itXRHYtvd6n3M9ts4nU88Srkuf0akAzp4Nv4b3+isuIncUazDREt
# q2z94oolhuZarLhsi/8Qo2G/SfJBNM0s4fmx4NTrqscupl5SadM=
# =7rvy
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 30 Nov 2023 07:27:53 EST
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-8.2-20231130' of https://gitlab.com/npiggin/qemu:
ppc/amigaone: Allow running AmigaOS without firmware image
pseries: Update SLOF firmware image
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Hi
In this pull request:
- fix form p-ioc set too soon
- free 'saddr' at the right time
Please, apply.
CI: https://gitlab.com/juan.quintela/qemu/-/pipelines/1090495323
-----BEGIN PGP SIGNATURE-----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=5Img
-----END PGP SIGNATURE-----
Merge tag 'migration-20231130-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request (20231130)
Hi
In this pull request:
- fix form p-ioc set too soon
- free 'saddr' at the right time
Please, apply.
CI: https://gitlab.com/juan.quintela/qemu/-/pipelines/1090495323
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmVoZrgACgkQ9IfvGFhy
# 1yOS6BAA2Rag1bz2yrI/Gts+J/+pVu3a8AZh0lu8J5nABkFSGwrQ5RfVuSuq1Cwt
# j9uctmt9qAEbbLeFsTf/CYCxO4R1RDhOw78o7YfPZPiUFOAvuZB+gHCGA+NH1YH7
# a8uzh/yQ0wSQSKrkFHKV7A1Kli7k6c8iYo3v9ibJDqphUpOfjSPLB22hmRqRp/gy
# 2ZQH/mxj9xlkYxQ/WUKVVl3weXbshbniuQ3RM3HnZYzzWlam4PjI+rAyAF6jhmf6
# ReKDm4n55jTNZXXd9Wa5PZQ7g55BwO1suJfGeojJGsdgfqsFXf/TTwRdmvxOMg/V
# 5X/Eo8GxMF2Vf3pul/m3eNmKvlP0Bh+VlN8dF+Ii8ZXawOEsJpXcCE2yNpXn4UqP
# nyaTznnel2QCDMNWaQNHVbGXFc+n5ocwEnDmO5Idwp5W3/+MFM+xP05FpnshpR0h
# 1vq5dUO/mq5jIoYK//iIXe99rHoIJlOP6SRdtTyxRBhJLg76YKRYmF3RaU51B9n4
# qWLWhDQBwbdv0ZEPZIAhDlO5grY9BRQT5aGNLRsLWL0rY4nJtYdVv8/MyISlNCD8
# eY8SOB0cs/vaLG7Nfj0tboXMAh5sPCXxqx25pVf+x+09EJhD1VZ+axTjbnJmRTs/
# nL5tmQ2EPvFzoVzxeOHdEK+jXdJYWBZf6LBlPY1HN+Gt3JjIecE=
# =5Img
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 30 Nov 2023 05:40:56 EST
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20231130-pull-request' of https://gitlab.com/juan.quintela/qemu:
migration: free 'saddr' since be no longer used
migration/multifd: Stop setting p->ioc before connecting
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The machine uses a modified U-Boot under GPL license but the sources
of it are lost with only a binary available so it cannot be included
in QEMU. Allow running without the firmware image which can be used
when calling a boot loader directly and thus simplifying booting
guests. We need a small routine that AmigaOS calls from ROM which is
added in this case to allow booting AmigaOS without external firmware
image.
Fixes: d9656f860a ("hw/ppc: Add emulation of AmigaOne XE board")
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
It's been a while. This fixes compile warning, typos and
a bug with virtio-serial being used after it was shutdown
at "quiesce".
The full changelog is here:
Alexey Kardashevskiy (2):
Remove ?PICK
version: update to 20230918
Jordan Niethe (1):
virtio-serial: Do not close stdout on quiesce
Kautuk Consul (1):
virtio-serial: Make read and write methods report failure
Thomas Huth (10):
lib/libnet/ipv6: Silence compiler warning from Clang
Fix typos in the board-qemu folder
Fix typos in the lib/libnet folder
Fix typos in the remaining lib folders
Fix typos in the slof folder
Fix typos in the board-js2x folder
Fix typos in the llfw folder
Fix typos in the board-js2x folder
Fix typos in the clients folder
Fix remaining typos in various folders
Compiled with gcc-12.1.0-nolibc
Tested with (sorry, no KVM):
/home/aik/b/q-slof/qemu-system-ppc64 \
-nodefaults \
-chardev stdio,id=STDIO0,signal=off,mux=on \
-device spapr-vty,id=svty0,reg=0x71000110,chardev=STDIO0 \
-mon id=MON0,chardev=STDIO0,mode=readline \
-nographic \
-vga none \
-m 2G \
-kernel /home/aik/t/vml4150le \
-initrd /home/aik/t/le.cpio \
-machine pseries,cap-cfpc=broken,cap-sbbc=broken,cap-ibs=broken,cap-ccf-assist=off \
-bios pc-bios/slof.bin \
-trace events=/home/aik/qemu_trace_events \
-d guest_errors \
-chardev socket,id=SOCKET0,server=on,wait=off,path=qemu.mon.604650 \
-mon chardev=SOCKET0,mode=control \
-name 604650,debug-threads=on
[ npiggin: Also tested with KVM, including with virtio-console. ]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Since socket_parse() will allocate memory for 'saddr',and its value
will pass to 'addr' that allocated by migrate_uri_parse(),
then 'saddr' will no longer used,need to free.
But due to 'saddr->u' is shallow copying the contents of the union,
the members of this union containing allocated strings,and will be used after that.
So just free 'saddr' itself without doing a deep free on the contents of the SocketAddress.
Fixes: 72a8192e22 ("migration: convert migration 'uri' into 'MigrateAddress'")
Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231120031428.908295-1-zhouzongmin@kylinos.cn>
This is being shadowed but the assignments at
multifd_channel_connect() and multifd_tls_channel_connect() .
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20231110200241.20679-2-farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Return default value in legacy mode for BAR4 when unset. This can't be
set in reset method because BARs are cleared on reset so we return it
instead when BARs are read in legacy mode. This fixes UDMA on amigaone
with AmigaOS.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <20231125140135.AF6A075A4C3@zero.eik.bme.hu>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The vhost-user-blk export implement AioContext switches in its drain
implementation. This means that on drain_begin, it detaches the server
from its AioContext and on drain_end, attaches it again and schedules
the server->co_trip coroutine in the updated AioContext.
However, nothing guarantees that server->co_trip is even safe to be
scheduled. Not only is it unclear that the coroutine is actually in a
state where it can be reentered externally without causing problems, but
with two consecutive drains, it is possible that the scheduled coroutine
didn't have a chance yet to run and trying to schedule an already
scheduled coroutine a second time crashes with an assertion failure.
Following the model of NBD, this commit makes the vhost-user-blk export
shut down server->co_trip during drain so that resuming the export means
creating and scheduling a new coroutine, which is always safe.
There is one exception: If the drain call didn't poll (for example, this
happens in the context of bdrv_graph_wrlock()), then the coroutine
didn't have a chance to shut down. However, in this case the AioContext
can't have changed; changing the AioContext always involves a polling
drain. So in this case we can simply assert that the AioContext is
unchanged and just leave the coroutine running or wake it up if it has
yielded to wait for the AioContext to be attached again.
Fixes: e1054cd4aa
Fixes: https://issues.redhat.com/browse/RHEL-1708
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231127115755.22846-1-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the text description file is larger than DESC_SIZE, we force the last
byte in the buffer to be 0 and write it out.
This results in a corruption.
Try to allocate a big buffer in this case.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1923
Signed-off-by: Fam Zheng <fam@euphon.net>
Message-ID: <20231124115654.3239137-1-fam@euphon.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The machine type is being detected based on "-M help" output, and we're
searching for the line ending with " (default)". However, in downstream
one of the machine types s marked as deprecated might become the
default, in which case this logic breaks as the line would now end with
" (default) (deprecated)". To fix potential issues here, let's relax
that requirement and detect the mere presence of " (default)" line
instead.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Message-ID: <20231122121538.32903-1-andrey.drobyshev@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
From s390_possible_cpu_arch_ids() in hw/s390x/s390-virtio-ccw.c, the
"core-id" is the index of possible_cpus->cpus[], so it should only be
less than possible_cpus->len, which is equal to ms->smp.max_cpus.
Fix the wrong "core-id" 112, because it isn't less than maxcpus (36) in
-smp, and the valid core ids are 0-35 inclusive.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231127134917.568552-1-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The current implementation initializes the stack pointer of AVR devices
to 0. Although older AVR devices used to be like that, newer ones set
it to RAMEND.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1525
Signed-off-by: Gihun Nam <gihun.nam@outlook.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <PH0P222MB0010877445B594724D40C924DEBDA@PH0P222MB0010.NAMP222.PROD.OUTLOOK.COM>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This device is a function of VIA south bridge and should allow setting
interrupt routing within that chip. This is implemented in
via_isa_set_irq().
Fixes: eb604411a7
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <5329840e4be6dd8ae143d07cbfe61d8d2d106654.1701035944.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The chip has 4 pins (called PIRQA-D in VT82C686B and PINTA-D in
VT8231) that are meant to be connected to PCI IRQ lines and allow
routing PCI interrupts to the ISA PIC. Route these in
via_isa_set_irq() to make it possible to share them with internal
functions that can also be routed to the same ISA IRQs.
Fixes: 2fdadd02e6
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <8c4513d8b78fac40e6d4e65a0a4b3a7f2f278a4b.1701035944.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This device is part of a superio/ISA bridge chip and IRQs from it are
routed to an ISA interrupt. Use via_isa_set_irq() function to implement
this in a vt82c686-uhci-pci specific irq handler.
This reverts commit 422a6e8075.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <ed5cdeaba7cf01eebdaa35f84c63427f4d8876b1.1701035944.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The VIA integrated south bridge chips combine several functions and
allow routing their interrupts to any of the ISA IRQs also allowing
multiple sources to share the same ISA IRQ. E.g. pegasos2 firmware
configures everything to use IRQ 9 but amigaone routes them to
separate ISA IRQs so the current simplified routing does not work.
Bring back via_isa_set_irq() and change it to take the component that
wants to change an IRQ and keep track of interrupt status of each
source separately and do the mapping to ISA IRQ within the ISA bridge.
This may not handle cases when an ISA IRQ is controlled by devices
directly, not going through via_isa_set_irq() such as serial, parallel
or keyboard but these IRQs being conventionally fixed are not likely
to be change by guests or share with other devices so this does not
cause a problem in practice.
This reverts commit 4e5a20b6da.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <1c3902d4166234bef0a476026441eaac3dd6cda5.1701035944.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This file is the only one involved in the compilation process which
still uses the /bin/bash path.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-ID: <20231123211506.636533-1-sam@rfc1149.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
With the introduction of list-based array properties in qdev, the string
output visitor has to deal with lists of non-integer elements now ('info
qtree' prints all properties with the string output visitor).
Currently there is no explicit support for such lists, and the resulting
output is only the last element because string_output_set() always
replaces the output with the latest value. Instead of replacing the old
value, append comma separated values in list context.
The difference can be observed in 'info qtree' with a 'rocker' device
that has a 'ports' list with more than one element.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231121173416.346610-3-kwolf@redhat.com>
Passing an uninitialised list to visit_start_list() happens to work for
the QObject output visitor because it treats the pointer as an opaque
value and never dereferences it, but the string output visitor expects a
valid list to check if it has more than one element.
The existing code crashes with the string output visitor if the
uninitialised value is non-NULL. Passing an explicit NULL would fix the
crash, but still result in wrong output.
Rework get_prop_array() so that it conforms to the expectations that the
string output visitor has. This includes building a real list first and
using visit_next_list() to iterate it.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1993
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Dan Hoffman <dhoff749@gmail.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231121173416.346610-2-kwolf@redhat.com>
UG1087 states for the source channel that: if SIZE is programmed to 0, and the
DMA is started, the interrupts DONE and MEM_DONE will be asserted.
This implies that it is allowed for the guest to stop the source DMA by writing
a size of 0 to the SIZE register, so remove the LOG_GUEST_ERROR in that case.
While at it remove the comment marking the SIZE register as write-only.
See: https://docs.xilinx.com/r/en-US/ug1087-zynq-ultrascale-registers/CSUDMA_SRC_SIZE-CSUDMA-Register
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20231124143505.1493184-4-fkonrad@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It seems that the url changed a bit, and it triggers an error. Fix the URLs so
the documentation can be reached again.
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20231124143505.1493184-3-fkonrad@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The spips, qspips, and zynqmp-qspips share the same realize function
(xilinx_spips_realize) and initialize their io memory region with different
mmio_ops passed through the class. The size of the memory region is set to
the largest area (0x200 bytes for zynqmp-qspips) thus it is possible to write
out of s->regs[addr] in xilinx_spips_write for spips and qspips.
This fixes that wrong behavior.
Reviewed-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20231124143505.1493184-2-fkonrad@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 0be6bfac62 ("qdev: Implement variable length array properties")
added the DEFINE_PROP_ARRAY() macro with the following comment:
* It is the responsibility of the device deinit code to free the
* @_arrayfield memory.
Commit a75f336b97 added:
DEFINE_PROP_ARRAY("keycodes", StellarisGamepad, num_buttons,
keycodes, qdev_prop_uint32, uint32_t),
but forgot to free the 'keycodes' array. Do it in the instance_finalize
handler.
Fixes: a75f336b97 ("hw/input/stellaris_input: Convert to qdev")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231121174051.63038-7-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 0be6bfac62 ("qdev: Implement variable length array properties")
added the DEFINE_PROP_ARRAY() macro with the following comment:
* It is the responsibility of the device deinit code to free the
* @_arrayfield memory.
Commit 9e4aa1fafe added:
DEFINE_PROP_ARRAY("pg0-lock",
XlnxVersalEFuseCtrl, extra_pg0_lock_n16,
extra_pg0_lock_spec, qdev_prop_uint16, uint16_t),
but forgot to free the 'extra_pg0_lock_spec' array. Do it in the
instance_finalize() handler.
Cc: qemu-stable@nongnu.org
Fixes: 9e4aa1fafe ("hw/nvram: Xilinx Versal eFuse device") # v6.2.0+
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231121174051.63038-6-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 0be6bfac62 ("qdev: Implement variable length array properties")
added the DEFINE_PROP_ARRAY() macro with the following comment:
* It is the responsibility of the device deinit code to free the
* @_arrayfield memory.
Commit 68fbcc344e added:
DEFINE_PROP_ARRAY("read-only", XlnxEFuse, ro_bits_cnt, ro_bits,
qdev_prop_uint32, uint32_t),
but forgot to free the 'ro_bits' array. Do it in the instance_finalize
handler.
Cc: qemu-stable@nongnu.org
Fixes: 68fbcc344e ("hw/nvram: Introduce Xilinx eFuse QOM") # v6.2.0+
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231121174051.63038-5-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
