The frame parameter has been removed along with the support for
SDL 1.2.
Fixes: 09bd7ba9f5 ("Remove deprecated -no-frame option")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Libvirt's "domcapabilities" command has a way to state whether certain
graphic frontends are available in QEMU or not. Originally, libvirt
looked at the "--help" output of the QEMU binary to determine whether
SDL was available or not (by looking for the "-sdl" parameter in the
help text), but since libvirt stopped doing this analysis of the help
text, the detection of SDL is currently broken, see:
https://bugzilla.redhat.com/show_bug.cgi?id=1790902
QEMU should provide a way via the QMP interface instead. A simple way,
without introducing additional commands, is to make the DisplayType
enum entries conditional, so that the enum only contains the entries if
the corresponding CONFIG_xxx switches have been set. This of course
only gives an indication which possibilities have been enabled during
compile-time of QEMU (and does not take into account whether modules
are later available or not for example - for this we'd need a separate
command), but anyway, this should already be good enough for the above
bug ticket, and it's a good idea anyway to make the QMP interface
conditional here, so let's simply do it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210615090439.70926-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Let's support RAM_NORESERVE via MAP_NORESERVE on Linux. The flag has no
effect on most shared mappings - except for hugetlbfs and anonymous memory.
Linux man page:
"MAP_NORESERVE: Do not reserve swap space for this mapping. When swap
space is reserved, one has the guarantee that it is possible to modify
the mapping. When swap space is not reserved one might get SIGSEGV
upon a write if no physical memory is available. See also the discussion
of the file /proc/sys/vm/overcommit_memory in proc(5). In kernels before
2.6, this flag had effect only for private writable mappings."
Note that the "guarantee" part is wrong with memory overcommit in Linux.
Also, in Linux hugetlbfs is treated differently - we configure reservation
of huge pages from the pool, not reservation of swap space (huge pages
cannot be swapped).
The rough behavior is [1]:
a) !Hugetlbfs:
1) Without MAP_NORESERVE *or* with memory overcommit under Linux
disabled ("/proc/sys/vm/overcommit_memory == 2"), the following
accounting/reservation happens:
For a file backed map
SHARED or READ-only - 0 cost (the file is the map not swap)
PRIVATE WRITABLE - size of mapping per instance
For an anonymous or /dev/zero map
SHARED - size of mapping
PRIVATE READ-only - 0 cost (but of little use)
PRIVATE WRITABLE - size of mapping per instance
2) With MAP_NORESERVE, no accounting/reservation happens.
b) Hugetlbfs:
1) Without MAP_NORESERVE, huge pages are reserved.
2) With MAP_NORESERVE, no huge pages are reserved.
Note: With "/proc/sys/vm/overcommit_memory == 0", we were already able
to configure it for !hugetlbfs globally; this toggle now allows
configuring it more fine-grained, not for the whole system.
The target use case is virtio-mem, which dynamically exposes memory
inside a large, sparse memory area to the VM.
[1] https://www.kernel.org/doc/Documentation/vm/overcommit-accounting
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-10-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's introduce RAM_NORESERVE, allowing mmap'ing with MAP_NORESERVE. The
new flag has the following semantics:
"
RAM is mmap-ed with MAP_NORESERVE. When set, reserving swap space (or huge
pages if applicable) is skipped: will bail out if not supported. When not
set, the OS will do the reservation, if supported for the memory type.
"
Allow passing it into:
- memory_region_init_ram_nomigrate()
- memory_region_init_resizeable_ram()
- memory_region_init_ram_from_file()
... and teach qemu_ram_mmap() and qemu_anon_ram_alloc() about the flag.
Bail out if the flag is not supported, which is the case right now for
both, POSIX and win32. We will add Linux support next and allow specifying
RAM_NORESERVE via memory backends.
The target use case is virtio-mem, which dynamically exposes memory
inside a large, sparse memory area to the VM.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-9-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's pass flags instead of bools to prepare for passing other flags and
update the documentation of qemu_ram_mmap(). Introduce new QEMU_MAP_
flags that abstract the mmap() PROT_ and MAP_ flag handling and simplify
it.
We expose only flags that are currently supported by qemu_ram_mmap().
Maybe, we'll see qemu_mmap() in the future as well that can implement these
flags.
Note: We don't use MAP_ flags as some flags (e.g., MAP_SYNC) are only
defined for some systems and we want to always be able to identify
these flags reliably inside qemu_ram_mmap() -- for example, to properly
warn when some future flags are not available or effective on a system.
Also, this way we can simplify PROT_ handling as well.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-8-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's pass ram_flags to qemu_ram_alloc() and qemu_ram_alloc_internal(),
preparing for passing additional flags.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-7-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's pass in ram flags just like we do with qemu_ram_alloc_from_file(),
to clean up and prepare for more flags.
Simplify the documentation of passed ram flags: Looking at our
documentation of RAM_SHARED and RAM_PMEM is sufficient, no need to be
repetitive.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-5-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
RAM_SHARED now also properly indicates shared anonymous memory. Let's check
that flag for anonymous memory as well, to restore the proper mapping.
Fixes: 06329ccecf ("mem: add share parameter to memory-backend-ram")
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210406080126.24010-4-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can create shared anonymous memory via
"-object memory-backend-ram,share=on,..."
which is, for example, required by PVRDMA for mremap() to work.
Shared anonymous memory is weird, though. Instead of MADV_DONTNEED, we
have to use MADV_REMOVE: MADV_DONTNEED will only remove / zap all
relevant page table entries of the current process, the backend storage
will not get removed, resulting in no reduced memory consumption and
a repopulation of previous content on next access.
Shared anonymous memory is internally really just shmem, but without a
fd exposed. As we cannot use fallocate() without the fd to discard the
backing storage, MADV_REMOVE gets the same job done without a fd as
documented in "man 2 madvise". Removing backing storage implicitly
invalidates all page table entries with relevant mappings - an additional
MADV_DONTNEED is not required.
Fixes: 06329ccecf ("mem: add share parameter to memory-backend-ram")
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210406080126.24010-3-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's drop the "shared" parameter from ram_block_add() and properly
store it in the flags of the ram block instead, such that
qemu_ram_is_shared() properly succeeds on all ram blocks that were mapped
MAP_SHARED.
We'll use this information next to fix some cases with shared anonymous
memory.
Reviewed-by: Igor Kotrasinski <i.kotrasinsk@partner.samsung.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210406080126.24010-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Based on the description of error_setg(), the local variable err in
qemu_init_subsystems() should be initialized to NULL.
Fixes: efd7ab22fb ("vl: extract qemu_init_subsystems")
Cc: qemu-stable@nongnu.org
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Message-Id: <20210610131729.3906565-1-liangpeng10@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Based on the description of error_setg(), the local variable err in
qemu_maybe_daemonize() should be initialized to NULL.
Without fix, the uninitialized *errp triggers assert failure which
doesn't show much valuable information.
Before the fix:
qemu-system-x86_64: ../util/error.c:59: error_setv: Assertion `*errp == NULL' failed.
After fix:
qemu-system-x86_64: cannot create PID file: Cannot open pid file: Permission denied
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20210610084741.456260-1-zhenzhong.duan@intel.com>
Cc: qemu-stable@nongnu.org
Fixes: 0546c0609c ("vl: split various early command line options to a separate function", 2020-12-10)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The VM stop process has to flush outstanding I/O and this is a critical
failure scenario that is hard to diagnose. Add a probe point that
records the flush return code.
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit bc2f4fcb1d ("qom: move user_creatable_add_opts logic to vl.c
and QAPIfy it", 2021-03-19) switched the creation of objects from
qemu_opts_foreach to a bespoke QTAILQ in preparation for supporting JSON
syntax in -object.
Unfortunately in doing so it lost support for [object] stanzas in
configuration files and also for "-set object.ID.KEY=VAL". The latter
is hard to re-establish and probably best solved by deprecating -set.
This patch uses the infrastructure introduced by the previous two
patches in order to parse QOM objects correctly from configuration
files.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210524105752.3318299-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let -readconfig support parsing command line options into QDict or
QemuOpts. This will be used to add back support for objects in
-readconfig.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210524105752.3318299-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change the parser to put the values into a QDict and pass them
to a callback. qemu_config_parse's QemuOpts creation is
itself turned into a callback function.
This is useful for -readconfig to support keyval-based options;
getting a QDict from the parser removes a roundtrip from
QDict to QemuOpts and then back to QDict.
Unfortunately there is a disadvantage in that semantic errors will
point to the last line of the group, because the entries of the QDict
do not have a location attached.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210524105752.3318299-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch enables reverse debugging with watchpoints.
Reverse continue scans the execution to find the breakpoints
and watchpoints that should fire. It uses helper function
replay_breakpoint() for that. But this function needs to access
icount, which can't be correct in the middle of TB.
Therefore, in case of watchpoint, we have to retranslate the block
to allow this access.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <162072430303.827403.7379783546934958566.stgit@pasha-ThinkPad-X280>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Right now the SPICE module is special cased to be loaded when processing
of the -spice command line option. However, the spice option group
can also be brought in via -readconfig, in which case the module is
not loaded.
Add a generic hook to load modules that provide a QemuOpts group,
and use it for the "spice" and "iscsi" groups.
Fixes: #194
Fixes: https://bugs.launchpad.net/qemu/+bug/1910696
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Starting in QEMU 6.0's commit f5c9fcb82d ("vl: separate
qemu_create_machine", 2020-12-10), a function have_custom_ram_size()
replaced the return value of set_memory_options().
The purpose of the return value was to record the presence of
"-m size", and if it was not there, change the default RAM
size to the size of the memory backend passed with "-M
memory-backend".
With that commit, however, have_custom_ram_size() is now queried only
after set_memory_options has stored the fixed-up RAM size in QemuOpts for
"future use". This was actually the only future use of the fixed-up RAM
size, so remove that code and fix the bug.
Cc: qemu-stable@nongnu.org
Fixes: f5c9fcb82d ("vl: separate qemu_create_machine", 2020-12-10)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These headers are also included from softmmu/vl.c, so they should be
in include/. Remove qemu-options-wrapper.h, since elsewhere
we include "template" headers directly and #define the parameters in
the including file; move qemu-options.h to include/.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some of the memory listener may want to do log synchronization without
being able to specify a range of memory to sync but always globally.
Such a memory listener should provide this new method instead of the
log_sync() method.
Obviously we can also achieve similar thing when we put the global
sync logic into a log_sync() handler. However that's not efficient
enough because otherwise memory_global_dirty_log_sync() may do the
global sync N times, where N is the number of flat ranges in the
address space.
Make this new method be exclusive to log_sync().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qtest server right now can only be created using the -qtest
and -qtest-log options. Allow an alternative way to create it
using "-object qtest,chardev=...,log=...".
This is part of the long term plan to make more (or all) of
QEMU configurable through QMP and preconfig mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix of the 2021-05-11 version, with a fix to build on the armhf
cross.
The largest change in this set is David's changes for ram block size
changing; then there's a pile of other cleanups and fixes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=RJvy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210513a' into staging
Migration pull 2021-05-13
Fix of the 2021-05-11 version, with a fix to build on the armhf
cross.
The largest change in this set is David's changes for ram block size
changing; then there's a pile of other cleanups and fixes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Thu 13 May 2021 18:36:06 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20210513a:
tests/migration: introduce multifd into guestperf
tests/qtest/migration-test: Use g_autofree to avoid leaks on error paths
tests/migration-test: Fix "true" vs true
migration/ram: Use offset_in_ramblock() in range checks
migration/multifd: Print used_length of memory block
migration/ram: Handle RAM block resizes during postcopy
migration/ram: Simplify host page handling in ram_load_postcopy()
migration/ram: Discard RAM when growing RAM blocks after ram_postcopy_incoming_init()
exec: Relax range check in ram_block_discard_range()
migration/ram: Handle RAM block resizes during precopy
numa: Make all callbacks of ram block notifiers optional
numa: Teach ram block notifiers about resizeable ram blocks
util: vfio-helpers: Factor out and fix processing of existing ram blocks
migration: Drop redundant query-migrate result @blocked
migration/ram: Optimize ram_save_host_page()
migration/ram: Reduce unnecessary rate limiting
migrate/ram: remove "ram_bulk_stage" and "fpo_enabled"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to make use of ram_block_discard_range() in the RAM block resize
callback when growing a RAM block, *before* used_length is changed.
Let's relax the check. As RAM blocks always mmap the whole max_length area,
we cannot corrupt unrelated data.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-6-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Resizing while migrating is dangerous and does not work as expected.
The whole migration code works on the usable_length of ram blocks and does
not expect this to change at random points in time.
In the case of precopy, the ram block size must not change on the source,
after syncing the RAM block list in ram_save_setup(), so as long as the
guest is still running on the source.
Resizing can be trigger *after* (but not during) a reset in
ACPI code by the guest
- hw/arm/virt-acpi-build.c:acpi_ram_update()
- hw/i386/acpi-build.c:acpi_ram_update()
Use the ram block notifier to get notified about resizes. Let's simply
cancel migration and indicate the reason. We'll continue running on the
source. No harm done.
Update the documentation. Postcopy will be handled separately.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-5-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Manual merge
Ram block notifiers are currently not aware of resizes. To properly
handle resizes during migration, we want to teach ram block notifiers about
resizeable ram.
Introduce the basic infrastructure but keep using max_size in the
existing notifiers. Supply the max_size when adding and removing ram
blocks. Also, notify on resizes.
Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: xen-devel@lists.xenproject.org
Cc: haxm-team@intel.com
Cc: Paul Durrant <paul@xen.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Wenchao Wang <wenchao.wang@intel.com>
Cc: Colin Xu <colin.xu@intel.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-3-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Factor it out into common code when a new notifier is registered, just
as done with the memory region notifier. This keeps logic about how to
process existing ram blocks at a central place.
Just like when adding a new ram block, we have to register the max_length.
Ram blocks are only "fake resized". All memory (max_length) is mapped.
Print the warning from inside qemu_vfio_ram_block_added().
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-2-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Target unicore32 was deprecated in commit 8e4ff4a8d2, v5.2.0. See
there for rationale.
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-3-armbru@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
There are no known users of this CPU anymore, and there are no
binaries available online which could be used for regression tests,
so the code has likely completely bit-rotten already. It's been
marked as deprecated since two releases now and nobody spoke up
that there is still a need to keep it, thus let's remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210430160355.698194-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Commit message typos fixed, trivial conflicts resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
move the call for sysemu specifically in machine_run_board_init,
mirror the calling sequence for user mode too.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210322132800.7470-23-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stop including exec/address-spaces.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including cpu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including hw/boards.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-3-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including sysemu/sysemu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch moves static last_delta variable into timers_state
structure to allow correct vmstate operations with icount shift=auto enabled.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <161701335066.1180180.7104085247702343395.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similarly to 5f629d943c ("s390x: fix s390 virtio aliases"),
define the virtio aliases.
This allows to start machines with virtio devices without
knowledge of the implementation type.
For instance, we can use "-device virtio-scsi" on
m68k, s390x or PC, and the device will be respectively
"virtio-scsi-device", "virtio-scsi-ccw" or "virtio-scsi-pci".
This already exists for s390x and -ccw interfaces, add them
for m68k and MMIO (-device) interfaces.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210319202335.2397060-3-laurent@vivier.eu>
Message-Id: <20210323165308.15244-18-alex.bennee@linaro.org>
This is used to define virtio-*-pci and virtio-*-ccw aliases
rather than substracting the CCW architecture from all the others.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210319202335.2397060-2-laurent@vivier.eu>
Message-Id: <20210323165308.15244-17-alex.bennee@linaro.org>
The function flatview_for_each_range() calls a callback for each
range in a FlatView. Currently the callback gets the start and
length of the range and the MemoryRegion involved, but not the offset
within the MemoryRegion. Add this to the callback's arguments; we're
going to want it for a new use in the next commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210318174823.18066-4-peter.maydell@linaro.org
New option -compat lets you configure what to do when deprecated
interfaces get used. This is intended for testing users of the
management interfaces. It is experimental.
-compat deprecated-input=<input-policy> configures what to do when
deprecated input is received. Input policy can be "accept" (accept
silently), or "reject" (reject the request with an error).
-compat deprecated-output=<out-policy> configures what to do when
deprecated output is sent. Output policy can be "accept" (pass on
unchanged), or "hide" (filter out the deprecated parts).
Default is "accept". Policies other than "accept" are implemented
later in this series.
For now, -compat covers only syntactic aspects of QMP, i.e. stuff
tagged with feature 'deprecated'. We may want to extend it to cover
semantic aspects, CLI, and experimental features.
Note that there is no good way for management application to detect
presence of -compat: it's not visible output of query-qmp-schema or
query-command-line-options. Tolerable, because it's meant for
testing. If running with -compat fails, skip the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-3-armbru@redhat.com>
Several QOM type names contain ',':
ARM,bitband-memory
etraxfs,pic
etraxfs,serial
etraxfs,timer
fsl,imx25
fsl,imx31
fsl,imx6
fsl,imx6ul
fsl,imx7
grlib,ahbpnp
grlib,apbpnp
grlib,apbuart
grlib,gptimer
grlib,irqmp
qemu,register
SUNW,bpp
SUNW,CS4231
SUNW,DBRI
SUNW,DBRI.prom
SUNW,fdtwo
SUNW,sx
SUNW,tcx
xilinx,zynq_slcr
xlnx,zynqmp
xlnx,zynqmp-pmu-soc
xlnx,zynq-xadc
These are all device types. They can't be plugged with -device /
device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one
actually works.
They *can* be used with -device / device_add to request help.
Usability is poor, though: you have to double the comma, like this:
$ qemu-system-x86_64 -device SUNW,,fdtwo,help
Trap for the unwary. The fact that this was broken in
device-introspect-test for more than six years until commit e27bd49876
fixed it demonstrates that "the unwary" includes seasoned developers.
One QOM type name contains ' ': "ICH9 SMB". Because having to
remember just one way to quote would be too easy.
Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and '
' by '-' in the other type names.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210304140229.575481-2-armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the crap deprecated in commit a1b40bda08 "blockdev: Deprecate
-drive with bogus interface type" (v5.1.0).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20210309161214.1402527-5-armbru@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Extend the ObjectOption code that was added in the previous patch to
enable passing JSON to -object. Even though we cannot yet add
non-scalar properties with the human-friendly comma-separated syntax,
they can now be added as JSON.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210312173547.1283477-4-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emulators are currently using OptsVisitor (via user_creatable_add_opts)
to parse the -object command line option. This has one extra feature,
compared to keyval, which is automatic conversion of integers to lists
as well as support for lists as repeated options:
-object memory-backend-ram,id=pc.ram,size=1048576000,host-nodes=0,policy=bind
So we cannot replace OptsVisitor with keyval right now. Still, this
patch moves the user_creatable_add_opts logic to vl.c since it is
not needed anywhere else, and makes it go through user_creatable_add_qapi.
In order to minimize code changes, the predicate still takes a string.
This can be changed later to use the ObjectType QAPI enum directly.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210312173547.1283477-3-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'ide-hd' and 'ide-cd' devices provide suitable alternatives.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
- get rid of legacy_s390_alloc() and phys_mem_set_alloc()
- tcg: implement the MVPG condition-code-option bit
- fix g_autofree variable handing in the pci vfio code
- use official z15 names in the cpu model definitions
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEw9DWbcNiT/aowBjO3s9rk8bwL68FAmBQgqUSHGNvaHVja0By
ZWRoYXQuY29tAAoJEN7Pa5PG8C+vwOkP/3K5y38/8v3VSoOxFbpTvAqSDBtHtCpz
bDIfqFmLenniFKRuGWr/rAUCbFCSymhoy3YNuWXa2wX4WVjOEx3wRCxkShC1/G5B
PBu75UmB58CivL5agHigA0r1JSwquqFfzTr+mU9GAyf5aUJj3iGqX1rx+Ldyeva1
bdSxOY8LZVuM52E5QvDFzjOCw0Ti83yje7OdPuz4FixaXoyZzNEB50E3hxgJPIYE
khHAP1LaxmOGqfCuCBYOkFOUVx3xXnevnNouP2l98fBMa8ctu1JrsEz/9WA7mbDF
1rYDtEE2l4eqWlXkMX1LcSV1eJ5rlf1l/W4uyW9Ti6gi30dZuOJnrfviP2bBPjQE
VrGsmIg35PhP9y7y8ZlBJHgxENw3qrlJ2I1R/IIjivN84EZ9OkxaW6pMt0R+1Q1o
tQAh9/2Md9IHsvZEZMTppIuRn0X0Y4Wfm3/9vY1twrrZFPzc5cSsFhrDam0KRGro
PgnsJ3b1aeKW7k9fS0hy807SKV5stdmTCAGPoP5RYXRIQhuUsaFXN04w+PuIUY7m
kd2IRKrubcWhmSnTELBO97lTmLMCb5vyOX6iKbTbbQ0kg68qB8tna7WlfvfxpH5a
NFk6yvJiygmedX4TaIMxvJt6ZIWNSksCaJWsAb72oySXsbcu5vewMRUs4/4kAtJj
gMwEILszb60S
=8eNE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210316' into staging
s390x updates:
- get rid of legacy_s390_alloc() and phys_mem_set_alloc()
- tcg: implement the MVPG condition-code-option bit
- fix g_autofree variable handing in the pci vfio code
- use official z15 names in the cpu model definitions
# gpg: Signature made Tue 16 Mar 2021 10:04:21 GMT
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck-gitlab/tags/s390x-20210316:
s390x/pci: Add missing initialization for g_autofree variables
target/s390x: Store r1/r2 for page-translation exceptions during MVPG
target/s390x: Implement the MVPG condition-code-option bit
s390x/cpu_model: use official name for 8562
exec: Get rid of phys_mem_set_alloc()
s390x/kvm: Get rid of legacy_s390_alloc()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the sparse-mem device, we want the fuzzer to populate entire DMA
reads from sparse-mem, rather than hooking into the individual MMIO
memory_region_dispatch_read operations. Otherwise, the fuzzer will treat
each sequential read separately (and populate it with a separate
pattern). Work around this by rearranging some DMA hooks. Since the
fuzzer has it's own logic to skip accidentally writing to MMIO regions,
we can call the DMA cb, outside the flatview_translate loop.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When trying to remove the -usbdevice option, there were complaints that
"-usbdevice braille" is still a very useful shortcut for some people.
Thus we never remove this option. Since it's not such a big burden to
keep it around, and it's also convenient in the sense that you don't
have to worry to enable a host controller explicitly with this option,
we should remove it from he deprecation list again.
However, there is one exception: "-usbdevice audio" should go away, since
audio devices without "audiodev=..." parameter are also on the deprecation
list and you cannot use "-usbdevice audio" with "audiodev".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210310173323.1422754-4-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
As the last user is gone, we can get rid of phys_mem_set_alloc() and
simplify.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210303130916.22553-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Currently get_naturally_aligned_size() is used by the intel iommu
to compute the maximum invalidation range based on @size which is
a power of 2 while being aligned with the @start address and less
than the maximum range defined by @gaw.
This helper is also useful for other iommu devices (virtio-iommu,
SMMUv3) to make sure IOMMU UNMAP notifiers only are called with
power of 2 range sizes.
Let's move this latter into dma-helpers.c and rename it into
dma_aligned_pow2_mask(). Also rewrite the helper so that it
accomodates UINT64_MAX values for the size mask and max mask.
It now returns a mask instead of a size. Change the caller.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-id: 20210309102742.30442-3-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- add warning text to quickstart example
- add CFI tests to CI
- use --arch-only for docker pre-requisites
- fix .editorconfig for emacs
- add guest-loader for Xen-like hypervisor testing
- move generic-loader docs into manual proper
- move semihosting out of hw/
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmBI50MACgkQ+9DbCVqe
KkSyKggAhPZW+7sReVEsFdnVfwuo3evW7auoW44mghNbikTnm3RfoahYTrek8lGZ
AEo2gFMbzENW0j88e0OvSYYtwkVz3sD68bygfXerti6sQwWlwkf42I/suWjJNLph
oVKGEEdJess9+zR13Cu6RAq5RaTwzDPGPjUwTbeJPpAps4+UZV3hsxhaxs8keII6
GBa/idnh0qEApP2NDLKiSASrYZM7xGvljE7zO4qhchd6iSH/o5rCtkoB2tRCcXGo
+KF8LyBsUNf7GiWp0yYZMZUQ3Pqskqma8N3d2A4UlS1kXvxeX/FiORkG/Ne8bH1Z
VZ1Z/xbyXGlVkiP1bcoYSc6XWHNDTw==
=R9zQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2' into staging
Testing, guest-loader and other misc tweaks
- add warning text to quickstart example
- add CFI tests to CI
- use --arch-only for docker pre-requisites
- fix .editorconfig for emacs
- add guest-loader for Xen-like hypervisor testing
- move generic-loader docs into manual proper
- move semihosting out of hw/
# gpg: Signature made Wed 10 Mar 2021 15:35:31 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2:
semihosting: Move hw/semihosting/ -> semihosting/
semihosting: Move include/hw/semihosting/ -> include/semihosting/
tests/avocado: add boot_xen tests
docs: add some documentation for the guest-loader
docs: move generic-loader documentation into the main manual
hw/core: implement a guest-loader to support static hypervisor guests
device_tree: add qemu_fdt_setprop_string_array helper
hw/riscv: migrate fdt field to generic MachineState
hw/board: promote fdt from ARM VirtMachineState to MachineState
.editorconfig: update the automatic mode setting for Emacs
tests/docker: Use --arch-only when building Debian cross image
gitlab-ci.yml: Add jobs to test CFI flags
gitlab-ci.yml: Allow custom # of parallel linkers
tests/docker: add a test-tcg for building then running check-tcg
docs/system: add a gentle prompt for the complexity to come
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to move the semihosting code out of hw/ in the next patch.
This patch contains the mechanical steps, created using:
$ git mv include/hw/semihosting/ include/
$ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210226131356.3964782-2-f4bug@amsat.org>
Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
A string array in device tree is simply a series of \0 terminated
strings next to each other. As libfdt doesn't support that directly
we need to build it ourselves.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210303173642.3805-4-alex.bennee@linaro.org>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
runstate_check() returns a boolean. runstate_is_running()
returns what runstate_check() returns, also a boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210111152020.1422021-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Follow the inclusive terminology from the "Conscious Language in your
Open Source Projects" guidelines [*] and replace the word "blacklist"
appropriately.
[*] https://github.com/conscious-lang/conscious-lang-docs/blob/main/faq.md
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210303184644.1639691-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We forward-declare Object typedef in "qemu/typedefs.h" since commit
ca27b5eb7c ("qom/object: Move Object typedef to 'qemu/typedefs.h'").
Use it everywhere to make the code simpler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210225182003.3629342-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There are 23 files that include the "sysemu/qtest.h",
but they do not use any qtest functions.
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210226081414.205946-1-kuhn.chenqun@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is nothing special about this compile flag that doesn't mean we
can't just compute it with curr_cflags() which we should be using when
building a new set.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210224165811.11567-3-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the "simple" backend is not active but the "log" backend is,
both "-trace file=" and "-D" will result in a call to
qemu_set_log_filename. Unfortunately, QEMU was also calling
qemu_set_log_filename if "-D" was not passed, so the "-trace
file=" option had no effect and the tracepoints went back to
stderr.
Fortunately we can just skip qemu_set_log_filename in that case,
because the log backend will initialize itself just fine as soon
as qemu_set_log is called, also in qemu_process_early_options.
Cc: stefanha@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210209145759.141231-3-pbonzini@redhat.com>
This enables some simplification of vl.c via error_fatal, and improves
error messages. Before:
$ ./qemu-system-x86_64 -readconfig .
qemu-system-x86_64: error reading file
qemu-system-x86_64: -readconfig .: read config .: Invalid argument
$ /usr/libexec/qemu-kvm -readconfig foo
qemu-kvm: -readconfig foo: read config foo: No such file or directory
After:
$ ./qemu-system-x86_64 -readconfig .
qemu-system-x86_64: -readconfig .: Cannot read config file: Is a directory
$ ./qemu-system-x86_64 -readconfig foo
qemu-system-x86_64: -readconfig foo: Could not open 'foo': No such file or directory
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210226170816.231173-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit v5.2.0-190-g0546c0609c ("vl: split various early command line
options to a separate function") moved the trace backend init code to
the qemu_process_early_options(). Which is now being called before
os_daemonize() via qemu_maybe_daemonize().
Turns out that this change of order causes a problem when executing
QEMU in daemon mode and with CONFIG_TRACE_SIMPLE. The trace thread
is now being created by the parent, and the parent is left waiting for
a trace file flush that was registered via st_init(). The result is
that the parent process never exits.
To reproduce, fire up a QEMU process with -daemonize and with
CONFIG_TRACE_SIMPLE enabled. Two QEMU process will be left in the
host:
$ sudo ./x86_64-softmmu/qemu-system-x86_64 -S -no-user-config -nodefaults \
-nographic -machine none,accel=kvm:tcg -daemonize
$ ps axf | grep qemu
529710 pts/3 S+ 0:00 | \_ grep --color=auto qemu
529697 ? Ssl 0:00 \_ ./x86_64-softmmu/qemu-system-x86_64 -S -no-user-config -nodefaults -nographic -machine none,accel=kvm:tcg -daemonize
529699 ? Sl 0:00 \_ ./x86_64-softmmu/qemu-system-x86_64 -S -no-user-config -nodefaults -nographic -machine none,accel=kvm:tcg -daemonize
The parent thread is hang in flush_trace_file:
$ sudo gdb ./x86_64-softmmu/qemu-system-x86_64 529697
(..)
(gdb) bt
#0 0x00007f9dac6a137d in syscall () at /lib64/libc.so.6
#1 0x00007f9dacc3c4f3 in g_cond_wait () at /lib64/libglib-2.0.so.0
#2 0x0000555d12f952da in flush_trace_file (wait=true) at ../trace/simple.c:140
#3 0x0000555d12f95b4c in st_flush_trace_buffer () at ../trace/simple.c:383
#4 0x00007f9dac5e43a7 in __run_exit_handlers () at /lib64/libc.so.6
#5 0x00007f9dac5e4550 in on_exit () at /lib64/libc.so.6
#6 0x0000555d12d454de in os_daemonize () at ../os-posix.c:255
#7 0x0000555d12d0bd5c in qemu_maybe_daemonize (pid_file=0x0) at ../softmmu/vl.c:2408
#8 0x0000555d12d0e566 in qemu_init (argc=8, argv=0x7fffc594d9b8, envp=0x7fffc594da00) at ../softmmu/vl.c:3459
#9 0x0000555d128edac1 in main (argc=8, argv=0x7fffc594d9b8, envp=0x7fffc594da00) at ../softmmu/main.c:49
(gdb)
Aside from the 'zombie' process in the host, this is directly impacting
Libvirt. Libvirt waits for the parent process to exit to be sure that the
QMP monitor is available in the daemonized process to fetch QEMU
capabilities, and as is now Libvirt hangs at daemon start waiting
for the parent thread to exit.
The fix is simple: just move the trace backend related code back to
be executed after daemonizing.
Fixes: 0546c0609c
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210105181437.538366-2-danielhb413@gmail.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The functionality of -writeconfig is limited and the code
does not even try to detect cases where it prints incorrect
syntax (for example if values have a quote in them, since
qemu_config_parse does not support any kind of escaping)
so remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An SEV-ES guest does not allow register state to be altered once it has
been measured. When an SEV-ES guest issues a reboot command, Qemu will
reset the vCPU state and resume the guest. This will cause failures under
SEV-ES. Prevent that from occuring by introducing an arch-specific
callback that returns a boolean indicating whether vCPUs are resettable.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <1ac39c441b9a3e970e9556e1cc29d0a0814de6fd.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow RAM MemoryRegion to be created from an offset in a file, instead
of allocating at offset of 0 by default. This is needed to synchronize
RAM between QEMU & remote process.
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 609996697ad8617e3b01df38accc5c208c24d74e.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
v2
Dropped vmstate: Fix memory leak in vmstate_handle_alloc
Broke on Power
Added migration: only check page size match if RAM postcopy is enabled
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAmAhIE4ACgkQBRYzHrxb
/ecPuA/+Pgo++1ZSseJUgbLePwyTVc0jahdcvYEDmLUn8UM6ikBcBXBgUKHdkFW3
bjSSVgB/xxvXSiafBK4xFNrCqSgqMSr3DJcHmvWgv2wVARcYf6Z26Da53LZq1Qru
0tvRyb40Od1f9zb8Zj7e2Y3pjQ9ybLLbjfNhgnOBbQivqWkjZI31oV2KUCWY2+eV
T1BEwr6mgYepqhmeB6OvQZtaQVC5toirS6NajNF4nt0vZEIGIvK6/A9erCVU8Tze
5ch1J0MUqgc3q6ZSE/I9BHEy6MaL0X8G6H+ezjxdoRQtbt1iM/YqZJCSrXkAxiLC
ROohryb6qVk26+UYuana79faLwrw359WlkwNEE6SEIRSENu+6p7bgN3LZuCILCO7
xJEkeTgy6r40IGCkDC9aWa8pyLHpNX9gyLpGBHdIRD6zEOWaKNtzh7E2uo/T0ann
BpcfgQOsYN25hIHiiXnxozUREbx71VDfMq7GqGB6eC3u2+a3U6jpSJb1nNq5NB89
FJYLZy5Rbuy7OStMwfMsxRs7E63XvGgnwrN8FczU/pumCPX4lDYIpnocqinUmP8p
XubRQQVaVDSKIq1mvzw7iR/1NsP9vfYvnrAIv941f38NBmDKqdPuMOXR/qB/Kp2Y
jB7b1L5/JcXbWsQmK7fda9jmPzFwSO2cTeTiUonk9RfuuDEws0A=
=4tbe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210208a' into staging
Migration pull 2021-02-08
v2
Dropped vmstate: Fix memory leak in vmstate_handle_alloc
Broke on Power
Added migration: only check page size match if RAM postcopy is enabled
# gpg: Signature made Mon 08 Feb 2021 11:28:14 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20210208a: (27 commits)
migration: only check page size match if RAM postcopy is enabled
migration: introduce snapshot-{save, load, delete} QMP commands
iotests: fix loading of common.config from tests/ subdir
iotests: add support for capturing and matching QMP events
migration: introduce a delete_snapshot wrapper
migration: wire up support for snapshot device selection
migration: control whether snapshots are ovewritten
block: rename and alter bdrv_all_find_snapshot semantics
block: allow specifying name of block device for vmstate storage
block: add ability to specify list of blockdevs during snapshot
migration: stop returning errno from load_snapshot()
migration: Make save_snapshot() return bool, not 0/-1
block: push error reporting into bdrv_all_*_snapshot functions
migration: Display the migration blockers
migration: Add blocker information
migration: Fix a few absurdly defective error messages
migration: Fix cache_init()'s "Failed to allocate" error messages
migration: Clean up signed vs. unsigned XBZRLE cache-size
migration: Fix migrate-set-parameters argument validation
migration: introduce 'userfaultfd-wrlat.py' script
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
During migrations, after each iteration, cpu_throttle_set() is called,
which irrespective of input, re-arms the timer according to value of
new_throttle_pct. This causes cpu_throttle_thread() to be delayed in
getting scheduled and consqeuntly lets guest run for more time than what
the throttle value should allow. This leads to spikes in guest throughput
at high cpu-throttle percentage whenever cpu_throttle_set() is called.
A solution would be not to modify the timer immediately in
cpu_throttle_set(), instead, only modify throttle_percentage so that the
throttle would automatically adjust to the required percentage when
cpu_throttle_timer_tick() is invoked.
Manually tested the patch using following configuration:
Guest:
Centos7 (3.10.0-123.el7.x86_64)
Total Memory - 64GB , CPUs - 16
Tool used - stress (1.0.4)
Workload - stress --vm 32 --vm-bytes 1G --vm-keep
Migration Parameters:
Network Bandwidth - 500MBPS
cpu-throttle-initial - 99
Results:
With timer_mod(): fails to converge, continues indefinitely
Without timer_mod(): converges in 249 sec
Signed-off-by: Utkarsh Tripathi <utkarsh.tripathi@nutanix.com>
Message-Id: <1609420384-119407-1-git-send-email-utkarsh.tripathi@nutanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We passed an is_write flag to the fuzz_dma_read_cb function to
differentiate between the mapped DMA regions that need to be populated
with fuzzed data, and those that don't. We simply passed through the
address_space_map is_write parameter. The goal was to cut down on
unnecessarily populating mapped DMA regions, when they are not read
from.
Unfortunately, nothing precludes code from reading from regions mapped
with is_write=true. For example, see:
https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg04729.html
This patch removes the is_write parameter to fuzz_dma_read_cb. As a
result, we will fill all mapped DMA regions with fuzzed data, ignoring
the specified transfer direction.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20210120060255.558535-1-alxndr@bu.edu>
Modify load_snapshot/save_snapshot to accept the device list and vmstate
node name parameters previously added to the block layer.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-9-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
None of the callers care about the errno value since there is a full
Error object populated. This gives consistency with save_snapshot()
which already just returns a boolean value.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[PMD: Return false/true instead of -1/0, document function]
Acked-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-4-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The platform specific details of mechanisms for implementing
confidential guest support may require setup at various points during
initialization. Thus, it's not really feasible to have a single cgs
initialization hook, but instead each mechanism needs its own
initialization calls in arch or machine specific code.
However, to make it harder to have a bug where a mechanism isn't
properly initialized under some circumstances, we want to have a
common place, late in boot, where we verify that cgs has been
initialized if it was requested.
This patch introduces a ready flag to the ConfidentialGuestSupport
base type to accomplish this, which we verify in
qemu_machine_creation_done().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Global properties have an @optional field, which allows to apply a given
property to a given type even if one of its subclasses doesn't support
it. This is especially used in the compat code when dealing with the
"disable-modern" and "disable-legacy" properties and the "virtio-pci"
type.
Allow object_register_sugar_prop() to set this field as well.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159738953558.377274.16617742952571083440.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This will allow us to centralize the registration of
the cpus.c module accelerator operations (in accel/accel-softmmu.c),
and trigger it automatically using object hierarchy lookup from the
new accel_init_interfaces() initialization step, depending just on
which accelerators are available in the code.
Rename all tcg-cpus.c, kvm-cpus.c, etc to tcg-accel-ops.c,
kvm-accel-ops.c, etc, matching the object type names.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-18-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
we cannot in principle make the TCG Operations field definitions
conditional on CONFIG_TCG in code that is included by both common_ss
and specific_ss modules.
Therefore, what we can do safely to restrict the TCG fields to TCG-only
builds, is to move all tcg cpu operations into a separate header file,
which is only included by TCG, target-specific code.
This leaves just a NULL pointer in the cpu.h for the non-TCG builds.
This also tidies up the code in all targets a bit, having all TCG cpu
operations neatly contained by a dedicated data struct.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-16-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
commit 568496c0c0 ("cpu: Add callback to check architectural") and
commit 3826121d92 ("target-arm: Implement checking of fired")
introduced an ARM-specific hack for cpu_check_watchpoint.
Make debug_check_watchpoint optional, and move it to tcg_ops.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-15-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
commit 4061200059 ("arm: Correctly handle watchpoints for BE32 CPUs")
introduced this ARM-specific, TCG-specific hack to adjust the address,
before checking it with cpu_check_watchpoint.
Make adjust_watchpoint_address optional and move it to tcg_ops.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-14-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move blk_exp_close_all() from bdrv_close() to qemu_cleanup(), before
bdrv_drain_all_begin().
Export drivers may have coroutines yielding at some point in the block
layer, so we need to shut them down before draining the block layer,
as otherwise they may get stuck blk_wait_while_drained().
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1900505
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20210201125032.44713-3-slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is currently no way to open(O_RDONLY) and mmap(PROT_READ) when
creating a memory region from a file. This functionality is needed since
the underlying host file may not allow writing.
Add a bool readonly argument to memory_region_init_ram_from_file() and
the APIs it calls.
Extend memory_region_init_ram_from_file() rather than introducing a
memory_region_init_rom_from_file() API so that callers can easily make a
choice between read/write and read-only at runtime without calling
different APIs.
No new RAMBlock flag is introduced for read-only because it's unclear
whether RAMBlocks need to know that they are read-only. Pass a bool
readonly argument instead.
Both of these design decisions can be changed in the future. It just
seemed like the simplest approach to me.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210104171320.575838-2-stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The -msg timestamp=on|off option controls whether a timestamp is printed
with error_report() messages. The "-msg" name suggests that this option
has a wider effect than just error_report(). The next patch extends it
to the 'log' trace backend, so rename the variable from
error_with_timestamp to message_with_timestamp.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210125113507.224287-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These cases require a bit more thought to review; in each case, the
code was appending to a list, but not with a FOOList **tail variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210113221013.390592-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Flawed change to qmp_guest_network_get_interfaces() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use qemu_opts_parse_noisily now that HMP does not call
vnc_parse anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210120144235.345983-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When building with GCC 10.2 configured with --extra-cflags=-Os, we get:
softmmu/physmem.c: In function 'address_space_translate_for_iotlb':
softmmu/physmem.c:643:26: error: 'notifier' may be used uninitialized in this function [-Werror=maybe-uninitialized]
643 | notifier->active = true;
| ^
softmmu/physmem.c:608:23: note: 'notifier' was declared here
608 | TCGIOMMUNotifier *notifier;
| ^~~~~~~~
Initialize 'notifier' to silence the warning.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210117170411.4106949-1-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The possible choices for panic, reset and watchdog actions are inconsistent.
"-action panic=poweroff" should be renamed to "-action panic=shutdown"
on the command line. This is because "-action panic=poweroff" and
"-action watchdog=poweroff" have slightly different semantics, the first
does an unorderly exit while the second goes through qemu_cleanup(). With
this change, -no-shutdown would not have to change "-action panic=pause"
"pause", just like it does not have to change the reset action.
"-action reboot=none" should be renamed to "-action reboot=reset".
This should be self explanatory, since for example "-action panic=none"
lets the guest proceed without taking any action.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Despite it's name it didn't actually clean-up so let us document
gdb_exit() better and use that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210108224256.2321-9-alex.bennee@linaro.org>
We are shortly going to have a split rw/rx jit buffer. Depending
on the host, we need to flush the dcache at the rw data pointer and
flush the icache at the rx code pointer.
For now, the two passed pointers are identical, so there is no
effective change in behaviour.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It's common to want to print a human-readable indication of a clock's
frequency. Provide a utility function in the clock API to return a
string which is a displayable representation of the frequency,
and use it in qdev-monitor.c.
Before:
(qemu) info qtree
[...]
dev: xilinx,zynq_slcr, id ""
clock-in "ps_clk" freq_hz=3.333333e+07
mmio 00000000f8000000/0000000000001000
After:
dev: xilinx,zynq_slcr, id ""
clock-in "ps_clk" freq_hz=33.3 MHz
mmio 00000000f8000000/0000000000001000
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201215150929.30311-5-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This has been a tcg-specific function, but is also in use
by hardware accelerators via physmem.c. This can cause
link errors when tcg is disabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201214140314.18544-3-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable removing tcg/$tcg_arch from the include path when TCG is disabled.
Move translate-all.h to include/exec, since stubs exist for the functions
defined therein.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to the renumbering of text consoles when graphical consoles are
created, init_displaystate must be called after all QemuConsoles are
created, i.e. after devices are created.
vl.c calls it from qemu_init_displays, while qmp_x_exit_preconfig is
where devices are created. If qemu_init_displays is called before it,
the VGA graphical console does not come up.
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Silly patch extracted from the next one, which is already big enough.
Because there are already local variables named "accel", we will name
the global vl.c variable for "-M accel" accelerators instead. Rename
it already in configure_accelerators to be ready.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It has been marked as deprecated since QEMU v5.0, replaced by the
corresponding parameter of the -display option.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It has been marked as deprecated since QEMU v4.2, replaced by
the -overcommit option. Time to remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The '-tb-size' option (replaced by '-accel tcg,tb-size') is
deprecated since 5.0 (commit fe17413247). Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201202112714.1223783-1-philmd@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In using the address_space_translate_internal API, address_space_cache_init
forgot one piece of advice that can be found in the code for
address_space_translate_internal:
/* MMIO registers can be expected to perform full-width accesses based only
* on their address, without considering adjacent registers that could
* decode to completely different MemoryRegions. When such registers
* exist (e.g. I/O ports 0xcf8 and 0xcf9 on most PC chipsets), MMIO
* regions overlap wildly. For this reason we cannot clamp the accesses
* here.
*
* If the length is small (as is the case for address_space_ldl/stl),
* everything works fine. If the incoming length is large, however,
* the caller really has to do the clamping through memory_access_size.
*/
address_space_cache_init is exactly one such case where "the incoming length
is large", therefore we need to clamp the resulting length---not to
memory_access_size though, since we are not doing an access yet, but to
the size of the resulting section. This ensures that subsequent accesses
to the cached MemoryRegionSection will be in range.
With this patch, the enclosed testcase notices that the used ring does
not fit into the MSI-X table and prints a "qemu-system-x86_64: Cannot map used"
error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current default action of pausing a guest after a panic event
is received leaves the responsibility to resume guest execution to the
management layer. The reasons for this behavior are discussed here:
https://lore.kernel.org/qemu-devel/52148F88.5000509@redhat.com/
However, in instances like the case of older guests (Linux and
Windows) using a pvpanic device but missing support for the
PVPANIC_CRASHLOADED event, and Windows guests using the hv-crash
enlightenment, it is desirable to allow the guests to continue
running after sending a PVPANIC_PANICKED event. This allows such
guests to proceed to capture a crash dump and automatically reboot
without intervention of a management layer.
Add an option to avoid stopping a VM after a panic event is received,
by passing:
-action panic=none
in the command line arguments, or during runtime by using an upcoming
QMP command.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-3-git-send-email-alejandro.j.jimenez@oracle.com>
[Do not fix panic action in the variable, instead modify -no-shutdown. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several command line options currently in use are meant to modify
the behavior of QEMU in response to certain guest events like:
-no-reboot, -no-shutdown, -watchdog-action.
These can be grouped into a single option of the form:
-action event=action
Which can be used to specify the existing options above in the
following format:
-action reboot=none|shutdown
-action shutdown=poweroff|pause
-action watchdog=reset|shutdown|poweroff|pause|debug|none|inject-nmi
This is done in preparation for adding yet another option of this
type, which modifies the QEMU behavior when a guest panic occurs.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-2-git-send-email-alejandro.j.jimenez@oracle.com>
[Use QemuOpts help support, invoke QMP command. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a QMP command to allow for the behaviors specified by the
-no-reboot and -no-shutdown command line option to be set at runtime.
The new command is named set-action and takes optional arguments, named
after an event, that provide a corresponding action to take.
Example:
-> { "execute": "set-action",
"arguments": {
"reboot": "none",
"shutdown": "poweroff",
"watchdog": "debug" } }
<- { "return": {} }
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-4-git-send-email-alejandro.j.jimenez@oracle.com>
[Split the series differently, with -action based on the QMP command. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compute the DIRTY_MEMORY_CODE bit in memory_region_get_dirty_log_mask
instead of memory_region_init_*. This makes it possible to allocate
memory backend objects at any time.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_finish_machine_init currently can only exit QEMU if it fails.
Prepare for giving it proper error propagation, and possibly for
adding a plugin_add monitor command that calls an accelerator
method.
While at it, make all errors from plugin_load look the same.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Machine options can be retrieved as properties of the machine object.
Encourage that by removing the "easy" accessor to machine options.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Generalize the qdev_hotplug variable to the different phases of
machine initialization. We would like to allow different
monitor commands depending on the phase.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
machine_init_done is not the right flag to check when preconfig
is taken into account; for example "./qemu-system-x86_64 -serial
mon:stdio -preconfig" does not print the QEMU monitor header until after
exit_preconfig. Add back a custom bool for mux character devices. This
partially undoes commit c7278b4355 ("chardev: introduce chr_machine_done
hook", 2018-03-12), but it keeps the cleaner logic using a function
pointer in ChardevClass.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qdev_machine_creation_done is only setting a flag now. Extend it to
move more code out of vl.c. Leave only consistency checks and gdbserver
processing in qemu_machine_creation_done.
gdbserver_start can be moved after qdev_machine_creation_done because
it only does listen on the socket and creates some internal data
structures; it does not send any data (e.g. guest state) over the socket.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that there is no RUN_STATE_PRECONFIG anymore that can conflict with
RUN_STATE_INMIGRATE, we can allow -incoming defer with -preconfig.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move post-preconfig initialization to the x-exit-preconfig. If preconfig
is not requested, just exit preconfig mode immediately with the QMP
command.
As a result, the preconfig loop will run with accel_setup_post
and os_setup_post restrictions (xen_restrict, chroot, etc.)
already done.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preconfig state is only used if -incoming is not specified, which
makes the RunState state machine more tricky than it need be. However
there is already an equivalent condition which works even with -incoming,
namely qdev_hotplug. Use it instead of a separate runstate.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move everything related to Property and PropertyInfo to
qdev-properties.[ch] to make it easier to refactor that code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201211220529.2290218-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
split up the CpusAccel tcg_cpus into three TCG variants:
tcg_cpus_rr (single threaded, round robin cpus)
tcg_cpus_icount (same as rr, but with instruction counting enabled)
tcg_cpus_mttcg (multi-threaded cpus)
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201015143217.29337-2-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move more of them into MachineState, in preparation for moving initialization
of the machine out of vl.c.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
serial_hd(i) is NULL if and only if i >= serial_max_hds(). Test
serial_hd(i) instead of bounding the loop at serial_max_hds(),
thus removing one more function that vl.c is expected to export.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Complement the previous patch by starting the VM with a QMP command.
The plan is that the user will be able to do the same, invoking two
commands "finish-machine-init" and "cont" instead of
"x-exit-preconfig".
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make qemu_start_incoming_migration local to migration/migration.c.
By using the runstate instead of a separate flag, vl need not do
anything to setup deferred incoming migration.
qmp_migrate_incoming also does not need the deferred_incoming flag
anymore, because "-incoming PROTOCOL" will clear the "once" flag
before the main loop starts. Therefore, later invocations of
the migrate-incoming command will fail with the existing
"The incoming migration has already been started" error message.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The check has the same effect here, it only matters that it is performed
once all devices, both builtin and user-specified, have been created.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Displays should be available before the monitor starts, so that
it is possible to use the graphical console to interact with
the monitor itself.
This patch is quite ugly, but all this is temporary. The double
call to qemu_init_displays will go away as soon we can unify machine
initialization between the preconfig and "normal" flows, and so will
the preconfig_exit_requested variable (that is only preconfig_requested
remains).
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a bit nasty: the machine is storing a string and later
resolving it. We probably want to remove the memdev property
and instead make this a memory-set command. "-M memdev" can be
handled a legacy option that is special cased by
machine_set_property.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"Early" backends are created before the machine and can be used as
machine options.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move CHECKPOINT_INIT right before the machine initialization is
completed. Everything before is essentially an extension of
command line parsing.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no need to load plugins in the middle of default device processing,
move -plugin handling just before preconfig is entered.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create it together with other default backends, even though the processing is
done later.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_opts_set is used to create default network backends and to
parse sugar options -kernel, -initrd, -append, -bios and -dtb.
These are very different uses:
I would *expect* a function named qemu_opts_set to set an option in a
merge-lists QemuOptsList, such as -kernel, and possibly to set an option
in a non-merge-lists QemuOptsList with non-NULL id, similar to -set.
However, it wouldn't *work* to use qemu_opts_set for the latter
because qemu_opts_set uses fail_if_exists==1. So, for non-merge-lists
QemuOptsList and non-NULL id, the semantics of qemu_opts_set (fail if the
(QemuOptsList, id) pair already exists) are debatable.
On the other hand, I would not expect qemu_opts_set to create a
non-merge-lists QemuOpts with a single option; which it does, though.
For this case of non-merge-lists QemuOptsList and NULL id, qemu_opts_set
hardly adds value over qemu_opts_parse. It does skip some parsing and
unescaping, but that's not needed when creating default network
backends.
So qemu_opts_set has warty behavior for non-merge-lists QemuOptsList
if id is non-NULL, and it's mostly pointless if id is NULL. My
solution to keeping the API as simple as possible is to limit
qemu_opts_set to merge-lists QemuOptsList. For them, it's useful (we
don't want comma-unescaping for -kernel) *and* has sane semantics.
Network backend creation is switched to qemu_opts_parse.
qemu_opts_set is now only used on merge-lists QemuOptsList... except
in the testcase, which is changed to use a merge-list QemuOptsList.
With this change we can also remove the id parameter. With the
parameter always NULL, we know that qemu_opts_create cannot fail
and can pass &error_abort to it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Keep the machine initialization sequence free of miscellaneous command
line parsing actions.
The only difference is that preallocation will always be done with one
thread if -smp is not provided; previously it was using mc->default_cpus,
which is almost always 1 anyway.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just like -incoming. Later we will add support for "-incoming defer
-preconfig", because there are cases (Xen, block layer) that want
to look at RUNSTATE_INMIGRATE. -loadvm will remain mutually exclusive
with preconfig; the plan is to just do loadvm in the monitor, since
the user is already going to interact with it for preconfiguration.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The final part of qemu_init, starting with the completion of
board init, is already relatively clean. Split it out of
qemu_init so that qemu_init keeps only the messy parts.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Group a bunch of subsystem initializations that can be done right
after command line parsing. Remove initializations that can be done
simply as global variable initializers.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some very simple initialization routines can be nested in existing
subsystem-level functions, do that to simplify qemu_init.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Various options affect the global state of QEMU including the rest of
qemu_init, and they need to be called very early. Group them together
in a function that is called at the beginning.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no reason to prevent -preconfig -daemonize. Of course if
no monitor is defined there will be no way to start the VM,
but that is a user error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Once smp_parse is done, the validation operates on the MachineState.
There is no reason for that code to be in vl.c.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
bios_name was a legacy variable used by machine code, but it is
no more.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201026143028.3034018-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
address_space_write() returns a MemTxResult type.
Do not discard it, return it to the caller.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds support the kernel-irqchip option for
WHPX with on or off value. 'split' value is not supported
for the option. The option only works for the latest version
of Windows (ones that are coming out on Insiders). The
change maintains backward compatibility on older version of
Windows where this option is not supported.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB0880B13258DA9251F8459F4DC0170@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change to "expects a THING" where that's an obvious improvement
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-11-armbru@redhat.com>
We check that it exist at device creation time, so we don't have to
check anywhere else.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-22-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't need to walk the opts by hand. qmp_opt_get() already does
that. And then we can remove the functions that did that walk.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-21-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Just put allthe logic inside the same if.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-20-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Once there, remove not needed cast.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-3-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Device IOTLB invalidations can unmap arbitrary ranges, eiter outside of
the memory region or even [0, ~0ULL] for all the space. The assertion
could be hit by a guest, and rhel7 guest effectively hit it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20201116165506.31315-6-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This way we can tell between regular IOMMUTLBEntry (entry of IOMMU
hardware) and notifications.
In the notifications, we set explicitly if it is a MAPs or an UNMAP,
instead of trusting in entry permissions to differentiate them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20201116165506.31315-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Previous name didn't reflect the iommu operation.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20201116165506.31315-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It makes no sense to track dirty pages for those un-migratable memory
regions (e.g., Memory BAR region of the VFIO PCI device) and doing so
will potentially lead to some unpleasant issues during migration [1].
Skip dirty tracking for those regions by evaluating if the region is
migratable before setting dirty_log_mask (DIRTY_MEMORY_MIGRATION).
[1] https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg03757.html
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20201116132210.1730-1-yuzenghui@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
This patch contains all the files, whose maintainer I could not get
from ‘get_maintainer.pl’ script.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Adapted exec.c and qdev-monitor.c to new location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
It is not needed, all the callers are just saving what was
retrieved from -trace and trace_init_file can retrieve it
on its own.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20201102115841.4017692-1-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In COLO mode, if the startup parameters of QEMU include "no-shutdown",
QEMU will crash when the guest shutdown. The root cause is when the
guest shutdown, the state of VM will switch COLO to SHUTDOWN. When do
checkpoint again, the state will be changed to COLO. But the state
switch is undefined in runstate_transitions_def, we should add it.
This patch fixes the following:
qemu-system-x86_64: invalid runstate transition: 'shutdown' -> 'colo'
Aborted
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Lots of fixes all over the place.
virtio-mem and virtio-iommu patches are kind of fixes but
it seems better to just make them behave sanely than
try to educate users about the limitations ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl+i9YMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpySQH/Ru/sxB9PncR1HsqSf0HC0tt/EMKgyZTXEwQ
FITcjkCvBDS98a1VUvvZbjzTEDEZNnoUv94MjdLeBoptJ7GtK6nPoI6Ke0p1Zqbe
mlY2BCb0FpN8FE+mthjAI03mhw6o8Qo/OPtyISQzUxCVVqUHL5TRAVAQdeidoK8n
RBQ4WogwM/h7wI0d9GGgSxAON8IRQnBYImtzJieBb6zeScwKVFTWI1tqBdOyFN0/
AhzQiNZuhZ7a1XGJIsxmWB1NK2kcXNJuOF0ANh4coIHR0JzmH3xRy+Jnf5e3dYsw
LI23DUZPSTJJXAwKPucyTG7RTX8F55N9DVHC9KDRD6Ntq1oreJ4=
=pcbN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,vhost,virtio: fixes
Lots of fixes all over the place.
virtio-mem and virtio-iommu patches are kind of fixes but
it seems better to just make them behave sanely than
try to educate users about the limitations ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 04 Nov 2020 18:40:03 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (31 commits)
contrib/vhost-user-blk: fix get_config() information leak
block/export: fix vhost-user-blk get_config() information leak
block/export: make vhost-user-blk config space little-endian
configure: introduce --enable-vhost-user-blk-server
libvhost-user: follow QEMU comment style
vhost-blk: set features before setting inflight feature
Revert "vhost-blk: set features before setting inflight feature"
net: Add vhost-vdpa in show_netdevs()
vhost-vdpa: Add qemu_close in vhost_vdpa_cleanup
vfio: Don't issue full 2^64 unmap
virtio-iommu: Set supported page size mask
vfio: Set IOMMU page size as per host supported page size
memory: Add interface to set iommu page size mask
virtio-iommu: Add notify_flag_changed() memory region callback
virtio-iommu: Add replay() memory region callback
virtio-iommu: Call memory notifiers in attach/detach
virtio-iommu: Add memory notifiers for map/unmap
virtio-iommu: Store memory region in endpoint struct
virtio-iommu: Fix virtio_iommu_mr()
hw/smbios: Fix leaked fd in save_opt_one() error path
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eventfd can be registered with a zero length when fast_mmio is true.
Handle this case properly when dispatching through QEMU.
Signed-off-by: Elena Afanasova <eafanasova@gmail.com>
Message-id: cf71a62eb04e61932ff8ffdd02e0b2aab4f495a0.camel@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu_semihosting_console_init uses semihosting.chardev which is set
by qemu_semihosting_connect_chardevs. Thus qemu_semihosting_connect_chardevs
has to be called first.
Both have to be called after processing -serial and friends though, so
that the semihosting console can connect to a multiplexer as in
"-serial mon:stdio -semihosting-config chardev=serial0"
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: 619985e937 ("semihosting: defer connect_chardevs a little more to use serialx", 2020-07-27)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We removed the global_locking field in commit 4174495408,
leaving dead code around the 'unlocked' variable. Remove it
to fix the DEADCODE issue reported by Coverity (CID 1432876).
Fixes: 4174495408 ("exec: Remove MemoryRegion::global_locking field")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201030153752.1557776-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow to set the page size mask supported by an iommu memory region.
This enables a vIOMMU to communicate the page size granule supported by
an assigned device, on hosts that use page sizes greater than 4kB.
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20201030180510.747225-8-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
mr->ram_block is NULL when mr->is_iommu is true, then fr.dirty_log_mask
wasn't set correctly due to which memory listener's log_sync doesn't
get called.
This patch returns log_mask with DIRTY_MEMORY_MIGRATION set when
IOMMU is enabled.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Get rid of yet another global variable.
The default will be hpet=on only if CONFIG_HPET=y.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20201021144716.1536388-1-ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Fix for Xen dummy cpu loop (which happened due to qtest accel rework)
* Introduction of the generic device fuzzer
* Run more check-acceptance tests in the gitlab-CI
-----BEGIN PGP SIGNATURE-----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=ZpMy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-10-26' into staging
* qtest fixes (e.g. memory leaks)
* Fix for Xen dummy cpu loop (which happened due to qtest accel rework)
* Introduction of the generic device fuzzer
* Run more check-acceptance tests in the gitlab-CI
# gpg: Signature made Mon 26 Oct 2020 09:34:04 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-10-26: (31 commits)
tests/acceptance: Use .ppm extention for Portable PixMap files
tests/acceptance: Remove unused import
test/docker/dockerfiles: Add missing packages for acceptance tests
tests/acceptance: Enable AVOCADO_ALLOW_UNTRUSTED_CODE in the gitlab-CI
test/acceptance: Remove the CONTINUOUS_INTEGRATION tags
tests/acceptance/ppc_prep_40p: Fix the URL to the NetBSD-4.0 archive
scripts/oss-fuzz: ignore the generic-fuzz target
scripts/oss-fuzz: use hardlinks instead of copying
fuzz: register predefined generic-fuzz configs
fuzz: add generic-fuzz configs for oss-fuzz
fuzz: add an "opaque" to the FuzzTarget struct
fuzz: Add instructions for using generic-fuzz
scripts/oss-fuzz: Add crash trace minimization script
scripts/oss-fuzz: Add script to reorder a generic-fuzzer trace
fuzz: add a crossover function to generic-fuzzer
fuzz: add a DISABLE_PCI op to generic-fuzzer
fuzz: Add support for custom crossover functions
fuzz: Add fuzzer callbacks to DMA-read functions
fuzz: Declare DMA Read callback function
fuzz: Add DMA support to the generic-fuzzer
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Initialize the object's values from the class when the object is
created, no need to have vl.c do it for us.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up vl.c, default min/max/default_cpus to uniprocessor
directly in the QOM class initialization code.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should be careful to not call any functions besides fuzz_dma_read_cb.
Without --enable-fuzzing, fuzz_dma_read_cb is an empty inlined function.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-7-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch declares the fuzz_dma_read_cb function and uses the
preprocessor and linker(weak symbols) to handle these cases:
When we build softmmu/all with --enable-fuzzing, there should be no
strong symbol defined for fuzz_dma_read_cb, and we link against a weak
stub function.
When we build softmmu/fuzz with --enable-fuzzing, we link against the
strong symbol in generic_fuzz.c
When we build softmmu/all without --enable-fuzzing, fuzz_dma_read_cb is
an empty, inlined function. As long as we don't call any other functions
when building the arguments, there should be no overhead.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-6-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-2-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
By making use of libvhost-user, block device drive can be shared to
the connected vhost-user client. Only one client can connect to the
server one time.
Since vhost-user-server needs a block drive to be created first, delay
the creation of this object.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200918080912.321299-6-coiby.xu@gmail.com
[Shorten "vhost_user_blk_server" string to "vhost_user_blk" to avoid the
following compiler warning:
../block/export/vhost-user-blk-server.c:178:50: error: ‘%s’ directive output truncated writing 21 bytes into a region of size 20 [-Werror=format-truncation=]
and fix "Invalid size %ld ..." ssize_t format string arguments for
32-bit hosts.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The option has never been mentioned in our documentation, it's been
deprecated since years, it's marked with QEMU_ARCH_I386 (which does
not make sense anymore since KVM is available on other architectures,
too), it does not do anything by default in upstream QEMU (since TCG
is the default here anyway), and we're spending too much precious time
each year discussing whether it makes sense to keep this option as a
nice suger or not... let's finally put an end on this and remove it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201020160504.62460-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case the spice opts are not registered, try loading the spice module.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-10-kraxel@redhat.com
Restricting 'inject-nmi' to machine.json pulls slightly
less QAPI-generated code into user-mode and tools.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-2-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Initialize spice before chardevs. That allows to register the spice
chardevs directly in the init function and removes the need to maintain
a linked list of chardevs just for registration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201014121120.13482-5-kraxel@redhat.com
Add mayfail bool parameter to module loading functions. Set it to true
for module_load_qom_all() because device modules might not load into all
system emulation variants. qemu-system-s390x for example will not load
qxl because it lacks vga support. Makes "make check" less chatty.
Drop module_loaded_qom_all check in module_load_qom_one to make sure we
see errors for explicit load requests, i.e. module_load_qom_one("qxl")
failing will log an error no matter whenever module_load_qom_all() was
called before or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200923091217.22662-1-kraxel@redhat.com
downtime in migration test, less verbose output when running w/o KVM)
* Improve handling of acceptance tests in the Gitlab-CI
* Run checkpatch.pl in the Gitlab-CI
* Improve the gitlab-pipeline-status script
* Misc patches (mark 'moxie' as deprecated, remove stale .gitignore files, ...)
-----BEGIN PGP SIGNATURE-----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=lCRK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-10-13' into staging
* qtest improvements (test for crash found with the fuzzer, increase
downtime in migration test, less verbose output when running w/o KVM)
* Improve handling of acceptance tests in the Gitlab-CI
* Run checkpatch.pl in the Gitlab-CI
* Improve the gitlab-pipeline-status script
* Misc patches (mark 'moxie' as deprecated, remove stale .gitignore files, ...)
# gpg: Signature made Tue 13 Oct 2020 11:49:06 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-10-13: (23 commits)
scripts/ci/gitlab-pipeline-status: wait for pipeline creation
scripts/ci/gitlab-pipeline-status: use more descriptive exceptions
scripts/ci/gitlab-pipeline-status: handle keyboard interrupts
scripts/ci/gitlab-pipeline-status: refactor parser creation
scripts/ci/gitlab-pipeline-status: give early feedback on running pipelines
scripts/ci/gitlab-pipeline-status: improve message regarding timeout
scripts/ci/gitlab-pipeline-status: make branch name configurable
gitlab: assign python helper files to GitLab maintainers section
gitlab: add a CI job to validate the DCO sign off
gitlab: add a CI job for running checkpatch.pl
configure: fixes indent of $meson setup
docs/system/deprecated: Mark the 'moxie' CPU as deprecated
Remove superfluous .gitignore files
MAINTAINERS: Ignore bios-tables-test in the qtest section
Add a comment in bios-tables-test.c to clarify the reason behind approach
softmmu/vl: Be less verbose about missing KVM when running the qtests
tests/migration: Allow longer timeouts
qtest: add fuzz test case
Acceptance tests: show test report on GitLab CI
Acceptance tests: do not show canceled test logs on GitLab CI
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Log invalid memory accesses with as GUEST_ERROR.
This is particularly useful since commit 5d971f9e67 which reverted
("memory: accept mismatching sizes in memory_region_access_valid").
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20201005152725.2143444-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some of the qtests use "-accel kvm -accel tcg" to run real guest code.
This causes some error messages when kvm is not available. We do not
really care about these messages since the fallback to tcg is expected
here. So let's silence them to avoid that they spoil the output of
the tests.
Unfortunately, we can not use the qtest_enabled() wrapper in this case,
since the qtest accelerator itself is not initialized. Thus we have to
test for the qtest_chrdev variable instead.
Message-Id: <20200710085020.28222-1-thuth@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Soon, a device removal might only happen on RCU callback execution.
This is okay for device-del which provides a DEVICE_DELETED event,
but not for the failure case of device-add. To avoid changing
monitor semantics, just drain all pending RCU callbacks on error.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200913160259.32145-4-mlevitsk@redhat.com>
[Don't use it in qmp_device_del. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include the QTest Protocol doc string in docs/devel/qtest.rst,
after converting it to use Sphinx syntax.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201005205228.697463-3-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Over the years, most parts of exec.c that were not specific to softmmu
have been moved to accel/tcg; what's left is mostly the low-level part
of the memory API, which includes RAMBlock and AddressSpaceDispatch.
However exec.c also hosts 4-500 lines of code for the target specific
parts of the CPU QOM object, plus a few functions for user-mode
emulation that do not have a better place (they are not TCG-specific so
accel/tcg/user-exec.c is not a good place either).
Move these parts to a new file, so that exec.c can be moved to
softmmu/physmem.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Most callers actually don't have to rely on cur_mon, but already know
for which monitor they call monitor_get_cpu_index().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-3-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch adds support of the reverse continue operation for gdbstub.
Reverse continue finds the last breakpoint that would happen in normal
execution from the beginning to the current moment.
Implementation of the reverse continue replays the execution twice:
to find the breakpoints that were hit and to seek to the last breakpoint.
Reverse continue loads the previous snapshot and tries to find the breakpoint
since that moment. If there are no such breakpoints, it proceeds to
the earlier snapshot, and so on. When no breakpoints or watchpoints were
hit at all, execution stops at the beginning of the replay log.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <160174522930.12451.6994758004725016836.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GDB remote protocol supports two reverse debugging commands:
reverse step and reverse continue.
This patch adds support of the first one to the gdbstub.
Reverse step is intended to step one instruction in the backwards
direction. This is not possible in regular execution.
But replayed execution is deterministic, therefore we can load one of
the prior snapshots and proceed to the desired step. It is equivalent
to stepping one instruction back.
There should be at least one snapshot preceding the debugged part of
the replay log.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
--
v4 changes:
- inverted condition in cpu_handle_guest_debug (suggested by Alex Bennée)
Message-Id: <160174522341.12451.1498758422543765253.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm: uses the generic handler
qtest: uses the generic handler
whpx: changed to use the generic handler (identical implementation)
hax: changed to use the generic handler (identical implementation)
hvf: changed to use the generic handler (identical implementation)
tcg: adapt tcg-cpus to point to the tcg-specific handler
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
now that all accelerators support the CpusAccel interface,
we can remove most checks for non-NULL cpus_accel,
we just add a sanity check/assert at vcpu creation.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
register a "CpusAccel" interface for HVF as well.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
[added const]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
register a "CpusAccel" interface for WHPX as well.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
register a "CpusAccel" interface for HAX as well.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
register a "CpusAccel" interface for KVM as well.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[added const]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
register a "CpusAccel" interface for qtest as well.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCG is the first accelerator to register a "CpusAccel" interface
on initialization, providing functions for starting a vcpu,
kicking a vcpu, sychronizing state and getting virtual clock
and ticks.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[added const]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new interface starts unused, will start being used by the
next patches.
It provides methods for each accelerator to start a vcpu, kick a vcpu,
synchronize state, get cpu virtual clock and elapsed ticks.
In qemu_wait_io_event, make it clear that APC is used only for HAX
on Windows.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
refactoring of cpus.c continues with cpu timer state extraction.
cpu-timers: responsible for the softmmu cpu timers state,
including cpu clocks and ticks.
icount: counts the TCG instructions executed. As such it is specific to
the TCG accelerator. Therefore, it is built only under CONFIG_TCG.
One complication is due to qtest, which uses an icount field to warp time
as part of qtest (qtest_clock_warp).
In order to solve this problem, provide a separate counter for qtest.
This requires fixing assumptions scattered in the code that
qtest_enabled() implies icount_enabled(), checking each specific case.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[remove redundant initialization with qemu_spice_init]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[fix lingering calls to icount_get]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Last uses of memory_region_clear_global_locking() have been
removed in commit 7070e085d4 ("acpi: mark PMTIMER as unlocked")
and commit 08565552f7 ("cputlb: Move NOTDIRTY handling from I/O
path to TLB path").
Remove memory_region_clear_global_locking() and the now unused
'global_locking' field in MemoryRegion.
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200806150726.962-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Restricting the balloon-related commands to machine.json pulls less
QAPI-generated code into user-mode.
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-4-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
Commit c7f419f584 moved softmmu-only files out of the root
directory, but forgot to move the trace events, which should
no longer be generated to "trace-root.h". Fix that by adding
softmmu/trace-events.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-id: 20200805130221.24487-1-philmd@redhat.com
[Rebased onto meson.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Do not set parallel_cpus if there is only one cpu instantiated.
This will allow tcg to use serial code to implement atomics.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The binaries move to the root directory, e.g. qemu-system-i386 or
qemu-arm. This requires changes to qtests, CI, etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split between CFLAGS/QEMU_CFLAGS and CXXFLAGS/QEMU_CXXFLAGS so that
we will use CFLAGS and CXXFLAGS for flags that we do not want to
pass to add_project_arguments.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With that we can just use -semihosting-config chardev=serial0.
[AJB: tweak commit message]
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1592215252-26742-1-git-send-email-frederic.konrad@adacore.com>
Message-Id: <20200724064509.331-3-alex.bennee@linaro.org>
This reverts commit d10e05f15d.
We report some -tpmdev failures, but then continue as if all was fine.
Reproducer:
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -chardev null,id=tpm0 -tpmdev emulator,id=tpm0,chardev=chrtpm -device tpm-tis,tpmdev=tpm0
qemu-system-x86_64: -tpmdev emulator,id=tpm0,chardev=chrtpm: tpm-emulator: tpm chardev 'chrtpm' not found.
qemu-system-x86_64: -tpmdev emulator,id=tpm0,chardev=chrtpm: tpm-emulator: Could not cleanly shutdown the TPM: No such file or directory
QEMU 5.0.90 monitor - type 'help' for more information
(qemu) qemu-system-x86_64: -device tpm-tis,tpmdev=tpm0: Property 'tpm-tis.tpmdev' can't find value 'tpm0'
$ echo $?
1
This is a regression caused by commit d10e05f15d "tpm: Clean up error
reporting in tpm_init_tpmdev()". It's incomplete: be->create(opts)
continues to use error_report(), and we don't set an error when it
fails.
I figure converting the create() methods to Error would make some
sense, but I'm not sure it's worth the effort right now. Revert the
broken commit instead, and add a comment to tpm_init_tpmdev().
Straightforward conflict in tpm.c resolved.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Commits b6d7e9b66f..a43770df5d simplified the error propagation.
Similarly to commit 6fd5bef10b "qom: Make functions taking Error**
return bool, not void", let fw_cfg_add_from_generator() return a
boolean value, not void.
This allow to simplify parse_fw_cfg() and fixes the error handling
issue reported by Coverity (CID 1430396):
In parse_fw_cfg():
Variable assigned once to a constant guards dead code.
Local variable local_err is assigned only once, to a constant
value, making it effectively constant throughout its scope.
If this is not the intent, examine the logic to see if there
is a missing assignment that would make local_err not remain
constant.
It's the call of fw_cfg_add_from_generator():
Error *local_err = NULL;
fw_cfg_add_from_generator(fw_cfg, name, gen_id, errp);
if (local_err) {
error_propagate(errp, local_err);
return -1;
}
return 0;
If it fails, parse_fw_cfg() sets an error and returns 0, which is
wrong. Harmless, because the only caller passes &error_fatal.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: Coverity CID 1430396: 'Constant' variable guards dead code (DEADCODE)
Fixes: 6552d87c48 ("softmmu/vl: Let -fw_cfg option take a 'gen_id' argument")
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200721131911.27380-3-philmd@redhat.com>
object_get_canonical_path_component() returns a malloced copy of a
property name on success, null on failure.
19 of its 25 callers immediately free the returned copy.
Change object_get_canonical_path_component() to return the property
name directly. Since modifying the name would be wrong, adjust the
return type to const char *.
Drop the free from the 19 callers become simpler, add the g_strdup()
to the other six.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200714160202.3121879-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Michael started to work on the AVR port few years ago [*] and kept
improving the code over various series.
List of people who help him (in chronological order):
- Richard Henderson
- Sarah Harris and Edward Robbins
- Philippe Mathieu-Daudé and Aleksandar Markovic
- Pavel Dovgalyuk
- Thomas Huth
[*] The oldest contribution I could find on the list is from 2016:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html
Tests included:
$ avocado --show=app run -t arch:avr tests/acceptance/
Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos
(1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 2.35 s
$ make check-qtest-avr
TEST check-qtest-avr: tests/qtest/boot-serial-test
TEST check-qtest-avr: tests/qtest/cdrom-test
TEST check-qtest-avr: tests/qtest/device-introspect-test
TEST check-qtest-avr: tests/qtest/machine-none-test
TEST check-qtest-avr: tests/qtest/qmp-test
TEST check-qtest-avr: tests/qtest/qmp-cmd-test
TEST check-qtest-avr: tests/qtest/qom-test
TEST check-qtest-avr: tests/qtest/test-hmp
TEST check-qtest-avr: tests/qtest/qos-test
CI results:
. https://cirrus-ci.com/build/5697049146425344
. https://gitlab.com/philmd/qemu/-/pipelines/165328058
. https://travis-ci.org/github/philmd/qemu/builds/705817933
. https://app.shippable.com/github/philmd/qemu/runs/822/summary/console
-----BEGIN PGP SIGNATURE-----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=gFE5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/avr-port-20200711' into staging
8bit AVR port from Michael Rolnik.
Michael started to work on the AVR port few years ago [*] and kept
improving the code over various series.
List of people who help him (in chronological order):
- Richard Henderson
- Sarah Harris and Edward Robbins
- Philippe Mathieu-Daudé and Aleksandar Markovic
- Pavel Dovgalyuk
- Thomas Huth
[*] The oldest contribution I could find on the list is from 2016:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html
Tests included:
$ avocado --show=app run -t arch:avr tests/acceptance/
Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos
(1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 2.35 s
$ make check-qtest-avr
TEST check-qtest-avr: tests/qtest/boot-serial-test
TEST check-qtest-avr: tests/qtest/cdrom-test
TEST check-qtest-avr: tests/qtest/device-introspect-test
TEST check-qtest-avr: tests/qtest/machine-none-test
TEST check-qtest-avr: tests/qtest/qmp-test
TEST check-qtest-avr: tests/qtest/qmp-cmd-test
TEST check-qtest-avr: tests/qtest/qom-test
TEST check-qtest-avr: tests/qtest/test-hmp
TEST check-qtest-avr: tests/qtest/qos-test
CI results:
. https://cirrus-ci.com/build/5697049146425344
. https://gitlab.com/philmd/qemu/-/pipelines/165328058
. https://travis-ci.org/github/philmd/qemu/builds/705817933
. https://app.shippable.com/github/philmd/qemu/runs/822/summary/console
# gpg: Signature made Sat 11 Jul 2020 10:03:11 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/avr-port-20200711: (32 commits)
target/avr/disas: Fix store instructions display order
target/avr/cpu: Fix $PC displayed address
target/avr/cpu: Drop tlb_flush() in avr_cpu_reset()
target/avr: Add section into QEMU documentation
tests/acceptance: Test the Arduino MEGA2560 board
tests/boot-serial: Test some Arduino boards (AVR based)
hw/avr: Add limited support for some Arduino boards
hw/avr: Add some ATmega microcontrollers
hw/avr: Add support for loading ELF/raw binaries
hw/misc: avr: Add limited support for power reduction device
hw/timer: avr: Add limited support for 16-bit timer peripheral
hw/char: avr: Add limited support for USART peripheral
tests/machine-none: Add AVR support
target/avr: Register AVR support with the rest of QEMU
target/avr: Add support for disassembling via option '-d in_asm'
target/avr: Initialize TCG register variables
target/avr: Add instruction translation - CPU main translation function
target/avr: Add instruction translation - MCU Control Instructions
target/avr: Add instruction translation - Bit and Bit-test Instructions
target/avr: Add instruction translation - Data Transfer Instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The new -accel option does not accept colons in the parameters anymore
(since it does not convert the parameters to -machine accel=... parameters
anymore). Thus we can now remove the check for colons in -accel:
$ qemu-system-x86_64 -accel kvm:tcg
qemu-system-x86_64: -accel kvm:tcg: invalid accelerator kvm:tcg
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20200618074001.13642-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
move the vcpu throttling functionality into its own module.
This functionality is not specific to any accelerator,
and it is used currently by migration to slow down guests to try to
have migrations converge, and by the cocoa MacOS UI to throttle speed.
cpu-throttle contains the controls to adjust and inspect throttle
settings, start (set) and stop vcpu throttling, and the throttling
function itself that is run periodically on vcpus to make them take a nap.
Execution of the throttling function on all vcpus is triggered by a timer,
registered at module initialization.
No functionality change.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200629093504.3228-3-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
move arch_init, balloon, cpus, ioport, memory, memory_mapping, qtest.
They are all specific to CONFIG_SOFTMMU.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200629093504.3228-2-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is followup patch to the one submitted back in Oct, 19
https://lists.gnu.org/archive/html/qemu-devel/2019-10/msg02102.html
My mistake here, I took my eyes of the mailing list after I got the
initial thumbs up. This patch follows up on Markus comments in the
above link.
Purpose of this patch:
We want to print guest name for errors, warnings and info messages. This
was the first of two patches the second being MCE errors targeting a VM
with guest name prepended. But in a large fleet we see many other
errors that disable a VM or crash it. In a large fleet and centralized
logging having the guest name enables identify of owner and customer.
Signed-off-by: Mario Smarduch <msmarduch@digitalocean.com>
Message-Id: <20200626201900.8876-1-msmarduch@digitalocean.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
The previous commit enables conversion of
foo(..., &err);
if (err) {
...
}
to
if (!foo(..., errp)) {
...
}
for QOM functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun = {
object_apply_global_props, object_initialize_child_with_props,
object_initialize_child_with_propsv, object_property_get,
object_property_get_bool, object_property_parse, object_property_set,
object_property_set_bool, object_property_set_int,
object_property_set_link, object_property_set_qobject,
object_property_set_str, object_property_set_uint, object_set_props,
object_set_propv, user_creatable_add_dict,
user_creatable_complete, user_creatable_del
};
expression list args, args2;
typedef Error;
Error *err;
@@
- fun(args, &err, args2);
- if (err)
+ if (!fun(args, &err, args2))
{
...
}
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-29-armbru@redhat.com>
The object_property_set_FOO() setters take property name and value in
an unusual order:
void object_property_set_FOO(Object *obj, FOO_TYPE value,
const char *name, Error **errp)
Having to pass value before name feels grating. Swap them.
Same for object_property_set(), object_property_get(), and
object_property_parse().
Convert callers with this Coccinelle script:
@@
identifier fun = {
object_property_get, object_property_parse, object_property_set_str,
object_property_set_link, object_property_set_bool,
object_property_set_int, object_property_set_uint, object_property_set,
object_property_set_qobject
};
expression obj, v, name, errp;
@@
- fun(obj, v, name, errp)
+ fun(obj, name, v, errp)
Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Convert that one manually.
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually. The other files using RXCPU that way don't need
conversion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
- add the tls-cipher-suites object,
- add the ability to QOM objects to produce data consumable
by the fw_cfg device,
- let the tls-cipher-suites object implement the
FW_CFG_DATA_GENERATOR interface.
This is required by EDK2 'HTTPS Boot' feature of OVMF to tell
the guest which TLS ciphers it can use.
CI jobs results:
https://travis-ci.org/github/philmd/qemu/builds/704724619https://gitlab.com/philmd/qemu/-/pipelines/162938106https://cirrus-ci.com/build/4682977303068672
-----BEGIN PGP SIGNATURE-----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=QArU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/fw_cfg-20200704' into staging
firmware (and crypto) patches
- add the tls-cipher-suites object,
- add the ability to QOM objects to produce data consumable
by the fw_cfg device,
- let the tls-cipher-suites object implement the
FW_CFG_DATA_GENERATOR interface.
This is required by EDK2 'HTTPS Boot' feature of OVMF to tell
the guest which TLS ciphers it can use.
CI jobs results:
https://travis-ci.org/github/philmd/qemu/builds/704724619https://gitlab.com/philmd/qemu/-/pipelines/162938106https://cirrus-ci.com/build/4682977303068672
# gpg: Signature made Sat 04 Jul 2020 17:37:08 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/fw_cfg-20200704:
crypto/tls-cipher-suites: Produce fw_cfg consumable blob
softmmu/vl: Allow -fw_cfg 'gen_id' option to use the 'etc/' namespace
softmmu/vl: Let -fw_cfg option take a 'gen_id' argument
hw/nvram/fw_cfg: Add the FW_CFG_DATA_GENERATOR interface
crypto: Add tls-cipher-suites object
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hook module loading into the places where we
need it when building devices as modules.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200624131045.14512-4-kraxel@redhat.com
audiodev must be initialized before machine_set_property
so the machine can have audiodev property aliases.
spice must initialize before audiodev because the default
audiodev is spice only in case spice is actually enabled.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200702132525.6849-15-kraxel@redhat.com
The qtest_enabled check introduced in d6919e4 always returns false, as
it is called prior to configure_accelerators(). Instead of trying to
skip rcu_disable_atfork in qemu_main, simply call rcu_enable_atfork in
the fuzzer, after qemu_main returns.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200618160516.2817-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Names of user-provided fw_cfg items are supposed to start
with "opt/". However FW_CFG_DATA_GENERATOR items are generated
by QEMU, so allow the "etc/" namespace in this specific case.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200623172726.21040-5-philmd@redhat.com>
The 'gen_id' argument refers to a QOM object able to produce
data consumable by the fw_cfg device. The producer object must
implement the FW_CFG_DATA_GENERATOR interface.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200623172726.21040-4-philmd@redhat.com>
Drives with interface types other than if=none are for onboard
devices. Unfortunately, any such drives the board doesn't pick up can
still be used with -device, like this:
$ qemu-system-x86_64 -nodefaults -display none -S -drive if=floppy,id=bogus,unit=7 -device ide-cd,drive=bogus -monitor stdio
QEMU 5.0.50 monitor - type 'help' for more information
(qemu) info block
bogus: [not inserted]
Attached to: /machine/peripheral-anon/device[0]
Removable device: not locked, tray closed
(qemu) info qtree
bus: main-system-bus
type System
[...]
bus: ide.1
type IDE
dev: ide-cd, id ""
---> drive = "bogus"
[...]
unit = 0 (0x0)
[...]
This kind of abuse has always worked. Deprecate it:
qemu-system-x86_64: -drive if=floppy,id=bogus,unit=7: warning: bogus if=floppy is deprecated, use if=none
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-9-armbru@redhat.com>
This code is not related to hardware emulation.
Move it under accel/ with the other hypervisors.
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200508100222.7112-1-philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Default RAM backend depends on numa_uses_legacy_mem(), which is
infulenced by -numa options on CLI or set-numa-node QMP command
at preconfig time. If QEMU is started with '-preconfig'
without -numa, it will lead to creating default RAM backend
even if later set-numa-node is used to assing RAM to NUMA nodes
using 'memdev' NUMA option.
That at best will waste RAM object created by default and with
next patch adding a check to prevent usage of conflicting
'-M memory-backend' and '-numa memdev'
options, it will make QEMU error out if user tries to configure
NUMA at preconfig time with memdev option, making set-numa-node
unusable.
To fix issue, move preconfig loop before default RAM backend is
created, so that numa_uses_legacy_mem() would take into account
effects of set-numa-node commands executed at preconfig time.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200511141103.43768-2-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows us to keep pc-bios in executable_dir/pc-bios, rather than
executable_dir/../pc-bios, which is incompatible with oss-fuzz' file
structure.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200512030133.29896-2-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
Specifically explain what users should do in case they don't use
-display yet and depend on the qemu picking the ui for them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200407093617.10058-1-kraxel@redhat.com
The second argument 'id' is a pointer. Pass NULL rather than 0.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Message-Id: <20200427005704.2475782-1-masahiroy@kernel.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
the former is not actually used by explicit backend, so instead of
silently ignoring the option in non valid context, exit with error.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200409134133.11339-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit a1b18df9a4, broke virt_kvm_type() logic, which depends on
maxram_size, ram_size, ram_slots being parsed/set on machine instance
at the time accelerator (KVM) is initialized.
set_memory_options() part was already reverted by commit 2a7b18a320,
so revert remaining initialization of above machine fields to make
virt_kvm_type() work as it used to.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Auger Eric <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200326112829.19989-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Older QEMU versions did fixup the ram size to match what can be reported
via sclp. We need to mimic this behaviour for machine types 4.2 and
older to not fail on inbound migration for memory sizes that do not fit.
Old machines with proper aligned memory sizes are not affected.
Alignment table:
VM size (<=) | Alignment
--------------------------
1020M | 1M
2040M | 2M
4080M | 4M
8160M | 8M
16320M | 16M
32640M | 32M
65280M | 64M
130560M | 128M
261120M | 256M
522240M | 512M
1044480M | 1G
2088960M | 2G
4177920M | 4G
8355840M | 8G
Suggested action is to replace unaligned -m value with a suitable
aligned one or if a change to a newer machine type is possible, use a
machine version >= 5.0.
A future version might remove the compatibility handling.
For machine types >= 5.0 we can simply use an increment size of 1M and
use the full range of increment number which allows for all possible
memory sizes. The old limitation of having a maximum of 1020 increments
was added for standby memory, which we no longer support. With that we
can now support even weird memory sizes like 10001234 MB.
As we no longer fixup maxram_size as well, make other users use ram_size
instead. Keep using maxram_size when setting the maximum ram size in KVM,
as that will come in handy in the future when supporting memory hotplug
(in contrast, storage keys and storage attributes for hotplugged memory
will have to be migrated per RAM block in the future).
Fixes: 3a12fc61af ("390x/s390-virtio-ccw: use memdev for RAM")
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200401123754.109602-1-borntraeger@de.ibm.com>
[CH: fixed up message on memory size fixup]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Remove the global acpi_enabled bool and replace it with an
acpi OnOffAuto machine property.
qemu throws an error now if you use -no-acpi while the machine
type you are using doesn't support acpi in the first place.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200320100136.11717-1-kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Migration from QEMU(v4.0) fails when using 3.1 or older machine
type. For example if one attempts to migrate
QEMU-2.12 started as
qemu-system-ppc64 -nodefaults -M pseries-2.12 -m 4096 -mem-path /tmp/
to current master, it will fail with
qemu-system-ppc64: Unknown ramblock "ppc_spapr.ram", cannot accept migration
qemu-system-ppc64: error while loading state for instance 0x0 of device 'ram'
qemu-system-ppc64: load of migration failed: Invalid argument
Caused by 900c0ba373 commit which switches main RAM allocation to
memory backends and the fact in 3.1 and older QEMU, backends used
full[***] QOM path as memory region name instead of backend's name.
That was changed after 3.1 to use prefix-less names by default
(fa0cb34d22) for new machine types.
*** effectively makes main RAM memory region names defined by
MachineClass::default_ram_id being altered with '/objects/' prefix
and therefore migration fails as old QEMU sends prefix-less
name while new QEMU expects name with prefix when using 3.1 and
older machine types.
Fix it by forcing implicit[1] memory backend to always use
prefix-less names for its memory region by setting
'x-use-canonical-path-for-ramblock-id'
property to false.
1) i.e. memory backend created by compat glue which maps
-m/-mem-path/-mem-prealloc/default RAM size into
appropriate backend type/options to match old CLI format.
Fixes: 900c0ba373
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Message-Id: <20200304172748.15338-1-imammedo@redhat.com>
Tested-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Store the smp sockets in CpuTopology. The socket information required to
build the apic id in EPYC mode. Right now socket information is not passed
to down when decoding the apic id. Add the socket information here.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <158396718647.58170.2278448323151215741.stgit@naples-babu.amd.com>
Currently if you try to ask for the list of CPUs for a target
architecture which does not specify a default machine type
you just get an error:
$ qemu-system-arm -cpu help
qemu-system-arm: No machine specified, and there is no default
Use -machine help to list supported machines
Since the list of CPUs doesn't depend on the machine, this is
unnecessarily unhelpful. "-device help" has a similar problem.
Move the checks for "did the user ask for -cpu help or -device help"
up so they precede the select_machine() call which checks that the
user specified a valid machine type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vl.c calls machine_usb() declared in "hw/boards.h". Include it.
This fixes (when modifying unrelated headers):
vl.c:1283:10: error: implicit declaration of function 'machine_usb' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
if (!machine_usb(current_machine)) {
^
vl.c:1283:10: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
vl.c:1283:22: error: use of undeclared identifier 'current_machine'
if (!machine_usb(current_machine)) {
^
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200228114649.12818-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It would be confusing to have multiple default machines.
Abort if this ever occurs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200207161948.15972-4-philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
So we don't have to compile everything in, or have ifdefs
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit a1b18df9a4 moved -m option parsing after configure_accelerators()
that broke TCG accelerator initialization which accesses global ram_size
from size_code_gen_buffer() which is equal to 0 at that moment.
Partially revert a1b18df9a4, by returning set_memory_options() to its
original location and only keep 32-bit host VA check and 'memory-backend'
size check introduced by fe64d06afc at current place.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This series removes ad hoc RAM allocation API (memory_region_allocate_system_memory)
and consolidates it around hostmem backend. It allows to
* resolve conflicts between global -mem-prealloc and hostmem's "policy" option,
fixing premature allocation before binding policy is applied
* simplify complicated memory allocation routines which had to deal with 2 ways
to allocate RAM.
* reuse hostmem backends of a choice for main RAM without adding extra CLI
options to duplicate hostmem features. A recent case was -mem-shared, to
enable vhost-user on targets that don't support hostmem backends [1] (ex: s390)
* move RAM allocation from individual boards into generic machine code and
provide them with prepared MemoryRegion.
* clean up deprecated NUMA features which were tied to the old API (see patches)
- "numa: remove deprecated -mem-path fallback to anonymous RAM"
- (POSTPONED, waiting on libvirt side) "forbid '-numa node,mem' for 5.0 and newer machine types"
- (POSTPONED) "numa: remove deprecated implicit RAM distribution between nodes"
Introduce a new machine.memory-backend property and wrapper code that aliases
global -mem-path and -mem-alloc into automatically created hostmem backend
properties (provided memory-backend was not set explicitly given by user).
A bulk of trivial patches then follow to incrementally convert individual
boards to using machine.memory-backend provided MemoryRegion.
Board conversion typically involves:
* providing MachineClass::default_ram_size and MachineClass::default_ram_id
so generic code could create default backend if user didn't explicitly provide
memory-backend or -m options
* dropping memory_region_allocate_system_memory() call
* using convenience MachineState::ram MemoryRegion, which points to MemoryRegion
allocated by ram-memdev
On top of that for some boards:
* missing ram_size checks are added (typically it were boards with fixed ram size)
* ram_size fixups are replaced by checks and hard errors, forcing user to
provide correct "-m" values instead of ignoring it and continuing running.
After all boards are converted, the old API is removed and memory allocation
routines are cleaned up.
The qtest-based fuzzer makes use of forking to reset-state between
tests. Keep the callback enabled, so the call_rcu thread gets created
within the child process.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200220041118.23264-15-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A program might rely on functions implemented in vl.c, but implement its
own main(). By placing main into a separate source file, there are no
complaints about duplicate main()s when linking against vl.o. For
example, the virtual-device fuzzer uses a main() provided by libfuzzer,
and needs to perform some initialization before running the softmmu
initialization. Now, main simply calls three vl.c functions which
handle the guest initialization, main loop and cleanup.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-3-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move vl.c to a separate directory, similar to linux-user/
Update the chechpatch and get_maintainer scripts, since they relied on
/vl.c for top_of_tree checks.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-2-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
