There are some conditions under which we don't actually need to do
anything for taking a reader lock: Writing the graph is only possible
from the main context while holding the BQL. So if a reader is running
in the main context under the BQL and knows that it won't be interrupted
until the next writer runs, we don't actually need to do anything.
This is the case if the reader code neither has a nested event loop
(this is forbidden anyway while you hold the lock) nor is a coroutine
(because a writer could run when the coroutine has yielded).
These conditions are exactly what bdrv_graph_rdlock_main_loop() asserts.
They are not fulfilled in bdrv_graph_co_rdlock(), which always runs in a
coroutine.
This deletes the shortcuts in bdrv_graph_co_rdlock() that skip taking
the reader lock in the main thread.
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-9-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When jobs are sleeping, for example to enforce a given rate limit, they
can be reentered early, in particular in order to get paused, to update
the rate limit or to get cancelled.
Before this patch, they behave in this case as if they had fully
completed their rate limiting delay. This means that requests are sped
up beyond their limit, violating the constraints that the user gave us.
Change the block jobs to sleep in a loop until the necessary delay is
completed, while still allowing cancelling them immediately as well
pausing (handled by the pause point in job_sleep_ns()) and updating the
rate limit.
This change is also motivated by iotests cases being prone to fail
because drain operations pause and unpause them so often that block jobs
complete earlier than they are supposed to. In particular, the next
commit would fail iotests 030 without this change.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-8-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_unref() is a no_coroutine_fn, so calling it from coroutine context
is invalid. Use bdrv_co_unref() instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-7-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we take a reader lock, we can't call any functions that take a writer
lock internally without causing deadlocks once the reader lock is
actually enforced in the main thread, too. Take the reader lock only
where it is actually needed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-6-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we take a reader lock, we can't call any functions that take a writer
lock internally without causing deadlocks once the reader lock is
actually enforced in the main thread, too. Take the reader lock only
where it is actually needed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-5-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_do_open() calls a few no_co_wrappers that wrap functions taking
the graph lock internally as a writer. Therefore, it can't hold the
reader lock across these calls, it causes deadlocks. Drop the lock
temporarily around the calls.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-4-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are some error paths in blk_exp_add() that jump to 'fail:' before
'exp' is even created. So we can't just unconditionally access exp->blk.
Add a NULL check, and switch from exp->blk to blk, which is available
earlier, just to be extra sure that we really cover all cases where
BlockDevOps could have been set for it (in practice, this only happens
in drv->create() today, so this part of the change isn't strictly
necessary).
Fixes: Coverity CID 1509238
Fixes: de79b52604
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are functions that modify the graph, so they must be able to take
a writer lock. This is impossible if they already hold the reader lock.
If they need a reader lock for some of their operations, they should
take it internally.
Many of them go through blk_*(), which will always take the lock itself.
Direct calls of bdrv_*() need to take the reader lock. Note that while
locking for bdrv_co_*() calls is checked by TSA, this is not the case
for the mixed_coroutine_fns bdrv_*(). Holding the lock is still required
when they are called from coroutine context like here!
This effectively reverts 4ec8df0183, but adds some internal locking
instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
"zlib" clusters are actually raw deflate (RFC1951) clusters without
zlib headers.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Message-Id: <168424874322.11954.1340942046351859521-0@git.sr.ht>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Let's simplify things:
First, actions generally don't need access to common BlkActionState
structure. The only exclusion are backup actions that need
block_job_txn.
Next, for transaction actions of Transaction API is more native to
allocated state structure in the action itself.
So, do the following transformation:
1. Let all actions be represented by a function with corresponding
structure as arguments.
2. Instead of array-map marshaller, let's make a function, that calls
corresponding action directly.
3. BlkActionOps and BlkActionState structures become unused
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230510150624.310640-7-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Other bitmap related actions use the .bitmap pointer in .abort action,
let's do same here:
1. It helps further refactoring, as bitmap-add is the only bitmap
action that uses state.action in .abort
2. It must be safe: transaction actions rely on the fact that on
.abort() the state is the same as at the end of .prepare(), so that
in .abort() we could precisely rollback the changes done by
.prepare().
The only way to remove the bitmap during transaction should be
block-dirty-bitmap-remove action, but it postpones actual removal to
.commit(), so we are OK on any rollback path. (Note also that
bitmap-remove is the only bitmap action that has .commit() phase,
except for simple g_free the state on .clean())
3. Again, other bitmap actions behave this way: keep the bitmap pointer
during the transaction.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230510150624.310640-6-vsementsov@yandex-team.ru>
[kwolf: Also remove the now unused BlockDirtyBitmapState.prepared]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Only backup supports GROUPED mode. Make this logic more clear. And
avoid passing extra thing to each action.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230510150624.310640-5-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510150624.310640-4-vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Look at qmp_transaction(): dev_list is not obvious name for list of
actions. Let's look at qapi spec, this argument is "actions". Let's
follow the common practice of using same argument names in qapi scheme
and code.
To be honest, rename props to properties for same reason.
Next, we have to rename global map of actions, to not conflict with new
name for function argument.
Rename also dev_entry loop variable accordingly to new name of the
list.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510150624.310640-3-vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to add more block-graph modifying transaction actions,
and block-graph modifying functions are already based on Transaction
API.
Next, we'll need to separately update permissions after several
graph-modifying actions, and this would be simple with help of
Transaction API.
So, now let's just transform what we have into new-style transaction
actions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230510150624.310640-2-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit b320e21c48,
which accidentally broke TCG, because it made the TCG -cpu max
report the presence of MTE to the guest even if the board hadn't
enabled MTE by wiring up the tag RAM. This meant that if the guest
then tried to use MTE QEMU would segfault accessing the
non-existent tag RAM:
==346473==ERROR: UndefinedBehaviorSanitizer: SEGV on unknown address (pc 0x55f328952a4a bp 0x00000213a400 sp 0x7f7871859b80 T346476)
==346473==The signal is caused by a READ memory access.
==346473==Hint: this fault was caused by a dereference of a high value address (see register values below). Disassemble the provided pc to learn which register was used.
#0 0x55f328952a4a in address_space_to_flatview /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/memory.h:1108:12
#1 0x55f328952a4a in address_space_translate /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/memory.h:2797:31
#2 0x55f328952a4a in allocation_tag_mem /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../target/arm/tcg/mte_helper.c:176:10
#3 0x55f32895366c in helper_stgm /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../target/arm/tcg/mte_helper.c:461:15
#4 0x7f782431a293 (<unknown module>)
It's also not clear that the KVM logic is correct either:
MTE defaults to on there, rather than being only on if the
board wants it on.
Revert the whole commit for now so we can sort out the issues.
(We didn't catch this in CI because we have no test cases in
avocado that use guests with MTE support.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230519145808.348701-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that the RTC is created as part of the southbridges it doesn't need
to be an out-parameter any longer.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230519084734.220480-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Just like in the real hardware (and in PIIX4), create the RTC
controllers in the south bridges.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230519084734.220480-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are new users of this functionality coming shortly so factor
it out from the GET_TIMESTAMP mailbox command handling.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230423162013.4535-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Given the increasing usage of this mailbox return code type, now
is a good time to switch to QEMU style naming.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230423162013.4535-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a CONFIG option to build the pcie-to-pci bridge. No
functional change since it's enabled per default for PCIE_PORT=y.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Message-Id: <72b6599d-6b27-00b5-aac5-2ebc16a2e023@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to PCIe Address Translation Services specification 5.1.3.,
ATS Control Register has Enable bit to enable/disable ATS. Guest may
enable/disable PCI ATS and, accordingly, Device-TLB for the VirtIO PCI
device. So, raise/lower a flag and call a trigger function to pass this
event to a device implementation.
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Message-Id: <20230512135122.70403-2-viktor@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Unlike pam_update() which takes the subject -- PAMMemoryRegion -- as
first argument, init_pam() takes it as fifth (!) argument. This makes it
quite hard to figure out what an init_pam() invocation actually
initializes. By moving the subject to the front this should become
clearer.
While at it, lower the DeviceState parameter to Object, also
communicating more clearly that this parameter is just the owner rather
than some (heavy?) dependency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213162004.2797-8-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Going through pc_memory_init() seems quite complicated for a simple
assignment.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213162004.2797-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230213162004.2797-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No need to repeat the descriptions.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230213162004.2797-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230213162004.2797-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
sysbus_add_io() just wraps memory_region_add_subregion() while also
obscuring where the memory is attached. So use
memory_region_add_subregion() directly and attach it to the existing
memory region s->mch.address_space_io which is set as an alias to
get_system_io() by the q35 machine.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230213162004.2797-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
sysbus_add_io() just wraps memory_region_add_subregion() while also
obscuring where the memory is attached. So use
memory_region_add_subregion() directly and attach it to the existing
memory region s->bus->address_space_io which is set as an alias to
get_system_io() by the pc machine.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230213162004.2797-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
1. The vIOMMU support will make vDPA can work in IOMMU mode. This
will fix security issues while using the no-IOMMU mode.
To support this feature we need to add new functions for IOMMU MR adds and
deletes.
Also since the SVQ does not support vIOMMU yet, add the check for IOMMU
in vhost_vdpa_dev_start, if the SVQ and IOMMU enable at the same time
the function will return fail.
2. Skip the iova_max check vhost_vdpa_listener_skipped_section(). While
MR is IOMMU, move this check to vhost_vdpa_iommu_map_notify()
Verified in vp_vdpa and vdpa_sim_net driver
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230510054631.2951812-5-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The unmap ioctl doesn't accept a full 64-bit span. So need to
add check for the section's size in vhost_vdpa_listener_region_del().
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230510054631.2951812-4-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In trace_vhost_vdpa_listener_region_del, the value for llend
should change to int128_get64(int128_sub(llend, int128_one()))
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230510054631.2951812-3-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To support vIOMMU in vdpa, need to exposed the function
vhost_dev_has_iommu, vdpa will use this function to check
if vIOMMU enable.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230510054631.2951812-2-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ensure op_info is not NULL in case of QCRYPTODEV_BACKEND_ALG_SYM algtype.
Fixes: 0e660a6f90 ("crypto: Introduce RSA algorithm")
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reported-by: Yiming Tao <taoym@zju.edu.cn>
Message-Id: <20230509075317.1132301-1-mcascell@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: zhenwei pi<pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The commit 93a97dc520 ("virtio-net: enable vq reset feature") enables
unconditionally vq reset feature as long as the device is emulated.
This makes impossible to actually disable the feature, and it causes
migration problems from qemu version previous than 7.2.
The entire final commit is unneeded as device system already enable or
disable the feature properly.
This reverts commit 93a97dc520.
Fixes: 93a97dc520 ("virtio-net: enable vq reset feature")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230504101447.389398-1-eperezma@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's just support 512 memslots on x86-64 and aarch64 as well. The maximum
number of ACPI slots (256) is no longer completely expressive ever since
we supported virtio-based memory devices. Further, we're completely
ignoring other memslots used outside of memory device context, such as
memslots used for boot memory.
Note that the vhost memslot limit in the kernel is usually configured to
be 509. With this change, we prepare vhost-user on the QEMU side to be
closer to that limit, to eventually support ~512 memslots in most vhost
implementations and have less "surprises" when cold/hotplugging vhost
devices while also consuming more memslots than we're currently used to
by memory devices (e.g., once virtio-mem starts using multiple memslots).
Note that most vhost-user implementations only support a small number of
memslots so far, which we can hopefully improve in the near future.
We'll leave the PPC special-case as is for now.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230503184144.808478-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allowing guests to read unplugged memory simplified the bring-up of
virtio-mem in Linux guests -- which was limited to x86-64 only. On arm64
(which was added later), we never had legacy guests and don't even allow
to configure it, essentially always having "unplugged-inaccessible=on".
At this point, all guests we care about
should be supporting VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE, so let's
change the default for the 8.1 machine.
This change implies that also memory that supports the shared zeropage
(private anonymous memory) will now require
VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE in the driver in order to be usable by
the guest -- as default, one can still manually set the
unplugged-inaccessible property.
Disallowing the guest to read unplugged memory will be important for
some future features, such as memslot optimizations or protection of
unplugged memory, whereby we'll actually no longer allow the guest to
even read from unplugged memory.
At some point, we might want to deprecate and remove that property.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <eduardo@habkost.net>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230503182352.792458-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since it's implementation on v8.0.0-rc0, having the PCI_ERR_UNCOR_MASK
set for machine types < 8.0 will cause migration to fail if the target
QEMU version is < 8.0.0 :
qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10a read: 40 device: 0 cmask: ff wmask: 0 w1cmask:0
qemu-system-x86_64: Failed to load PCIDevice:config
qemu-system-x86_64: Failed to load e1000e:parent_obj
qemu-system-x86_64: error while loading state for instance 0x0 of device '0000:00:02.0/e1000e'
qemu-system-x86_64: load of migration failed: Invalid argument
The above test migrated a 7.2 machine type from QEMU master to QEMU 7.2.0,
with this cmdline:
./qemu-system-x86_64 -M pc-q35-7.2 [-incoming XXX]
In order to fix this, property x-pcie-err-unc-mask was introduced to
control when PCI_ERR_UNCOR_MASK is enabled. This property is enabled by
default, but is disabled if machine type <= 7.2.
Fixes: 010746ae1d ("hw/pci/aer: Implement PCI_ERR_UNCOR_MASK register")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Message-Id: <20230503002701.854329-1-leobras@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1576
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Setting the VIRTIO Device Status Field to 0 resets the device. The
device's state is lost, including the vring configuration.
vhost-user.c currently sends SET_STATUS 0 before GET_VRING_BASE. This
risks confusion about the lifetime of the vhost-user state (e.g. vring
last_avail_idx) across VIRTIO device reset.
Eugenio Pérez <eperezma@redhat.com> adjusted the order for vhost-vdpa.c
in commit c3716f260b ("vdpa: move vhost reset after get vring base")
and in that commit description suggested doing the same for vhost-user
in the future.
Go ahead and adjust vhost-user.c now. I ran various online code searches
to identify vhost-user backends implementing SET_STATUS. It seems only
DPDK implements SET_STATUS and Yajun Wu <yajunw@nvidia.com> has
confirmed that it is safe to make this change.
Fixes: commit 923b8921d2 ("vhost-user: Support vhost_dev_start")
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Cindy Lu <lulu@redhat.com>
Cc: Yajun Wu <yajunw@nvidia.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230501230409.274178-1-stefanha@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230515125229.44836-3-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Fix over-80 lines and missing curly brackets for if-operators, which
are required by QEMU coding style.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230515125229.44836-2-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Currently i386 QEMU generates MADT revision 3, and reports
MADT revision 1. Set .revision to 3 to match reality.
Link: https://lore.kernel.org/linux-acpi/20230327191026.3454-1-eric.devolder@ora
cle.com/T/#t
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230517162545.2191-3-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Following the guidelines in tests/qtest/bios-tables-test.c,
set up bios-tables-test-allowed-diff.h to ignore the
imminent changes to the APIC tables, per step 2.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Message-Id: <20230517162545.2191-2-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
This commit enables each CXL Type-3 device to contain one volatile
memory region and one persistent region.
Two new properties have been added to cxl-type3 device initialization:
[volatile-memdev] and [persistent-memdev]
The existing [memdev] property has been deprecated and will default the
memory region to a persistent memory region (although a user may assign
the region to a ram or file backed region). It cannot be used in
combination with the new [persistent-memdev] property.
Partitioning volatile memory from persistent memory is not yet supported.
Volatile memory is mapped at DPA(0x0), while Persistent memory is mapped
at DPA(vmem->size), per CXL Spec 8.2.9.8.2.0 - Get Partition Info.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421160827.2227-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Accessors prefered over direct use of int128_get64() as they
clamp out of range values. None are expected here but
cleaner to always use the accessor than mix and match.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421160827.2227-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Defines are starting to exceed line length limits, align them for
cleanliness before making modifications.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421160827.2227-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The hardware clearing the commit bit is not spec compliant.
Clearing of committed bit when commit is cleared is not specifically
stated in the CXL spec, but is the expected (and simplest) permitted
behaviour so use that for QEMU emulation.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
--
v2: Picked up tags.
Message-Id: <20230421135906.3515-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not a real problem yet as all supported architectures are
little endian, but continue to tidy these up when touching
code for other reasons.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421135906.3515-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not clear what intent was here, but probably based on a misunderstanding
of what these guards are for.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421135906.3515-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
