Using umin(a, b) == a as an expansion for TCG_COND_LEU is a
better alternative to (a - INT_MIN) <= (b - INT_MIN).
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already had backend support for this feature. Expand the new
cmpsel opcode using vpblendb. The combination allows us to avoid
an extra NOT for some comparison codes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If INDEX_op_foo is always expanded by tcg_expand_vec_op, then
there may be no reasonable set of constraints to return from
tcg_target_op_def for that opcode.
Let TCG_TARGET_HAS_foo be specified as -1 in that case. Thus a
boolean test for TCG_TARGET_HAS_foo is true, but we will not
assert within process_op_defs when no constraints are specified.
Compare this with tcg_can_emit_vec_op, which already uses this
tri-state indication.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform a per-element conditional move. This combination operation is
easier to implement on some host vector units than plain cmp+bitsel.
Omit the usual gvec interface, as this is intended to be used by
target-specific gvec expansion call-backs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This operation performs d = (b & a) | (c & ~a), and is present
on a majority of host vector units. Include gvec expanders.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The paths through tcg_gen_dup_mem_vec and through MO_128 were
missing the check_size_align. The path through MO_128 was also
missing the expand_clr. This last was not visible because the
only user is ARM SVE, which would set oprsz == maxsz, and not
require the clear.
Fix by adding the check_size_align and using do_dup directly
instead of duplicating the check in tcg_gen_gvec_dup_{i32,i64}.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The VBROADCASTSD instruction only allows %ymm registers as destination.
Rather than forcing VEX.L and writing to the entire 256-bit register,
revert to using MOVDDUP with an %xmm register. This is sufficient for
an avx1 host since we do not support TCG_TYPE_V256 for that case.
Also fix the 32-bit avx2, which should have used VPBROADCASTW.
Fixes: 1e262b49b5
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove a function of the same name from target/arm/.
Use a branchless implementation of abs gleaned from gcc.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow expansion either via shift by scalar or by replicating
the scalar for shift by vector.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Use a private structure for do_gvec_shifts.
The gvec expanders perform a modulo on the shift count. If the target
requires alternate behaviour, then it cannot use the generic gvec
expanders anyway, and will have to have its own custom code.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow the backend to expand dup from memory directly, instead of
forcing the value into a temp first. This is especially important
if integer/vector register moves do not exist.
Note that officially tcg_out_dupm_vec is allowed to fail.
If it did, we could fix this up relatively easily:
VECE == 32/64:
Load the value into a vector register, then dup.
Both of these must work.
VECE == 8/16:
If the value happens to be at an offset such that an aligned
load would place the desired value in the least significant
end of the register, go ahead and load w/garbage in high bits.
Load the value w/INDEX_op_ld{8,16}_i32.
Attempt a move directly to vector reg, which may fail.
Store the value into the backing store for OTS.
Load the value into the vector reg w/TCG_TYPE_I32, which must work.
Duplicate from the vector reg into itself, which must work.
All of which is well and good, except that all supported
hosts can support dupm for all vece, so all of the failure
paths would be dead code and untestable.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The LD1R instruction does all the work. Note that the only
useful addressing mode is a base register with no offset.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This case is similar to INDEX_op_mov_* in that we need to do
different things depending on the current location of the source.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Added some commentary to the tcg_reg_alloc_* functions.
The i386 backend already has these functions, and the aarch64 backend
could easily split out one. Nothing is done with these functions yet,
but this will aid register allocation of INDEX_op_dup_vec in a later patch.
Adjust the aarch64 tcg_out_dupi_vec signature to match the new interface.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PowerPC Altivec does not support direct moves between vector registers
and general registers. So when tcg_out_mov fails, we can use the
backing memory for the temporary to perform the move.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch merely changes the interface, aborting on all failures,
of which there are currently none.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have a function that takes an additional condition parameter
over the standard backend interface. It already takes care of
eliding no-op moves.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only fixed_reg is cpu_env, and it should not be modified
during any TB. Therefore code that tries to special-case moves
into a fixed_reg is dead. Remove it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the single opcode in .opc with a null-terminated
array in .opt_opc. We still require that all opcodes be
used with the same .vece.
Validate the contents of this list with CONFIG_DEBUG_TCG.
All tcg_gen_*_vec functions will check any list active
during .fniv expansion. Swap the active list in and out
as we expand other opcodes, or take control away from the
front-end function.
Convert all existing vector aware front ends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PowerPC Altivec does not support add and subtract of 64-bit elements.
Prepare for that configuration by not assuming the operation is
universally supported.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_can_emit_vec_op instead of just TCG_TARGET_HAS_neg_vec,
so that we check the type and vece for the actual operation.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let's add tcg_gen_gvec_3i(), similar to tcg_gen_gvec_2i(), however
without introducing "gen_helper_gvec_3i *fnoi", as it isn't needed
for now.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190416185301.25344-2-david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will not necessarily restrict the size of the TB, since for v7
the majority of constant pool usage is for calls from the out-of-line
ldst code, which is already at the end of the TB. But this does
allow us to save one insn per reference on the off-chance.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no point in coding for a 2GB offset when the max TB size
is already limited to 64k. If we further restrict to 32k then we
can eliminate the extra ADDIS instruction.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If the TB generates too much code, such that backend relocations
overflow, try again with a smaller TB. In support of this, move
relocation processing from a random place within tcg_out_op, in
the handling of branch opcodes, to a new function at the end of
tcg_gen_code.
This is not a complete solution, as there are additional relocs
generated for out-of-line ldst handling and constant pools.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If a TB generates too much code, try again with fewer insns.
Fixes: https://bugs.launchpad.net/bugs/1824853
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will let backends implement the double-word shift operation.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Will be helpful for s390x. Input 128 bit and output 64 bit only,
which is sufficient for now.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190225154204.26751-1-david@redhat.com>
[rth: Add matching tcg_gen_extract2_i32.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
dump_exec_info() takes an fprintf()-like callback and a FILE * to pass
to it.
Its only caller hmp_info_jit() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-5-armbru@redhat.com>
dump_opcount_info() takes an fprintf()-like callback and a FILE * to
pass to it.
Its only caller hmp_info_opcount() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-4-armbru@redhat.com>
The last update to this file was 9 years ago. In the meantime,
4 of the 6 ideas have actually been completed. The lat two do
not actually make sense anymore.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
