I interpreted CONFIG_VHOST_USER as controlling only QEMU's vhost-user
device frontends. However, virtiofsd and contrib/ vhost-user device
backends are also controlled by CONFIG_VHOST_USER. Make the
vhost-user-blk server depend on CONFIG_VHOST_USER for consistency.
Now the following error is printed when the vhost-user-blk server is
enabled without CONFIG_VHOST_USER:
$ ./configure --disable-vhost-user --enable-vhost-user-blk ...
../meson.build:761:8: ERROR: Problem encountered: vhost_user_blk_server requires vhost-user support
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201110171121.1265142-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The --enable/disable-vhost-user-blk-server options were implemented in
./configure. There has been confusion about them and part of the problem
is that the shell syntax used for setting the default value is not easy
to read. Move the option over to meson where the conditions are easier
to understand:
have_vhost_user_blk_server = (targetos == 'linux')
if get_option('vhost_user_blk_server').enabled()
if targetos != 'linux'
error('vhost_user_blk_server requires linux')
endif
elif get_option('vhost_user_blk_server').disabled() or not have_system
have_vhost_user_blk_server = false
endif
This patch does not change behavior.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201110171121.1265142-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
QEMU currently truncates the mmap_offset field when sending
VHOST_USER_ADD_MEM_REG and VHOST_USER_REM_MEM_REG messages. The struct
layout looks like this:
typedef struct VhostUserMemoryRegion {
uint64_t guest_phys_addr;
uint64_t memory_size;
uint64_t userspace_addr;
uint64_t mmap_offset;
} VhostUserMemoryRegion;
typedef struct VhostUserMemRegMsg {
uint32_t padding;
/* WARNING: there is a 32-bit hole here! */
VhostUserMemoryRegion region;
} VhostUserMemRegMsg;
The payload size is calculated as follows when sending the message in
hw/virtio/vhost-user.c:
msg->hdr.size = sizeof(msg->payload.mem_reg.padding) +
sizeof(VhostUserMemoryRegion);
This calculation produces an incorrect result of only 36 bytes.
sizeof(VhostUserMemRegMsg) is actually 40 bytes.
The consequence of this is that the final field, mmap_offset, is
truncated. This breaks x86_64 TCG guests on s390 hosts. Other guest/host
combinations may get lucky if either of the following holds:
1. The guest memory layout does not need mmap_offset != 0.
2. The host is little-endian and mmap_offset <= 0xffffffff so the
truncation has no effect.
Fix this by extending the existing 32-bit padding field to 64-bit. Now
the padding reflects the actual compiler padding. This can be verified
using pahole(1).
Also document the layout properly in the vhost-user specification. The
vhost-user spec did not document the exact layout. It would be
impossible to implement the spec without looking at the QEMU source
code.
Existing vhost-user frontends and device backends continue to work after
this fix has been applied. The only change in the wire protocol is that
QEMU now sets hdr.size to 40 instead of 36. If a vhost-user
implementation has a hardcoded size check for 36 bytes, then it will
fail with new QEMUs. Both QEMU and DPDK/SPDK don't check the exact
payload size, so they continue to work.
Fixes: f1aeb14b08 ("Transmit vhost-user memory regions individually")
Cc: Raphael Norwitz <raphael.norwitz@nutanix.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201109174355.1069147-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: f1aeb14b08 ("Transmit vhost-user memory regions individually")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
* Oss-fuzz updates
* Publish the docs built during gitlab CI to the user's gitlab.io page
* Update the OpenBSD VM test to v6.8
* Fix the device-crash-test script to run with the meson build system
* Some small s390x fixes
-----BEGIN PGP SIGNATURE-----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=a3YE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-11-10' into staging
* Some small qtest fixes
* Oss-fuzz updates
* Publish the docs built during gitlab CI to the user's gitlab.io page
* Update the OpenBSD VM test to v6.8
* Fix the device-crash-test script to run with the meson build system
* Some small s390x fixes
# gpg: Signature made Tue 10 Nov 2020 11:05:06 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-11-10:
s390x: Avoid variable size warning in ipl.h
s390x: fix clang 11 warnings in cpu_models.c
qtest: Update references to parse_escape() in comments
fuzz: add virtio-blk fuzz target
docs: add "page source" link to sphinx documentation
gitlab: force enable docs build in Fedora, Ubuntu, Debian
gitlab: publish the docs built during CI
configure: surface deprecated targets in the help output
fuzz: Make fork_fuzz.ld compatible with LLVM's LLD
scripts/oss-fuzz: give all fuzzers -target names
docs/fuzz: update fuzzing documentation post-meson
docs/fuzz: rST-ify the fuzzing documentation
MAINTAINERS: Add gitlab-pipeline-status script to GitLab CI section
gitlab-ci: Drop generic cache rule
tests/qtest/tpm: Remove redundant check in the tpm_test_swtpm_test()
qtest: Fix bad printf format specifiers
device-crash-test: Check if path is actually an executable file
tests/vm: update openbsd to release 6.8
meson: always include contrib/libvhost-user
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Checks for UNDEF cases should go before the "is VFP enabled?" access
check, except in special cases. Move a stray UNDEF check in the VTBL
trans function up above the access check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201109145324.2859-1-peter.maydell@linaro.org
The number of runs is equal to the number of 0-1 and 1-0 transitions,
plus one. Currently, it's counting the number of times these transitions
do _not_ happen, plus one.
Source:
https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-22r1a.pdf
section 2.3.4 point (3).
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20201103011457.2959989-2-hskinnemoen@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The nseries machines have a codepath that allows them to load a
secondary bootloader. This code wasn't checking that the
load_image_targphys() succeeded. Check the return value and report
the error to the user.
While we're in the vicinity, fix the comment style of the
comment documenting what this image load is doing.
Fixes: Coverity CID 1192904
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201103114918.11807-1-peter.maydell@linaro.org
We don't need to fill the full pic[] array if we only use
few of the interrupt lines. Directly call qdev_get_gpio_in()
when necessary.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201107193403.436146-6-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The MusicPal board code connects both of the IRQ outputs of the UART
to the same INTC qemu_irq. Connecting two qemu_irqs outputs directly
to the same input is not valid as it produces subtly wrong behaviour
(for instance if both the IRQ lines are high, and then one goes
low, the INTC input will see this as a high-to-low transition
even though the second IRQ line should still be holding it high).
This kind of wiring needs an explicitly created OR gate; add one.
Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201107193403.436146-5-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
omap2420_mpu_init() introduced in commit 827df9f3c5 ("Add basic
OMAP2 chip support") takes care of creating the 3 UARTs.
Then commit 58a26b477e ("Emulate a serial bluetooth HCI with H4+
extensions and attach to n8x0's UART") added n8x0_uart_setup()
which create the UART and connects it to an IRQ output,
overwritting the existing peripheral and its IRQ connection.
This is incorrect.
Fortunately we don't need to fix this, because commit 6da68df7f9
("hw/arm/nseries: Replace the bluetooth chardev with a "null"
chardev") removed the use of this peripheral. We can simply
remove the code.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201107193403.436146-4-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The system configuration controller (SYSCFG) doesn't have
any output IRQ (and the INTC input #71 belongs to the UART6).
Remove the invalid code.
Fixes: db635521a0 ("stm32f205: Add the stm32f205 SoC")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201107193403.436146-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can use one MPC per SRAM bank, but we currently only wire the
IRQ from the first expansion MPC to the IRQ splitter. Fix that.
Fixes: bb75e16d5e ("hw/arm/iotkit: Wire up MPC interrupt lines")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201107193403.436146-2-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The helper function did not get updated when we reorganized
the vector register file for SVE. Since then, the neon dregs
are non-sequential and cannot be simply indexed.
At the same time, make the helper function operate on 64-bit
quantities so that we do not have to call it twice.
Fixes: c39c2b9043
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: use aa32_vfp_dreg() rather than opencoding]
Message-id: 20201105171126.88014-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When using a Cortex-A15, the Virt machine does not use any
MPCore peripherals. Remove the dependency.
Fixes: 7951c7b7c0 ("hw/arm: Express dependencies of the virt machine with Kconfig")
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201107114852.271922-1-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We should at least document what this machine is about.
Reviewed-by: Graeme Gregory <graeme@nuviainc.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20201104165254.24822-1-alex.bennee@linaro.org
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Shashi Mallela <shashi.mallela@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[PMM: fixed filename mismatch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix code style. Space required before the open parenthesis '('.
Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com>
Signed-off-by: Kai Deng <dengkai1@huawei.com>
Message-id: 20201103114529.638233-3-zhangxinhao1@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix code style. Don't use '#' flag of printf format ('%#') in
format strings, use '0x' prefix instead
Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com>
Signed-off-by: Kai Deng <dengkai1@huawei.com>
Message-id: 20201103114529.638233-2-zhangxinhao1@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 5FA280F5.8060902@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
commit 32bd322a01 ("hw/timer/armv7m_systick: Rewrite to use ptimers")
changed armv7m_systick to build on ptimers. Make sure we have ptimers
in the build when building armv7m_systick.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201104103343.30392-1-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ibex PLIC, the other fixes the Hypvervisor access functions.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl+qDs0ACgkQIeENKd+X
cFR/OwgAra3yNXMLZKHSsQt/fGeymv5gfWCbS3T4ncOLUcaC3IXEaf7udmWVhC4S
g9g6OhbO2jofRvSn0t0hZHAAnbTizKwesRXMQFfqAERn66Aa+yHmZYjsJrRHlwMf
MC3XBO5kgDISwvq7/CEI/RO8el2lEScuH9Mdc7cgDnoPpdX1Vy9Hl5RaDdqCHQck
XcqSnpjRkVQ8pKK6OhvDfD/Al5olKoHFR8k3gy+TrSpVsGDubGljOKUY/m7Ihs0m
ZVZMGbn+BISiFnqtoqb9O29ZxMPZv3tolmRPbT7d+4RqgK2cQ3WS63jXejii21ew
KCWv8CSWyGjMo5td+d6V6QXkPNifpg==
=75u0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20201109' into staging
This fixes two bugs in the RISC-V port. One is a bug in the
Ibex PLIC, the other fixes the Hypvervisor access functions.
# gpg: Signature made Tue 10 Nov 2020 03:53:49 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20201109:
hw/intc/ibex_plic: Clear the claim register when read
target/riscv: Split the Hypervisor execute load helpers
target/riscv: Remove the hyp load and store functions
target/riscv: Remove the HS_TWO_STAGE flag
target/riscv: Set the virtualised MMU mode when doing hyp accesses
target/riscv: Add a virtualised MMU Mode
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
S390IPLState contains two IplParameterBlock, which may in turn have
either a IPLBlockPV or a IplBlockFcp, both ending with a variable
sized field (an array).
This causes a warning with clang 11 or greater, which checks that
variable sized type are only allocated at the end of the struct:
In file included from ../qemu-cfi-v3/target/s390x/diag.c:21:
../qemu-cfi-v3/hw/s390x/ipl.h:161:23: error: field 'iplb' with variable sized type 'IplParameterBlock' (aka 'union IplParameterBlock') not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
IplParameterBlock iplb;
^
../qemu-cfi-v3/hw/s390x/ipl.h:162:23: error: field 'iplb_pv' with variable sized type 'IplParameterBlock' (aka 'union IplParameterBlock') not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
IplParameterBlock iplb_pv;
In this case, however, the warning is a false positive, because
IPLBlockPV and IplBlockFcp are allocated in a union wrapped at 4K,
making the union non-variable sized.
Fix the warning by turning the two variable sized arrays into arrays
of size 0. This avoids the compiler error and should produce the
same code.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201105221905.1350-5-dbuono@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There are void * pointers that get casted to enums, in cpu_models.c
Such casts can result in a small integer type and are caught as
warnings with clang, starting with version 11:
Clang 11 finds a bunch of spots in the code that trigger this new warnings:
../qemu-base/target/s390x/cpu_models.c:985:21: error: cast to smaller integer type 'S390Feat' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
S390Feat feat = (S390Feat) opaque;
^~~~~~~~~~~~~~~~~
../qemu-base/target/s390x/cpu_models.c:1002:21: error: cast to smaller integer type 'S390Feat' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
S390Feat feat = (S390Feat) opaque;
^~~~~~~~~~~~~~~~~
../qemu-base/target/s390x/cpu_models.c:1036:27: error: cast to smaller integer type 'S390FeatGroup' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
S390FeatGroup group = (S390FeatGroup) opaque;
^~~~~~~~~~~~~~~~~~~~~~
../qemu-base/target/s390x/cpu_models.c:1057:27: error: cast to smaller integer type 'S390FeatGroup' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
S390FeatGroup group = (S390FeatGroup) opaque;
^~~~~~~~~~~~~~~~~~~~~~
4 errors generated.
Avoid this warning by casting the pointer to uintptr_t first.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201105221905.1350-3-dbuono@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In commit 61030280ca in 2018 we renamed the parse_escape()
function to parse_interpolation(), but we didn't catch the references
to this function in doc comments in libqtest.h. Update them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201109162621.18885-1-peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The virtio-blk fuzz target sets up and fuzzes the available virtio-blk
queues. The implementation is based on two files:
- tests/qtest/fuzz/virtio_scsi_fuzz.c
- tests/qtest/virtio_blk_test.c
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <e2405c459302ecaee2555405604975353bfa3837.1604920905.git.dimastep@yandex-team.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a link to the top of the sidebar in every docs page that takes the
user back to the source code in gitlab.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20201102130926.161183-5-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Meson runs a test to see if Sphinx works, and automatically disables it
on error. This can lead to the CI jobs skipping docs build without
maintainers noticing the problem. Use --enable-docs to force a fatal
error if Sphinx doesn't work on the jobs where we expect it to be OK.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20201102130926.161183-3-berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Most of the build jobs will create the sphinx documentation. If we
expose this as an artifact of a "pages" job in a "public" directory, it
will get published using GitLab Pages. This means a user can push a
branch with docs changes to GitLab and view the results at
https://yourusername.gitlab.io/qemu/
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20201102130926.161183-2-berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Show the targets but keep them separate from the main list.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201029201449.6926-1-alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
LLVM's linker, LLD, supports the keyword "INSERT AFTER", starting with
version 11.
However, when multiple sections are defined in the same "INSERT AFTER",
they are added in a reversed order, compared to BFD's LD.
This patch makes fork_fuzz.ld generic enough to work with both linkers.
Each section now has its own "INSERT AFTER" keyword, so proper ordering is
defined between the sections added.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201105221905.1350-2-dbuono@linux.vnet.ibm.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We switched to hardlinks in
a942f64cc4 ("scripts/oss-fuzz: use hardlinks instead of copying")
The motivation was to conserve space (50 fuzzers built with ASAN, can
weigh close to 9 GB).
Unfortunately, OSS-Fuzz (partially) treated the underlying copy of the
fuzzer as a standalone fuzzer. To attempt to fix, we tried:
f8b8f37463 ("scripts/oss-fuzz: rename bin/qemu-fuzz-i386")
This was also not a complete fix, because though OSS-Fuzz
ignores the renamed fuzzer, the underlying ClusterFuzz, doesn't:
https://storage.googleapis.com/clusterfuzz-builds/qemu/targets.list.addresshttps://oss-fuzz-build-logs.storage.googleapis.com/log-9bfb55f9-1c20-4aa6-a49c-ede12864eeb2.txt
(clusterfuzz still lists qemu-fuzz-i386.base as a fuzzer)
This change keeps the hard-links, but makes them all point to a file
with a qemu-fuzz-i386-target-.. name. If we have targets, A, B, C, the
result will be:
qemu-fuzz-i386-target-A (base file)
qemu-fuzz-i386-target-B -> qemu-fuzz-i386-target-A
qemu-fuzz-i386-target-C -> qemu-fuzz-i386-target-A
The result should be that every file that looks like a fuzzer to
OSS-Fuzz/ClusterFuzz, can run as a fuzzer (we don't have a separate base
copy). Unfortunately, there is not simple way to test this locally.
In the future, it might be worth it to link the majority of QEMU in as a
shared-object (see https://github.com/google/oss-fuzz/issues/4575 )
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201108171136.160607-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Do not let the gitlab-pipeline-status script unmaintained,
add it to the 'GitLab Continuous Integration' section.
Fixes: c02b2eac55 ("GitLab Gating CI: introduce pipeline-status contrib script")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201108204535.2319870-5-philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The function do_sigreturn() tries to store the PC, NPC and PSR in
uint32_t local variables, which implicitly drops the high half of
these fields for 64-bit guests.
The usual effect was that a guest which used signals would crash on
return from a signal unless it was lucky enough to take it while the
PC was in the low 4GB of the address space. In particular, Debian
/bin/dash and /bin/bash would segfault after executing external
commands.
Use abi_ulong, which is the type these fields all have in the
__siginfo_t struct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201105212314.9628-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Because QEMU's user-mode emulation just directly accesses guest CPU
state, for SPARC the guest register window state is not the same in
the sparc64_get_context() and sparc64_set_context() functions as it
is for the real kernel's versions of those functions. Specifically,
for the kernel it has saved the user space state such that the O*
registers go into a pt_regs struct as UREG_I*, and the I* registers
have been spilled onto the userspace stack. For QEMU, we haven't
done that, so the guest's O* registers are still in WREG_O* and the
I* registers in WREG_I*.
The code was already accessing the O* registers correctly for QEMU,
but had copied the kernel code for accessing the I* registers off the
userspace stack. Replace this with direct accesses to fp and i7 in
the CPU state, and add a comment explaining why we differ from the
kernel code here.
This fix is sufficient to get bash to a shell prompt.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201105212314.9628-3-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The various structs that make up the SPARC target_ucontext had some
errors:
* target structures must not include fields which are host pointers,
which might be the wrong size. These should be abi_ulong instead
* because we don't have the 'long double' part of the mcfpu_fregs
union in our version of the target_mc_fpu struct, we need to
manually force it to be 16-aligned
In particular, the lack of 16-alignment caused sparc64_get_context()
and sparc64_set_context() to read and write all the registers at the
wrong offset, which triggered a guest glibc stack check in
siglongjmp:
*** longjmp causes uninitialized stack frame ***: terminated
when trying to run bash.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201105212314.9628-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
After claiming the interrupt by reading the claim register we want to
clear the register to make sure the interrupt doesn't appear at the next
read.
This matches the documentation for the claim register as when an interrupt
is claimed by a target the relevant bit of IP is cleared (which we already
do): https://docs.opentitan.org/hw/ip/rv_plic/doc/index.html
This also matches the current hardware.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 68d4575deef2559b7a747f3bda193fcf43af4558.1604629928.git.alistair.francis@wdc.com
Split the hypervisor execute load functions into two seperate functions.
This avoids us having to pass the memop to the C helper functions.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 5b1550f0faa3c435cc77f3c1ae811dea98ab9e36.1604464950.git.alistair.francis@wdc.com
Remove the special Virtulisation load and store functions and just use
the standard tcg tcg_gen_qemu_ld_tl() and tcg_gen_qemu_st_tl() functions
instead.
As part of this change we ensure we still run an access check to make
sure we can perform the operations.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 189ac3e53ef2854824d18aad7074c6649f17de2c.1604464950.git.alistair.francis@wdc.com
The HS_TWO_STAGE flag is no longer required as the MMU index contains
the information if we are performing a two stage access.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: f514b128b1ff0fb41c85f914cee18f905007a922.1604464950.git.alistair.francis@wdc.com
When performing the hypervisor load/store operations set the MMU mode to
indicate that we are virtualised.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: e411c61a1452cad16853f13cac2fb86dc91ebee8.1604464950.git.alistair.francis@wdc.com
We opendir("/sys/block") at the beginning of the function, but we never
close it prior to returning.
Fixes: Coverity CID 1436130
Fixes: fed3956429 ("qga: add implementation of guest-get-disks for Linux")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
- Some nvme fixes (addressing problems spotted by Coverity)
- Fix nfs compiling on mingw (and enable it in Cirrus)
- Fix an error path in bdrv_co_invalidate_cache() (permission update
was initiated, but not aborted)
- Fix (on-error) roll back in bdrv_drop_intermediate(): Instead of
inlining bdrv_replace_node() (wrongly), call that function
- Fix for iotest 240
- Fix error handling in bdrv_getlength()
- Be more explicit about how QCowL2Meta objects are handled
- Cleanups
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl+pgCISHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9An3UIAJgnlgRopgBfaOxwp08fJxOzIllVsqIo
QLrVxopFhufCL2mOUlP/UNAM/5Lwrti+vt6gWvAP0CqmIXyqnrQCCH1r2VxY5i+X
qUDbj/3slscVCkGi24W9nfu6waV6dQLpXzKEvNjHaEhTp4H+Kje/TftczzVM7/mQ
l8raTkzyxC27pHw0vLBCjOl1MoMqSYNxMpqHa+lCHqGIiBG+NthbnXFqdITmSspw
0vAP1rdmp5pGXThI4Lv7cBkVbjWZSTKi858JzGHR9Uv1PHaU/cVRmhhAyR3gB8VX
3QHOilEaH+maYwOuhISBRVit75j+lk4E4KZZXSupw+i9D4ttdSluz2o=
=LV7z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-11-09-v2' into staging
Block patches for 5.2.0-rc1:
- Some nvme fixes (addressing problems spotted by Coverity)
- Fix nfs compiling on mingw (and enable it in Cirrus)
- Fix an error path in bdrv_co_invalidate_cache() (permission update
was initiated, but not aborted)
- Fix (on-error) roll back in bdrv_drop_intermediate(): Instead of
inlining bdrv_replace_node() (wrongly), call that function
- Fix for iotest 240
- Fix error handling in bdrv_getlength()
- Be more explicit about how QCowL2Meta objects are handled
- Cleanups
# gpg: Signature made Mon 09 Nov 2020 17:45:06 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-11-09-v2:
block: make bdrv_drop_intermediate() less wrong
block: add bdrv_replace_node_common()
block: add forgotten bdrv_abort_perm_update() to bdrv_co_invalidate_cache()
block: Fix some code style problems, "foo* bar" should be "foo *bar"
block: Fix integer promotion error in bdrv_getlength()
block: enable libnfs on msys2/mingw in cirrus.yml
block: Fixes nfs compiling error on msys2/mingw
iotests: rewrite iotest 240 in python
iotests: add filter_qmp_virtio_scsi function
hw/block/nvme: fix free of array-typed value
hw/block/nvme: fix uint16_t use of uint32_t sgls member
hw/block/nvme: fix null ns in register namespace
qcow2: Document and enforce the QCowL2Meta invariants
block: Move bdrv_drain_all_end_quiesce() to block_int.h
block: Remove unused include
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
First, permission update loop tries to do iterations transactionally,
but the whole update is not transactional: nobody roll-back successful
loop iterations when some iteration fails.
Second, in the iteration we have nested permission update:
c->klass->update_filename may point to bdrv_child_cb_update_filename()
which calls bdrv_backing_update_filename(), which may do node reopen to
RW.
Permission update system is not prepared to nested updates, at least it
has intermediate permission-update state stored in BdrvChild
structures: has_backup_perm, backup_perm and backup_shared_perm.
So, let's first do bdrv_replace_node_common() (which is more
transactional than open-coded update in bdrv_drop_intermediate()) and
then call update_filename() in separate. We still do not rollback
changes in case of update_filename() failure but it's not much worse
than pre-patch behavior.
Note that bdrv_replace_node_common() does check for frozen children,
so corresponding check is dropped in bdrv_drop_intermediate().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201106124241.16950-4-vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
