The block layer read and write functions do not like requests which are
bigger than INT_MAX bytes. Since the VDI bmap is read and written in a
single operation, its size is therefore limited accordingly. This
reduces the maximum VDI image size supported by QEMU to half of what it
currently is (down to approximately 512 TB).
The VDI test 084 has to be adapted accordingly. Actually, one could
clearly see that it was broken from the "Could not open
'TEST_DIR/t.IMGFMT': Invalid argument" line for an image which was
supposed to work just fine.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Several events were missing from the QAPI enum, add them.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test the error message when a COW file is about to be created which is
supposed to inherit the size of its backing file, while the backing file
given does not actually exist.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the specified backing file could not be opened, do not generate a new
error message which contains the message which has been generated by
bdrv_open(), but just propagate the latter.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
img_open() already prints an error if the operation failed, so there
should not be another error_report() afterwards.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After commit 89b516d8, some logics is turbid and
breaks 'make check' as below errors:
tests/vhost-user-test.c: In function '_cond_wait_until':
tests/vhost-user-test.c:154: error: 'G_TIME_SPAN_SECOND' undeclared (first use in this function)
tests/vhost-user-test.c:154: error: (Each undeclared identifier is reported only once
tests/vhost-user-test.c:154: error: for each function it appears in.)
tests/vhost-user-test.c: In function 'read_guest_mem':
tests/vhost-user-test.c:192: warning: implicit declaration of function 'g_get_monotonic_time'
tests/vhost-user-test.c:192: warning: nested extern declaration of 'g_get_monotonic_time'
tests/vhost-user-test.c:192: error: 'G_TIME_SPAN_SECOND' undeclared (first use in this function)
make: *** [tests/vhost-user-test.o] Error 1
First, vhost-usr-test.c rely on glib-compat.h because
of using G_TIME_SPAN_SECOND [glib < 2.26] and g_get_monotonic_time(),
but vhost-usr-test.c defined QEMU_GLIB_COMPAT_H, which make
glib-compat.h will not be included.
Second, if we remove QEMU_GLIB_COMPAT_H definability in
vhost-usr-test.c, then we will get below warnings:
tests/vhost-user-test.c: In function 'read_guest_mem':
tests/vhost-user-test.c:190: warning: passing argument 1 of 'g_mutex_lock' from incompatible pointer type
tests/vhost-user-test.c:234: warning: passing argument 1 of 'g_mutex_unlock' from incompatible pointer type
That's because glib-compat.h redefine the g_mutex_lock/unlock
function. Those functions' arguments is CompatGMutex/CompatGCond,
but vhost-user-test.c is using GMutex/GCond, which cause the type
is not consistent.
We can rerealize those functions of vhost-user-test.c,
which need a lots of patches. Let's simply address it, and
leave this file alone.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 1415149259-6188-1-git-send-email-arei.gonglei@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SAM instructions simply change 2 bits in PSW.MASK to advertise
the current memory mode. While we can't fully guarantee that 31 bit
mode (or even remotely 24 bit mode) actually work correctly, we don't
check whether lpswe modifies these bits, so we shouldn't keep the
guest from executing SAM instructions either.
This patch implements all SAM instrutions with their actual PSW changing
semantics, making more recent Linux kernels boot properly which do issue
a SAM31 call during early boot.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
When injecting an sclp console interrupt into the guest, we increase
the PC by 4 for some reason. I have no idea why I put that code there,
but it's clearly wrong. Remove the increment.
This patch fixes sclp serial input for the ccw machine.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Fun things for 2.2:
- e500 virt machine: power off support (needs 3.19 guests)
- e500 virt machine: -device eTSEC support
- new framework to allow dynamic spawning of sysbus devices
- spapr: enable migration of nvram
- new 440x5wDFPU cpu type
- Altivec and other random fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQIcBAABAgAGBQJUWVKfAAoJECszeR4D/txguC8QAIjVzZztg83ubBC8Wtb2BwIO
pnyiFBtWCGpziOvUILFNQyX1DuxNMUciyzM3RheN6HyW6Z8ON1dVxqGvt2efkoEW
2JEwTDM9jWpbvinWX/oomGSqnazj3p6T+Yd1+6vpUnq7aax0tDvgPxQZZp5xVDBk
dHT+X/EbIg1zERK+pKng+f3i9FQSpQR3pnQMCBg3namJaNll+EVwT5r0IdqKfRb2
OTXgdCUMkT3B1SmWAJDJZeZKpoj+o1e3Y4e3LAY9cha4ixlpMb2RCNd36O9wENf/
uZX8UeDdb56JpQy4Eyqk/eaYRpmyaA5XVQJRRrpF+iIWGMi290YQWQvfVKLyEAXl
z7dstSQiJ38ZwAVEGASD4X/THvEr9XE03EKzxFLEH0sD7DN4YjMQuPm/BrHTywhB
HKPlUu1nvHIbPA+yUePD6pUN2gBGMpYRSJpJkhUQwU9erdlyTx/Jhgg6+KUgl74D
1ub+Xd+/RLwAccvHISq5Sm5fbVi9Ti+SEAmHoYFV44YxspGlABq4FovXfXmpgvpj
lC9nO49ZiPGWRD6J3JphQoH0YCoCW/ld7uQjkN4rhRxBNLAIeTGgPq6ikarC3JJl
Yg4gPkGqtOr4nJ0XNSdsY5iEPjCoG3p8bYiIrrNMBlTOniDwr9vIo9H3s0nA1QN8
JtFbYPqsSOI2ukazdlzq
=X+W0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2014-11-04
Fun things for 2.2:
- e500 virt machine: power off support (needs 3.19 guests)
- e500 virt machine: -device eTSEC support
- new framework to allow dynamic spawning of sysbus devices
- spapr: enable migration of nvram
- new 440x5wDFPU cpu type
- Altivec and other random fixes
# gpg: Signature made Tue 04 Nov 2014 22:26:39 GMT using RSA key ID 03FEDC60
# gpg: Good signature from "Alexander Graf <agraf@suse.de>"
# gpg: aka "Alexander Graf <alex@csgraf.de>"
* remotes/agraf/tags/signed-ppc-for-upstream: (34 commits)
spapr: Allow dynamic creation of PHB
target-ppc: Fix Altivec Round Opcodes
target-ppc: Fix vcmpbfp. Unordered Case
target-ppc: Fix Altivec Shifts
target-ppc: simplify AES emulation
e500: Add support for eTSEC in device tree
PPC: e500: Support dynamically spawned sysbus devices
sysbus: Add new platform bus helper device
sysbus: Expose MMIO enumeration helper
sysbus: Expose IRQ enumeration helpers
sysbus: Make devices spawnable via -device
sysbus: Add dynamic sysbus device search
hw/ppc/spapr_pci.c: Avoid functions not in glib 2.12 (g_hash_table_iter_*)
ppc: do not look at the MMU index to detect PR/HV mode
target-ppc: kvm: Fix memory overflow issue about strncat()
spapr_nvram: Enable migration
PPC: E500: Hook up power off GPIO to GPIO controller
PPC: E500: Instantiate MPC8XXX gpio controller on virt machine
PPC: Add MPC8XXX gpio controller
target-ppc: Fix an invalid free in opcode table handling code.
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we finally check for presence of dangling sysbus devices, make check
started complaining that the sPAPR PHB is one such device.
However, it really isn't. The spapr PHB is not really a traditional sysbus
device, but much more a special spapr pv device which is already able to get
created dynamically.
Move spapr to its own dynamic sysbus check handling and allow PHB devices to
get allocated dynamically.
Signed-off-by: Alexander Graf <agraf@suse.de>
Correct the opcodes for the vrfim, vrfin and vrfiz instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix the implementation of Vector Compare Bounds Single Precision.
Specifically, fix the case where the operands are unordered -- since
the result is non-zero, the CR[6] field should be set to zero.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix the implementation of the Altivec shift left and shift right
instructions (vsl, vsr) which erroneously inverts shift direction
on big endian hosts.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch simplifies the AES code, by directly accessing the newly added
S-Box, InvS-Box tables instead of recreating them by using the AES_Te and
AES_Td tables.
Cc: Alexander Graf <agraf@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds support to expose eTSEC devices in the dynamically created
guest facing device tree. This allows us to expose eTSEC devices into guests
without changes in the machine file.
Because we can now tell the guest about eTSEC devices this patch allows the
user to specify eTSEC devices via -device at all.
Signed-off-by: Alexander Graf <agraf@suse.de>
For e500 our approach to supporting dynamically spawned sysbus devices is to
create a simple bus from the guest's point of view within which we map those
devices dynamically.
We allocate memory regions always within the "platform" hole in address
space and map IRQs to predetermined IRQ lines that are reserved for platform
device usage.
This maps really nicely into device tree logic, so we can just tell the
guest about our virtual simple bus in device tree as well.
Signed-off-by: Alexander Graf <agraf@suse.de>
We need to support spawning of sysbus devices dynamically via the command line.
The easiest way to represent these dynamically spawned devices in the guest's
memory and IRQ layout is by preallocating some space for dynamic sysbus devices.
This is what the "platform bus" device does. It is a sysbus device that exports
a configurably sized MMIO region and a configurable number of IRQ lines. When
this device encounters sysbus devices that have been dynamically created and not
manually wired up, it dynamically connects them to its own pool of resources.
The machine model can then loop through all of these devices and create a guest
configuration (device tree) to make them visible to the guest.
Signed-off-by: Alexander Graf <agraf@suse.de>
Sysbus devices have a range of MMIO regions they expose. The exact number
of regions is device specific and internal information to the device model.
Expose whether a region exists via a public interface. That way our platform
bus enumeration code can dynamically determine how many regions exist.
Signed-off-by: Alexander Graf <agraf@suse.de>
Sysbus devices can get their IRQ lines connected to other devices. It is
possible to figure out which IRQ line a connection is on and whether a sysbus
device even provides an IRQ connector at a specific offset.
This patch exposes helpers to make this information publicly accessible. We
will need it for the platform bus dynamic sysbus enumeration.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we can properly map sysbus devices that haven't been connected to
something forcefully by C code, we can allow the -device command line option
to spawn them.
For machines that don't implement dynamic sysbus assignment in their board
files we add a new bool "has_dynamic_sysbus" to the machine class.
When that property is false (default), we bail out when we see dynamically
spawned sysbus devices, like we did before.
Signed-off-by: Alexander Graf <agraf@suse.de>
Sysbus devices can be spawned by C code or dynamically via the command line.
In the latter case, we need to be able to find the dynamically created devices
to do things with them.
This patch adds a search helper that makes it easy to look for dynamically
spawned sysbus devices.
Signed-off-by: Alexander Graf <agraf@suse.de>
The g_hash_table_iter_* functions for iterating through a hash table
are not present in glib 2.12, which is our current minimum requirement.
Rewrite the code to use g_hash_table_foreach() instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
The MMU index is an internal detail that should not be needed by the
translator (except to generate loads and stores). Look at the MSR
directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
strncat() will append additional '\0' to destination buffer, so need
additional 1 byte for it, or may cause memory overflow, just like other
area within QEMU have done.
And can use g_strdup_printf() instead of strncat(), which may be more
easier understanding.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The only case when sPAPR NVRAM migrates now is if is backed by a file and
copy-storage migration is performed. In other cases NVRAM does not
migrate regardless whether it is backed by a file or not.
This enables shadow copy of NVRAM in RAM which is read from a file
(if used) and used for reads. Writes to NVRAM are mirrored to the file.
This defines a VMSTATE descriptor for NVRAM device so the memory copy
of NVRAM can migrate and be flushed to a backing file on the destination
if one is specified.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have a working GPIO controller on the virt machine, we can use
one pin to notify QEMU that the guests wants to power off the system.
Signed-off-by: Alexander Graf <agraf@suse.de>
With the e500 virt machine, we don't have to adhere to the exact hardware
layout of an mpc8544ds board. So there we can just add a qoriq compatible
GPIO controller into the system that we can add a power off hook to.
Signed-off-by: Alexander Graf <agraf@suse.de>
On e500 systems most SoCs implement a common GPIO controller that Linux
calls the "mpc8xxx" gpio controller. This patch adds an emulation model
for this device.
Signed-off-by: Alexander Graf <agraf@suse.de>
Opcode table has direct, indirect and double indirect handlers, but
ppc_cpu_unrealizefn() frees direct handlers which are never allocated
and never frees double indirect handlers.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Define and use macros instead of direct numbers wherever
possible in ppc opcodes table handling code.
This doesn't change any code functionality.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The MemoryRegionOps struct pci4xx_cfgaddr_ops and the read and
write functions it references are all unused; remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch add a new processor type 440x5wDFPU for Virtex 5 PPC440
with an external APU FPU in double precision mode
Signed-off-by: Pierre Mallard <mallard.pierre@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch remove limitation for fc[tf]id[*] on 32 bits targets and
add a new insn flag for signed integer 64 conversion PPC2_FP_CVT_S64
Signed-off-by: Pierre Mallard <mallard.pierre@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The in-kernel OpenPIC emulation only supports a single map. However, we
map the OpenPIC at 2 locations: The CPU visible one and the PCI visible
one. For KVM acceleration, we only care about the first one.
To make sure that we only map that first mapping and not the PCI map that
happens dynamically later during bootup, ignore maps that happen when
we are already considering ourselves mapped.
Credits due are to Bogdan and Mihai for debugging this.
Reported-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Reported-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
As of qemu-2.1, spapr/pseries, has a set of versioned machine classes to
represent the machine type as it appeared to the guest in different qemu
versions. This allows for safe migration of guests between current and
future qemu versions.
However, these are organized a bit differently from those for PC: on PC,
the default plain "pc" machine type is just an alias for the most recent
versioned machine type. In sPAPR, it names the base machine class from
which the versioned types are derived.
The PC approach is preferable; it makes it clearer which explicit version
is the current one. Additionally updating the "current" machine as the
base class makes it even more likely than otherwise to incorrectly alter
the versioned machines' behaviour when updating the current machine.
Therefore this patch changes sPAPR to the PC approach - the base class
becomes abstract, and plain "pseries" becomes an alias for the most
recent versioned machine class. Since qemu-2.1 is now released, we also
create a new pseries-2.2 machine type, to incorporate changes during this
development cycle (for now it is identical to pseries-2.1).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The virtex-ml507 is a Xilinx CPU based system, and requires several sub
devices which are only included with CONFIG_XILINX. Therefore, it should
only be compiled if CONFIG_XILINX is set.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Adjust the IVOR mask for generic Book E implementation to support bit 59.
This is consistent with the Power ISA.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reported-by: Pierre Mallard <mallard.pierre@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
By mistake, QEMU uses the maximum compatibility level from the command
line instead of the value negotiated in client-architecture-support call.
This replaces @max_compat with @cpu_version. This only affects guests
which do not support the host CPU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This will match the code we use in fpu_helper.c when we flip
CRF_* bit-endianness.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
It sets CR1, not CR6 (and the spec agrees).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
It must return 8 and place 8 in XER, but the current code uses
i directly which is 9 at this point of the code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This was off-by-one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Make sure we try to list properties from classes that can be safely used
with "-device".
Fixes the following crashes:
$ qemu-system-x86_64 -device x86_64-cpu,help
**
ERROR:qom/object.c:336:object_initialize_with_type: assertion failed: (type->abstract == false)
Aborted (core dumped)
$ qemu-system-x86_64 -device host-x86_64-cpu,help
qemu-system-x86_64: [...]/target-i386/cpu.c:1329: host_x86_cpu_initfn: Assertion `(kvm_allowed)' failed.
Aborted (core dumped)
After applying this patch:
$ qemu-system-x86_64 -device x86_64-cpu,help
Parameter 'driver' expects non-abstract device type
$ qemu-system-x86_64 -device host-x86_64-cpu,help
Parameter 'driver' expects pluggable device type
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Extract the DeviceClass lookup from qdev_device_add() to a separate
function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
