The IDE controller is an integral part of PIIX3 (function 1). So create it as
part of the south bridge.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-12-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Makes the south bridges a bit more self-contained and aligns PIIX3 more with
PIIX4. The latter is needed for consolidating the PIIX south bridges.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-11-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Thie PIIX3 south bridge implements both the PIC and the ISA bus, so wiring the
interrupts there makes the device model more self-contained. Furthermore, this
allows the ISA interrupts to be wired to internal child devices in
pci_piix3_realize() which will be performed in subsequent patches.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-10-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the board assigns the ISA IRQs after the device's realize(), internal
devices such as the RTC can't be wired in ich9_lpc_realize() since the qemu_irqs
are still NULL. Fix that by assigning the ISA interrupts before realize().
This change is necessary for PIIX consolidation because PIIX4 wires the RTC
interrupts in its realize() method, so PIIX3 needs to do so as well. Since the
PC and Q35 boards share RTC code, and since PIIX3 needs the change, ICH9 needs
to be adapted as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-9-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
TYPE_PIIX3_DEVICE doesn't instantiate a PIC since it relies on the board to do
so. The "pic" attribute, however, suggests that there is one. Rename the
attribute to reflect that it represents ISA interrupt lines. Use the same naming
convention as in the VIA south bridges as well as in TYPE_I82378.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-8-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The variable is never used by its declared type. Eliminate it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid assigning the private member of struct PIIX3State from outside which goes
against best QOM practices. Instead, implement best QOM practice by adding an
"isa-irqs" array property to TYPE_PIIX3_DEVICE and assign it in board code, i.e.
from outside.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PIIX_NUM_PIC_IRQS is assumed to be the same as ISA_NUM_IRQS, otherwise
inconsistencies can occur.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-5-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Unlike its PIIX4 counterpart, TYPE_PIIX3_DEVICE doesn't instantiate a PIC
itself. Instead, it relies on the board to do so. This means that the board
needs to wire the ISA IRQs to the PIIX3 device model. As long as the board
assigns the ISA IRQs after PIIX3's realize(), internal devices can't be wired in
pci_piix3_realize() since the qemu_irqs are still NULL. Fix that by assigning
the ISA interrupts before realize(). This will allow for embedding child devices
into the host device as already done for PIIX4.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The next patches will need to take advantage of it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-3-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By being the only entity assigning a non-NULL value to "rtc_irq", the first if
statement determines whether the second if statement is executed. So merge the
two statements into one.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the given uuid is already present in the hash table,
virtio_add_resource() does not add the passed VirtioSharedObject. In
this case, free it in the callers to avoid leaking memory. This fixed
the following `make check` error, when built with --enable-sanitizers:
4/166 qemu:unit / test-virtio-dmabuf ERROR 1.51s exit status 1
==7716==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 320 byte(s) in 20 object(s) allocated from:
#0 0x7f6fc16e3808 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:144
#1 0x7f6fc1503e98 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x57e98)
#2 0x564d63cafb6b in test_add_invalid_resource ../tests/unit/test-virtio-dmabuf.c:100
#3 0x7f6fc152659d (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7a59d)
SUMMARY: AddressSanitizer: 320 byte(s) leaked in 20 allocation(s).
The changes at virtio_add_resource() itself are not strictly necessary
for the memleak fix, but they make it more obvious that, on an error
return, the passed object is not added to the hash.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Message-Id: <c61c13f9a0c67dec473bdbfc8789c29ef26c900b.1696624734.git.quic_mathbern@quicinc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Albert Esteve <aesteve@redhat.com>
Signed-off-by: Matheus Tavares Bernardino <<a href="mailto:quic_mathbern@quicinc.com" target="_blank">quic_mathbern@quicinc.com</a>><br>
Currently, the one-shot (mode 1) PIT expires far too quickly,
due to the output being set under the wrong logic.
This change fixes the one-shot PIT mode to behave similarly to mode 0.
TESTED: using the one-shot PIT mode to calibrate a local apic timer.
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Message-Id: <20230226015755.52624-1-damien@zamaudio.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 6103451aeb ("hw/i386: Build-time assertion on pc/q35 reset register
being identical.") introduced a build-time check where the addresses of the
reset registers are expected to be equal. Back then rev3 of the FADT was used
which required the reset register to be populated and there was common code.
In commit 3a3fcc75f9 ("pc: acpi: force FADT rev1 for 440fx based machine
types") the FADT was downgraded to rev1 for PIIX where the reset register isn't
available. Thus, there is no need for the assertion any longer, so remove it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231004092355.12929-1-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user-scsi has a VirtioDeviceClass->reset() function that calls
->vhost_reset_device(). The other vhost devices don't notify the vhost
device upon reset.
Stateful vhost devices may need to handle device reset in order to free
resources or prevent stale device state from interfering after reset.
Call ->vhost_device_reset() from virtio_reset() so that that vhost
devices are notified of device reset.
This patch affects behavior as follows:
- vhost-kernel: No change in behavior since ->vhost_reset_device() is
not implemented.
- vhost-user: back-ends that negotiate
VHOST_USER_PROTOCOL_F_RESET_DEVICE now receive a
VHOST_USER_DEVICE_RESET message upon device reset. Otherwise there is
no change in behavior. DPDK, SPDK, libvhost-user, and the
vhost-user-backend crate do not negotiate
VHOST_USER_PROTOCOL_F_RESET_DEVICE automatically.
- vhost-vdpa: an extra SET_STATUS 0 call is made during device reset.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231004014532.1228637-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
vhost_kernel_reset_device() invokes RESET_OWNER, which disassociates the
owner process from the device. The device is left non-operational since
SET_OWNER is only called once during startup in vhost_dev_init().
vhost_kernel_reset_device() is never called so this latent bug never
appears. Get rid of vhost_kernel_reset_device() for now. If someone
needs it in the future they'll need to implement it correctly.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231004014532.1228637-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
The VHOST_USER_RESET_OWNER message is deprecated in the spec:
This is no longer used. Used to be sent to request disabling all
rings, but some back-ends interpreted it to also discard connection
state (this interpretation would lead to bugs). It is recommended
that back-ends either ignore this message, or use it to disable all
rings.
The only caller of vhost_user_reset_device() is vhost_user_scsi_reset().
It checks that F_RESET_DEVICE was negotiated before calling it:
static void vhost_user_scsi_reset(VirtIODevice *vdev)
{
VHostSCSICommon *vsc = VHOST_SCSI_COMMON(vdev);
struct vhost_dev *dev = &vsc->dev;
/*
* Historically, reset was not implemented so only reset devices
* that are expecting it.
*/
if (!virtio_has_feature(dev->protocol_features,
VHOST_USER_PROTOCOL_F_RESET_DEVICE)) {
return;
}
if (dev->vhost_ops->vhost_reset_device) {
dev->vhost_ops->vhost_reset_device(dev);
}
}
Therefore VHOST_USER_RESET_OWNER is actually never sent by
vhost_user_reset_device(). Remove the dead code. This effectively moves
the vhost-user protocol specific code from vhost-user-scsi.c into
vhost-user.c where it belongs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231004014532.1228637-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Coverity scan reports multiple false-positive "defects" for the
following series of actions in virtio.c:
MemoryRegionCache indirect_desc_cache;
address_space_cache_init_empty(&indirect_desc_cache);
address_space_cache_destroy(&indirect_desc_cache);
For some reason it's unable to recognize the dependency between 'mrs.mr'
and 'fv' and insists that '!mrs.mr' check in address_space_cache_destroy
may take a 'false' branch, even though it is explicitly initialized to
NULL in the address_space_cache_init_empty():
*** CID 1522371: Memory - illegal accesses (UNINIT)
/qemu/hw/virtio/virtio.c: 1627 in virtqueue_split_pop()
1621 }
1622
1623 vq->inuse++;
1624
1625 trace_virtqueue_pop(vq, elem, elem->in_num, elem->out_num);
1626 done:
>>> CID 1522371: Memory - illegal accesses (UNINIT)
>>> Using uninitialized value "indirect_desc_cache.fv" when
>>> calling "address_space_cache_destroy".
1627 address_space_cache_destroy(&indirect_desc_cache);
1628
1629 return elem;
1630
1631 err_undo_map:
1632 virtqueue_undo_map_desc(out_num, in_num, iov);
** CID 1522370: Memory - illegal accesses (UNINIT)
Instead of trying to silence these false positive reports in 4
different places, initializing 'fv' as well, as this doesn't result
in any noticeable performance impact.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Message-Id: <20231009104322.3085887-1-i.maximets@ovn.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(1) The virtio-1.2 specification
<http://docs.oasis-open.org/virtio/virtio/v1.2/virtio-v1.2.html> writes:
> 3 General Initialization And Device Operation
> 3.1 Device Initialization
> 3.1.1 Driver Requirements: Device Initialization
>
> [...]
>
> 7. Perform device-specific setup, including discovery of virtqueues for
> the device, optional per-bus setup, reading and possibly writing the
> device’s virtio configuration space, and population of virtqueues.
>
> 8. Set the DRIVER_OK status bit. At this point the device is “live”.
and
> 4 Virtio Transport Options
> 4.1 Virtio Over PCI Bus
> 4.1.4 Virtio Structure PCI Capabilities
> 4.1.4.3 Common configuration structure layout
> 4.1.4.3.2 Driver Requirements: Common configuration structure layout
>
> [...]
>
> The driver MUST configure the other virtqueue fields before enabling the
> virtqueue with queue_enable.
>
> [...]
(The same statements are present in virtio-1.0 identically, at
<http://docs.oasis-open.org/virtio/virtio/v1.0/virtio-v1.0.html>.)
These together mean that the following sub-sequence of steps is valid for
a virtio-1.0 guest driver:
(1.1) set "queue_enable" for the needed queues as the final part of device
initialization step (7),
(1.2) set DRIVER_OK in step (8),
(1.3) immediately start sending virtio requests to the device.
(2) When vhost-user is enabled, and the VHOST_USER_F_PROTOCOL_FEATURES
special virtio feature is negotiated, then virtio rings start in disabled
state, according to
<https://qemu-project.gitlab.io/qemu/interop/vhost-user.html#ring-states>.
In this case, explicit VHOST_USER_SET_VRING_ENABLE messages are needed for
enabling vrings.
Therefore setting "queue_enable" from the guest (1.1) -- which is
technically "buffered" on the QEMU side until the guest sets DRIVER_OK
(1.2) -- is a *control plane* operation, which -- after (1.2) -- travels
from the guest through QEMU to the vhost-user backend, using a unix domain
socket.
Whereas sending a virtio request (1.3) is a *data plane* operation, which
evades QEMU -- it travels from guest to the vhost-user backend via
eventfd.
This means that operations ((1.1) + (1.2)) and (1.3) travel through
different channels, and their relative order can be reversed, as perceived
by the vhost-user backend.
That's exactly what happens when OVMF's virtiofs driver (VirtioFsDxe) runs
against the Rust-language virtiofsd version 1.7.2. (Which uses version
0.10.1 of the vhost-user-backend crate, and version 0.8.1 of the vhost
crate.)
Namely, when VirtioFsDxe binds a virtiofs device, it goes through the
device initialization steps (i.e., control plane operations), and
immediately sends a FUSE_INIT request too (i.e., performs a data plane
operation). In the Rust-language virtiofsd, this creates a race between
two components that run *concurrently*, i.e., in different threads or
processes:
- Control plane, handling vhost-user protocol messages:
The "VhostUserSlaveReqHandlerMut::set_vring_enable" method
[crates/vhost-user-backend/src/handler.rs] handles
VHOST_USER_SET_VRING_ENABLE messages, and updates each vring's "enabled"
flag according to the message processed.
- Data plane, handling virtio / FUSE requests:
The "VringEpollHandler::handle_event" method
[crates/vhost-user-backend/src/event_loop.rs] handles the incoming
virtio / FUSE request, consuming the virtio kick at the same time. If
the vring's "enabled" flag is set, the virtio / FUSE request is
processed genuinely. If the vring's "enabled" flag is clear, then the
virtio / FUSE request is discarded.
Note that OVMF enables the queue *first*, and sends FUSE_INIT *second*.
However, if the data plane processor in virtiofsd wins the race, then it
sees the FUSE_INIT *before* the control plane processor took notice of
VHOST_USER_SET_VRING_ENABLE and green-lit the queue for the data plane
processor. Therefore the latter drops FUSE_INIT on the floor, and goes
back to waiting for further virtio / FUSE requests with epoll_wait.
Meanwhile OVMF is stuck waiting for the FUSET_INIT response -- a deadlock.
The deadlock is not deterministic. OVMF hangs infrequently during first
boot. However, OVMF hangs almost certainly during reboots from the UEFI
shell.
The race can be "reliably masked" by inserting a very small delay -- a
single debug message -- at the top of "VringEpollHandler::handle_event",
i.e., just before the data plane processor checks the "enabled" field of
the vring. That delay suffices for the control plane processor to act upon
VHOST_USER_SET_VRING_ENABLE.
We can deterministically prevent the race in QEMU, by blocking OVMF inside
step (1.2) -- i.e., in the write to the device status register that
"unleashes" queue enablement -- until VHOST_USER_SET_VRING_ENABLE actually
*completes*. That way OVMF's VCPU cannot advance to the FUSE_INIT
submission before virtiofsd's control plane processor takes notice of the
queue being enabled.
Wait for VHOST_USER_SET_VRING_ENABLE completion by:
- setting the NEED_REPLY flag on VHOST_USER_SET_VRING_ENABLE, and waiting
for the reply, if the VHOST_USER_PROTOCOL_F_REPLY_ACK vhost-user feature
has been negotiated, or
- performing a separate VHOST_USER_GET_FEATURES *exchange*, which requires
a backend response regardless of VHOST_USER_PROTOCOL_F_REPLY_ACK.
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:vhost)
Cc: Eugenio Perez Martin <eperezma@redhat.com>
Cc: German Maglione <gmaglione@redhat.com>
Cc: Liu Jiang <gerry@linux.alibaba.com>
Cc: Sergio Lopez Pascual <slp@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Albert Esteve <aesteve@redhat.com>
[lersek@redhat.com: work Eugenio's explanation into the commit message,
about QEMU containing step (1.1) until step (1.2)]
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20231002203221.17241-8-lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The "vhost_set_vring" function already centralizes the common parts of
"vhost_user_set_vring_num", "vhost_user_set_vring_base" and
"vhost_user_set_vring_enable". We'll want to allow some of those callers
to wait for a reply.
Therefore, rebase "vhost_set_vring" from just "vhost_user_write" to
"vhost_user_write_sync", exposing the "wait_for_reply" parameter.
This is purely refactoring -- there is no observable change. That's
because:
- all three callers pass in "false" for "wait_for_reply", which disables
all logic in "vhost_user_write_sync" except the call to
"vhost_user_write";
- the fds=NULL and fd_num=0 arguments of the original "vhost_user_write"
call inside "vhost_set_vring" are hard-coded within
"vhost_user_write_sync".
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:vhost)
Cc: Eugenio Perez Martin <eperezma@redhat.com>
Cc: German Maglione <gmaglione@redhat.com>
Cc: Liu Jiang <gerry@linux.alibaba.com>
Cc: Sergio Lopez Pascual <slp@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20231002203221.17241-7-lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to avoid a forward-declaration for "vhost_user_write_sync" in a
subsequent patch, hoist "vhost_user_write_sync" ->
"vhost_user_get_features" -> "vhost_user_get_u64" just above
"vhost_set_vring".
This is purely code movement -- no observable change.
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:vhost)
Cc: Eugenio Perez Martin <eperezma@redhat.com>
Cc: German Maglione <gmaglione@redhat.com>
Cc: Liu Jiang <gerry@linux.alibaba.com>
Cc: Sergio Lopez Pascual <slp@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20231002203221.17241-6-lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At this point, only "vhost_user_write_sync" calls "enforce_reply"; embed
the latter into the former.
This is purely refactoring -- no observable change.
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:vhost)
Cc: Eugenio Perez Martin <eperezma@redhat.com>
Cc: German Maglione <gmaglione@redhat.com>
Cc: Liu Jiang <gerry@linux.alibaba.com>
Cc: Sergio Lopez Pascual <slp@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20231002203221.17241-5-lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The tails of the "vhost_user_set_vring_addr" and "vhost_user_set_u64"
functions are now byte-for-byte identical. Factor the common tail out to a
new function called "vhost_user_write_sync".
This is purely refactoring -- no observable change.
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:vhost)
Cc: Eugenio Perez Martin <eperezma@redhat.com>
Cc: German Maglione <gmaglione@redhat.com>
Cc: Liu Jiang <gerry@linux.alibaba.com>
Cc: Sergio Lopez Pascual <slp@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20231002203221.17241-4-lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the vhost_user_set_vring_addr() function, we calculate
"reply_supported" unconditionally, even though we'll only need it if
"wait_for_reply" is also true.
Restrict the scope of "reply_supported" to the minimum.
This is purely refactoring -- no observable change.
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:vhost)
Cc: Eugenio Perez Martin <eperezma@redhat.com>
Cc: German Maglione <gmaglione@redhat.com>
Cc: Liu Jiang <gerry@linux.alibaba.com>
Cc: Sergio Lopez Pascual <slp@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20231002203221.17241-3-lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch enables sending CVQ state load commands
in parallel at device startup by following steps:
* Refactor vhost_vdpa_net_load_cmd() to iterate through
the control commands shadow buffers. This allows different
CVQ state load commands to use their own unique buffers.
* Delay the polling and checking of buffers until either
the SVQ is full or control commands shadow buffers are full.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1578
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <9350f32278e39f7bce297b8f2d82dac27c6f8c9a.1697165821.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches in this series will delay the polling
and checking of buffers until either the SVQ is
full or control commands shadow buffers are full,
no longer perform an immediate poll and check of
the device's used buffers for each CVQ state load command.
To achieve this, this patch exposes
vhost_svq_available_slots(), allowing QEMU to know
whether the SVQ is full.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <25938079f0bd8185fd664c64e205e629f7a966be.1697165821.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces two new arugments, `out_cursor`
and `in_cursor`, to vhost_vdpa_net_loadx(). Addtionally,
it includes a helper function
vhost_vdpa_net_load_cursor_reset() for resetting these
cursors.
Furthermore, this patch refactors vhost_vdpa_net_load_cmd()
so that vhost_vdpa_net_load_cmd() prepares buffers
for the device using the cursors arguments, instead
of directly accesses `s->cvq_cmd_out_buffer` and
`s->status` fields.
By making these change, next patches in this series
can refactor vhost_vdpa_net_load_cmd() directly to
iterate through the control commands shadow buffers,
allowing QEMU to send CVQ state load commands in parallel
at device startup.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <1c6516e233a14cc222f0884e148e4e1adceda78d.1697165821.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch moves vhost_svq_poll() to the caller of
vhost_vdpa_net_cvq_add() and introduces a helper funtion.
By making this change, next patches in this series is
able to refactor vhost_vdpa_net_load_x() only to delay
the polling and checking process until either the SVQ
is full or control commands shadow buffers are full.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <196cadb55175a75275660c6634a538289f027ae3.1697165821.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Considering that vhost_vdpa_net_load_rx_mode() is only called
within vhost_vdpa_net_load_rx() now, this patch refactors
vhost_vdpa_net_load_rx_mode() to include a check for the
device's ack, simplifying the code and improving its maintainability.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <68811d52f96ae12d68f0d67d996ac1642a623943.1697165821.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches in this series will refactor vhost_vdpa_net_load_cmd()
to iterate through the control commands shadow buffers, allowing QEMU
to send CVQ state load commands in parallel at device startup.
Considering that QEMU always forwards the CVQ command serialized
outside of vhost_vdpa_net_load(), it is more elegant to send the
CVQ commands directly without invoking vhost_vdpa_net_load_*() helpers.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <254f0618efde7af7229ba4fdada667bb9d318991.1697165821.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches in this series will no longer perform an
immediate poll and check of the device's used buffers
for each CVQ state load command. Consequently, there
will be multiple pending buffers in the shadow VirtQueue,
making it a must for every control command to have its
own buffer.
To achieve this, this patch refactor vhost_vdpa_net_cvq_add()
to accept `struct iovec`, which eliminates the coupling of
control commands to `s->cvq_cmd_out_buffer` and `s->status`,
allowing them to use their own buffer.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <8a328f146fb043f34edb75ba6d043d2d6de88f99.1697165821.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function is currently called from two sites, one always gives it a
NULL Error and the other always gives it a non-NULL Error.
In the non-NULL case, all it does it trace the error and return. One
of the callers already have tracing, add a tracepoint to the other and
stop passing the error into the function.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231012134343.23757-4-farosas@suse.de>
The preferred usage of the Error type is to always set both the return
code and the error when a failure happens. As all code called from the
send thread follows this pattern, we'll always have the return code
and the error set at the same time.
Aside from the convention, in this piece of code this must be the
case, otherwise the if (ret != 0) would be exiting the thread without
calling multifd_send_terminate_threads() which is incorrect.
Unify both paths to make it clear that both are taken when there's an
error.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231012134343.23757-3-farosas@suse.de>
We're about to enable support for other transports in multifd, so
remove direct references to sockets.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231012134343.23757-2-farosas@suse.de>
We don't need to do this in two pieces. One single function makes it
easier to grasp, specially since it removes the indirection on the
return value handling.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184604.32364-7-farosas@suse.de>
It makes a bit more sense to have the zero page handling of xbzrle
right where we save the zero page.
Also invert the exit condition to remove one level of indentation
which makes the next patch easier to grasp.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184604.32364-6-farosas@suse.de>
We don't need the QEMUFile when we're already passing the
PageSearchStatus.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184604.32364-5-farosas@suse.de>
'rs' is not used in that function. It's a leftover from commit
9360447d34 ("ram: Use MigrationStats for statistics").
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184604.32364-4-farosas@suse.de>
Extract the ramblock parsing code into a routine that operates on the
sequence of headers from the stream and another the parses the
individual ramblock. This makes ram_load_precopy() easier to
comprehend.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184604.32364-3-farosas@suse.de>
Sometimes multifd sends just sync packet with no pages
(normal_num is 0). In this case the old value is being
preserved and being accounted for while only packet_len
is being transferred.
Reset it to 0 after sending and accounting for.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184358.97349-5-elena.ufimtseva@oracle.com>
Previous commit cbec7eb768
"migration/multifd: Compute transferred bytes correctly"
removed accounting for packet_len in non-rdma
case, but the next_packet_size only accounts for pages, not for
the header packet (normal_pages * PAGE_SIZE) that is being sent
as iov[0]. The packet_len part should be added to account for
the size of MultiFDPacket and the array of the offsets.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184358.97349-4-elena.ufimtseva@oracle.com>
In migration rate limiting atomic operations are used
to read the rate limit variables and transferred bytes and
they are expensive. Check first if rate_limit_max is equal
to RATE_LIMIT_DISABLED and return false immediately if so.
Note that with this patch we will also will stop flushing
by not calling qemu_fflush() from migration_transferred_bytes()
if the migration rate is not exceeded.
This should be fine since migration thread calls in the loop
migration_update_counters from migration_rate_limit() that
calls the migration_transferred_bytes() and flushes there.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184358.97349-2-elena.ufimtseva@oracle.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231013104736.31722-2-quintela@redhat.com>
Change code that is:
int ret;
...
ret = foo();
if (ret[ < 0]?) {
to:
if (foo()[ < 0]) {
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-14-quintela@redhat.com>
Declare all variables that are only used inside a for loop inside the
for statement.
This makes clear that they are not used outside of the for loop.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-13-quintela@redhat.com>
Once there, all the uses are local to the for, so declare the variable
inside the for statement.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-12-quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-11-quintela@redhat.com>
