This reverts commit 73ceb12960.
The "r2d" machine can work in big endian mode, see:
https://lore.kernel.org/qemu-devel/d6755445-1060-48a8-82b6-2f392c21f9b9@landley.net/
So the reasoning for removing sh4eb was wrong.
Message-ID: <20241024082735.42324-2-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Rob Landley <rob@landley.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add gdb XML files and adjust CPU initialization to allow running RV32 CPUs
in RV64 QEMU.
Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240919055048.562-7-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Attempting to run the binary asserts when it can't find the XML entry.
We can fix it so we don't although I suspect other stuff is broken.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/2580
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241023113406.1284676-13-alex.bennee@linaro.org>
Copy XML files describing orig_ax from GDB and glue them with
CPUX86State.orig_ax.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240912093012.402366-5-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Add a property to set vl to ceil(AVL/2)
* Enable numamem testing for RISC-V
* Consider MISA bit choice in implied rule
* Fix the za64rs priv spec requirements
* Enable Bit Manip for OpenTitan Ibex CPU
* Fix the group bit setting of AIA with KVM
* Stop timer with infinite timecmp
* Add 'fcsr' register to QEMU log as a part of F extension
* Fix riscv64 build on musl libc
* Add preliminary textra trigger CSR functions
* RISC-V bsd-user support
* Respect firmware ELF entry point
* Add Svvptc extension support
* Fix masking of rv32 physical address
* Fix linking problem with semihosting disabled
* Fix IMSIC interrupt state updates
-----BEGIN PGP SIGNATURE-----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=15Hm
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.2
* Add a property to set vl to ceil(AVL/2)
* Enable numamem testing for RISC-V
* Consider MISA bit choice in implied rule
* Fix the za64rs priv spec requirements
* Enable Bit Manip for OpenTitan Ibex CPU
* Fix the group bit setting of AIA with KVM
* Stop timer with infinite timecmp
* Add 'fcsr' register to QEMU log as a part of F extension
* Fix riscv64 build on musl libc
* Add preliminary textra trigger CSR functions
* RISC-V bsd-user support
* Respect firmware ELF entry point
* Add Svvptc extension support
* Fix masking of rv32 physical address
* Fix linking problem with semihosting disabled
* Fix IMSIC interrupt state updates
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmb83lYACgkQr3yVEwxT
# gBNndBAAmh66yWt9TeTHlQ/rgBhx2nUMBbfICBWQyNGvPlslffwrNoLkh8jpkuiP
# PD0RQArAAGeM09cgCZCu14JzIBmmNiGgUxsUnqOZvUw18uIlLFlpt/tiT7iGw/Xb
# pfI7waF66/FPXBErY2yiw9/RGQLlkiGNBC9FNYrD/kCahf9MSIobv85tOgSQ2qjH
# nOJ+UBN0TQ1x0Z5lJMj9Pzl1WDvelRnCkYI5nXg1heKG73Hm7GmHt99QpTV2Okqn
# T3jFzEfMTQeHO4nC/X2pbaesE62K+mTg/FZpId2iV8lMCSm1zKof+xJ4boKM9RB2
# 0HjXAT+MveLuLUNtgfbV9C+VgU25M+wnfy5tH0l801Y/Gez8Q1fbK2uykuiyiUSy
# MNNk/KzmOYuffwItuyeL3mmWHXsN+izUIeMmMxfL9X9nssZXRsrDXc+MByS7w0fk
# QOeZmXHTxXwxFymr0t0DLK2eKEG6cqQty1KWp6iLx3uwnMTGo+576P41Q+boj64s
# VllWzmuR0Ta0xuSR4sDvEFCO7OCFEgVdn1j0FvhRFskPEDrbQgXRLq8i3awtU6z1
# NIh+A30XeK+EZLv0sEje6gav5lZHWMfAeCOKJstVzOl8+NQibuKTUrsqLgTrBK6K
# plw8qwvZYjSnYErzHfywlq9ArufIvOHYcx9Nb76tLNy9E+y01yo=
# =15Hm
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 02 Oct 2024 06:47:02 BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu: (35 commits)
bsd-user: Add RISC-V 64-bit Target Configuration and Debug XML Files
bsd-user: Implement set_mcontext and get_ucontext_sigreturn for RISCV
bsd-user: Implement 'get_mcontext' for RISC-V
bsd-user: Implement RISC-V signal trampoline setup functions
bsd-user: Define RISC-V signal handling structures and constants
bsd-user: Add generic RISC-V64 target definitions
bsd-user: Define RISC-V system call structures and constants
bsd-user: Define RISC-V VM parameters and helper functions
bsd-user: Add RISC-V thread setup and initialization support
bsd-user: Implement RISC-V sysarch system call emulation
bsd-user: Add RISC-V signal trampoline setup function
bsd-user: Define RISC-V register structures and register copying
bsd-user: Add RISC-V ELF definitions and hardware capability detection
bsd-user: Implement RISC-V TLS register setup
bsd-user: Implement RISC-V CPU register cloning and reset functions
bsd-user: Add RISC-V CPU execution loop and syscall handling
bsd-user: Implement RISC-V CPU initialization and main loop
hw/intc: riscv-imsic: Fix interrupt state updates.
target/riscv/cpu_helper: Fix linking problem with semihosting disabled
target/riscv32: Fix masking of physical address
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since the "shix" machine has been removed, the "r2d" machine is the only
machine that is still available for the sh4 and sh4eb targets. However,
the "r2d" machine apparently does not work in big endian mode, see here:
https://lore.kernel.org/qemu-devel/87a5fwjjew.wl-ysato@users.sourceforge.jp/
So there is no working machine left in the sh4eb-softmmu target, i.e. it
is currently completely useless. Thus remove it from the configuration
now. (Note: The linux-user binary is not removed since it might still
be used to run sh4 binaries in big endian mode).
Message-ID: <20240926105843.81385-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Added configuration for RISC-V 64-bit target to the build system.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-18-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since kernel v6.11 loongarch has moved from syscall_nr.h file
to syscall.tbl (26a3b85bac08 ("loongarch: convert to generic syscall
table"))
Update linux-user scripts to be able to retrieve syscall numbers
from linux syscall.tbl instead of syscall_nr.h.
New syscall.tbl is imported from linux v6.11 using updated
scripts/update-syscalltbl.sh
Remove scripts/gensyscalls.sh that is now useless.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240920151034.859533-6-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since kernel v6.11 hexagon has moved from syscall_nr.h file
to syscall.tbl (36d69c29759e ("hexagon: use new system call table"))
Update linux-user scripts to be able to retrieve syscall numbers
from linux syscall.tbl instead of syscall_nr.h.
New syscall.tbl is imported from linux v6.11 using updated
scripts/update-syscalltbl.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240920151034.859533-5-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since kernel v6.11 riscv has moved from syscall_nr.h file
to syscall.tbl (3db80c999deb ("riscv: convert to generic syscall
table"))
Update linux-user scripts to be able to retrieve syscall numbers
from linux syscall.tbl instead of syscall_nr.h.
New syscall.tbl is imported from linux v6.11 using updated
scripts/update-syscalltbl.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240920151034.859533-4-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since kernel v6.11 openrisc has moved from syscall_nr.h file
to syscall.tbl (See 77122bf9e3df ("openrisc: convert to generic syscall
table"))
Update linux-user scripts to be able to retrieve syscall numbers
from linux syscall.tbl instead of syscall_nr.h.
New syscall.tbl is imported from linux v6.11 using updated
scripts/update-syscalltbl.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240920151034.859533-3-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since kernel v6.11 aarch64 has moved from syscall_nr.h file
to syscall_64.tbl (See e632bca07c8e ("arm64: generate 64-bit
syscall.tbl"))
Update linux-user scripts to be able to retrieve syscall numbers
from linux syscall_64.tbl instead of syscall_nr.h.
New syscall_64.tbl is imported from linux v6.11 using
updated scripts/update-syscalltbl.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240920151034.859533-2-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are about to remove the CRIS target, so remove
the sysemu part. This remove the CRIS 'none' machine.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-13-philmd@linaro.org>
As per the deprecation notice in commit c7bbef4023:
The CRIS architecture was pulled from Linux in 4.17 and
the compiler is no longer packaged in any distro making
it harder to run the `check-tcg` tests. Unless we can
improve the testing situation there is a chance the code
will bitrot without anyone noticing.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-5-philmd@linaro.org>
Add the aarch64 bsd-user fragments needed to build the new aarch64 code.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
GDB already support LoongArch vector extension[1], QEMU gdb adds
LoongArch vector registers support, so that users can use 'info all-registers'
to get all vector registers values.
[1]: https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=1e9569f383a3d5a88ee07d0c2401bd95613c222e
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewd-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240711024454.3075183-1-gaosong@loongson.cn>
With KVM virtualization, debug exception is injected to guest kernel
rather than host for normal break intruction. Here hypercall
instruction with special code is used for sw breakpoint usage,
and detailed instruction comes from kvm kernel with user API
KVM_REG_LOONGARCH_DEBUG_INST.
Now only software breakpoint is supported, and it is allowed to
insert/remove software breakpoint. We can debug guest kernel with gdb
method after kernel is loaded, hardware breakpoint will be added in later.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240607035016.2975799-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
This commit implements the stubs to handle the qIsAddressTagged,
qMemTag, and QMemTag GDB packets, allowing all GDB 'memory-tag'
subcommands to work with QEMU gdbstub on aarch64 user mode. It also
implements the get/set functions for the special GDB MTE register
'tag_ctl', used to control the MTE fault type at runtime.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-Id: <20240628050850.536447-11-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-40-alex.bennee@linaro.org>
To enable the KVM GUEST DEBUG for RISC-V at QEMU side.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606014501.20763-4-duchao@eswincomputing.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since boards can express their dependency on libfdt and
system/device_tree.c, only leave TARGET_NEED_FDT if the target has a
hard dependency.
Those emulators will be skipped if libfdt is disabled, or if it
is "auto" and not found and --disable-download is passed; unless
the target is mentioned explicitly in --target-list, in which case
the build will fail.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Nios II target is deprecated since v8.2 in commit 9997771bc1
("target/nios2: Deprecate the Nios II architecture").
Remove:
- Buildsys / CI infra
- User emulation
- System emulation (10m50-ghrd & nios2-generic-nommu machines)
- Tests
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Message-Id: <20240327144806.11319-3-philmd@linaro.org>
If an architecture adds support for KVM_CAP_SET_GUEST_DEBUG but QEMU does not
have the necessary code, QEMU will fail to build after updating kernel headers.
Avoid this by using a #define in config-target.h instead of KVM_CAP_SET_GUEST_DEBUG.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
loongarch64-linux-user has references to XML files so include them.
Fixes: d32688ecdb ("default-configs: Add loongarch linux-user support")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231030054834.39145-6-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[AJB: remove base32 from list]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231106185112.2755262-2-alex.bennee@linaro.org>
Allow both user-only and system mode to run pa2.0 cpus.
Avoid creating a separate qemu-system-hppa64 binary;
force the qemu-hppa binary to use TARGET_ABI32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will be of small comfort to sparc64, because both
sun4u and sun4v board models force max_cpus = 1.
But it does enable actual smp for sparc32 sun4m.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GPRs and PC are 32-bit wide in loongarch32 mode.
Signed-off-by: Jiajie Chen <c@jia.je>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20230817093121.1053890-4-gaosong@loongson.cn>
[PMD: Rebased, set gdb_num_core_regs]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230821125959.28666-9-philmd@linaro.org>
In gen_ldx/gen_stx, the only two locations for memory operations,
mark the operation as either aligned (softmmu) or unaligned
(user-only, as if emulated by the kernel).
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Both TCG and KVM emulate ckc, cputm, last_break and prefix, and it's
quite useful to have them during debugging. Right now they are grouped
together with KVM-only pp, pfault_token, pfault_select and
pfault_compare in s390-virt.xml, and are not available when debugging
TCG-emulated code.
Move KVM-only registers into the new s390-virt-kvm.xml file. Advertise
s390-virt.xml always, and the new s390-virt-kvm.xml only for KVM.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230314101813.174874-1-iii@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The extension is primarily defined by the Linux kernel NT_ARM_PAC_MASK
ptrace register set.
The original gdb feature consists of two masks, data and code, which are
used to mask out the authentication code within a pointer. Following
discussion with Luis Machado, add two more masks in order to support
pointers within the high half of the address space (i.e. TTBR1 vs TTBR0).
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1105
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227213329.793795-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mirroring the upstream gdb xml files, the two stack boundary
registers are separated out.
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qemu-system-nios2 uses the functions from libfdt in hw/nios2/boot.c,
so this target has to be marked with TARGET_NEED_FDT=y in its config
file.
Message-Id: <20230119125745.2028814-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch enables multithread TCG for OpenRISC. Since the or1k shared
syncrhonized timer can be updated from each vCPU via helpers we use a
mutex to synchronize updates.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Rename loongarch-fpu64.xml to loongarch-fpu.xml and update
loongarch-fpu.xml to match upstream GDB [1]
[1]:https://github.com/bminor/binutils-gdb/blob/master/gdb/features/loongarch/fpu.xml
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220805033523.1416837-5-gaosong@loongson.cn>
Add LoongArch flatted device tree, adding cpu device node, firmware cfg node,
pcie node into it, and create fdt rom memory region. Now fdt info is not
full since only uefi bios uses fdt, linux kernel does not use fdt.
Loongarch Linux kernel uses acpi table which is full in qemu virt
machine.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220712083206.4187715-7-yangxiaojuan@loongson.cn>
[rth: Set TARGET_NEED_FDT, add fdt to meson.build]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch adds loongarch64 linux-user default configs file.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Message-Id: <20220624031049.1716097-13-gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In arm-compat-semi.c, we have more advanced treatment of
guest file descriptors than we do in other implementations.
Split out GuestFD and related functions to a new file so
that they can be shared.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-42-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emulate a 3A5000 board use the new loongarch instruction.
3A5000 belongs to the Loongson3 series processors.
The board consists of a 3A5000 cpu model and the virt
bridge. The host 3A5000 board is really complicated and
contains many functions.Now for the tcg softmmu mode
only part functions are emulated.
More detailed info you can see
https://github.com/loongson/LoongArch-Documentation
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-31-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Unaligned traps are optional, but required with an mmu.
Turn them on always, because the fallback behaviour undefined.
Enable alignment checks in the config file.
Unwind the guest pc properly from do_unaligned_access.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-48-richard.henderson@linaro.org>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using the device tree means that qemu can now directly tell
the kernel what hardware is configured rather than use having
to maintain and update a separate device tree file.
This patch adds automatic device tree generation support for the
OpenRISC simulator. A device tree is built up based on the state of the
configure openrisc simulator.
This is then dumped to memory and the load address is passed to the
kernel in register r3.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
It's likely broken, and nobody cared for picking it up again
during the deprecation phase, so let's remove this now.
Since this is the last entry in deprecated_targets_list, remove
the related code in the configure script, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215084958.185214-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220112112722.3641051-32-alex.bennee@linaro.org>
