Intel SDM says for CPUID function 0DH, sub-function 0:
| • ECX enumerates the size (in bytes) required by the XSAVE instruction for an
| XSAVE area containing all the user state components supported by this
| processor.
| • EBX enumerates the size (in bytes) required by the XSAVE instruction for an
| XSAVE area containing all the user state components corresponding to bits
| currently set in XCR0.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Message-Id: <20180928104319.3296-1-bigeasy@linutronix.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
-----BEGIN PGP SIGNATURE-----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=sHPv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging
QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
# gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request:
milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report
ppc: move at24c to its own CONFIG_ symbol
hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro
hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro
tests/bios-tables-test: Remove an useless cast
xen: Use the PCI_DEVICE macro
qobject: Catch another straggler for use of qdict_put_str()
configure: Support pkg-config for zlib
tests: Fix typos in comments and help message (found by codespell)
cpu.h: fix a typo in comment
linux-user: fix comment s/atomic_write/atomic_set/
qemu-iotests: make 218 executable
scripts/qemu.py: remove trailing quotes on docstring
scripts/decodetree.py: remove unused imports
docs/devel/testing.rst: add missing newlines after code block
qemu-iotests: fix filename containing checks
tests/tcg/README: fix location for lm32 tests
memory.h: fix typos in comments
vga_int: remove unused function protype
configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJb1yMkAAoJENSXKoln91plSrUIAIp8e63jdI/YX8gIp0iEVZmJ
+QDAfgTRc3/zvIFYie4A4mEnEj6c8iwmrvINalxQ+tZDtNcMLU8zI+0bz2YxwgiT
1YbVrhNPJxqx65YOqwEAQ/vjlCC3iVtTP6s6eKpR5MZRBLUWrkuEub6gDWpKxrK0
lfSRXS8Bj2gAOzefxeLIcFhBcV/z8hlRe7wxGpSjmPcJ36G3Bv28nyV+LbfmCsTb
QekIrEUtxlSqNJbb1apZHP1754mKURc43KoH6ZdXWXQWj2RedARltIfVxbprR0bK
huYwwSSl1fD7ltvJW1gXGYKdRABUbvTMeRsheA7YwGXlIjeQLOAnkwc8ZwQkidU=
=A7R3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-october-2018-part-4' into staging
MIPS queue for October 2018, part 4
# gpg: Signature made Mon 29 Oct 2018 15:11:32 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-october-2018-part-4: (27 commits)
linux-user: Add prctl() PR_SET_FP_MODE and PR_GET_FP_MODE implementations
linux-user: Determine the desired FPU mode from MIPS.abiflags
linux-user: Read and set FP ABI value from MIPS abiflags
linux-user: Extract MIPS abiflags from ELF file
linux-user: Extend image_info struct with MIPS fp_abi and interp_fp_abi fields
elf: Define MIPS_ABI_FP_UNKNOWN macro
target/mips: Amend MXU ASE overview note
target/mips: Move MXU_EN check one level higher
target/mips: Add emulation of MXU instructions S32LDD and S32LDDR
target/mips: Add emulation of MXU instructions Q8MUL and Q8MULSU
target/mips: Add emulation of MXU instruction D16MAC
target/mips: Add emulation of MXU instruction D16MUL
target/mips: Add emulation of MXU instruction S8LDD
target/mips: Move MUL, S32M2I, S32I2M handling out of main MXU switch
target/mips: Add emulation of MXU instructions S32I2M and S32M2I
target/mips: Add emulation of non-MXU MULL within MXU decoding engine
target/mips: Add bit encoding for MXU operand getting pattern 'optn3'
target/mips: Add bit encoding for MXU operand getting pattern 'optn2'
target/mips: Add bit encoding for MXU execute add/sub pattern 'eptn2'
target/mips: Add bit encoding for MXU accumulate add/sub 2-bit pattern 'aptn2'
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_log_mask(GUEST_ERROR) is more appropriate:
$ qemu -d help
Log items (comma separated):
guest_errors log when the guest OS does something invalid (eg accessing a non-existent register)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael Walle <michael@walle.cc>
Message-Id: <20181029130034.26750-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
AT24c EEPROM is currently gated by CONFIG_I2C, and as such it is
being included in all emulators that use I2C, even if they do not
really need it. Separate it and, since it was added for the e500
machines, add it to qemu-system-ppc and qemu-system-ppc64.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20180522191743.12872-1-pbonzini@redhat.com>
[lv: rebase]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Test that we can resume source vm after [failed] migration, and bitmaps
are ok.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Before previous patch, iotest 169 was actually broken for the case
test_persistent__not_migbitmap__offline_shared, while formally
passing.
After migration log of vm_b had message:
qemu-system-x86_64: Could not reopen qcow2 layer: Bitmap already
exists: bitmap0
which means that invalidation failed and bs->drv = NULL.
It was because we've loaded bitmap twice: on open and on invalidation.
Add code to 169, to catch such fails.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
This patch aims to bring the following behavior:
1. We don't load bitmaps, when started in inactive mode. It's the case
of incoming migration. In this case we wait for bitmaps migration
through migration channel (if 'dirty-bitmaps' capability is enabled) or
for invalidation (to load bitmaps from the image).
2. We don't remove persistent bitmaps on inactivation. Instead, we only
remove bitmaps after storing. This is the only way to restore bitmaps,
if we decided to resume source after [failed] migration with
'dirty-bitmaps' capability enabled (which means, that bitmaps were not
stored).
3. We load bitmaps on open and any invalidation, it's ok for all cases:
- normal open
- migration target invalidation with dirty-bitmaps capability
(bitmaps are migrating through migration channel, the are not
stored, so they should have IN_USE flag set and will be skipped
when loading. However, it would fail if bitmaps are read-only[1])
- migration target invalidation without dirty-bitmaps capability
(normal load of the bitmaps, if migrated with shared storage)
- source invalidation with dirty-bitmaps capability
(skip because IN_USE)
- source invalidation without dirty-bitmaps capability
(bitmaps were dropped, reload them)
[1]: to accurately handle this, migration of read-only bitmaps is
explicitly forbidden in this patch.
New mechanism for not storing bitmaps when migrate with dirty-bitmaps
capability is introduced: migration filed in BdrvDirtyBitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
We need an accurate count of the number of bits set in a bitmap
after a merge. In particular, since the merge operation short-circuits
a merge from an empty source, if you have bitmaps A, B, and C where
B started empty, then merge C into B, and B into A, an inaccurate
count meant that A did not get the contents of C.
In the worst case, we may falsely regard the bitmap as empty when
it has had new writes merged into it.
Fixes: be58721db
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002233314.30159-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Whether it's "locked" or "frozen", it's in use and should
not be allowed for the purposes of this operation.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002230218.13949-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
If the bitmap is frozen, we shouldn't touch it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002230218.13949-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We're not being consistent about this. If it's in use by an operation,
the user should not be able to change the behavior of that bitmap.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002230218.13949-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Similarly to merge, it's OK to allow clear operations on disabled
bitmaps, as this condition only means that they are not recording
new writes. We are free to clear it if the user requests it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002230218.13949-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In prior commits that made merge transactionable, we removed the
assertion that merge cannot operate on disabled bitmaps. In addition,
we want to make sure that we are prohibiting merges to "locked" bitmaps.
Use the new user_locked function to check.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002230218.13949-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of both frozen and qmp_locked checks, wrap it into one check.
frozen implies the bitmap is split in two (for backup), and shouldn't
be modified. qmp_locked implies it's being used by another operation,
like being exported over NBD. In both cases it means we shouldn't allow
the user to modify it in any meaningful way.
Replace any usages where we check both frozen and qmp_locked with the
new check.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20181002230218.13949-2-jsnow@redhat.com
[w/edits Suggested-By: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>]
Signed-off-by: John Snow <jsnow@redhat.com>
This variable doesn't work as it should, because it is actually cleared
in qcow2_co_invalidate_cache() by memset(). Drop it, as the following
patch will introduce new behavior.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[Maintainer edit -- touched up error message. --js]
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
New action is like clean action: do the whole thing in .prepare and
undo in .abort. This behavior for bitmap-changing actions is needed
because backup job actions use bitmap in .prepare.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Rename block-dirty-bitmap-clear transaction handlers to reuse them for
x-block-dirty-bitmap-merge transaction in the following patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Add backup parameter to bdrv_merge_dirty_bitmap() to be used then with
bdrv_restore_dirty_bitmap() if it needed to restore the bitmap after
merge operation.
This is needed to implement bitmap merge transaction action in further
commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Use more generic names to reuse the function for bitmap merge in the
following commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Move checks from qmp_x_block_dirty_bitmap_merge() to
bdrv_merge_dirty_bitmap(), to share them with dirty bitmap merge
transaction action in future commit.
Note: for now, only qmp_x_block_dirty_bitmap_merge() calls
bdrv_merge_dirty_bitmap().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
It is only an oversight that we don't allow incremental backup with
blockdev-backup. Add the bitmap argument which enables this.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20180830211605.13683-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Implement MIPS specific prctl() PR_SET_FP_MODE and PR_GET_FP_MODE emulation.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Floating-point mode is calculated from MIPS.abiflags FP ABI value
(based on kernel implementation). Illegal combinations are rejected.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Set fp_abi and interp_fp_abi values to current fp_abi value read from
MIPS.abiflags.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Read MIPS.abiflags section from ELF file into Mips_elf_abiflags_v0 struct.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add MIPS specific image_info struct fields fp_abi and interp_fp_abi
to store executable and interpreter fp_abi values (based on kernel
struct arch_elf_state in mips/include/asm/elf.h).
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add MIPS_ABI_FP_UNKNOWN as QEMU internal value to represent
unknown fp_abi (based on kernel mips/include/asm/elf.h definition)
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Future spice-server versions will call the client_monitors_config
callback with the monitors list filtered to only include the monitors
of the given display channel (aka QXLInstance). Luckily this is easily
detectable at runtime, so we can prepare for that in advance and also
make qemu compatible with both old and new spice-server versions.
While being at it also use the console index instead of head number as
array index. The later doesn't work correctly in case multiple display
devices are present.
Cc: spice-devel@lists.freedesktop.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Lukáš Hrázký <lhrazky@redhat.com>
Message-id: 20181012114551.28809-1-kraxel@redhat.com
Without that, window effects in KWin get suspended as soon as any
qemu-sdl window becomes visible. While the SDL default makes sense
for games, it's not really suitable for QEMU.
Signed-off-by: Sebastian Krzyszkowiak <dos@dosowisko.net>
Message-id: 20181024143748.4425-1-dos@dosowisko.net
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I spent way too much time trying to figure out why the emulated NVDIMM
was missing under Linux. In an effort to help others who might be looking
for these kinds of things in the future, include a hint.
Signed-off-by: Kees Cook <keescook@chromium.org>
Message-id: 20181018201351.GA25286@beast
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add prefix, suffix, operation descriptions, and other corrections
and amendments to the comment that describes MXU ASE.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Move MXU_EN check to the main MXU decoding function, to avoid code
repetition.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the S32LDD and S32LDDR MXU instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Adds support for emulating the Q8MUL and Q8MULSU MXU instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the D16MAC MXU instruction.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the D16MUL MXU instruction.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the S8LDD MXU instruction.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Move MUL, S32M2I, S32I2M handling out of switch. These are all
instructions that do not depend on MXU_EN flag of MXU_CR.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the S32I2M and S32M2I MXU instructions.
This commit also contains utility functions for reading/writing
to MXU registers. This is required for overall MXU instruction
support.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
