DisplayChangeListener is passed now to all DisplayChangeListenerOps
callbacks, so we can use that to access the qxl state and kill the
qxl0 global variable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split callbacks into separate Ops struct. Pass DisplayChangeListener
pointer as first argument to all callbacks. Uninline a bunch of
display functions and move them from console.h to console.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All PCI nics are switched to EFI-enabled roms by default. They are
composed from three images (legacy, efi ia32 & efi x86), so classic
pxe booting will continue to work.
Exception: eepro100 is not switched, it uses a single rom for all
emulated eepro100 variants, then goes patch the rom header on the
fly with the correct PCI IDs. I doubt that will work as-is with
the efi roms.
Keep old roms for 1.4+older machine types via compat properties,
needed because the efi-enabled roms are larger so the pci rom bar
size would change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
libvirt has a long-standing bug: when removing the device,
it can request removal but does not know when the
removal completes. Add an event so we can fix this in a robust way.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Added additional commands to the switch to check for when snooping commands in
dual bus mode setups. Cleaned up code to use an enum.
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 848c116c711dab0af10729a487968384aadd9faf.1362373359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The R_LQPSI_CFG register has the LQSPI_CFG_SEP_BUS and LQSPI_CFG_TWO_MEM bits.
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: d76c8e364c80a42352ae4f0661aff2cd17ad32a4.1362373359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Device model for Primecell PL330 DMA controller.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Tested-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 098aac26233d7334bed2bca4f06f539638ca6d24.1361853677.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the SYS_CFG_OSC function. Since the idea of
programmable clock rates doesn't make much sense for QEMU,
we simply allow the clock rate to be read back as written.
The number and value of the daughterboard oscillators varies
between daughterboards, so we provide an array property to
allow their reset values to be configured.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass voltage sensor properties to the sysctl device. Since
these are daughterboard specific, we specify them via the
VEDBoardInfo structure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1359985476-29380-9-git-send-email-peter.maydell@linaro.org
Implement the SYS_CFG_VOLT registers which return the voltage
of various supplies on motherboard and daughterboard. Since
QEMU implements a perfectly stable power supply these registers
always return a constant value. The number and value of the
daughterboard voltages is dependent on the specific daughterboard,
so we use a property array to allow the board to configure them
appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for declaring array properties for qdev devices.
These work by defining an initial static property 'len-arrayname'
which the user of the device should set to the desired size
of the array. When this property is set, memory is allocated
for the array elements, and dynamic properties "arrayname[0]",
"arrayname[1]"... are created so the user of the device can
then set the values of the individual array elements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert this device from old-style qdev init to an instance_init
function. We don't need a realize function yet, though.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SYS_CFG_DVIMODE allows the guest to select whether the
output DVI signal is VGA, SVGA, XGA, SGA or UXGA. Since
this makes no difference to QEMU, implement writes as a
no-op so Linux doesn't complain.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SYS_CFG_MUXFPGA allows the guest to select whether the
video output should come from the motherboard's LCD
controller or the daughterboard's one. Since QEMU doesn't
currently support selecting the video output like this,
implement as a no-op, so Linux doesn't complain about
the register not being implemented.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SYS_CFGCTRL register consists of separate fields
for DCC, function, site, position and device, as well
as a read/write bit. Refactor the code handling SYS_CFGCTRL
writes to make it easier to add support for functions
like SYS_CFG_OSC which support multiple device fields.
We also pull the handling out into its own function for
clarity, as there are potentially a lot of implementable
subfunctions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass the daughterboard-specific proc_id property to the code that
creates the sysctl device via the VEDBoardInfo struct, rather than
by having the daughterboard init function write to a uint32_t*
argument. This is a cleaner way to pass the info around, and
is in line with the way we are going to handle voltage and
oscillator initialization.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# By Stefan Hajnoczi (14) and others
# Via Stefan Hajnoczi
* stefanha/block: (28 commits)
blockdev: Fix up copyright and permission notice
qemu-iotests: use -nographic in test case 007
qemu-iotests: add tests for rebasing zero clusters
dataplane: fix hang introduced by AioContext transition
coroutine: use AioContext for CoQueue BH
threadpool: drop global thread pool
block: add bdrv_get_aio_context()
aio: add a ThreadPool instance to AioContext
threadpool: add thread_pool_new() and thread_pool_free()
threadpool: move globals into struct ThreadPool
main-loop: add qemu_get_aio_context()
sheepdog: set io_flush handler in do_co_req
sheepdog: use non-blocking fd in coroutine context
qcow2: make is_allocated return true for zero clusters
qcow2: drop unnecessary flush in qcow2_update_snapshot_refcount()
qcow2: drop flush in update_cluster_refcount()
qcow2: flush in qcow2_update_snapshot_refcount()
qcow2: set L2 cache dependency in qcow2_alloc_bytes()
qcow2: flush refcount cache correctly in qcow2_write_snapshots()
qcow2: flush refcount cache correctly in alloc_refcount_block()
...
# By Christian Borntraeger (1) and Cornelia Huck (1)
# Via Cornelia Huck
* cohuck/virtio-ccw-upstr:
virtio-ccw: Wire up virtio-rng.
virtio-ccw: remove qdev_unparent in unplug routing
The bug is that the EventNotifiers do have a NULL io_flush callback.
Because _none_ of the callbacks on the dataplane AioContext have such a
callback, aio_poll will simply do nothing. Fixed by adding the callbacks:
the ioeventfd will always be polled (this can change in the future to
pause/resume the processing during live snapshots or similar operations);
the ioqueue will be polled if there are outstanding requests.
I must admit I have screwed up my testing somehow, because commit
2c20e71 does not work even if cherry-picked on top of 1.4.0, and this
patch fixes it there as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It doesn't do anything yet except storing the options QDict in the
BlockDriverState.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch fixes unplugging a virtio-ccw device. We no
longer need to do that in virtio-ccw since common code does now
proper handling.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move it to qom/cpu.c to avoid build failures depending on include order
of cpu-qom.h and exec/cpu-all.h.
Change opaques of various ..._irq_handler() functions to the
appropriate CPU type to facilitate using cpu_reset_interrupt().
Fix Coding Style issues while at it (missing braces, indentation).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
They are never changed once initialized, and moving them to the class
will allow to inspect them before instantiating.
Signed-off-by: Andreas Färber <afaerber@suse.de>
A conflict was resolved the wrong way when merging commit 320ba5f (build:
always link device_tree.o into emulators if libfdt available, 2013-02-05).
This causes a build failure for the arm-softmmu target due to multiply
defined symbol.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1362997886-9470-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* origin/master: (75 commits)
tcg: Don't make exitreq flag a local temporary
Makefile: Add subdir dependency on config-devices-all.mak
make_device_config.sh: Emit dependency file to directory where included
Revert "make_device_config.sh: Fix target path in generated dependency file"
s390/virtio-ccw: remove redundant call to blockdev_mark_auto_del
s390/css: Fix subchannel detection
Allow virtio-net features for legacy s390 virtio bus
s390: virtio-ccw maintainer
s390: simplify kvm cpu init
pseries: Add compatible property to root of device tree
target-ppc: Move CPU aliases out of translate_init.c
target-ppc: Report CPU aliases for QMP
target-ppc: List alias names alongside CPU models
target-ppc: Make host CPU a subclass of the host's CPU model
PPC: xnu kernel expects FLUSH to be cleared on STOP
PPC: Fix dma interrupt
target-ppc: Fix PPC_DUMP_SPR_ACCESS build
target-ppc: Synchronize FPU state with KVM
target-ppc: Add mechanism for synchronizing SPRs with KVM
Save memory allocation in the elf loader
...
* bonzini/hw-dirs:
sh: move files referencing CPU to hw/sh4/
ppc: move more files to hw/ppc
ppc: move files referencing CPU to hw/ppc/
m68k: move files referencing CPU to hw/m68k/
i386: move files referencing CPU to hw/i386/
arm: move files referencing CPU to hw/arm/
hw: move boards and other isolated files to hw/ARCH
ppc: express FDT dependency of pSeries and e500 boards via default-configs/
build: always link device_tree.o into emulators if libfdt available
hw: include hw header files with full paths
ppc: do not use ../ in include files
vt82c686: vt82c686 is not a PCI host bridge
virtio-9p: remove PCI dependencies from hw/9pfs/
virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX
hw: move device-hotplug.o to toplevel, compile it once
hw: move qdev-monitor.o to toplevel directory
hw: move fifo.[ch] to libqemuutil
hw: move char backends to backends/
Conflicts:
backends/baum.c
backends/msmouse.c
hw/a15mpcore.c
hw/arm/Makefile.objs
hw/arm/pic_cpu.c
hw/dataplane/event-poll.c
hw/dataplane/virtio-blk.c
include/char/baum.h
include/char/msmouse.h
qemu-char.c
vl.c
Resolve conflicts caused by header movements.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Lei Li (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
Fix the wrong description in qemu manual
pci_host: Drop write-only address_space field
rng-random: Use qemu_open / qemu_close
configure: Require at least spice-protocol-0.12.3
osdep: replace setsockopt by qemu_setsockopt
lm32: remove unused function
rtc-test: Fix test failures with recent glib
configure: Create link to icon bitmap for out-of-tree builds
# By Paolo Bonzini (4) and Peter Lieven (2)
# Via Paolo Bonzini
* bonzini/scsi-next:
scsi-disk: handle io_canceled uniformly and correctly
scsi-disk: do not complete canceled UNMAP requests
scsi: do not call scsi_read_data/scsi_write_data for a canceled request
iscsi: look for pkg-config file too
iscsi: add iscsi_truncate support
iscsi: retry read, write, flush and unmap on unit attention check conditions
* 's390-for-upstream' of git://github.com/agraf/qemu:
s390/virtio-ccw: remove redundant call to blockdev_mark_auto_del
s390/css: Fix subchannel detection
Allow virtio-net features for legacy s390 virtio bus
s390: virtio-ccw maintainer
s390: simplify kvm cpu init
* 'ppc-for-upstream' of git://github.com/agraf/qemu: (66 commits)
pseries: Add compatible property to root of device tree
target-ppc: Move CPU aliases out of translate_init.c
target-ppc: Report CPU aliases for QMP
target-ppc: List alias names alongside CPU models
target-ppc: Make host CPU a subclass of the host's CPU model
PPC: xnu kernel expects FLUSH to be cleared on STOP
PPC: Fix dma interrupt
target-ppc: Fix PPC_DUMP_SPR_ACCESS build
target-ppc: Synchronize FPU state with KVM
target-ppc: Add mechanism for synchronizing SPRs with KVM
Save memory allocation in the elf loader
pseries: Implement h_read hcall
target-ppc: Change "POWER7" CPU alias
target-ppc: Fix remaining microcontroller typos among models
target-ppc: Split model definitions out of translate_init.c
target-ppc: Update Coding Style for CPU models
target-ppc: Turn descriptive CPU model comments into device descriptions
target-ppc: Turn descriptive CPU family comments into device descriptions
target-ppc: Set remaining fields on CPU family classes
target-ppc: Register all types for TARGET_PPCEMB
...
blockdev_mark_auto_del is already called in virtio-blk-exit.
Remove the redundant call.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We have to consider the m bit to find the real channel subsystem when
determining the last subchannel.
If we fail to take this into account, removal of a subchannel in
the middle of a big list of devices will stop device detection after
a reboot.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Enable all virtio-net features for the legacy s390 virtio bus. This also fixes
kernel BUG at /usr/src/packages/BUILD/kernel-default-3.0.58/linux-3.0/drivers/s390/kvm/kvm_virtio.c:121!
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, for the pseries machine the device tree supplied by qemu to SLOF
and from there to the guest does not include a 'compatible property' at the
root level. Usually that works fine, since in this case the compatible
property doesn't really give any information not already found in the
'device_type' or 'model' properties.
However, the lack of 'compatible' confuses the bootloader install in the
SLES11 SP2 and SLES11 SP3 installers. This patch therefore adds a token
'compatible' property to work around that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
In openbios (drivers/ide.c) they are set to
0000000d 00000000 00000002 00000000
0000000e 00000000 00000003 00000000
0000000f 00000000 00000004 00000000
(The last one seems to be not implemented in qemu)
It follows convention of how they are set on real machines,
both ide and dma ones are increased
Real machine one:
http://web.archive.org/web/20090107151044/http://penguinppc.org/historical/dev-trees-html/g4_agp_500_2.html
00000013 00000001 0000000b 00000000
00000014 00000001 0000000c 00000000
00000015 00000001 0000000d 00000000
Signed-off-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The current elf loader uses too much memory. For example, I have a
executable with a bss section of 400 MB and I set the ram size to 512
MB. Qemu uses about 780MB of RAM (which is fine), but there's a peak at
1.6 GB during initialization (this is not fine).
This patch fixes two things:
1) do not allocate each elf program twice.
2) do not allocate memory for areas that are only zeros.
For this we need a new field in Rom: "datasize" which is the size of the
allocated data. If datasize is less than romsize, it means that the area
from datasize to romsize is filled with zeros.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This h_call is useful for DLPAR in future amongst other things. Given an index
it fetches the corresponding PTE stored in the htab.
Signed-off-by: Erlon Cruz <erlon.cruz@br.flextronics.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the spapr-vlan device does not supply a cleanup call for its
NetClientInfo structure. With current qemu versions, that leads to a SEGV
on exit, when net_cleanup() attempts to call the cleanup handlers on all
net clients.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
virtio-console.c used to return a value less than the number of bytes
asked to be written out to a chardev backend in case the backend is not
writable. virtio-serial-bus.c then implicitly enabled flow control for
that port.
Make this explicit instead.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Message-id: f5ec50b068c25422256e499cf4adc06d353bf394.1362505276.git.amit.shah@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The virtio-serial-bus already has the logic to make flow control work
properly. Hook into the char layer's new ability to signal a backend is
writable again.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Message-id: abffa02235d55ca6e2489068c58971c8897e976c.1362505276.git.amit.shah@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The address_space field of PCIHostState was only ever written, never used.
Drop it completely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The milkymist-minimac device in fact does not exist at all.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The BIT6 of Status Register(SR):
SR[6] behaves the same as R/B# pin
SR[6] = 0 indicates the device is busy;
SR[6] = 1 means the device is ready
Some NAND flash controller (i.e. ftnandc021) relies on the SR[6]
to determine if the NAND flash erase/program is success or error timeout.
P.S:
The exmaple NAND flash datasheet could be found at following link:
http://www.mxic.com.tw/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/8FEA549237D2F7674825795800104C26/$File/MX30LF1G08AA,%203V,%201Gb,%20v1.1.pdf
Signed-off-by: Kuo-Jung Su <dantesu@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Always check it immediately after calling bdrv_acct_done, and
always do a "goto done" in case the "done" label has to free
some memory---as is the case for scsi_unmap_complete in the
previous patch.
This patch could fix problems that happen when a request is
split into multiple parts, and one of them is canceled. Then
the next part is fired, but the HBA's cancellation callbacks have
fired already. Whether this happens or not, depends on how the
block/ driver implements AIO cancellation. It it does a simple
bdrv_drain_all() or similar, then it will not have a problem.
If it only cancels the given AIOCB, this scenario could happen.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Canceled requests should never be completed, and doing that could cause
accesses to a NULL hba_private field.
Cc: qemu-stable@nongnu.org
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Tested-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement support for using the KVM in-kernel GIC for ARM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Convert the ARM GIC classes to use init/realize rather than
SysBusDevice::init. (We have to do them all in one patch to
avoid unconverted subclasses calling a nonexistent SysBusDevice
init function in the base class and crashing.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Add presave/postload hooks to the ARM GIC common base class.
These will be used by the KVM in-kernel GIC subclass to sync
state between kernel and userspace when migrating.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Add basic support for KVM on ARM architecture.
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
[PMM: Minor tweaks and code cleanup, switch to ONE_REG]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
# By MORITA Kazutaka (5) and others
# Via Stefan Hajnoczi
* stefanha/block:
block: for HMP commit() operations on 'all', skip non-COW drives
sheepdog: add support for connecting to unix domain socket
sheepdog: use inet_connect to simplify connect code
sheepdog: accept URIs
move socket_set_nodelay to osdep.c
slirp/tcp_subr.c: fix coding style in tcp_connect
dataplane: remove EventPoll in favor of AioContext
virtio-blk: fix unplug + virsh reboot
ide/macio: Fix macio DMA initialisation.
Mostly bugfixes, but also some ICH work by Laszlo.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRL1gUAAoJECgfDbjSjVRpIk4IAL17zSadWgd99ZrH6EtZ3/cw
mhuxgm+vRfZPHl82lGC/NthLrTbJ5hpVe1Ff9vrMIkx3OZsh97iqoXS4iPjo9804
Pb5zhDqHJQJDTQKCllb9seu6e5D9Fw3aPp+BcH5QfyEOc/X5l0c5IffRdo6xDT9G
1dDEywntl/wwfCej/kVBu4H7G2/bF7wEMvda7kvBPzZsc6y0TsDSAewk5EX54+/p
wRKw8IBa/T2/ldSoBcqPW1Zd2oeuvKhty4vrXlO1UVZi+uTWNmJxUm6Z1GqNInvE
im0FGlSxwTJF7nX3JQv6tB46GRL8V/IC5+9I5UJc5nT8ScrX4rIxRbJTnsRkn4Y=
=eUQN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
virtio,vhost,pci,e1000
Mostly bugfixes, but also some ICH work by Laszlo.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 28 Feb 2013 07:13:56 AM CST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
Set virtio-serial device to have a default of 2 MSI vectors.
ICH9 LPC: Reset Control Register, basic implementation
Fix guest OS hang when 64bit PCI bar present
e1000: unbreak the guest network migration to 1.3
vhost: memory sync fixes
# By Jason Wang (2) and others
# Via Stefan Hajnoczi
* stefanha/net:
qmp: netdev_add is like -netdev, not -net, fix documentation
doc: document -netdev hubport
net: reduce the unnecessary memory allocation of multiqueue
tap: set IFF_ONE_QUEUE per default
tap: forbid creating multiqueue tap when hub is used
net: fix unbounded NetQueue
net: fix qemu_flush_queued_packets() in presence of a hub
During the review of the dataplane code, the EventPoll API morphed itself
(not concidentially) into something very very similar to an AioContext.
Thus, it is trivial to convert virtio-blk-dataplane to use AioContext,
and a first baby step towards letting dataplane talk directly to the
QEMU block layer.
The only interesting note is the value-copy of EventNotifiers. At least
in my opinion this is part of the EventNotifier API and is even portable
to Windows. Of course, in this case you should not close the notifier's
underlying file descriptors or handle with event_notifier_cleanup.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio-blk registers a vmstate change handler. Unfortunately this
handler is not unregistered on unplug, leading to some random
crashes if the system is restarted, e.g. via virsh reboot.
Lets unregister the vmstate change handler if the device is removed.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 07a7484e5d accidentally introduced a bug
in the initialisation of the second macio DMA device which could cause some
DMA operations to segfault QEMU.
CC: Andreas Färber <afaerber@suse.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Done with this script:
cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `find . -type f`
This is so that paths remain valid as files are moved.
Instead, files in hw/dataplane are referenced with the relative path.
We know they are not going to move to include/, and they are the only
include files that are in subdirectories _and_ move.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The situation with device-hotplug.c is similar to qdev-monitor.c.
Add a stub for pci_drive_hot_add, so that it can be compiled once,
and move it out of hw/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qdev-monitor.c is the only "core qdev" file that is not used in
user-mode emulation, and it does not define anything that is used
by hardware models. Remove it from the hw/ directory and
remove hw/qdev-monitor.h from hw/qdev.h too; this requires
some files to have some new explicitly includes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This doesn't happen in the real hardware. The Zynq TRM explicitly states that
this bit has no effect on the rx descriptor pointer ("The receive queue
pointer register is unaffected").
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 06fdf92b78ee62d8965779bafd29c8df1a5d2718.1360901435.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bits in the ISR were continually mirroring their corresponding TX/RX SR bits.
This is incorrect. The ISR bits are only ever set at the time their
corresponding event occurs.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: cedfb6d108318846480b416a6041023ea5a353d6.1360901435.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The gem_receive() function replicates the logic for whether or not the device
can rx. Just call the actual gem_can_receive() function in place.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: bf7f93969f3e01fbc76d68d2955307fdbad11bb1.1360901435.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, M25P80 uses an object property to differentiate between flash parts.
Changed this over to use QOM sub-classes - the actual names of the different parts
are used to create a set of dynamic classes which passes the part info as class
data. The object no longer needs to search the known_devices table for itself,
instead it just gets its info from its own class.
Kept the intermediate class definition private to m25p80.c for the moment, as
the expectation is parts will only be added as new entries in the table. We can
factor out the TYPE_M25P80 abstraction into a header on a demand basis.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: e24e156d-ff96-4901-997a-e31178b08bee@VA3EHSMHS021.ehs.local
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Xilinx Zynq device has two SDHCI controllers. Added to the machine model.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Device model for standard SD Host Controller Interface (SDHCI) compliant with
version 2.00 of SD association specification.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split the SCU in a9mpcore out into its own object definition. mpcore is now
just a container for the mpcore components.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This field was write only and thus unused. Removed.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In QEMU emulation, there is no functional difference between the ARM mpcore
private timers and watchdogs. Removed all the distinction between the two from
arm_mptimer.c and converted it to be just the mptimer. a9mpcore and arm11mpcore
just instantiate the same mptimer object twice to get both timer and WDT.
If in the future we want to make the WDT functionally different then we can use
either QOM hierarchy to derive WDT from from mptimer, or we can add a property
"is-wdt" or some such.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To conform with QEMU coding style.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Trivial find replace on type names "timerblock" and "arm_mptimer_state" to
conform with QEMU coding style.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code for handling the default "unknown command state" case in
pflash_read in pflash_cfi01.c comments "reset state & treat it as
a read". However the code doesn't actually do this. Moving the
default case to the top of the switch so it can fall through into
the read case brings this file into line with pflash_cfi02 and
makes the code behave as the comments suggest.
The pflash_cfi01 code has always had this bug -- it was presumably
introduced when the original author copied the cfi02 code and
rearranged the order of the switch statement without noticing
that the default case relied on the fall-through.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1358777318-7579-3-git-send-email-peter.maydell@linaro.org
The Intel flash command set requires that a read operation after
doing a 'single byte write' command returns the status register;
add this case to pflash_read() so we return the correct information.
Similarly, the case for the 0x28 flavour of block erase was missing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1358777318-7579-2-git-send-email-peter.maydell@linaro.org
The proper mapping between 24 hours and 12 hours modes is:
0 12 AM
1-11 1-11 AM
12 12 PM
13-23 1-11 PM
Fix code accordingly.
Signed-off-by: Antoine Mathys <barsamin@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virtio-serial device is expected to use 2 MSI vectors, one for
control queue and a second shared for all queues.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit does the same for the ICH9 LPC as commit 1ec4ba74 for the
PIIX3. For the present we're ignoring the Full Reset (FULL_RST) and System
Reset (SYS_RST) bits; the guest can read them back but that's it.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch addresses the issue fully described here:
http://lists.nongnu.org/archive/html/qemu-devel/2013-02/msg01804.html
Linux kernels prior to 2.6.36 do not disable the PCI device during
enumeration process. Since lower and higher parts of a 64bit BAR
are programmed separately this leads to qemu receiving a request to occupy
a completely wrong address region for a short period of time.
We have found that the boot process screws up completely if kvm-apic range
is overlapped even for a short period of time (it is fine for other
regions though).
This patch raises the priority of the kvm-apic memory region, so it is
never pushed out by PCI devices. The patch is quite safe as it does not
touch memory manager.
Signed-off-by: Alexey Korolev <akorolex@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU 1.3 does not emulate the link auto negotiation, so if migrate to a
1.3 machine during link auto negotiation, the guest link will be set to down.
Fix this by just disabling auto negotiation for 1.3 and older.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Edivaldo reports a problem that the array of NetClientState in NICState is too
large - MAX_QUEUE_NUM(1024) which will wastes memory even if multiqueue is not
used.
Instead of static arrays, solving this issue by allocating the queues on demand
for both the NetClientState array in NICState and VirtIONetQueue array in
VirtIONet.
Tested by myself, with single virtio-net-pci device. The memory allocation is
almost the same as when multiqueue is not merged.
Cc: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes two bugs related to memory sync during
migration:
- ram address calculation was missing the chunk
address, so the wrong page was dirtied
- one after last was used instead of the
end address of a region, which might overflow to 0
and cause us to skip the region when the region ends at
~0x0ull.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
# By Paolo Bonzini (7) and others
# Via Kevin Wolf
* kwolf/for-anthony: (22 commits)
pc: add compatibility machine types for 1.4
blockdev: enable discard by default
qemu-nbd: add --discard option
blockdev: add discard suboption to -drive
block: implement BDRV_O_UNMAP
block: complete all IOs before .bdrv_truncate
coroutine: trim down nesting level in perf_nesting test
coroutine: move pooling to common code
qemu-iotests: Test qcow2 image creation options
qemu-iotests: Add qemu-img compare test
qemu-img: Add compare subcommand
qemu-img: Add "Quiet mode" option
block: Add synchronous wrapper for bdrv_co_is_allocated_above
block: refuse negative iops and bps values
block: use Error in do_check_io_limits()
qcow2: support compressed clusters in BlockFragInfo
qemu-img: add compressed clusters to BlockFragInfo
qemu-img: fix missing space in qemu-img check output
qcow2: record fragmentation statistics during check
qcow2: introduce check_refcounts_l1/l2() flags
...
This fixes the following compilation error:
hw/usb/hcd-xhci.c:1156:17: error: format ‘%llx’ expects argument of type
‘long long unsigned int’, but argument 4 has type ‘unsigned int’
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Because discard is now a host parameter, we can always fake it as enabled
in the guest. This is an extension of the current choice to ignore
"not supported" errors from the host when discard_granularity is set
to nonzero.
The default granularity is set to the logical block size or 4k, whichever
is largest, because cluster sizes below 4k are rarely used and 4K is a
typical block size for files.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 8550a02d12 added a streams
parameter to usb_wakeup and didn't update redirect.c. Fix it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In case host and guest endianness differ the vga code first creates
a shared surface (using qemu_create_displaysurface_from), then goes
patch the surface format to indicate that the bytes must be swapped.
The switch to pixman broke that hack as the format patching isn't
propagated into the pixman image, so ui code using the pixman image
directly (such as vnc) uses the wrong format.
Fix that by adding a byteswap parameter to
qemu_create_displaysurface_from, so we'll use the correct format
when creating the surface (and the pixman image) and don't have
to patch the format afterwards.
[ v2: unbreak xen build ]
Cc: qemu-stable@nongnu.org
Cc: mark.cave-ayland@ilande.co.uk
Cc: agraf@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1361349432-23884-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I was trying to launch a PowerPC "bamboo" machine with more than 256MB of RAM
with qemu-system-ppc -M bamboo -kernel $kernel -initrd $ramdisk -m 512, but QEMU
would just hang. However, when I used -m 256, the machine would boot.
I looked through the code in hw/ and it seems there is an error when the
RAM memory is setup (if my understanding is correct).
After patching it, the machine launched and booted successfully with 512MB of
RAM.
Signed-off-by: Alin Tomescu <tomescu.alin@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This gives an awful silent failure when it doesn't work. Assert against link
creation failure.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add streams support to the xhci emulation. No secondary streams yet,
only linear stream arays are supported for now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for usb3 streams to the usb subsystem core.
This is just adding a streams field / parameter in a number of places.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix the ordering of the endpoint descriptors for superspeed endpoints:
The superspeed companion must come first, possible additional
descriptors for the endpoint after that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb_packet_copy can handle combined packets now,
so it isn't needed to special-case them any more.
Also use the new usb_packet_size() function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code handling the "-usbdevice host:..." legacy command line
syntax is moved to the new hw/usb/host-legacy.c file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Leave the core usb devices (usb hub, tablet, mouse, keyboard)
enabled unconditionally. Make the other ones configurable.
Exceptions:
- bluetooth: not qdevified yet, has a vl.c dependency because
of that, thus disabling isn't as easy as not linking the
object file.
- smardcard: ccid-card-emulated depends on that one *and*
CONFIG_SMARTCARD_NSS. So it isn't a one-liner and comes
as separate patch because of that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Prepares for assigning IRQs before QOM realize.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1361010446-1427-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to instantiate a CPU subtype we will need to know which type,
so move the cpu_model splitting into cpu_x86_init().
Parameters need to be set on the X86CPU instance, so move
cpu_x86_parse_featurestr() into cpu_x86_init() as well.
This leaves cpu_x86_register() operating on the model name only.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The helper functions all access ppc-specific fields only so don't bother
to change arguments to PowerPCCPU and use env_ptr instead.
No functional change.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Potentially env could be NULL whereas cpu would still be valid and
correspond to a previous env.
Wrapping this in qemu_get_cpu(), env is no longer needed, so simplify
code that existed before 55e5c28502.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since we still need env for ppc-specific fields, obtain it via the new
env_ptr fields to avoid "cpu" name conflicts between CPUState and
PowerPCCPU for now.
This fixes a potential issue with env being NULL at the end of the loop
but cpu still being a valid pointer corresponding to a previous env.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Explictly NULL it on CPU reset since it was located before breakpoints.
Change vapic_report_tpr_access() argument to CPUState. This also
resolves the use of void* for cpu.h independence.
Change vAPIC patch_instruction() argument to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Rename the public-facing function cpu_set_log to qemu_set_log. This
requires us to rename the internal-only qemu_set_log() to
do_qemu_set_log().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The device returns false from the can receive function when the FIFO is
full. This means the device should check for buffered input whenever a byte is
popped from the FIFO.
Reported-by: Jason Wu <huanyu@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1360632571-25638-1-git-send-email-peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There are two ways to express an interruption subclass:
- As a bitmask, as used in cr6.
- As a number, as used in the I/O interruption word.
Unfortunately, we have treated to I/O interruption word as if it
contained the bitmask as well, which went unnoticed so far as
- (queued-for-next) kvm made the same mistake, and
- Linux guest kernels don't check the isc value in the I/O interruption
word for subchannel interrupts.
Make sure that we treat the I/O interruption word correctly.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Starting a qemu with an sclp console and pressing a key very early
can result in
"qemu-system-s390x: hw/s390x/sclpconsole.c:60: receive_from_chr_layer:
Assertion `scon->iov' failed."
Lets make sure that the init process is finished, since the iov is
allocated after CHR_EVENT_OPENED by also checking for scon->iov.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This function has nothing to do with ethernet. Its reusable for all DMA clients.
Dropped the "ethernet" in the name accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Pulled the qdev_create functionality out of xilinx_axiethernet_create() and
pushed it up to the petalogix_ml605_mmu machine model. This makes the ethernet
create+init process consistent with the AXI DMA. Renamed function to
xilinx_axiethernet_init accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Atmel, SST and Intel/Numonyx serial flash tend to power up
with the software protection bits set.
And thus the new m25p80.c in linux kernel would always tries
to use WREN(0x06) + WRSR(0x01) to turn-off the protection.
The WEL(0x02) of status register is supposed to be cleared after
WRSR(0x01). There are also some drivers (i.e mine for RTOSes)
would check the WEL(0x02) in status register to make sure the
protection is correctly turned off.
Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Use error_printf() instead, so the help gets presented more nicely.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1360354939-10994-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The arguments of error_report() should yield a short error string
without newlines.
A few places try to print additional help after the error message by
embedding newlines in the error string. That's nice, but let's do it
the right way.
Since I'm touching these lines anyway, drop a stray preposition and
some tabs. We don't use tabs for similar messages elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1360354939-10994-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The IRQ number of the second EHCI controller should be 76, not 75.
Signed-off-by: Liming Wang <walimisdev@gmail.com>
Tested-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The new multiqueue feature adds fields to the virtio device config, which
breaks Windows guests. Disable the feature by default until the Windows
drivers are fixed.
Signed-off-by: Jesse Larrew <jlarrew@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, the config size for virtio devices is hard coded. When a new
feature is added that changes the config size, drivers that assume a static
config size will break. For purposes of backward compatibility, there needs
to be a way to inform drivers of the config size needed to accommodate the
set of features enabled.
aliguori: merged in
- hw/virtio-net: use existing macros to implement endof
- hw/virtio-net: fix config_size data type
Signed-off-by: Jesse Larrew <jlarrew@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When the pxa2xx performance counter related cp14 registers were converted
from a switch-statement implementation to the new table driven cpregs
format in commit dc2a9045c, the crn and crm values for all these
registers were accidentally transposed. Fix this mistake, which was
causing OpenBSD for Zaurus to fail to boot.
Reported-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We use the clunk request to do the actual xattr operation. So don't
ignore the error value for fid clunk.
Security model "none" don't support posix acl. Without this patch
guest won't get EOPNOTSUPP error on setxattr("system.posix_acl_access")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fixes a couple of regression bugs introduced by
b9d03e352c and related to
auto-negotiation:
- Auto-negotiation currently sets link up even if it was
forced down from the monitor.
- If Auto-negotiation was in progress during migration,
link will never come up.
As a fix, don't touch NC link_down field at all,
instead add code on receive path to check
guest link status.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
b0b873a078 bumped the vmstate version and
introduced an old-style load function to handle migration from prior
(<= 1.2) versions.
The load function passes the top-level PIIX4PMState pointer to
vmstate_load_state() to handle nested structs for APMState and
pci_status, which leads to corruption of the top-level PIIX4PMState,
since pointers to the nested structs are expected.
A segfault can be fairly reliably triggered by migrating from 1.2 and
issuing a reset, which will trigger a number of QOM operations which
rely on the now corrupted ObjectClass/Object members.
Fix this by passing in the expected pointers for vmstate_load_state().
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qdev_free and qbus_free have to do unparent+unref, because nobody else
drops the initial reference (the one included by object_initialize)
before them.
For device_init_func and do_device_add, this is trivially correct,
since the DeviceState goes out of scope.
For qdev_create, qdev_try_create and qbus_init, it is a bit more tricky.
What we are doing here is just assuming that the caller knows what it's
doing, and won't call qdev_free/qbus_free while the device is still there.
This is a pretty reasonable assumption and (behind the scenes) is also
what GObject/GTK does. GTK actually has a "floating reference" that
goes away as soon as the caller does gtk_container_add or something
like that, but in the end qbus_init and qdev_try_create are already
adding the new object to its qdev parent! So in the end the two solutions
are the same.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We want object_delete to disappear, and we will do this one class at a
time. Inline it for the qdev case, which we will tackle first.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that the unparent callbacks are complete, we can correctly account
more missing references.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Similarly, a bus holds a reference back to the device, and this will
prevent the device from going away as soon as this reference is counted
properly. To avoid this, move the unrealization of devices to the
unparent callback. This includes recursively unparenting all the buses
and (after the previous patch) the devices on those buses, which ensures
that the web of references completely disappears for all devices that
reside (in the qdev tree) below the one being unplugged.
After this patch, the qdev tree and the bus<->child relationship is
defined as "A is above B, iff unplugging A will automatically unplug B".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A device will never be finalized as long as it has a reference from
other devices that sit on its buses. To ensure that the references
go away, deassociate a bus from its children in the unparent callback
for the bus.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Each device has a reference through the BusChild. This reference
was not accounted for, add it now.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove knowledge of QOM innards. The common part of pci_bus_new and
pci_bus_new_inplace is moved to a new function pci_bus_init.
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make it clear that no BUS() macro is needed in the callers (in fact it
wouldn't work because the object has not been initialized yet with the
right class).
Suggested-by: Andreas Faerber <afaerber@suse.de>
Acked-by: Andreas F=E4rber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move the common part to qbus_realize.
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch add migration support for multiqueue virtio-net. Instead of bumping
the version, we conditionally send the info of multiqueue only when the device
support more than one queue to maintain the backward compatibility.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch implements both userspace and vhost support for multiple queue
virtio-net (VIRTIO_NET_F_MQ). This is done by introducing an array of
VirtIONetQueue to VirtIONet.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue virtio-net, the first step is to separate the virtqueue
related fields from VirtIONet to a new structure VirtIONetQueue. The following
patches will add an array of VirtIONetQueue to VirtIONet based on this patch.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a queue_index to VirtQueue and a helper to fetch it, this could be used by
multiqueue supported device.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some device (such as virtio-net) needs the ability to destroy or re-order the
virtqueues, this patch adds a helper to do this.
Signed-off-by: Jason Wang <jasowang>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch lets vhost support multiqueue. The idea is simple, just launching
multiple threads of vhost and let each of vhost thread processing a subset of
the virtqueues of the device. After this change each emulated device can have
multiple vhost threads as its backend.
To do this, a virtqueue index were introduced to record to first virtqueue that
will be handled by this vhost_net device. Based on this and nvqs, vhost could
calculate its relative index to setup vhost_net device.
Since we may have many vhost/net devices for a virtio-net device. The setting of
guest notifiers were moved out of the starting/stopping of a specific vhost
thread. The vhost_net_{start|stop}() were renamed to
vhost_net_{start|stop}_one(), and a new vhost_net_{start|stop}() were introduced
to configure the guest notifiers and start/stop all vhost/vhost_net devices.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds basic multiqueue support for qemu. The idea is simple, an array
of NetClientStates were introduced in NICState, parse_netdev() were extended to
find and match all NetClientStates belongs to the backend and place their
pointers in NICConf. Then qemu_new_nic can setup a N:N mapping between NICStates
that belongs to a nic and NICStates belongs to the netdev. And a queue_index
were introduced in NetClientState to track its index. After this, each peers of
a NICState were abstracted as a queue.
After this change, all NetClientState that belongs to the same backend/nic has
the same id. When use want to change the link status, all NetClientStates that
belongs to the same backend/nic will be also changed. When user want to delete
a device or netdev, all NetClientStates that belongs to the same backend/nic
will be deleted also. Changing or deleting an specific queue is not allowed.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue nic, this patch separate the nic destructor from
qemu_del_net_client() to a new helper qemu_del_nic() since the mapping bettween
NiCState and NetClientState were not 1:1 in multiqueue. The following patches
would refactor this function to support multiqueue nic.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue, this patch introduces a helper qemu_get_nic() to get
NICState from a NetClientState. The following patches would refactor this helper
to support multiqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue, the patch introduce a helper qemu_get_queue()
which is used to get the NetClientState of a device. The following patches would
refactor this helper to support multiqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
DeviceState::parent_bus is document as private and should be accessed
through qdev_get_parent_bus(). Use a DEVICE() cast instead of accessing
ISADevice's qdev field directly. Use ISA_BUS() in place of DO_UPCAST().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is not being used in hot paths and is obsoleted by I2C_SLAVE()
QOM cast macro. Clean it up using a scripted conversion, so that it
doesn't get used in new code.
Some of its callers were combining it with FROM_I2C_SLAVE() macro, which
is equally obsolete but needs to be replaced in a type-specific way.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Kuo-Jung Su <dantesu@faraday-tech.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 84dd212024.
I'm not sure what issue the original commit was meant to fix, or if
the logic is actually wrong, but it causes e1000 to stop working
after a guest issues a reset.
>From what I can tell a guest with an e1000 nic has no way of changing
the link status, as far as it's NetClient peer is concerned, except
in the auto-negotiation path, so with this patch in place there's no
recovery after a reset, since the link goes down and stays that way.
Revert this patch now to fix the bigger problem, and handle any
lingering issues with a follow-up.
Reproduced/tested with qemu-jeos and Ubuntu 12.10.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Andreas Färber
# Via Alexander Graf
* agraf/s390-for-upstream:
target-s390x: Pass S390CPU to s390_{add, del}_running_cpu()
target-s390x: Clean up cpu_inject_*() signatures
target-s390x: Fix debug output
target-s390x: Fix debug output (continued)
# By Andreas Färber
# Via Andreas Färber
* afaerber/qom-cpu:
linux-user: bsd-user: Don't reset X86CPU twice
target-i386: Pass X86CPU to cpu_x86_set_a20()
target-unicore32: Rename CPU subtypes
target-openrisc: Rename CPU subtypes
target-openrisc: TYPE_OPENRISC_CPU should be abstract
target-m68k: Rename CPU subtypes
target-m68k: Mark as unmigratable
target-s390x: Mark as unmigratable
target-sh4: Mark as unmigratable
target-xtensa: Mark as unmigratable
target-microblaze: Mark as unmigratable
target-unicore32: Mark as unmigratable
ide/mmio: QOM'ify MMIO IDE for R2D
This includes my timestamp generation cleanup,
Amos's and my work on virtio net commands,
pci,e1000,vfio and piix fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRCmGLAAoJECgfDbjSjVRp6PUH/1YsrRgrPUEhrhHwM4OPAMB5
D/kcTwrS4R7XNk6HRElfVnPbDYl2iIqi7a6RrY/x2jQvMBaghT5v6w07kg9gCooF
qNpHUr0y2YHy9yIFpG36SntqDmXXqvd4ngAMn7EviDH6OvwI8dSqbIVRUFc8yw5c
g+EyEQpyZieBVEGnWPEl6qDo4KFw9nU3p0A93fsQnKikXet00d+V01hQ4TALbBxk
EkeM1tYTjVlHOZAPsq6I2/CvRCO7YbIaboJJ9ZQ83GCX7TEsYELaMOc1qxVOAv0k
rKVijwqyHvhncxumPM/NIUuSnQTQxxeJmV4mWLARPGSh7FYorqMesnY4p1aX4RQ=
=k7PQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
virtio,make,pci,e1000,vfio,piix
This includes my timestamp generation cleanup,
Amos's and my work on virtio net commands,
pci,e1000,vfio and piix fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 31 Jan 2013 06:20:27 AM CST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (6) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
vfio-pci: Enable PCIe extended config space
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set
ich9: add support for pci assignment
virtio-net: rename ctrl rx commands
virtio-net: introduce a new macaddr control
virtio-net: remove layout assumptions for ctrl vq
virtio-net: revert mac on reset
rules/mak: make clean should blow away timestamp files
Makefile: clean timestamp generation rule
rules.mak: cleanup config generation rules
e1000: document ICS read behaviour
This prepares for moving the halted field to CPUState.
Most call sites can already supply S390CPU, for some env becomes unused.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Despite cautioning that S390CPU is needed for upcoming CPUState
refactorings, commit 5d69c547d9 (s390:
I/O interrupt and machine check injection.) added functions
cpu_inject_io() and cpu_inject_crw_mchk() with CPUS390XState argument,
claiming consistency with cpu_inject_ext().
This complicates making cpu_interrupt() take a CPUState even more and it
required to pass &cpu->env from some S390CPU-aware call sites already,
creating inconsistency elsewhere. Address that.
This also eliminates the need for CPUS390XState in s390_virtio_irq().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Prepares for cpu_interrupt() changing argument to CPUState.
While touching it, rename to x86_cpu_...() now that it takes an X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
It was not qdev'ified before, so turn it into a SysBusDevice.
Keep mmio_ide_init_drives() around to attach the hard drive.
Signed-off-by: Andreas Färberr <afaerber@suse.de>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
# By Christoffer Dall (1) and Peter Maydell (1)
# Via Peter Maydell
* pmaydell/arm-devs.next:
hw/vexpress: Use correct HBI (board model number) for vexpress-a15
hw/arm_sysctl: Clear sysctl cfgctrl start bit
# By Markus Armbruster (12) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
qmp-commands.hx: s/tray-open/tray_open/ to match qapi schema
tests: Fix {rtc, m48t59}-test build on illumos
qemu-pixman.h: Avoid mutual inclusion loop with console.h
qemu-ga: Fix unchecked strdup() by converting to g_strdup()
qapi: Fix unchecked strdup() by converting to g_strdup()
libcacard: Fix unchecked strdup() by converting to g_strdup()
qemu-log: Plug trivial memory leak in cpu_set_log_filename()
qemu-log: Fix unchecked strdup() by converting to g_strdup()
virtfs-proxy-helper: Fix unchecked strdup() by conv. to g_strdup()
spice: Fix unchecked strdup() by converting to g_strdup()
readline: Fix unchecked strdup() by converting to g_strdup()
hw/9pfs: Fix unchecked strdup() by converting to g_strdup()
g_strdup(NULL) returns NULL; simplify
g_malloc(0) and g_malloc0(0) return NULL; simplify
xilinx_axidma: Fix debug mode compile messages
cadence_gem: Debug mode compile fixes
cadence_ttc: Debug mode compile fixes
vnc: Clean up vncws_send_handshake_response()
# By Andreas Färber
# Via Andreas Färber
* afaerber-or/prep-up:
prep: Move PReP machine to hw/ppc/
prep_pci: Convert to QOM realizefn
prep_pci: Create PCIBus and PCIDevice in-place
The vexpress-a15 QEMU model is supposed to be a V2P-CA15; the HBI
(a kind of board model number) for this coretile is 237, not 217.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The start bit should only be set to indicate that a function call is
underway, right now. When done with function, clear it.
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Note: the allocation in virtio_9p_init() is still leaked. To be fixed
in a followup commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Once upon a time, it was decided that qemu_malloc(0) should abort.
Switching to glib retired that bright idea. Some code that was added
to cope with it (e.g. in commits 702ef63, b76b6e9) is still around.
Bury it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Missing cast one one of the conditionally compiled printfs.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some printfs are throwing warnings when debug mode is enabled. Fixed.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some printfs are throwing warnings when debug mode is enabled. Fixed.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We don't know pre-init time whether the device we're exposing is PCIe
or legacy PCI. We could ask for it to be specified via a device
option, but that seems like too much to ask of the user. Instead we
can assume everything will be PCIe, which makes PCI-core allocate
enough config space. Removing the flag during init leaves the space
allocated, but allows legacy PCI devices to report the real device
config space size to rest of Qemu.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Traditional PCI config space access is achieved by writing a 32 bit
value to io port 0xcf8 to identify the bus, device, function and config
register. Port 0xcfc then contains the register in question. But if you
write the appropriate pair of magic values to 0xcf9, the machine will
reboot. Spectacular! And not standardised in any way (certainly not part
of the PCI spec), so different chipsets may have different requirements.
Booo.
In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control
Register. Bit 1 (System Reset, SRST) would normally differentiate between
soft reset and hard reset, but we ignore the difference beyond allowing
the guest to read it back.
RHBZ reference: 890459
This patch introduces the following overlap between the preexistent
"pci-conf-idx" region and the "piix3-reset-control" region just being
added. Partial output from "info mtree":
I/O
0000000000000000-000000000000ffff (prio 0, RW): io
0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx
0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control
I sanity-checked the patch by booting a RHEL-6.3 guest and found no
problems. I summoned gdb and set a breakpoint on rcr_write() in order to
gather a bit more confidence. Relevant frames of the stack:
kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1,
count=1) [kvm-all.c:1422]
cpu_outb (addr=3321, val=6 '\006') [ioport.c:289]
ioport_write (index=0, address=3321, data=6) [ioport.c:83]
ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6)
[ioport.c:212]
memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0,
width=1, data=6) [memory.c:439]
access_with_adjusted_size (addr=0, value=0x7f3f531fbac0,
size=1, access_size_min=1,
access_size_max=4,
access=0x7f3f5f6e0f90
<memory_region_write_accessor>,
opaque=0x7f3f6227b668)
[memory.c:364]
memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0,
value=0x7f3f531fbac0, size=1,
shift=0, mask=255)
[memory.c:334]
rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1)
[hw/piix_pci.c:498]
The dispatch happens in ioport_write(); "index=0" means byte-wide access:
static void ioport_write(int index, uint32_t address, uint32_t data)
{
static IOPortWriteFunc * const default_func[3] = {
default_ioport_writeb,
default_ioport_writew,
default_ioport_writel
};
IOPortWriteFunc *func = ioport_write_table[index][address];
if (!func)
func = default_func[index];
func(ioport_opaque[address], address, data);
}
The "ioport_write_table" and "ioport_opaque" arrays describe the flattened
IO port space. The first array is less interesting (it selects a thunk
function). The "ioport_opaque" array is interesting because it decides how
writing to the port is implemented ultimately.
4-byte wide access to 0xcf8 (pci-conf-idx):
(gdb) print ioport_write_table[2][0xcf8]
$1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write
$2 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f5575cb <pci_host_config_write>
1-byte wide access to 0xcf9 (piix3-reset-control):
(gdb) print ioport_write_table[0][0xcf9]
$3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write
$4 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f6b42f1 <rcr_write>
The higher priority of "piix3-reset-control" ensures that the 0xcf9
entries in ioport_write_table / ioport_opaque will always belong to it,
independently of its relative registration order versus "pci-conf-idx".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fills out support for the pci assignment API. Added:
PCIINTxRoute ich9_route_intx_pin_to_irq(void *opaque, int pirq_pin)
Add calls to pci_bus_fire_intx_routing_notifier() when routing changes
are made.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch makes rx commands consistent with specification.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In virtio-net guest driver, currently we write MAC address to
pci config space byte by byte, this means that we have an
intermediate step where mac is wrong. This patch introduced
a new control command to set MAC address, it's atomic.
VIRTIO_NET_F_CTRL_MAC_ADDR is a new feature bit for compatibility.
"mac" field will be set to read-only when VIRTIO_NET_F_CTRL_MAC_ADDR
is acked.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtio-net code makes assumption about virtqueue descriptor layout
(e.g. sg[0] is the header, sg[1] is the data buffer).
This patch makes code not rely on the layout of descriptors.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Once guest overrides virtio net primary mac,
it retains the value set until qemu exit.
This is inconsistent with standard nic behaviour.
To fix, revert the mac to the original value on reset.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add code comment to clarify the reason we set ICS with ICR:
the reason was previously undocumented and git
log confused rather than clarified the comments.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
set_bit on indicators doesn't go well on 32 bit targets:
note: expected 'long unsigned int *' but argument is of type 'uint64_t *'
Switch to bit shifts instead.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
[agraf: use 1ULL instead]
Signed-off-by: Alexander Graf <agraf@suse.de>
Changed error codes in the channel subsystem / virtio-ccw code
(-EOPNOTSUPP -> -ENOSYS, -ERESTART -> -EINPROGRESS).
This should hopefully fix building on mingw32.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Map the I/O interruption code before calling into css.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a new machine type, s390-ccw-virtio, making use of the
virtio-ccw transport to present virtio devices as channel
devices.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
s390_virtio_bus_find_mem() may return a NULL VirtIOS390Device.
If called with, e.g., args[0] == 0, this leads to a segfault.
Fix this by adding error handling as done for other hypercalls.
Present since baf0b55a9e (Implement
virtio reset).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This moves all files only used by s390 system emulation to hw/s390x.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
virtio-s390 devices are not being reset when their bus is. To fix
this, add a reset method that forwards to virtio_reset. This is
only needed because of the "strange" modeling of virtio devices;
the ->vdev link is being handled manually rather than through qdev.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a new virtio transport that uses channel commands to perform
virtio operations.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Some of the machine initialization for s390-virtio will be reused
by virtio-ccw.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Provide a mechanism for qemu to provide fully virtual subchannels to
the guest.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The current s390 machine uses the virtio console as default console,
but this doesn't mean that we always want to keep it that way for new
machines.
This patch introduces a way for a machine type to specify that it wants
the default console to be an SCLP console, which is a lot closer to what
real hardware does.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
* afaerber/qom-cpu: (37 commits)
kvm: Pass CPUState to kvm_on_sigbus_vcpu()
cpu: Unconditionalize CPUState fields
target-m68k: Use type_register() instead of type_register_static()
target-unicore32: Use type_register() instead of type_register_static()
target-openrisc: Use type_register() instead of type_register_static()
target-unicore32: Catch attempt to instantiate abstract type in cpu_init()
target-openrisc: Catch attempt to instantiate abstract type in cpu_init()
target-m68k: Catch attempt to instantiate abstract type in cpu_init()
target-arm: Catch attempt to instantiate abstract type in cpu_init()
target-alpha: Catch attempt to instantiate abstract type in cpu_init()
qom: Introduce object_class_is_abstract()
target-unicore32: Detect attempt to instantiate non-CPU type in cpu_init()
target-openrisc: Detect attempt to instantiate non-CPU type in cpu_init()
target-m68k: Detect attempt to instantiate non-CPU type in cpu_init()
target-alpha: Detect attempt to instantiate non-CPU type in cpu_init()
target-arm: Detect attempt to instantiate non-CPU type in cpu_init()
cpu: Add model resolution support to CPUClass
target-i386: Remove setting tsc-frequency from x86_def_t
target-i386: Set custom features/properties without intermediate x86_def_t
target-i386: Remove vendor_override field from CPUX86State
...
Conflicts:
tests/Makefile
Resolved simple conflict caused by lack of context in Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Paolo Bonzini (14) and others
# Via Kevin Wolf
* kwolf/for-anthony: (24 commits)
ide: Add fall through annotations
block: Create proper size file for disk mirror
ahci: Add migration support
ahci: Change data types in preparation for migration
ahci: Remove unused AHCIDevice fields
hbitmap: add assertion on hbitmap_iter_init
mirror: do nothing on zero-sized disk
block/vdi: Check for bad signature
block/vdi: Improved return values from vdi_open
block/vdi: Improve debug output for signature
block: Use error code EMEDIUMTYPE for wrong format in some block drivers
block: Add special error code for wrong format
mirror: support arbitrarily-sized iterations
mirror: support more than one in-flight AIO operation
mirror: add buf-size argument to drive-mirror
mirror: switch mirror_iteration to AIO
mirror: allow customizing the granularity
block: allow customizing the granularity of the dirty bitmap
block: return count of dirty sectors, not chunks
mirror: perform COW if the cluster size is bigger than the granularity
...
# By Lei Li (3) and others
# Via Luiz Capitulino
* luiz/queue/qmp:
QAPI: Introduce memchar-read QMP command
QAPI: Introduce memchar-write QMP command
qemu-char: Add new char backend CirMemCharDriver
docs: document virtio-balloon stats
balloon: re-enable balloon stats
balloon: drop old stats code & API
block: Monitor command commit neglects to report some errors
SysBusDeviceClass' initfn merely calls SysBusDeviceClass::init, so we
can already hook up our own realizefn overwriting this behavior.
A symmetric unrealizefn is not necessary, knowing that the child's
unrealizefn is still no-op, too. Avoids ripping it out again when
recursive realization at DeviceState-level is implemented.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
This keeps compatibility on machine-types pc-1.2 and older, and prints a
warning in case the requested configuration won't get the correct
topology.
I couldn't think of a better way to warn about broken topology when in
compat mode other than using error_report(). The warning message will
probably be buried in a log file somewhere, but it's better than
nothing.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This changes FW_CFG_MAX_CPUS and FW_CFG_NUMA to use apic_id_for_cpu(),
so the NUMA table can be based on the APIC IDs, instead of CPU index
(SeaBIOS knows nothing about CPU indexes, just APIC IDs).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
PC will not use max_cpus for that field, so move it outside the common
code so it can use a different value on PC.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Currently, the pc-1.4 machine init function enables PV EOI and then
calls the pc-1.2 machine init function. The problem with this approach
is that now we can't enable any additional compatibility code inside the
pc-1.2 init function because it would end up enabling the compatibility
behavior on pc-1.3 and pc-1.4 as well.
This reverses the logic so that the pc-1.2 machine init function will
disable PV EOI, and then call the pc-1.4 machine init function.
This way we can change older machine-types to enable compatibility
behavior, and the newer machine-types (pc-1.3, pc-q35-1.4 and
pc-i440fx-1.4) would just use the default behavior.
(This means that one nice side-effect of this change is that pc-q35-1.4
will get PV EOI enabled by default, too)
It would be interesting to eventually change pc_init_pci_no_kvmclock()
and pc_init_isa() to reuse pc_init_pci_1_2() as well (so we don't need
to duplicate compatibility code on those two functions). But this will
be probably much easier to do after we create a PCInitArgs struct for
the PC initialization arguments, and/or after we use global-properties
to implement the compatibility modes present in pc_init_pci_1_2().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Default to moving back to the IDLE state after the COLLECTING_DATA
state. For a well behaved guest this patch has no consequence, but
A bad guest could crash QEMU by using one of the erase commands
followed by a longer than 5 byte argument (undefined behaviour).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Software services a received packet by clearing the CTRL_S bit in the RX_CTRLn
register. If this bit is cleared, flush any packets queued for the device.
Reported-by: John Williams <john.williams@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The eth_can_rx() function only checks the first buffers status ("ping"). The
controller should be able to receive into "pong" when ping-pong is enabled.
Checks the active buffer (either "ping" or "pong") when determining can_rx()
rather than just testing "ping".
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf:
PPC: e500: Select MPIC v4.2 on ppce500 platform
PPC: e500: fix mpic_iack address
openpic: add basic support for MPIC v4.2
openpic: fix timer address decoding
openpic: fix remaining issues from idr-to-destmask conversion
pseries: Adjust default VIO address allocations to play better with libvirt
pseries: Improve handling of multiple PCI host bridges
target-ppc: Give a meaningful error if too many threads are specified
cuda: Move ADB bus into CUDA state
adb: QOM'ify ADB devices
adb: QOM'ify Apple Desktop Bus
cuda: QOM'ify CUDA
ide/macio: QOM'ify MacIO IDE
mac_nvram: QOM'ify MacIO NVRAM
mac_nvram: Mark as Big Endian
mac_nvram: Clean up public API
macio: Split MacIO in two
macio: Delay qdev init until all fields are initialized
macio: QOM'ify some more
ppc: Move Mac machines to hw/ppc/
This is a follow up for several attempts to fix this issue.
Previous incarnations:
1. http://thread.gmane.org/gmane.linux.ubuntu.bugs.general/3156089https://bugs.launchpad.net/bugs/918791
"qemu-kvm dies when using vmvga driver and unity in the guest" bug.
Fix by Serge Hallyn:
https://launchpadlibrarian.net/94916786/qemu-vmware.debdiff
This fix is incomplete, since it does not check width and height
for being negative. Serge weren't sure if that's the right place
to fix it, maybe the fix should be up the stack somewhere.
2. http://thread.gmane.org/gmane.comp.emulators.qemu/166064
by Marek Vasut: "vmware_vga: Redraw only visible area"
This one adds the (incomplete) check to vmsvga_update_rect_delayed(),
the routine just queues the rect updating but does no interesting
stuff. It is also incomplete in the same way as patch by Serge,
but also does not touch width&height at all after adjusting x&y,
which is wrong.
As far as I can see, when processing guest requests, the device
places them into a queue (vmsvga_update_rect_delayed()) and
processes this queue in different place/time, namely, in
vmsvga_update_rect(). Sometimes, vmsvga_update_rect() is
called directly, without placing the request to the gueue.
This is the place this patch changes, which is the last
(deepest) in the stack. I'm not sure if this is the right
place still, since it is possible we have some queue optimization
(or may have in the future) which will be upset by negative/wrong
values here, so maybe we should check for validity of input
right when receiving request from the guest (and maybe even
use unsigned types there). But I don't know the protocol
and implementation enough to have a definitive answer.
But since vmsvga_update_rect() has other sanity checks already,
I'm adding the missing ones there as well.
Cc'ing BALATON Zoltan and Andrzej Zaborowski who shows in `git blame'
output and may know something in this area.
If this patch is accepted, it should be applied to all active
stable branches (at least since 1.1, maybe even before), with
minor context change (ds_get_*(s->vga.ds) => s->*). I'm not
Cc'ing -stable yet, will do it explicitly once the patch is
accepted.
BTW, these checks use fprintf(stderr) -- it should be converted
to something more appropriate, since stderr will most likely
disappear somewhere.
Cc: Marek Vasut <marex@denx.de>
CC: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Align the device tree blob to a 4KB boundary, not to QEMU's
idea of a page boundary -- the latter is the smallest possible
page size for the architecture, which on ARM is 1KB.
The documentation for Linux does not impose separation
or alignment requirements on the device tree blob, but
in practice some kernels will happily trash the entire
page the initrd ends in after they have finished uncompressing
the initrd. So 4KB-align the DTB to ensure it does not get
trampled by these kernels.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
read_splashfile() passes the address of an int variable as size_t *
parameter to g_file_get_contents(), with a cast to gag the compiler.
No problem on machines where sizeof(size_t) == sizeof(int).
Happens to work on my x86_64 box (64 bit little endian): the least
significant 32 bits of the file size end up in the right place
(caller's variable file_size), and the most significant 32 bits
clobber a place that gets assigned to before its next use (caller's
variable file_type).
I'd expect it to break on a 64 bit big-endian box.
Fix up the variable types and drop the problematic cast.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Explicitly mark the fallthroughs as intentional in the code
pattern where we gradually increment an index before falling
into the code to read/write that array entry:
case THINGY_3: idx++;
case THINGY_2: idx++;
case THINGY_1: idx++;
case THINGY_0: return s->thingy[idx];
This makes static analysers happy.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add an explicit 'return' statement to a case in smc91c111_readb
rather than relying on fallthrough to the following case's
return statement, for code clarity and to placate static analysers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Mark the deliberate fallthrough where we treat the case of
an attempt to read flash when it is an unknown command
state as if it were a normal read.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Explicitly mark the fallthroughs as intentional in the code
pattern where we gradually increment an index before falling
into the code to read/write that array entry:
case THINGY_3: idx++;
case THINGY_2: idx++;
case THINGY_1: idx++;
case THINGY_0: return s->thingy[idx];
This makes static analysers happy.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Explicitly mark cases where we are deliberately falling
through to the following code. In one case we insert a
'break' instead of falling through to a 'break', as this
seems slightly clearer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add some break statements that were accidentally omitted
from some cases of arm_sysctl_write(). The omission was
harmless because in both cases the following case did
an immediate break, but adding the breaks explicitly
placates static analysers and avoids weird behaviour if
the following register is ever implemented as something
other than a no-op.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
