The v7 ARM ARM specifies that the Large Physical Address
Extension requires implementation of the Multiprocessing
Extensions, so make our LPAE feature imply V7MP rather
than specifying both in the A15 CPU initfn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1371127899-10364-1-git-send-email-peter.maydell@linaro.org
Use the tuple list of cp registers for syncing KVM state to QEMU,
rather than only syncing a very minimal set by hand.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since the ARM KVM API doesn't include a "reset this VCPU"
ioctl, we have to capture the initial values of every
register it knows about so that we can reset the VCPU
by feeding those values back again.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When using KVM, use the kernel's initial state to set up the
cpreg list, and sync to and from the kernel when doing
migration.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the TCG ARM target to using an (index,value) list for migrating
coprocessors. The primary benefit of the (index,value) list is for
passing state between KVM and QEMU, but it works for TCG-to-TCG
migration as well and is a useful self-contained first step.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark up coprocessor register definitions to add raw access
functions or mark the register as non-migratable where necessary.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For reading and writing register values from the kernel for KVM,
we need to provide accessor functions which are guaranteed to succeed
and don't impose access checks, mask out unwritable bits, etc.
Define new fields raw_readfn and raw_writefn for this purpose;
these only need to be provided if there is a readfn or writefn
already and it is not suitable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Relax the "is this a valid ARMCPRegInfo type value?" check to permit
"special" cpregs to have flags other than ARM_CP_SPECIAL set. At
the moment none of the other flags are relevant for special regs,
but the migration related flag we're about to introduce can apply
here too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# By Michael Tokarev (4) and others
# Via Michael Tokarev
* mjt/trivial-patches-next: (26 commits)
piix: fix some printf errors when debug is enabled
cputlb: fix debug logs
create qemu_openpty_raw() helper function and move it to a separate file
main-loop: do not include slirp/slirp.h, use libslirp.h instead
libcacard/vscclient: fix leakage of socket on error paths
linux-headers: Update to v3.10-rc5
KVM: PPC: Add dummy kvm_arch_init_irq_routing()
KVM: S390: Add dummy kvm_arch_init_irq_routing()
KVM: ARM: Add dummy kvm_arch_init_irq_routing()
ivshmem: add missing error exit(2)
hw/xen: Use g_free instead of free and fix potential memory leaks
target-sparc: Replace free by g_free
hw/scsi: Don't increment a boolean value
device tree: Fix cppcheck warning
Makefile: Install qemu-img and qemu-nbd man pages only if built
Unbreak -no-quit for GTK, validate SDL options
gtk: implement -full-screen
char/serial: serial_ioport_write: Factor out common code
char/serial: Use generic Fifo8
char/serial: cosmetic fixes.
...
Message-id: 1371207042-17980-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The common KVM code insists on calling kvm_arch_init_irq_routing()
as soon as it sees kernel header support for it (regardless of whether
QEMU supports it). Provide a dummy function to satisfy this.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The rfe instruction has been broken since patch
5a839c0d54 because of a typo.
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix these warnings from cppcheck:
hw/display/cirrus_vga.c:2603:
hw/sd/sd.c:348:
hw/timer/exynos4210_mct.c:1033:
target-arm/translate.c:9886:
target-s390x/mem_helper.c:518:
target-unicore32/translate.c:1936:
style: Consecutive return, break, continue, goto or throw statements are unnecessary.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
All the uses of the gen_{ld,st}* functions are gone now, so remove
the functions themselves.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
gen_ld64() and gen_st64() are used only in one place, so just
expand them out.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
TCGv changes size depending on the compile time value of
TARGET_LONG_BITS. This is useful for generating code for MIPS style
"instructions are the same but the register width changes" CPUs, and
also for the generic bits of QEMU which operate on "width of a
virtual address" values, but mostly in the ARM target code we were
using it purely as a shorthand for "any 32 bit value".
This needs to change in preparation for AArch64 support, since an
AArch64-capable v8 core will have 64 bit virtual addresses but still
use 32 bit values for the 32 bit instruction set.
This patch mechanically converts all the occurrences of TCGv,
tcg_temp_new(), tcg_temp_free(), tcg_temp_local_new() and
TCGV_UNUSED() to their explicitly 32 bit counterparts. This is
correct for everything except the arguments to tcg_gen_qemu_{ld,st}*,
which really do need to be TCGv and so will require a 32-to-64
conversion when building the 32 bit code for AArch64. Those changes
will be in a separate patch for easier review.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
kvm_vcpu_ioctl() returns -ETHING on error, not ETHING -- correct
an incorrect check in kvm_arch_init_vcpu(). This would not have
had any significant ill-effects -- we would just have propagated
the less useful ENOENT up to the caller rather than the more
accurate EINVAL in the unlikely case that the kernel didn't
have VFP-D32 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the helper functions to save and restore the FPSCR, so that
we correctly propagate rounding mode and flushing behaviour into
the float_status fields. This also allows us to stop saving the
vector length/stride fields separately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A number of CPU state fields were accidentally omitted from
our migration state: some OMAP specific cp15 registers, and
some related to state for load/store exclusive insns. Add them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Port the ARM CPU save/load code to use VMState. Some state is
saved in a slightly different order to simplify things -- for
example arrays are saved one after the other rather than 'striped',
and we always save all 32 VFP registers even if the CPU happens
to only have 16.
Use one subsection for each feature. This means that we don't need to
bump the version field each time that a new feature gets introduced.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: fixed conflicts, updated to use cpu_class_set_vmsd(), updated
with new/removed fields since original patch, changed to use custom
VMStateInfo for cpsr rather than presave/postload hooks, corrected
subsection names so vmload doesn't fail]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since patch
81465888c5
target-arm: factor out handling of SRS instruction
the ARM mode SRS instruction has not worked in QEMU.
The problem is a missing return directive that was removed in the
refactoring, so after decoding the instruction, qemu would fall through
to generate an UNDEF exception for an illegal instruction.
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The recent rearrangement of include files had some minor errors:
devices.h is not ARM specific and should not be in arm/
arm.h should be in arm/
Move these two headers to correct this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable ARMCPUInfo to specify a custom class_init functions.
Introduce arm_v7m_class_init() and use it for "cortex-m3" model.
Instead of forwarding from arm_cpu_do_interrupt() to do_interrupt_v7m(),
override CPUClass::do_interrupt with arm_v7m_cpu_do_interrupt()
in arm_v7m_class_init().
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This removes a global per-target function and thus takes us one step
closer to compiling multiple targets into one executable.
It will also allow to override the interrupt handling for certain CPU
families.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
When using an in-kernel GIC with KVM, we need to tell the kernel where
the GIC's memory mapped registers live. Do this by registering a
MemoryListener which tracks where the board model maps the A15's
private peripherals, so we can finish the GIC initialisation
when the GIC is actually mapped.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for saving and restoring VFP register state from the
kernel. This includes a check that the KVM-created CPU has full
VFP support (as the TCG Cortex-A15 model always does), since for
the moment ARM QEMU doesn't have any way to tweak optional features
on created CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Add basic support for KVM on ARM architecture.
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
[PMM: Minor tweaks and code cleanup, switch to ONE_REG]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the CPUARMState* argument from bank_number(), since we only
use it for passing to cpu_abort(). Use hw_error() instead.
This avoids propagating further interfaces using env pointers.
In the long term this function's callers need auditing to fix
problems where badly behaved guests can pass invalid bank numbers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
M profile cores do not have the RFE or SRS instructions, so
correctly UNDEF these insn patterns on those cores.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Factor out the handling of the SRS instruction rather than
duplicating it between the Thumb and ARM decoders. This in
passing fixes two bugs in the Thumb decoder's SRS handling
which didn't exist in the ARM decoder:
* (LP:1079080) storing CPSR rather than SPSR (fixed in the
ARM decoder in commit c67b6b71 in 2009)
* failing to free the 'addr' TCG temp in the writeback case
Reported-by: Cesson Vincent <vcesson@stmi.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The gen_icount_start/end functions are now somewhat misnamed since they
are useful for generic "start/end of TB" code, used for more than just
icount. Rename them to gen_tb_start/end.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introduce ENV_OFFSET macros which can be used in non-target-specific
code that needs to generate TCG instructions which reference CPUState
fields given the cpu_env register that TCG targets set up with a
pointer to the CPUArchState struct.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
While T0+~T1+CF = T0-T1+CF-1 is true for the low 32-bits,
it does not produce the correct carry-out to bit 33. Do
exactly what the manual says.
Using the ~T1 makes the add and subtract code paths nearly
identical, so have sbc_CC use adc_CC.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
commits 49b4c31efc and
2de68a4900 reworked the implementation of adc_CC
and sub_CC. The new implementations (on the TCG_TARGET_HAS_add2_i32 code path)
are incorrect. The new logic is:
CF:NF = 0:A +/- 0:CF
CF:NF = CF:A +/- 0:B
The lower 32 bits of the intermediate result stored in NF needs to be passes
into the second addition in place of A (s/CF:A/CF:NF):
CF:NF = 0:A +/- 0:CF
CF:NF = CF:NF +/- 0:B
This patch fixes the issue.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use sub2 if available, otherwise use 64-bit arithmetic.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use add2 if available, otherwise use 64-bit arithmetic.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The target-specific ENV_GET_CPU() macros have allowed us to navigate
from CPUArchState to CPUState. The reverse direction was not supported.
Avoid introducing CPU_GET_ENV() macros by initializing an untyped
pointer that is initialized in derived instance_init functions.
The field may not be called "env" due to it being poisoned.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
