This patch fixes a potential small window that the DMA page table might
be incomplete or invalid when the guest sends domain/context
invalidations to a device. This can cause random DMA errors for
assigned devices.
This is a major change to the VT-d shadow page walking logic. It
includes but is not limited to:
- For each VTDAddressSpace, now we maintain what IOVA ranges we have
mapped and what we have not. With that information, now we only send
MAP or UNMAP when necessary. Say, we don't send MAP notifies if we
know we have already mapped the range, meanwhile we don't send UNMAP
notifies if we know we never mapped the range at all.
- Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call
in any places to resync the shadow page table for a device.
- When we receive domain/context invalidation, we should not really run
the replay logic, instead we use the new sync shadow page table API to
resync the whole shadow page table without unmapping the whole
region. After this change, we'll only do the page walk once for each
domain invalidations (before this, it can be multiple, depending on
number of notifiers per address space).
While at it, the page walking logic is also refactored to be simpler.
CC: QEMU Stable <qemu-stable@nongnu.org>
Reported-by: Jintack Lim <jintack@cs.columbia.edu>
Tested-by: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch only modifies the trace points.
Previously we were tracing page walk levels. They are redundant since
we have page mask (size) already. Now we trace something much more
useful which is the domain ID of the page walking. That can be very
useful when we trace more than one devices on the same system, so that
we can know which map is for which domain.
CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We pass in the VTDAddressSpace too. It'll be used in the follow up
patches.
CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
During the recursive page walking of IOVA page tables, some stack
variables are constant variables and never changed during the whole page
walking procedure. Isolate them into a struct so that we don't need to
pass those contants down the stack every time and multiple times.
CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For UNMAP-only IOMMU notifiers, we don't need to walk the page tables.
Fasten that procedure by skipping the page table walk. That should
boost performance for UNMAP-only notifiers like vhost.
CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SECURITY IMPLICATION: this patch fixes a potential race when multiple
threads access the IOMMU IOTLB cache.
Add a per-iommu big lock to protect IOMMU status. Currently the only
thing to be protected is the IOTLB/context cache, since that can be
accessed even without BQL, e.g., in IO dataplane.
Note that we don't need to protect device page tables since that's fully
controlled by the guest kernel. However there is still possibility that
malicious drivers will program the device to not obey the rule. In that
case QEMU can't really do anything useful, instead the guest itself will
be responsible for all uncertainties.
CC: QEMU Stable <qemu-stable@nongnu.org>
Reported-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
That is not really necessary. Removing that node struct and put the
list entry directly into VTDAddressSpace. It simplfies the code a lot.
Since at it, rename the old notifiers_list into vtd_as_with_notifiers.
CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SECURITY IMPLICATION: without this patch, any guest with both assigned
device and a vIOMMU might encounter stale IO page mappings even if guest
has already unmapped the page, which may lead to guest memory
corruption. The stale mappings will only be limited to the guest's own
memory range, so it should not affect the host memory or other guests on
the host.
During IOVA page table walking, there is a special case when the PSI
covers one whole PDE (Page Directory Entry, which contains 512 Page
Table Entries) or more. In the past, we skip that entry and we don't
notify the IOMMU notifiers. This is not correct. We should send UNMAP
notification to registered UNMAP notifiers in this case.
For UNMAP only notifiers, this might cause IOTLBs cached in the devices
even if they were already invalid. For MAP/UNMAP notifiers like
vfio-pci, this will cause stale page mappings.
This special case doesn't trigger often, but it is very easy to be
triggered by nested device assignments, since in that case we'll
possibly map the whole L2 guest RAM region into the device's IOVA
address space (several GBs at least), which is far bigger than normal
kernel driver usages of the device (tens of MBs normally).
Without this patch applied to L1 QEMU, nested device assignment to L2
guests will dump some errors like:
qemu-system-x86_64: VFIO_MAP_DMA: -17
qemu-system-x86_64: vfio_dma_map(0x557305420c30, 0xad000, 0x1000,
0x7f89a920d000) = -17 (File exists)
CC: QEMU Stable <qemu-stable@nongnu.org>
Acked-by: Jason Wang <jasowang@redhat.com>
[peterx: rewrite the commit message]
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Fixes: commit da6789c27c ("nvdimm: add a macro for property "label-size"")
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Cc: Haozhong Zhang <haozhong.zhang@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The warning is
hw/virtio/vhost-user.c:1319:26: error: suggest braces
around initialization of subobject [-Werror,-Wmissing-braces]
VhostUserMsg msg = { 0 };
^
{}
While the original code is correct, and technically exactly correct
as per ISO C89, both GCC and Clang support plain empty set of braces
as an extension.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use qemu_set_nonblock rather than a simple fcntl; cleaner
and I have no reason to change other flags.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces the support for setting memory region
based host notifiers for virtio device. This is helpful when
using a hardware accelerator for a virtio device, because
hardware heavily depends on the notification, this will allow
the guest driver in the VM to notify the hardware directly.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Switch to the header we imported from Linux,
this allows us to drop a hack in kvm_i386.h.
More code will be dropped in the next patch.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add some trace points for IOTLB translation for vhost. After vhost-user
is setup, the only IO path that QEMU will participate should be the
IOMMU translation, so it'll be good we can track this with explicit
timestamps when needed to see how long time we take to do the
translation, and whether there's anything stuck inside. It might be
useful for triaging vhost-user problems.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu should read and report hugetlb page allocation
counts exported in the following kernel patch:
commit 4c3ca37c4a4394978fd0f005625f6064ed2b9a64
Author: Jonathan Helman <jonathan.helman@oracle.com>
Date: Mon Mar 19 11:00:35 2018 -0700
virtio_balloon: export hugetlb page allocation counts
Export the number of successful and failed hugetlb page
allocations via the virtio balloon driver. These 2 counts
come directly from the vm_events HTLB_BUDDY_PGALLOC and
HTLB_BUDDY_PGALLOC_FAIL.
Signed-off-by: Jonathan Helman <jonathan.helman@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
During smram region initialization some addresses are hardcoded,
replace them with macro to be more clear to readers.
Previous patch forgets about one value and exceeds the line
limit of 90 characters. The v2 breaks a few long lines
Signed-off-by: Zihan Yang <whois.zihan.yang@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Certain functions in xen_disk are called with a pointer to xendev
(struct XenDevice *). They then use container_of() to acces the surrounding
blkdev (struct XenBlkDev) but then in various places use &blkdev->xendev
when use of the original xendev pointer is shorter to express and clearly
equivalent.
This patch is a purely cosmetic patch which makes sure there is a xendev
pointer on stack for any function where the pointer is need on multiple
occasions modified those functions to use it consistently.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Since xen_disk now always copies data to and from a guest there is no need
to maintain a vector entry corresponding to every page of a request.
This means there is less per-request state to maintain so the ioreq
structure can shrink significantly.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
There is no longer any use of this flag outside of the xen_backend code.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Now that the (native or emulated) xen_be_copy_grant_refs() helper is
always available, the xen_disk code can be significantly simplified by
removing direct use of grant map and unmap operations.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Not all Xen environments support the xengnttab_grant_copy() operation.
E.g. where the OS is FreeBSD or Xen is older than 4.8.0.
This patch introduces an emulation of that operation using
xengnttab_map_domain_grant_refs() and memcpy() for those environments.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Now that helpers are available in xen_backend, use them throughout all
Xen PV backends.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Now that helpers are present in xen_backend, this patch removes open-coded
calls to libxengnttab from the xen_disk code.
This patch also fixes one whitspace error in the assignment of the
XenDevOps initialise method.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
This patch adds grant table helper functions to the xen_backend code to
localize error reporting and use of xen_domid.
The patch also defers the call to xengnttab_open() until just before the
initialise method in XenDevOps is invoked. This method is responsible for
mapping the shared ring. No prior method requires access to the grant table.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Currently the xen_disk source has to carry #ifdef exclusions to compile
against Xen older then 4.8. This is a bit messy so this patch lifts the
definition of struct xengnttab_grant_copy_segment and adds it into the
pre-4.8 compat area in xen_common.h, which allows xen_disk to be cleaned
up.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
When compiling with NVRAM_PRINTF enabled, gcc currently bails out with:
CC hw/timer/m48t59.o
CC hw/timer/m48t59-isa.o
hw/timer/m48t59.c: In function ‘NVRAM_writeb’:
hw/timer/m48t59.c:460:5: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘hwaddr’ [-Werror=format=]
NVRAM_PRINTF("%s: 0x%08x => 0x%08x\n", __func__, addr, val);
^
hw/timer/m48t59.c:460:5: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘uint64_t’ [-Werror=format=]
hw/timer/m48t59.c: In function ‘NVRAM_readb’:
hw/timer/m48t59.c:492:5: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘hwaddr’ [-Werror=format=]
NVRAM_PRINTF("%s: 0x%08x <= 0x%08x\n", __func__, addr, retval);
Fix it by using the correct format strings and while we're at it,
also change the definition of NVRAM_PRINTF so that this can not
bit-rot so easily again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The ALLWINNER_AHCI() macro is only used in ahci-allwinner.c.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The trace events all use a uint64_t data type, so should be using the
corresponding PRIx64 format, not HWADDR_PRIx which is intended for use
with the 'hwaddr' type.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The code is sufficiently substantial that it improves code readability
to put it in a new function called by xen_hvm_init() rather than having
it inline.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
The full size of the BAR is stored in the lower PCIIORegion.size. The
upper PCIIORegion.size is 0. Calculate the size of the upper half
correctly from the lower half otherwise the size read by the guest will
be incorrect.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Commit 99605175c (xen-pt: Fix PCI devices re-attach failed) introduced
a subtle bug. As soon as the guest switches off Bus Mastering on the
device it immediately causes all the BARs be unmapped due to the DMA
address space of the device being changed. This is undesired behavior
because the guest may try to communicate with the device after that
which triggers the following errors in the logs:
[00:05.0] xen_pt_bar_read: Error: Should not read BAR through QEMU. @0x0000000000000200
[00:05.0] xen_pt_bar_write: Error: Should not write BAR through QEMU. @0x0000000000000200
The issue that the original patch tried to workaround (uneven number of
region_add/del calls on device attach/detach) was fixed in d25836cafd
(memory: do explicit cleanup when remove listeners).
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
This should help to avoid problems with accessing the device after
migration/resume without PV drivers by migrating its PCI configuration
space state. Without an explicitly defined state record it resets
every time a VM migrates which confuses the OS and makes every
access to xen-pvdevice MMIO region to fail. PV tools enable some
logic to save and restore PCI configuration state from within the VM
every time it migrates which basically hides the issue.
Older systems will acquire the new record when migrated which should
not change their state for worse.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Coverity points out that this can overflow if n > 31,
because it's only doing 32-bit arithmetic. Let's use 1ULL instead
of 1. Also the formulae used to compute n can be replaced by
the level_shift() macro.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1526493784-25328-3-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity complains about use of uninitialized Evt struct.
The EVT_SET_TYPE and similar setters use deposit32() on fields
in the struct, so they read the uninitialized existing values.
In cases where we don't set all the fields in the event struct
we'll end up leaking random uninitialized data from QEMU's
stack into the guest.
Initializing the struct with "Evt evt = {};" ought to satisfy
Coverity and fix the data leak.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1526493784-25328-2-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ZynqMP contains two instances of a generic DMA, the GDMA, located in the
FPD (full power domain), and the ADMA, located in LPD (low power domain). This
patch adds these two DMAs to the ZynqMP board.
Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20180503214201.29082-3-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a model of the generic DMA found on Xilinx ZynqMP.
Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20180503214201.29082-2-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current code was not correctly handling 64 B (Max USB 1.1 payload size)
packets and therefore preventing some of the messages from smart card to
pass through to the guest.
If the smart card in host responded with 34 B of data in APDU layer, the
CCID headers added up to 64 B. The packet was send, but not correctly
committed per USB specification (8.5.3.2 Variable-length Data Stage):
> When all of the data structure is returned to the host, the function
> should indicate that the Data stage is ended by returning a packet
> that is shorter than the MaxPacketSize for the pipe. If the data
> structure is an exact multiple of wMaxPacketSize for the pipe, the
> function will return a zero-length packet to indicate the end of the
> Data stage.
This lead the guest applications to timeout while waiting for the rest
of data (the emulation layer is answering with NAK until the timeout).
This patch is checking the current maximum packet size and if the
payload of this size is detected, the message buffer is not yet released.
With the next call, the empty buffer is sent and the message buffer
is finally released.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Message-id: 20180516115544.3897-2-jjelen@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since cc847bfd16, CCID card-passthru
fails to intialize, because it changed a debug line to an error,
probably by mistake. Change it back to a DPRINTF debug.
(solves Boxes creating VM with smartcard passthru failing to start)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180515153039.27514-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
x_keymap.o is common to the SDL and GTK+ modules, and it causes the
QEMU binary to link to the X11 libraries. Add it separately to the
modules to keep the main QEMU binary smaller.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1526560782-18732-1-git-send-email-pbonzini@redhat.com
[ kraxel: fix lm32 target build (milkymist-tmu2) ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* KnightsMill CPU model
* CLDEMOTE(Demote Cache Line) cpu feature
* pc-i440fx-2.13 and pc-q35-2.13 machine-types
* Add model-specific cache information to EPYC CPU model
-----BEGIN PGP SIGNATURE-----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=uP+F
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging
x86 queue, 2018-05-15
* KnightsMill CPU model
* CLDEMOTE(Demote Cache Line) cpu feature
* pc-i440fx-2.13 and pc-q35-2.13 machine-types
* Add model-specific cache information to EPYC CPU model
# gpg: Signature made Tue 15 May 2018 22:53:12 BST
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-next-pull-request:
i386: Add new property to control cache info
pc: add 2.13 machine types
i386: Initialize cache information for EPYC family processors
i386: Add cache information in X86CPUDefinition
i386: Helpers to encode cache information consistently
x86/cpu: Enable CLDEMOTE(Demote Cache Line) cpu feature
i386: add KnightsMill cpu model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Per the Physical Layer Simplified Spec. "4.3.10.4 Switch Function Status":
The block length is predefined to 512 bits
and "4.10.2 SD Status":
The SD Status contains status bits that are related to the SD Memory Card
proprietary features and may be used for future application-specific usage.
The size of the SD Status is one data block of 512 bit. The content of this
register is transmitted to the Host over the DAT bus along with a 16-bit CRC.
Thus the 16-bit CRC goes at offset 64.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180509060104.4458-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes an issue by adding bounds checking to multi-byte packets
where the PS/2 mouse data stream may become corrupted due to data being
discarded when the PS/2 ringbuffer is full.
Interrupts for Multi-byte responses are postponed until the final byte
has been queued.
These changes fix a bug where windows guests drop the mouse device
entirely requring the guest to be restarted.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-Id: <20180507150310.2FEA0381924@moya.office.hostfission.com>
[ kraxel: codestyle fixes ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows guest's to correctly reinitialize and identify the mouse
should the guest decide to re-scan or reset during mouse input events.
When the guest sends the "Identify" command, due to the PC's hardware
architecutre it is impossible to reliably determine the response from
the command amongst other streaming data, such as mouse or keyboard
events. Standard practice is for the guest to disable the device and
then issue the identify command, so this must be obeyed.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-Id: <20180507150303.7486B381924@moya.office.hostfission.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Calling pause_all_vcpus()/resume_all_vcpus() from a VCPU thread might
not be the best idea. As pause_all_vcpus() temporarily drops the qemu
mutex, two parallel calls to pause_all_vcpus() can be active at a time,
resulting in a deadlock. (either by two VCPUs or by the main thread and a
VCPU)
Let's handle it via the main loop instead, as suggested by Paolo. If we
would have two parallel reset requests by two different VCPUs at the
same time, the last one would win.
We use the existing ipl device to handle it. The nice side effect is
that we can get rid of reipl_requested.
This change implies that all reset handling now goes via the common
path, so "no-reboot" handling is now active for all kinds of reboots.
Let's execute any CPU initialization code on the target CPU using
run_on_cpu.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180424101859.10239-1-david@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Thomas reported that the subchannel for a 3270 device that ended up
in a broken state (status pending even though not enabled) did not
get out of that state even after a reboot (which involves a subsytem
reset). The reason for this is that the 3270 device did not define
a reset handler.
Let's fix this by introducing a base reset handler (set up for all
ccw devices) that resets the subchannel and have virtio-ccw call
its virtio-specific reset procedure in addition to that.
CC: qemu-stable@nongnu.org
Reported-by: Thomas Huth <thuth@redhat.com>
Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
All the different virtio ccw devices use the same reset handler,
so let's move setting it into the base virtio ccw device class.
CC: qemu-stable@nongnu.org
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The 3270 code will try to post an attention interrupt when the
3270 emulator (e.g. x3270) attaches. If the guest has not yet
enabled the subchannel for the 3270 device, we will present a spurious
cc 1 (status pending) when it uses msch on it later on, e.g. when
trying to enable the subchannel.
To fix this, just don't do anything in css_conditional_io_interrupt()
if the subchannel is not enabled. The 3270 code will work fine with
that, and the other user of this function (virtio-ccw) never
attempts to post an interrupt for a disabled device to begin with.
CC: qemu-stable@nongnu.org
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJa+UAZAAoJEO8Ells5jWIRTJIIAIcpNROupxHEfcAQKU7lIqys
qx/FxKp+lknzzQMwUfmZwT3PuBD+tWuE7ugXgzjVulvE11F+Z3QBPTDBtOObaMa1
qpgIF3zzrNxtuWMc/72Q8/wEE1wtBUo+WTAGw9Xp1dVomYOOsg1wa7dsKdZhRfz7
nIwDW2ftw3/mx+uTW2/a163v+IDDL9L+HOLibQHWUxOMM39ASchiqAXLF4mfhpwH
xr0OPd7wtcmrDsD/CLbdkGCJ/+vsXnY8pzNmy1RjJuDpWpqlgYpJJPtLBfXBo9VA
91sz5+KryzjpXXzKcQuhiU020O1dIKIe3PWqK6z0x0UjtZ1Yox5adZ3eFomHHwU=
=bIws
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 14 May 2018 08:51:53 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net: Get rid of 'vlan' terminology and use 'hub' instead in the doc files
net: Get rid of 'vlan' terminology and use 'hub' instead in the source files
net: Remove the deprecated "vlan" parameter
net: Fix memory leak in net_param_nic()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* dtc configure fixes
* MemoryRegionCache second try
* Deprecated option removal
* add support for Hyper-V reenlightenment MSRs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJa9Y2qAAoJEL/70l94x66Df8EIAI4pi+zf1mTlH0Koi+oqOg+d
geBC6N9IA+n1p90XERnPbuiT19NjON2R1Z907SbzDkijxdNRoYUoQf7Z+ZBTENjn
dYsVvgLYzajGLWWtJetPPaNFAqeF2z8B3lbVQnGVLzH5pQQ2NS1NJsvXQA2LslLs
2ll1CJ2EEBhayoBSbHK+0cY85f+DUgK/T1imIV2T/rwcef9Rw218nvPfGhPBSoL6
tI2xIOxz8bBOvZNg2wdxpaoPuDipBFu6koVVbaGSgXORg8k5CEcKNxInztufdELW
KZK5ORa3T0uqu5T/GGPAfm/NbYVQ4aTB5mddshsXtKbBhnbSfRYvpVsR4kQB/Hc=
=oC1r
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Don't silently truncate extremely long words in the command line
* dtc configure fixes
* MemoryRegionCache second try
* Deprecated option removal
* add support for Hyper-V reenlightenment MSRs
# gpg: Signature made Fri 11 May 2018 13:33:46 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (29 commits)
rename included C files to foo.inc.c, remove osdep.h
pc-dimm: fix error messages if no slots were defined
build: Silence dtc directory creation
shippable: Remove Debian 8 libfdt kludge
configure: Display if libfdt is from system or git
configure: Really use local libfdt if the system one is too old
i386/kvm: add support for Hyper-V reenlightenment MSRs
qemu-doc: provide details of supported build platforms
qemu-options: Remove deprecated -no-kvm-irqchip
qemu-options: Remove deprecated -no-kvm-pit-reinjection
qemu-options: Bail out on unsupported options instead of silently ignoring them
qemu-options: Remove remainders of the -tdf option
qemu-options: Mark -virtioconsole as deprecated
target/i386: sev: fix memory leaks
opts: don't silently truncate long option values
opts: don't silently truncate long parameter keys
accel: use g_strsplit for parsing accelerator names
update-linux-headers: drop hyperv.h
qemu-thread: always keep the posix wrapper layer
exec: reintroduce MemoryRegion caching
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's been marked as deprecated since QEMU v2.9.0, so that should have
been enough time for everybody to either just drop unnecessary "vlan=0"
parameters, to switch to the modern -device + -netdev syntax for connecting
guest NICs with host network backends, or to switch to the "hubport" netdev
in case hubs are really wanted instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* hw/arm/iotkit.c: fix minor memory leak
* softfloat: fix wrong-exception-flags bug for multiply-add corner case
* arm: isolate and clean up DTB generation
* implement Arm v8.1-Atomics extension
* Fix some bugs and missing instructions in the v8.2-FP16 extension
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uXY+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180510' into staging
target-arm queue:
* hw/arm/iotkit.c: fix minor memory leak
* softfloat: fix wrong-exception-flags bug for multiply-add corner case
* arm: isolate and clean up DTB generation
* implement Arm v8.1-Atomics extension
* Fix some bugs and missing instructions in the v8.2-FP16 extension
# gpg: Signature made Thu 10 May 2018 18:44:34 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180510: (21 commits)
target/arm: Clear SVE high bits for FMOV
target/arm: Fix float16 to/from int16
target/arm: Implement vector shifted FCVT for fp16
target/arm: Implement vector shifted SCVF/UCVF for fp16
target/arm: Enable ARM_FEATURE_V8_ATOMICS for user-only
target/arm: Implement CAS and CASP
target/arm: Fill in disas_ldst_atomic
target/arm: Introduce ARM_FEATURE_V8_ATOMICS and initial decode
target/riscv: Use new atomic min/max expanders
tcg: Use GEN_ATOMIC_HELPER_FN for opposite endian atomic add
tcg: Introduce atomic helpers for integer min/max
target/xtensa: Use new min/max expanders
target/arm: Use new min/max expanders
tcg: Introduce helpers for integer min/max
atomic.h: Work around gcc spurious "unused value" warning
make sure that we aren't overwriting mc->get_hotplug_handler by accident
arm/boot: split load_dtb() from arm_load_kernel()
platform-bus-device: use device plug callback instead of machine_done notifier
pc: simplify MachineClass::get_hotplug_handler handling
softfloat: Handle default NaN mode after pickNaNMulAdd, not before
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# target/riscv/translate.c
If no slots were defined we try to allocate an empty bitmap, which
fails.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20180427120515.24067-1-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
load_dtb() depends on arm_load_kernel() to figure out place
in RAM where it should be loaded, but it's not required for
arm_load_kernel() to work. Sometimes it's neccesary for
devices added with -device/device_add to be enumerated in
DTB as well, which's lead to [1] and surrounding commits to
add 2 more machine_done notifiers with non obvious ordering
to make dynamic sysbus devices initialization happen in
the right order.
However instead of moving whole arm_load_kernel() in to
machine_done, it's sufficient to move only load_dtb() into
virt_machine_done() notifier and remove ArmLoadKernelNotifier/
/PlatformBusFDTNotifierParams notifiers, which saves us ~90LOC
and simplifies code flow quite a bit.
Later would allow to consolidate DTB generation within one
function for 'mach-virt' board and make it reentrant so it
could generate updated DTB in device hotplug secenarios.
While at it rename load_dtb() to arm_load_dtb() since it's
public now.
Add additional field skip_dtb_autoload to struct arm_boot_info
to allow manual DTB load later in mach-virt and to avoid touching
all other boards to explicitly call arm_load_dtb().
1) (ac9d32e hw/arm/boot: arm_load_kernel implemented as a machine init done notifier)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1525691524-32265-4-git-send-email-imammedo@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
platform-bus were using machine_done notifier to get and map
(assign irq/mmio resources) dynamically added sysbus devices
after all '-device' options had been processed.
That however creates non obvious dependencies on ordering of
machine_done notifiers and requires carefull line juggling
to keep it working. For example see comment above
create_platform_bus() and 'straitforward' arm_load_kernel()
had to converted to machine_done notifier and that lead to
yet another machine_done notifier to keep it working
arm_register_platform_bus_fdt_creator().
Instead of hiding resource assignment in platform-bus-device
to magically initialize sysbus devices, use device plug
callback and assign resources explicitly at board level
at the moment each -device option is being processed.
That adds a bunch of machine declaration boiler plate to
e500plat board, similar to ARM/x86 but gets rid of hidden
machine_done notifier and would allow to remove the dependent
notifiers in ARM code simplifying it and making code flow
easier to follow.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 1525691524-32265-3-git-send-email-imammedo@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
By default MachineClass::get_hotplug_handler is NULL and concrete board
should set it to it's own handler.
Considering there isn't any default handler, drop saving empty
MachineClass::get_hotplug_handler in child class and make PC code
consistent with spapr/s390x boards.
We can bring this back when actual usecase surfaces and do it
consistently across boards that use get_hotplug_handler().
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1525691524-32265-2-git-send-email-imammedo@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity (CID1390573) spots that we forgot to free the
gpioname strings in a loop in the iotkit realize function.
Correct the error.
This isn't a significant leak, because this function
only ever runs once.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-id: 20180427110137.19304-1-peter.maydell@linaro.org
* Require libfdt when configuring for 'riscv*-softmmu'
* Increase HTIF priority and allow zero base address
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQR8mZMOsXzYugc9Xvpr8dezV+8+TwUCWvLKRQAKCRBr8dezV+8+
TyOrAKCBiArCoNOD0lIvSdgu8Dv7dKOUaQCeMfS/FkM9wSTOnZgOPKPEZ3xreLY=
=wUet
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riscv/tags/riscv-qemu-2.13-minor-fixes-3' into staging
RISC-V: QEMU 2.13 Minor Fixes
* Require libfdt when configuring for 'riscv*-softmmu'
* Increase HTIF priority and allow zero base address
# gpg: Signature made Wed 09 May 2018 11:15:33 BST
# gpg: using DSA key 6BF1D7B357EF3E4F
# gpg: Good signature from "Michael Clark <michaeljclark@mac.com>"
# gpg: aka "Michael Clark <mjc@sifive.com>"
# gpg: aka "Michael Clark <michael@metaparadigm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7C99 930E B17C D8BA 073D 5EFA 6BF1 D7B3 57EF 3E4F
* remotes/riscv/tags/riscv-qemu-2.13-minor-fixes-3:
riscv: requires libfdt
riscv: htif: increase the priority of the htif subregion
riscv: spike: allow base == 0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The sanity check on base doesn't allow htif to be mapped @0. Check if the
symbol exists instead so we can map it where we want.
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Message-Id: <1525360636-18229-2-git-send-email-frederic.konrad@adacore.com>
* pc-dimm: factor out MemoryDevice
(virtio-pmem and virtio-mem will make use of the new abstraction later)
* scripts/device-crash-test: Removed fixed CAN entries
-----BEGIN PGP SIGNATURE-----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=Hhge
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
Machine queue, 2018-05-07
* pc-dimm: factor out MemoryDevice
(virtio-pmem and virtio-mem will make use of the new abstraction later)
* scripts/device-crash-test: Removed fixed CAN entries
# gpg: Signature made Mon 07 May 2018 18:01:42 BST
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request:
scripts/device-crash-test: Removed fixed CAN entries
vl: allow 'maxmem' without 'slot'
spapr: rename "hotplug memory" terminology to "device memory"
pc: rename "hotplug memory" terminology to "device memory"
machine: rename MemoryHotplugState to DeviceMemoryState
pc-dimm: move actual plug/unplug of a memory region to MemoryDevice
pc-dimm: factor out capacity and slot checks into MemoryDevice
pc-dimm: factor out address search into MemoryDevice code
pc-dimm: pass in the machine and to the MemoryHotplugState
pc-dimm: no need to pass the memory region
machine: make MemoryHotplugState accessible via the machine
pc-dimm: factor out MemoryDevice interface
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Several code cleanups, minor specification conformance changes,
fixes to make ROM read-only and add device-tree size checks.
* Honour privileged ISA v1.10 counter enable CSRs.
* Implements WARL behavior for CSRs that don't support writes
* Past behavior of raising traps was non-conformant
with the RISC-V Privileged ISA Specification v1.10.
* Allow S-mode access to sstatus.MXR when priv ISA >= v1.10
* Sets mtval/stval to zero on exceptions without addresses
* Past behavior of leaving the last value was non-conformant
with the RISC-V Privileged ISA Specition v1.10. mtval/stval
must be set on all exceptions; to zero if not supported.
* Make ROMs read-only and implement device-tree size checks
* Uses memory_region_init_rom and rom_add_blob_fixed_as
* Adds hexidecimal instruction bytes to disassembly output.
* Fixes missing break statement for rv128 disassembly.
* Several code cleanups
* Replacing hard-coded constants with enums
* Dead-code elimination
This is an incremental pull that contains 20 reviewed changes out
of 38 changes currently queued in the qemu-2.13-for-upstream branch.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQR8mZMOsXzYugc9Xvpr8dezV+8+TwUCWu496QAKCRBr8dezV+8+
T1ZEAJ4wQRHZtn4suN5yMEHQMA2FkX1iNACgiYWLtcNcgoa88eaTcJJJu4QZryY=
=I2wf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riscv/tags/riscv-qemu-2.13-pull-20180506' into staging
RISC-V: QEMU 2.13 Privileged ISA emulation updates
Several code cleanups, minor specification conformance changes,
fixes to make ROM read-only and add device-tree size checks.
* Honour privileged ISA v1.10 counter enable CSRs.
* Implements WARL behavior for CSRs that don't support writes
* Past behavior of raising traps was non-conformant
with the RISC-V Privileged ISA Specification v1.10.
* Allow S-mode access to sstatus.MXR when priv ISA >= v1.10
* Sets mtval/stval to zero on exceptions without addresses
* Past behavior of leaving the last value was non-conformant
with the RISC-V Privileged ISA Specition v1.10. mtval/stval
must be set on all exceptions; to zero if not supported.
* Make ROMs read-only and implement device-tree size checks
* Uses memory_region_init_rom and rom_add_blob_fixed_as
* Adds hexidecimal instruction bytes to disassembly output.
* Fixes missing break statement for rv128 disassembly.
* Several code cleanups
* Replacing hard-coded constants with enums
* Dead-code elimination
This is an incremental pull that contains 20 reviewed changes out
of 38 changes currently queued in the qemu-2.13-for-upstream branch.
# gpg: Signature made Sun 06 May 2018 00:27:37 BST
# gpg: using DSA key 6BF1D7B357EF3E4F
# gpg: Good signature from "Michael Clark <michaeljclark@mac.com>"
# gpg: aka "Michael Clark <mjc@sifive.com>"
# gpg: aka "Michael Clark <michael@metaparadigm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7C99 930E B17C D8BA 073D 5EFA 6BF1 D7B3 57EF 3E4F
* remotes/riscv/tags/riscv-qemu-2.13-pull-20180506:
RISC-V: Mark ROM read-only after copying in code
RISC-V: No traps on writes to misa,minstret,mcycle
RISC-V: Make mtvec/stvec ignore vectored traps
RISC-V: Add mcycle/minstret support for -icount auto
RISC-V: Use [ms]counteren CSRs when priv ISA >= v1.10
RISC-V: Allow S-mode mxr access when priv ISA >= v1.10
RISC-V: Clear mtval/stval on exceptions without info
RISC-V: Hardwire satp to 0 for no-mmu case
RISC-V: Update E and I extension order
RISC-V: Remove erroneous comment from translate.c
RISC-V: Remove EM_RISCV ELF_MACHINE indirection
RISC-V: Make virt header comment title consistent
RISC-V: Make some header guards more specific
RISC-V: Fix missing break statement in disassembler
RISC-V: Include instruction hex in disassembly
RISC-V: Remove unused class definitions
RISC-V: Remove identity_translate from load_elf
RISC-V: Use ROM base address and size from memmap
RISC-V: Make virt board description match spike
RISC-V: Replace hardcoded constants with enum values
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu-system-ppc fails to build with GCC 8.0.1:
/home/hsp/src/qemu-master/hw/ppc/e500.c: In function ‘ppce500_load_device_tree’:
/home/hsp/src/qemu-master/hw/ppc/e500.c:442:37: error: ‘/pic@’
directive output may be truncated writing 5 bytes into a region of
size between 1 and 128 [-Werror=format-truncation=]
snprintf(mpic, sizeof(mpic), "%s/pic@%llx", soc, MPC8544_MPIC_REGS_OFFSET);
^~~~~
In file included from /usr/include/stdio.h:862,
from /home/hsp/src/qemu-master/include/qemu/osdep.h:68,
from /home/hsp/src/qemu-master/hw/ppc/e500.c:17:
/usr/include/bits/stdio2.h:64:10: note: ‘__builtin___snprintf_chk’
output between 11 and 138 bytes into a destination of size 128
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/hsp/src/qemu-master/hw/ppc/e500.c:470:39: error:
‘/global-utilities@’ directive output may be truncated writing 18
bytes into a region of size between 1 and 128
[-Werror=format-truncation=]
snprintf(gutil, sizeof(gutil), "%s/global-utilities@%llx", soc,
^~~~~~~~~~~~~~~~~~
In file included from /usr/include/stdio.h:862,
from /home/hsp/src/qemu-master/include/qemu/osdep.h:68,
from /home/hsp/src/qemu-master/hw/ppc/e500.c:17:
/usr/include/bits/stdio2.h:64:10: note: ‘__builtin___snprintf_chk’
output between 24 and 151 bytes into a destination of size 128
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/hsp/src/qemu-master/hw/ppc/e500.c:477:36: error: ‘/msi@’
directive output may be truncated writing 5 bytes into a region of
size between 0 and 127 [-Werror=format-truncation=]
snprintf(msi, sizeof(msi), "/%s/msi@%llx", soc, MPC8544_MSI_REGS_OFFSET);
^~~~~
In file included from /usr/include/stdio.h:862,
from /home/hsp/src/qemu-master/include/qemu/osdep.h:68,
from /home/hsp/src/qemu-master/hw/ppc/e500.c:17:
/usr/include/bits/stdio2.h:64:10: note: ‘__builtin___snprintf_chk’
output between 12 and 139 bytes into a destination of size 128
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by converting e500 to use g_strdup_printf()+g_free() instead
of snprintf(). This is done globally, even for call sites that don't
break build, since this is the preferred practice in QEMU.
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 152568372989.443627.900708381919207053.stgit@bahia.lan
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's make it clear at relevant places that we are dealing with device
memory. That it can be used for memory hotplug is just a special case.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-11-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
[ehabkost: rebased series, solved conflicts at spapr.c]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's make it clear that we are dealing with device memory. That it can
be used for memory hotplug is just a special case.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-10-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Rename it to better match the new terminology.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-9-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Registering the memory region for migration has do be done by the owner.
There could be cases, where we don't want to migrate the memory.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-8-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move the checks into memory_device_get_free_addr(). This will check
before doing any calculations if we have KVM/vhost slots left and if
the total region size would be exceeded.
Of course, while at it, make it independent of pc-dimm code.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-7-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This mainly moves code, but does a handfull of optimizations:
- We pass the machine instead of the address space properties
- We check the hinted address directly and handle fragmented memory
better
- We make the search independent of pc-dimm
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-6-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We use the machine internally either way, so let's just pass it in then.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-5-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We can just query it ourselves. When unplugging, we should always be
able to the region (as it was previously plugged). E.g. PPC already
assumed that and used &error_abort.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-4-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's allow to query the MemoryHotplugState directly from the machine.
If the pointer is NULL, the machine does not support memory devices. If
the pointer is !NULL, the machine supports memory devices and the
data structure contains information about the applicable physical
guest address space region.
This allows us to generically detect if a certain machine has support
for memory devices, and to generically manage it (find free address
range, plug/unplug a memory region).
We will rename "MemoryHotplugState" to something more meaningful
("DeviceMemory") after we completed factoring out the pc-dimm code into
MemoryDevice code.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-3-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
[ehabkost: rebased series, solved conflicts at spapr.c]
[ehabkost: squashed fix to use g_malloc0()]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
On the qmp level, we already have the concept of memory devices:
"query-memory-devices"
Right now, we only support NVDIMM and PCDIMM.
We want to map other devices later into the address space of the guest.
Such device could e.g. be virtio devices. These devices will have a
guest memory range assigned but won't be exposed via e.g. ACPI. We want
to make them look like memory device, but not glued to pc-dimm.
Especially, it will not always be possible to have TYPE_PC_DIMM as a parent
class (e.g. virtio devices). Let's use an interface instead. As a first
part, convert handling of
- qmp_pc_dimm_device_list
- get_plugged_memory_size
to our new model. plug/unplug stuff etc. will follow later.
A memory device will have to provide the following functions:
- get_addr(): Necessary, as the property "addr" can e.g. not be used for
virtio devices (already defined).
- get_plugged_size(): The amount this device offers to the guest as of
now.
- get_region_size(): Because this can later on be bigger than the
plugged size.
- fill_device_info(): Fill MemoryDeviceInfo, e.g. for qmp.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-2-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Make sure we only ask the spice local renderer for display updates in
case we have a valid primary surface. Without that spice is confused
and throws errors in case a display update request (triggered by
screendump for example) happens in parallel to a mode switch and hits
the race window where the old primary surface is gone and the new isn't
establisted yet.
Cc: qemu-stable@nongnu.org
Fixes: https://bugzilla.redhat.com//show_bug.cgi?id=1567733
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180427115528.345-1-kraxel@redhat.com
usb-host emulates a device unplug after live migration, because the
device state is unknown and unplug/replug makes sure the guest
re-initializes the device into a working state. This can't be done in
post-load though, so post-load just schedules a bottom half which
executes after vmload is complete.
It can happen that the device autoscan timer hits the race window
between scheduling and running the bottom half, which in turn can
triggers an assert().
Fix that issue by just ignoring the usb_host_open() call in case the
bottom half didn't execute yet.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1572851
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180503062932.17233-1-kraxel@redhat.com
Currently, it's only being checked if desc is NULL and
so write support breaks upon specifying desc
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180503192028.14353-3-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
CID 1390578: In usb_mtp_write_metadata, parent can never be NULL but
just in case, add an assert
CID 1390592: Check for o->format only if o !=NULL
CID 1390604: Check s->data_out != NULL in usb_mtp_handle_data
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180503192028.14353-2-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The sifive_u machine already marks its ROM readonly however
it has the wrong base address for its mask ROM. This patch
fixes the sifive_u mask ROM base address.
This commit makes all other boards consistently use mask_rom
as the variable name for their ROMs. Boards that use device
tree now check that that the device tree fits in the assigned
ROM space using the new qemu_fdt_totalsize(void *fdt)
interface, adding a bounds check and error message. This
can detect truncation.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <Alistair.Francis@wdc.com>
Removes a whole lot of unnecessary boilerplate code. Machines
don't need to be objects. The expansion of the SOC object model
for the RISC-V machines will happen in the future as SiFive
plans to add their FE310 and FU540 SOCs to QEMU. However, it
seems that this present boilerplate is complete unnecessary.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
When load_elf is called with NULL as an argument to the
address translate callback, it does an identity translation.
This commit removes the redundant identity_translate callback.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Another case of replacing hard coded constants, this time
referring to the definition in the virt machine's memmap.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
This makes 'qemu-system-riscv64 -machine help' output more tidy
and consistent.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V device-tree code has a number of hard-coded
constants and this change moves them into header enums.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
ARM virt machine now exposes a new "iommu" option.
The SMMUv3 IOMMU is instantiated using -machine virt,iommu=smmuv3.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1524665762-31355-15-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch builds the smmuv3 node in the ACPI IORT table.
The RID space of the root complex, which spans 0x0-0x10000
maps to streamid space 0x0-0x10000 in smmuv3, which in turn
maps to deviceid space 0x0-0x10000 in the ITS group.
The guest must feature the IOMMU probe deferral series
(https://lkml.org/lkml/2017/4/10/214) which fixes streamid
multiple lookup. This bug is not related to the SMMU emulation.
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com>
Message-id: 1524665762-31355-14-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add code to instantiate an smmuv3 in virt machine. A new iommu
integer member is introduced in VirtMachineState to store the type
of the iommu in use.
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1524665762-31355-13-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At the moment, the SMMUv3 does not support notification on
TLB invalidation. So let's log an error as soon as such notifier
gets enabled.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1524665762-31355-11-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements the IOMMU Memory Region translate()
callback. Most of the code relates to the translation
configuration decoding and check (STE, CD).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Message-id: 1524665762-31355-10-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's introduce a helper function aiming at recording an
event in the event queue.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1524665762-31355-9-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now we have relevant helpers for queue and irq
management, let's implement MMIO write operations.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1524665762-31355-8-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We introduce helpers to read/write into the command and event
circular queues.
smmuv3_write_eventq and smmuv3_cmq_consume will become static
in subsequent patches.
Invalidation commands are not yet dealt with. We do not cache
data that need to be invalidated. This will change with vhost
integration.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1524665762-31355-7-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We introduce some helpers to handle wired IRQs and especially
GERROR interrupt. SMMU writes GERROR register on GERROR event
and SW acks GERROR interrupts by setting GERRORn.
The Wired interrupts are edge sensitive hence the pulse usage.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1524665762-31355-6-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements a skeleton for the smmuv3 device.
Datatypes and register definitions are introduced. The MMIO
region, the interrupts and the queue are initialized.
Only the MMIO read operation is implemented here.
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1524665762-31355-5-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements the page table walk for VMSAv8-64.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Message-id: 1524665762-31355-4-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We set up the infrastructure to enumerate all the PCI devices
attached to the SMMU and create an associated IOMMU memory
region and address space.
Those info are stored in SMMUDevice objects. The devices are
grouped according to the PCIBus they belong to. A hash table
indexed by the PCIBus pointer is used. Also an array indexed by
the bus number allows to find the list of SMMUDevices.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1524665762-31355-3-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The patch introduces the smmu base device and class for the ARM
smmu. Devices for specific versions will be derived from this
base device.
We also introduce some important datatypes.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1524665762-31355-2-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When running omap1/2 or pxa2xx based ARM machines with -nodefaults,
they bail out immediately complaining about a "missing SecureDigital
device". That's not how the "default" devices in vl.c are meant to
work - it should be possible for a board to also start up without
default devices. So let's turn the error message and exit() into
a warning instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1525326811-3233-1-git-send-email-thuth@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Even though nothing is currently broken (since all boards
use first_cpu as boot cpu), make sure that boot_info is set
on all CPUs.
If some board would like support heterogenuos setup (i.e.
init boot_info on subset of CPUs) in future, it should add
a reasonable API to do it, instead of starting assigning
boot_info from some CPU and till the end of present CPUs
list.
Ref:
"Message-ID: <CAFEAcA_NMWuA8WSs3cNeY6xX1kerO_uAcN_3=fK02BEhHJW86g@mail.gmail.com>"
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1525176522-200354-5-git-send-email-imammedo@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the smc91c111 device away from using the old_mmio field of
MemoryRegionOps. This device is used by several Arm board models.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180427173611.10281-3-peter.maydell@linaro.org
Convert the tusb6010 device away from using the old_mmio field
of MemoryRegionOps. This device is used only in the n800 and n810
boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180427173611.10281-2-peter.maydell@linaro.org
The character frontend needs to be notified that the uart receive buffer
is empty and ready to handle another character.
Previously, the uart only worked correctly when receiving one character
at a time.
Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
Message-id: CAEg67GkRTw=cXei3o9hvpxG_L4zSrNzR0bFyAgny+sSEUb_kPw@mail.gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows to pin the host controller in the Linux PCI domain space.
Linux requires that property to be available consistently or not at all,
in which case the domain number becomes unstable on additions/removals.
Adding it here won't make a difference in practice for most setups as we
only expose one controller.
However, enabling Jailhouse on top may introduce another controller, and
that one would like to have stable address as well. So the property is
needed for the first controller as well.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 3301c5bc-7b47-1b0e-8ce4-30435057a276@web.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=Kukn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2018-05-04' into staging
QAPI patches for 2018-05-04
# gpg: Signature made Fri 04 May 2018 08:59:16 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2018-05-04:
qapi: deprecate CpuInfoFast.arch
qapi: discriminate CpuInfoFast on SysEmuTarget, not CpuInfoArch
qapi: change the type of TargetInfo.arch from string to enum SysEmuTarget
qapi: add SysEmuTarget to "common.json"
qapi: fill in CpuInfoFast.arch in query-cpus-fast
qobject: Modify qobject_ref() to return obj
qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREF
qobject: use a QObjectBase_ struct
qobject: Ensure base is at offset 0
qobject: Use qobject_to() instead of type cast
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- new machine type
- extend SCLP event masks
- support configuration of consoles via -serial
- firmware improvements: non-sequential entries in boot menu, support
for indirect loading via .INS files in s390-netboot
- bugfixes and cleanups
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEw9DWbcNiT/aowBjO3s9rk8bwL68FAlrsCZ0SHGNvaHVja0By
ZWRoYXQuY29tAAoJEN7Pa5PG8C+vrN8QAKP3poc2wm/+32vCUv+qUyHby6cm5bl+
2PeHS/CLC1q/nIggb1l8z9I3BeVSgeWB3B5/dKHvuRM4sVGslg2t2ivSXXbU06Na
4sv9NaPh1DV0YLuSIj7gIbk9BZdsuw5Ik2846KIFW4HjYmgWJZJc9WhC+ezBqMLI
jbOUQiQk7JfhJ0julc5Z1BcZN50PxUquvN8BmmS+QHhbdcQ0xMjmlDpkhGNzk9Hg
+Ui6Fu5HOnybGXE3u9V+xS1I9Gn0cG90lgGFkIRgGO6oqn0C0hmYfrcXc11xg9yH
/hUx+lIg3k44T6e2nG6IxDyuAfugxJiKeD1PscAd8DzBceKHxpIVk37xoITlCO25
iRAcvToruaxZf0RSprQsW3DCto5cEhdX5XLVs6J5I/jlBqNgllKkezS5mG2fpibe
xH7MlRL00DqaNEqWCrQ2+64w5THIkkiukYQLv6eDdoaTP/6emJ6KeqGr7KDbijvx
ViR8LQ2aaGR/sL90X/HDNvR3otnC3doAQTCjlxDlHkjE3hSL9Z6Nvq4KBztiP418
leHoiscmzRLJzagAhOn+uZWjETnoBKv1OnEN1yLf80ADz/FaArvnb9zq5KR6Oh43
30+5RKLFKaDx6fnXGB2eqIOgq/4x1wXcGwRCBpRfYDXc/pQjbnj7AsKQiSTdTOa3
hfTCL7/LscMU
=cYvD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180504' into staging
First s390x pull request for 2.13.
- new machine type
- extend SCLP event masks
- support configuration of consoles via -serial
- firmware improvements: non-sequential entries in boot menu, support
for indirect loading via .INS files in s390-netboot
- bugfixes and cleanups
# gpg: Signature made Fri 04 May 2018 08:19:57 BST
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20180504:
pc-bios/s390: Update firmware images
s390-ccw: force diag 308 subcode to unsigned long
pc-bios/s390-ccw/net: Add support for .INS config files
pc-bios/s390-ccw/net: Use diag308 to reset machine before jumping to the OS
pc-bios/s390-ccw/net: Split up net_load() into init, load and release parts
pc-bios/s390-ccw: fix non-sequential boot entries (enum)
pc-bios/s390-ccw: fix non-sequential boot entries (eckd)
pc-bios/s390-ccw: fix loadparm initialization and int conversion
pc-bios/s390-ccw: rename MAX_TABLE_ENTRIES to MAX_BOOT_ENTRIES
pc-bios/s390-ccw: size_t should be unsigned
hw/s390x: Allow to configure the consoles with the "-serial" parameter
s390x/kvm: cleanup calls to cpu_synchronize_state()
vfio-ccw: introduce vfio_ccw_get_device()
s390x/sclp: extend SCLP event masks to 64 bits
s390x: introduce 2.13 compat machine
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Second patch of patches for qemu-2.13 (or whatever the version ends up
being called). Highlights are:
* Preliminary patches for POWER9 hash MMU support for powernv
* A number of cleanups fo pseries startup and LPCR handling
* Remove support for explicitly allocated RMAs (which require kernel
support that's been gone for 3+ years)
* Some mac_newworld cleanups
* A few bugfixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAlrr6p8ACgkQbDjKyiDZ
s5IxDQ/+NIZzD6xmMW0AtTes73Sn5uy3vB5utv/mgjbKuoovCE+FRtVXAPVlc41O
q6Y8f0PWCfTbJb+G/XusSyQX9kc/anmmyQdrWuCbMFYJgwf9Fy3NVntx6HzppTub
HEQJTdiPU3VCt3et1C4R9NqJmyG8n8qfyoa3oeEY+LTdIEQTRxgmzVfxMzfOddGQ
jlvtwUqzGwSkXiJ/ZpKwFrn2XQiuvRdGeypMZWTk6ZsPAUHUpYvWO4LvhCmMsy1E
PErwpHm8XCzOmkcdz2C6c7S9sfg1b8axllzwA5o6forfi9Hu8lk7EK08SRN0SUMf
qjBA3upaQ4/HyKOuHMEAnVLErSerUOAM4hpkSt2ua9/KRR7zkx0pzqvAFPAKCuUv
jXkYq/PlkbzxglkFiHaVyywAA7UBRPzTBn7NWhAf3XPtfcN5z/pU5qdeLAFRyw/U
J77ET0Xq50po16uLIn8MVJY315C+kLvL8uz7IW6vN3koW4ZQeJ+v7s5S5ZZv20CY
zLC5N/2loNyOVBvB3mTc+fa+HTDv8B9UBn+gLMHfzuCUbHiDC8BSKk/Z/FtpNCEG
lW9whJ/prjZ+VTIiJxbSTg5o8UPl9RAAhDxi6g09BiJe9dBYWdYAe0EenSUllETy
jfYeKbo0PG0NcbcsvxapCW1zvarMbczmpNWAe2w4MPuXUj+vfUc=
=CAwC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.13-20180504' into staging
ppc patch queue 2018-05-04
Second patch of patches for qemu-2.13 (or whatever the version ends up
being called). Highlights are:
* Preliminary patches for POWER9 hash MMU support for powernv
* A number of cleanups fo pseries startup and LPCR handling
* Remove support for explicitly allocated RMAs (which require kernel
support that's been gone for 3+ years)
* Some mac_newworld cleanups
* A few bugfixes
# gpg: Signature made Fri 04 May 2018 06:07:43 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.13-20180504:
spapr: don't advertise radix GTSE if max-compat-cpu < power9
spapr: don't migrate "spapr_option_vector_ov5_cas" to pre 2.8 machines
target/ppc: always set PPC_MEM_TLBIE in pre 2.8 migration hack
mac_newworld: move wiring of macio IRQs to macio_newworld_realize()
mac_newworld: remove pics IRQ array and wire up macio to OpenPIC directly
uninorth: create new uninorth device
spapr: Clean up handling of LPCR power-saving exit bits
spapr: Move PAPR mode cpu setup fully to spapr code
target/ppc: Delay initialization of LPCR_UPRT for secondary cpus
spapr: Clean up LPCR updates from hypercalls
spapr: Make a helper to set up cpu entry point state
spapr: Remove unhelpful helpers from rtas_start_cpu()
spapr: Clean up rtas_start_cpu() & rtas_stop_self()
target/ppc: Add ppc_store_lpcr() helper
spapr: Remove support for explicitly allocated RMAs
target/ppc: add basic support for PTCR on POWER9
target/ppc: return a nil HPT base address on sPAPR machines
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
On a POWER9 host, if a guest runs in pre POWER9 compat mode, it necessarily
uses the hash MMU mode. In this case, we shouldn't advertise radix GTSE in
the ibm,arch-vec-5-platform-support DT property as the current code does.
The first reason is that it doesn't make sense, and the second one is that
causes the CAS-negotiated options subsection to be migrated. This breaks
backward migration to QEMU 2.7 and older versions on POWER8 hosts:
qemu-system-ppc64: error while loading state for instance 0x0 of device
'spapr'
qemu-system-ppc64: load of migration failed: No such file or directory
This patch hence initialize CPUs a bit earlier so that we can check the
requested compat mode, and don't set OV5_MMU_RADIX_GTSE for power8 and
older.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
a324d6f166 "spapr: Support ibm,dynamic-memory-v2 property" added
a new feature in the set of CAS-negotiatable options. This causes
the CAS-negotiated options subsection to be migrated, even for old
machine types that don't know about it, and breaks backward migration
to QEMU 2.7 and older versions:
qemu-system-ppc64: error while loading state for instance 0x0 of device
'spapr'
qemu-system-ppc64: load of migration failed: No such file or directory
Since this feature only affects boot time behaviour, it should be
filtered out when we decide to migrate CAS-negotiated options, like
we already do with OV5_FORM1_AFFINITY and OV5_DRCONF_MEMORY.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since the macio device has a link to the PIC device, we can now wire up the
IRQs directly via qdev GPIOs rather than having to use an intermediate array.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduce constants for the pre-defined New World IRQs to help keep things
readable.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 4e46dcdbd3 "PPC: Newworld: Add uninorth token register" added a TODO
which was to convert the uninorth registers hack to a proper device. Move
these registers to a new uninorth device, removing the old hacks from
mac_newworld.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To prevent spurious wakeups on cpus that are supposed to be disabled, we
need to clear the LPCR bits which control certain wakeup events.
spapr_cpu_reset() has separate cases here for boot and non-boot (initially
inactive) cpus. rtas_start_cpu() then turns the LPCR bits on when the
non-boot cpus are activated.
But explicit checks against first_cpu are not how we usually do things:
instead spapr_cpu_reset() generally sets things up for non-boot (inactive)
cpus, then spapr_machine_reset() and/or rtas_start_cpu() override as
necessary.
So, do that instead. Because the LPCR activation is identical for boot
cpus and non-boot cpus just activated with rtas_start_cpu() we can put the
code common in spapr_cpu_set_entry_state().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
cpu_ppc_set_papr() does several things:
1) it sets up the virtual hypervisor interface
2) it prevents the cpu from ever entering hypervisor mode
3) it tells KVM that we're emulating a cpu in PAPR mode
and 4) it configures the LPCR and AMOR (hypervisor privileged registers)
so that TCG will behave correctly for PAPR guests, without
attempting to emulate the cpu in hypervisor mode
(1) & (2) make sense for any virtual hypervisor (if another one ever
exists).
(3) belongs more properly in the machine type specific to a PAPR guest, so
move it to spapr_cpu_init(). While we're at it, remove an ugly test on
kvm_enabled() by making kvmppc_set_papr() a safe no-op on non-KVM.
(4) also belongs more properly in the machine type specific code. (4) is
done by mangling the default values of the SPRs, so that they will be set
correctly at reset time. Manipulating usually-static parameters of the cpu
model like this is kind of ugly, especially since the values used really
have more to do with the platform than the cpu.
The spapr code already has places for PAPR specific initializations of
register state in spapr_cpu_reset(), so move this handling there.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
In cpu_ppc_set_papr() the UPRT and GTSE bits of the LPCR default value are
initialized based on on ppc64_radix_guest(). Which seems reasonable,
except that ppc64_radix_guest() is based on spapr->patb_entry which is
only set up in spapr_machine_reset, called _after_ cpu_ppc_set_papr() for
boot cpus. Well, and the fact that modifying the SPR default value for an
instance rather than a class is kind of yucky.
The initialization here is really only necessary or valid for
hotplugged cpus; the base cpu initialization already sets a value
that's good enough for the boot cpus until the guest uses an hcall to
configure it's preferred MMU mode.
So, move this initialization to the rtas_start_cpu() path, at which point
ppc64_radix_guest() will have a sensible value, to make sure secondary cpus
come up in an MMU mode matching the existing cpus.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
There are several places in spapr_hcall.c where we need to update the LPCR
value on all CPUs. We do this with the set_spr() helper. That's not
really correct because this directly sets the SPR value, without going
through the ppc_store_lpcr() helper which may need to update state based
on the LPCR change.
In fact, set_spr() is only ever used for the LPCR, so replace it with an
explicit LPCR updated which uses the right low-level helper. While we're
there, move the CPU_FOREACH() which was in every one of the callers into
the new helper: set_all_lpcrs().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Under PAPR, only the boot CPU is active when the system starts. Other cpus
must be explicitly activated using an RTAS call. The entry state for the
boot and secondary cpus isn't identical, but it has some things in common.
We're going to add a bit more common setup later, too, so to simplify
make a helper which sets up the common entry state for both boot and
secondary cpu threads.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
rtas_start_cpu() calls spapr_cpu_update_tb_offset() and
spapr_cpu_set_endianness() to initialize certain things in the new cpu's
state. This is the only caller of those helpers, and they're each only
a few lines long, so we might as well just fold them into the caller.
In addition, those helpers initialize state on the new cpu to match that of
the first cpu. That will generally work, but might be at least logically
incorrect if the first cpu has been set offline by the guest. So, instead
base the state on that of the cpu invoking the RTAS call, which is
obviously active already.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
This makes several minor cleanups to these functions:
* Follow usual convention of an early exit on error, rather than having
most of the body in an if
* Clearer naming of cpu and cpu_. Now callcpu is the cpu from which the
RTAS call is invoked, newcpu is the cpu which we're starting
* Use cpu_synchronize_state() instead of kvm_cpu_synchronize_state()
directly
* Remove pointless comment describing what cpu_synchronize_state() does
* Use ppc_store_lpcr() instead of directly writing the register field
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Current POWER cpus allow for a VRMA, a special mapping which describes a
guest's view of memory when in real mode (MMU off, from the guest's point
of view). Older cpus didn't have that which meant that to support a guest
a special host-contiguous region of memory was needed to give the guest its
Real Mode Area (RMA).
KVM used to provide special calls to allocate a contiguous RMA for those
cases. This was useful in the early days of KVM on Power to allow it to be
tested on PowerPC 970 chips as used in Macintosh G5 machines. Now, those
machines are so old as to be almost irrelevant.
The normal qemu deprecation process would require this to be marked
deprecated then removed in 2 releases. However, this can only be used
with corresponding support in the host kernel - which was dropped
years ago (in c17b98cf "KVM: PPC: Book3S HV: Remove code for PPC970
processors" of 2014-12-03 to be precise). Therefore it should be ok
to drop this immediately.
Just to be clear this only affects *KVM HV* guests with PowerPC 970,
and those already require an ancient host kernel. TCG and KVM PR
guests with PowerPC 970 should still work.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Thomas Huth <thuth@redhat.com>
Make sure the backend GID index is less then port's
gid table length.
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20180430200223.4119-8-marcel.apfelbaum@gmail.com>
By a mistake this constant was defined twice - remove the duplication.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180430200223.4119-7-marcel.apfelbaum@gmail.com>
Coverity (CID1390589, CID1390608).
Array size is RDMA_BAR1_REGS_SIZE, let's make sure the given address is
in range.
While there also:
1. Adjust the size of this bar to reasonable size
2. Report the size of the array with sizeof(array)
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180430200223.4119-6-marcel.apfelbaum@gmail.com>
Array size is MAX_PORT_GIDS, let's make sure the given index is in
range.
While there limit device table size to 1.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180430200223.4119-5-marcel.apfelbaum@gmail.com>
Support for PKEY is not yet implemented. Removing the unneeded table
until a support will be added.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180430200223.4119-4-marcel.apfelbaum@gmail.com>
Coverity CID 1390586; The cq handle is provided by the guest
and cannot be trusted to be previuosly allocated.
Fix it by exiting the completion flow.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20180430200223.4119-3-marcel.apfelbaum@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Rename the loadparm char array in main.c to loadparm_str and
increased the size by one byte to account for a null termination
when converting the loadparm string to an int via atoui. We
also allow the boot menu to be enabled when loadparm is set to
an empty string or a series of spaces.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Don't print the tv_nsec part of atime and mtime, to stay below the 10
argument limit of trace events.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The consoles ("sclpconsole" and "sclplmconsole") can only be configured
with "-device" and "-chardev" so far. Other machines use the convenience
option "-serial" to configure the default consoles, even for virtual
consoles like spapr-vty on the pseries machine. So let's support this
option on s390x, too. This way we can easily enable the serial console
here again with "-nodefaults", for example:
qemu-system-s390x -no-shutdown -nographic -nodefaults -serial mon:stdio
... which is way shorter than typing:
qemu-system-s390x -no-shutdown -nographic -nodefaults \
-chardev stdio,id=c1,mux=on -device sclpconsole,chardev=c1 \
-mon chardev=c1
The -serial parameter can also be used if you only want to see the QEMU
monitor on stdio without using -nodefaults, but not the console output.
That's something that is pretty impossible with the current code today:
qemu-system-s390x -no-shutdown -nographic -serial none
While we're at it, this patch also maps the second -serial option to the
"sclplmconsole", so that there is now an easy way to configure this second
console on s390x, too, for example:
qemu-system-s390x -no-shutdown -nographic -serial null -serial mon:stdio
Additionally, the new code is also smaller than the old one and we have
less s390x-specific code in vl.c :-)
I've also checked that migration still works as expected by migrating
a guest with console output back and forth between a qemu-system-s390x
that has this patch and an instance without this patch.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1524754794-28005-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We have a call to cpu_synchronize_state() on every kvm_arch_handle_exit().
Let's remove the ones that are no longer needed.
Remaining places (for s390x) are in
- target/s390x/sigp.c, on the target CPU
- target/s390x/cpu.c:s390_cpu_get_crash_info()
While at it, use kvm_cpu_synchronize_state() instead of
cpu_synchronize_state() in KVM code. (suggested by Thomas Huth)
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180412093521.2469-1-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
A recent patch fixed leaks of the dynamically allocated vcdev->vdev.name
field in vfio_ccw_realize(), but we now have three freeing sites for it.
This is unfortunate and seems to indicate something is wrong with its
life cycle.
The root issue is that vcdev->vdev.name is set before vfio_get_device()
is called, which theoretically prevents to call vfio_put_device() to
do the freeing. Well actually, we could call it anyway because
vfio_put_base_device() is a nop if the device isn't attached, but this
would be confusing.
This patch hence moves all the logic of attaching the device, including
the "already attached" check, to a separate vfio_ccw_get_device() function,
counterpart of vfio_put_device(). While here, vfio_put_device() is renamed
to vfio_ccw_put_device() for consistency.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <152326891065.266543.9487977590811413472.stgit@bahia.lan>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Extend the SCLP event masks to 64 bits.
Notice that using any of the new bits results in a state that cannot be
migrated to an older version.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1520507069-22179-1-git-send-email-imbrenda@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
During guest OS reboot, guest framebuffer is invalid. It will cause
bugs, if the invalid guest framebuffer is still used by host.
This patch is to introduce vfio_display_reset which is invoked
during vfio display reset. This vfio_display_reset function is used
to release the invalid display resource, disable scanout mode and
replace the invalid surface with QemuConsole's DisplaySurafce.
This patch can fix the GPU hang issue caused by gd_egl_draw during
guest OS reboot.
Changes v3->v4:
- Move dma-buf based display check into the vfio_display_reset().
(Gerd)
Changes v2->v3:
- Limit vfio_display_reset to dma-buf based vfio display. (Gerd)
Changes v1->v2:
- Use dpy_gfx_update_full() update screen after reset. (Gerd)
- Remove dpy_gfx_switch_surface(). (Gerd)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Message-id: 1524820266-27079-3-git-send-email-tina.zhang@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When trying to build with latest libcacard-2.5.1, I hit the
following error:
In file included from hw/usb/ccid-card-passthru.c:12:0:
/usr/include/cacard/vscard_common.h:26:2: error: #warning "Only <libcacard.h> can be included directly" [-Werror=cpp]
#warning "Only <libcacard.h> can be included directly"
While it was fixed in libcacard upstream (so that individual
files can be included directly), it doesn't make much sense.
Let's switch to including the main libcacard.h and also require
at least libcacard-2.5.1 which introduced it. It's available
since late 2015.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 3c36db1dc0702763ebb7966cc27428ed67d43804.1522751624.git.mprivozn@redhat.com
[ kraxel: fix include path ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
libusb-1.0.22 marked libusb_set_debug deprecated
it is replaced with
libusb_set_option(libusb_context, LIBUSB_OPTION_LOG_LEVEL, libusb_log_level);
details here: 539f22e2fd
Warning here:
CC hw/usb/host-libusb.o
/builds/xen/src/qemu-xen/hw/usb/host-libusb.c: In function 'usb_host_init':
/builds/xen/src/qemu-xen/hw/usb/host-libusb.c:250:5: error: 'libusb_set_debug' is deprecated: Use libusb_set_option instead [-Werror=deprecated-declarations]
libusb_set_debug(ctx, loglevel);
^~~~~~~~~~~~~~~~
In file included from /builds/xen/src/qemu-xen/hw/usb/host-libusb.c:40:0:
/usr/include/libusb-1.0/libusb.h:1300:18: note: declared here
void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level);
^~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [/builds/xen/src/qemu-xen/rules.mak:66: hw/usb/host-libusb.o] Error 1
make: Leaving directory '/builds/xen/src/xen/tools/qemu-xen-build'
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Message-id: 20180405132046.4968-1-git@johnthomson.fastmail.com.au
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit d7d218ef02 attempted to change
dwProtocols to only advertise support for T=0 and not T=1. The change
was incorrect as it changed 0x00000003 to 0x00010000.
lsusb -v in a linux guest shows:
"dwProtocols 65536 (Invalid values detected)", though the
smart card could still be accessed. Windows 7 does not detect inserted
smart cards and logs the the following Error in the Event Logs:
Source: Smart Card Service
Event ID: 610
Smart Card Reader 'QEMU QEMU USB CCID 0' rejected IOCTL SET_PROTOCOL:
Incorrect function. If this error persists, your smart card or reader
may not be functioning correctly
Command Header: 03 00 00 00
Setting to 0x00000001 fixes the Windows issue.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-id: 20180420183219.20722-1-jandryuk@gmail.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
