The netmap.c file fails to build on FreeBSD with
net/netmap.c:95:9: warning: implicit declaration of function 'error_setg_errno' is invalid in C99 [-Wimplicit-function-declaration]
error_setg_errno(errp, errno, "Failed to nm_open() %s",
^
net/netmap.c:432:9: warning: implicit declaration of function 'error_propagate' is invalid in C99 [-Wimplicit-function-declaration]
error_propagate(errp, err);
^
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1459429690-6144-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The client sends messages to the server, not itself.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1459459222-8637-3-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To be safely portable no atomic access should be trying to do more than
the natural word width of the host. The most common abuse is trying to
atomically access 64 bit values on a 32 bit host.
This patch adds some QEMU_BUILD_BUG_ON to the __atomic instrinsic paths
to create a build failure if (sizeof(*ptr) > sizeof(void *)).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1459780549-12942-3-git-send-email-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As vm_clock_warp_start is a 64 bit value this causes problems for the
compiler trying to come up with a suitable atomic operation on 32 bit
hosts. Because the variable is protected by vm_clock_seqlock, we check its
value inside a seqlock critical section.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1459780549-12942-2-git-send-email-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The NBD protocol does not clearly document what will happen
if a client sends NBD_CMD_FLAG_FUA on NBD_CMD_FLUSH.
Historically, both the qemu and upstream NBD servers silently
ignored that flag, but that feels a bit risky. Meanwhile, the
qemu NBD client unconditionally sends the flag (without even
bothering to check whether the caller cares; at least with
NBD_CMD_WRITE the client only sends FUA if requested by a
higher layer).
There is ongoing discussion on the NBD list to fix the
protocol documentation to require that the server MUST ignore
the flag (unless the kernel folks can better explain what FUA
means for a flush), but until those doc improvements land, the
current nbd.git master was recently changed to reject the flag
with EINVAL (see nbd commit ab22e082), which now makes it
impossible for a qemu client to use FLUSH with an upstream NBD
server.
We should not send FUA with flush unless the upstream protocol
documents what it will do, and even then, it should be something
that the caller can opt into, rather than being unconditional.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1459526902-32561-1-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no memory_region_io(). And remove a stray '-'.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1459507677-16662-1-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only some callers of tcp_chr_new_client are putting the
socket client into non-blocking mode. Move the call to
qio_channel_set_blocking() into the tcp_chr_new_client
method to guarantee that all code paths set non-blocking
mode
Reported-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reported-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1458324041-22709-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some of the chardev I/O paths really want to write the
complete data buffer even though the channel is in
non-blocking mode. To achieve this they look for EAGAIN
and g_usleep() for 100ms. Unfortunately the code is set
to check errno == EAGAIN a second time, after the g_usleep()
call has completed. On OS-X at least, g_usleep clobbers
errno to ETIMEDOUT, causing the retry to be skipped.
This failure to retry means the full data isn't written
to the chardev backend, which causes various failures
including making the tests/ahci-test qtest hang.
Rather than playing games trying to reset errno just
simplify the code to use a goto to retry instead of a
a loop.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1459438168-8146-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The FreeBSD header files define the AI_V4MAPPED but its
implementation of getaddrinfo() always returns an error
when that flag is set. eg
address resolution failed for localhost:9000: Invalid value for ai_flags
There are also reports of the same problem on OS-X 10.6
Since AI_V4MAPPED is not critical functionality, if we
get an EAI_BADFLAGS error then just retry without the
AI_V4MAPPED flag set. Use a static var to cache this
status so we don't have to retry on every single call.
Also remove its use from the test suite since it serves
no useful purpose there.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1459786920-15961-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some occasions, a patch [1] can start with a hunk containing a
simple type cast. At the time annotate_values() is run, the type is
unknown and the cast type is misinterpreted as a identifier, resulting
in an error if it is followed with a negative value:
ERROR: spaces required around that '-' (ctx:WxV)
It seems complex to catch all possible types in a cast expression. So,
as a fallback solution, let's add some common qemu types to the
typeList array.
[1] http://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg06741.html
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Message-Id: <1459503606-31603-1-git-send-email-clg@fr.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM does not let you read or write this MSR if the corresponding CPUID
bit is not set. This in turn causes MSRs that come after MSR_TSC_AUX
to be ignored by KVM_SET_MSRS.
One visible symptom is that s3.flat from kvm-unit-tests fails with
CPUs that do not have RDTSCP, because the SMBASE is not reset to
0x30000 after reset.
Fixes: c9b8f6b621
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since f1060c55bf, the pointer is directly passed to
qemu_ram_free(). However, on initialization failure, it may be called
with a NULL pointer. Return immediately in this case.
This fixes a SEGV when memory initialization failed, for example
permission denied on open backing store /dev/hugepages, with -object
memory-backend-file,mem-path=/dev/hugepages.
Program received signal SIGSEGV, Segmentation fault.
0x00005555556e67e7 in qemu_ram_free (block=0x0) at /home/elmarco/src/qemu/exec.c:1775
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1459250451-29984-1-git-send-email-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- further collapse of the build matrix
- enabling MacOSX in the build
- make -j3 change
Other pending updates are deferred for later in the cycle.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXA4E9AAoJEPvQ2wlanipEH/EH+gNQRBmyHdnFGM5QwifRMP1+
UzQiciGP5TNE3Mk07Zsbl8mdyuHL+5+8NryzDB7j1Qxbveea/xV8gaOIpabntBjM
QQdNBGKJoYIj9HHm7oKlglS2lvwar+NK0/adHPL5PLR/FrLbC2BXAQwz46m4G8FO
vWRWzWJBwCVGrEgDf8Ih5RsmLEJeCkvd0C4SiikFROS7nxQt0V4YEqHAPMWUisIA
4EzsFSqRHpMVkCzaPYgyUganEdpkB6DnuBl8CgHGWBYp4BaqyD9EfzIHTLRRy07v
2dTDIxOB2uNgNUSU/vUYuQlrjmB05wg4K0/PYpbk6h2WvxJ2p0NpXPyWmszQN1s=
=v/pD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/travis-pull-05042016' into staging
This pull request includes:
- further collapse of the build matrix
- enabling MacOSX in the build
- make -j3 change
Other pending updates are deferred for later in the cycle.
# gpg: Signature made Tue 05 Apr 2016 10:11:25 BST using RSA key ID 5A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
* remotes/stsquad/tags/travis-pull-05042016:
.travis.yml: make -j3
.travis.yml: enable OSX builds
.travis.yml: collapse the test matrix
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The move from Travis VMs to Containers came with a upgrade from 1.5
cores to 2. The received wisdom is -j N+1 means a core can be doing work
while other threads wait for IO to complete. This is hard to test on the
Travis infrastructure but an initial before/after eyeballing seems to
confirm it is an improvement.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Travis has support for OSX builds. Making the setup work cleanly
involves a little hacking about with the .travis.yml file but rather
than make it too messy I've pushed all the "brew" install stuff into a
support script called ./scripts/macosx-brew.sh.
Currently only the default ./configure ${CONFIG} is built as I'm not
sure what extra coverage would come from the other build stanzas.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Remove the concept of TARGETS and build the complete target list for
each config combination. Now the matrix is just based on CONFIG stanzas
and we use the additional stuff for:
- things that only work on one compiler (sparse, gcov, gprof)
- combos where "make check" fails
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Three bugfixes for target-ppc, pseries machine type and related devices.
1. Fix a bug in the core code where kvm_vcpu_dirty would not be set
before the very first system reset. This meant that if things in
the reset path did their own cpu_synchronize_state() it would pull
stale data out of KVM.
On ppc this, in combination with a previous cleanup meant that the
MSR would be zeroed before entry, instead of correctly having the
SF (64-bit mode) bit set.
2. Allow immediate detach of hot-added PCI devices which haven't yet
been announced to the guest.
This fixes a regression: because of a case where we now defer
announcement of non-zero functions to the guest, an incorrect
hot-add of such a device can't be backed out until the add is
completed, which is counter-intuitive to say the least.
3. Fix migration of alternate interrupt locations. The location of
interrupt vectors can be affected by the LPCR, and we weren't
correctly recalculating this after migration of a non-standard LPCR
value.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aZBn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.6-20160405' into staging
ppc patch queue for 2016-03-24
Three bugfixes for target-ppc, pseries machine type and related devices.
1. Fix a bug in the core code where kvm_vcpu_dirty would not be set
before the very first system reset. This meant that if things in
the reset path did their own cpu_synchronize_state() it would pull
stale data out of KVM.
On ppc this, in combination with a previous cleanup meant that the
MSR would be zeroed before entry, instead of correctly having the
SF (64-bit mode) bit set.
2. Allow immediate detach of hot-added PCI devices which haven't yet
been announced to the guest.
This fixes a regression: because of a case where we now defer
announcement of non-zero functions to the guest, an incorrect
hot-add of such a device can't be backed out until the add is
completed, which is counter-intuitive to say the least.
3. Fix migration of alternate interrupt locations. The location of
interrupt vectors can be affected by the LPCR, and we weren't
correctly recalculating this after migration of a non-standard LPCR
value.
# gpg: Signature made Tue 05 Apr 2016 03:13:41 BST using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.6-20160405:
vl: Move cpu_synchronize_all_states() into qemu_system_reset()
spapr_drc: enable immediate detach for unsignalled devices
ppc: Rework POWER7 & POWER8 exception model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As the patches to move I/O throttling to BlockBackend didn't make it in
time for the 2.6 release, but the release adds new ways of configuring
VMs whose behaviour would change once the move is done, we need to
outlaw such configurations temporarily.
The problem exists whenever a BDS has more users than just its BB, for
example it is used as a backing file for another node. (This wasn't
possible in 2.5 yet as we introduced node references to specify a
backing file only recently.) In these cases, the throttling would
apply to these other users now, but after moving throttling to the
BlockBackend the other users wouldn't be throttled any more.
This patch prevents making new references to a throttled node as well as
using monitor commands to throttle a node with multiple parents.
Compared to 2.5 this changes behaviour in some corner cases where
references were allowed before, like bs->file or Quorum children. It
seems reasonable to assume that users didn't use I/O throttling on such
low level nodes. With the upcoming move of throttling into BlockBackend,
such configurations won't be possible anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Failing on -drive/drive_add created BlockBackends was a
requirement for x-blockdev-del, but it sneaked through
the patch review. Let's fix it now.
Example:
$ x86_64-softmmu/qemu-system-x86_64 -drive if=none,file=null-co://,id=null -qmp stdio
>> {'execute':'qmp_capabilities'}
<< {"return": {}}
>> {'execute':'x-blockdev-del','arguments':{'id':'null'}}
<< {"error": {"class": "GenericError", "desc": "Deleting block backend added with drive-add is not supported"}}
And without a DriveInfo:
>> { "execute": "blockdev-add", "arguments": { "options": { "driver":"null-co", "id":"null2"}}}
<< {"return": {}}
>> {'execute':'x-blockdev-del','arguments':{'id':'null2'}}
<< {"return": {}}
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are currently 3 calls to qemu_system_reset() in vl.c. Two of them
are immediately preceded by a cpu_synchronize_all_states9) and the
remaining one should be.
The one which doesn't is the very first reset called directly from main().
Without a cpu_synchronize_all_states(), kvm_vcpu_dirty is false at this
point from the earlier cpu_synchronize_all_post_init(). That's incorrect
because the reset path is quite likely to update the CPU state, and that
updated state should be pushed back to KVM, not overwritten with stale
data pushed to KVM immediately after init.
This patch moves the call to cpu_synchronize_all_states() into
qemu_system_reset() for safety, so it is always called. AFAICT this should
be safe for the handful of callers outside vl.c - these all appear to be in
places where the cpu state is already synchronized so the extra call
will be a no-op.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Currently spapr doesn't support "aborting" hotplug of PCI
devices by allowing device_del to immediately remove the
device if we haven't signalled the presence of the device
to the guest.
In the past this wasn't an issue, since we always immediately
signalled device attach and simply relied on full guest-aware
add->remove path for device removal. However, as of 788d259,
we now defer signalling for PCI functions until function 0
is attached, so now we need to deal with these "abort" operations
for cases where a user hotplugs a non-0 function, then opts to
remove it prior hotplugging function 0. Currently they'd have to
reboot before the unplug completed. PCIe multifunction hotplug
does not have this requirement however, so from a management
implementation perspective it would be good to address this within
the same release as 788d259.
We accomplish this by simply adding a 'signalled' flag to track
whether a device hotplug event has been sent to the guest. If it
hasn't, we allow immediate removal under the assumption that the
guest will not be using the device. Devices present at boot/reset
time are also assumed to be 'signalled'.
For CPU/memory/etc, signalling will still happen immediately
as part of device_add, so only PCI functions should be affected.
Cc: bharata@linux.vnet.ibm.com
Cc: david@gibson.dropbear.id.au
Cc: sbhat@linux.vnet.ibm.com
Cc: qemu-ppc@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[dwg: This fixes a regression where an incorrect hot-add of a non-zero
function can no longer be backed out until function 0 is added]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This patch fixes the current AIL implementation for POWER8. The
interrupt vector address can be calculated directly from LPCR when the
exception is handled. The excp_prefix update becomes useless and we
can cleanup the H_SET_MODE hcall.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: Removed LPES0/1 handling for HV vs. !HV
Fixed LPCR_ILE case for POWERPC_EXCP_POWER8 ]
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
[dwg: This was written as a cleanup, but it also fixes a real bug
where setting an alternative interrupt location would not be
correctly migrated]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* bcm2836: wire up CPU timer interrupts correctly
* linux-user: ignore EXCP_YIELD in ARM cpu_loop()
* target-arm: correctly reset SCTLR_EL3
* target-arm: remove incorrect ALIAS tags from ESR_EL2 and ESR_EL3
* target-arm: make the 64-bit version of VTCR do the migration
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8xY7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20160404' into staging
target-arm queue:
* bcm2836: wire up CPU timer interrupts correctly
* linux-user: ignore EXCP_YIELD in ARM cpu_loop()
* target-arm: correctly reset SCTLR_EL3
* target-arm: remove incorrect ALIAS tags from ESR_EL2 and ESR_EL3
* target-arm: make the 64-bit version of VTCR do the migration
# gpg: Signature made Mon 04 Apr 2016 17:42:16 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
* remotes/pmaydell/tags/pull-target-arm-20160404:
target-arm: Make the 64-bit version of VTCR do the migration
target-arm: Remove incorrect ALIAS tags from ESR_EL2 and ESR_EL3
target-arm: Correctly reset SCTLR_EL3 for 64-bit CPUs
linux-user: arm: Handle (ignore) EXCP_YIELD in ARM cpu_loop()
hw/arm/bcm2836: Wire up CPU timer interrupts correctly
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the ALIAS tag from VTCR_EL2 to VTCR so that we migrate the
64-bit version, as is usual. (This has no particular effect now
unless the guest wrote to the high RES0 bits of VTCR_EL2.)
Add a comment about why it's OK that we don't have the various
accessor functions that the EL1 TCR regdefs do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-id: 1459435778-5526-4-git-send-email-peter.maydell@linaro.org
The regdefs for the ESR_EL2 and ESR_EL3 system registers should not
be marked as ARM_CP_ALIAS, because these are the master copies; the
DFSR regdef in vmsa_pmsa_cp_reginfo[] is marked as an alias.
Remove the ALIAS tags so that these registers are correctly migrated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.rog>
Message-id: 1459435778-5526-3-git-send-email-peter.maydell@linaro.org
The regdef for SCTRL_EL3 was incorrectly marked as being an
ARM_CP_ALIAS, with the remark that this was because the 32-bit
definition would take care of reset and migration. However the
intention for banked registers as documented in the comment in
add_cpreg_to_hashtable() is:
* 2) If ARMv8 is enabled then we can count on a 64-bit version
* taking care of the secure bank. This requires that separate
* 32 and 64-bit definitions are provided.
and so it marks the 32-bit secure banked version as an alias.
This results in the sctlr_s/sctlr_el[3] field never being reset
or migrated for a 64-bit CPU with EL3 enabled.
Fix this by removing the ARM_CP_ALIAS annotation from SCTLR_EL3.
Since this means it now needs a real reset value, move the regdef
into the same place that we define the 32-bit SCTLR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-id: 1459435778-5526-2-git-send-email-peter.maydell@linaro.org
The new-in-ARMv8 YIELD instruction has been implemented to throw
an EXCP_YIELD back up to the QEMU main loop. In system emulation
we use this to decide to schedule a different guest CPU in SMP
configurations. In usermode emulation there is nothing to do,
so just ignore it and resume the guest.
This prevents an abort with "unhandled CPU exception 0x10004"
if the guest process uses the YIELD instruction.
Reported-by: Hunter Laux <hunterlaux@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1456833171-31900-1-git-send-email-peter.maydell@linaro.org
Wire up the CPU timer interrupts in the right order, with the
nonsecure physical timer on cntpnsirq, the hyp timer on cnthpirq,
and the secure physical timer on cntpsirq. (We did get the
virt timer right, at least.)
Reported-by: Antonio Huete Jiménez <tuxillo@quantumachine.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1458210790-6621-1-git-send-email-peter.maydell@linaro.org
The netmap.c file fails to build on FreeBSD with
net/netmap.c:95:9: warning: implicit declaration of function 'error_setg_errno' is invalid in C99 [-Wimplicit-function-declaration]
error_setg_errno(errp, errno, "Failed to nm_open() %s",
^
net/netmap.c:432:9: warning: implicit declaration of function 'error_propagate' is invalid in C99 [-Wimplicit-function-declaration]
error_propagate(errp, err);
^
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1459429690-6144-1-git-send-email-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow the user to select .cdr files in the file open dialog.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 32C964D4-3F17-47B7-AE7E-593E6BFD8855@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Indicate that autonegotiation is complete in the MII BMSR. This fixes
networking on xtfpga platform in linux v4.5.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and
IPv6-only network environments.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
While adding the IPv6 support, the commit eae303ff23
("slirp: Make Socket structure IPv6 compatible") changed the format of
the migration stream, without taking into account that we might still
receive an old migration stream layout when upgrading from QEMU version
2.5 (or older) to QEMU 2.6. Currently, QEMU bails out when doing a
migration from QEMU 2.5 to the recent master version when it has
been started with a "-net user,guestfwd=..." network. So let's fix
this by checking the version ID of the migration stream and by using
the old behavior if we've detected version 3 or less.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Mails to these e-mail addresses are rejected by the mail server
of Samsung with "User unknown" messages, so it seems like these
Exynos maintainers are no longer available.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1459341140-16892-1-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add Anthony Perard as Xen co-maintainer.
Update my email address.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Message-id: alpine.DEB.2.02.1603241131520.18380@kaball.uk.xensource.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Message-id: 1458743900-14742-1-git-send-email-sw@weilnetz.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There is no particular reason to keep these functions in the header.
Suggested by Paolo.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1458128212-4197-3-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The problem is that
virsh qemu-monitor-command --hmp VM log trace:help
forces QEMU to exit even when running VM normally.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1458128212-4197-2-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes commit ed7f5f1d8d.
Signed-off-by: Richard W.M. Jones.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1458507614-32470-1-git-send-email-rjones@redhat.com
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The options names were fixed in the qapi layer, but not in the command-line
options.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
parse_uint_full() used to be included from qemu-common.h but was moved
to qemu/cutils.h in commit f348b6d1a5
("util: move declarations out of qemu-common.h").
Cc: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1459341994-20567-3-git-send-email-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
