Add the necessary plumbing for the hv-balloon driver to the PC machine.
Co-developed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Now that the PIIX3 and PIIX4 device models are sufficiently prepared, their
implementations can be merged into one file for further consolidation.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-20-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The IDE controller is an integral part of PIIX3 (function 1). So create it as
part of the south bridge.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-12-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The "isapc" machine can also be run without VGA card, so there
is no need for a hard requirement with a "select" here - "imply"
is enough.
Message-Id: <20230512124033.502654-2-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The XEN_EMU option will cover core Xen support in target/, which exists
only for x86 with KVM today but could theoretically also be implemented
on Arm/Aarch64 and with TCG or other accelerators (if anyone wants to
run the gauntlet of struct layout compatibility, errno mapping, and the
rest of that fui).
It will also cover the support for architecture-independent grant table
and event channel support which will be added in hw/i386/kvm/ (on the
basis that the non-KVM support is very theoretical and making it not use
KVM directly seems like gratuitous overengineering at this point).
The XEN_BUS option is for the xenfv platform support, which will now be
used both by XEN_EMU and by real Xen.
The XEN option remains dependent on the Xen runtime libraries, and covers
support for real Xen. Some code which currently resides under CONFIG_XEN
will be moving to CONFIG_XEN_BUS over time as the direct dependencies on
Xen runtime libraries are eliminated. The Xen PCI platform device will
also reside under CONFIG_XEN_BUS.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
It's been deprecated since QEMU v6.2, so it should be OK to
finally remove this now.
Message-Id: <20230209161540.1054669-1-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
simplify build_append_pci_bus_devices() a bit by handling bridge
specific logic in bridge dedicated AcpiDevAmlIfClass::build_dev_aml
callback.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-30-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that all ACPI controllers select the ACPI and APM dependencies
themselves, these explicit dependencies became redundant. Remove them.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221216130355.41667-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
TYPE_PIIX4_PM is only used in machines where PIIX chipsets are used
which is currently PC and Malta. There is no point building it for the
other ACPI_X86 machines.
Note that this also removes unneeded ACPI_PIIX4 from PEGASOS2.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221216130355.41667-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Allow instantiating a virtio-iommu device by adding an ACPI Virtual I/O
Translation table (VIOT), which describes the relation between the
virtio-iommu and the endpoints it manages.
Add a hotplug handler for virtio-iommu on x86 and set the necessary
reserved region property. On x86, the [0xfee00000, 0xfeefffff] DMA
region is reserved for MSIs. DMA transactions to this range either
trigger IRQ remapping in the IOMMU or bypasses IOMMU translation.
Although virtio-iommu does not support IRQ remapping it must be informed
of the reserved region so that it can forward DMA transactions targeting
this region.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211026182024.2642038-5-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add new CONFIG_SGX for sgx support in the Qemu, and the Kconfig
default enable sgx in the i386 platform.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-32-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When building the 'microvm' machine stand-alone we get:
$ qemu-system-x86_64 -M microvm
**
ERROR:qom/object.c:714:object_new_with_type: assertion failed: (type != NULL)
Bail out! ERROR:qom/object.c:714:object_new_with_type: assertion failed: (type != NULL)
Aborted (core dumped)
Looking at the backtrace:
(gdb) bt
#3 0x00007ff2330492ff in g_assertion_message_expr () at /lib64/libglib-2.0.so.0
#4 0x000055a878c18341 in object_new_with_type (type=<optimized out>) at qom/object.c:714
#5 0x000055a878c18399 in object_new (typename=typename@entry=0x55a878dec36a "isa-pit") at qom/object.c:747
#6 0x000055a878cc8146 in qdev_new (name=name@entry=0x55a878dec36a "isa-pit") at hw/core/qdev.c:153
#7 0x000055a878a8b439 in isa_new (name=name@entry=0x55a878dec36a "isa-pit") at hw/isa/isa-bus.c:160
#8 0x000055a878adb782 in i8254_pit_init (base=64, isa_irq=0, alt_irq=0x0, bus=0x55a87ab38760) at include/hw/timer/i8254.h:54
#9 microvm_devices_init (mms=0x55a87ac36800) at hw/i386/microvm.c:263
#10 microvm_machine_state_init (machine=<optimized out>) at hw/i386/microvm.c:471
#11 0x000055a878a944ab in machine_run_board_init (machine=machine@entry=0x55a87ac36800) at hw/core/machine.c:1239
The "isa-pit" type (TYPE_I8254) is missing. Add it.
Fixes: 0ebf007dda ("hw/i386: Introduce the microvm machine type")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210616204328.2611406-24-philmd@redhat.com>
Introduce the X86_FW_OVMF Kconfig symbol for OVMF-specific code.
Move the OVMF-specific code from pc_sysfw.c to pc_sysfw_ovmf.c,
adding a pair of stubs.
Update MAINTAINERS to reach OVMF maintainers when these new
files are modified.
This fixes when building the microvm machine standalone:
/usr/bin/ld: libqemu-i386-softmmu.fa.p/target_i386_monitor.c.o: in
function `qmp_sev_inject_launch_secret':
target/i386/monitor.c:749: undefined reference to `pc_system_ovmf_table_find'
Fixes: f522cef9b3 ("sev: update sev-inject-launch-secret to make gpa optional")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210616204328.2611406-22-philmd@redhat.com>
Some machines use floppy controllers via the SysBus interface,
and don't need to pull in all the ISA code.
Extract the ISA specific code to a new unit: fdc-isa.c, and
add a new Kconfig symbol: "FDC_ISA".
This allows us to remove the FIXME from commit dd0ff8191a
("isa: express SuperIO dependencies with Kconfig").
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-5-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Per the kconfig.rst:
A device should be listed [...] ``imply`` if (depending on
the QEMU command line) the board may or may not be started
without it.
This is the case with the NVDIMM device, so use the 'imply'
weak reverse dependency to select the symbol.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210511155354.3069141-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To ease the PCI device addition in next patches, split the code as follows:
- generic code (read/write/setup) is being kept in pvpanic.c
- ISA dependent code moved to pvpanic-isa.c
Also, rename:
- ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE.
- TYPE_PVPANIC -> TYPE_PVPANIC_ISA.
- MemoryRegion io -> mr.
- pvpanic_ioport_* in pvpanic_*.
Update the build system with the new files and config structure.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Uses the existing gpex device which is also used as pcie host bridge on
arm/aarch64. For now only a 32bit mmio window and no ioport support.
It is disabled by default, use "-machine microvm,pcie=on" to enable.
ACPI support must be enabled too because the bus is declared in the
DSDT table.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-6-kraxel@redhat.com
$subject says all. Can be controlled using -M microvm,acpi=on/off.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-9-kraxel@redhat.com
Let's wire it up similar to virtio-pmem. Also disallow unplug, so it's
harder for users to shoot themselves into the foot.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-16-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's separate the compilation of tpm_tis_common.c from
the compilation of tpm_tis_isa.c
The common part will be also compiled along with the
tpm_tis_sysbus device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20200305165149.618-5-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
When configured with --without-default-devices, the build fails:
LINK x86_64-softmmu/qemu-system-x86_64
/usr/bin/ld: hw/i386/microvm.o: in function `microvm_devices_init':
hw/i386/microvm.c:157: undefined reference to `serial_hds_isa_init'
collect2: error: ld returned 1 exit status
make[1]: *** [Makefile:206: qemu-system-x86_64] Error 1
make: *** [Makefile:483: x86_64-softmmu/all] Error 2
While the MicroVM machine only uses the ISA serial port when the
MICROVM_MACHINE_ISA_SERIAL property is set, it has to be linked
with it. Replace the 'imply' Kconfig rule by a 'select'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191231183216.6781-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We moved all the PIIX3 southbridge code out of hw/pci-host/piix.c,
it now only contains i440FX northbridge code.
Rename it to match the chipset modelled.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Move all the PIIX3 functions to a new file: hw/isa/piix3.c.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
microvm is a machine type inspired by Firecracker and constructed
after its machine model.
It's a minimalist machine type without PCI nor ACPI support, designed
for short-lived guests. microvm also establishes a baseline for
benchmarking and optimizing both QEMU and guest operating systems,
since it is optimized for both boot time and footprint.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Pretty straightforward, just hook the current KCS and BT code into
the PCI system with the proper configuration.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: M: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
CONFIG_ACPI_PCI is a hard requirement of acpi-build.c, which is built
unconditionally for x86 target. Putting it in default-configs/ suggests
that it can be easily disabled, which isn't true.
Relocate the symbol with the other acpi-build.c requirements, under
'config PC'. This is similar to what is done for the arm 'virt' machine
type and CONFIG_ACPI_PCI
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-Id: <e73e6edff68fd30d69c6a1d02c9ef9192f773c63.1568049871.git.crobinso@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 97fd1ea8c1 broke the build for --without-default-devices as
VMMOUSE depends on VMPORT.
Fixes: 97fd1ea8c1
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
vmport device is not included when CONFIG_VMPORT is disabled, hence
QEMU fails with the following error:
`Unknown device 'vmport' for bus 'ISA': unknown.`
v2: imply VMPORT (Paolo Bonzini )
Signed-off-by: Julio Montes <julio.montes@intel.com>
Message-Id: <20190712160257.18270-1-julio.montes@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Override the device hotplug handler to properly handle the memory device
part via virtio-pmem-pci callbacks from the machine hotplug handler and
forward to the actual PCI bus hotplug handler.
As PCI hotplug has not been properly factored out into hotplug handlers,
most magic is performed in the (un)realize functions. Also some PCI host
buses don't have a PCI hotplug handler at all yet, just to be sure that
we alway have a hotplug handler on x86, add a simple error check.
Unlocking virtio-pmem will unlock virtio-pmem-pci.
Signed-off-by: David Hildenbrand <david@redhat.com>
[ Disable virtio-pmem hotunplug ]
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190619094907.10131-8-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some of our machines (like the ARM cubieboard) use CONFIG_AHCI for an AHCI
sysbus device, but do not use CONFIG_PCI since they do not feature a PCI
bus. With CONFIG_AHCI but without CONFIG_PCI, currently linking fails:
../hw/ide/ich.o: In function `pci_ich9_ahci_realize':
hw/ide/ich.c:124: undefined reference to `pci_allocate_irq'
hw/ide/ich.c:126: undefined reference to `pci_register_bar'
hw/ide/ich.c:128: undefined reference to `pci_register_bar'
hw/ide/ich.c:131: undefined reference to `pci_add_capability'
hw/ide/ich.c:147: undefined reference to `msi_init'
../hw/ide/ich.o: In function `pci_ich9_uninit':
hw/ide/ich.c:158: undefined reference to `msi_uninit'
../hw/ide/ich.o:(.data.rel+0x50): undefined reference to `vmstate_pci_device'
We must only compile ich.c if CONFIG_PCI is available, too, so introduce a
new config switch for this device.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When virtio-vga was added, the intention was to only support it for
those machines where the firmware does not know about virtio-gpu,
and supported VGA legacy hardware before virtio-{gpu,vga} were
introduced.
The Kconfig switch however enabled virtio-vga for all machines with
a PCI bus, and libvirt then prefers it even on hardware where
virtio-gpu would be preferrable. At least for now, only enable
virtio-vga for PC, hppa and pSeries machines, as was the case
before Kconfig dependencies were introduced.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes when configuring with CONFIG_PCI_DEVICES=n:
$ qemu-system-x86_64 -M q35
qemu-system-x86_64: Unsupported NIC model: e1000e
$ qemu-system-x86_64 -M pc
qemu-system-x86_64: Unsupported NIC model: e1000
Fixes: 7c28b925b7
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190316200818.8265-4-philmd@redhat.com>
CONFIG_I82374 is not needed for PC machines, since they create
i8257 directly instead.
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For the downstream distribution of QEMU, we want to compile without
CONFIG_PARALLEL. Commit 9157eee1b1 already moved the function
parallel_hds_isa_init() (which is still required for linking) into a file
that is included anyway, but commit bb3d5ea858 moved it
to a separate file which is only compiled again if CONFIG_PARALLEL is
set. To be able to link QEMU again without CONFIG_PARALLEL, the file
should be considered for linking for all targets that have CONFIG_ISA_BUS.
And while we're at it, add a proper comment in there with the rationale
for the separate file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1552297854-25847-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
%-softmmu.mak only keep boards definitions in Kconfig mode.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-43-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
remove default-configs/hyperv.mak and make dependencies
with Kconfig.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-41-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-38-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This way, the default-configs file only need to specify the boards
and any optional devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-37-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-36-yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.
The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig. One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script. This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Kconfig files were generated mostly with this script:
for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
shift
if test $# = 1; then
cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
bool
EOF
git add $(dirname $1)/Kconfig
else
echo $i $*
fi
done
sed -i '$d' hw/*/Kconfig
for i in hw/*; do
if test -d $i && ! test -f $i/Kconfig; then
touch $i/Kconfig
git add $i/Kconfig
fi
done
Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.
Kconfig.host and hw/Kconfig were created manually.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
