Commit Graph

1049 Commits

Author SHA1 Message Date
Luc Michel
502960ca04 hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexer
This simple mux sits between the PLL channels and the DSI0E and DSI0P
clock muxes. This mux selects between PLLA-DSI0 and PLLD-DSI0 channel
and outputs the selected signal to source number 4 of DSI0E/P clock
muxes. It is controlled by the cm_dsi0hsck register.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luc Michel <luc@lmichel.fr>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Luc Michel
fc9840850b hw/misc/bcm2835_cprman: implement clock mux behaviour
A clock mux can be configured to select one of its 10 sources through
the CM_CTL register. It also embeds yet another clock divider, composed
of an integer part and a fractional part. The number of bits of each
part is mux dependent.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Luc Michel
7281362484 hw/misc/bcm2835_cprman: add a clock mux skeleton implementation
The clock multiplexers are the last clock stage in the CPRMAN. Each mux
outputs one clock signal that goes out of the CPRMAN to the SoC
peripherals.

Each mux has at most 10 sources. The sources 0 to 3 are common to all
muxes. They are:
   0. ground (no clock signal)
   1. the main oscillator (xosc)
   2. "test debug 0" clock
   3. "test debug 1" clock

Test debug 0 and 1 are actual clock muxes that can be used as sources to
other muxes (for debug purpose).

Sources 4 to 9 are mux specific and can be unpopulated (grounded). Those
sources are fed by the PLL channels outputs.

One corner case exists for DSI0E and DSI0P muxes. They have their source
number 4 connected to an intermediate multiplexer that can select
between PLLA-DSI0 and PLLD-DSI0 channel. This multiplexer is called
DSI0HSCK and is not a clock mux as such. It is really a simple mux from
the hardware point of view (see https://elinux.org/The_Undocumented_Pi).
This mux is not implemented in this commit.

Note that there is some muxes for which sources are unknown (because of
a lack of documentation). For those cases all the sources are connected
to ground in this implementation.

Each clock mux output is exported by the CPRMAN at the qdev level,
adding the suffix '-out' to the mux name to form the output clock name.
(E.g. the 'uart' mux sees its output exported as 'uart-out' at the
CPRMAN level.)

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luc Michel <luc@lmichel.fr>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Luc Michel
9574581112 hw/misc/bcm2835_cprman: implement PLL channels behaviour
A PLL channel is able to further divide the generated PLL frequency.
The divider is given in the CTRL_A2W register. Some channels have an
additional fixed divider which is always applied to the signal.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luc Michel <luc@lmichel.fr>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Luc Michel
09d56bbc9b hw/misc/bcm2835_cprman: add a PLL channel skeleton implementation
PLLs are composed of multiple channels. Each channel outputs one clock
signal. They are modeled as one device taking the PLL generated clock as
input, and outputting a new clock.

A channel shares the CM register with its parent PLL, and has its own
A2W_CTRL register. A write to the CM register will trigger an update of
the PLL and all its channels, while a write to an A2W_CTRL channel
register will update the required channel only.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luc Michel <luc@lmichel.fr>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Luc Michel
6d2b874cf1 hw/misc/bcm2835_cprman: implement PLLs behaviour
The CPRMAN PLLs generate a clock based on a prescaler, a multiplier and
a divider. The prescaler doubles the parent (xosc) frequency, then the
multiplier/divider are applied. The multiplier has an integer and a
fractional part.

This commit also implements the CPRMAN CM_LOCK register. This register
reports which PLL is currently locked. We consider a PLL has being
locked as soon as it is enabled (on real hardware, there is a delay
after turning a PLL on, for it to stabilize).

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luc Michel <luc@lmichel.fr>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Luc Michel
1e986e25d0 hw/misc/bcm2835_cprman: add a PLL skeleton implementation
There are 5 PLLs in the CPRMAN, namely PLL A, C, D, H and B. All of them
take the xosc clock as input and produce a new clock.

This commit adds a skeleton implementation for the PLLs as sub-devices
of the CPRMAN. The PLLs are instantiated and connected internally to the
main oscillator.

Each PLL has 6 registers : CM, A2W_CTRL, A2W_ANA[0,1,2,3], A2W_FRAC. A
write to any of them triggers a call to the (not yet implemented)
pll_update function.

If the main oscillator changes frequency, an update is also triggered.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luc Michel <luc@lmichel.fr>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Luc Michel
fc14176ba2 hw/arm/raspi: add a skeleton implementation of the CPRMAN
The BCM2835 CPRMAN is the clock manager of the SoC. It is composed of a
main oscillator, and several sub-components (PLLs, multiplexers, ...) to
generate the BCM2835 clock tree.

This commit adds a skeleton of the CPRMAN, with a dummy register
read/write implementation. It embeds the main oscillator (xosc) from
which all the clocks will be derived.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luc Michel <luc@lmichel.fr>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Havard Skinnemoen
326ccfe240 hw/misc: Add npcm7xx random number generator
The RNG module returns a byte of randomness when the Data Valid bit is
set.

This implementation ignores the prescaler setting, and loads a new value
into RNGD every time RNGCS is read while the RNG is enabled and random
data is available.

A qtest featuring some simple randomness tests is included.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:10 +00:00
Hao Wu
7d378ed6e3 hw/timer: Adding watchdog for NPCM7XX Timer.
The watchdog is part of NPCM7XX's timer module. Its behavior is
controlled by the WTCR register in the timer.

When enabled, the watchdog issues an interrupt signal after a pre-set
amount of cycles, and issues a reset signal shortly after that.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: deleted blank line at end of npcm_watchdog_timer-test.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:01 +00:00
Philippe Mathieu-Daudé
435db7ebf5 hw/misc/mps2-scc: Use the LED device
Per the 'ARM MPS2 and MPS2+ FPGA Prototyping Boards Technical
Reference Manual' (100112_0200_07_en):

  2.1  Overview of the MPS2 and MPS2+ hardware

       The MPS2 and MPS2+ FPGA Prototyping Boards contain the
       following components and interfaces:

       * User switches and user LEDs:

         - Two green LEDs and two push buttons that connect to
           the FPGA.
         - Eight green LEDs and one 8-way dip switch that connect
           to the MCC.

Add the 8 LEDs connected to the MCC.

This replaces the 'mps2_scc_leds' trace events by the generic
'led_set_intensity' event.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-Id: <20200912134041.946260-7-f4bug@amsat.org>
2020-10-26 13:44:58 +01:00
Philippe Mathieu-Daudé
65ad1da23e hw/misc/mps2-fpgaio: Use the LED device
Per the 'ARM MPS2 and MPS2+ FPGA Prototyping Boards Technical
Reference Manual' (100112_0200_07_en):

  2.1  Overview of the MPS2 and MPS2+ hardware

       The MPS2 and MPS2+ FPGA Prototyping Boards contain the
       following components and interfaces:

       * User switches and user LEDs:

         - Two green LEDs and two push buttons that connect to
           the FPGA.
         - Eight green LEDs and one 8-way dip switch that connect
           to the MCC.

Add the 2 LEDs connected to the FPGA.

This replaces the 'mps2_fpgaio_leds' trace events by the generic
'led_set_intensity' event.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-Id: <20200912134041.946260-6-f4bug@amsat.org>
2020-10-26 13:44:58 +01:00
Philippe Mathieu-Daudé
4aef43991a hw/misc/led: Emit a trace event when LED intensity has changed
Track the LED intensity, and emit a trace event when it changes.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200912134041.946260-4-f4bug@amsat.org>
2020-10-26 13:44:58 +01:00
Philippe Mathieu-Daudé
ddb67f6402 hw/misc/led: Allow connecting from GPIO output
Some devices expose GPIO lines.

Add a GPIO qdev input to our LED device, so we can
connect a GPIO output using qdev_connect_gpio_out().

When used with GPIOs, the intensity can only be either
minium or maximum. This depends of the polarity of the
GPIO (which can be inverted).
Declare the GpioPolarity type to model the polarity.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-Id: <20200912134041.946260-3-f4bug@amsat.org>
2020-10-26 13:44:58 +01:00
Philippe Mathieu-Daudé
c1b2982627 hw/misc/led: Add a LED device
Add a LED device which can be connected to a GPIO output.
They can also be dimmed with PWM devices. For now we do
not implement the dimmed mode, but in preparation of a
future implementation, we start using the LED intensity.

LEDs are limited to a fixed set of colors.

Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200912134041.946260-2-f4bug@amsat.org>
2020-10-26 13:44:58 +01:00
Green Wan
51b6c1bbc3 hw/misc/sifive_u_otp: Add backend drive support
Add '-drive' support to OTP device. Allow users to assign a raw file
as OTP image.

test commands for 16k otp.img filled with zero:

$ dd if=/dev/zero of=./otp.img bs=1k count=16
$ ./qemu-system-riscv64 -M sifive_u -m 256M -nographic -bios none \
-kernel ../opensbi/build/platform/sifive/fu540/firmware/fw_payload.elf \
-d guest_errors -drive if=none,format=raw,file=otp.img

Signed-off-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201020033732.12921-3-green.wan@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-22 12:00:50 -07:00
Green Wan
a54d259157 hw/misc/sifive_u_otp: Add write function and write-once protection
- Add write operation to update fuse data bit when PWE bit is on.
 - Add array, fuse_wo, to store the 'written' status for all bits
   of OTP to block the write operation.

Signed-off-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-id: 20201020033732.12921-2-green.wan@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-22 12:00:46 -07:00
Mark Cave-Ayland
348b8d1a76 macio: don't reference serial_hd() directly within the device
Instead use qdev_prop_set_chr() to configure the ESCC serial chardevs at the
Mac Old World and New World machine level.

Also remove the now obsolete comment referring to the use of serial_hd() and
the setting of user_creatable to false accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20201013114922.2946-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-10-18 16:21:42 +01:00
Philippe Mathieu-Daudé
42a052333a hw/misc/mips_cpc: Start vCPU when powered on
In commit 102ca9667d we set "start-powered-off" on all vCPUs
included in the CPS (Coherent Processing System) but forgot to
start the vCPUS on when they are powered on in the CPC (Cluster
Power Controller).

This fixes the following tests:

  $ avocado run tests/acceptance/machine_mips_malta.py
   (1/3) test_mips_malta_i6400_framebuffer_logo_1core: PASS (3.67 s)
   (2/3) test_mips_malta_i6400_framebuffer_logo_7cores: INTERRUPTED: Test interrupted by SIGTERM (30.22 s)
   (3/3) test_mips_malta_i6400_framebuffer_logo_8cores: INTERRUPTED: Test interrupted by SIGTERM (30.25 s)
  RESULTS    : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 2 | CANCEL 0

Fixes: 102ca9667d ("mips/cps: Use start-powered-off CPUState property")
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201007113942.2523866-1-f4bug@amsat.org>
Message-Id: <20201007160038.26953-3-alex.bennee@linaro.org>
2020-10-09 17:27:55 +01:00
Peter Maydell
8c1c07929f Pull request
This includes the atomic_ -> qatomic_ rename that touches many files and is
 prone to conflicts.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAl9rcwsACgkQnKSrs4Gr
 c8hpqQf+OTxEVXMS/RfXRVjsM0RsgDYWyyW1OoA3/XEOt+OrJn4VrEbs7gbe3qxL
 rql73g1fysRSdoLBK1m4hJgZ2Ak5Bbwz26nnyA/quVZWKHqMXQaPTEQpJcGNvwiz
 WlZJvNLVkl3kTnM+eguad7TOoWfp9Uz/f/2Q8mbQ5Y9LZm3rEBZC2hG5KNJWRV1Y
 kdN6D1Y2l85LKd8219XChNCFJdj+ktGFQOIiWb8JG98shH2G+0rv9vhgYmat7qrh
 sSv2Ii+9ZGzxDCUYgpcSiu5CJVe3tqLBgzGnAKtohywGqzvdiZaHJJQipPn51W80
 YyaDuuMObLwzkSOcfxK7DPM8IuJQVg==
 =+5d4
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

This includes the atomic_ -> qatomic_ rename that touches many files and is
prone to conflicts.

# gpg: Signature made Wed 23 Sep 2020 17:08:43 BST
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  qemu/atomic.h: rename atomic_ to qatomic_
  tests: add test-fdmon-epoll
  fdmon-poll: reset npfd when upgrading to fdmon-epoll
  gitmodules: add qemu.org vbootrom submodule
  gitmodules: switch to qemu.org meson mirror
  gitmodules: switch to qemu.org qboot mirror
  docs/system: clarify deprecation schedule
  virtio-crypto: don't modify elem->in/out_sg
  virtio-blk: undo destructive iov_discard_*() operations
  util/iov: add iov_discard_undo()
  virtio: add vhost-user-fs-ccw device
  libvhost-user: handle endianness as mandated by the spec
  MAINTAINERS: add Stefan Hajnoczi as block/nvme.c maintainer

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-24 18:48:45 +01:00
Stefan Hajnoczi
d73415a315 qemu/atomic.h: rename atomic_ to qatomic_
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:

  $ CC=clang CXX=clang++ ./configure ... && make
  ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)

Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.

This patch was generated using:

  $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
    sort -u >/tmp/changed_identifiers
  $ for identifier in $(</tmp/changed_identifiers); do
        sed -i "s%\<$identifier\>%q$identifier%g" \
            $(git grep -I -l "\<$identifier\>")
    done

I manually fixed line-wrap issues and misaligned rST tables.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-09-23 16:07:44 +01:00
Daniel P. Berrangé
efba15959c qom: simplify object_find_property / object_class_find_property
When debugging QEMU it is often useful to put a breakpoint on the
error_setg_internal method impl.

Unfortunately the object_property_add / object_class_property_add
methods call object_property_find / object_class_property_find methods
to check if a property exists already before adding the new property.

As a result there are a huge number of calls to error_setg_internal
on startup of most QEMU commands, making it very painful to set a
breakpoint on this method.

Most callers of object_find_property and object_class_find_property,
however, pass in a NULL for the Error parameter. This simplifies the
methods to remove the Error parameter entirely, and then adds some
new wrapper methods that are able to raise an Error when needed.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200914135617.1493072-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-22 16:45:16 -04:00
Eduardo Habkost
8063396bf3 Use OBJECT_DECLARE_SIMPLE_TYPE when possible
This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
  --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18 14:12:32 -04:00
Eduardo Habkost
a489d1951c Use OBJECT_DECLARE_TYPE when possible
This converts existing DECLARE_OBJ_CHECKERS usage to
OBJECT_DECLARE_TYPE when possible.

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=AddObjectDeclareType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-5-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18 14:12:32 -04:00
Joel Stanley
204dab83fe misc: aspeed_scu: Update AST2600 silicon id register
Aspeed have released an updated datasheet (v7) containing the silicon id
for the AST2600 A2. It looks like this:

              SCU004      SCU014
  AST2600-A0  0x05000303  0x05000303
  AST2600-A1  0x05010303  0x05010303
  AST2600-A2  0x05010303  0x05020303
  AST2620-A1  0x05010203  0x05010203
  AST2620-A2  0x05010203  0x05020203

The SCU004 (silicon id 1) value matches SCU014 for A0, but for
subsequent revisions it is hard coded to the A1 value.

Qemu effectively dropped support for the A0 in 7582591ae7 ("aspeed:
Support AST2600A1 silicon revision") as the A0 reset table was removed,
so it makes sense to only support the behaviour of A1 and onwards.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200916082012.776628-1-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-09-18 09:04:36 +02:00
Havard Skinnemoen
e331f79eb8 hw/misc: Add NPCM7xx Clock Controller device model
Enough functionality to boot the Linux kernel has been implemented. This
includes:

  - Correct power-on reset values so the various clock rates can be
    accurately calculated.
  - Clock enables stick around when written.

In addition, a best effort attempt to implement SECCNT and CNTR25M was
made even though I don't think the kernel needs them.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-3-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:24:58 +01:00
Havard Skinnemoen
e5a7ba8788 hw/misc: Add NPCM7xx System Global Control Registers device model
Implement a device model for the System Global Control Registers in the
NPCM730 and NPCM750 BMC SoCs.

This is primarily used to enable SMP boot (the boot ROM spins reading
the SCRPAD register) and DDR memory initialization; other registers are
best effort for now.

The reset values of the MDLR and PWRON registers are determined by the
SoC variant (730 vs 750) and board straps respectively.

Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-2-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:24:15 +01:00
Philippe Mathieu-Daudé
ae689ad7a8 hw/misc/a9scu: Report unimplemented accesses with qemu_log_mask(UNIMP)
Report unimplemented register accesses using qemu_log_mask(UNIMP).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200901144100.116742-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:23:19 +01:00
Philippe Mathieu-Daudé
9d8e61918f hw/misc/a9scu: Simplify setting MemoryRegionOps::impl fields
This model implementation is designed for 32-bit accesses.
We can simplify setting the MemoryRegionOps::impl min/max
fields to 32-bit (memory::access_with_adjusted_size() will
take care of the 8/16-bit accesses).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200901144100.116742-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:23:19 +01:00
Philippe Mathieu-Daudé
7b56d1f4ae hw/misc/a9scu: Simplify setting MemoryRegionOps::valid fields
Per the datasheet (DDI0407 r2p0):

  "All SCU registers are byte accessible" and are 32-bit aligned.

Set MemoryRegionOps::valid min/max fields and simplify the write()
handler.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200901144100.116742-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:23:19 +01:00
Philippe Mathieu-Daudé
14a560359d hw/misc/a9scu: Do not allow invalid CPU count
Per the datasheet (DDI0407 r2p0):

  "The SCU connects one to four Cortex-A9 processors to
   the memory system through the AXI interfaces."

Change the instance_init() handler to a device_realize()
one so we can verify the property is in range, and return
an error to the caller if not.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200901144100.116742-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:23:19 +01:00
Peter Maydell
f00f57f344 This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap causes
  - Allows 16-bit writes to the SiFive test device. This fixes the
    failure to reboot the RISC-V virt machine
  - Support for the Microchip PolarFire SoC and Icicle Kit
  - A reafactor of RISC-V code out of hw/riscv
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl9aa4YACgkQIeENKd+X
 cFTJjgf5ASfFIO5HqP1l80/UM5Pswyq0IROZDq0ItZa6U4EPzLXoE2N0POriIj4h
 Ds2JbMg0ORDqY0VbSxHlgYHMgJ9S6cuVOMnATsPG0d2jaJ3gSxLBu5k/1ENqe+Vw
 sSYXZv5uEAUfOFz99zbuhKHct5HzlmBFW9dVHdflUQS+cRgsSXq27mz1BvZ8xMWl
 lMhwubqdoNx0rOD3vKnlwrxaf54DcJ2IQT3BtTCjEar3tukdNaLijAuwt2hrFyr+
 IwpeFXA/NWar+mXP3M+BvcLaI33j73/ac2+S5SJuzHGp/ot5nT5gAuq3PDEjHMeS
 t6z9Exp776VXxNE2iUA5NB65Yp3/6w==
 =07oA
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging

This PR includes multiple fixes and features for RISC-V:
 - Fixes a bug in printing trap causes
 - Allows 16-bit writes to the SiFive test device. This fixes the
   failure to reboot the RISC-V virt machine
 - Support for the Microchip PolarFire SoC and Icicle Kit
 - A reafactor of RISC-V code out of hw/riscv

# gpg: Signature made Thu 10 Sep 2020 19:08:06 BST
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits)
  hw/riscv: Sort the Kconfig options in alphabetical order
  hw/riscv: Drop CONFIG_SIFIVE
  hw/riscv: Always build riscv_hart.c
  hw/riscv: Move sifive_test model to hw/misc
  hw/riscv: Move sifive_uart model to hw/char
  hw/riscv: Move riscv_htif model to hw/char
  hw/riscv: Move sifive_plic model to hw/intc
  hw/riscv: Move sifive_clint model to hw/intc
  hw/riscv: Move sifive_gpio model to hw/gpio
  hw/riscv: Move sifive_u_otp model to hw/misc
  hw/riscv: Move sifive_u_prci model to hw/misc
  hw/riscv: Move sifive_e_prci model to hw/misc
  hw/riscv: sifive_u: Connect a DMA controller
  hw/riscv: clint: Avoid using hard-coded timebase frequency
  hw/riscv: microchip_pfsoc: Hook GPIO controllers
  hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs
  hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
  hw/net: cadence_gem: Add a new 'phy-addr' property
  hw/riscv: microchip_pfsoc: Connect a DMA controller
  hw/dma: Add SiFive platform DMA controller emulation
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/riscv/trace-events
2020-09-13 20:29:35 +01:00
Peter Maydell
f4ef8c9cc1 QOM boilerplate cleanup
Documentation build fix:
 * memory: Remove kernel-doc comment marker (Eduardo Habkost)
 
 QOM cleanups:
 * Rename QOM macros for consistency between
   TYPE_* and type checking constants (Eduardo Habkost)
 
 QOM new macros:
 * OBJECT_DECLARE_* and OBJECT_DEFINE_* macros (Daniel P. Berrangé)
 * DECLARE_*_CHECKER macros (Eduardo Habkost)
 
 Automated QOM boilerplate changes:
 * Automated changes to use DECLARE_*_CHECKER (Eduardo Habkost
 * Automated changes to use OBJECT_DECLARE* (Eduardo Habkost)
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEWjIv1avE09usz9GqKAeTb5hNxaYFAl9abc0UHGVoYWJrb3N0
 QHJlZGhhdC5jb20ACgkQKAeTb5hNxaYU9Q/8CyK1w2SlItxBhos7zojqnZ9TP1Jt
 b1YCApQJ+bKSPAUDyefajQA0D9HeR9bFlreiOprQnmZWOqeOvnRIxNGvelJRqRRu
 KcIA5DIfVMJRkKJQEXairrGdnPmFLWSLEb7AmwxyAhp5G51PCP/3kbudi3T/vrNr
 OaccUejs5UgImPfO8Fm+0zqZPmblq/xmtU0p77FvDxGNFPPG8ddpu7eKksGD7FYd
 5bTJTtUhONYG9EJMUD2TBxnJoy1pi6AYUu4+2T211RpBcxeiyNSSitI8fZTk6BGl
 33VwQib9SXjGaE8VsSvHDHhLLec7sqqr2JH3rfvyKF6BOptKWzmSzFdbo2mrRkSy
 8jfCImQgTBBMAHBWP+MFTeKuzfhikZx2DbBLzpppHMMvCca6Zc+oYgR2FbVwuPsw
 H2YL+8Wx4Ws6RXe147toNDRbv75vnS7F3fU800Pcur5VHJWTgSpT/tggzmVPWsdU
 GeUgceYlXyVk5/fC89ZhhtD9eurfBSzQR4eN7/nie2wD6PFMpZkOjHwLn40uWsyq
 xRO0F4uYghNU1N8z6NBhEYLTBtEcS1HFEisSLQrnTQH9W0I7mBx3MaZib/uK7NLC
 b2gT0hossTT8Z46Z8ynoZarwO5EquAMWEQtc9hfZGWacrQEpjVm2DMYMfu83krWb
 xhgl+mpKqVasAPk=
 =RjXc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM boilerplate cleanup

Documentation build fix:
* memory: Remove kernel-doc comment marker (Eduardo Habkost)

QOM cleanups:
* Rename QOM macros for consistency between
  TYPE_* and type checking constants (Eduardo Habkost)

QOM new macros:
* OBJECT_DECLARE_* and OBJECT_DEFINE_* macros (Daniel P. Berrangé)
* DECLARE_*_CHECKER macros (Eduardo Habkost)

Automated QOM boilerplate changes:
* Automated changes to use DECLARE_*_CHECKER (Eduardo Habkost
* Automated changes to use OBJECT_DECLARE* (Eduardo Habkost)

# gpg: Signature made Thu 10 Sep 2020 19:17:49 BST
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request: (33 commits)
  virtio-vga: Use typedef name for instance_size
  vhost-user-vga: Use typedef name for instance_size
  xilinx_axienet: Use typedef name for instance_size
  lpc_ich9: Use typedef name for instance_size
  omap_intc: Use typedef name for instance_size
  xilinx_axidma: Use typedef name for instance_size
  tusb6010: Rename TUSB to TUSB6010
  pc87312: Rename TYPE_PC87312_SUPERIO to TYPE_PC87312
  vfio: Rename PCI_VFIO to VFIO_PCI
  usb: Rename USB_SERIAL_DEV to USB_SERIAL
  sabre: Rename SABRE_DEVICE to SABRE
  rs6000_mc: Rename RS6000MC_DEVICE to RS6000MC
  filter-rewriter: Rename FILTER_COLO_REWRITER to FILTER_REWRITER
  esp: Rename ESP_STATE to ESP
  ahci: Rename ICH_AHCI to ICH9_AHCI
  vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENID
  vfio: Rename VFIO_AP_DEVICE_TYPE to TYPE_VFIO_AP_DEVICE
  dev-smartcard-reader: Rename CCID_DEV_NAME to TYPE_USB_CCID_DEV
  ap-device: Rename AP_DEVICE_TYPE to TYPE_AP_DEVICE
  gpex: Fix type checking function name
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 19:26:51 +01:00
Bin Meng
a4b84608ba hw/riscv: Move sifive_test model to hw/misc
This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_test model to hw/misc directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-10-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09 15:54:19 -07:00
Bin Meng
0fa9e32945 hw/riscv: Move sifive_u_otp model to hw/misc
This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_u_otp model to hw/misc directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-4-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09 15:54:19 -07:00
Bin Meng
9fe640a53d hw/riscv: Move sifive_u_prci model to hw/misc
This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_u_prci model to hw/misc directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-3-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09 15:54:19 -07:00
Bin Meng
89ece6f76f hw/riscv: Move sifive_e_prci model to hw/misc
This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_e_prci model to hw/misc directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-2-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09 15:54:19 -07:00
Markus Armbruster
b15e402fc8 trace-events: Fix attribution of trace points to source
Some trace points are attributed to the wrong source file.  Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.

Clean up with help of scripts/cleanup-trace-events.pl.  Funnies
requiring manual post-processing:

* accel/tcg/cputlb.c trace points are in trace-events.

* block.c and blockdev.c trace points are in block/trace-events.

* hw/block/nvme.c uses the preprocessor to hide its trace point use
  from cleanup-trace-events.pl.

* hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to
  guard debug code.

* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.

* linux-user/trace-events abbreviates a tedious list of filenames to
  */signal.c.

* net/colo-compare and net/filter-rewriter.c use pseudo trace points
  colo_compare_miscompare and colo_filter_rewriter_debug to guard
  debug code.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806141334.3646302-5-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-09-09 17:17:58 +01:00
Markus Armbruster
6ec9379870 trace-events: Delete unused trace points
Tracked down with the help of scripts/cleanup-trace-events.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20200806141334.3646302-4-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-09-09 17:17:02 +01:00
Eduardo Habkost
8110fa1d94 Use DECLARE_*CHECKER* macros
Generated using:

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-12-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-13-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09 09:27:09 -04:00
Eduardo Habkost
db1015e92e Move QOM typedefs and add missing includes
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.

Patch generated using:

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')

which will split "typdef struct { ... } TypedefName"
declarations.

Followed by:

 $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
    $(git grep -l '' -- '*.[ch]')

which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09 09:26:43 -04:00
Peter Maydell
3dd23a4fb8 Various fixes of Aspeed machines :
* New Supermicro X11 BMC machine (Erik)
 * Fixed valid access size on AST2400 SCU
 * Improved robustness of the ftgmac100 model.
 * New flash models in m25p80 (Igor)
 * Fixed reset sequence of SDHCI/eMMC controllers
 * Improved support of the AST2600 SDMC  (Joel)
 * Couple of SMC cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAl9OQPgACgkQUaNDx8/7
 7KHzsRAAmXw6963D3wIuE2Nzb1G5Zvn6nup3AsF5Xs1IZU/cLqNijiz220KslFtQ
 y8KrTO/eyBmAsEjrg1f6bWwCTZsouKq/2vWPtmTx3eU4HgeJdPbkln7E1YGmMfBR
 T4WJU6mNqkWfFT3WAW3IbB4qCoH3l0DRkgawYPWbdJmTs5CBtXOYCT14TijDVWQ5
 p8S4QjTtfRPwG9csHJ1W93t8jadTzderefkN6Zcmf9y6iOCif6SVDFvF769hzg6e
 Pzp3xxRV3ewxhSLrGdCK+fQk/IcPaLVUnh+mM3mGLk2rDQoomFXBpaz1N94rw43s
 lGuIyLkUGiHbgONmlZMXj03WWQbgGqjYpDWme1rAKJSX6CRJRixucejsRFTG5Evx
 odgY1MGNrdg0K8L0O1SQEx7O+URZZO68WrtrMTwLbOHErE7pWAR+h5RqzclwMr3v
 0hwQxDeNjhDBj+nUwoPUjXsgfVafzeywFfKuMymnygGog5hFSWiqAFIqyxj+u6YI
 HUG8kMHdLqzAgX1NWAomn2cxUEc4Q2wxDlzUgvjcvBwa6HZD+3nrjMRStHTmeVy5
 yPKWmRanXH6xIUJoRd2dMEU6SrwGjmjfnKAbG3vgxJ6B5sk4BrfKOFeaCF9M2zP6
 ZePWf6XrsPQY7aZgQRTexmXK83jqn73DOkavI2pM9s/6Ts61mdc=
 =ZQHA
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20200901' into staging

Various fixes of Aspeed machines :

* New Supermicro X11 BMC machine (Erik)
* Fixed valid access size on AST2400 SCU
* Improved robustness of the ftgmac100 model.
* New flash models in m25p80 (Igor)
* Fixed reset sequence of SDHCI/eMMC controllers
* Improved support of the AST2600 SDMC  (Joel)
* Couple of SMC cleanups

# gpg: Signature made Tue 01 Sep 2020 13:39:20 BST
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* remotes/legoater/tags/pull-aspeed-20200901:
  hw: add a number of SPI-flash's of m25p80 family
  arm: aspeed: add strap define `25HZ` of AST2500
  aspeed/smc: Open AHB window of the second chip of the AST2600 FMC controller
  aspeed/sdmc: Simplify calculation of RAM bits
  aspeed/sdmc: Allow writes to unprotected registers
  aspeed/sdmc: Perform memory training
  ftgmac100: Improve software reset
  ftgmac100: Fix integer overflow in ftgmac100_do_tx()
  ftgmac100: Check for invalid len and address before doing a DMA transfer
  ftgmac100: Change interrupt status when a DMA error occurs
  ftgmac100: Fix interrupt status "Packet moved to RX FIFO"
  ftgmac100: Fix interrupt status "Packet transmitted on ethernet"
  ftgmac100: Fix registers that can be read
  aspeed/sdhci: Fix reset sequence
  aspeed/smc: Fix max_slaves of the legacy SMC device
  aspeed/smc: Fix MemoryRegionOps definition
  hw/arm/aspeed: Add board model for Supermicro X11 BMC
  aspeed/scu: Fix valid access size on AST2400
  m25p80: Add support for n25q512ax3
  m25p80: Return the JEDEC ID twice for mx25l25635e

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-03 14:12:48 +01:00
Eduardo Habkost
9db70dac85 mos6522: Rename QOM macros
Rename the MOS6522_DEVICE_CLASS and MOS6522_DEVICE_GET_CLASS
macros to be consistent with the TYPE_MOS6522 and MOS6522 macros.

This will make future conversion to OBJECT_DECLARE* easier.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-46-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-02 07:29:25 -04:00
Eduardo Habkost
fed163c987 imx_ccm: Rename IMX_GET_CLASS macro
Rename it to IMX_CCM_GET_CLASS to be consistent with the existing
IMX_CCM and IXM_CCM_CLASS macro.

This will make future conversion to OBJECT_DECLARE* easier.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-45-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-02 07:29:25 -04:00
Graeme Gregory
dccb92b5ca hw/misc/sbsa_ec : Add an embedded controller for sbsa-ref
A difference between sbsa platform and the virt platform is PSCI is
handled by ARM-TF in the sbsa platform. This means that the PSCI code
there needs to communicate some of the platform power changes down
to the qemu code for things like shutdown/reset control.

Space has been left to extend the EC if we find other use cases in
future where ARM-TF and qemu need to communicate.

Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Tested-by: Leif Lindholm <leif@nuviainc.com>
Message-id: 20200826141952.136164-2-graeme@nuviainc.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-01 14:01:12 +01:00
Cédric Le Goater
9951133e46 aspeed/sdmc: Simplify calculation of RAM bits
Changes in commit 533eb415df ("arm/aspeed: actually check RAM size")
introduced a 'valid_ram_sizes' array which can be used to compute the
associated bit field value encoding the RAM size. The field is simply
the index of the array.

Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-19-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-09-01 14:21:51 +02:00
Joel Stanley
57de884d55 aspeed/sdmc: Allow writes to unprotected registers
A subset of registers are not protected by the lock behaviour, so allow
unconditionally writing to those.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-18-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-09-01 14:21:51 +02:00
Joel Stanley
14c179541b aspeed/sdmc: Perform memory training
This allows qemu to run the "normal" power on reset boot path through
u-boot, where the DDR is trained.

An enhancement would be to have the SCU bit stick across qemu reboots,
but be unset on initial boot.

Proper modelling would be to discard all writes to the phy setting regs
at offset 0x100 - 0x400 and to model the phy status regs at offset
0x400.

The status regs model would only need to account for offets 0x00,
0x50, 0x68 and 0x7c.

Signed-off-by: Joel Stanley <joel@jms.id.au>
[ clg: checkpatch fixes ]
Message-Id: <20200819100956.2216690-17-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-09-01 14:21:51 +02:00
Cédric Le Goater
740bc3a7e6 aspeed/scu: Fix valid access size on AST2400
The read access size of the SCU registers can be 1/2/4 bytes and write
is 4 bytes and all Aspeed models would need a .valid.accepts() handler.

For the moment, set the min access size to 1 byte to cover both read
and write operations on the AST2400 but keep the min access size of
the other SoCs to 4 bytes as this is an unusual access size.

This fixes support for some old firmware doing 2 bytes reads on the
AST2400 SoC.

Reported-by: Erik Smit <erik.lucas.smit@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-09-01 14:21:50 +02:00
Peter Maydell
ea1bb830cb target-arm queue:
* target/arm: Cleanup and refactoring preparatory to SVE2
  * armsse: Define ARMSSEClass correctly
  * hw/misc/unimp: Improve information provided in log messages
  * hw/qdev-clock: Avoid calling qdev_connect_clock_in after DeviceRealize
  * hw/arm/xilinx_zynq: Call qdev_connect_clock_in() before DeviceRealize
  * hw/net/allwinner-sun8i-emac: Use AddressSpace for DMA transfers
  * hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers
  * target/arm: Fill in the WnR syndrome bit in mte_check_fail
  * target/arm: Clarify HCR_EL2 ARMCPRegInfo type
  * hw/arm/musicpal: Use AddressSpace for DMA transfers
  * hw/clock: Minor cleanups
  * hw/arm/sbsa-ref: fix typo breaking PCIe IRQs
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl9IzPYZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3u0ND/9BvrjVquzqD83keJkZe8e1
 txQK2bdHHili/kGoJRXeWdca5wtmlKMcHUw5dUHfgUrQo3p3hDw2P0jWB39Pqbz4
 Uoc1M1fMMckV/wygpRIXzB6Y6+kTOc3E+xY+6xreXQHNl/Fv+nkATVwbHX1rKxcg
 SGIyjHRB8DiiQ8s1Szhyr6+jr/FVN5xHHHt+DSArYoM0UoXNyzzdrUzcTA1c5AfS
 lBH5Slz+rLLHoN1rmycb//X1CZ+hAv0jZl9O8+70S1aOLIuin3YewEBDfV+sEo88
 P9qfhdRer1j/HwRa00R30g86z2FgoSFqyewX96SetuhoUz4EH8TZb5NIpKWONbai
 PhWl4Bul6xXS051AARoewbNcXZ9scFXNc4BYQEW4EkTgX3J2AekN3m8HncuoNWAm
 w8MEFgGKDqD/CoAKTNHtZKnP8Iwz/8widGjFe86bzzBsM2OWi7VT+ApdSxtom95z
 5CNFpQDPGc7p4hDgGPXR3pvuRSbOT04E/rs4JF7R9TQAFWDESPWSyi3HvULFTC+Y
 7W4iwSl0WNXLUGoZTIZ4EIf6MaGVRcjJNWWb4dXpZzN9c13o70uknRGu+kma08Ic
 kZO3jF/W1tFEsAeI+hJeTQk7oEFn7YL8S7D6X+77sdy9JI8Csr6rqHUBJmcMIaJJ
 78vsbH079zJbuVIV2f3p6g==
 =YCxD
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200828' into staging

target-arm queue:
 * target/arm: Cleanup and refactoring preparatory to SVE2
 * armsse: Define ARMSSEClass correctly
 * hw/misc/unimp: Improve information provided in log messages
 * hw/qdev-clock: Avoid calling qdev_connect_clock_in after DeviceRealize
 * hw/arm/xilinx_zynq: Call qdev_connect_clock_in() before DeviceRealize
 * hw/net/allwinner-sun8i-emac: Use AddressSpace for DMA transfers
 * hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers
 * target/arm: Fill in the WnR syndrome bit in mte_check_fail
 * target/arm: Clarify HCR_EL2 ARMCPRegInfo type
 * hw/arm/musicpal: Use AddressSpace for DMA transfers
 * hw/clock: Minor cleanups
 * hw/arm/sbsa-ref: fix typo breaking PCIe IRQs

# gpg: Signature made Fri 28 Aug 2020 10:23:02 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200828: (35 commits)
  target/arm: Convert sq{, r}dmulh to gvec for aa64 advsimd
  target/arm: Convert integer multiply-add (indexed) to gvec for aa64 advsimd
  target/arm: Convert integer multiply (indexed) to gvec for aa64 advsimd
  target/arm: Generalize inl_qrdmlah_* helper functions
  target/arm: Tidy SVE tszimm shift formats
  target/arm: Split out gen_gvec_ool_zz
  target/arm: Split out gen_gvec_ool_zzz
  target/arm: Split out gen_gvec_ool_zzp
  target/arm: Merge helper_sve_clr_* and helper_sve_movz_*
  target/arm: Split out gen_gvec_ool_zzzp
  target/arm: Use tcg_gen_gvec_bitsel for trans_SEL_pppp
  target/arm: Clean up 4-operand predicate expansion
  target/arm: Merge do_vector2_p into do_mov_p
  target/arm: Rearrange {sve,fp}_check_access assert
  target/arm: Split out gen_gvec_fn_zzz, do_zzz_fn
  target/arm: Split out gen_gvec_fn_zz
  qemu/int128: Add int128_lshift
  armsse: Define ARMSSEClass correctly
  hw/misc/unimp: Display the offset with width of the region size
  hw/misc/unimp: Display the value with width of the access size
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28 15:14:40 +01:00
Philippe Mathieu-Daudé
55d35c8819 hw/misc/unimp: Display the offset with width of the region size
To have a better idea of how big is the region where the offset
belongs, display the value with the width of the region size
(i.e. a region of 0x1000 bytes uses 0x000 format).

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200812190206.31595-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28 10:02:46 +01:00
Philippe Mathieu-Daudé
a12b4c53cb hw/misc/unimp: Display the value with width of the access size
To quickly notice the access size, display the value with the
width of the access (i.e. 16-bit access is displayed 0x0000,
while 8-bit access 0x00).

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200812190206.31595-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28 10:02:46 +01:00
Philippe Mathieu-Daudé
68274b945e hw/misc/unimp: Display value after offset
To better align the read/write accesses, display the value after
the offset (read accesses only display the offset).

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200812190206.31595-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28 10:02:46 +01:00
Eduardo Habkost
cb8cf86b3e auxbus: Move QOM macros to header
This will make future conversion to OBJECT_DECLARE* easier.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-By: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200825192110.3528606-38-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27 14:04:55 -04:00
Marc-André Lureau
721cdcae73 meson: convert hw/misc
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:30:29 -04:00
Paolo Bonzini
243af0225a trace: switch position of headers to what Meson requires
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path.  In particular the tracing headers are using
$(build_root)/$(<D).

In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".

This patch is too ugly to be applied to the Makefiles now.  It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:18:24 -04:00
Philippe Mathieu-Daudé
ca05a240d4 hw/misc/aspeed_sdmc: Fix incorrect memory size
The SDRAM Memory Controller has a 32-bit address bus, thus
supports up to 4 GiB of DRAM. There is a signed to unsigned
conversion error with the AST2600 maximum memory size:

  (uint64_t)(2048 << 20) = (uint64_t)(-2147483648)
                         = 0xffffffff40000000
                         = 16 EiB - 2 GiB

Fix by using the IEC suffixes which are usually safer, and add
an assertion check to verify the memory is valid. This would have
caught this bug:

  $ qemu-system-arm -M ast2600-evb
  qemu-system-arm: hw/misc/aspeed_sdmc.c:258: aspeed_sdmc_realize: Assertion `asc->max_ram_size < 4 * GiB' failed.
  Aborted (core dumped)

Fixes: 1550d72679 ("aspeed/sdmc: Add AST2600 support")
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-27 16:12:10 +01:00
Markus Armbruster
7a309cc95b qom: Change object_get_canonical_path_component() not to malloc
object_get_canonical_path_component() returns a malloced copy of a
property name on success, null on failure.

19 of its 25 callers immediately free the returned copy.

Change object_get_canonical_path_component() to return the property
name directly.  Since modifying the name would be wrong, adjust the
return type to const char *.

Drop the free from the 19 callers become simpler, add the g_strdup()
to the other six.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200714160202.3121879-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
2020-07-21 16:23:43 +02:00
Michael Rolnik
dc288de082 hw/misc: avr: Add limited support for power reduction device
This is a simple device of just one register, and whenever this
register is written to it calls qemu_set_irq function for each
of 8 bits/IRQs. It is used to implement AVR Power Reduction.

[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash include fix and file rename from f4bug]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-22-huth@tuxfamily.org>
2020-07-11 11:02:05 +02:00
Markus Armbruster
386f6c07d2 error: Avoid error_propagate() after migrate_add_blocker()
When migrate_add_blocker(blocker, &errp) is followed by
error_propagate(errp, err), we can often just as well do
migrate_add_blocker(..., errp).

Do that with this Coccinelle script:

    @@
    expression blocker, err, errp;
    expression ret;
    @@
    -    ret = migrate_add_blocker(blocker, &err);
    -    if (err) {
    +    ret = migrate_add_blocker(blocker, errp);
    +    if (ret < 0) {
             ... when != err;
    -        error_propagate(errp, err);
             ...
         }

    @@
    expression blocker, err, errp;
    @@
    -    migrate_add_blocker(blocker, &err);
    -    if (err) {
    +    if (migrate_add_blocker(blocker, errp) < 0) {
             ... when != err;
    -        error_propagate(errp, err);
             ...
         }

Double-check @err is not used afterwards.  Dereferencing it would be
use after free, but checking whether it's null would be legitimate.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-43-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster
668f62ec62 error: Eliminate error_propagate() with Coccinelle, part 1
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away.  Convert

    if (!foo(..., &err)) {
        ...
        error_propagate(errp, err);
        ...
        return ...
    }

to

    if (!foo(..., errp)) {
        ...
        ...
        return ...
    }

where nothing else needs @err.  Coccinelle script:

    @rule1 forall@
    identifier fun, err, errp, lbl;
    expression list args, args2;
    binary operator op;
    constant c1, c2;
    symbol false;
    @@
         if (
    (
    -        fun(args, &err, args2)
    +        fun(args, errp, args2)
    |
    -        !fun(args, &err, args2)
    +        !fun(args, errp, args2)
    |
    -        fun(args, &err, args2) op c1
    +        fun(args, errp, args2) op c1
    )
            )
         {
             ... when != err
                 when != lbl:
                 when strict
    -        error_propagate(errp, err);
             ... when != err
    (
             return;
    |
             return c2;
    |
             return false;
    )
         }

    @rule2 forall@
    identifier fun, err, errp, lbl;
    expression list args, args2;
    expression var;
    binary operator op;
    constant c1, c2;
    symbol false;
    @@
    -    var = fun(args, &err, args2);
    +    var = fun(args, errp, args2);
         ... when != err
         if (
    (
             var
    |
             !var
    |
             var op c1
    )
            )
         {
             ... when != err
                 when != lbl:
                 when strict
    -        error_propagate(errp, err);
             ... when != err
    (
             return;
    |
             return c2;
    |
             return false;
    |
             return var;
    )
         }

    @depends on rule1 || rule2@
    identifier err;
    @@
    -    Error *err = NULL;
         ... when != err

Not exactly elegant, I'm afraid.

The "when != lbl:" is necessary to avoid transforming

         if (fun(args, &err)) {
             goto out
         }
         ...
     out:
         error_propagate(errp, err);

even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().

Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly.  I don't know what exactly "when strict" does, only that
it helps here.

The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err".  For
an example where it's too narrow, see vfio_intx_enable().

Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there.  Converted manually.

Line breaks tidied up manually.  One nested declaration of @local_err
deleted manually.  Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster
dcfe480544 error: Avoid unnecessary error_propagate() after error_setg()
Replace

    error_setg(&err, ...);
    error_propagate(errp, err);

by

    error_setg(errp, ...);

Related pattern:

    if (...) {
        error_setg(&err, ...);
        goto out;
    }
    ...
 out:
    error_propagate(errp, err);
    return;

When all paths to label out are that way, replace by

    if (...) {
        error_setg(errp, ...);
        return;
    }

and delete the label along with the error_propagate().

When we have at most one other path that actually needs to propagate,
and maybe one at the end that where propagation is unnecessary, e.g.

    foo(..., &err);
    if (err) {
        goto out;
    }
    ...
    bar(..., &err);
 out:
    error_propagate(errp, err);
    return;

move the error_propagate() to where it's needed, like

    if (...) {
        foo(..., &err);
        error_propagate(errp, err);
        return;
    }
    ...
    bar(..., errp);
    return;

and transform the error_setg() as above.

In some places, the transformation results in obviously unnecessary
error_propagate().  The next few commits will eliminate them.

Bonus: the elimination of gotos will make later patches in this series
easier to review.

Candidates for conversion tracked down with this Coccinelle script:

    @@
    identifier err, errp;
    expression list args;
    @@
    -    error_setg(&err, args);
    +    error_setg(errp, args);
         ... when != err
         error_propagate(errp, err);

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-34-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster
5325cc34a2 qom: Put name parameter before value / visitor parameter
The object_property_set_FOO() setters take property name and value in
an unusual order:

    void object_property_set_FOO(Object *obj, FOO_TYPE value,
                                 const char *name, Error **errp)

Having to pass value before name feels grating.  Swap them.

Same for object_property_set(), object_property_get(), and
object_property_parse().

Convert callers with this Coccinelle script:

    @@
    identifier fun = {
        object_property_get, object_property_parse, object_property_set_str,
        object_property_set_link, object_property_set_bool,
        object_property_set_int, object_property_set_uint, object_property_set,
        object_property_set_qobject
    };
    expression obj, v, name, errp;
    @@
    -    fun(obj, v, name, errp)
    +    fun(obj, name, v, errp)

Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information".  Convert that one manually.

Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.

Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually.  The other files using RXCPU that way don't need
conversion.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
2020-07-10 15:18:08 +02:00
Markus Armbruster
4d21fcd524 qom: Don't handle impossible object_property_get_link() failure
Don't handle object_property_get_link() failure that can't happen
unless the programmer screwed up, pass &error_abort.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200707160613.848843-25-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster
62a35aaa31 qapi: Use returned bool to check for failure, Coccinelle part
The previous commit enables conversion of

    visit_foo(..., &err);
    if (err) {
        ...
    }

to

    if (!visit_foo(..., errp)) {
        ...
    }

for visitor functions that now return true / false on success / error.
Coccinelle script:

    @@
    identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
    expression list args;
    typedef Error;
    Error *err;
    @@
    -    fun(args, &err);
    -    if (err)
    +    if (!fun(args, &err))
         {
             ...
         }

A few line breaks tidied up manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster
0a15a73236 macio: Tidy up error handling in macio_newworld_realize()
macio_newworld_realize() effectively ignores ns->gpio realization
errors, leaking the Error object.  Fortunately, macio_gpio_realize()
can't actually fail.  Tidy up.

Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200707160613.848843-6-armbru@redhat.com>
2020-07-10 15:01:06 +02:00
Markus Armbruster
118bfd76c9 qdev: Use returned bool to check for qdev_realize() etc. failure
Convert

    foo(..., &err);
    if (err) {
        ...
    }

to

    if (!foo(..., &err)) {
        ...
    }

for qdev_realize(), qdev_realize_and_unref(), qbus_realize() and their
wrappers isa_realize_and_unref(), pci_realize_and_unref(),
sysbus_realize(), sysbus_realize_and_unref(), usb_realize_and_unref().
Coccinelle script:

    @@
    identifier fun = {
        isa_realize_and_unref, pci_realize_and_unref, qbus_realize,
        qdev_realize, qdev_realize_and_unref, sysbus_realize,
        sysbus_realize_and_unref, usb_realize_and_unref
    };
    expression list args, args2;
    typedef Error;
    Error *err;
    @@
    -    fun(args, &err, args2);
    -    if (err)
    +    if (!fun(args, &err, args2))
         {
             ...
         }

Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information".  Nothing to convert there; skipped.

Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Converted manually.

A few line breaks tidied up manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200707160613.848843-5-armbru@redhat.com>
2020-07-10 15:01:06 +02:00
Peter Maydell
3029681235 hw/misc/max111x: Create header file for documentation, TYPE_ macros
Create a header file for the hw/misc/max111x device, in the
usual modern style for QOM devices:
 * definition of the TYPE_ constants and macros
 * definition of the device's state struct so that it can
   be embedded in other structs if desired
 * documentation of the interface

This allows us to use TYPE_MAX_1111 in the spitz.c code rather
than the string "max1111".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628142429.17111-12-peter.maydell@linaro.org
2020-07-03 16:59:45 +01:00
Peter Maydell
871f82722c hw/misc/max111x: Use GPIO lines rather than max111x_set_input()
The max111x ADC device model allows other code to set the level on
the 8 ADC inputs using the max111x_set_input() function.  Replace
this with generic qdev GPIO inputs, which also allow inputs to be set
to arbitrary values.

Using GPIO lines will make it easier for board code to wire things
up, so that if device A wants to set the ADC input it doesn't need to
have a direct pointer to the max111x but can just set that value on
its output GPIO, which is then wired up by the board to the
appropriate max111x input.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-11-peter.maydell@linaro.org
2020-07-03 16:59:45 +01:00
Peter Maydell
40d9d2f768 hw/misc/max111x: Don't use vmstate_register()
The max111x is a proper qdev device; we can use dc->vmsd rather than
directly calling vmstate_register().

It's possible that this is a migration compat break, but the only
boards that use this device are the spitz-family ('akita', 'borzoi',
'spitz', 'terrier').

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-8-peter.maydell@linaro.org
2020-07-03 16:59:44 +01:00
Peter Maydell
b064d51f60 hw/misc/max111x: provide QOM properties for setting initial values
Add some QOM properties to the max111x ADC device to allow the
initial values to be configured. Currently this is done by
board code calling max111x_set_input() after it creates the
device, which doesn't work on system reset.

This requires us to implement a reset method for this device,
so while we're doing that make sure we reset the other parts
of the device state.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-7-peter.maydell@linaro.org
2020-07-03 16:59:44 +01:00
Markus Armbruster
2726dc51e0 hw: Fix error API violation around object_property_set_link()
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

virtio_gpu_pci_base_realize(), virtio_vga_base_realize(),
sparc32_ledma_device_realize(), sparc32_dma_realize(),
sparc32_dma_realize() xilinx_axidma_realize(), mips_cps_realize(),
macio_realize_ide(), xilinx_enet_realize(), and
virtio_iommu_pci_realize() are wrong that way: they reuse the argument
they pass to object_property_set_link() for another call.

Harmless, because object_property_set_link() can't actually fail for
them: it fails when the property doesn't exist, is not settable, or
its .check() method fails.  Fix by passing &error_abort instead.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alistair Francis <alistair@alistair23.me>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Cc: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200630090351.1247703-16-armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-07-02 06:25:29 +02:00
Philippe Mathieu-Daudé
fc1bff9589 hw/misc/pca9552: Add missing TypeInfo::class_size field
When adding the generic PCA955xClass in commit 736132e455, we
forgot to set the class_size field. Fill it now to avoid:

  (gdb) run -machine mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf
  Starting program: ../../qemu/qemu/arm-softmmu/qemu-system-arm -machine mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf
  double free or corruption (!prev)
  Thread 1 "qemu-system-arm" received signal SIGABRT, Aborted.
  __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
  (gdb) where
  #0  __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
  #1  0x00007ffff75d8859 in __GI_abort () at abort.c:79
  #2  0x00007ffff76433ee in __libc_message
      (action=action@entry=do_abort, fmt=fmt@entry=0x7ffff776d285 "%s\n")
      at ../sysdeps/posix/libc_fatal.c:155
  #3  0x00007ffff764b47c in malloc_printerr
      (str=str@entry=0x7ffff776f690 "double free or corruption (!prev)")
      at malloc.c:5347
  #4  0x00007ffff764d12c in _int_free
      (av=0x7ffff779eb80 <main_arena>, p=0x5555567a3990, have_lock=<optimized out>) at malloc.c:4317
  #5  0x0000555555c906c3 in type_initialize_interface
      (ti=ti@entry=0x5555565b8f40, interface_type=0x555556597ad0, parent_type=0x55555662ca10) at qom/object.c:259
  #6  0x0000555555c902da in type_initialize (ti=ti@entry=0x5555565b8f40)
      at qom/object.c:323
  #7  0x0000555555c90d20 in type_initialize (ti=0x5555565b8f40)
      at qom/object.c:1028

  $ valgrind --track-origins=yes qemu-system-arm -M mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf
  ==77479== Memcheck, a memory error detector
  ==77479== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
  ==77479== Using Valgrind-3.15.0 and LibVEX; rerun with -h for copyright info
  ==77479== Command: qemu-system-arm -M mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf
  ==77479==
  ==77479== Invalid write of size 2
  ==77479==    at 0x6D8322: pca9552_class_init (pca9552.c:424)
  ==77479==    by 0x844D1F: type_initialize (object.c:1029)
  ==77479==    by 0x844D1F: object_class_foreach_tramp (object.c:1016)
  ==77479==    by 0x4AE1057: g_hash_table_foreach (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2)
  ==77479==    by 0x8453A4: object_class_foreach (object.c:1038)
  ==77479==    by 0x8453A4: object_class_get_list (object.c:1095)
  ==77479==    by 0x556194: select_machine (vl.c:2416)
  ==77479==    by 0x556194: qemu_init (vl.c:3828)
  ==77479==    by 0x40AF9C: main (main.c:48)
  ==77479==  Address 0x583f108 is 0 bytes after a block of size 200 alloc'd
  ==77479==    at 0x483DD99: calloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
  ==77479==    by 0x4AF8D30: g_malloc0 (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2)
  ==77479==    by 0x844258: type_initialize.part.0 (object.c:306)
  ==77479==    by 0x844D1F: type_initialize (object.c:1029)
  ==77479==    by 0x844D1F: object_class_foreach_tramp (object.c:1016)
  ==77479==    by 0x4AE1057: g_hash_table_foreach (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2)
  ==77479==    by 0x8453A4: object_class_foreach (object.c:1038)
  ==77479==    by 0x8453A4: object_class_get_list (object.c:1095)
  ==77479==    by 0x556194: select_machine (vl.c:2416)
  ==77479==    by 0x556194: qemu_init (vl.c:3828)
  ==77479==    by 0x40AF9C: main (main.c:48)

Fixes: 736132e455 ("hw/misc/pca9552: Add generic PCA955xClass")
Reported-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Message-id: 20200629074704.23028-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-29 21:16:10 +01:00
Philippe Mathieu-Daudé
586f495b1e hw/misc/pca9552: Model qdev output GPIOs
The PCA9552 has 16 GPIOs which can be used as input,
output or PWM mode. QEMU models the output GPIO with
the qemu_irq type. Let the device expose the 16 GPIOs
to allow us to later connect LEDs to these outputs.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-10-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:30:28 +01:00
Philippe Mathieu-Daudé
d82ab2931d hw/misc/pca9552: Trace GPIO change events
Emit a trace event when a GPIO change its state.

Example booting obmc-phosphor-image:

  $ qemu-system-arm -M witherspoon-bmc -trace pca955x_gpio_change
  1592690552.687372:pca955x_gpio_change pca1 GPIO id:0 status: 0 -> 1
  1592690552.690169:pca955x_gpio_change pca1 GPIO id:1 status: 0 -> 1
  1592690552.691673:pca955x_gpio_change pca1 GPIO id:2 status: 0 -> 1
  1592690552.696886:pca955x_gpio_change pca1 GPIO id:3 status: 0 -> 1
  1592690552.698614:pca955x_gpio_change pca1 GPIO id:13 status: 0 -> 1
  1592690552.699833:pca955x_gpio_change pca1 GPIO id:14 status: 0 -> 1
  1592690552.700842:pca955x_gpio_change pca1 GPIO id:15 status: 0 -> 1
  1592690683.841921:pca955x_gpio_change pca1 GPIO id:14 status: 1 -> 0
  1592690683.861660:pca955x_gpio_change pca1 GPIO id:14 status: 0 -> 1
  1592690684.371460:pca955x_gpio_change pca1 GPIO id:14 status: 1 -> 0
  1592690684.882115:pca955x_gpio_change pca1 GPIO id:14 status: 0 -> 1
  1592690685.391411:pca955x_gpio_change pca1 GPIO id:14 status: 1 -> 0
  1592690685.901391:pca955x_gpio_change pca1 GPIO id:14 status: 0 -> 1
  1592690686.411678:pca955x_gpio_change pca1 GPIO id:14 status: 1 -> 0
  1592690686.921279:pca955x_gpio_change pca1 GPIO id:14 status: 0 -> 1

We notice the GPIO #14 (front-power LED) starts to blink.

This LED is described in the witherspoon device-tree [*]:

  front-power {
      retain-state-shutdown;
      default-state = "keep";
      gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
  };

[*] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts?id=b1f9be9392f0#n140

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-9-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:30:28 +01:00
Philippe Mathieu-Daudé
b989b89f67 hw/misc/pca9552: Trace GPIO High/Low events
Add a trivial representation of the PCA9552 GPIOs.

Example booting obmc-phosphor-image:

  $ qemu-system-arm -M witherspoon-bmc -trace pca955x_gpio_status
  1592689902.327837:pca955x_gpio_status pca-unspecified GPIOs 0-15 [*...............]
  1592689902.329934:pca955x_gpio_status pca-unspecified GPIOs 0-15 [**..............]
  1592689902.330717:pca955x_gpio_status pca-unspecified GPIOs 0-15 [***.............]
  1592689902.331431:pca955x_gpio_status pca-unspecified GPIOs 0-15 [****............]
  1592689902.332163:pca955x_gpio_status pca-unspecified GPIOs 0-15 [****.........*..]
  1592689902.332888:pca955x_gpio_status pca-unspecified GPIOs 0-15 [****.........**.]
  1592689902.333629:pca955x_gpio_status pca-unspecified GPIOs 0-15 [****.........***]
  1592690032.793289:pca955x_gpio_status pca-unspecified GPIOs 0-15 [****.........*.*]
  1592690033.303163:pca955x_gpio_status pca-unspecified GPIOs 0-15 [****.........***]
  1592690033.812962:pca955x_gpio_status pca-unspecified GPIOs 0-15 [****.........*.*]
  1592690034.323234:pca955x_gpio_status pca-unspecified GPIOs 0-15 [****.........***]
  1592690034.832922:pca955x_gpio_status pca-unspecified GPIOs 0-15 [****.........*.*]

We notice the GPIO #14 (front-power LED) starts to blink.

This LED is described in the witherspoon device-tree [*]:

  front-power {
      retain-state-shutdown;
      default-state = "keep";
      gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
  };

[*] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts?id=b1f9be9392f0#n140

Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-7-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:30:28 +01:00
Philippe Mathieu-Daudé
2df252d879 hw/misc/pca9552: Add a 'description' property for debugging purpose
Add a description field to distinguish between multiple devices.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:30:28 +01:00
Philippe Mathieu-Daudé
736132e455 hw/misc/pca9552: Add generic PCA955xClass, parent of TYPE_PCA9552
Extract the code common to the PCA955x family in PCA955xClass,
keeping the PCA9552 specific parts into pca9552_class_init().
Remove the 'TODO' comment added in commit 5141d4158c.

Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:30:28 +01:00
Philippe Mathieu-Daudé
ec17228a25 hw/misc/pca9552: Rename generic code as pca955x
Various code from the PCA9552 device model is generic to the
PCA955X family. We'll split the generic code in a base class
in the next commit. To ease review, first do a dumb renaming.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:30:28 +01:00
Philippe Mathieu-Daudé
8208335b95 hw/misc/pca9552: Rename 'nr_leds' as 'pin_count'
The PCA9552 device does not expose LEDs, but simple pins
to connnect LEDs to. To be clearer with the device model,
rename 'nr_leds' as 'pin_count'.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:30:28 +01:00
Mark Cave-Ayland
913f47ef96 adb: only call autopoll callbacks when autopoll is not blocked
Handle this at the ADB bus level so that individual implementations do not need
to handle this themselves.

Finally add an assert() into adb_request() to prevent developers from accidentally
making an explicit ADB request without blocking autopoll.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-21-mark.cave-ayland@ilande.co.uk>
2020-06-26 10:13:52 +01:00
Mark Cave-Ayland
975fcedd31 mac_via: rework ADB state machine to be compatible with both MacOS and Linux
The existing ADB state machine is designed to work with Linux which has a different
interpretation of the state machine detailed in "Guide to the Macintosh Family
Hardware". In particular the current Linux implementation includes an extra change
to IDLE state when switching the VIA between send and receive modes which does not
occur in MacOS, and omitting this transition causes the current mac_via ADB state
machine to fail.

Rework the ADB state machine accordingly so that it can enumerate and autopoll the
ADB under both Linux and MacOS, including the addition of the new adb_autopoll_block()
and adb_autopoll_unblock() functions.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-20-mark.cave-ayland@ilande.co.uk>
2020-06-26 10:13:52 +01:00
Mark Cave-Ayland
378a503479 mac_via: move VIA1 portB write logic into mos6522_q800_via1_write()
Currently the logic is split between the mos6522 portB_write() callback and
the memory region used to capture the VIA1 MMIO accesses. Move everything
into the latter mos6522_q800_via1_write() function to keep all the logic in
one place to make it easier to follow.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-19-mark.cave-ayland@ilande.co.uk>
2020-06-26 10:13:52 +01:00
Mark Cave-Ayland
cf093b0772 pmu: add adb_autopoll_block() and adb_autopoll_unblock() functions
Ensure that the PMU buffer is protected from autopoll requests overwriting
its contents whilst existing PMU requests are in progress.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-18-mark.cave-ayland@ilande.co.uk>
2020-06-26 10:13:52 +01:00
Mark Cave-Ayland
45c9d721ef cuda: add adb_autopoll_block() and adb_autopoll_unblock() functions
Ensure that the CUDA buffer is protected from autopoll requests overwriting
its contents whilst existing CUDA requests are in progress.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-17-mark.cave-ayland@ilande.co.uk>
2020-06-26 10:13:52 +01:00
Mark Cave-Ayland
f3d61457e8 mac_via: convert to use ADBBusState internal autopoll variables
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-11-mark.cave-ayland@ilande.co.uk>
2020-06-26 10:13:51 +01:00
Mark Cave-Ayland
df381d584c pmu: convert to use ADBBusState internal autopoll variables
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-10-mark.cave-ayland@ilande.co.uk>
2020-06-26 10:13:51 +01:00
Mark Cave-Ayland
b12a0b164c cuda: convert to use ADBBusState internal autopoll variables
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-9-mark.cave-ayland@ilande.co.uk>
2020-06-26 10:13:51 +01:00
Mark Cave-Ayland
414eb1d500 pmu: honour autopoll_rate_ms when rearming the ADB autopoll timer
Don't use a fixed value but instead use the default value from the ADB bus
state.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-6-mark.cave-ayland@ilande.co.uk>
2020-06-26 10:13:51 +01:00
Mark Cave-Ayland
dcb091c40e pmu: fix duplicate autopoll mask variable
It seems that during the initial work to introduce the via-pmu ADB support a
duplicate autopoll mask variable was accidentally left in place.

Remove the duplicate autopoll_mask variable and switch everything over to
use adb_poll_mask instead.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-5-mark.cave-ayland@ilande.co.uk>
2020-06-26 10:13:51 +01:00
Mark Cave-Ayland
d9b898943d cuda: convert ADB autopoll timer from ns to ms
This is in preparation for consolidating all of the ADB autopoll management
in one place.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-4-mark.cave-ayland@ilande.co.uk>
2020-06-26 10:13:51 +01:00
Peter Maydell
cb8278cd99 * hw: arm: Set vendor property for IMX SDHCI emulations
* sd: sdhci: Implement basic vendor specific register support
  * hw/net/imx_fec: Convert debug fprintf() to trace events
  * target/arm/cpu: adjust virtual time for all KVM arm cpus
  * Implement configurable descriptor size in ftgmac100
  * hw/misc/imx6ul_ccm: Implement non writable bits in CCM registers
  * target/arm: More Neon decodetree conversion work
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl7olzoZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3kkqD/9UtCpXnSTQemK5ejuUrhnb
 LLtth7ce+XHPIoxyEeaAR89umZkooAjFG5ySnZ5QV5b0FxWrcUyK2saDdBKNHhcG
 En2kWJxebbAbMAw+vvgWx/NgzbpTwGsdYw7h2gmwpJ0RLqjzfMxwXIm4sA3g9kHs
 d2ymitwiDvAhQZHJzJ3nWZQ4QUJyDueWuHy5mjBEjAmU3R1YkOAzNCJisq3zMzFV
 4bLhA48HnqqJc8sfDqiNSk1+NoP9BUhORHtgPmz2V2RVbT6fHsIyP+pAD+vZIPht
 NmEY86RmCbuNWrPfYSnCaqx86Jj0T5ZghFlfOlKwy+AghebsAjlQmV5QvksjR5NA
 1um0usrnsMT5AF0Hmca7wMizc2Y7Dw7OJQC8LYRWhonR78XvLJU3NNL2K+lk5CQa
 lzoBauYOZdcQcwNue+xBNN6vR1g7H0Qq0Rpq9acpuU5enjn9KV/fOTdfq6Xy5h8G
 0MVwKNtH4HuQKVJXFMXKz7eZvguqRn6aKFNa1FYobfyPHX7V9HmRyWo1nKDK2WL6
 oJ3QgH6m2Bumd9GGCDyyWWd/iEn8l+zVHaUZkdEB/msMZdjlqtXMX6AzQMvR54Kd
 Ee2wgli/O01KAfqVhk11+WCV0Xn3sAC0g3/a9Hg4n884Ef42/+pBbSH8/I+HbJiC
 ETJeogXVMrBH8v4DDrKzsQ==
 =UmOR
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200616' into staging

 * hw: arm: Set vendor property for IMX SDHCI emulations
 * sd: sdhci: Implement basic vendor specific register support
 * hw/net/imx_fec: Convert debug fprintf() to trace events
 * target/arm/cpu: adjust virtual time for all KVM arm cpus
 * Implement configurable descriptor size in ftgmac100
 * hw/misc/imx6ul_ccm: Implement non writable bits in CCM registers
 * target/arm: More Neon decodetree conversion work

# gpg: Signature made Tue 16 Jun 2020 10:56:10 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200616: (23 commits)
  hw: arm: Set vendor property for IMX SDHCI emulations
  sd: sdhci: Implement basic vendor specific register support
  hw/net/imx_fec: Convert debug fprintf() to trace events
  target/arm/cpu: adjust virtual time for all KVM arm cpus
  Implement configurable descriptor size in ftgmac100
  hw/misc/imx6ul_ccm: Implement non writable bits in CCM registers
  target/arm: Convert Neon VDUP (scalar) to decodetree
  target/arm: Convert Neon VTBL, VTBX to decodetree
  target/arm: Convert Neon VEXT to decodetree
  target/arm: Convert Neon 2-reg-scalar long multiplies to decodetree
  target/arm: Convert Neon 2-reg-scalar VQRDMLAH, VQRDMLSH to decodetree
  target/arm: Convert Neon 2-reg-scalar VQDMULH, VQRDMULH to decodetree
  target/arm: Convert Neon 2-reg-scalar float multiplies to decodetree
  target/arm: Convert Neon 2-reg-scalar integer multiplies to decodetree
  target/arm: Add missing TCG temp free in do_2shift_env_64()
  target/arm: Add 'static' and 'const' annotations to VSHLL function arrays
  target/arm: Convert Neon 3-reg-diff polynomial VMULL
  target/arm: Convert Neon 3-reg-diff saturating doubling multiplies
  target/arm: Convert Neon 3-reg-diff long multiplies
  target/arm: Convert Neon 3-reg-diff VABAL, VABDL to decodetree
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/arm/fsl-imx25.c
#	hw/arm/fsl-imx6.c
#	hw/arm/fsl-imx6ul.c
#	hw/arm/fsl-imx7.c
2020-06-16 13:36:31 +01:00
Jean-Christophe Dubois
3d26d7d690 hw/misc/imx6ul_ccm: Implement non writable bits in CCM registers
Some bits of the CCM registers are non writable.

This was left undone in the initial commit (all bits of registers were
writable).

This patch adds the required code to protect the non writable bits.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 20200608133508.550046-1-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-16 10:32:28 +01:00
Markus Armbruster
db873cc5d1 sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2
This is the same transformation as in the previous commit, except
sysbus_init_child_obj() and realize are too separated for the commit's
Coccinelle script to handle, typically because sysbus_init_child_obj()
is in a device's instance_init() method, and the matching realize is
in its realize() method.

Perhaps a Coccinelle wizard could make it transform that pattern, but
I'm just a bungler, and the best I can do is transforming the two
separate parts separately:

    @@
    expression errp;
    expression child;
    symbol true;
    @@
    -    object_property_set_bool(OBJECT(child), true, "realized", errp);
    +    sysbus_realize(SYS_BUS_DEVICE(child), errp);
    // only correct with a matching sysbus_init_child_obj() transformation!

    @@
    expression errp;
    expression child;
    symbol true;
    @@
    -    object_property_set_bool(child, true, "realized", errp);
    +    sysbus_realize(SYS_BUS_DEVICE(child), errp);
    // only correct with a matching sysbus_init_child_obj() transformation!

    @@
    expression child;
    @@
    -    qdev_init_nofail(DEVICE(child));
    +    sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal);
    // only correct with a matching sysbus_init_child_obj() transformation!

    @@
    expression child;
    expression dev;
    @@
         dev = DEVICE(child);
         ...
    -    qdev_init_nofail(dev);
    +    sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
    // only correct with a matching sysbus_init_child_obj() transformation!

    @@
    expression child;
    identifier dev;
    @@
         DeviceState *dev = DEVICE(child);
         ...
    -    qdev_init_nofail(dev);
    +    sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
    // only correct with a matching sysbus_init_child_obj() transformation!

    @@
    expression parent, name, size, type;
    expression child;
    symbol true;
    @@
    -    sysbus_init_child_obj(parent, name, child, size, type);
    +    sysbus_init_child_XXX(parent, name, child, size, type);

    @@
    expression parent, propname, type;
    expression child;
    @@
    -    sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type)
    +    object_initialize_child(parent, propname, child, type)

    @@
    expression parent, propname, type;
    expression child;
    @@
    -    sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type)
    +    object_initialize_child(parent, propname, &child, type)

This script is *unsound*: we need to manually verify init and realize
conversions are properly paired.

This commit has only the pairs where object_initialize_child()'s
@child and sysbus_realize()'s @dev argument text match exactly within
the same source file.

Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c.  Worked around by temporarily renaming the macro for
the spatch run.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-15 22:06:04 +02:00
Markus Armbruster
0074fce61f sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 1
I'm converting from qdev_set_parent_bus()/realize to qdev_realize();
recent commit "qdev: Convert uses of qdev_set_parent_bus() with
Coccinelle" explains why.

sysbus_init_child_obj() is a wrapper around
object_initialize_child_with_props() and qdev_set_parent_bus().  It
passes no properties.

Convert sysbus_init_child_obj()/realize to object_initialize_child()/
qdev_realize().

Coccinelle script:

    @@
    expression parent, name, size, type, errp;
    expression child;
    symbol true;
    @@
    -    sysbus_init_child_obj(parent, name, &child, size, type);
    +    sysbus_init_child_XXX(parent, name, &child, size, type);
         ...
    -    object_property_set_bool(OBJECT(&child), true, "realized", errp);
    +    sysbus_realize(SYS_BUS_DEVICE(&child), errp);

    @@
    expression parent, name, size, type, errp;
    expression child;
    symbol true;
    @@
    -    sysbus_init_child_obj(parent, name, child, size, type);
    +    sysbus_init_child_XXX(parent, name, child, size, type);
         ...
    -    object_property_set_bool(OBJECT(child), true, "realized", errp);
    +    sysbus_realize(SYS_BUS_DEVICE(child), errp);

    @@
    expression parent, name, size, type;
    expression child;
    expression dev;
    expression expr;
    @@
    -    sysbus_init_child_obj(parent, name, child, size, type);
    +    sysbus_init_child_XXX(parent, name, child, size, type);
         ...
         dev = DEVICE(child);
         ... when != dev = expr;
    -    qdev_init_nofail(dev);
    +    sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);

    @@
    expression parent, propname, type;
    expression child;
    @@
    -    sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type)
    +    object_initialize_child(parent, propname, child, type)

    @@
    expression parent, propname, type;
    expression child;
    @@
    -    sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type)
    +    object_initialize_child(parent, propname, &child, type)

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-48-armbru@redhat.com>
2020-06-15 22:06:04 +02:00
Markus Armbruster
3c6ef471ee sysbus: Convert to sysbus_realize() etc. with Coccinelle
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus
argument to sysbus_realize(), sysbus_realize_and_unref().

Coccinelle script:

    @@
    expression dev, errp;
    @@
    -    qdev_realize(DEVICE(dev), NULL, errp);
    +    sysbus_realize(SYS_BUS_DEVICE(dev), errp);

    @@
    expression sysbus_dev, dev, errp;
    @@
    +    sysbus_dev = SYS_BUS_DEVICE(dev);
    -    qdev_realize_and_unref(dev, NULL, errp);
    +    sysbus_realize_and_unref(sysbus_dev, errp);
    -    sysbus_dev = SYS_BUS_DEVICE(dev);

    @@
    expression sysbus_dev, dev, errp;
    expression expr;
    @@
         sysbus_dev = SYS_BUS_DEVICE(dev);
         ... when != dev = expr;
    -    qdev_realize_and_unref(dev, NULL, errp);
    +    sysbus_realize_and_unref(sysbus_dev, errp);

    @@
    expression dev, errp;
    @@
    -    qdev_realize_and_unref(DEVICE(dev), NULL, errp);
    +    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp);

    @@
    expression dev, errp;
    @@
    -    qdev_realize_and_unref(dev, NULL, errp);
    +    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp);

Whitespace changes minimized manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-46-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15 22:05:28 +02:00
Markus Armbruster
8fb9cfe762 macio: Eliminate macio_init_child_obj()
macio_init_child_obj() has become a trivial wrapper around
object_initialize_child_with_props().  Eliminate it, since the general
convenience wrapper object_initialize_child() is just as convenient
already.

Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-39-armbru@redhat.com>
2020-06-15 22:05:28 +02:00
Markus Armbruster
f4a0df70a2 macio: Convert use of qdev_set_parent_bus()
Convert qdev_set_parent_bus()/realize to qdev_realize(); recent commit
"qdev: New qdev_new(), qdev_realize(), etc." explains why.

Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-38-armbru@redhat.com>
2020-06-15 22:05:28 +02:00
Markus Armbruster
9fc7fc4d39 qom: Less verbose object_initialize_child()
All users of object_initialize_child() pass the obvious child size
argument.  Almost all pass &error_abort and no properties.  Tiresome.

Rename object_initialize_child() to
object_initialize_child_with_props() to free the name.  New
convenience wrapper object_initialize_child() automates the size
argument, and passes &error_abort and no properties.

Rename object_initialize_childv() to
object_initialize_child_with_propsv() for consistency.

Convert callers with this Coccinelle script:

    @@
    expression parent, propname, type;
    expression child, size;
    symbol error_abort;
    @@
    -    object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL)
    +    object_initialize_child(parent, propname, child, size, type, &error_abort, NULL)

    @@
    expression parent, propname, type;
    expression child;
    symbol error_abort;
    @@
    -    object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL)
    +    object_initialize_child(parent, propname, child, type)

    @@
    expression parent, propname, type;
    expression child;
    symbol error_abort;
    @@
    -    object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL)
    +    object_initialize_child(parent, propname, &child, type)

    @@
    expression parent, propname, type;
    expression child, size, err;
    expression list props;
    @@
    -    object_initialize_child(parent, propname, child, size, type, err, props)
    +    object_initialize_child_with_props(parent, propname, child, size, type, err, props)

Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c.  Worked around by temporarily renaming the macro for
the spatch run.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
[Rebased: machine opentitan is new (commit fe0fe4735e)]
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-15 22:05:28 +02:00
Markus Armbruster
cd9ae806cd auxbus: Eliminate aux_create_slave()
aux_create_slave() has become a trivial wrapper around qdev_new().
There's just one user.  Eliminate.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-35-armbru@redhat.com>
2020-06-15 22:05:28 +02:00
Markus Armbruster
2214985408 auxbus: Convert a use of qdev_set_parent_bus()
Convert qdev_set_parent_bus()/qdev_init_nofail() to qdev_realize();
recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains
why.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-34-armbru@redhat.com>
2020-06-15 22:05:28 +02:00
Markus Armbruster
b7a1b5483e auxbus: New aux_bus_realize(), pairing with aux_bus_init()
aux_bus_init() encapsulates the creation of an aux-bus and its
aux-to-i2c-bridge device.

Create aux_bus_realize() to similarly encapsulate their realization.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-33-armbru@redhat.com>
2020-06-15 22:05:28 +02:00
Markus Armbruster
dbe4070e59 auxbus: Rename aux_init_bus() to aux_bus_init()
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-32-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-06-15 22:05:28 +02:00
Markus Armbruster
99ba777e53 qdev: Convert uses of qdev_set_parent_bus() with Coccinelle
In addition to the qdev_create() patterns converted so far, we have a
qdev_set_parent_bus() pattern.  Mostly when we embed a device in a
parent device rather than allocating it on the heap.

This pattern also puts devices in the dangerous "no QOM parent, but
plugged into bus" state I explained in recent commit "qdev: New
qdev_new(), qdev_realize(), etc."

Apply same solution: convert to qdev_realize().  Coccinelle script:

    @@
    expression dev, bus, errp;
    symbol true;
    @@
    -    qdev_set_parent_bus(DEVICE(dev), bus);
         ...
    -    object_property_set_bool(OBJECT(dev), true, "realized", errp);
    +    qdev_realize(DEVICE(dev), bus, errp);

    @ depends on !(file in "qdev-monitor.c") && !(file in "hw/core/qdev.c")@
    expression dev, bus, errp;
    symbol true;
    @@
    -    qdev_set_parent_bus(dev, bus);
         ...
    -    object_property_set_bool(OBJECT(dev), true, "realized", errp);
    +    qdev_realize(dev, bus, errp);

    @@
    expression dev, bus;
    symbol true;
    @@
    -    qdev_set_parent_bus(DEVICE(dev), bus);
         ...
    -    qdev_init_nofail(DEVICE(dev));
    +    qdev_realize(DEVICE(dev), bus, &error_fatal);

Unconverted uses of qdev_set_parent_bus() remain.  They'll be
converted later in this series.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-12-armbru@redhat.com>
[Also convert new hw/virtio/vhost-user-vsock-pci.c]
2020-06-15 22:05:08 +02:00
Markus Armbruster
3e80f6902c qdev: Convert uses of qdev_create() with Coccinelle
This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion.  More to come in
this series.

Coccinelle script:

    @ depends on !(file in "hw/arm/highbank.c")@
    expression bus, type_name, dev, expr;
    @@
    -    dev = qdev_create(bus, type_name);
    +    dev = qdev_new(type_name);
         ... when != dev = expr
    -    qdev_init_nofail(dev);
    +    qdev_realize_and_unref(dev, bus, &error_fatal);

    @@
    expression bus, type_name, dev, expr;
    identifier DOWN;
    @@
    -    dev = DOWN(qdev_create(bus, type_name));
    +    dev = DOWN(qdev_new(type_name));
         ... when != dev = expr
    -    qdev_init_nofail(DEVICE(dev));
    +    qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal);

    @@
    expression bus, type_name, expr;
    identifier dev;
    @@
    -    DeviceState *dev = qdev_create(bus, type_name);
    +    DeviceState *dev = qdev_new(type_name);
         ... when != dev = expr
    -    qdev_init_nofail(dev);
    +    qdev_realize_and_unref(dev, bus, &error_fatal);

    @@
    expression bus, type_name, dev, expr, errp;
    symbol true;
    @@
    -    dev = qdev_create(bus, type_name);
    +    dev = qdev_new(type_name);
         ... when != dev = expr
    -    object_property_set_bool(OBJECT(dev), true, "realized", errp);
    +    qdev_realize_and_unref(dev, bus, errp);

    @@
    expression bus, type_name, expr, errp;
    identifier dev;
    symbol true;
    @@
    -    DeviceState *dev = qdev_create(bus, type_name);
    +    DeviceState *dev = qdev_new(type_name);
         ... when != dev = expr
    -    object_property_set_bool(OBJECT(dev), true, "realized", errp);
    +    qdev_realize_and_unref(dev, bus, errp);

The first rule exempts hw/arm/highbank.c, because it matches along two
control flow paths there, with different @type_name.  Covered by the
next commit's manual conversions.

Missing #include "qapi/error.h" added manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-10-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15 22:00:10 +02:00
Markus Armbruster
4e3a6778b0 qdev: Put qdev_new() to use with Coccinelle
Let's start simple and put qdev_new() to use.  Coccinelle script:

    @ depends on !(file in "hw/core/qdev.c")@
    expression type_name;
    @@
    -    DEVICE(object_new(type_name))
    +    qdev_new(type_name)

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-6-armbru@redhat.com>
2020-06-15 21:36:30 +02:00
Markus Armbruster
6741a3430b macio: Fix macio-bus to be a subtype of System bus
The devices we plug into the macio-bus are all sysbus devices
(DeviceClass member bus_type is TYPE_SYSTEM_BUS), but macio-bus does
not derive from TYPE_SYSTEM_BUS.  Fix that.

"info qtree" now shows the devices' mmio ranges, as it should

Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200609122339.937862-16-armbru@redhat.com>
2020-06-15 21:36:21 +02:00
Markus Armbruster
514db7710b macio: Put "macio-nvram" device on the macio bus
macio_oldworld_init() creates a "macio-nvram", sysbus device, but
neglects to but it on a bus.

Put it on the macio bus.  Affects machine g3beige.  Visible in "info
qtree":

             bus: macio.0
               type macio-bus
               [...]
    +          dev: macio-nvram, id ""
    +            size = 8192 (0x2000)
    +            it_shift = 4 (0x4)

This also makes it a QOM child of macio-oldworld.  Visible in "info
qom-tree":

     /machine (g3beige-machine)
       [...]
       /unattached (container)
         [...]
         /device[6] (macio-oldworld)
           [...]
    -    /device[7] (macio-nvram)
    -      /macio-nvram[0] (qemu:memory-region)
    +      /nvram (macio-nvram)
    +        /macio-nvram[0] (qemu:memory-region)
         [rest of device[*] renumbered...]

Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200609122339.937862-15-armbru@redhat.com>
2020-06-15 21:36:21 +02:00
Markus Armbruster
33208432f5 macio: Delete unused "macio-gpio" devices
These devices go with the "via-pmu" device, which is controlled by
property "has-pmu".  macio_newworld_init() creates it unconditionally,
because the property has not been set then.  macio_newworld_realize()
realizes it only when the property is true.  Works, although it can
leave an unrealized device hanging around in the QOM composition tree.
Affects machine mac99 with via=cuda (default).

Delete the unused device by making macio_newworld_realize() unparent
it.  Visible in "info qom-tree":

     /machine (mac99-machine)
       [...]
       /unattached (container)
         /device[9] (macio-newworld)
           [...]
           /escc-legacy-port[8] (qemu:memory-region)
           /escc-legacy-port[9] (qemu:memory-region)
           /escc-legacy[0] (qemu:memory-region)
    -      /gpio (macio-gpio)
    -        /gpio[0] (qemu:memory-region)
           /ide[0] (macio-ide)
             /ide.0 (IDE)
             /pmac-ide[0] (qemu:memory-region)

Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20200609122339.937862-11-armbru@redhat.com>
2020-06-15 21:36:21 +02:00
Markus Armbruster
3d81f594fd macio: Fix to realize "mos6522-cuda" and "mos6522-pmu" devices
cuda_init() creates a "mos6522-cuda" device, but it's never realized.
Affects machines mac99 with via=cuda (default) and g3beige.

pmu_init() creates a "mos6522-pmu" device, but it's never realized.
Affects machine mac99 with via=pmu and via=pmu-adb,

In theory, a device becomes real only on realize.  In practice, the
transition from unreal to real is a fuzzy one.  The work to make a
device real can be spread between realize methods (fine),
instance_init methods (wrong), and board code wiring up the device
(fine as long as it effectively happens on realize).  Depending on
what exactly is done where, a device can work even when we neglect
to realize it.

These two appear to work.  Nevertheless, it's a clear misuse of the
interface.  Even when it works today (more or less by chance), it can
break tomorrow.

Fix by realizing them in cuda_realize() and pmu_realize(),
respectively.

Fixes: 6dca62a000
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200609122339.937862-10-armbru@redhat.com>
2020-06-15 21:36:21 +02:00
Markus Armbruster
5e769ecf50 mac_via: Fix to realize "mos6522-q800-via*" devices
mac_via_realize() creates a "mos6522-q800-via1" and a
"mos6522-q800-via2" device, but neglects to realize them.  Affects
machine q800.

In theory, a device becomes real only on realize.  In practice, the
transition from unreal to real is a fuzzy one.  The work to make a
device real can be spread between realize methods (fine),
instance_init methods (wrong), and board code wiring up the device
(fine as long as it effectively happens on realize).  Depending on
what exactly is done where, a device can work even when we neglect
to realize it.

These two appear to work.  Nevertheless, it's a clear misuse of the
interface.  Even when it works today (more or less by chance), it can
break tomorrow.

Fix by realizing them right away.

Fixes: 6dca62a000
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20200609122339.937862-9-armbru@redhat.com>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Laurent Vivier <laurent@vivier.eu>
2020-06-15 21:36:09 +02:00
Markus Armbruster
6b888ee28c auxbus: Fix aux-to-i2c-bridge to be a subtype of aux-slave
We plug aux-to-i2c-bridge into the aux-bus, even though its
DeviceClass member bus_type is null, not TYPE_AUX_BUS.  Fix that by
deriving it from TYPE_AUX_SLAVE instead of TYPE_DEVICE.

Cc: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200609122339.937862-8-armbru@redhat.com>
2020-06-15 21:36:09 +02:00
Peter Maydell
77c9e078b4 Trivial branch pull request 20200610
Convert DPRINTF() to traces or qemu_logs
 Use IEC binary prefix definitions
 Use qemu_semihosting_log_out() in target/unicore32
 Some code and doc cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl7g21QSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L7484YgP/jxlYNoSz3574j//OWJQnaprEjpI0EWT
 MWkLb2sKnVAUyoJYLFGRuYl/aAOQvHqGcBUAsUzGWWUdq2HhTI1WlP1pIcxOodsm
 aM0X6UOhuRs7zQDqZHPLUYoNEb/hpxj7RP0pUgh1JXaWucPoCznyZImPLJKIwkDz
 bCS+H1HPRWc9IIb2wkMSfRMGy1gz+bP6Z/uaWLdwwWo/q2uoZ8LZVFmJ5owe5HPG
 eA6alLdG1ZDn8XvUZYUoRZENFRxAz/gDtX2S1e3huej582sBNxfwH65+Y9dMs1Bo
 FoihF1nKRjHejCyyO76QxkEuzgDxnw2w87WrEYBLUsWP1XeZfpb73wMO+1Z++IDL
 8oLYZv310wQv7LJtlmKFb4tlFWJ5DLqwV7J0L03zUQ6zgZRMzQiDlogvJiWMKvv9
 JLKQzUZsoKr9BjVUjYGO1PFW90koKDROHKM+ifBml8L1aIYbyOkq93b64qogik0L
 Vt7n5nPK8ATD0QzZSmwaQL7Fj2ATh6KRdA1CWya3i4YvP91p5o0n87+k0IMbOXgT
 aqB+d6nr8+CQDe6tudvmg8I45CV9uN9x4dnrKS+NVJrK/cogpOXiYovJ275FJkTE
 Cu77eOWFYgImVxScAI2qvmvNqEzaLS9pSRNfOqGVz0JiTb/rWIRSugz7cvHdgQ2U
 4OdHx1J3tupw
 =jkE3
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging

Trivial branch pull request 20200610

Convert DPRINTF() to traces or qemu_logs
Use IEC binary prefix definitions
Use qemu_semihosting_log_out() in target/unicore32
Some code and doc cleanup

# gpg: Signature made Wed 10 Jun 2020 14:08:36 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.1-pull-request:
  semihosting: remove the pthread include which seems unused
  hw/openrisc/openrisc_sim: Add assertion to silence GCC warning
  target/unicore32: Prefer qemu_semihosting_log_out() over curses
  target/unicore32: Replace DPRINTF() by qemu_log_mask(GUEST_ERROR)
  target/unicore32: Remove unused headers
  target/i386/cpu: Use the IEC binary prefix definitions
  hw/i386/xen/xen-hvm: Use the IEC binary prefix definitions
  hw/hppa/dino: Use the IEC binary prefix definitions
  hw/arm/aspeed: Correct DRAM container region size
  qemu-img: Fix doc typo for 'bitmap' subcommand
  hw/misc/auxbus: Use qemu_log_mask(UNIMP) instead of debug printf
  hw/isa/apm: Convert debug printf()s to trace events
  hw/unicore32/puv3: Use qemu_log_mask(ERROR) instead of debug printf()
  .mailmap: Update Fred Konrad email address
  net: Do not include a newline in the id of -nic devices
  Fix parameter type in vhost migration log path

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	.mailmap
2020-06-11 19:22:52 +01:00
Philippe Mathieu-Daudé
d263425bce hw/misc/auxbus: Use qemu_log_mask(UNIMP) instead of debug printf
Replace a deprecated DPRINTF() call by qemu_log_mask(LOG_UNIMP).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200606070216.30952-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-09 19:14:47 +02:00
Philippe Mathieu-Daudé
3b34ee6780 hw/unicore32/puv3: Use qemu_log_mask(ERROR) instead of debug printf()
Replace some debug printf() calls by qemu_log_mask(LOG_GUEST_ERROR).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200524164503.11944-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-09 19:01:56 +02:00
Philippe Mathieu-Daudé
d15188ddcf hw/misc/grlib_ahb_apb_pnp: Add trace events on read accesses
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-5-f4bug@amsat.org>
2020-06-09 09:21:10 +02:00
Philippe Mathieu-Daudé
1a5a557088 hw/misc/grlib_ahb_apb_pnp: Fix AHB PnP 8-bit accesses
The Plug & Play region of the AHB/APB bridge can be accessed
by various word size, however the implementation is clearly
restricted to 32-bit:

  static uint64_t grlib_ahb_pnp_read(void *opaque, hwaddr offset, unsigned size)
  {
      AHBPnp *ahb_pnp = GRLIB_AHB_PNP(opaque);

      return ahb_pnp->regs[offset >> 2];
  }

Similarly to commit 0fbe394a64 with the APB PnP registers,
set the MemoryRegionOps::impl min/max fields to 32-bit, so
memory.c::access_with_adjusted_size() can adjust when the
access is not 32-bit.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-4-f4bug@amsat.org>
2020-06-09 09:21:10 +02:00
Philippe Mathieu-Daudé
bb15013ef3 hw/misc/grlib_ahb_apb_pnp: Avoid crash when writing to AHB PnP registers
Similarly to commit 158b659451 with the APB PnP registers, guests
can crash QEMU when writting to the AHB PnP registers:

  $ echo 'writeb 0xfffff042 69' | qemu-system-sparc -M leon3_generic -S -bios /etc/magic -qtest stdio
  [I 1571938309.932255] OPENED
  [R +0.063474] writeb 0xfffff042 69
  Segmentation fault (core dumped)

  (gdb) bt
  #0  0x0000000000000000 in  ()
  #1  0x0000562999110df4 in memory_region_write_with_attrs_accessor
      (mr=mr@entry=0x56299aa28ea0, addr=66, value=value@entry=0x7fff6abe13b8, size=size@entry=1, shift=<optimized out>, mask=mask@entry=255, attrs=...) at memory.c:503
  #2  0x000056299911095e in access_with_adjusted_size
      (addr=addr@entry=66, value=value@entry=0x7fff6abe13b8, size=size@entry=1, access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=access_fn@entry=
      0x562999110d70 <memory_region_write_with_attrs_accessor>, mr=0x56299aa28ea0, attrs=...) at memory.c:539
  #3  0x0000562999114fba in memory_region_dispatch_write (mr=mr@entry=0x56299aa28ea0, addr=66, data=<optimized out>, op=<optimized out>, attrs=attrs@entry=...) at memory.c:1482
  #4  0x00005629990c0860 in flatview_write_continue
      (fv=fv@entry=0x56299aa7d8a0, addr=addr@entry=4294963266, attrs=..., ptr=ptr@entry=0x7fff6abe1540, len=len@entry=1, addr1=<optimized out>, l=<optimized out>, mr=0x56299aa28ea0)
      at include/qemu/host-utils.h:164
  #5  0x00005629990c0a76 in flatview_write (fv=0x56299aa7d8a0, addr=4294963266, attrs=..., buf=0x7fff6abe1540, len=1) at exec.c:3165
  #6  0x00005629990c4c1b in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., attrs@entry=..., buf=buf@entry=0x7fff6abe1540, len=len@entry=1) at exec.c:3256
  #7  0x000056299910f807 in qtest_process_command (chr=chr@entry=0x5629995ee920 <qtest_chr>, words=words@entry=0x56299acfcfa0) at qtest.c:437

Instead of crashing, log the access as unimplemented.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-3-f4bug@amsat.org>
2020-06-09 09:21:10 +02:00
Philippe Mathieu-Daudé
28c78fe818 hw/misc/empty_slot: Name the slots when created
Directly set the slot name when creating the device,
to display the device name in trace events.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-8-f4bug@amsat.org>
2020-06-09 06:59:44 +02:00
Philippe Mathieu-Daudé
6007523a80 hw/misc/empty_slot: Move the 'hw/misc' and cover in MAINTAINERS
Add an entry for the 'empty_slot' device.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-7-f4bug@amsat.org>
2020-06-09 06:59:44 +02:00
Paul Zimmerman
3d46938bbb raspi: add BCM2835 SOC MPHI emulation
Add BCM2835 SOC MPHI (Message-based Parallel Host Interface)
emulation. It is very basic, only providing the FIQ interrupt
needed to allow the dwc-otg USB host controller driver in the
Raspbian kernel to function.

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Acked-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200520235349.21215-2-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-05 17:23:09 +01:00
Guenter Roeck
37f95959c7 hw: Move i.MX watchdog driver to hw/watchdog
In preparation for a full implementation, move i.MX watchdog driver
from hw/misc to hw/watchdog. While at it, add the watchdog files
to MAINTAINERS.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200517162135.110364-2-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21 20:00:18 +01:00
Philippe Mathieu-Daudé
8e5c952b37 hw: Remove unnecessary DEVICE() cast
The DEVICE() macro is defined as:

  #define DEVICE(obj) OBJECT_CHECK(DeviceState, (obj), TYPE_DEVICE)

which expands to:

  ((DeviceState *)object_dynamic_cast_assert((Object *)(obj), (name),
                                             __FILE__, __LINE__,
                                             __func__))

This assertion can only fail when @obj points to something other
than its stated type, i.e. when we're in undefined behavior country.

Remove the unnecessary DEVICE() casts when we already know the
pointer is of DeviceState type.

Patch created mechanically using spatch with this script:

  @@
  typedef DeviceState;
  DeviceState *s;
  @@
  -   DEVICE(s)
  +   s

Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200512070020.22782-4-f4bug@amsat.org>
2020-05-15 07:08:52 +02:00
Markus Armbruster
d2623129a7 qom: Drop parameter @errp of object_property_add() & friends
The only way object_property_add() can fail is when a property with
the same name already exists.  Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.

Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent.  Parentage is
also under program control, so this is a programming error, too.

We have a bit over 500 callers.  Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.

The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.

Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.  ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.

When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.

Drop parameter @errp and assert the preconditions instead.

There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification".  Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
2020-05-15 07:07:58 +02:00
Joel Stanley
f4ab4f8e77 aspeed: sdmc: Implement AST2600 locking behaviour
The AST2600 handles this differently with the extra 'hardlock' state, so
move the testing to the soc specific class' write callback.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200505090136.341426-1-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11 11:00:37 +01:00
Joel Stanley
7582591ae7 aspeed: Support AST2600A1 silicon revision
There are minimal differences from Qemu's point of view between the A0
and A1 silicon revisions.

As the A1 exercises different code paths in u-boot it is desirable to
emulate that instead.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200504093703.261135-1-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11 11:00:26 +01:00
Damien Hedde
38867cb7ec hw/misc/zynq_slcr: add clock generation for uarts
Add some clocks to zynq_slcr
+ the main input clock (ps_clk)
+ the reference clock outputs for each uart (uart0 & 1)

This commit also transitional the slcr to multi-phase reset as it is
required to initialize the clocks correctly.

The clock frequencies are computed using the internal pll & uart configuration
registers and the input ps_clk frequency.

Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200406135251.157596-7-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-04-30 15:35:41 +01:00
Niek Linnenbank
34d8df2a1d hw/misc/allwinner-h3-dramc: enforce 64-bit multiply when calculating row mirror address
The allwinner_h3_dramc_map_rows function simulates row addressing behavior
when bootloader software attempts to detect the amount of available SDRAM.

Currently the line that calculates the 64-bit address of the mirrored row
uses a signed 32-bit multiply operation that in theory could result in the
upper 32-bit be all 1s. This commit ensures that the row mirror address
is calculated using only 64-bit operations.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200323192944.5967-1-nieklinnenbank@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-30 13:18:58 +01:00
Philippe Mathieu-Daudé
6111a0c0ed hw/arm/bcm283x: Correct the license text
The license is the 'GNU General Public License v2.0 or later',
not 'and':

  This program is free software; you can redistribute it and/ori
  modify it under the terms of the GNU General Public License as
  published by the Free Software Foundation; either version 2 of
  the License, or (at your option) any later version.

Fix the license comment.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200312213455.15854-1-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-23 17:22:30 +00:00
Peter Maydell
cf4b64406c Error reporting patches for 2020-03-17
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl5w+zkSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTaeAQALPrnwX3g9/HLm2YHc1P0TB1eTenBqen
 K204sRW53waxzm4g9trb8P4Nzmp8r1oGmZfPriVzB3ykoW2Kzfu+4oa95+YT+exk
 H4XSQfCvCp1e/ZShkx5rY9Kg1gSgWhQ00MNwz8puHUsHtcp5dMTkmYqL4hzgWnA0
 TwV7w06+6kLP4fRglIc5X7BVggBKosmMPfvjg/KYUe12Z3moSSQZA5dyEp5VAVl9
 MNFJpryWVek6+Z8UFiQ3CMmR/H2UVI0liDlU1aZsR9pcyjiuJxrBEwboVO5qY3N7
 lraKg+CVdiK7rn21bs6wAFOk08eG8VqZMeTb7HU6KJ6FIP2KopwvRXIEmNgo2C/C
 xU3XRl5oyRtaAOKSnwOBzEhZZ+wTRp2RcMzFS6p7URm5R3LNfB1dlqE7yE5z4lcl
 EgdbMLy4LiMkKwUPrVGBwzZNDO6ywVjFWUcHze9Dyb3z1ciWhwEENaIGe0CU3lhG
 ii+GxTzMTGoeJ2HE2hRmGTLACNt7a/we88aDY0kDLeVz5rq80oa+xckqV/oG3XpN
 v/imWHMugdsUwmQshUrT0JQq+BCnuwiHc82pm0X8bTqtJ6TmoIYhxuJkh040QIxt
 5ymFfAMz7ysc+50JY7OEVRI/8YQPyCaZmst/D42dicWUU9NdasWcIx+kCmK3LOjj
 0/Nb4vfX3xgN
 =vpk3
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2020-03-17' into staging

Error reporting patches for 2020-03-17

# gpg: Signature made Tue 17 Mar 2020 16:30:49 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-error-2020-03-17:
  hw/sd/ssi-sd: fix error handling in ssi_sd_realize
  xen-block: Use one Error * variable instead of two
  hw/misc/ivshmem: Use one Error * variable instead of two
  Use &error_abort instead of separate assert()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-18 17:57:40 +00:00
Markus Armbruster
364effc0eb hw/misc/ivshmem: Use one Error * variable instead of two
Commit fe44dc9180 "migration: disallow migrate_add_blocker during
migration" accidentally added a second Error * variable.  Use the
first one instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200313170517.22480-3-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-03-17 16:05:49 +01:00
Felipe Franciosi
64a7b8de42 qom/object: Use common get/set uint helpers
Several objects implemented their own uint property getters and setters,
despite them being straightforward (without any checks/validations on
the values themselves) and identical across objects. This makes use of
an enhanced API for object_property_add_uintXX_ptr() which offers
default setters.

Some of these setters used to update the value even if the type visit
failed (eg. because the value being set overflowed over the given type).
The new setter introduces a check for these errors, not updating the
value if an error occurred. The error is propagated.

Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16 23:02:24 +01:00
Philippe Mathieu-Daudé
f7795e4096 misc: Replace zero-length arrays with flexible array member (automatic)
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):

--v-- description start --v--

  The current codebase makes use of the zero-length array language
  extension to the C90 standard, but the preferred mechanism to
  declare variable-length types such as these ones is a flexible
  array member [1], introduced in C99:

  struct foo {
      int stuff;
      struct boo array[];
  };

  By making use of the mechanism above, we will get a compiler
  warning in case the flexible array does not occur last in the
  structure, which will help us prevent some kind of undefined
  behavior bugs from being unadvertenly introduced [2] to the
  Linux codebase from now on.

--^-- description end --^--

Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).

All these instances of code were found with the help of the
following Coccinelle script:

  @@
  identifier s, m, a;
  type t, T;
  @@
   struct s {
      ...
      t m;
  -   T a[0];
  +   T a[];
  };
  @@
  identifier s, m, a;
  type t, T;
  @@
   struct s {
      ...
      t m;
  -   T a[0];
  +   T a[];
   } QEMU_PACKED;

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1

Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16 22:07:42 +01:00
Peter Maydell
d4f7d56759 target-arm queue:
* Fix various bugs that might result in an assert() due to
    incorrect hflags for M-profile CPUs
  * Fix Aspeed SMC Controller user-mode select handling
  * Report correct (with-tag) address in fault address register
    when TBI is enabled
  * cubieboard: make sure SOC object isn't leaked
  * fsl-imx25: Wire up eSDHC controllers
  * fsl-imx25: Wire up USB controllers
  * New board model: orangepi-pc (OrangePi PC)
  * ARM/KVM: if user doesn't select GIC version and the
    host kernel can only provide GICv3, use that, rather
    than defaulting to "fail because GICv2 isn't possible"
  * kvm: Only do KVM_SET_VCPU_EVENTS at the last stage of sync
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl5qZsIZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3krfD/40xprKOtpel6si3edDQsw5
 j6LamqJDvaUdtG713OjR6yjvvQiXCw9yCDlfGhBlLhLW1t0aGKrrZoRC4CNMOt0J
 34WAcDP0iz3ALEwpfNfr/DWFwiGjamabrRsGcq08Q42G7+UA7FhUEvL25ZApfRFy
 8O2gs3bDv30pfa5oJwYJhvSHcNeR9YKueK+WGw16gRkSoNbjUxnSpyiGnxbMaNpg
 aL+ZQzQ0BOAyeOg/0LUdZ9meAvWwR0NppgK0ujJxq68/6tPz8tv2+pQgllNYSQRO
 vDr4mj6MlJNW62M5IAKRZ/6zTz34+7UYQ7mTK2VTWt2qtfrANz+EpcDljtc/8EIF
 lAVd1W099DNdqgFcUGZzoWyRbmjz9B76WTJ43orY5AbMZN5l4XwAGItkE6yQbqKd
 kqPKP2ICFj/0JhgBoTzo0J/5wV2izZKKnih990IJU390oWoiVRbdWlQDJ2ujQ3AV
 havWhR/tL399K1UZl8act/J9rifq9J3mbiqpx2XEEiFMu93FDNCPtJioix1Swvpx
 ERMB9VA6JNAHZ6oAGgNmTHG3nSJtpcin8XxR5YcKWSYiksPjkce1sEwtRbyxBHtq
 jb/yk5mjyrbYTy3Gmg85/Fh74XnELsnwmADFdezHXUu4EPxth/ssCuXlXs8DIciI
 sWGFVJpDoWSXEqi4FjvhIQ==
 =LLqm
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200312' into staging

target-arm queue:
 * Fix various bugs that might result in an assert() due to
   incorrect hflags for M-profile CPUs
 * Fix Aspeed SMC Controller user-mode select handling
 * Report correct (with-tag) address in fault address register
   when TBI is enabled
 * cubieboard: make sure SOC object isn't leaked
 * fsl-imx25: Wire up eSDHC controllers
 * fsl-imx25: Wire up USB controllers
 * New board model: orangepi-pc (OrangePi PC)
 * ARM/KVM: if user doesn't select GIC version and the
   host kernel can only provide GICv3, use that, rather
   than defaulting to "fail because GICv2 isn't possible"
 * kvm: Only do KVM_SET_VCPU_EVENTS at the last stage of sync

# gpg: Signature made Thu 12 Mar 2020 16:43:46 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200312: (36 commits)
  target/arm: kvm: Inject events at the last stage of sync
  hw/arm/virt: kvm: allow gicv3 by default if v2 cannot work
  hw/arm/virt: kvm: Restructure finalize_gic_version()
  target/arm/kvm: Let kvm_arm_vgic_probe() return a bitmap
  hw/arm/virt: Introduce finalize_gic_version()
  hw/arm/virt: Introduce VirtGICType enum type
  hw/arm/virt: Document 'max' value in gic-version property description
  docs: add Orange Pi PC document
  tests/boot_linux_console: Test booting NetBSD via U-Boot on OrangePi PC
  tests/boot_linux_console: Add a SLOW test booting Ubuntu on OrangePi PC
  tests/boot_linux_console: Add a SD card test for the OrangePi PC board
  tests/boot_linux_console: Add initrd test for the Orange Pi PC board
  tests/boot_linux_console: Add a quick test for the OrangePi PC board
  hw/arm/allwinner: add RTC device support
  hw/arm/allwinner-h3: add SDRAM controller device
  hw/arm/allwinner-h3: add Boot ROM support
  hw/arm/allwinner-h3: add EMAC ethernet device
  hw/arm/allwinner: add SD/MMC host controller
  hw/arm/allwinner: add Security Identifier device
  hw/arm/allwinner: add CPU Configuration module
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 17:34:34 +00:00
Niek Linnenbank
b71d0385e9 hw/arm/allwinner-h3: add SDRAM controller device
In the Allwinner H3 SoC the SDRAM controller is responsible
for interfacing with the external Synchronous Dynamic Random
Access Memory (SDRAM). Types of memory that the SDRAM controller
supports are DDR2/DDR3 and capacities of up to 2GiB. This commit
adds emulation support of the Allwinner H3 SDRAM controller.

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-12-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Niek Linnenbank
6556617ce1 hw/arm/allwinner: add Security Identifier device
The Security Identifier device found in various Allwinner System on Chip
designs gives applications a per-board unique identifier. This commit
adds support for the Allwinner Security Identifier using a 128-bit
UUID value as input.

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-8-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Niek Linnenbank
d26af5ded9 hw/arm/allwinner: add CPU Configuration module
Various Allwinner System on Chip designs contain multiple processors
that can be configured and reset using the generic CPU Configuration
module interface. This commit adds support for the Allwinner CPU
configuration interface which emulates the following features:

 * CPU reset
 * CPU status

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-7-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Niek Linnenbank
7e83c9ddbb hw/arm/allwinner-h3: add System Control module
The Allwinner H3 System on Chip has an System Control
module that provides system wide generic controls and
device information. This commit adds support for the
Allwinner H3 System Control module.

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200311221854.30370-6-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Niek Linnenbank
fef06c8b1b hw/arm/allwinner-h3: add Clock Control Unit
The Clock Control Unit is responsible for clock signal generation,
configuration and distribution in the Allwinner H3 System on Chip.
This commit adds support for the Clock Control Unit which emulates
a simple read/write register interface.

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200311221854.30370-4-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Laurent Vivier
80aab795f8 q800: fix coverity warning CID 1412799
Check the return value of blk_write() and log an error if any

Fixes: Coverity CID 1412799 (Error handling issues)
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200210132252.381343-1-laurent@vivier.eu>
2020-03-12 16:05:48 +01:00
Paolo Bonzini
9e264985ff Merge branch 'exec_rw_const_v4' of https://github.com/philmd/qemu into HEAD 2020-02-25 13:41:48 +01:00
Paolo Bonzini
ca6155c0f2 Merge tag 'patchew/20200219160953.13771-1-imammedo@redhat.com' of https://github.com/patchew-project/qemu into HEAD
This series removes ad hoc RAM allocation API (memory_region_allocate_system_memory)
and consolidates it around hostmem backend. It allows to

* resolve conflicts between global -mem-prealloc and hostmem's "policy" option,
  fixing premature allocation before binding policy is applied

* simplify complicated memory allocation routines which had to deal with 2 ways
  to allocate RAM.

* reuse hostmem backends of a choice for main RAM without adding extra CLI
  options to duplicate hostmem features.  A recent case was -mem-shared, to
  enable vhost-user on targets that don't support hostmem backends [1] (ex: s390)

* move RAM allocation from individual boards into generic machine code and
  provide them with prepared MemoryRegion.

* clean up deprecated NUMA features which were tied to the old API (see patches)
  - "numa: remove deprecated -mem-path fallback to anonymous RAM"
  - (POSTPONED, waiting on libvirt side) "forbid '-numa node,mem' for 5.0 and newer machine types"
  - (POSTPONED) "numa: remove deprecated implicit RAM distribution between nodes"

Introduce a new machine.memory-backend property and wrapper code that aliases
global -mem-path and -mem-alloc into automatically created hostmem backend
properties (provided memory-backend was not set explicitly given by user).
A bulk of trivial patches then follow to incrementally convert individual
boards to using machine.memory-backend provided MemoryRegion.

Board conversion typically involves:

* providing MachineClass::default_ram_size and MachineClass::default_ram_id
  so generic code could create default backend if user didn't explicitly provide
  memory-backend or -m options

* dropping memory_region_allocate_system_memory() call

* using convenience MachineState::ram MemoryRegion, which points to MemoryRegion
   allocated by ram-memdev

On top of that for some boards:

* missing ram_size checks are added (typically it were boards with fixed ram size)

* ram_size fixups are replaced by checks and hard errors, forcing user to
  provide correct "-m" values instead of ignoring it and continuing running.

After all boards are converted, the old API is removed and memory allocation
routines are cleaned up.
2020-02-25 09:19:00 +01:00
Philippe Mathieu-Daudé
9df7401b80 hw/misc/iotkit-secctl: Fix writing to 'PPC Interrupt Clear' register
Fix warning reported by Clang static code analyzer:

    CC      hw/misc/iotkit-secctl.o
  hw/misc/iotkit-secctl.c:343:9: warning: Value stored to 'value' is never read
          value &= 0x00f000f3;
          ^        ~~~~~~~~~~

Fixes: b3717c23e1
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200217132922.24607-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-21 16:07:00 +00:00
Joel Stanley
7ffe647f52 aspeed/scu: Implement chip ID register
This returns a fixed but non-zero value for the chip id.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200121013302.43839-3-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-21 16:06:59 +00:00
Joel Stanley
c7e1f57291 aspeed/scu: Create separate write callbacks
This splits the common write callback into separate ast2400 and ast2500
implementations. This makes it clearer when implementing differing
behaviour.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200121013302.43839-2-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-21 16:06:59 +00:00
Philippe Mathieu-Daudé
85eb7c18ee Let cpu_[physical]_memory() calls pass a boolean 'is_write' argument
Use an explicit boolean type.

This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-20 14:47:08 +01:00
Igor Mammedov
533eb415df arm/aspeed: actually check RAM size
It's supposed that SOC will check if "-m" provided
RAM size is valid by setting "ram-size" property and
then board would read back valid (possibly corrected
value) to map RAM MemoryReging with valid size.
It isn't doing so, since check is called only
indirectly from
  aspeed_sdmc_reset()->asc->compute_conf()
or much later when guest writes to configuration
register.

So depending on "-m" value QEMU end-ups with a warning
and an invalid MemoryRegion size allocated and mapped.
(examples:
 -M ast2500-evb -m 1M
    0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container
      0000000080000000-00000000800fffff (prio 0, ram): ram
      0000000080100000-00000000bfffffff (prio 0, i/o): max_ram
 -M ast2500-evb -m 3G
    0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container
      0000000080000000-000000013fffffff (prio 0, ram): ram
      [DETECTED OVERFLOW!] 0000000140000000-00000000bfffffff (prio 0, i/o): max_ram
)
On top of that sdmc falls back and reports to guest
"default" size, it thinks machine should have.

This patch makes ram-size check actually work and
changes behavior from a warning later on during
machine reset to error_fatal at the moment SOC.ram-size
is set so user will have to fix RAM size on CLI
to start machine.

It also gets out of the way mutable ram-size logic,
so we could consolidate RAM allocation logic around
pre-allocated hostmem backend (supplied by user or
auto created by generic machine code depending on
supplied -m/mem-path/mem-prealloc options.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-10-imammedo@redhat.com>
2020-02-19 16:49:54 +00:00
Roman Kapl
0e7bb14b56 i.MX: Fix inverted register bits in wdt code.
Documentation says for WDA '0: Assert WDOG output.' and for SRS
'0: Assert system reset signal.'.

Signed-off-by: Roman Kapl <rka@sysgo.com>
Message-id: 20200207095409.11227-1-rka@sysgo.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-13 14:14:52 +00:00
Joel Stanley
a90d8f8467 misc/pca9552: Add qom set and get
Following the pattern of the work recently done with the ASPEED GPIO
model, this adds support for inspecting and modifying the PCA9552 LEDs
from the monitor.

 (qemu) qom-set  /machine/unattached/device[17] led0 on
 (qemu) qom-set  /machine/unattached/device[17] led0 off
 (qemu) qom-set  /machine/unattached/device[17] led0 pwm0
 (qemu) qom-set  /machine/unattached/device[17] led0 pwm1

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200114103433.30534-6-clg@kaod.org
[clg: - removed the "qom-get" examples from the commit log
      - merged memory leak fixes from Joel ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30 16:02:02 +00:00
Peter Maydell
760df0d121 * Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
 * virtio-scsi fix (Pan Nengyuan)
 * Tweak Skylake-v3 model id (Kashyap)
 * x86 UCODE_REV support and nested live migration fix (myself)
 * Advisory mode for pvpanic (Zhenwei)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJeK1CXAAoJEL/70l94x66DXtkIAI6W5wEY0Yme4M9Q5mGc0RV8
 uscPLg0wsg88u6xne8ucCiGymvDREym2ii/aVI0Hi5ish84ZMdCrdck9cd+llpMf
 +a3slL26AKlOW8WtYSuyAE1RdLFXngeXdwal5KtWPEExJorkDUPTbwhBzQduQK1a
 myoHHcbwdd/96v7FvKnfG8jM6KZtHPQQ0i6+6fX4PN44jaULQNjze8GIrRBEwqw5
 uCKJFQPBXiVcxKjH5/kzI1vl2hLJbF2ZGVEzX/U8OPZwyGPHIkWquURo8lvUTPfb
 ySlNTUTV2CyrN65TBRXQp/mJi44WvME5Jxlf5rNLBaYXPpL0zhmILKn5X5ya4U0=
 =TD0Y
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)

# gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (58 commits)
  build-sys: clean up flags included in the linker command line
  target/i386: Add the 'model-id' for Skylake -v3 CPU models
  qdev: use object_property_help()
  qapi/qmp: add ObjectPropertyInfo.default-value
  qom: introduce object_property_help()
  qom: simplify qmp_device_list_properties()
  vl: print default value in object help
  qdev: register properties as class properties
  qdev: move instance properties to class properties
  qdev: rename DeviceClass.props
  qdev: set properties with device_class_set_props()
  object: return self in object_ref()
  object: release all props
  object: add object_class_property_add_link()
  object: express const link with link property
  object: add direct link flag
  object: rename link "child" to "target"
  object: check strong flag with &
  object: do not free class properties
  object: add object_property_set_default
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-27 09:44:04 +00:00
Marc-André Lureau
4f67d30b5e qdev: set properties with device_class_set_props()
The following patch will need to handle properties registration during
class_init time. Let's use a device_class_set_props() setter.

spatch --macro-file scripts/cocci-macro-file.h  --sp-file
./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place
--dir .

@@
typedef DeviceClass;
DeviceClass *d;
expression val;
@@
- d->props = val
+ device_class_set_props(d, val)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:15 +01:00
zhenwei pi
7dc58deea7 pvpanic: implement crashloaded event handling
Handle bit 1 write, then post event to monitor.

Suggested by Paolo, declear a new event, using GUEST_PANICKED could
cause upper layers to react by shutting down or rebooting the guest.

In advance for extention, add GuestPanicInformation in event message.

Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20200114023102.612548-3-pizhenwei@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:07 +01:00
Philippe Mathieu-Daudé
a4abb6f206 hw/misc/stm32f4xx_syscfg: Fix copy/paste error
Missed in 870c034da0, hopefully reported by Coverity.

Fixes: Coverity CID 1412793 (Incorrect expression)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200121213853.9601-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-23 15:34:04 +00:00
Peter Xu
1df2c9a26f migration: Define VMSTATE_INSTANCE_ID_ANY
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to
auto-generate the vmstate instance ID.  Previously it was hard coded
as -1 instead of this macro.  It helps to change this default value in
the follow up patches.  No functional change.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20 09:10:23 +01:00
Martin Kaiser
f03965490e i.MX: add an emulation for RNGC
Add an emulation for the RNGC random number generator and the compatible
RNGB variant. These peripherals are included (at least) in imx25 and
imx35 chipsets.

The emulation supports the initial self test, reseeding the prng and
reading random numbers.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-17 14:27:16 +00:00
Alistair Francis
e64d8c83f9 hw/misc: Add the STM32F4xx EXTI device
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ef941d59fd8658589d34ed432e1d6dfdcf7fb1d0.1576658572.git.alistair@alistair23.me
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-17 14:09:29 +00:00
Alistair Francis
870c034da0 hw/misc: Add the STM32F4xx Sysconfig device
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 49b01423a09cef2ca832ff73a84a996568f1a8fc.1576658572.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-17 14:09:29 +00:00
Laurent Vivier
068fe58cf9 mos6522: remove anh register
Register addr 1 is defined as buffer A with handshake (vBufAH),
register addr 15 is also defined as buffer A without handshake (vBufA).

As both addresses access the same register, remove the definition of
'anh' and use only 'a' (with VIA_REG_ANH and VIA_REG_A).

Fixes: 51f233ec92 ("misc: introduce new mos6522 VIA device and enable it for ppc builds")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191220214054.76525-1-laurent@vivier.eu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-08 11:01:59 +11:00
Laurent Vivier
eb064db94c q800: add a block backend to the PRAM
This allows to save and restore the content of the PRAM.
It may be useful if we want to check the configuration or to change it.

The backend is added using mtd interface, for instance:

    ... -drive file=pram.img,format=raw,if=mtd ...

where pram.img is the file where the data will be stored, its size must
be 256 bytes.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191219201439.84804-3-laurent@vivier.eu>
2020-01-07 13:35:53 +01:00
Laurent Vivier
b2619c158a q800: fix mac_via RTC PRAM commands
The command byte is not decoded correctly.

This patch reworks the RTC/PRAM interface and fixes the problem.
It adds a comment before the function to explain how are encoded commands
and some trace-events to ease debugging.

Bug: https://bugs.launchpad.net/qemu/+bug/1856549
Fixes: 6dca62a000 ("hw/m68k: add VIA support")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20191219201439.84804-2-laurent@vivier.eu>
2020-01-07 13:35:53 +01:00
Marc-André Lureau
3cad405bab vmstate: replace DeviceState with VMStateIf
Replace DeviceState dependency with VMStateIf on vmstate API.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
2020-01-06 18:41:32 +04:00
Markus Armbruster
e858e04dd4 hw/misc/ivshmem: Bury dead legacy INTx code
Devices "ivshmem-plain" and "ivshmem-doorbell" support only MSI-X.
Config space register Interrupt Pin is zero.  Device "ivshmem"
additionally supported legacy INTx, but it was removed in commit
5a0e75f0a9 "hw/misc/ivshmem: Remove deprecated "ivshmem" legacy
device".  The commit left ivshmem_update_irq() behind.  Since the
Interrupt Pin register is zero, the function does nothing.  Remove it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191205203557.11254-1-armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-12-17 09:05:23 +01:00
Joel Stanley
310b5bc692 aspeed/scu: Fix W1C behavior
This models the clock write one to clear registers, and fixes up some
incorrect behavior in all of the write to clear registers.

There was also a typo in one of the register definitions.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20191119141211.25716-8-clg@kaod.org
[clg: checkpatch.pl fixes ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16 10:46:34 +00:00
Joel Stanley
d3ff9e69b7 aspeed/sdmc: Make ast2600 default 1G
Most boards have this much.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20191119141211.25716-7-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16 10:46:34 +00:00
Laurent Vivier
6cf80f90c4 mos6522: update counters when timer interrupts are off
Even if the interrupts are off, counters must be updated because
they are running anyway and kernel can try to read them
(it's the case with g3beige kernel).

Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191125141414.5015-1-laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-11-26 10:11:50 +11:00
Peter Maydell
bbe165740a ppc patch queue 2019-11-15
Several fixes for 4.2.0-rc2:
 
 fix mos6522 performance issue,
 xive/xics issues,
 fix /chosen device-tree on reset
 and KVM default cpu-model for all machine classes
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl3Sd+MTHGx2aXZpZXJA
 cmVkaGF0LmNvbQAKCRDzDDi9Py++PJV0EACL450uGT2R41he9H69sCH5x7KXcAt1
 V2fFMySJdNnDZTbvFu3ou7CtXFZ9qw6Gy1N4dWam+PgKxgY2zP0NWe1dsW31N/+6
 NiRBaCavMtqGGWdNbUY0SrpfmWnrXiVlv1/2EWn9dC8JsCPVCLDd7TdZqWvb7sLT
 MNrjAJh+Uqok/p4u8ap6of5gv/X3+iYqqY9967kQpeEA9nF0F/c5fKMqWHNRUxcW
 bYPcvBM4Ud+slUfPIQ9qjUaXj5UXQzgOtT4XOzF81z5JEO/cfHXFyFYt/r8KC6B8
 gXl4X9vRAdcVJJk272UGLdDON3xXem+IfAsqE481Auh7LdqEW/El+m0njm6Zjyg2
 I+JNs/GwHjhM9Ta7RwACn1ihr3figRHJiRpHlFIn6olvH3lQ0yqgPrp1BYH6XPoT
 hSGgTZ1hR8NZfkzEaU8tCE1F/EIGghfHGdUNMuN3QuBublUfacMQvpIN9s8g8K2S
 mm22lgpOrqgv0hmsQwlPgYzxO/KB2o2Xyt7yV83wVdutHMCqrmmeyIzoB1cJG3Ky
 k9CWS99fGWTngli+bzMumeKBgWdRpkehQNneoKJuZgJhZ/DpVs7X2SDvyBHXjjTN
 KLrph1cusEyzCP6eR8EsZNvABSfHv9i7alqpE7lHZOdM2Sg0KTl7C0NSxHGMm7uK
 c4sfoSLg0vjyyA==
 =Ykn6
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/ppc-for-4.2-pull-request' into staging

ppc patch queue 2019-11-15

Several fixes for 4.2.0-rc2:

fix mos6522 performance issue,
xive/xics issues,
fix /chosen device-tree on reset
and KVM default cpu-model for all machine classes

# gpg: Signature made Mon 18 Nov 2019 10:52:19 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "lvivier@redhat.com"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/ppc-for-4.2-pull-request:
  mos6522: fix T1 and T2 timers
  spapr/kvm: Set default cpu model for all machine classes
  spapr: Add /chosen to FDT only at reset time to preserve kernel and initramdisk
  ppc: Skip partially initialized vCPUs in 'info pic'
  xive, xics: Fix reference counting on CPU objects
  ppc: Add intc_destroy() handlers to SpaprInterruptController/PnvChip

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-18 11:09:06 +00:00
Laurent Vivier
cd8843ff25 mos6522: fix T1 and T2 timers
With the Quadra 800 emulation, mos6522 timers processing can consume
until 70% of the host CPU time with an idle guest (I guess the problem
should also happen with PowerMac emulation).

On a recent system, it can be painless (except if you look at top), but
on an old host like a PowerMac G5 the guest kernel can be terribly slow
during the boot sequence (for instance, unpacking initramfs can take 15
seconds rather than only 3 seconds).

We can avoid this CPU overload by enabling QEMU internal timers only if
the mos6522 counter interrupts are enabled. Sometime the guest kernel
wants to read the counters values, but we don't need the timers to
update the counters.

With this patch applied, an idle Q800 consumes only 3% of host CPU time
(and the guest can boot in a decent time).

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191102154919.17775-1-laurent@vivier.eu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
2019-11-18 11:50:49 +01:00
Philippe Mathieu-Daudé
0fbe394a64 hw/misc/grlib_ahb_apb_pnp: Fix 8-bit accesses
The Plug & Play region of the AHB/APB bridge can be accessed
by various word size, however the implementation is clearly
restricted to 32-bit:

  static uint64_t grlib_apb_pnp_read(void *opaque, hwaddr offset, unsigned size)
  {
      APBPnp *apb_pnp = GRLIB_APB_PNP(opaque);

      return apb_pnp->regs[offset >> 2];
  }

Set the MemoryRegionOps::impl min/max fields to 32-bit, so
memory.c::access_with_adjusted_size() can adjust when the
access is not 32-bit.

This is required to run RTEMS on leon3, the grlib scanning
functions do byte accesses.

Reported-by: Jiri Gaisler <jiri@gaisler.se>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20191025110114.27091-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-11-05 15:02:33 +01:00
Philippe Mathieu-Daudé
158b659451 hw/misc/grlib_ahb_apb_pnp: Avoid crash when writing to PnP registers
Guests can crash QEMU when writting to PnP registers:

  $ echo 'writeb 0x800ff042 69' | qemu-system-sparc -M leon3_generic -S -bios /etc/magic -qtest stdio
  [I 1571938309.932255] OPENED
  [R +0.063474] writeb 0x800ff042 69
  Segmentation fault (core dumped)

  (gdb) bt
  #0  0x0000000000000000 in  ()
  #1  0x0000555f4bcdf0bc in memory_region_write_with_attrs_accessor (mr=0x555f4d7be8c0, addr=66, value=0x7fff07d00f08, size=1, shift=0, mask=255, attrs=...) at memory.c:503
  #2  0x0000555f4bcdf185 in access_with_adjusted_size (addr=66, value=0x7fff07d00f08, size=1, access_size_min=1, access_size_max=4, access_fn=0x555f4bcdeff4 <memory_region_write_with_attrs_accessor>, mr=0x555f4d7be8c0, attrs=...) at memory.c:539
  #3  0x0000555f4bce2243 in memory_region_dispatch_write (mr=0x555f4d7be8c0, addr=66, data=69, op=MO_8, attrs=...) at memory.c:1489
  #4  0x0000555f4bc80b20 in flatview_write_continue (fv=0x555f4d92c400, addr=2148528194, attrs=..., buf=0x7fff07d01120 "E", len=1, addr1=66, l=1, mr=0x555f4d7be8c0) at exec.c:3161
  #5  0x0000555f4bc80c65 in flatview_write (fv=0x555f4d92c400, addr=2148528194, attrs=..., buf=0x7fff07d01120 "E", len=1) at exec.c:3201
  #6  0x0000555f4bc80fb0 in address_space_write (as=0x555f4d7aa460, addr=2148528194, attrs=..., buf=0x7fff07d01120 "E", len=1) at exec.c:3291
  #7  0x0000555f4bc8101d in address_space_rw (as=0x555f4d7aa460, addr=2148528194, attrs=..., buf=0x7fff07d01120 "E", len=1, is_write=true) at exec.c:3301
  #8  0x0000555f4bcdb388 in qtest_process_command (chr=0x555f4c2ed7e0 <qtest_chr>, words=0x555f4db0c5d0) at qtest.c:432

Instead of crashing, log the access as unimplemented.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20191025110114.27091-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-11-05 15:01:43 +01:00
Peter Maydell
f724de8dde Add Macintosh Quadra 800 machine in hw/m68k
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl23MAESHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748UPQQAIfzpB0KRb7InPFNUgGvShoCwKXQmbZm
 wkYoPdDnzgy3FBdbkFM0YcvvSH7Cnbq1njwaTOp8li+NBBiyZCqbCMBKLOusKqhR
 tlP/vF/Jj+o7pbggS+ruSYTtT0+4Q8T5AKEmWmm6ga+PhpT8kFCL+jC8j5bUTmDX
 0lTGwzANDNjGllP+aS6qhY1j9PEWcUpOWr42hW9ZXhAStsPOSzaV7SAZ2XZKPVJz
 KSdnsCPHJVzF4Ps6QK9iMw8szVGat/fq8UU/9w1o2HkmkTRNRW6vuagxmAG1iheW
 fPSpxNnXtoZqTY/qSP9/mMv8cntOtV5YjA/fAeSBa24vY/JFE/zstOrWUY0yhV2y
 CdllFzd/4duR5EThIatJZ4CE3ye89O4or73706l6fnpCI6+UADbneI+0I6VV0fyJ
 I+BxokoI4IgheYOkxD/oxGVx14Ax5vI+R4DkJ09m2koL9h/mALXKeKjb277sJJA/
 GrRx9ttdCGYp7beD84u38aSvNZ9Cs3foljBIYKH6/GqUY5Hl1FlFPE5cDRa+p/yR
 UA/ZDZ4FnJkyhg6Y5mrE8Fx7dvax+9QapKhPqeC9uEuLvUz8yPquMcICx8ehRnNx
 bl0IISTDZvIJwb8ZzemvWHPz63GfQzD1nJjxLZ8c4Q4XYtktETr45tYJd61vuV8x
 gzf/MzaBXSkX
 =HLjK
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier/tags/q800-branch-pull-request' into staging

Add Macintosh Quadra 800 machine in hw/m68k

# gpg: Signature made Mon 28 Oct 2019 18:14:25 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/q800-branch-pull-request:
  BootLinuxConsoleTest: Test the Quadra 800
  hw/m68k: define Macintosh Quadra 800
  hw/m68k: add a dummy SWIM floppy controller
  hw/m68k: add Nubus macfb video card
  hw/m68k: add Nubus support
  hw/m68k: implement ADB bus support for via
  hw/m68k: add VIA support
  dp8393x: manage big endian bus
  esp: add pseudo-DMA as used by Macintosh
  esp: move get_cmd() post-DMA code to get_cmd_cb()
  esp: move handle_ti_cmd() cleanup code to esp_do_dma().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-29 16:27:48 +00:00
Laurent Vivier
87a34e2adb hw/m68k: implement ADB bus support for via
VIA needs to be able to poll the ADB interface and to read/write data
from/to the bus.

This patch adds functions allowing that.

Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20191026164546.30020-7-laurent@vivier.eu>
2019-10-28 19:06:45 +01:00
Laurent Vivier
6dca62a000 hw/m68k: add VIA support
Inside the 680x0 Macintosh, VIA (Versatile Interface Adapter) is used
to interface the keyboard, Mouse, and real-time clock. It also provides
control line for the floppy disk driver, video interface, sound circuitry
and serial interface.

This implementation is based on the MOS6522 object.

Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20191026164546.30020-6-laurent@vivier.eu>
2019-10-28 19:06:42 +01:00
Paolo Bonzini
673652a785 Merge commit 'df84f17' into HEAD
This merge fixes a semantic conflict with the trivial tree.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-26 15:38:02 +02:00
Philippe Mathieu-Daudé
99c641370b hw/misc/bcm2835_thermal: Add a dummy BCM2835 thermal sensor
We will soon implement the SYS_timer. This timer is used by Linux
in the thermal subsystem, so once available, the subsystem will be
enabled and poll the temperature sensors. We need to provide the
minimum required to keep Linux booting.

Add a dummy thermal sensor returning ~25°C based on:
https://github.com/raspberrypi/linux/blob/rpi-5.3.y/drivers/thermal/broadcom/bcm2835_thermal.c

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25 13:09:27 +01:00
Thomas Huth
372a87a1d9 Do not use %m in common code to print error messages
The %m format specifier is an extension from glibc - and when compiling
QEMU for NetBSD, the compiler correctly complains, e.g.:

/home/qemu/qemu-test.ELjfrQ/src/util/main-loop.c: In function 'sigfd_handler':
/home/qemu/qemu-test.ELjfrQ/src/util/main-loop.c:64:13: warning: %m is only
 allowed in syslog(3) like functions [-Wformat=]
             printf("read from sigfd returned %zd: %m\n", len);
             ^
Let's use g_strerror() here instead, which is an easy-to-use wrapper
around the thread-safe strerror_r() function.

While we're at it, also convert the "printf()" in main-loop.c into
the preferred "error_report()".

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191018130716.25438-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22 09:38:42 +02:00
Philippe Mathieu-Daudé
88552b16f2 hw/misc/vmcoreinfo: Add comment about reset handler
The VM coreinfo device does not sit on a bus, so it won't be
reset automatically. This is why it calls qemu_register_reset().

Add a comment about it, so we don't convert its reset handler
to a DeviceReset method.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191010131527.32513-9-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-10-15 18:18:08 -03:00
Philippe Mathieu-Daudé
19845504da hw/misc/bcm2835_mbox: Add trace events
Add trace events for read/write accesses and IRQ.

Properties are structures used for the ARM particular MBOX.
Since one call in bcm2835_property.c concerns the mbox block,
name this trace event in the same bcm2835_mbox* namespace.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190926173428.10713-8-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15 18:09:05 +01:00
Philippe Mathieu-Daudé
e55a8b3790 hw/arm/bcm2835_peripherals: Name various address spaces
Various address spaces from the BCM2835 are reported as
'anonymous' in memory tree:

  (qemu) info mtree

  address-space: anonymous
    0000000000000000-000000000000008f (prio 0, i/o): bcm2835-mbox
      0000000000000010-000000000000001f (prio 0, i/o): bcm2835-fb
      0000000000000080-000000000000008f (prio 0, i/o): bcm2835-property

  address-space: anonymous
    0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu
      0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff
      0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff

  [...]

Since the address_space_init() function takes a 'name' argument,
set it to correctly describe each address space:

  (qemu) info mtree

  address-space: bcm2835-mbox-memory
    0000000000000000-000000000000008f (prio 0, i/o): bcm2835-mbox
      0000000000000010-000000000000001f (prio 0, i/o): bcm2835-fb
      0000000000000080-000000000000008f (prio 0, i/o): bcm2835-property

  address-space: bcm2835-fb-memory
    0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu
      0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff
      0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff

  address-space: bcm2835-property-memory
    0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu
      0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff
      0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff

  address-space: bcm2835-dma-memory
    0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu
      0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff
      0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20190926173428.10713-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15 18:09:05 +01:00
Philippe Mathieu-Daudé
e1ecf8c802 hw/arm/bcm2835_peripherals: Improve logging
Various logging improvements as once:
- Use 0x prefix for hex numbers
- Display value written during write accesses
- Move some logs from GUEST_ERROR to UNIMP

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20190926173428.10713-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15 18:09:05 +01:00
Joel Stanley
1550d72679 aspeed/sdmc: Add AST2600 support
The AST2600 SDMC controller is slightly different from its predecessor
(DRAM training). Max memory is now 2G on the AST2600.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190925143248.10000-10-clg@kaod.org
[clg: - improved commit log
      - reworked model integration into new object class ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15 18:09:04 +01:00
Cédric Le Goater
8e00d1a97d aspeed/sdmc: Introduce an object class per SoC
Use class handlers and class constants to differentiate the
characteristics of the memory controller and remove the 'silicon_rev'
property.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190925143248.10000-9-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15 18:09:04 +01:00
Joel Stanley
e09cf36321 hw: aspeed_scu: Add AST2600 support
The SCU controller on the AST2600 SoC has extra registers. Increase
the number of regs of the model and introduce a new field in the class
to customize the MemoryRegion operations depending on the SoC model.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190925143248.10000-4-clg@kaod.org
[clg: - improved commit log
      - changed vmstate version
      - reworked model integration into new object class
      - included AST2600_HPLL_PARAM value ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15 18:09:04 +01:00
Philippe Mathieu-Daudé
794dcb54b3 trace: Remove trailing newline in events
While the tracing framework does not forbid trailing newline in
events format string, using them lead to confuse output.
It is the responsibility of the backend to properly end an event
line.

Some of our formats have trailing newlines, remove them.

[Fixed typo in commit description reported by Eric Blake
<eblake@redhat.com>
--Stefan]

Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190916095121.29506-2-philmd@redhat.com
Message-Id: <20190916095121.29506-2-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-09-18 10:19:47 +01:00
Cédric Le Goater
a8f07376c9 aspeed/scu: Introduce a aspeed_scu_get_apb_freq() routine
The APB frequency can be calculated directly when needed from the
HPLL_PARAM and CLK_SEL register values. This removes useless state in
the model.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190904070506.1052-11-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13 16:05:01 +01:00
Cédric Le Goater
9a937f6cc4 aspeed/scu: Introduce per-SoC SCU types
and use a class AspeedSCUClass to define each SoC characteristics.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190904070506.1052-10-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13 16:05:01 +01:00
Thomas Huth
4030289a44 hw/misc: Mark most objects as "common" code to speed up compilation a litte bit
Most of the code in hw/misc/ does not directly depend on CPU-specific
code. Mark it as "common" so that the code can be shared between e.g.
qemu-system-arm and qemu-system-aarch64, or between the various mips
flavours, instead of recompiling it for each and every target again
and again.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190902162638.28142-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-09-10 09:38:33 +01:00
Markus Armbruster
2e5b09fd0e hw/core: Move cpu.c, cpu.h from qom/ to hw/core/
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
2019-08-21 13:24:01 +02:00
Thomas Huth
5aa78a8957 hw/misc: Add a config switch for the "unimplemented" device
The device is only used by some few boards. Let's use a proper Kconfig
switch so that we only compile this code if we really need it.

Message-Id: <20190817101931.28386-8-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-08-20 09:11:17 +02:00
Peter Maydell
afd7605393 target-arm queue:
* target/arm: generate a custom MIDR for -cpu max
  * hw/misc/zynq_slcr: refactor to use standard register definition
  * Set ENET_BD_BDU in I.MX FEC controller
  * target/arm: Fix routing of singlestep exceptions
  * refactor a32/t32 decoder handling of PC
  * minor optimisations/cleanups of some a32/t32 codegen
  * target/arm/cpu64: Ensure kvm really supports aarch64=off
  * target/arm/cpu: Ensure we can use the pmu with kvm
  * target/arm: Minor cleanups preparatory to KVM SVE support
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl1WrIsZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3tJ/D/9I0ccyciHwuekySUHs+Wq6
 2grX8t6RFzlhA1ULoAaEO4x8uWWGnbiGTeSGM819T3nj1a7neQV12Xe5RRGG0j7n
 aeVseYnZF96oshKPkDSVTcGQisVfmmHIJ0oqx2k1aUGrmyFJlTuLWQBZCCiZKhxA
 zA6YzUbOA2apfi9nun6SbbjysiRD2lp2i9vI79nVlo+ca77v/1sdFUwzg0hRE//X
 IondHeWtCZScmc/GwABv4EdNzQ4Aerfe10v/pOKXEC59rPwEiaiSGBPu6SRUaGWH
 qHlwjVU2+BFGkz9Oy/7+tDTBk6saPi4taZF8SxxiC/QTyNV2ijyKV5iy9KOYAFw7
 E41fhv4+Kch569/SX7fiyAxL0gAS2HGFtegByuQEgjjioOCRugFcX275NXvuW06j
 jfOP/zSD9P39WA0jCJaNj5FdJTcLmIuFxKjBUEX3Cdb+3igIq1BW0ZFd/OOBoo1W
 GHcEmO6tLyx35kigOb3TkayQpkqCoaGCcgzJ0g2Oy06rKwlcci+BfCfc3aG+uSSY
 +TuGjRhpQxQJJt880d7tBqeH9R5FABvQ0TEwGuACylDEZM5bN7BpZxCxCVN/bFG+
 pzvzs/QtOq0FN7LK4L4rbuJui4nBhAyalbiIXQ8ihWQgmMqaYQSK8mXFgSZgizFl
 qATcYIr/q2gL4wHRos3XdA==
 =8BAF
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190816' into staging

target-arm queue:
 * target/arm: generate a custom MIDR for -cpu max
 * hw/misc/zynq_slcr: refactor to use standard register definition
 * Set ENET_BD_BDU in I.MX FEC controller
 * target/arm: Fix routing of singlestep exceptions
 * refactor a32/t32 decoder handling of PC
 * minor optimisations/cleanups of some a32/t32 codegen
 * target/arm/cpu64: Ensure kvm really supports aarch64=off
 * target/arm/cpu: Ensure we can use the pmu with kvm
 * target/arm: Minor cleanups preparatory to KVM SVE support

# gpg: Signature made Fri 16 Aug 2019 14:15:55 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20190816: (29 commits)
  target/arm: Use tcg_gen_extrh_i64_i32 to extract the high word
  target/arm: Simplify SMMLA, SMMLAR, SMMLS, SMMLSR
  target/arm: Use tcg_gen_rotri_i32 for gen_swap_half
  target/arm: Use ror32 instead of open-coding the operation
  target/arm: Remove redundant shift tests
  target/arm: Use tcg_gen_deposit_i32 for PKHBT, PKHTB
  target/arm: Use tcg_gen_extract_i32 for shifter_out_im
  target/arm/kvm64: Move the get/put of fpsimd registers out
  target/arm/kvm64: Fix error returns
  target/arm/cpu: Use div-round-up to determine predicate register array size
  target/arm/helper: zcr: Add build bug next to value range assumption
  target/arm/cpu: Ensure we can use the pmu with kvm
  target/arm/cpu64: Ensure kvm really supports aarch64=off
  target/arm: Remove helper_double_saturate
  target/arm: Use unallocated_encoding for aarch32
  target/arm: Remove offset argument to gen_exception_bkpt_insn
  target/arm: Replace offset with pc in gen_exception_internal_insn
  target/arm: Replace offset with pc in gen_exception_insn
  target/arm: Replace s->pc with s->base.pc_next
  target/arm: Remove redundant s->pc & ~1
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16 17:21:40 +01:00
Damien Hedde
a6b3ed2348 hw/misc/zynq_slcr: use standard register definition
Replace the zynq_slcr registers enum and macros using the
hw/registerfields.h macros.

Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20190729145654.14644-30-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16 14:02:48 +01:00
Markus Armbruster
54d31236b9 sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator.  Evidence:

* It's included widely: in my "build everything" tree, changing
  sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
  objects (not counting tests and objects that don't depend on
  qemu/osdep.h, down from 5400 due to the previous two commits).

* It pulls in more than a dozen additional headers.

Split stuff related to run state management into its own header
sysemu/runstate.h.

Touching sysemu/sysemu.h now recompiles some 850 objects.  qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200.  Touching new sysemu/runstate.h recompiles some 500 objects.

Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
2019-08-16 13:37:36 +02:00
Markus Armbruster
2f780b6a91 sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 1800 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h, down from 5400 due to the
previous commit).

Several headers include sysemu/sysemu.h just to get typedef
VMChangeStateEntry.  Move it from sysemu/sysemu.h to qemu/typedefs.h.
Spell its structure tag the same while there.  Drop the now
superfluous includes of sysemu/sysemu.h from headers.

Touching sysemu/sysemu.h now recompiles some 1100 objects.
qemu/uuid.h also drops from 1800 to 1100, and
qapi/qapi-types-run-state.h from 5000 to 4400.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-29-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster
d5938f29fe Clean up inclusion of sysemu/sysemu.h
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Almost a third of its inclusions are actually superfluous.  Delete
them.  Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.

hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it.  The compiler is cool with that, but include it anyway.

This doesn't reduce actual use much, as it's still included into
widely included headers.  The next commit will tackle that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16 13:31:53 +02:00
Markus Armbruster
a27bd6c779 Include hw/qdev-properties.h less
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h.  Include hw/qdev-core.h there
instead.

hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.

While there, delete a few superfluous inclusions of hw/qdev-core.h.

Touching hw/qdev-properties.h now recompiles some 1200 objects.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster
db72581598 Include qemu/main-loop.h less
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).  It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.

Include qemu/main-loop.h only where it's needed.  Touching it now
recompiles only some 1700 objects.  For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800.  For the
others, they shrink only slightly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
650d103d3e Include hw/hw.h exactly where needed
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h.  This permits dropping most of its inclusions.  Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
d645427057 Include migration/vmstate.h less
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get VMStateDescription.  The previous commit made
that unnecessary.

Include migration/vmstate.h only where it's still needed.  Touching it
now recompiles only some 1600 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
64552b6be4 Include hw/irq.h a lot less
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.

Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed.  Touching it now recompiles only some 500 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
71e8a91585 Include sysemu/reset.h a lot less
In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

The main culprit is hw/hw.h, which supposedly includes it for
convenience.

Include sysemu/reset.h only where it's needed.  Touching it now
recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Eddie James
118c82e7ff hw/misc/aspeed_xdma: New device
The XDMA engine embedded in the Aspeed SOCs performs PCI DMA operations
between the SOC (acting as a BMC) and a host processor in a server.

The XDMA engine exists on the AST2400, AST2500, and AST2600 SOCs, so
enable it for all of those. Add trace events on the important register
writes in the XDMA engine.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190618165311.27066-21-clg@kaod.org
[clg: - changed title ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:29:00 +01:00