Commit Graph

314 Commits

Author SHA1 Message Date
Benjamin Herrenschmidt
d29f086169 ppc/xics: Remove unused xics_set_irq_type()
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[dwg: Adjusted for context to apply without original series]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-27 13:13:30 +10:00
Peter Maydell
b0ad00b8c9 -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
 
 iQEcBAABAgAGBQJXaFInAAoJEJykq7OBq3PI6VsH/0Sfgbdo1RksYuQwb/y92sCW
 EN+lxUZ+OLfgrc8PYgNZwfSM3rsfYhznL0MAXOeEe7Ahabi07w7DhGR8WvwfAOlI
 G96FRuvrIPfv5u6U6fwS4CvG3TIHVLxfHKCsTpPUmH8U5CNx/x/tpjNiWN1dj6t+
 sXybSjYHfZfiZy2tI9MFIFWCdxnF/pl0QAPhbRqc8Y/RQTDrPKRjLpz+nitN/u96
 5TS7KlELyQuP91YMmLceYSmIkHbxW703h+iE2n4hov0uZCP8Jil+2Jsd3ziQSRlL
 j6LqexQ2ViBGdDSfiZGYES2VPlsHOCwb4G+IgWBStfZg1ppaXENvcDzPrgrB+L4=
 =eUnF
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

# gpg: Signature made Mon 20 Jun 2016 21:29:27 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request: (42 commits)
  trace: split out trace events for linux-user/ directory
  trace: split out trace events for qom/ directory
  trace: split out trace events for target-ppc/ directory
  trace: split out trace events for target-s390x/ directory
  trace: split out trace events for target-sparc/ directory
  trace: split out trace events for net/ directory
  trace: split out trace events for audio/ directory
  trace: split out trace events for ui/ directory
  trace: split out trace events for hw/alpha/ directory
  trace: split out trace events for hw/arm/ directory
  trace: split out trace events for hw/acpi/ directory
  trace: split out trace events for hw/vfio/ directory
  trace: split out trace events for hw/s390x/ directory
  trace: split out trace events for hw/pci/ directory
  trace: split out trace events for hw/ppc/ directory
  trace: split out trace events for hw/9pfs/ directory
  trace: split out trace events for hw/i386/ directory
  trace: split out trace events for hw/isa/ directory
  trace: split out trace events for hw/sd/ directory
  trace: split out trace events for hw/sparc/ directory
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-20 22:30:34 +01:00
Peter Maydell
7e13ea57f4 lm32/milkymist: some qomifying
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXaBmJAAoJELRYq7DY03jj6osP/Az+8Rkb8eL3hVzqDso6JZhx
 QMmp48ipNe7xWlTGjKrf6yUWyuehp7Hr2dlXkz6KG/Y/PQg15uMfH3ZlS0HzWuyO
 cSeRQsvNY759Wk7bnAzzuRK9eVxXJaSytodaA+swGo/7maDbMMXdv0gFa/qP6k1e
 4vc4mLoi3PX6GHuFsfWUaDkOkZpuhzsj3MxEEqDJd1TpiJzZIbJokk4bLUF89kCz
 tRGNUoUXJnWLigJYjOqXjg15Cue70ztiX3VE6LoI+TRe/RsJPLd+oCtij40Gah/S
 cOZUeuxIgLGDdkGoax+H/ymTjpTrHB4Mo8E7rtlwT/HYFti4ZzWeA9T3mJ9Zwc2F
 q4xU/St7dJYEOH37qNXKzyIWmQZxJKJOpOaOzasPbo76Bvt1X9d5+HuDOtf9ftWo
 LR/U+1MFxGId7TMM2/j+ziHKZcZWkGkpK7K0tScB6dM/yCxv1Qs5HuioqMNIvAgc
 Pe0bNAI5zSGX5ldqR/tPxL9b27PkqFs0a6itLOIv4tvashmnBfcDiaDMXmRc+hsb
 jJ7apWyEF3JOw9dKSpwgspPJHavYuRhohgfhuEpuwkcwc2QD3QdDrtlV6bxRhJoj
 yMZ5905B99LNCCGOszol1yMlzHLbGTmZVyhu8bL9930oxHgZzfOCQMFVtMMxaAp1
 0yEVhlbZ0JE7zpetAHeF
 =ggrO
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mwalle/tags/lm32-queue/20160620' into staging

lm32/milkymist: some qomifying

# gpg: Signature made Mon 20 Jun 2016 17:27:53 BST
# gpg:                using RSA key 0xB458ABB0D8D378E3
# gpg: Good signature from "Michael Walle <michael@walle.cc>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2190 3E48 4537 A7C2 90CE  3EB2 B458 ABB0 D8D3 78E3

* remotes/mwalle/tags/lm32-queue/20160620:
  milkymist: update specification URLs
  hw/intc: QOM'ify lm32_pic.c
  hw/display: QOM'ify milkymist-vgafb.c
  hw/display: QOM'ify milkymist-tmu2.c
  hw/timer: QOM'ify milkymist_sysctl
  hw/timer: QOM'ify lm32_timer

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-20 18:14:26 +01:00
Daniel P. Berrange
aebd4d17dc trace: split out trace events for hw/intc/ directory
Move all trace-events for files in the hw/intc/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-10-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:15 +01:00
xiaoqiang zhao
5e502d31db hw/intc: QOM'ify lm32_pic.c
Drop the old SysBus init function and use instance_init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Acked-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Michael Walle <michael@walle.cc>
2016-06-20 18:12:04 +02:00
Eduardo Habkost
9be385980d coccinelle: Remove unnecessary variables for function return value
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.

Manual fixups:

* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
  "remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
  want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
  statements

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-20 16:38:13 +02:00
Peter Maydell
b1e3493b25 hw/intc/arm_gicv3: Fix compilation with simple trace backend
Fix missing includes of qemu/log.h, which broke compilation with the
simple trace backend (the default backend pulls in log.h implicitly
via trace.h).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Tested-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-id: 1466416634-9798-1-git-send-email-peter.maydell@linaro.org
2016-06-20 11:35:15 +01:00
Peter Maydell
227a865366 hw/intc/arm_gicv3: Add IRQ handling CPU interface registers
Add the CPU interface registers which deal with acknowledging
and dismissing interrupts.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-19-git-send-email-peter.maydell@linaro.org
2016-06-17 15:23:51 +01:00
Peter Maydell
b1a0eb777d hw/intc/arm_gicv3: Implement CPU i/f SGI generation registers
Implement the registers in the GICv3 CPU interface which generate
new SGI interrupts.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-18-git-send-email-peter.maydell@linaro.org
2016-06-17 15:23:51 +01:00
Peter Maydell
f7b9358e2c hw/intc/arm_gicv3: Implement gicv3_cpuif_update()
Implement the gicv3_cpuif_update() function which deals with correctly
asserting IRQ and FIQ based on the current running priority of the CPU,
the priority of the highest priority pending interrupt and the CPU's
current exception level and security state.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-17-git-send-email-peter.maydell@linaro.org
2016-06-17 15:23:51 +01:00
Peter Maydell
359fbe65e0 hw/intc/arm_gicv3: Implement GICv3 CPU interface registers
Implement the CPU interface registers for the GICv3; these are
CPU system registers, not MMIO registers.

This commit implements all the registers which are simple
accessors for GIC state, but not those which act as interfaces
for acknowledging, dismissing or generating interrupts. (Those
will be added in a later commit.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-16-git-send-email-peter.maydell@linaro.org
2016-06-17 15:23:51 +01:00
Peter Maydell
c84428b33f hw/intc/arm_gicv3: Implement gicv3_set_irq()
Implement the code which updates the GIC state when an interrupt
input into the GIC is asserted.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-15-git-send-email-peter.maydell@linaro.org
2016-06-17 15:23:51 +01:00
Peter Maydell
287c181ae4 hw/intc/arm_gicv3: Wire up distributor and redistributor MMIO regions
Wire up the MMIO functions exposed by the distributor and the
redistributor into MMIO regions exposed by the GICv3 device.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-14-git-send-email-peter.maydell@linaro.org
2016-06-17 15:23:51 +01:00
Shlomo Pongratz
cec93a938a hw/intc/arm_gicv3: Implement GICv3 redistributor registers
Implement the redistributor registers of a GICv3.

Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465915112-29272-13-git-send-email-peter.maydell@linaro.org
[PMM: significantly overhauled/rewritten:
 * use the new data structures
 * restructure register read/write to handle different width accesses
   natively, since almost all registers are 32-bit only, rather
   than implementing everything as byte accesses
 * implemented security extension support
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-17 15:23:51 +01:00
Shlomo Pongratz
e52af51340 hw/intc/arm_gicv3: Implement GICv3 distributor registers
Implement the distributor registers of a GICv3.

Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465915112-29272-12-git-send-email-peter.maydell@linaro.org
[PMM: significantly overhauled/rewritten:
 * use the new bitmap data structures
 * restructure register read/write to handle different width accesses
   natively, since almost all registers are 32-bit only, rather
   than implementing everything as byte accesses
 * implemented security extension support
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-17 15:23:51 +01:00
Peter Maydell
ce187c3c15 hw/intc/arm_gicv3: Implement functions to identify next pending irq
Implement the GICv3 logic to recalculate the highest priority pending
interrupt for each CPU after some part of the GIC state has changed.
We avoid unnecessary full recalculation where possible.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-11-git-send-email-peter.maydell@linaro.org
2016-06-17 15:23:51 +01:00
Shlomo Pongratz
56992670a4 hw/intc/arm_gicv3: ARM GICv3 device framework
This patch includes the device class itself, some ID register
value functions which will be needed by both distributor
and redistributor, and some skeleton functions for handling
interrupts coming in and going out, which will be filled in
in a subsequent patch.

Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465915112-29272-10-git-send-email-peter.maydell@linaro.org
[PMM: pulled this patch earlier in the sequence, and left
 some code out of it for a later patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
2016-06-17 15:23:51 +01:00
Pavel Fedin
757caeed76 hw/intc/arm_gicv3: Add vmstate descriptors
Add state structure descriptors for the GICv3 state. We mark
the KVM GICv3 device as having a migration blocker until the
code to save and restore the state in the kernel is implemented.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465915112-29272-9-git-send-email-peter.maydell@linaro.org
[PMM: Adjust to renamed struct fields; switched to using uint32_t
 array backed bitmaps; add migration blocker setting]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-17 15:23:51 +01:00
Peter Maydell
3faf2b0cd5 hw/intc/arm_gicv3: Move irq lines into GICv3CPUState structure
Move the GICv3 parent_irq and parent_fiq pointers into the
GICv3CPUState structure rather than giving them their own array.
This will make it easy to assert the IRQ and FIQ lines for a
particular CPU interface without having to know or calculate
the CPU index for the GICv3CPUState we are working on.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-8-git-send-email-peter.maydell@linaro.org
2016-06-17 15:23:51 +01:00
Pavel Fedin
07e2034d08 hw/intc/arm_gicv3: Add state information
Add state information to GICv3 object structure and implement
arm_gicv3_common_reset().

This commit includes accessor functions for the fields which are
stored as bitmaps in uint32_t arrays.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465915112-29272-7-git-send-email-peter.maydell@linaro.org
[PMM: significantly overhauled:
 * Add missing qom/cpu.h include
 * Remove legacy-only state fields (we can add them later if/when we add
   legacy emulation)
 * Use arrays of uint32_t to store the various distributor bitmaps,
   and provide accessor functions for the various set/test/etc operations
 * Add various missing register offset #defines
 * Accessor macros which combine distributor and redistributor behaviour
   removed
 * Fields in state structures renamed to match architectural register names
 * Corrected the reset value for GICR_IENABLER0 since we don't support
   legacy mode
 * Added ARM_LINUX_BOOT_IF interface for "we are directly booting a kernel in
   non-secure" so that we can fake up the firmware-mandated reconfiguration
   only when we need it
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
2016-06-17 15:23:51 +01:00
Bharata B Rao
4a4b344c7c xics,xics_kvm: Handle CPU unplug correctly
XICS is setup for each CPU during initialization. Provide a routine
to undo the same when CPU is unplugged. While here, move ss->cs management
into xics from xics_kvm since there is nothing KVM specific in it.
Also ensure xics reset doesn't set irq for CPUs that are already unplugged.

This allows reboot of a VM that has undergone CPU hotplug and unplug
to work correctly.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-17 16:33:48 +10:00
Halil Pasic
9eccb8622c s390x/kvm: add interface for clearing IO irqs
According to the platform specification, under certain conditions,
pending IO interruptions have to be cleared. Let's add an interface
for that.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-14 13:34:50 +02:00
Peter Maydell
24a6e0633a hw: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07 18:19:23 +03:00
Jens Wiklander
fea8a08e16 hw/intc/gic: RAZ/WI non-sec access to sec interrupts
Treat non-secure accesses to registers and bits in registers of secure
interrupts as RAZ/WI.

Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Message-id: 1464273945-2055-1-git-send-email-jens.wiklander@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 16:59:29 +01:00
Peter Xu
ed1263c363 ioapic: clear remote irr bit for edge-triggered interrupts
This is to better emulate IOAPIC version 0x1X hardware. Linux kernel
leveraged this "feature" to do explicit EOI since EOI register is still
not introduced at that time. This will also fix the issue that level
triggered interrupts failed to work when IR enabled (tested with Linux
kernel version 4.5).

Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1462875682-1349-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-23 16:53:43 +02:00
Peter Xu
479c2a1cb7 ioapic: keep RO bits for IOAPIC entry
Currently IOAPIC RO bits can be written. To be better aligned with
hardware, we should let them read-only.

Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1462875682-1349-2-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-23 16:53:43 +02:00
Paolo Bonzini
22b31af26f aspeed: include qemu/log.h
This is not visible with the default "log" trace backend.  With other
backends however trace.h does not include qemu/log.h, resulting in
build failures.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1463745452-25831-2-git-send-email-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-20 13:09:22 +01:00
Paolo Bonzini
03dd024ff5 hw: explicitly include qemu/log.h
Move the inclusion out of hw/hw.h, most files do not need it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:29 +02:00
Paolo Bonzini
33c11879fd qemu-common: push cpu.h inclusion out of qemu-common.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:29 +02:00
Paolo Bonzini
77ac58ddc6 dma: do not depend on kvm_enabled()
Memory barriers are needed also by Xen and, when the ioeventfd
bugs are fixed, by TCG as well.

sysemu/kvm.h is not anymore needed in sysemu/dma.h, move it to
the actual users.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:28 +02:00
Paolo Bonzini
d613f8cc33 apic: move target-dependent definitions to cpu.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:28 +02:00
Paolo Bonzini
e81096b1c8 explicitly include linux/kvm.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:27 +02:00
Hollis Blanchard
2531088f6c hw/intc/arm_gic: add tracepoints
These are obviously critical to understanding interrupt delivery:
gic_enable_irq
gic_disable_irq
gic_set_irq (inbound irq from device models)
gic_update_set_irq (outbound irq to CPU)
gic_acknowledge_irq

The only one that I think might raise eyebrows is gic_update_bestirq, but I've
(sadly) debugged problems that ended up being caused by unexpected priorities.
Knowing that the GIC has an irq ready, but doesn't deliver to the CPU due to
priority, has also proven important.

Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Message-id: 1461252281-22399-1-git-send-email-hollis_blanchard@mentor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-05-16 17:20:41 -07:00
xiaoqiang zhao
0a750e2a78 hw/intc: QOM'ify omap_intc.c
* Split the old SysBus init into an instance_init and a
  DeviceClass::realize function
* Drop the old SysBus init function and use instance_init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12 13:22:25 +01:00
xiaoqiang.zhao
22c70d8a6a hw/intc: QOM'ify grlib_irqmp.c
* Split the old SysBus init into an instance_init and a
  DeviceClass::realize function
* Drop the old SysBus init function

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: corrected "can not" to "cannot" in error message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12 13:22:25 +01:00
xiaoqiang.zhao
c09008d2d3 hw/intc: QOM'ify slavio_intctl.c
Drop the old SysBus init function and use instance_init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12 13:22:25 +01:00
xiaoqiang.zhao
e3be8b4f4f hw/intc: QOM'ify pl190.c
Drop the old SysBus init function and use instance_init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12 13:22:25 +01:00
xiaoqiang.zhao
f777bda60f hw/intc: QOM'ify imx_avic.c
Drop the old SysBus init function and use instance_init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12 13:22:24 +01:00
xiaoqiang.zhao
68d71616c0 hw/intc: QOM'ify exynos4210_gic.c
* Drop the old SysBus init function and use instance_init
* Split the exynos4210_irq_gate_init into an instance_init
  and a DeviceClass::realize function

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12 13:22:24 +01:00
xiaoqiang.zhao
d3d5a6febd hw/intc: QOM'ify exynos4210_combiner.c
Drop the old SysBus init function and use instance_init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12 13:22:24 +01:00
xiaoqiang.zhao
b46818e9e7 hw/intc: QOM'ify etraxfs_pic.c
Drop the old SysBus init function and use instance_init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12 13:22:24 +01:00
Rutuja Shah
73bcb24d93 Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed.  This replacement improves the readability and
understandability of code.

For example,

    timer_mod(fdctrl->result_timer,
	      qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));

NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.

Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:17 +01:00
Paolo Bonzini
4771d756f4 hw: explicitly include qemu-common.h and cpu.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:17 +01:00
Markus Armbruster
da34e65cb4 include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:15 +01:00
Andrew Jeffery
0c69996e22 hw/intc: Add (new) ASPEED VIC device model
Implement a basic ASPEED VIC device model for the AST2400 SoC[1], with
enough functionality to boot an aspeed_defconfig Linux kernel. The model
implements the 'new' (revised) register set: While the hardware exposes
both the new and legacy register sets, accesses to the model's legacy
register set will not be serviced (however the access will be logged).

[1] http://www.aspeedtech.com/products.php?fPath=20&rId=376

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1458096317-25223-3-git-send-email-andrew@aj.id.au
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Michael S. Tsirkin
226419d615 msi_supported -> msi_nonbroken
Rename controller flag to make it clearer what it means.
Add some documentation as well.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11 16:45:21 +02:00
Peter Maydell
a55c910e0b hw/intc/arm_gic.c: Implement GICv2 GICC_DIR
The GICv2 introduces a new CPU interface register GICC_DIR, which
allows an OS to split the "priority drop" and "deactivate interrupt"
parts of interrupt completion. Implement this register.
(Note that the register is at offset 0x1000 in the CPU interface,
which means it is on a different 4K page from all the other registers.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1456854176-7813-1-git-send-email-peter.maydell@linaro.org
2016-03-04 11:30:22 +00:00
Greg Kurz
a005b3ef50 xics: report errors with the QEMU Error API
Using the return value to report errors is error prone:
- xics_alloc() returns -1 on error but spapr_vio_busdev_realize() errors
  on 0
- xics_alloc_block() returns the unclear value of ics->offset - 1 on error
  but both rtas_ibm_change_msi() and spapr_phb_realize() error on 0

This patch adds an errp argument to xics_alloc() and xics_alloc_block() to
report errors. The return value of these functions is a valid IRQ number
if errp is NULL. It is undefined otherwise.

The corresponding error traces get promotted to error messages. Note that
the "can't allocate IRQ" error message in spapr_vio_busdev_realize() also
moves to xics_alloc(). Similar error message consolidation isn't really
applicable to xics_alloc_block() because callers have extra context (device
config address, MSI or MSIX).

This fixes the issues mentioned above.

Based on previous work from Brian W. Hart.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-28 16:19:02 +11:00
Peter Maydell
c964b66022 all: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-16 14:29:28 +00:00
Eric Blake
d7bce9999d qom: Swap 'name' next to visitor in ObjectPropertyAccessor
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.

Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).

    @ rule1 @
    identifier fn;
    typedef Object, Visitor, Error;
    identifier obj, v, opaque, name, errp;
    @@
     void fn
    - (Object *obj, Visitor *v, void *opaque, const char *name,
    + (Object *obj, Visitor *v, const char *name, void *opaque,
       Error **errp) { ... }

    @@
    identifier rule1.fn;
    expression obj, v, opaque, name, errp;
    @@
     fn(obj, v,
    -   opaque, name,
    +   name, opaque,
        errp)

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08 17:29:56 +01:00