hw/intc/arm_gicv3: Implement GICv3 distributor registers
Implement the distributor registers of a GICv3. Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Tested-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1465915112-29272-12-git-send-email-peter.maydell@linaro.org [PMM: significantly overhauled/rewritten: * use the new bitmap data structures * restructure register read/write to handle different width accesses natively, since almost all registers are 32-bit only, rather than implementing everything as byte accesses * implemented security extension support ] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit is contained in:
Shlomo Pongratz
Peter Maydell
parent
ce187c3c15
commit
e52af51340
@ -14,6 +14,7 @@ common-obj-$(CONFIG_ARM_GIC) += arm_gic.o
|
||||
common-obj-$(CONFIG_ARM_GIC) += arm_gicv2m.o
|
||||
common-obj-$(CONFIG_ARM_GIC) += arm_gicv3_common.o
|
||||
common-obj-$(CONFIG_ARM_GIC) += arm_gicv3.o
|
||||
common-obj-$(CONFIG_ARM_GIC) += arm_gicv3_dist.o
|
||||
common-obj-$(CONFIG_OPENPIC) += openpic.o
|
||||
|
||||
obj-$(CONFIG_APIC) += apic.o apic_common.o
|
||||
|
||||
858
hw/intc/arm_gicv3_dist.c
Normal file
858
hw/intc/arm_gicv3_dist.c
Normal file
@ -0,0 +1,858 @@
|
||||
/*
|
||||
* ARM GICv3 emulation: Distributor
|
||||
*
|
||||
* Copyright (c) 2015 Huawei.
|
||||
* Copyright (c) 2016 Linaro Limited.
|
||||
* Written by Shlomo Pongratz, Peter Maydell
|
||||
*
|
||||
* This code is licensed under the GPL, version 2 or (at your option)
|
||||
* any later version.
|
||||
*/
|
||||
|
||||
#include "qemu/osdep.h"
|
||||
#include "trace.h"
|
||||
#include "gicv3_internal.h"
|
||||
|
||||
/* The GICD_NSACR registers contain a two bit field for each interrupt which
|
||||
* allows the guest to give NonSecure code access to registers controlling
|
||||
* Secure interrupts:
|
||||
* 0b00: no access (NS accesses to bits for Secure interrupts will RAZ/WI)
|
||||
* 0b01: NS r/w accesses permitted to ISPENDR, SETSPI_NSR, SGIR
|
||||
* 0b10: as 0b01, and also r/w to ICPENDR, r/o to ISACTIVER/ICACTIVER,
|
||||
* and w/o to CLRSPI_NSR
|
||||
* 0b11: as 0b10, and also r/w to IROUTER and ITARGETSR
|
||||
*
|
||||
* Given a (multiple-of-32) interrupt number, these mask functions return
|
||||
* a mask word where each bit is 1 if the NSACR settings permit access
|
||||
* to the interrupt. The mask returned can then be ORed with the GICD_GROUP
|
||||
* word for this set of interrupts to give an overall mask.
|
||||
*/
|
||||
|
||||
typedef uint32_t maskfn(GICv3State *s, int irq);
|
||||
|
||||
static uint32_t mask_nsacr_ge1(GICv3State *s, int irq)
|
||||
{
|
||||
/* Return a mask where each bit is set if the NSACR field is >= 1 */
|
||||
uint64_t raw_nsacr = s->gicd_nsacr[irq / 16 + 1];
|
||||
|
||||
raw_nsacr = raw_nsacr << 32 | s->gicd_nsacr[irq / 16];
|
||||
raw_nsacr = (raw_nsacr >> 1) | raw_nsacr;
|
||||
return half_unshuffle64(raw_nsacr);
|
||||
}
|
||||
|
||||
static uint32_t mask_nsacr_ge2(GICv3State *s, int irq)
|
||||
{
|
||||
/* Return a mask where each bit is set if the NSACR field is >= 2 */
|
||||
uint64_t raw_nsacr = s->gicd_nsacr[irq / 16 + 1];
|
||||
|
||||
raw_nsacr = raw_nsacr << 32 | s->gicd_nsacr[irq / 16];
|
||||
raw_nsacr = raw_nsacr >> 1;
|
||||
return half_unshuffle64(raw_nsacr);
|
||||
}
|
||||
|
||||
/* We don't need a mask_nsacr_ge3() because IROUTER<n> isn't a bitmap register,
|
||||
* but it would be implemented using:
|
||||
* raw_nsacr = (raw_nsacr >> 1) & raw_nsacr;
|
||||
*/
|
||||
|
||||
static uint32_t mask_group_and_nsacr(GICv3State *s, MemTxAttrs attrs,
|
||||
maskfn *maskfn, int irq)
|
||||
{
|
||||
/* Return a 32-bit mask which should be applied for this set of 32
|
||||
* interrupts; each bit is 1 if access is permitted by the
|
||||
* combination of attrs.secure, GICD_GROUPR and GICD_NSACR.
|
||||
*/
|
||||
uint32_t mask;
|
||||
|
||||
if (!attrs.secure && !(s->gicd_ctlr & GICD_CTLR_DS)) {
|
||||
/* bits for Group 0 or Secure Group 1 interrupts are RAZ/WI
|
||||
* unless the NSACR bits permit access.
|
||||
*/
|
||||
mask = *gic_bmp_ptr32(s->group, irq);
|
||||
if (maskfn) {
|
||||
mask |= maskfn(s, irq);
|
||||
}
|
||||
return mask;
|
||||
}
|
||||
return 0xFFFFFFFFU;
|
||||
}
|
||||
|
||||
static int gicd_ns_access(GICv3State *s, int irq)
|
||||
{
|
||||
/* Return the 2 bit NS_access<x> field from GICD_NSACR<n> for the
|
||||
* specified interrupt.
|
||||
*/
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
return 0;
|
||||
}
|
||||
return extract32(s->gicd_nsacr[irq / 16], (irq % 16) * 2, 2);
|
||||
}
|
||||
|
||||
static void gicd_write_set_bitmap_reg(GICv3State *s, MemTxAttrs attrs,
|
||||
uint32_t *bmp,
|
||||
maskfn *maskfn,
|
||||
int offset, uint32_t val)
|
||||
{
|
||||
/* Helper routine to implement writing to a "set-bitmap" register
|
||||
* (GICD_ISENABLER, GICD_ISPENDR, etc).
|
||||
* Semantics implemented here:
|
||||
* RAZ/WI for SGIs, PPIs, unimplemented IRQs
|
||||
* Bits corresponding to Group 0 or Secure Group 1 interrupts RAZ/WI.
|
||||
* Writing 1 means "set bit in bitmap"; writing 0 is ignored.
|
||||
* offset should be the offset in bytes of the register from the start
|
||||
* of its group.
|
||||
*/
|
||||
int irq = offset * 8;
|
||||
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
return;
|
||||
}
|
||||
val &= mask_group_and_nsacr(s, attrs, maskfn, irq);
|
||||
*gic_bmp_ptr32(bmp, irq) |= val;
|
||||
gicv3_update(s, irq, 32);
|
||||
}
|
||||
|
||||
static void gicd_write_clear_bitmap_reg(GICv3State *s, MemTxAttrs attrs,
|
||||
uint32_t *bmp,
|
||||
maskfn *maskfn,
|
||||
int offset, uint32_t val)
|
||||
{
|
||||
/* Helper routine to implement writing to a "clear-bitmap" register
|
||||
* (GICD_ICENABLER, GICD_ICPENDR, etc).
|
||||
* Semantics implemented here:
|
||||
* RAZ/WI for SGIs, PPIs, unimplemented IRQs
|
||||
* Bits corresponding to Group 0 or Secure Group 1 interrupts RAZ/WI.
|
||||
* Writing 1 means "clear bit in bitmap"; writing 0 is ignored.
|
||||
* offset should be the offset in bytes of the register from the start
|
||||
* of its group.
|
||||
*/
|
||||
int irq = offset * 8;
|
||||
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
return;
|
||||
}
|
||||
val &= mask_group_and_nsacr(s, attrs, maskfn, irq);
|
||||
*gic_bmp_ptr32(bmp, irq) &= ~val;
|
||||
gicv3_update(s, irq, 32);
|
||||
}
|
||||
|
||||
static uint32_t gicd_read_bitmap_reg(GICv3State *s, MemTxAttrs attrs,
|
||||
uint32_t *bmp,
|
||||
maskfn *maskfn,
|
||||
int offset)
|
||||
{
|
||||
/* Helper routine to implement reading a "set/clear-bitmap" register
|
||||
* (GICD_ICENABLER, GICD_ISENABLER, GICD_ICPENDR, etc).
|
||||
* Semantics implemented here:
|
||||
* RAZ/WI for SGIs, PPIs, unimplemented IRQs
|
||||
* Bits corresponding to Group 0 or Secure Group 1 interrupts RAZ/WI.
|
||||
* offset should be the offset in bytes of the register from the start
|
||||
* of its group.
|
||||
*/
|
||||
int irq = offset * 8;
|
||||
uint32_t val;
|
||||
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
return 0;
|
||||
}
|
||||
val = *gic_bmp_ptr32(bmp, irq);
|
||||
if (bmp == s->pending) {
|
||||
/* The PENDING register is a special case -- for level triggered
|
||||
* interrupts, the PENDING state is the logical OR of the state of
|
||||
* the PENDING latch with the input line level.
|
||||
*/
|
||||
uint32_t edge = *gic_bmp_ptr32(s->edge_trigger, irq);
|
||||
uint32_t level = *gic_bmp_ptr32(s->level, irq);
|
||||
val |= (~edge & level);
|
||||
}
|
||||
val &= mask_group_and_nsacr(s, attrs, maskfn, irq);
|
||||
return val;
|
||||
}
|
||||
|
||||
static uint8_t gicd_read_ipriorityr(GICv3State *s, MemTxAttrs attrs, int irq)
|
||||
{
|
||||
/* Read the value of GICD_IPRIORITYR<n> for the specified interrupt,
|
||||
* honouring security state (these are RAZ/WI for Group 0 or Secure
|
||||
* Group 1 interrupts).
|
||||
*/
|
||||
uint32_t prio;
|
||||
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
return 0;
|
||||
}
|
||||
|
||||
prio = s->gicd_ipriority[irq];
|
||||
|
||||
if (!attrs.secure && !(s->gicd_ctlr & GICD_CTLR_DS)) {
|
||||
if (!gicv3_gicd_group_test(s, irq)) {
|
||||
/* Fields for Group 0 or Secure Group 1 interrupts are RAZ/WI */
|
||||
return 0;
|
||||
}
|
||||
/* NS view of the interrupt priority */
|
||||
prio = (prio << 1) & 0xff;
|
||||
}
|
||||
return prio;
|
||||
}
|
||||
|
||||
static void gicd_write_ipriorityr(GICv3State *s, MemTxAttrs attrs, int irq,
|
||||
uint8_t value)
|
||||
{
|
||||
/* Write the value of GICD_IPRIORITYR<n> for the specified interrupt,
|
||||
* honouring security state (these are RAZ/WI for Group 0 or Secure
|
||||
* Group 1 interrupts).
|
||||
*/
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
return;
|
||||
}
|
||||
|
||||
if (!attrs.secure && !(s->gicd_ctlr & GICD_CTLR_DS)) {
|
||||
if (!gicv3_gicd_group_test(s, irq)) {
|
||||
/* Fields for Group 0 or Secure Group 1 interrupts are RAZ/WI */
|
||||
return;
|
||||
}
|
||||
/* NS view of the interrupt priority */
|
||||
value = 0x80 | (value >> 1);
|
||||
}
|
||||
s->gicd_ipriority[irq] = value;
|
||||
}
|
||||
|
||||
static uint64_t gicd_read_irouter(GICv3State *s, MemTxAttrs attrs, int irq)
|
||||
{
|
||||
/* Read the value of GICD_IROUTER<n> for the specified interrupt,
|
||||
* honouring security state.
|
||||
*/
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (!attrs.secure && !(s->gicd_ctlr & GICD_CTLR_DS)) {
|
||||
/* RAZ/WI for NS accesses to secure interrupts */
|
||||
if (!gicv3_gicd_group_test(s, irq)) {
|
||||
if (gicd_ns_access(s, irq) != 3) {
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
return s->gicd_irouter[irq];
|
||||
}
|
||||
|
||||
static void gicd_write_irouter(GICv3State *s, MemTxAttrs attrs, int irq,
|
||||
uint64_t val)
|
||||
{
|
||||
/* Write the value of GICD_IROUTER<n> for the specified interrupt,
|
||||
* honouring security state.
|
||||
*/
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
return;
|
||||
}
|
||||
|
||||
if (!attrs.secure && !(s->gicd_ctlr & GICD_CTLR_DS)) {
|
||||
/* RAZ/WI for NS accesses to secure interrupts */
|
||||
if (!gicv3_gicd_group_test(s, irq)) {
|
||||
if (gicd_ns_access(s, irq) != 3) {
|
||||
return;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
s->gicd_irouter[irq] = val;
|
||||
gicv3_cache_target_cpustate(s, irq);
|
||||
gicv3_update(s, irq, 1);
|
||||
}
|
||||
|
||||
static MemTxResult gicd_readb(GICv3State *s, hwaddr offset,
|
||||
uint64_t *data, MemTxAttrs attrs)
|
||||
{
|
||||
/* Most GICv3 distributor registers do not support byte accesses. */
|
||||
switch (offset) {
|
||||
case GICD_CPENDSGIR ... GICD_CPENDSGIR + 0xf:
|
||||
case GICD_SPENDSGIR ... GICD_SPENDSGIR + 0xf:
|
||||
case GICD_ITARGETSR ... GICD_ITARGETSR + 0x3ff:
|
||||
/* This GIC implementation always has affinity routing enabled,
|
||||
* so these registers are all RAZ/WI.
|
||||
*/
|
||||
return MEMTX_OK;
|
||||
case GICD_IPRIORITYR ... GICD_IPRIORITYR + 0x3ff:
|
||||
*data = gicd_read_ipriorityr(s, attrs, offset - GICD_IPRIORITYR);
|
||||
return MEMTX_OK;
|
||||
default:
|
||||
return MEMTX_ERROR;
|
||||
}
|
||||
}
|
||||
|
||||
static MemTxResult gicd_writeb(GICv3State *s, hwaddr offset,
|
||||
uint64_t value, MemTxAttrs attrs)
|
||||
{
|
||||
/* Most GICv3 distributor registers do not support byte accesses. */
|
||||
switch (offset) {
|
||||
case GICD_CPENDSGIR ... GICD_CPENDSGIR + 0xf:
|
||||
case GICD_SPENDSGIR ... GICD_SPENDSGIR + 0xf:
|
||||
case GICD_ITARGETSR ... GICD_ITARGETSR + 0x3ff:
|
||||
/* This GIC implementation always has affinity routing enabled,
|
||||
* so these registers are all RAZ/WI.
|
||||
*/
|
||||
return MEMTX_OK;
|
||||
case GICD_IPRIORITYR ... GICD_IPRIORITYR + 0x3ff:
|
||||
{
|
||||
int irq = offset - GICD_IPRIORITYR;
|
||||
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
return MEMTX_OK;
|
||||
}
|
||||
gicd_write_ipriorityr(s, attrs, irq, value);
|
||||
gicv3_update(s, irq, 1);
|
||||
return MEMTX_OK;
|
||||
}
|
||||
default:
|
||||
return MEMTX_ERROR;
|
||||
}
|
||||
}
|
||||
|
||||
static MemTxResult gicd_readw(GICv3State *s, hwaddr offset,
|
||||
uint64_t *data, MemTxAttrs attrs)
|
||||
{
|
||||
/* Only GICD_SETSPI_NSR, GICD_CLRSPI_NSR, GICD_SETSPI_SR and GICD_SETSPI_NSR
|
||||
* support 16 bit accesses, and those registers are all part of the
|
||||
* optional message-based SPI feature which this GIC does not currently
|
||||
* implement (ie for us GICD_TYPER.MBIS == 0), so for us they are
|
||||
* reserved.
|
||||
*/
|
||||
return MEMTX_ERROR;
|
||||
}
|
||||
|
||||
static MemTxResult gicd_writew(GICv3State *s, hwaddr offset,
|
||||
uint64_t value, MemTxAttrs attrs)
|
||||
{
|
||||
/* Only GICD_SETSPI_NSR, GICD_CLRSPI_NSR, GICD_SETSPI_SR and GICD_SETSPI_NSR
|
||||
* support 16 bit accesses, and those registers are all part of the
|
||||
* optional message-based SPI feature which this GIC does not currently
|
||||
* implement (ie for us GICD_TYPER.MBIS == 0), so for us they are
|
||||
* reserved.
|
||||
*/
|
||||
return MEMTX_ERROR;
|
||||
}
|
||||
|
||||
static MemTxResult gicd_readl(GICv3State *s, hwaddr offset,
|
||||
uint64_t *data, MemTxAttrs attrs)
|
||||
{
|
||||
/* Almost all GICv3 distributor registers are 32-bit.
|
||||
* Note that WO registers must return an UNKNOWN value on reads,
|
||||
* not an abort.
|
||||
*/
|
||||
|
||||
switch (offset) {
|
||||
case GICD_CTLR:
|
||||
if (!attrs.secure && !(s->gicd_ctlr & GICD_CTLR_DS)) {
|
||||
/* The NS view of the GICD_CTLR sees only certain bits:
|
||||
* + bit [31] (RWP) is an alias of the Secure bit [31]
|
||||
* + bit [4] (ARE_NS) is an alias of Secure bit [5]
|
||||
* + bit [1] (EnableGrp1A) is an alias of Secure bit [1] if
|
||||
* NS affinity routing is enabled, otherwise RES0
|
||||
* + bit [0] (EnableGrp1) is an alias of Secure bit [1] if
|
||||
* NS affinity routing is not enabled, otherwise RES0
|
||||
* Since for QEMU affinity routing is always enabled
|
||||
* for both S and NS this means that bits [4] and [5] are
|
||||
* both always 1, and we can simply make the NS view
|
||||
* be bits 31, 4 and 1 of the S view.
|
||||
*/
|
||||
*data = s->gicd_ctlr & (GICD_CTLR_ARE_S |
|
||||
GICD_CTLR_EN_GRP1NS |
|
||||
GICD_CTLR_RWP);
|
||||
} else {
|
||||
*data = s->gicd_ctlr;
|
||||
}
|
||||
return MEMTX_OK;
|
||||
case GICD_TYPER:
|
||||
{
|
||||
/* For this implementation:
|
||||
* No1N == 1 (1-of-N SPI interrupts not supported)
|
||||
* A3V == 1 (non-zero values of Affinity level 3 supported)
|
||||
* IDbits == 0xf (we support 16-bit interrupt identifiers)
|
||||
* DVIS == 0 (Direct virtual LPI injection not supported)
|
||||
* LPIS == 0 (LPIs not supported)
|
||||
* MBIS == 0 (message-based SPIs not supported)
|
||||
* SecurityExtn == 1 if security extns supported
|
||||
* CPUNumber == 0 since for us ARE is always 1
|
||||
* ITLinesNumber == (num external irqs / 32) - 1
|
||||
*/
|
||||
int itlinesnumber = ((s->num_irq - GIC_INTERNAL) / 32) - 1;
|
||||
|
||||
*data = (1 << 25) | (1 << 24) | (s->security_extn << 10) |
|
||||
(0xf << 19) | itlinesnumber;
|
||||
return MEMTX_OK;
|
||||
}
|
||||
case GICD_IIDR:
|
||||
/* We claim to be an ARM r0p0 with a zero ProductID.
|
||||
* This is the same as an r0p0 GIC-500.
|
||||
*/
|
||||
*data = gicv3_iidr();
|
||||
return MEMTX_OK;
|
||||
case GICD_STATUSR:
|
||||
/* RAZ/WI for us (this is an optional register and our implementation
|
||||
* does not track RO/WO/reserved violations to report them to the guest)
|
||||
*/
|
||||
*data = 0;
|
||||
return MEMTX_OK;
|
||||
case GICD_IGROUPR ... GICD_IGROUPR + 0x7f:
|
||||
{
|
||||
int irq;
|
||||
|
||||
if (!attrs.secure && !(s->gicd_ctlr & GICD_CTLR_DS)) {
|
||||
*data = 0;
|
||||
return MEMTX_OK;
|
||||
}
|
||||
/* RAZ/WI for SGIs, PPIs, unimplemented irqs */
|
||||
irq = (offset - GICD_IGROUPR) * 8;
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
*data = 0;
|
||||
return MEMTX_OK;
|
||||
}
|
||||
*data = *gic_bmp_ptr32(s->group, irq);
|
||||
return MEMTX_OK;
|
||||
}
|
||||
case GICD_ISENABLER ... GICD_ISENABLER + 0x7f:
|
||||
*data = gicd_read_bitmap_reg(s, attrs, s->enabled, NULL,
|
||||
offset - GICD_ISENABLER);
|
||||
return MEMTX_OK;
|
||||
case GICD_ICENABLER ... GICD_ICENABLER + 0x7f:
|
||||
*data = gicd_read_bitmap_reg(s, attrs, s->enabled, NULL,
|
||||
offset - GICD_ICENABLER);
|
||||
return MEMTX_OK;
|
||||
case GICD_ISPENDR ... GICD_ISPENDR + 0x7f:
|
||||
*data = gicd_read_bitmap_reg(s, attrs, s->pending, mask_nsacr_ge1,
|
||||
offset - GICD_ISPENDR);
|
||||
return MEMTX_OK;
|
||||
case GICD_ICPENDR ... GICD_ICPENDR + 0x7f:
|
||||
*data = gicd_read_bitmap_reg(s, attrs, s->pending, mask_nsacr_ge2,
|
||||
offset - GICD_ICPENDR);
|
||||
return MEMTX_OK;
|
||||
case GICD_ISACTIVER ... GICD_ISACTIVER + 0x7f:
|
||||
*data = gicd_read_bitmap_reg(s, attrs, s->active, mask_nsacr_ge2,
|
||||
offset - GICD_ISACTIVER);
|
||||
return MEMTX_OK;
|
||||
case GICD_ICACTIVER ... GICD_ICACTIVER + 0x7f:
|
||||
*data = gicd_read_bitmap_reg(s, attrs, s->active, mask_nsacr_ge2,
|
||||
offset - GICD_ICACTIVER);
|
||||
return MEMTX_OK;
|
||||
case GICD_IPRIORITYR ... GICD_IPRIORITYR + 0x3ff:
|
||||
{
|
||||
int i, irq = offset - GICD_IPRIORITYR;
|
||||
uint32_t value = 0;
|
||||
|
||||
for (i = irq + 3; i >= irq; i--, value <<= 8) {
|
||||
value |= gicd_read_ipriorityr(s, attrs, i);
|
||||
}
|
||||
*data = value;
|
||||
return MEMTX_OK;
|
||||
}
|
||||
case GICD_ITARGETSR ... GICD_ITARGETSR + 0x3ff:
|
||||
/* RAZ/WI since affinity routing is always enabled */
|
||||
*data = 0;
|
||||
return MEMTX_OK;
|
||||
case GICD_ICFGR ... GICD_ICFGR + 0xff:
|
||||
{
|
||||
/* Here only the even bits are used; odd bits are RES0 */
|
||||
int irq = (offset - GICD_ICFGR) * 4;
|
||||
uint32_t value = 0;
|
||||
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
*data = 0;
|
||||
return MEMTX_OK;
|
||||
}
|
||||
|
||||
/* Since our edge_trigger bitmap is one bit per irq, we only need
|
||||
* half of the 32-bit word, which we can then spread out
|
||||
* into the odd bits.
|
||||
*/
|
||||
value = *gic_bmp_ptr32(s->edge_trigger, irq & ~0x1f);
|
||||
value &= mask_group_and_nsacr(s, attrs, NULL, irq & ~0x1f);
|
||||
value = extract32(value, (irq & 0x1f) ? 16 : 0, 16);
|
||||
value = half_shuffle32(value) << 1;
|
||||
*data = value;
|
||||
return MEMTX_OK;
|
||||
}
|
||||
case GICD_IGRPMODR ... GICD_IGRPMODR + 0xff:
|
||||
{
|
||||
int irq;
|
||||
|
||||
if ((s->gicd_ctlr & GICD_CTLR_DS) || !attrs.secure) {
|
||||
/* RAZ/WI if security disabled, or if
|
||||
* security enabled and this is an NS access
|
||||
*/
|
||||
*data = 0;
|
||||
return MEMTX_OK;
|
||||
}
|
||||
/* RAZ/WI for SGIs, PPIs, unimplemented irqs */
|
||||
irq = (offset - GICD_IGRPMODR) * 8;
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
*data = 0;
|
||||
return MEMTX_OK;
|
||||
}
|
||||
*data = *gic_bmp_ptr32(s->grpmod, irq);
|
||||
return MEMTX_OK;
|
||||
}
|
||||
case GICD_NSACR ... GICD_NSACR + 0xff:
|
||||
{
|
||||
/* Two bits per interrupt */
|
||||
int irq = (offset - GICD_NSACR) * 4;
|
||||
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
*data = 0;
|
||||
return MEMTX_OK;
|
||||
}
|
||||
|
||||
if ((s->gicd_ctlr & GICD_CTLR_DS) || !attrs.secure) {
|
||||
/* RAZ/WI if security disabled, or if
|
||||
* security enabled and this is an NS access
|
||||
*/
|
||||
*data = 0;
|
||||
return MEMTX_OK;
|
||||
}
|
||||
|
||||
*data = s->gicd_nsacr[irq / 16];
|
||||
return MEMTX_OK;
|
||||
}
|
||||
case GICD_CPENDSGIR ... GICD_CPENDSGIR + 0xf:
|
||||
case GICD_SPENDSGIR ... GICD_SPENDSGIR + 0xf:
|
||||
/* RAZ/WI since affinity routing is always enabled */
|
||||
*data = 0;
|
||||
return MEMTX_OK;
|
||||
case GICD_IROUTER ... GICD_IROUTER + 0x1fdf:
|
||||
{
|
||||
uint64_t r;
|
||||
int irq = (offset - GICD_IROUTER) / 8;
|
||||
|
||||
r = gicd_read_irouter(s, attrs, irq);
|
||||
if (offset & 7) {
|
||||
*data = r >> 32;
|
||||
} else {
|
||||
*data = (uint32_t)r;
|
||||
}
|
||||
return MEMTX_OK;
|
||||
}
|
||||
case GICD_IDREGS ... GICD_IDREGS + 0x1f:
|
||||
/* ID registers */
|
||||
*data = gicv3_idreg(offset - GICD_IDREGS);
|
||||
return MEMTX_OK;
|
||||
case GICD_SGIR:
|
||||
/* WO registers, return unknown value */
|
||||
qemu_log_mask(LOG_GUEST_ERROR,
|
||||
"%s: invalid guest read from WO register at offset "
|
||||
TARGET_FMT_plx "\n", __func__, offset);
|
||||
*data = 0;
|
||||
return MEMTX_OK;
|
||||
default:
|
||||
return MEMTX_ERROR;
|
||||
}
|
||||
}
|
||||
|
||||
static MemTxResult gicd_writel(GICv3State *s, hwaddr offset,
|
||||
uint64_t value, MemTxAttrs attrs)
|
||||
{
|
||||
/* Almost all GICv3 distributor registers are 32-bit. Note that
|
||||
* RO registers must ignore writes, not abort.
|
||||
*/
|
||||
|
||||
switch (offset) {
|
||||
case GICD_CTLR:
|
||||
{
|
||||
uint32_t mask;
|
||||
/* GICv3 5.3.20 */
|
||||
if (s->gicd_ctlr & GICD_CTLR_DS) {
|
||||
/* With only one security state, E1NWF is RAZ/WI, DS is RAO/WI,
|
||||
* ARE is RAO/WI (affinity routing always on), and only
|
||||
* bits 0 and 1 (group enables) are writable.
|
||||
*/
|
||||
mask = GICD_CTLR_EN_GRP0 | GICD_CTLR_EN_GRP1NS;
|
||||
} else {
|
||||
if (attrs.secure) {
|
||||
/* for secure access:
|
||||
* ARE_NS and ARE_S are RAO/WI (affinity routing always on)
|
||||
* E1NWF is RAZ/WI (we don't support enable-1-of-n-wakeup)
|
||||
*
|
||||
* We can only modify bits[2:0] (the group enables).
|
||||
*/
|
||||
mask = GICD_CTLR_DS | GICD_CTLR_EN_GRP0 | GICD_CTLR_EN_GRP1_ALL;
|
||||
} else {
|
||||
/* For non secure access ARE_NS is RAO/WI and EnableGrp1
|
||||
* is RES0. The only writable bit is [1] (EnableGrp1A), which
|
||||
* is an alias of the Secure bit [1].
|
||||
*/
|
||||
mask = GICD_CTLR_EN_GRP1NS;
|
||||
}
|
||||
}
|
||||
s->gicd_ctlr = (s->gicd_ctlr & ~mask) | (value & mask);
|
||||
if (value & mask & GICD_CTLR_DS) {
|
||||
/* We just set DS, so the ARE_NS and EnG1S bits are now RES0.
|
||||
* Note that this is a one-way transition because if DS is set
|
||||
* then it's not writeable, so it can only go back to 0 with a
|
||||
* hardware reset.
|
||||
*/
|
||||
s->gicd_ctlr &= ~(GICD_CTLR_EN_GRP1S | GICD_CTLR_ARE_NS);
|
||||
}
|
||||
gicv3_full_update(s);
|
||||
return MEMTX_OK;
|
||||
}
|
||||
case GICD_STATUSR:
|
||||
/* RAZ/WI for our implementation */
|
||||
return MEMTX_OK;
|
||||
case GICD_IGROUPR ... GICD_IGROUPR + 0x7f:
|
||||
{
|
||||
int irq;
|
||||
|
||||
if (!attrs.secure && !(s->gicd_ctlr & GICD_CTLR_DS)) {
|
||||
return MEMTX_OK;
|
||||
}
|
||||
/* RAZ/WI for SGIs, PPIs, unimplemented irqs */
|
||||
irq = (offset - GICD_IGROUPR) * 8;
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
return MEMTX_OK;
|
||||
}
|
||||
*gic_bmp_ptr32(s->group, irq) = value;
|
||||
gicv3_update(s, irq, 32);
|
||||
return MEMTX_OK;
|
||||
}
|
||||
case GICD_ISENABLER ... GICD_ISENABLER + 0x7f:
|
||||
gicd_write_set_bitmap_reg(s, attrs, s->enabled, NULL,
|
||||
offset - GICD_ISENABLER, value);
|
||||
return MEMTX_OK;
|
||||
case GICD_ICENABLER ... GICD_ICENABLER + 0x7f:
|
||||
gicd_write_clear_bitmap_reg(s, attrs, s->enabled, NULL,
|
||||
offset - GICD_ICENABLER, value);
|
||||
return MEMTX_OK;
|
||||
case GICD_ISPENDR ... GICD_ISPENDR + 0x7f:
|
||||
gicd_write_set_bitmap_reg(s, attrs, s->pending, mask_nsacr_ge1,
|
||||
offset - GICD_ISPENDR, value);
|
||||
return MEMTX_OK;
|
||||
case GICD_ICPENDR ... GICD_ICPENDR + 0x7f:
|
||||
gicd_write_clear_bitmap_reg(s, attrs, s->pending, mask_nsacr_ge2,
|
||||
offset - GICD_ICPENDR, value);
|
||||
return MEMTX_OK;
|
||||
case GICD_ISACTIVER ... GICD_ISACTIVER + 0x7f:
|
||||
gicd_write_set_bitmap_reg(s, attrs, s->active, NULL,
|
||||
offset - GICD_ISACTIVER, value);
|
||||
return MEMTX_OK;
|
||||
case GICD_ICACTIVER ... GICD_ICACTIVER + 0x7f:
|
||||
gicd_write_clear_bitmap_reg(s, attrs, s->active, NULL,
|
||||
offset - GICD_ICACTIVER, value);
|
||||
return MEMTX_OK;
|
||||
case GICD_IPRIORITYR ... GICD_IPRIORITYR + 0x3ff:
|
||||
{
|
||||
int i, irq = offset - GICD_IPRIORITYR;
|
||||
|
||||
if (irq < GIC_INTERNAL || irq + 3 >= s->num_irq) {
|
||||
return MEMTX_OK;
|
||||
}
|
||||
|
||||
for (i = irq; i < irq + 4; i++, value >>= 8) {
|
||||
gicd_write_ipriorityr(s, attrs, i, value);
|
||||
}
|
||||
gicv3_update(s, irq, 4);
|
||||
return MEMTX_OK;
|
||||
}
|
||||
case GICD_ITARGETSR ... GICD_ITARGETSR + 0x3ff:
|
||||
/* RAZ/WI since affinity routing is always enabled */
|
||||
return MEMTX_OK;
|
||||
case GICD_ICFGR ... GICD_ICFGR + 0xff:
|
||||
{
|
||||
/* Here only the odd bits are used; even bits are RES0 */
|
||||
int irq = (offset - GICD_ICFGR) * 4;
|
||||
uint32_t mask, oldval;
|
||||
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
return MEMTX_OK;
|
||||
}
|
||||
|
||||
/* Since our edge_trigger bitmap is one bit per irq, our input
|
||||
* 32-bits will compress down into 16 bits which we need
|
||||
* to write into the bitmap.
|
||||
*/
|
||||
value = half_unshuffle32(value >> 1);
|
||||
mask = mask_group_and_nsacr(s, attrs, NULL, irq & ~0x1f);
|
||||
if (irq & 0x1f) {
|
||||
value <<= 16;
|
||||
mask &= 0xffff0000U;
|
||||
} else {
|
||||
mask &= 0xffff;
|
||||
}
|
||||
oldval = *gic_bmp_ptr32(s->edge_trigger, (irq & ~0x1f));
|
||||
value = (oldval & ~mask) | (value & mask);
|
||||
*gic_bmp_ptr32(s->edge_trigger, irq & ~0x1f) = value;
|
||||
return MEMTX_OK;
|
||||
}
|
||||
case GICD_IGRPMODR ... GICD_IGRPMODR + 0xff:
|
||||
{
|
||||
int irq;
|
||||
|
||||
if ((s->gicd_ctlr & GICD_CTLR_DS) || !attrs.secure) {
|
||||
/* RAZ/WI if security disabled, or if
|
||||
* security enabled and this is an NS access
|
||||
*/
|
||||
return MEMTX_OK;
|
||||
}
|
||||
/* RAZ/WI for SGIs, PPIs, unimplemented irqs */
|
||||
irq = (offset - GICD_IGRPMODR) * 8;
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
return MEMTX_OK;
|
||||
}
|
||||
*gic_bmp_ptr32(s->grpmod, irq) = value;
|
||||
gicv3_update(s, irq, 32);
|
||||
return MEMTX_OK;
|
||||
}
|
||||
case GICD_NSACR ... GICD_NSACR + 0xff:
|
||||
{
|
||||
/* Two bits per interrupt */
|
||||
int irq = (offset - GICD_NSACR) * 4;
|
||||
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
return MEMTX_OK;
|
||||
}
|
||||
|
||||
if ((s->gicd_ctlr & GICD_CTLR_DS) || !attrs.secure) {
|
||||
/* RAZ/WI if security disabled, or if
|
||||
* security enabled and this is an NS access
|
||||
*/
|
||||
return MEMTX_OK;
|
||||
}
|
||||
|
||||
s->gicd_nsacr[irq / 16] = value;
|
||||
/* No update required as this only affects access permission checks */
|
||||
return MEMTX_OK;
|
||||
}
|
||||
case GICD_SGIR:
|
||||
/* RES0 if affinity routing is enabled */
|
||||
return MEMTX_OK;
|
||||
case GICD_CPENDSGIR ... GICD_CPENDSGIR + 0xf:
|
||||
case GICD_SPENDSGIR ... GICD_SPENDSGIR + 0xf:
|
||||
/* RAZ/WI since affinity routing is always enabled */
|
||||
return MEMTX_OK;
|
||||
case GICD_IROUTER ... GICD_IROUTER + 0x1fdf:
|
||||
{
|
||||
uint64_t r;
|
||||
int irq = (offset - GICD_IROUTER) / 8;
|
||||
|
||||
if (irq < GIC_INTERNAL || irq >= s->num_irq) {
|
||||
return MEMTX_OK;
|
||||
}
|
||||
|
||||
/* Write half of the 64-bit register */
|
||||
r = gicd_read_irouter(s, attrs, irq);
|
||||
r = deposit64(r, (offset & 7) ? 32 : 0, 32, value);
|
||||
gicd_write_irouter(s, attrs, irq, r);
|
||||
return MEMTX_OK;
|
||||
}
|
||||
case GICD_IDREGS ... GICD_IDREGS + 0x1f:
|
||||
case GICD_TYPER:
|
||||
case GICD_IIDR:
|
||||
/* RO registers, ignore the write */
|
||||
qemu_log_mask(LOG_GUEST_ERROR,
|
||||
"%s: invalid guest write to RO register at offset "
|
||||
TARGET_FMT_plx "\n", __func__, offset);
|
||||
return MEMTX_OK;
|
||||
default:
|
||||
return MEMTX_ERROR;
|
||||
}
|
||||
}
|
||||
|
||||
static MemTxResult gicd_writell(GICv3State *s, hwaddr offset,
|
||||
uint64_t value, MemTxAttrs attrs)
|
||||
{
|
||||
/* Our only 64-bit registers are GICD_IROUTER<n> */
|
||||
int irq;
|
||||
|
||||
switch (offset) {
|
||||
case GICD_IROUTER ... GICD_IROUTER + 0x1fdf:
|
||||
irq = (offset - GICD_IROUTER) / 8;
|
||||
gicd_write_irouter(s, attrs, irq, value);
|
||||
return MEMTX_OK;
|
||||
default:
|
||||
return MEMTX_ERROR;
|
||||
}
|
||||
}
|
||||
|
||||
static MemTxResult gicd_readll(GICv3State *s, hwaddr offset,
|
||||
uint64_t *data, MemTxAttrs attrs)
|
||||
{
|
||||
/* Our only 64-bit registers are GICD_IROUTER<n> */
|
||||
int irq;
|
||||
|
||||
switch (offset) {
|
||||
case GICD_IROUTER ... GICD_IROUTER + 0x1fdf:
|
||||
irq = (offset - GICD_IROUTER) / 8;
|
||||
*data = gicd_read_irouter(s, attrs, irq);
|
||||
return MEMTX_OK;
|
||||
default:
|
||||
return MEMTX_ERROR;
|
||||
}
|
||||
}
|
||||
|
||||
MemTxResult gicv3_dist_read(void *opaque, hwaddr offset, uint64_t *data,
|
||||
unsigned size, MemTxAttrs attrs)
|
||||
{
|
||||
GICv3State *s = (GICv3State *)opaque;
|
||||
MemTxResult r;
|
||||
|
||||
switch (size) {
|
||||
case 1:
|
||||
r = gicd_readb(s, offset, data, attrs);
|
||||
break;
|
||||
case 2:
|
||||
r = gicd_readw(s, offset, data, attrs);
|
||||
break;
|
||||
case 4:
|
||||
r = gicd_readl(s, offset, data, attrs);
|
||||
break;
|
||||
case 8:
|
||||
r = gicd_readll(s, offset, data, attrs);
|
||||
break;
|
||||
default:
|
||||
r = MEMTX_ERROR;
|
||||
break;
|
||||
}
|
||||
|
||||
if (r == MEMTX_ERROR) {
|
||||
qemu_log_mask(LOG_GUEST_ERROR,
|
||||
"%s: invalid guest read at offset " TARGET_FMT_plx
|
||||
"size %u\n", __func__, offset, size);
|
||||
trace_gicv3_dist_badread(offset, size, attrs.secure);
|
||||
} else {
|
||||
trace_gicv3_dist_read(offset, *data, size, attrs.secure);
|
||||
}
|
||||
return r;
|
||||
}
|
||||
|
||||
MemTxResult gicv3_dist_write(void *opaque, hwaddr offset, uint64_t data,
|
||||
unsigned size, MemTxAttrs attrs)
|
||||
{
|
||||
GICv3State *s = (GICv3State *)opaque;
|
||||
MemTxResult r;
|
||||
|
||||
switch (size) {
|
||||
case 1:
|
||||
r = gicd_writeb(s, offset, data, attrs);
|
||||
break;
|
||||
case 2:
|
||||
r = gicd_writew(s, offset, data, attrs);
|
||||
break;
|
||||
case 4:
|
||||
r = gicd_writel(s, offset, data, attrs);
|
||||
break;
|
||||
case 8:
|
||||
r = gicd_writell(s, offset, data, attrs);
|
||||
break;
|
||||
default:
|
||||
r = MEMTX_ERROR;
|
||||
break;
|
||||
}
|
||||
|
||||
if (r == MEMTX_ERROR) {
|
||||
qemu_log_mask(LOG_GUEST_ERROR,
|
||||
"%s: invalid guest write at offset " TARGET_FMT_plx
|
||||
"size %u\n", __func__, offset, size);
|
||||
trace_gicv3_dist_badwrite(offset, data, size, attrs.secure);
|
||||
} else {
|
||||
trace_gicv3_dist_write(offset, data, size, attrs.secure);
|
||||
}
|
||||
return r;
|
||||
}
|
||||
@ -201,6 +201,10 @@ void gicv3_full_update_noirqset(GICv3State *s);
|
||||
* and inform the CPUs accordingly.
|
||||
*/
|
||||
void gicv3_full_update(GICv3State *s);
|
||||
MemTxResult gicv3_dist_read(void *opaque, hwaddr offset, uint64_t *data,
|
||||
unsigned size, MemTxAttrs attrs);
|
||||
MemTxResult gicv3_dist_write(void *opaque, hwaddr addr, uint64_t data,
|
||||
unsigned size, MemTxAttrs attrs);
|
||||
|
||||
/**
|
||||
* gicv3_cpuif_update:
|
||||
|
||||
@ -2165,3 +2165,9 @@ e1000e_cfg_support_virtio(bool support) "Virtio header supported: %d"
|
||||
|
||||
e1000e_vm_state_running(void) "VM state is running"
|
||||
e1000e_vm_state_stopped(void) "VM state is stopped"
|
||||
|
||||
# hw/intc/arm_gicv3_dist.c
|
||||
gicv3_dist_read(uint64_t offset, uint64_t data, unsigned size, bool secure) "GICv3 distributor read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u secure %d"
|
||||
gicv3_dist_badread(uint64_t offset, unsigned size, bool secure) "GICv3 distributor read: offset 0x%" PRIx64 " size %u secure %d: error"
|
||||
gicv3_dist_write(uint64_t offset, uint64_t data, unsigned size, bool secure) "GICv3 distributor write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u secure %d"
|
||||
gicv3_dist_badwrite(uint64_t offset, uint64_t data, unsigned size, bool secure) "GICv3 distributor write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u secure %d: error"
|
||||
|
||||
Loading…
Reference in New Issue
Block a user