Since commit f1018ea0a3 ("tests: avoid DOS line endings in PSK file"),
the bug of the helper test_tls_psk_init_common() that caused TLS PSK
tests to fail on Windows was fixed. Let's enable these tests on win32.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221101035021.729669-1-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221105115525.623059-1-sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There were still some constants defined in e1000_regs.h.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221105053010.38037-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Nemonics E1000_STATUS_LAN_INIT_DONE and E1000_STATUS_ASDV_1000 have
the same value, and E1000_STATUS_ASDV_1000 should be used here because
E1000_STATUS_ASDV_1000 represents the auto-detected speed tested here
while E1000_STATUS_LAN_INIT_DONE is a value used for a different purpose
with a variant of e1000e family different from the one implemented in
QEMU.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103083425.100590-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The register definitions in tests/qtest/e1000e-test.c had names
different from hw/net/e1000_regs.h, which made it hard to understand
what test codes corresponds to the implementation. Use
hw/net/e1000_regs.h from tests/qtest/libqos/e1000e.c to remove
these duplications.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103095416.110162-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The later device status check depends on E1000_STATUS_LU, which is
enabled by E1000_CTRL_SLU. Though E1000_STATUS_LU is not implemented
and E1000_STATUS_LU is always available in the current implementation,
be a bit nicer and set E1000_CTRL_SLU just in case the bit is
implemented in the future.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103025451.27446-1-akihiko.odaki@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This is yet another minor cleanup to ease understanding and
future refactoring of the tests.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103015017.19947-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Fix regression booting Trusted Firmware
* Honor HCR_E2H and HCR_TGE in ats_write64()
* Copy the entire vector in DO_ZIP
* Fix Privileged Access Never (PAN) for aarch32
* Make TLBIOS and TLBIRANGE ops trap on HCR_EL2.TTLB
* Set SCR_EL3.HXEn when direct booting kernel
* Set SME and SVE EL3 vector lengths when direct booting kernel
-----BEGIN PGP SIGNATURE-----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=Fcb4
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20221104' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Fix regression booting Trusted Firmware
* Honor HCR_E2H and HCR_TGE in ats_write64()
* Copy the entire vector in DO_ZIP
* Fix Privileged Access Never (PAN) for aarch32
* Make TLBIOS and TLBIRANGE ops trap on HCR_EL2.TTLB
* Set SCR_EL3.HXEn when direct booting kernel
* Set SME and SVE EL3 vector lengths when direct booting kernel
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmNk+KkZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vUsD/9SYZP3ne2OZxBe8he98jJ5
# 6apODiBksBLUM+1bKEoYW8Kw4XpS10I1Tbnxe7n0bNAfIiZlsZ7HJAJaYWy4MX4k
# Bq0v1EIFo+Obumocc14ZzWcw9yPpHOGavKHXfPxTtIw0amtOmh3aMBPuOZKiMSaq
# TdI/8654DbAOY3Hp/r6WnXwEgAc23kx/PtGhQFdU4iWhzTdeQeFkgCCsVMO02zFQ
# ZM4wiAATpfNfgf5+Wxoin6RQ8nI9PF+Xf7HhN3d1CiXju3vOl+geYNkubJzIopv1
# itLcnvduYE6+5oJsnXZ4FDNO6/nnqWRNqtyDf0/NjLROfj84BPJpZqMX+FR6Q0I0
# d+4/oEw4A46qfaS5b4/YelbJOiUgiViWU1Xs3g2dkeTMT8CyGfDrJ2HRDKN7AaHo
# llL7s1calkX2oSs+gU0BAw8xRETGwMBSOpF6JmPVh277LjvWfN1vsJzVUG3wrSXL
# G7qa2h+fHV5Xu876sc/i0+d4qHuqcE/EU86VQ6X40f+dRzN02rkSCPAxzGFwLXOr
# 8fl5MsX6z5pqcubnzxkhi66ZHc6fXsvtUjKBxyrVpMyjMlV9PTJ2Q1RCgVctErXk
# lDzsLuplzPSjZBy3Peib/rLnmYUxJHyPe0RFYIumzZv/UHwL4GjZgkI842UVBpAL
# FvIGblcCXHhdP4UFvqgZhw==
# =Fcb4
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 04 Nov 2022 07:34:01 EDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20221104' of https://git.linaro.org/people/pmaydell/qemu-arm:
target/arm: Two fixes for secure ptw
target/arm: Honor HCR_E2H and HCR_TGE in ats_write64()
target/arm: Copy the entire vector in DO_ZIP
target/arm: Fix Privileged Access Never (PAN) for aarch32
target/arm: Make TLBIOS and TLBIRANGE ops trap on HCR_EL2.TTLB
hw/arm/boot: Set SCR_EL3.HXEn when booting kernel
hw/arm/boot: Set SME and SVE EL3 vector lengths when booting kernel
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reversed the sense of non-secure in get_phys_addr_lpae,
and failed to initialize attrs.secure for ARMMMUIdx_Phys_S.
Fixes: 48da29e4 ("target/arm: Add ptw_idx to S1Translate")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1293
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to check HCR_E2H and HCR_TGE to select the right MMU index for
the correct translation regime.
To check for EL2&0 translation regime:
- For S1E0*, S1E1* and S12E* ops, check both HCR_E2H and HCR_TGE
- For S1E2* ops, check only HCR_E2H
Signed-off-by: Ake Koomsin <ake@igel.co.jp>
Message-id: 20221101064250.12444-1-ake@igel.co.jp
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With odd_ofs set, we weren't copying enough data.
Fixes: 09eb6d7025 ("target/arm: Move sve zip high_ofs into simd_data")
Reported-by: Idan Horowitz <idan.horowitz@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221031054144.3574-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we implemented the PAN support we theoretically wanted
to support it for both AArch32 and AArch64, but in practice
several bugs made it essentially unusable with an AArch32
guest. Fix all those problems:
- Use CPSR.PAN to check for PAN state in aarch32 mode
- throw permission fault during address translation when PAN is
enabled and kernel tries to access user acessible page
- ignore SCTLR_XP bit for armv7 and armv8 (conflicts with SCTLR_SPAN).
Signed-off-by: Timofey Kutergin <tkutergin@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221027112619.2205229-1-tkutergin@gmail.com
[PMM: tweak commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The HCR_EL2.TTLB bit is supposed to trap all EL1 execution of TLB
maintenance instructions. However we have added new TLB insns for
FEAT_TLBIOS and FEAT_TLBIRANGE, and forgot to set their accessfn to
access_ttlb. Add the missing accessfns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When we direct boot a kernel on a CPU which emulates EL3, we need to
set up the EL3 system registers as the Linux kernel documentation
specifies:
https://www.kernel.org/doc/Documentation/arm64/booting.rst
For CPUs with FEAT_HCX support this includes:
- SCR_EL3.HXEn (bit 38) must be initialised to 0b1.
but we forgot to do this when implementing FEAT_HCX, which would mean
that a guest trying to access the HCRX_EL2 register would crash.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221027140207.413084-3-peter.maydell@linaro.org
When we direct boot a kernel on a CPU which emulates EL3, we need
to set up the EL3 system registers as the Linux kernel documentation
specifies:
https://www.kernel.org/doc/Documentation/arm64/booting.rst
For SVE and SME this includes:
- ZCR_EL3.LEN must be initialised to the same value for all CPUs the
kernel is executed on.
- SMCR_EL3.LEN must be initialised to the same value for all CPUs the
kernel will execute on.
Although we are technically compliant with this, the "same value" we
currently use by default is the reset value of 0. This will end up
forcing the guest kernel's SVE and SME vector length to be only the
smallest supported length.
Initialize the vector length fields to their maximum possible value,
which is 0xf. If the implementation doesn't actually support that
vector length then the effective vector length will be constrained
down to the maximum supported value at point of use.
This allows the guest to use all the vector lengths the emulated CPU
supports (by programming the _EL2 and _EL1 versions of these
registers.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221027140207.413084-2-peter.maydell@linaro.org
We need to emulate it to generate a floating point disable exception
when CSR.EUEN.FPE is zero.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Message-Id: <20221104040517.222059-3-wangrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Message-Id: <20221104040517.222059-2-wangrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
When the address is invalid address, We should set exception_index
according to MMUAccessType, and EXCCODE_ADEF need't update badinstr.
Otherwise, The system enters an infinite loop. e.g:
run test.c on system mode
test.c:
#include<stdio.h>
void (*func)(int *);
int main()
{
int i = 8;
void *ptr = (void *)0x4000000000000000;
func = ptr;
func(&i);
return 0;
}
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20221101073210.3934280-2-gaosong@loongson.cn>
We need subcodes to distinguish the same excode cs->exception_indexs,
such as EXCCODE_ADEF/EXCCODE_ADEM.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20221101073210.3934280-1-gaosong@loongson.cn>
Add TPM device for LoongArch virt machine, including
establish TPM acpi info and add TYPE_TPM_TIS_SYSBUS
to dynamic_sysbus_devices list.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221028014007.2718352-4-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add new items into LoongArch FDT, including rtc and uart info.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221028014007.2718352-3-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Load FDT table into dram memory space, and the addr is 2 MiB.
Since lowmem region starts from 0, FDT base address is located
at 2 MiB to avoid NULL pointer access.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221028014007.2718352-2-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
1. When cpu read or write extioi COREISR reg, it should access
the reg belonged to itself, so the cpu index of 's->coreisr'
is current cpu number. Using MemTxAttrs' requester_id to get
the cpu index.
2. it need not to mask 0x1f when calculate the coreisr array index.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221021015307.2570844-3-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Converting the MemoryRegionOps read/write handlers to
with_attrs in LoongArch extioi emulation.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221021015307.2570844-2-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
It's possible that a message contains both normal payload and ancillary
data in the same message, and even if no ancillary data is available
this information should be passed to the target, otherwise the target
cmsghdr will be left uninitialized and the target is going to access
uninitialized memory if it expects cmsg.
Always call the function that translate cmsg when recvmsg, because that
function should be empty-cmsg-safe (it creates an empty cmsg in the
target).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221028081220.1604244-1-uwu@icenowy.me>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The glibc on the hppa platform uses the "iitlbp %r0,(%sr0, %r0)"
assembler instruction as ABORT_INSTRUCTION.
If this (in userspace context) illegal assembler statement is found,
dump the registers and report the failure to userspace the same way as
the Linux kernel on physical hardware.
For other illegal instructions report TARGET_ILL_ILLOPC instead of
TARGET_ILL_ILLOPN as si_code.
Additionally add the missing EXCP_BREAK exception handler which occurs
when the "break x,y" assembler instruction is executed and report
EXCP_ASSIST traps.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <Y1osHVsylkuZNUnY@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If CR0.PG is unset, pg_mode will be zero, but it will also be zero
for non-PAE/non-PSE page tables with CR0.WP=0. Restore the
correct test for paging enabled.
Fixes: 98281984a3 ("target/i386: Add MMU_PHYS_IDX and MMU_NESTED_IDX")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1269
Reported-by: Andreas Gustafsson <gson@gson.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221102091232.1092552-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As per the NVMe Command Set specification Section 3.2.2, if
i) The namespace is formatted to use 16b Guard Protection
Information (i.e., pif = 0) and
ii) The Descriptor Format is not cleared to 0h
Then the copy command should be aborted with the status code of Invalid
Namespace or Format
Fixes: 44219b6029 ("hw/nvme: 64-bit pi support")
Signed-off-by: Francis Pravin Antony Michael Raj <francis.michael@solidigm.com>
Signed-off-by: Jonathan Derrick <jonathan.derrick@solidigm.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Commit 2e53b0b450 ("hw/nvme: Use ioeventfd to handle doorbell
updates") had the unintended effect of disabling batching of CQEs.
This patch changes the sq/cq timers to bottom halfs and instead of
calling nvme_post_cqes() immediately (causing an interrupt per cqe), we
defer the call.
| iops
-----------------+------
baseline | 138k
+cqe batching | 233k
Fixes: 2e53b0b450 ("hw/nvme: Use ioeventfd to handle doorbell updates")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jinhao Fan <fanjinhao21s@ict.ac.cn>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Note that we're still discussing "block/blkio: Make driver nvme-io_uring take a
"path" instead of a "filename"". I have sent the pull request now so everything
is ready for the soft freeze tomorrow if we decide to go ahead with the patch.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmNgGQkACgkQnKSrs4Gr
c8hLFgf/dnszoHO02hjoJCN2LPAxDalyYKzog+ZU8U5VdzJn2gione1jVlf3Xb0l
mhTgrioSbKLKXavGZTSwWUki/xRgCJMtG3m07EFmMsLX0QiSOIyzLr0DslQawYdZ
FlXyCCyAVTUILz7oUXBqORlfTKsGPHms6nlXQYhitTOsDbPyqbT9nNPKAlfGkqfj
Pwn+oWJmjLC0aARpcrB1bXCMbqQrtZGh4bBgfIXRUJmprWqk227bkFvXNCuXU16x
PC4oH552+6nyQyRxGpHc3o1W/8gqlxU9DTBb5arDUQaDvsDTKVkuGe2HdDI7knAT
/m57/BFVUnA35SYOxX+0piiEbawI6Q==
=UWL7
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
Note that we're still discussing "block/blkio: Make driver nvme-io_uring take a
"path" instead of a "filename"". I have sent the pull request now so everything
is ready for the soft freeze tomorrow if we decide to go ahead with the patch.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmNgGQkACgkQnKSrs4Gr
# c8hLFgf/dnszoHO02hjoJCN2LPAxDalyYKzog+ZU8U5VdzJn2gione1jVlf3Xb0l
# mhTgrioSbKLKXavGZTSwWUki/xRgCJMtG3m07EFmMsLX0QiSOIyzLr0DslQawYdZ
# FlXyCCyAVTUILz7oUXBqORlfTKsGPHms6nlXQYhitTOsDbPyqbT9nNPKAlfGkqfj
# Pwn+oWJmjLC0aARpcrB1bXCMbqQrtZGh4bBgfIXRUJmprWqk227bkFvXNCuXU16x
# PC4oH552+6nyQyRxGpHc3o1W/8gqlxU9DTBb5arDUQaDvsDTKVkuGe2HdDI7knAT
# /m57/BFVUnA35SYOxX+0piiEbawI6Q==
# =UWL7
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 31 Oct 2022 14:50:49 EDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [ultimate]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [ultimate]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
block/blkio: Make driver nvme-io_uring take a "path" instead of a "filename"
block/blkio: Tolerate device size changes
block/blkio: Add virtio-blk-vfio-pci BlockDriver
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- cleanup win32/64 docker files
- update test-mingw test
- add flex/bison to debian-all-test
- handle --enable-static/--disable-pie in config
- extend timeouts on x86_64 avocado tests
- add flex/bison to debian-hexagon-cross
- use regular semihosting for nios2 check-tcg
- fix obscure linker error to nios2 softmmu tests
- various windows portability fixes for tests
- clean-up of MAINTAINERS
- use -machine none when appropriate in avocado
- make raspi2_initrd test detect shutdown
- disable sh4 rd2 tests on gitlab
- re-enable threadcount/linux-test for sh4
- clean-up s390x handling of "ex" instruction
- better handle new CPUs in execlog plugin
- pass CONFIG_DEBUG_TCG to plugin builds
- try and avoid races in test-io-channel-command
- speed up ssh key checking for tests/vm
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmNhI/MACgkQ+9DbCVqe
KkSFXggAg0HIpBDcNz0V5Mh5p69F14pwbDSygKqGDFBebdOHeL7f+WCvQPUGEWxp
814zjvRY3SC4Mo4mtzguRvNu0styaUpemvRw5FDYK48GpEjg2eVxTnAFD4nr7ud0
dhw3iaHP+RjA6s3EpPUqQ5nlZEgFJ+Tvkckk3wKSpksBYA4tJra6Uey5kpZ27x0T
KOzB2P6w+9B/B11n/aeSxvRPZdnXt2MyfS/3pwwfoFYioEyaEQ3Ie6ooachtdSL3
PEvnJVK0VVYbZQwBXJlycNLlK/D++s4AEwmnZ5GmvDFuXlkRO9YMy9Wa5TKJl7gz
76Aw1KHsE03SyAPvH4bE7eGkIwhJOQ==
=6hXE
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-for-7.2-011122-3' of https://github.com/stsquad/qemu into staging
testing and plugin updates for 7.2:
- cleanup win32/64 docker files
- update test-mingw test
- add flex/bison to debian-all-test
- handle --enable-static/--disable-pie in config
- extend timeouts on x86_64 avocado tests
- add flex/bison to debian-hexagon-cross
- use regular semihosting for nios2 check-tcg
- fix obscure linker error to nios2 softmmu tests
- various windows portability fixes for tests
- clean-up of MAINTAINERS
- use -machine none when appropriate in avocado
- make raspi2_initrd test detect shutdown
- disable sh4 rd2 tests on gitlab
- re-enable threadcount/linux-test for sh4
- clean-up s390x handling of "ex" instruction
- better handle new CPUs in execlog plugin
- pass CONFIG_DEBUG_TCG to plugin builds
- try and avoid races in test-io-channel-command
- speed up ssh key checking for tests/vm
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmNhI/MACgkQ+9DbCVqe
# KkSFXggAg0HIpBDcNz0V5Mh5p69F14pwbDSygKqGDFBebdOHeL7f+WCvQPUGEWxp
# 814zjvRY3SC4Mo4mtzguRvNu0styaUpemvRw5FDYK48GpEjg2eVxTnAFD4nr7ud0
# dhw3iaHP+RjA6s3EpPUqQ5nlZEgFJ+Tvkckk3wKSpksBYA4tJra6Uey5kpZ27x0T
# KOzB2P6w+9B/B11n/aeSxvRPZdnXt2MyfS/3pwwfoFYioEyaEQ3Ie6ooachtdSL3
# PEvnJVK0VVYbZQwBXJlycNLlK/D++s4AEwmnZ5GmvDFuXlkRO9YMy9Wa5TKJl7gz
# 76Aw1KHsE03SyAPvH4bE7eGkIwhJOQ==
# =6hXE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 01 Nov 2022 09:49:39 EDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-for-7.2-011122-3' of https://github.com/stsquad/qemu: (31 commits)
tests/vm: use -o IdentitiesOnly=yes for ssh
tests/unit: cleanups for test-io-channel-command
contrib/plugins: protect execlog's last_exec expansion
contrib/plugins: enable debug on CONFIG_DEBUG_TCG
tests/tcg: include CONFIG_PLUGIN in config-host.mak
target/s390x: fake instruction loading when handling 'ex'
target/s390x: don't probe next pc for EXecuted insns
target/s390x: don't use ld_code2 to probe next pc
tests/tcg: re-enable threadcount for sh4
tests/tcg: re-enable linux-test for sh4
tests/avocado: disable sh4 rd2 tests on Gitlab
tests/avocado: raspi2_initrd: Wait for guest shutdown message before stopping
tests/avocado: set -machine none for userfwd and vnc tests
MAINTAINERS: fix-up for check-tcg Makefile changes
MAINTAINERS: add features_to_c.sh to gdbstub files
MAINTAINERS: add entries for the key build bits
hw/usb: dev-mtp: Use g_mkdir()
block/vvfat: Unify the mkdir() call
tcg: Avoid using hardcoded /tmp
semihosting/arm-compat-semi: Avoid using hardcoded /tmp
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmNgIqAeHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfWU0H/iG6k04L9jrKJ4ao
wA/CQlvRxG+gRSj1I5oeuLJEqoMSzU5d5flQNPpfv068wngIS/0gHM7UNRGDAOIj
8Gu6lf+eB0lwOlmF0Gq2o9/RV6ZWEZtziX3s7G6CYQK0tkQsKZBD36P3Mssr3pWt
2XX44eV1qULreFEHWT6I97zV9gFTEuHXJ3j8YDuz7fpqW1B38WUq1TOftiMi9JP4
PEVhfTOwi6MhsrRpt2uouGPLhmANLucvaXgKgMFRHyy0xOlzYKxjKXbq6nbAFSRd
8xEbnLaMWHUKtsmsxtjPJnCV9obO7YzPLXJBLbg2CxhEc/ktDC7YjKL5EXLT2mHC
s7kVfyM=
=rc9K
-----END PGP SIGNATURE-----
Merge tag 'qemu-macppc-20221031' of https://github.com/mcayland/qemu into staging
qemu-macppc updates for 7.2
# -----BEGIN PGP SIGNATURE-----
#
# iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmNgIqAeHG1hcmsuY2F2
# ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfWU0H/iG6k04L9jrKJ4ao
# wA/CQlvRxG+gRSj1I5oeuLJEqoMSzU5d5flQNPpfv068wngIS/0gHM7UNRGDAOIj
# 8Gu6lf+eB0lwOlmF0Gq2o9/RV6ZWEZtziX3s7G6CYQK0tkQsKZBD36P3Mssr3pWt
# 2XX44eV1qULreFEHWT6I97zV9gFTEuHXJ3j8YDuz7fpqW1B38WUq1TOftiMi9JP4
# PEVhfTOwi6MhsrRpt2uouGPLhmANLucvaXgKgMFRHyy0xOlzYKxjKXbq6nbAFSRd
# 8xEbnLaMWHUKtsmsxtjPJnCV9obO7YzPLXJBLbg2CxhEc/ktDC7YjKL5EXLT2mHC
# s7kVfyM=
# =rc9K
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 31 Oct 2022 15:31:44 EDT
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* tag 'qemu-macppc-20221031' of https://github.com/mcayland/qemu:
mac_newworld: Turn CORE99_VIA_CONFIG defines into an enum
mac_{old|new}world: Code style fix adding missing braces to if-s
mac_nvram: Use NVRAM_SIZE constant
hw/ppc/mac.h: Rename to include/hw/nvram/mac_nvram.h
hw/ppc/mac.h: Move PROM and KERNEL defines to board code
hw/ppc/mac.h: Move grackle-pcihost type declaration out to a header
hw/ppc/mac.h: Move macio specific parts out from shared header
hw/ppc/mac.h: Move newworld specific parts out from shared header
mac_{old|new}world: Reduce number of QOM casts
mac_newworld: Clean up creation of Uninorth devices
mac_{old|new}world: Avoid else branch by setting default value
mac_{old|new}world: Set tbfreq at declaration
mac_oldworld: Drop some more variables
mac_newworld: Drop some variables
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test to detect races between munmap() and creating new threads.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20221028124227.2354792-3-iii@linux.ibm.com>
[rth: add more return insns]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Delay cpu_list_add until realize is complete, so that cross-cpu
interaction does not happen with incomplete cpu state. For this,
we must delay plugin initialization out of tcg_exec_realizefn,
because no cpu_index has been assigned.
Fixes a problem with cross-cpu jump cache flushing, when the
jump cache has not yet been allocated.
Fixes: a976a99a29 ("include/hw/core: Create struct CPUJumpCache")
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The helpers for reset_rf, cli, sti, clac, stac are
completely trivial; implement them inline.
Drop some nearby #if 0 code.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The value passed is always true, and if the target's
synchronize_from_tb hook is non-trivial, not exiting
may be erroneous.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we do not plan to exit, use cpu_unwind_state_data
and extract exactly the data requested.
This is a bug fix, in that we no longer clobber dflag.
Consider:
l.j L2 // branch
l.mfspr r1, ppc // delay
L1: boom
L2: l.lwa r3, (r4)
Here, dflag would be set by cpu_restore_state (because that is the current
state of the cpu), but but not cleared by tb_stop on exiting the TB
(because DisasContext has recorded the current value as zero).
The next TB begins at L2 with dflag incorrectly set. If the load has a
tlb miss, then the exception will be delivered as per a delay slot:
with DSX set in the status register and PC decremented (delay slots
restart by re-executing the branch). This will cause the return from
interrupt to go to L1, and boom!
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have called cpu_restore_state asserting will_exit.
Do not go back on that promise. This affects icount.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Avoid cpu_restore_state, and modifying env->eip out from
underneath the translator with TARGET_TB_PCREL. There is
some slight duplication from x86_restore_state_to_opc,
but it's just a few lines.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1269
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When one has a lot of keys in ~/.ssh directory, the ssh command will
try all of them before the one specified on the command line, and this
may cause the remote ssh server to reject the connection due to too
many failed authentication attempts.
Fix by adding -o IdentitiesOnly=yes, which makes the ssh client
consider only the keys specified on the command line.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221027113026.2280863-1-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-31-alex.bennee@linaro.org>
This test is hanging under heavy load when the two socats race while
trying to create the socket. I've tried various approaches to avoid
the race but it seems "creat=0" won't stop socat trying to create a
pipe if it executes first. In the end I just use a small sleep which
seems to be reliable enough on the load situations I've tried.
While I was there I also properly created a tmpdir for the socket to
live in which is cleaned up at the end of the test.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Message-Id: <20221027183637.2772968-30-alex.bennee@linaro.org>
We originally naively treated expansion as safe because we expected
each new CPU/thread to appear in order. However the -M raspi2 model
triggered a case where a new high cpu_index thread started executing
just before a smaller one.
Clean this up by converting the GArray into the simpler GPtrArray and
then holding a lock for the expansion.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221027183637.2772968-29-alex.bennee@linaro.org>
