This command returns to guest information on LAPIC bus frequency and TSC
frequency.
One can see how this interface is used by Linux vmware_platform_setup()
introduced in Linux commit 88b094fb8d4f ("x86: Hypervisor detection and
get tsc_freq from hypervisor").
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200312165431.82118-16-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Command currently returns that it is unimplemented by setting
the reserved-bit in it's return value.
Following patches will return various useful vCPU information
to guest.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200312165431.82118-13-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is VMware documented functionallity that some guests rely on.
Returns the BIOS UUID of the current virtual machine.
Note that we also introduce a new compatability flag "x-cmds-v2" to
make sure to expose new VMPort commands only to new machine-types.
This flag will also be used by the following patches that will introduce
additional VMPort commands.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200312165431.82118-10-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No functional change.
Defining an enum for all VMPort commands have the following advantages:
* It gets rid of the error-prone requirement to update VMPORT_ENTRIES
when new VMPort commands are added to QEMU.
* It makes it clear to know by looking at one place at the source, what
are all the VMPort commands supported by QEMU.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200312165431.82118-9-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No functional change. This is mere refactoring.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200312165431.82118-8-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This can be allow to include controller-specific data while
saving/loading in-flight scsi requests of the vmbus scsi controller.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424123444.3481728-7-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guest OS uses ACPI to discover VMBus presence. Add a corresponding
entry to DSDT in case VMBus has been enabled.
Experimentally Windows guests were found to require this entry to
include two IRQ resources. They seem to never be used but they still
have to be there.
Make IRQ numbers user-configurable via corresponding properties; use 7
and 13 by default.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424123444.3481728-6-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the VMBus infrastructure -- bus, devices, root bridge, vmbus state
machine, vmbus channel interactions, etc.
VMBus is a collection of technologies. At its lowest layer, it's a message
passing and signaling mechanism, allowing efficient passing of messages to and
from guest VMs. A layer higher, it's a mechanism for defining channels of
communication, where each channel is tagged with a type (which implies a
protocol) and a instance ID. A layer higher than that, it's a bus driver,
serving as the basis of device enumeration within a VM, where a channel can
optionally be exposed as a paravirtual device. When a server-side (paravirtual
back-end) component wishes to offer a channel to a guest VM, it does so by
specifying a channel type, a mode, and an instance ID. VMBus then exposes this
in the guest.
More information about VMBus can be found in the file
vmbuskernelmodeclientlibapi.h in Microsoft's WDK.
TODO:
- split into smaller palatable pieces
- more comments
- check and handle corner cases
Kudos to Evgeny Yakovlev (formerly eyakovlev@virtuozzo.com) and Andrey
Smetatin (formerly asmetanin@virtuozzo.com) for research and
prototyping.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424123444.3481728-4-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a header with data structures and constants used in Hyper-V VMBus
hypervisor <-> guest interactions.
Based on the respective stuff from Linux kernel.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424123444.3481728-3-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need "qom/object.h" to call object_ref()/object_unref(),
and to test the TYPE_DUMMY.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200504115656.6045-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We use the Object type all over the place.
Forward declare it in "qemu/typedefs.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200504115656.6045-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- header cleanups for plugins
- support wider watchpoints
- tweaks for unreliable and broken CI
- docker image fixes and verion bumps
- linux-user guest_base fixes
- remove flex/bison from various test images
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl7eZFMACgkQ+9DbCVqe
KkQ5IAf/f7icxRp2EK5+Tt1g2nP9/h1T5Vg7Lu76dPm+i8a4f1D/pKyimGMiMYbc
bGSQn+4rRohocdAS8rTkPfpBYauFvBxFMUCZThseeW4xYM2YcasvPAvsnQlauNy+
NrIkg6Ptaw7OSG6ecNJ+0qDiNvOzGz0l4+r+JvhF9LjfPmKlOhipnUY3huzreq2c
4nvlWPxNVx/Bc+bIVPO3F/zMwwyvZkcthCYZij7cBKN3y8LiP31khsR1GbVu7qxy
G1hl9j+2oJwzY9RpJBr8eVOrcn5OogIiXH22fBOn1SKAaxbg8m2quNy1iNGZuKNa
A7I+otZJtHbErWscNAdmtDPKUgepeg==
=LZKS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-080620-1' into staging
Various testing and misc fixes:
- header cleanups for plugins
- support wider watchpoints
- tweaks for unreliable and broken CI
- docker image fixes and verion bumps
- linux-user guest_base fixes
- remove flex/bison from various test images
# gpg: Signature made Mon 08 Jun 2020 17:16:19 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-misc-080620-1:
scripts/coverity-scan: Remove flex/bison packages
cirrus-ci: Remove flex/bison packages
tests/vm: Remove flex/bison packages
tests/docker: Remove flex/bison packages
linux-user: detect overflow of MAP_FIXED mmap
tests/tcg: add simple commpage test case
linux-user: deal with address wrap for ARM_COMMPAGE on 32 bit
linux-user: provide fallback pgd_find_hole for bare chroots
hw/virtio/vhost: re-factor vhost-section and allow DIRTY_MEMORY_CODE
docker: update Ubuntu to 20.04
tests/docker: fix pre-requisite for debian-tricore-cross
.shippable: temporaily disable some cross builds
.travis.yml: allow failure for unreliable hosts
exec: flush the whole TLB if a watchpoint crosses a page boundary
tests/plugin: correctly honour io_count
scripts/clean-includes: Mark 'qemu/qemu-plugin.h' as special header
qemu-plugin.h: add missing include <stddef.h> to define size_t
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for free page reporting. The idea is to function very similar
to how the balloon works in that we basically end up madvising the page as
not being used. However we don't really need to bother with any deflate
type logic since the page will be faulted back into the guest when it is
read or written to.
This provides a new way of letting the guest proactively report free
pages to the hypervisor, so the hypervisor can reuse them. In contrast to
inflate/deflate that is triggered via the hypervisor explicitly.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Message-Id: <20200527041407.12700.73735.stgit@localhost.localdomain>
We need to make certain to advertise support for page poison reporting if
we want to actually get data on if the guest will be poisoning pages.
Add a value for reporting the poison value being used if page poisoning is
enabled in the guest. With this we can determine if we will need to skip
free page reporting when it is enabled in the future.
The value currently has no impact on existing balloon interfaces. In the
case of existing balloon interfaces the onus is on the guest driver to
reapply whatever poison is in place.
When we add free page reporting the poison value is used to determine if
we can perform in-place page reporting. The expectation is that a reported
page will already contain the value specified by the poison, and the
reporting of the page should not change that value.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Message-Id: <20200527041400.12700.33251.stgit@localhost.localdomain>
Add a TPM2 ACPI table if a TPM2.0 sysbus device has been
dynamically instantiated.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200601095737.32671-4-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We plan to build the TPM2 table on ARM too. In order to reuse the
generation code, let's move build_tpm2() to aml-build.c.
No change in the implementation.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200601095737.32671-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
NVDIMMs can belong to their own proximity domains, as described by the
NFIT. In such cases, the SRAT needs to have Memory Affinity structures
in the SRAT for these NVDIMMs, otherwise Linux doesn't populate node
data structures properly during NUMA initialization. See the following
for an example failure case.
https://lore.kernel.org/linux-nvdimm/20200416225438.15208-1-vishal.l.verma@intel.com/
Introduce a new helper, nvdimm_build_srat(), and call it for both the
i386 and arm versions of 'build_srat()' to augment the SRAT with
memory affinity information for NVDIMMs.
The relevant command line options to exercise this are below. Nodes 0-1
contain CPUs and regular memory, and nodes 2-3 are the NVDIMM address
space.
-object memory-backend-ram,id=mem0,size=2048M
-numa node,nodeid=0,memdev=mem0,
-numa cpu,node-id=0,socket-id=0
-object memory-backend-ram,id=mem1,size=2048M
-numa node,nodeid=1,memdev=mem1,
-numa cpu,node-id=1,socket-id=1
-numa node,nodeid=2,
-object memory-backend-file,id=nvmem0,share,mem-path=nvdimm-0,size=16384M,align=1G
-device nvdimm,memdev=nvmem0,id=nv0,label-size=2M,node=2
-numa node,nodeid=3,
-object memory-backend-file,id=nvmem1,share,mem-path=nvdimm-1,size=16384M,align=1G
-device nvdimm,memdev=nvmem1,id=nv1,label-size=2M,node=3
Cc: Jingqi Liu <jingqi.liu@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Message-Id: <20200606000911.9896-3-vishal.l.verma@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Directly set the slot name when creating the device,
to display the device name in trace events.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-8-f4bug@amsat.org>
Add an entry for the 'empty_slot' device.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-7-f4bug@amsat.org>
Wire the dwc-hsotg (dwc2) emulation into Qemu
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Message-id: 20200520235349.21215-7-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Import the dwc-hsotg (dwc2) register definitions file from the
Linux kernel. This is a copy of drivers/usb/dwc2/hw.h from the
mainline Linux kernel, the only changes being to the header, and
two instances of 'u32' changed to 'uint32_t' to allow it to
compile. Checkpatch throws a boatload of errors due to the tab
indentation, but I would rather import it as-is than reformat it.
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-3-pauldzim@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add BCM2835 SOC MPHI (Message-based Parallel Host Interface)
emulation. It is very basic, only providing the FIQ interrupt
needed to allow the dwc-otg USB host controller driver in the
Raspbian kernel to function.
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Acked-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200520235349.21215-2-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
s390_pv_perf_clear_reset() is not a very helpful name since that
function needs to be called for a normal and a clear reset via
diag308.
Let's instead name it s390_pv_prep_reset() which reflects the purpose
of the function a bit better.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200505124159.24099-1-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Rename qemu_ram_writeback() as qemu_ram_msync() to better
match what it does.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200508062456.23344-5-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200508062456.23344-3-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We usually use '_do_' for internal functions. Rename
memory_region_do_writeback() as memory_region_writeback().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200508062456.23344-2-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows us to keep pc-bios in executable_dir/pc-bios, rather than
executable_dir/../pc-bios, which is incompatible with oss-fuzz' file
structure.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200512030133.29896-2-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds a barebone OpenTitan machine to QEMU.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
As the functions declared in this header use the symbol_fn_t
typedef itself declared in "hw/loader.h", we need to include
it here to make the header file self-contained.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
The ISA specific Spike machines have been deprecated in QEMU since 4.1,
let's finally remove them.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
No host backend support yet, but the interfaces for rotls
are in place. Only implement left-rotate for now, as the
only known use of vector rotate by scalar is s390x, so any
right-rotate would be unused and untestable.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No host backend support yet, but the interfaces for rotlv
and rotrv are in place.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Drop the generic expansion from rot to shift; we can do better
for each backend, and then this code becomes unused.
No host backend support yet, but the interfaces for rotli
are in place. Canonicalize immediate rotate to the left,
based on a survey of architectures, but provide both left
and right shift interfaces to the translators.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
"migration/vmstate.h" only uses pointer to MemoryRegion, which
is already forward declared in "qemu/typedefs.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200530165512.15225-1-f4bug@amsat.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This started off as Andreas Färber's implementation from
March 2015, but after feedback from Paolo and Markus it morphed into
using the json output which handles structs reasonably.
Use with qom-list to find the members of an object.
(qemu) qom-get /backend/console[0]/device/vga.rom[0] size
65536
(qemu) qom-get /machine smm
"auto"
(qemu) qom-get /machine rtc-time
{
"tm_year": 120,
"tm_sec": 51,
"tm_hour": 9,
"tm_min": 50,
"tm_mon": 4,
"tm_mday": 20
}
(qemu) qom-get /machine frob
Error: Property '.frob' not found
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200520151108.160598-2-dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
To be used for bitmap migration in further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521220648.3255-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl7OsEcACgkQIeENKd+X
cFSnDwgAmysoO9ERML98IWkxsGjakXhe3SCCij1FdwARYtQrJt/yjaUmg9tTWxa2
qwrYDM70G7hNBMtqrJOGFG8nO8LWPkI6N88tNKrFO7ariO2uyb3mKdivt+EVjlhG
o7vuhZ07xNmqote1zd1eeva+mu3a1pleL57dimlbkzINZp4Wc47n3TwT3WQNAO3J
jKSbhqaFIXFpuLeXyFUNkd/liKFOcXXo0eV4XyKbYglcB2iX22m3NnGsH0PZMWoe
hwKwOjk15fOeHbUcgkeah9vcZ2b5T17SmjU8ihHawU18CFaZ0zlAVWJdYWzdG6a/
CFW2uQhLI6e7Y39PweEqvw7wyjxO3w==
=X6Pz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-register-api-20200527' into staging
A single patch to avoid clashes with the regiser field macros.
# gpg: Signature made Wed 27 May 2020 19:24:07 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-register-api-20200527:
hw/registerfields: Prefix local variables with underscore in macros
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When trying to consume the DEFINE_EDID_PROPERTIES() macro
by including "hw/display/edid.h", we get this build failure:
include/hw/display/edid.h:24:5: error: implicit declaration of
function ‘DEFINE_PROP_UINT32’ [-Werror=implicit-function-declaration]
24 | DEFINE_PROP_UINT32("xres", _state, _edid_info.prefx, 0), \
| ^~~~~~~~~~~~~~~~~~
Headers should be self-contained, and one shouldn't have to
dig to find the missing headers.
In this case "hw/qdev-properties.h" is missing. Add it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-2-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
One can name a local variable holding a value as 'v', but it
currently clashes with the registerfields macros. To save others
to debug the same mistake, prefix the macro's local variables
with an underscore.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200510203457.10546-1-f4bug@amsat.org
Message-Id: <20200510203457.10546-1-f4bug@amsat.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
On reboot, all memory that was previously added using object_add and
device_add is placed in this DIMM area.
The new SPAPR_LMB_FLAGS_HOTREMOVABLE flag helps Linux to put this memory in
the correct memory zone, so no unmovable allocations are made there,
allowing the object to be easily hot-removed by device_del and
object_del.
This new flag was accepted in Power Architecture documentation.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Message-Id: <20200511200201.58537-1-leobras.c@gmail.com>
[dwg: Fixed syntax error spotted by Cédric Le Goater]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
i.MX7 supports watchdog pretimeout interupts. With this commit,
the watchdog in mcimx7d-sabre is fully operational, including
pretimeout support.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200517162135.110364-9-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instantiating PWM, CAN, CAAM, and OCOTP devices is necessary to avoid
crashes when booting mainline Linux.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200517162135.110364-8-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this patch, the watchdog on i.MX31 emulations is fully operational.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200517162135.110364-5-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this commit, the watchdog on imx25-pdk is fully operational,
including pretimeout support.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200517162135.110364-4-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement full support for the watchdog in i.MX systems.
Pretimeout support is optional because the watchdog hardware
on i.MX31 does not support pretimeouts.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200517162135.110364-3-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added Property array terminator entry]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for a full implementation, move i.MX watchdog driver
from hw/misc to hw/watchdog. While at it, add the watchdog files
to MAINTAINERS.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200517162135.110364-2-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes *_is_any_nan, *_is_neg, *_is_inf, etc.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the floatx80 compare specializations with inline functions
that call the standard floatx80_compare{,_quiet} functions.
Use bool as the return type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the float128 compare specializations with inline functions
that call the standard float128_compare{,_quiet} functions.
Use bool as the return type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the float64 compare specializations with inline functions
that call the standard float64_compare{,_quiet} functions.
Use bool as the return type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the float32 compare specializations with inline functions
that call the standard float32_compare{,_quiet} functions.
Use bool as the return type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Give the previously unnamed enum a typedef name. Use it in the
prototypes of compare functions. Use it to hold the results
of the compare functions.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Give the previously unnamed enum a typedef name. Use the packed
attribute so that we do not affect the layout of the float_status
struct. Use it in the prototypes of relevant functions.
Adjust switch statements as necessary to avoid compiler warnings.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Slightly tidies the usage within softfloat.c and the
representation in float_status.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have had this on the to-do list for quite some time.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The next patch will split blockdev.c, which will require accessing
some previously-static functions from more than one .c file. But part
of promoting a function to public is picking a naming scheme that does
not reek of exposing too many internals (two of the three functions
were named starting with 'do_'). To make future code motion easier,
perform the function rename and non-static promotion into its own
patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513011648.166876-5-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Upcoming patches will enhance bitmap support in qemu-img, but in doing
so, it turns out to be nice to suppress output when persistent bitmaps
make no sense (such as on a qcow2 v2 image). Add a hook to make this
easier to query.
This patch adds a new callback .bdrv_supports_persistent_dirty_bitmap,
rather than trying to shoehorn the answer in via existing callbacks.
In particular, while it might have been possible to overload
.bdrv_co_can_store_new_dirty_bitmap to special-case a NULL input to
answer whether any persistent bitmaps are supported, that is at odds
with whether a particular bitmap can be stored (for example, even on
an image that supports persistent bitmaps but has currently filled up
the maximum number of bitmaps, attempts to store another one should
fail); and the new functionality doesn't require coroutine safety.
Similarly, we could have added one more piece of information to
.bdrv_get_info, but then again, most callers to that function tend to
already discard extraneous information, and making it a catch-all
rather than a series of dedicated scalar queries hasn't really
simplified life.
In the future, when we improve the ability to look up bitmaps through
a filter, we will probably also want to teach the block layer to
automatically let filters pass this request on through.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513011648.166876-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
- Introduce real BdrvChildRole
- blk/bdrv_make_empty() functions instead of calling callbacks directly
- mirror: Make sure that source and target size match
- block-copy: Fix uninitialized variable
- block/replication: Avoid cancelling the job twice
- ahci: Log lost IRQs
- iotests: Run pylint and mypy in a testcase
- iotests: log messages from notrun()
-----BEGIN PGP SIGNATURE-----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=JSKK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Introduce real BdrvChildRole
- blk/bdrv_make_empty() functions instead of calling callbacks directly
- mirror: Make sure that source and target size match
- block-copy: Fix uninitialized variable
- block/replication: Avoid cancelling the job twice
- ahci: Log lost IRQs
- iotests: Run pylint and mypy in a testcase
- iotests: log messages from notrun()
# gpg: Signature made Mon 18 May 2020 18:05:32 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (52 commits)
hw: Use QEMU_IS_ALIGNED() on parallel flash block size
iotests/030: Reduce run time by unthrottling job earlier
hw/ide/ahci: Log lost IRQs
iotests: log messages from notrun()
block/block-copy: Simplify block_copy_do_copy()
block/block-copy: Fix uninitialized variable in block_copy_task_entry
block: Drop @child_class from bdrv_child_perm()
block: Pass BdrvChildRole in remaining cases
block: Drop child_file
block: Drop bdrv_format_default_perms()
block: Make bdrv_filter_default_perms() static
block: Use bdrv_default_perms()
tests: Use child_of_bds instead of child_file
block: Use child_of_bds in remaining places
block: Make filter drivers use child_of_bds
block: Make format drivers use child_of_bds
block: Drop child_backing
block: Make backing files child_of_bds children
block: Drop child_format
block: Switch child_format users to child_of_bds
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Import win32 keyboard hooking code from project spice-gtk. This
patch removes the extra left control key up/down input events
inserted by Windows for the right alt key up/down input events
with international keyboard layouts. Additionally there's some
code to grab the keyboard.
The next patches will use this code.
Only Windows needs this.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The glib event loop does not call fdmon_io_uring_wait() so fd handlers
waiting to be submitted build up in the list. There is no benefit is
using io_uring when the glib GSource is being used, so disable it
instead of implementing a more complex fix.
This fixes a memory leak where AioHandlers would build up and increasing
amounts of CPU time were spent iterating them in aio_pending(). The
symptom is that guests become slow when QEMU is built with io_uring
support.
Buglink: https://bugs.launchpad.net/qemu/+bug/1877716
Fixes: 73fd282e7b ("aio-posix: add io_uring fd monitoring implementation")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Message-id: 20200511183630.279750-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implementations should decide the necessary permissions based on @role.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-35-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-33-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-32-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-31-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-25-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-23-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This callback can be used by BDSs that use child_of_bds with the
appropriate BdrvChildRole for their children.
Also, make bdrv_format_default_perms() use it for child_of_bds children
(just a temporary solution until we can drop bdrv_format_default_perms()
altogether).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-20-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Any current user of child_file, child_format, and child_backing can and
should use this generic BdrvChildClass instead, as it can handle all of
these cases. However, to be able to do so, the users must pass the
appropriate BdrvChildRole when the child is created/attached. (The
following commits will take care of that.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-15-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We plan to unify the generic .inherit_options() functions. The
resulting common function will need to decide whether to force-enable
format probing, force-disable it, or leave it as-is. To make this
decision, it will need to know whether the parent node is a format node
or not (because we never want format probing if the parent is a format
node already (except for the backing chain)).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-9-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, all callers (effectively) pass 0 and no callee evaluates thie
value. Later patches will change both.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-8-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, all callers pass 0 and no callee evaluates this value. Later
patches will change both.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-7-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, it is always set to 0. Later patches in this series will
ensure that all callers pass an appropriate combination of flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-6-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This mask will supplement BdrvChildClass when it comes to what role (or
combination of roles) a child takes for its parent. It consists of
BdrvChildRoleBits values (which is an enum).
Because empty enums are not allowed, let us just start with it filled.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-5-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This structure nearly only contains parent callbacks for child state
changes. It cannot really reflect a child's role, because different
roles may overlap (as we will see when real roles are introduced), and
because parents can have custom callbacks even when the child fulfills a
standard role.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200513110544.176672-4-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to unify child_format and child_file at some point. One of the
important things that set format drivers apart from other drivers is
that they do not expect other format nodes under them (except in the
backing chain), i.e. we must not probe formats inside of formats. That
means we need something on which to distinguish format drivers from
others, and hence this flag.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200513110544.176672-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Two callers of BlockDriver.bdrv_make_empty() remain that should not call
this method directly. Both do not have access to a BdrvChild, but they
can use a BlockBackend, so we add this function that lets them use it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200429141126.85159-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Right now, all users of bdrv_make_empty() call the BlockDriver method
directly. That is not only bad style, it is also wrong, unless the
caller has a BdrvChild with a WRITE or WRITE_UNCHANGED permission.
(WRITE_UNCHANGED suffices, because callers generally use this function
to clear a node with a backing file after a commit operation.)
Introduce bdrv_make_empty() that verifies that it does.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200429141126.85159-2-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit f79081b4b7.
Patch has broken byteorder handling: RAMFBCfg fields are in bigendian
byteorder, the reset function doesn't care so native byteorder is used
instead. Given this went unnoticed so far the feature is obviously
unused, so just revert the patch.
Cc: Hou Qiming <hqm03ster@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200429115236.28709-2-kraxel@redhat.com
Rename qemu_plugin_hwaddr_is_io() address argument 'haddr'
similarly to qemu_plugin_hwaddr_device_offset(), and make
it const.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200510171119.20827-4-f4bug@amsat.org>
Message-Id: <20200513173200.11830-4-alex.bennee@linaro.org>
Simplify the ifdef'ry by moving all stubs together.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200510171119.20827-3-f4bug@amsat.org>
Message-Id: <20200513173200.11830-3-alex.bennee@linaro.org>
Move the qemu_plugin_event enum declaration earlier.
This will make the next commit easier to review.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200510171119.20827-2-f4bug@amsat.org>
Message-Id: <20200513173200.11830-2-alex.bennee@linaro.org>
This will become useful shortly for providing more information about
output assembly inline. While there fix up the indenting and code
formatting in disas().
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200513175134.19619-9-alex.bennee@linaro.org>
We cannot at present limit a 64-bit guest to a virtual address
space smaller than the host. It will mostly work to ignore this
limitation, except if the guest uses high bits of the address
space for tags. But it will certainly work better, as presently
we can wind up failing to allocate the guest stack.
Widen our user-only page tree to the host or abi pointer width.
Remove the workaround for this problem from target/alpha.
Always validate guest addresses vs reserved_va, as there we
control allocation ourselves.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200513175134.19619-7-alex.bennee@linaro.org>
Same story as for object_property_add(): the only way
object_property_del() can fail is when the property with this name
does not exist. Since our property names are all hardcoded, failure
is a programming error, and the appropriate way to handle it is
passing &error_abort. Most callers do that, the commit before
previous fixed one that didn't (and got the error handling wrong), and
the two remaining exceptions ignore errors.
Drop the @errp parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
Several functions can't fail anymore: ich9_pm_add_properties(),
device_add_bootindex_property(), ppc_compat_add_property(),
spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp
parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-16-armbru@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
object_property_set_description() and
object_class_property_set_description() fail only when property @name
is not found.
There are 85 calls of object_property_set_description() and
object_class_property_set_description(). None of them can fail:
* 84 immediately follow the creation of the property.
* The one in spapr_rng_instance_init() refers to a property created in
spapr_rng_class_init(), from spapr_rng_properties[].
Every one of them still gets to decide what to pass for @errp.
51 calls pass &error_abort, 32 calls pass NULL, one receives the error
and propagates it to &error_abort, and one propagates it to
&error_fatal. I'm actually surprised none of them violates the Error
API.
What are we gaining by letting callers handle the "property not found"
error? Use when the property is not known to exist is simpler: you
don't have to guard the call with a check. We haven't found such a
use in 5+ years. Until we do, let's make life a bit simpler and drop
the @errp parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-8-armbru@redhat.com>
[One semantic rebase conflict resolved]
Some object_property_add_FOO() return the newly added property, some
don't. Clean that up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-7-armbru@redhat.com>
qom/object.c provides object_property_get_TYPE() and
object_property_set_TYPE() for a number of common types. These are
all convenience wrappers around object_property_get_qobject() and
object_property_set_qobject().
Except for object_property_get_uint16List(), which is unusual in two ways:
* It bypasses object_property_get_qobject(). Fixable; the previous
commit did it for object_property_get_enum())
* It stores the value through a parameter. Its contract claims it
returns the value, like the other functions do. Also fixable.
Fixing is not worthwhile, though: object_property_get_uint16List() has
seen exactly one user in six years.
Convert the lone user to do its job with the generic
object_property_get_qobject(), and drop object_property_get_uint16List().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200505152926.18877-6-armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[Commit message typo fixed]
Uses of gchar * in qom/object.h:
* ObjectProperty member @name
Functions that take a property name argument all use char *. Change
the member to match.
* ObjectProperty member @type
Functions that take a property type argument or return it all use
char *. Change the member to match.
* ObjectProperty member @description
Functions that take a property description argument all use char *.
Change the member to match.
* object_resolve_path_component() parameter @part
Path components are property names. Most callers pass char *
arguments. Change the parameter to match. Adjust the few callers
that pass gchar * to pass char *.
* Return value of object_get_canonical_path_component(),
object_get_canonical_path()
Most callers convert their return values right back to char *.
Change the return value to match. Adjust the few callers where that
would add a conversion to gchar * to use char * instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-3-armbru@redhat.com>
Add a SIGBUS signal handler. In this handler, it checks the SIGBUS type,
translates the host VA delivered by host to guest PA, then fills this PA
to guest APEI GHES memory, then notifies guest according to the SIGBUS
type.
When guest accesses the poisoned memory, it will generate a Synchronous
External Abort(SEA). Then host kernel gets an APEI notification and calls
memory_failure() to unmapped the affected page in stage 2, finally
returns to guest.
Guest continues to access the PG_hwpoison page, it will trap to KVM as
stage2 fault, then a SIGBUS_MCEERR_AR synchronous signal is delivered to
Qemu, Qemu records this error address into guest APEI GHES memory and
notifes guest using Synchronous-External-Abort(SEA).
In order to inject a vSEA, we introduce the kvm_inject_arm_sea() function
in which we can setup the type of exception and the syndrome information.
When switching to guest, the target vcpu will jump to the synchronous
external abort vector table entry.
The ESR_ELx.DFSC is set to synchronous external abort(0x10), and the
ESR_ELx.FnV is set to not valid(0x1), which will tell guest that FAR is
not valid and hold an UNKNOWN value. These values will be set to KVM
register structures through KVM_SET_ONE_REG IOCTL.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200512030609.19593-10-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
kvm_arch_on_sigbus_vcpu() error injection uses source_id as
index in etc/hardware_errors to find out Error Status Data
Block entry corresponding to error source. So supported source_id
values should be assigned here and not be changed afterwards to
make sure that guest will write error into expected Error Status
Data Block.
Before QEMU writes a new error to ACPI table, it will check whether
previous error has been acknowledged. If not acknowledged, the new
errors will be ignored and not be recorded. For the errors section
type, QEMU simulate it to memory section error.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-9-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
kvm_hwpoison_page_add() and kvm_unpoison_all() will both
be used by X86 and ARM platforms, so moving them into
"accel/kvm/kvm-all.c" to avoid duplicate code.
For architectures that don't use the poison-list functionality
the reset handler will harmlessly do nothing, so let's register
the kvm_unpoison_all() function in the generic kvm_init() function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Message-id: 20200512030609.19593-8-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Record the GHEB address via fw_cfg file, when recording
a error to CPER, it will use this address to find out
Generic Error Data Entries and write the error.
In order to avoid migration failure, make hardware
error table address to a part of GED device instead
of global variable, then this address will be migrated
to target QEMU.
Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-7-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch builds Hardware Error Source Table(HEST) via fw_cfg blobs.
Now it only supports ARMv8 SEA, a type of Generic Hardware Error
Source version 2(GHESv2) error source. Afterwards, we can extend
the supported types if needed. For the CPER section, currently it
is memory section because kernel mainly wants userspace to handle
the memory errors.
This patch follows the spec ACPI 6.2 to build the Hardware Error
Source table. For more detailed information, please refer to
document: docs/specs/acpi_hest_ghes.rst
build_ghes_hw_error_notification() helper will help to add Hardware
Error Notification to ACPI tables without using packed C structures
and avoid endianness issues as API doesn't need explicit conversion.
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-6-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch builds error_block_address and read_ack_register fields
in hardware errors table , the error_block_address points to Generic
Error Status Block(GESB) via bios_linker. The max size for one GESB
is 1kb, For more detailed information, please refer to
document: docs/specs/acpi_hest_ghes.rst
Now we only support one Error source, if necessary, we can extend to
support more.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-5-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
RAS Virtualization feature is not supported now, so
add a RAS machine option and disable it by default.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200512030609.19593-3-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The little end UUID is used in many places, so make
NVDIMM_UUID_LE to a common macro to convert the UUID
to a little end array.
Reviewed-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Message-id: 20200512030609.19593-2-gengdongjiu@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some stream clients stream an endless stream of data while
other clients stream data in packets. Stream interfaces
usually have a way to signal the end of a packet or the
last beat of a transfer.
This adds an end-of-packet flag to the push interface.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200506082513.18751-6-edgar.iglesias@gmail.com>
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We currently have target-endian versions of these operations,
but no easy way to force a specific endianness. This can be
helpful if the target has endian-specific operations, or a mode
that swaps endianness.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This new interface will allow targets to probe for a page
and then handle watchpoints themselves. This will be most
useful for vector predicated memory operations, where one
page lookup can be used for many operations, and one test
can avoid many watchpoint checks.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The NRF51 series SoC have 3 timer peripherals, each having
4 counters. To help differentiate which peripheral is accessed,
display the timer ID in the trace events.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200504072822.18799-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On the NRF51 series, all peripherals have a fixed I/O size
of 4KiB. Define NRF51_PERIPHERAL_SIZE and use it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200504072822.18799-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are minimal differences from Qemu's point of view between the A0
and A1 silicon revisions.
As the A1 exercises different code paths in u-boot it is desirable to
emulate that instead.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200504093703.261135-1-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that there are no clients of bdrv_has_zero_init_truncate, none of
the drivers need to worry about providing it.
What's more, this eliminates a source of some confusion: a literal
reading of the documentation as written in ceaca56f and implemented in
commit 1dcaf527 claims that a driver which returns 0 for
bdrv_has_zero_init_truncate() must not return 1 for
bdrv_has_zero_init(); this condition was violated for parallels, qcow,
and sometimes for vdi, although in practice it did not matter since
those drivers also lacked .bdrv_co_truncate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-10-eblake@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
First pull request for qemu-5.1. This includes:
* Removal of all remaining cases where we had CAS triggered reboots
* A number of improvements to NMI injection
* Support for partition scoped radix translation in softmmu
* Some fixes for NVDIMM handling
* A handful of other minor fixes
-----BEGIN PGP SIGNATURE-----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=INvG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.1-20200507' into staging
ppc patch queue for 2020-04-07
First pull request for qemu-5.1. This includes:
* Removal of all remaining cases where we had CAS triggered reboots
* A number of improvements to NMI injection
* Support for partition scoped radix translation in softmmu
* Some fixes for NVDIMM handling
* A handful of other minor fixes
# gpg: Signature made Thu 07 May 2020 06:00:55 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.1-20200507:
target-ppc: fix rlwimi, rlwinm, rlwnm for Clang-9
spapr_nvdimm: Tweak error messages
spapr_nvdimm.c: make 'label-size' mandatory
target/ppc: Add support for Radix partition-scoped translation
target/ppc: Rework ppc_radix64_walk_tree() for partition-scoped translation
target/ppc: Extend ppc_radix64_check_prot() with a 'partition_scoped' bool
target/ppc: Introduce ppc_radix64_xlate() for Radix tree translation
spapr: Don't allow unplug of NVLink2 devices
target/ppc: Assert if HV mode is set when running under a pseries machine
target/ppc: Introduce a relocation bool in ppc_radix64_handle_mmu_fault()
target/ppc: Enforce that the root page directory size must be at least 5
spapr: Drop CAS reboot flag
spapr/cas: Separate CAS handling from rebuilding the FDT
spapr: Simplify selection of radix/hash during CAS
ppc/pnv: Add support for NMI interface
ppc/spapr: tweak change system reset helper
spapr: Don't check capabilities removed between CAS calls
target/ppc: Improve syscall exception logging
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CAS reboot flag is false by default and all the locations that
could set it to true have been dropped. This means that all code
blocks depending on the flag being set is dead code and the other
code blocks should be executed always.
Just do that and drop the now uneeded CAS reboot flag. Fix a
comment on the way to make checkpatch happy.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158514994893.478799.11772512888322840990.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment "ibm,client-architecture-support" ("CAS") is implemented
in SLOF and QEMU assists via the custom H_CAS hypercall which copies
an updated flatten device tree (FDT) blob to the SLOF memory which
it then uses to update its internal tree.
When we enable the OpenFirmware client interface in QEMU, we won't need
to copy the FDT to the guest as the client is expected to fetch
the device tree using the client interface.
This moves FDT rebuild out to a separate helper which is going to be
called from the "ibm,client-architecture-support" handler and leaves
writing FDT to the guest in the H_CAS handler.
This should not cause any behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20200310050733.29805-3-aik@ozlabs.ru>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158514994229.478799.2178881312094922324.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAl6yxrEACgkQda1lgCoL
QhELMQf8CNGtB1xmiVL9GY3RJRkcWGTmQ5/wPJ+Fuf6A2fWP9bYWBemJQcqVN+xR
1fBXT2jcZvOy0N0CpioY2tin2oSWXCvVGcoaZbBpiDwGqzLrXzNheOKW9A3530zN
LAc8plTGpL90b2P/lkYSdUlBS3XK30wVdaxDtpFrhT43miJlRL16fTRDOjWPmNHi
+tbI/hGybI2wSjzotzB+g3cP54SD1eZJmXR0498vAJiO5OtpVdC/NGr4Ma+BT+If
Obf46XmgfCRLsqDJQbLNM6vVCN+MuE12BGVDSA2OX7oD6SBGQsb53asuqJ8TutWR
CsBs50WDMQFPgnOvMhHepFP/HzldaQ==
=VnhL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-05-06-1' into staging
Merge tpm 2020/05/06 v1
# gpg: Signature made Wed 06 May 2020 15:16:17 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2020-05-06-1:
hw: add compat machines for 5.1
hw/arm/virt: Remove the compat forcing tpm-tis-device PPI to off
tpm: tpm-tis-device: set PPI to false by default
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the benefit of compatibility of function pointer types,
we have standardized on int32_t and int64_t as the integral
argument to tcg expanders.
We converted most of them in 474b2e8f0f, but missed the rotates.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have this same parameter for GVecGen2i, GVecGen3,
and GVecGen3i. This will make some SVE2 insns easier
to parameterize.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For use when a target needs to pass a configure-specific
target_ulong value to duplicate.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These interfaces are now unused.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a version of tcg_gen_dup_* that takes both immediate and
a vector element size operand. This will replace the set of
tcg_gen_gvec_dup{8,16,32,64}i functions that encode the element
size within the function name.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a single patch to add support to the RegisterAPI for different
data sizes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl6x8d8ACgkQIeENKd+X
cFT3egf/cmwdK7/ICSY8axlQKQpaAxtkIvtTTdAmPYVWxyIuiEB9UCfU4xKzST7s
5gIPT3g0r1xixTUy4jueadDi9cieU0w5RsIt016w+riwSOSg+XJVg4pscswWBuTT
LRnAXMwua056NtJXJgd28X6Ul4oqVwUeUnOihrvDGzgnge862AKeGl+r6Bdwo0Wh
d7N2Ih+gG2+Nez+A5iHWmT1+Hk0yS0FB0cgPkHokDSTQdMQMcLLktF9j82Y50fZh
Ezy4vAr4Ng28urzkHPZ+qXiVwx8qqYb3YR1NPYMfnf63Wgj2eIlqIr2OvU5nm2A9
dqmddy7JxkJ4XttG3j2Y+WiN40q6TA==
=VSMG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-reg-to-apply-20200505' into staging
Pull request for RegisterAPI
This is a single patch to add support to the RegisterAPI for different
data sizes.
# gpg: Signature made Wed 06 May 2020 00:08:15 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-reg-to-apply-20200505:
hw/core/register: Add register_init_block8 helper.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- travis: drop macosx, tweak ppc64 native
- cirrus: fix FreeBSD, guard against future breakage
- gdbstub: support socket debug for linux-user
- gdbstub: add multiarch tests
- gdbstub: fixes for m68k
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl6ydk0ACgkQ+9DbCVqe
KkTcKQf+M+5B0HQsLVW5Z/n7zIL4v5LNRwtOt+a1zBusDgAUIsWKvfSpezk8ddCB
hr1qIgN9jdi3OfR/HDPTwqd++n+t7HTCadL4tO7to2iKRzdpM0oDbjo2+hgSNSX4
L5Nv79eEr1askD5rWq6QJZqJpeversvp2vvJcgJU4ukjsv7eTSfEW5iDS0DhOlx3
KM3prMY36KEYvch6yFwEatA7qerc08K06xi9M5Z2ZAjm5qKVNeC3tVkZSyxmubBn
LvmWt6zN/eHEUYM9qK+e9fAVhcreGNTJ7d2uB4XI+dA3tQOUXgdDKruxMc3rhoWZ
JlB2Tipj3R2I3fVJwwSAnpmxV+xZ4g==
=Uy3H
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-gdbstub-060520-1' into staging
Testing and gdbstub updates:
- travis: drop macosx, tweak ppc64 native
- cirrus: fix FreeBSD, guard against future breakage
- gdbstub: support socket debug for linux-user
- gdbstub: add multiarch tests
- gdbstub: fixes for m68k
# gpg: Signature made Wed 06 May 2020 09:33:17 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-gdbstub-060520-1:
target/m68k: fix gdb for m68xxx
tests/tcg: add a multiarch linux-user gdb test
tests/guest-debug: use the unix socket for linux-user tests
gdbstub/linux-user: support debugging over a unix socket
gdbstub: eliminate gdbserver_fd global
tests/tcg: drop inferior.was_attached() test
tests/tcg: better trap gdb failures
gdbstub: Introduce gdb_get_float64() to get 64-bit float registers
configure: favour gdb-multiarch if we have it
.travis.yml: reduce the load on [ppc64] GCC check-tcg
.cirrus.yml: bootstrap pkg unconditionally
.cirrus.yml: bump FreeBSD to the current stable release
.travis.yml: drop MacOSX
.travis.yml: show free disk space at end of run
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While debugging over TCP is fairly straightforward now we have test
cases that want to orchestrate via make and currently a parallel build
fails as two processes can't use the same listening port. While system
emulation offers a wide cornucopia of connection methods thanks to the
chardev abstraction we are a little more limited for linux user.
Thankfully the programming API for a TCP socket and a local UNIX
socket is pretty much the same once it's set up.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200430190122.4592-7-alex.bennee@linaro.org>
When converted to use GByteArray in commits 462474d760 and
a010bdbe71, the call to stfq_p() was removed. This call
serialize a float.
Since we now use a GByteArray, we can not use stfq_p() directly.
Introduce the gdb_get_float64() helper to load a float64 register.
Fixes: 462474d760 ("target/m68k: use gdb_get_reg helpers")
Fixes: a010bdbe71 ("extend GByteArray to read register helpers")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200414163853.12164-3-philmd@redhat.com>
Message-Id: <20200430190122.4592-3-alex.bennee@linaro.org>
There was no support for 8 bits block registers. Changed
register_init_block32 to be generic and static, adding register
size in bits as parameter. Created one helper for each size.
Signed-off-by: Joaquin de Andres <me@xcancerberox.com.ar>
Message-Id: <20200402162839.76636-1-me@xcancerberox.com.ar>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
-----BEGIN PGP SIGNATURE-----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=ibgH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging
trivial patches (20200504)
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
# gpg: Signature made Mon 04 May 2020 16:45:18 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-5.1-pull-request:
hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning
hw/timer/stm32f2xx_timer: Remove dead assignment
hw/gpio/aspeed_gpio: Remove dead assignment
hw/isa/i82378: Remove dead assignment
hw/ide/sii3112: Remove dead assignment
hw/input/adb-kbd: Remove dead assignment
hw/i2c/pm_smbus: Remove dead assignment
blockdev: Remove dead assignment
block: Avoid dead assignment
Compress lines for immediate return
chardev: Add macOS to list of OSes that support -chardev serial
MAINTAINERS: Update Keith Busch's email address
elf_ops: Don't try to g_mapped_file_unref(NULL)
hw/mem/pc-dimm: Fix line over 80 characters warning
hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug()
MAINTAINERS: Mark the LatticeMico32 target as orphan
timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write()
display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32()
scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are several callers that need to create a new block backend from
an existing BDS; make the task slightly easier with a common helper
routine.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424190903.522087-2-eblake@redhat.com>
[mreitz: Set @ret only in error paths, see
https://lists.nongnu.org/archive/html/qemu-block/2020-04/msg01216.html]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200428192648.749066-2-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
- __COUNTER__ doesn't work with ## concat
- replaced ## with glue() macro so __COUNTER__ is evaluated
Fixes: 3284c3ddc4
Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com>
Message-id: 20200404042108.389635-2-dnbrdsky@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The vmmouse helpers are only used in hw/i386/vmmouse.c,
make them static.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200504083342.24273-5-f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move 'vmport' related declarations in a target-specific header.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200504083342.24273-4-f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200504083342.24273-2-f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds support for nvdimm hotplug events through GED
and enables nvdimm for the arm/virt. Now Guests with ACPI
can have both cold and hot plug of nvdimms.
Hot removal functionality is not yet supported.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200421125934.14952-5-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds support to init nvdimm acpi state and build nvdimm acpi tables.
Please note nvdimm_support is not yet enabled.
Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200421125934.14952-4-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch makes IO base and size configurable to create NPIO AML for
ACPI NFIT. Since a different architecture like AArch64 does not use
port-mapped IO, a configurable IO base is required to create correct
mapping of ACPI IO address and size.
Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200421125934.14952-3-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add and use RTC_ISA_BASE define instead of hardcoding 0x70.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200429140003.7336-7-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Also add isa_aml_build() function which walks all isa devices.
This allows to move aml builder code to isa devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200429140003.7336-6-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200429140003.7336-2-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
macOS API for dealing with serial ports/ttys is identical to BSDs.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200426210956.17324-1-dottedmag@dottedmag.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Calling g_mapped_file_unref() on a NULL pointer is not valid, and
glib will assert if you try it.
$ qemu-system-arm -M virt -display none -device loader,file=/tmp/bad.elf
qemu-system-arm: -device loader,file=/tmp/bad.elf: GLib: g_mapped_file_unref: assertion 'file != NULL' failed
(One way to produce an ELF file that fails like this is to copy just
the first 16 bytes of a valid ELF file; this is sufficient to fool
the code in load_elf_ram_sym() into thinking it's an ELF file and
calling load_elf32() or load_elf64().)
The failure-exit path in load_elf can be reached from various points
in execution, and for some of those we haven't yet called
g_mapped_file_new_from_fd(). Add a condition to the unref call so we
only call it if we successfully created the GMappedFile to start with.
This will fix the assertion; for the specific case of the generic
loader it will then fall back from "guess this is an ELF file" to
"maybe it's a uImage or a hex file" and eventually to "just load as
a raw data file".
Reported-by: Randy Yates <yates@ieee.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200423202011.32686-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
hw/arm: versal: Add support for the RTC.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-10-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for SD.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-9-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Embed the APUs into the SoC type.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-8-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Embed the ADMAs into the SoC type.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-7-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Embed the GEMs into the SoC type.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-6-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Embed the UARTs into the SoC type.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-5-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Fix resize (extending) of short overlays
- nvme: introduce PMR support from NVMe 1.4 spec
- qemu-storage-daemon: Fix non-string --object properties
-----BEGIN PGP SIGNATURE-----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=ad71
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Fix resize (extending) of short overlays
- nvme: introduce PMR support from NVMe 1.4 spec
- qemu-storage-daemon: Fix non-string --object properties
# gpg: Signature made Thu 30 Apr 2020 16:51:45 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
qemu-storage-daemon: Fix non-string --object properties
qom: Factor out user_creatable_add_dict()
nvme: introduce PMR support from NVMe 1.4 spec
qcow2: Forward ZERO_WRITE flag for full preallocation
iotests: Test committing to short backing file
iotests: Filter testfiles out in filter_img_info()
block: truncate: Don't make backing file data visible
file-posix: Support BDRV_REQ_ZERO_WRITE for truncate
raw-format: Support BDRV_REQ_ZERO_WRITE for truncate
qcow2: Support BDRV_REQ_ZERO_WRITE for truncate
block-backend: Add flags to blk_truncate()
block: Add flags to bdrv(_co)_truncate()
block: Add flags to BlockDriver.bdrv_co_truncate()
qemu-iotests: allow qcow2 external discarded clusters to contain stale data
qcow2: Add incompatibility note between backing files and raw external data files
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After processing the option string with the keyval parser, we get a
QDict that contains only strings. This QDict must be fed to a keyval
visitor which converts the strings into the right data types.
qmp_object_add(), however, uses the normal QObject input visitor, which
expects a QDict where all properties already have the QType that matches
the data type required by the QOM object type.
Change the --object implementation in qemu-storage-daemon so that it
doesn't call qmp_object_add(), but calls user_creatable_add_dict()
directly instead and pass it a new keyval boolean that decides which
visitor must be used.
Reported-by: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The QMP handler qmp_object_add() and the implementation of --object in
qemu-storage-daemon can share most of the code. Currently,
qemu-storage-daemon calls qmp_object_add(), but this is not correct
because different visitors need to be used.
As a first step towards a fix, make qmp_object_add() a wrapper around a
new function user_creatable_add_dict() that can get an additional
parameter. The handling of "props" is only required for compatibility
and not required for the qemu-storage-daemon command line, so it stays
in qmp_object_add().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch introduces support for PMR that has been defined as part of NVMe 1.4
spec. User can now specify a pmrdev option that should point to HostMemoryBackend.
pmrdev memory region will subsequently be exposed as PCI BAR 2 in emulated NVMe
device. Guest OS can perform mmio read and writes to the PMR region that will stay
persistent across system reboot.
Signed-off-by: Andrzej Jakowski <andrzej.jakowski@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200330164656.9348-1-andrzej.jakowski@linux.intel.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that node level interface bdrv_truncate() supports passing request
flags to the block driver, expose this on the BlockBackend level, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that block drivers can support flags for .bdrv_co_truncate, expose
the parameter in the node level interfaces bdrv_co_truncate() and
bdrv_truncate().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a new BdrvRequestFlags parameter to the .bdrv_co_truncate()
driver callbacks, and a supported_truncate_flags field in
BlockDriverState that allows drivers to advertise support for request
flags in the context of truncate.
For now, we always pass 0 and no drivers declare support for any flag.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make compat in qemu_fdt_node_path() const char *.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200423121114.4274-3-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow name wildcards in qemu_fdt_node_path(). This is useful
to find all nodes with a given compatibility string.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200423121114.4274-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch the cadence uart to multi-phase reset and add the
reference clock input.
The input clock frequency is added to the migration structure.
The reference clock controls the baudrate generation. If it disabled,
any input characters and events are ignored.
If this clock remains unconnected, the uart behaves as before
(it default to a 50MHz ref clock).
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200406135251.157596-8-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a function and macro helpers to setup several clocks
in a device from a static array description.
An element of the array describes the clock (name and direction) as
well as the related callback and an optional offset to store the
created object pointer in the device state structure.
The array must be terminated by a special element QDEV_CLOCK_END.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-5-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add functions to easily handle clocks with devices.
Clock inputs and outputs should be used to handle clock propagation
between devices.
The API is very similar the GPIO API.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200406135251.157596-4-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-3-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This object may be used to represent a clock inside a clock tree.
A clock may be connected to another clock so that it receives update,
through a callback, whenever the source/parent clock is updated.
Although only the root clock of a clock tree controls the values
(represented as periods) of all clocks in tree, each clock holds
a local state containing the current value so that it can be fetched
independently. It will allows us to fullfill migration requirements
by migrating each clock independently of others.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-2-damien.hedde@greensocs.com
[PMM: Use uint64_t rather than unsigned long long in trace events;
the dtrace backend can't handle the latter]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With SmartFusion2 Ethernet MAC model in
place this patch adds the same to SoC.
Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1587048891-30493-3-git-send-email-sundeep.lkml@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Modelled Ethernet MAC of Smartfusion2 SoC.
Micrel KSZ8051 PHY is present on Emcraft's
SOM kit hence same PHY is emulated.
Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1587048891-30493-2-git-send-email-sundeep.lkml@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NRF51_GPIO_REG_CNF_END doesn't actually refer to the start of the last
valid CNF register: it's referring to the last byte of the last valid
CNF register.
This hasn't been a problem up to now, as current implementation in
memory.c turns an unaligned 4-byte read from 0x77f to a single byte read
and the qtest only looks at the least-significant byte of the register.
But when running with patches which fix unaligned accesses in memory.c,
the qtest breaks.
Considering NRF51 doesn't support unaligned accesses, the simplest fix
is to actually set NRF51_GPIO_REG_CNF_END to the start of the last valid
CNF register: 0x77c.
Now, qtests work with or without the unaligned access patches.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Message-id: 51b427f06838622da783d38ba56e3630d6d85c60.1586925392.git.dirty@apple.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The previous few commits have made this more obvious, and removed the
one exception. Time to clarify the documentation, and drop dead error
checking.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-13-armbru@redhat.com>
The contract demands v->start_alternate() for input and dealloc
visitors, but visit_start_alternate() actually requires it for input
and clone visitors. Fix the contract, and delete superfluous
qapi_dealloc_start_alternate().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-8-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-7-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-6-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-5-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-4-armbru@redhat.com>
Call visit_check_list(). Missed in commit a4a1c70dc7 "qapi: Make
input visitors detect unvisited list tails".
Drop an irrelevant error_propagate() while there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-3-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-2-armbru@redhat.com>
qdict_iter() has just three uses and no test coverage. Replace by
qdict_first(), qdict_next() for more concise code and less type
punning.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qlist_iter() has just three uses outside tests/. Replace by
QLIST_FOREACH_ENTRY() for more concise code and less type punning.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
QLIST_FOREACH_ENTRY() traverses a tail queue manually. Use
QTAILQ_FIRST() and QTAILQ_NEXT() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch adds an optional function pointer, "sym_cb", to
riscv_load_firmware() which provides the possibility to access
the symbol table during kernel loading.
The pointer is ignored, if supplied with flat (non-elf) firmware image.
The Spike board requires it locate the HTIF symbols from firmware ELF
passed via "-bios" option.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200427080644.168461-2-anup.patel@wdc.com
Message-Id: <20200427080644.168461-2-anup.patel@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present the board serial number is hard-coded to 1, and passed
to OTP model during initialization. Firmware (FSBL, U-Boot) uses
the serial number to generate a unique MAC address for the on-chip
ethernet controller. When multiple QEMU 'sifive_u' instances are
created and connected to the same subnet, they all have the same
MAC address hence it creates a unusable network.
A new "serial" property is introduced to specify the board serial
number. When not given, the default serial number 1 is used.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1573916930-19068-1-git-send-email-bmeng.cn@gmail.com>
[ Changed by AF:
- Use the SoC's serial property to pass the info to the SoC
- Fixup commit title
- Rebase on file restructuring
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present the board serial number is hard-coded to 1, and passed
to OTP model during initialization. Firmware (FSBL, U-Boot) uses
the serial number to generate a unique MAC address for the on-chip
ethernet controller. When multiple QEMU 'sifive_u' instances are
created and connected to the same subnet, they all have the same
MAC address hence it creates a unusable network.
A new "serial" property is introduced to the sifive_u SoC to specify
the board serial number. When not given, the default serial number
1 is used.
Suggested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
linux/kvm.h is not available on all platforms. Let us move
s390_machine_inject_pv_error into pv.c as it uses KVM structures.
Also rename the function to s390_pv_inject_reset_error.
While at it, ipl.h needs an include for "exec/address-spaces.h"
as it uses address_space_memory.
Fixes: c3347ed0d2 ("s390x: protvirt: Support unpack facility")
Reported-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200406100158.5940-2-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
SCLP for a protected guest is done over the SIDAD, so we need to use
the s390_cpu_pv_mem_* functions to access the SIDAD instead of guest
memory when reading/writing SCBs.
To not confuse the sclp emulation, we set 0x4000 as the SCCB address,
since the function that injects the sclp external interrupt would
reject a zero sccb address.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200319131921.2367-10-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The unpack facility provides the means to setup a protected guest. A
protected guest cannot be introspected by the hypervisor or any
user/administrator of the machine it is running on.
Protected guests are encrypted at rest and need a special boot
mechanism via diag308 subcode 8 and 10.
Code 8 sets the PV specific IPLB which is retained separately from
those set via code 5.
Code 10 is used to unpack the VM into protected memory, verify its
integrity and start it.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Co-developed-by: Christian Borntraeger <borntraeger@de.ibm.com> [Changes
to machine]
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200323083606.24520-1-frankja@linux.ibm.com>
[CH: fixed up KVM_PV_VM_ -> KVM_PV_]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
spd_data_generate() can pass @errp to error_setg() more than once when
it adjusts both memory size and type. Harmless, because no caller
passes anything that needs adjusting. Until the previous commit,
sam460ex passed types that needed adjusting, but not sizes.
spd_data_generate()'s contract is rather awkward:
If everything's fine, return non-null and don't set an error.
Else, if memory size or type need adjusting, return non-null and
set an error describing the adjustment.
Else, return null and set an error reporting why no data can be
generated.
Its callers treat the error as a warning even when null is returned.
They don't create the "smbus-eeprom" device then. Suspicious.
Since the previous commit, only "everything's fine" can actually
happen. Drop the unused code and simplify the callers. This gets rid
of the error API violation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200422134815.1584-3-armbru@redhat.com>
is_valid_option_list()'s purpose is ensuring qemu-img.c's can safely
join multiple parameter strings separated by ',' like this:
g_strdup_printf("%s,%s", params1, params2);
How it does that is anything but obvious. A close reading of the code
reveals that it fails exactly when its argument starts with ',' or
ends with an odd number of ','. Makes sense, actually, because when
the argument starts with ',', a separating ',' preceding it would get
escaped, and when it ends with an odd number of ',', a separating ','
following it would get escaped.
Move it to qemu-img.c and rewrite it the obvious way.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200415074927.19897-9-armbru@redhat.com>
