CONFIG_TPM is defined to a rather weird $(CONFIG_SOFTMMU) so that it
expands to the right thing in hw/Makefile.objs. This however is not
needed anymore and it has a corresponding hack in create_config
to turn it into "#define CONFIG_TPM 1". Clean up.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We make a few sub-directories recursively, in particular
$(TARGET_DIRS).
For goal "all", we do it the nice way: "all" has a prerequisite
subdir-T for each T in $(TARGET_DIRS), and T's recipe runs make
recursively. Behaves nicely with -j and -k.
For other goals such as "clean" and "install", the recipe runs make
recursively in a for loop. Ignores -j and -k.
The next commit will fix that for "clean" and "install". This commit
prepares the ground by renaming the targets we use for "all" to
include the goal for the sub-make. This will permit reusing them for
goals other than "all".
Targets subdir-T for T in $(TARGET_DIRS) run "make all" in T. Rename
to T/all, and declare phony.
Targets romsubdir-R for R in $(ROMS) run "make" in pc-bios/R. Default
goal is "all" for all R. Rename to pc-bios/R/all, and declare phony.
The remainder are renamed just for consistency.
Target subdir-dtc runs "make libbft/libfdt.a" in dtc. Rename to
dtc/all, and declare phony.
Target subdir-capstone runs make $(BUILD_DIR)/capstone/$(LIBCAPSTONE)
in $(SRC_PATH)/capstone. Rename to capstone/all, and declare phony.
Target subdir-slirp runs "make" in $(SRC_PATH)/slirp. Default goal is
all, which builds $(BUILD_DIR)/libslirp.a. Rename to slirp/all, and
declare phony.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190528082308.22032-4-armbru@redhat.com>
[Add compatibility gunk to keep make working across the rename]
Python 2 will reach end of life in January 1 2020. Declare it as
deprecated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190503193721.18459-1-ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ehabkost: print "warning:" in lowercase]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The sem_timedwait function has been annotated as requiring
non-null args in latest header files from GCC snapshot
representing the future 2.30 release.
This causes configure to fail when -Werror is used:
config-temp/qemu-conf.c: In function ‘main’:
config-temp/qemu-conf.c:2:25: error: null argument where non-null required (argument 1) [-Werror=nonnull]
2 | int main(void) { return sem_timedwait(0, 0); }
| ^~~~~~~~~~~~~
config-temp/qemu-conf.c:2:25: error: null argument where non-null required (argument 2) [-Werror=nonnull]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190617114114.24897-1-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The configure script breaks when the qemu source directory is in a path
containing white spaces, in particular the list of targets is not
correctly generated when calling "./configure --help" because of how the
default_target_list variable is built.
In addition to that, *building* qemu from a directory with spaces breaks
some assumptions in the Makefiles, even if the original source path does
not contain spaces like in the case of an out-of-tree build, or when
symlinks are involved.
To avoid these issues, refuse to run the configure script and the
Makefile if there are spaces or colons in the source path or the build
path, taking as inspiration what the kbuild system in linux does.
Buglink: https://bugs.launchpad.net/qemu/+bug/1817345
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Antonio Ospite <antonio.ospite@collabora.com>
Message-Id: <20190526144747.30019-3-ao2@ao2.it>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since commit 79d77bcd36 (configure: Remove --source-path option,
2019-04-29) source_path cannot be overridden anymore, move it out of the
"default parameters" block since the word "default" may suggest that the
value can change, while in fact it does not.
While at it, only set source_path once and separate the positional
argument of basename with "--" to more robustly cover the case of path
names starting with a dash.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Antonio Ospite <antonio.ospite@collabora.com>
Message-Id: <20190526144747.30019-2-ao2@ao2.it>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rewrite the implementation of the ssh block driver to use libssh instead
of libssh2. The libssh library has various advantages over libssh2:
- easier API for authentication (for example for using ssh-agent)
- easier API for known_hosts handling
- supports newer types of keys in known_hosts
Use APIs/features available in libssh 0.8 conditionally, to support
older versions (which are not recommended though).
Adjust the iotest 207 according to the different error message, and to
find the default key type for localhost (to properly compare the
fingerprint with).
Contributed-by: Max Reitz <mreitz@redhat.com>
Adjust the various Docker/Travis scripts to use libssh when available
instead of libssh2. The mingw/mxe testing is dropped for now, as there
are no packages for it.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190620200840.17655-1-ptoscano@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 5873173.t2JhDm7DL7@lindworm.usersys.redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is a left-over from commit 7aaa6a1637 "tpm: express dependencies
with Kconfig".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190524181411.8599-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Next pull request against qemu-4.1. Highlights:
* KVM accelerated support for the XIVE interrupt controller in PAPR
guests
* A number of TCG vector fixes
* Fixes for the PReP / 40p machine
* Improvements to make check-tcg test coverage
Other than that it's just a bunch of assorted fixes, cleanups and
minor improvements.
This supersedes both the pull request dated 2019-05-21 and the one
dated 2019-05-22. I've dropped one hunk which I think may have caused
the check-tcg failure that Peter saw (by enabling the ppc64abi32
build, which I think has been broken for ages). I'm not entirely
certain, since I haven't reproduced exactly the same failure.
-----BEGIN PGP SIGNATURE-----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=2q3B
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190529' into staging
ppc patch queue 2019-05-29
Next pull request against qemu-4.1. Highlights:
* KVM accelerated support for the XIVE interrupt controller in PAPR
guests
* A number of TCG vector fixes
* Fixes for the PReP / 40p machine
* Improvements to make check-tcg test coverage
Other than that it's just a bunch of assorted fixes, cleanups and
minor improvements.
This supersedes both the pull request dated 2019-05-21 and the one
dated 2019-05-22. I've dropped one hunk which I think may have caused
the check-tcg failure that Peter saw (by enabling the ppc64abi32
build, which I think has been broken for ages). I'm not entirely
certain, since I haven't reproduced exactly the same failure.
# gpg: Signature made Wed 29 May 2019 07:49:04 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.1-20190529: (44 commits)
ppc/pnv: add dummy XSCOM registers for PRD initialization
ppc/pnv: introduce new skiboot platform properties
spapr: Don't migrate the hpt_maxpagesize cap to older machine types
spapr: change default interrupt mode to 'dual'
spapr/xive: fix multiple resets when using the 'dual' interrupt mode
docs: provide documentation on the POWER9 XIVE interrupt controller
spapr/irq: add KVM support to the 'dual' machine
ppc/xics: fix irq priority in ics_set_irq_type()
spapr/irq: initialize the IRQ device only once
spapr/irq: introduce a spapr_irq_init_device() helper
spapr: check for the activation of the KVM IRQ device
spapr: introduce routines to delete the KVM IRQ device
sysbus: add a sysbus_mmio_unmap() helper
spapr/xive: activate KVM support
spapr/xive: add migration support for KVM
spapr/xive: introduce a VM state change handler
spapr/xive: add state synchronization with KVM
spapr/xive: add hcall support when under KVM
spapr/xive: add KVM support
spapr: Print out extra hints when CAS negotiation of interrupt mode fails
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a vhost-user gpu backend, based on virtio-gpu/3d device. It is
associated with a vhost-user-gpu device.
Various TODO and nice to have items:
- multi-head support
- crash & resume handling
- accelerated rendering/display that avoids the waiting round trips
- edid support
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
About half of the values to which CPU_CFLAGS is set
have multiple space separated arguments.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190501223819.8584-3-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We cannot use the ppc64le host compiler to build ppc64(be) guest code.
Clean up confusion between cross_cc_powerpc and cross_cc_ppc; make use
of the cflags variable as well.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190501223819.8584-2-richard.henderson@linaro.org>
[dwg: Dropped hunk relating to ppc64abi32, it doesn't test properly]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use qemu_guest_getrandom in aspeed, nrf51, bcm2835, exynos4210 rng devices.
Use qemu_guest_getrandom in target/ppc darn instruction.
Support ARMv8.5-RNG extension.
Support x86 RDRAND extension.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAlzllrsdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9/qAgAuYpF/gHrkfT+IFrw
OsgV1pPdhh+opxp44ayIQ6VC64voij0k/NnmC3/BxRv89yPqchvA6m0c2jzfGuwZ
ICpDt7LvFTrG9k8X9vEXbOTfh5dS/5g1o0LXiGU9RmMaC/5z2ZIabxU8K1Ti3+X0
P3B5s65rRQ8fPzOAMLEjeaHYQ/AOX/CNsmgFDve+d0b9tJY99UVO3Pb0h3+eR0s3
/4AHWG+IACGX7MVgFIfkEbGVnwboNiT20MUq3Exn2yGgg0IbLfoUazOnbfRz9jkX
kbN6nAZ+WDynf31SvvkEL/P6W5medf58ufJOiBB8opIp1E4WDdM30V8RkkPOyj4z
YOBmSw==
=2RnL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-rng-20190522' into staging
Introduce qemu_guest_getrandom.
Use qemu_guest_getrandom in aspeed, nrf51, bcm2835, exynos4210 rng devices.
Use qemu_guest_getrandom in target/ppc darn instruction.
Support ARMv8.5-RNG extension.
Support x86 RDRAND extension.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
# gpg: Signature made Wed 22 May 2019 19:36:43 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-rng-20190522: (25 commits)
target/i386: Implement CPUID_EXT_RDRAND
target/ppc: Use qemu_guest_getrandom for DARN
target/ppc: Use gen_io_start/end around DARN
target/arm: Implement ARMv8.5-RNG
target/arm: Put all PAC keys into a structure
hw/misc/exynos4210_rng: Use qemu_guest_getrandom
hw/misc/bcm2835_rng: Use qemu_guest_getrandom_nofail
hw/misc/nrf51_rng: Use qemu_guest_getrandom_nofail
aspeed/scu: Use qemu_guest_getrandom_nofail
linux-user: Remove srand call
linux-user/aarch64: Use qemu_guest_getrandom for PAUTH keys
linux-user: Use qemu_guest_getrandom_nofail for AT_RANDOM
linux-user: Call qcrypto_init if not using -seed
linux-user: Initialize pseudo-random seeds for all guest cpus
cpus: Initialize pseudo-random seeds for all guest cpus
util: Add qemu_guest_getrandom and associated routines
ui/vnc: Use gcrypto_random_bytes for start_auth_vnc
ui/vnc: Split out authentication_failed
crypto: Change the qcrypto_random_bytes buffer type to void*
crypto: Use getrandom for qcrypto_random_bytes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Prefer it to direct use of /dev/urandom.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For user-only, we require only the random number bits of the
crypto subsystem. Rename crypto-aes-obj-y to crypto-user-obj-y,
and add the random number objects, plus init.o to handle any
extra stuff the crypto library requires.
Move the crypto libraries from libs_softmmu and libs_tools to
LIBS, so that they are universally used.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
At least ubuntu 18.04 does not package static gnutls libraries.
At least Fedora 30 does not ship static nettle and gcrypt libraries.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190510012458.22706-2-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove it from the list of tools if --disable-system
and --disable-tools are used as we don't need it for
linux-user targets.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
[lv: I also disable it with disable-tools, not only with disable-system]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190401141222.30034-4-lvivier@redhat.com>
The Makefile tries to include device Kconfig dependencies via
-include $(SUBDIR_DEVICES_MAK_DEP)
and thus expects files that match *-softmmu/config-devices.mak.d ...
however, the minikconf script currently generates files a la
"*-softmmu-config.devices.mak.d" instead, so the dependency files
simply got ignored so far. For example, after a "touch hw/arm/Kconfig",
the arm-softmmu/config-devices.mak file is currently not re-generated.
Fix it by putting the dependency files in the *-softmmu folders now.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* configure: automatically pick python3 is available
(Daniel P. Berrangé)
* tests/acceptance (Cleber Rosa, Philippe Mathieu-Daudé):
* Multi-architecture test support
* Multiple arch-specific boot_linux_console test cases
* Increase verbosity of avocado by default
* docstring improvements
-----BEGIN PGP SIGNATURE-----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=GuGy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging
Python queue, 2019-05-02
* configure: automatically pick python3 is available
(Daniel P. Berrangé)
* tests/acceptance (Cleber Rosa, Philippe Mathieu-Daudé):
* Multi-architecture test support
* Multiple arch-specific boot_linux_console test cases
* Increase verbosity of avocado by default
* docstring improvements
# gpg: Signature made Fri 03 May 2019 01:40:06 BST
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/python-next-pull-request:
configure: automatically pick python3 is available
tests/boot_linux_console: add a test for alpha + clipper
tests/boot_linux_console: add a test for s390x + s390-ccw-virtio
tests/boot_linux_console: add a test for arm + virt
tests/boot_linux_console: add a test for aarch64 + virt
tests/boot_linux_console: add a test for mips64el + malta
tests/boot_linux_console: add a test for mips + malta
scripts/qemu.py: support adding a console with the default serial device
tests/boot_linux_console: refactor the console watcher into utility method
tests/boot_linux_console: increase timeout
tests/boot_linux_console: add common kernel command line options
tests/boot_linux_console: update the x86_64 kernel
tests/boot_linux_console: rename the x86_64 after the arch and machine
tests/acceptance: look for target architecture in test tags first
tests/acceptance: use "arch:" tag to filter target specific tests
tests/acceptance: introduce arch parameter and attribute
tests/acceptance: fix doc reference to avocado_qemu directory
tests/acceptance: improve docstring on pick_default_qemu_bin()
tests/acceptance: show avocado test execution by default
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# configure
The last *.aml file was removed in commit 13b1881aac.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190409053320.14612-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The pam test generates a warning on Fedora 29 with -O3 compilation
because the headers declare that the pam_conversation pointer to
pam_start must be non-NULL. Change it to use the same 0 initialised
structure as we actually use in qauthz.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190404091725.20595-1-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Unless overridden via an env var or configure arg, QEMU will only look
for the 'python' binary in $PATH. This is unhelpful on distros which
are only shipping Python 3.x (eg Fedora) in their default install as,
if they comply with PEP 394, the bare 'python' binary won't exist.
This changes configure so that by default it will search for all three
common python binaries, preferring to find Python 3.x versions.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190327170701.23798-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The slirp project is now hosted on freedesktop at:
https://gitlab.freedesktop.org/slirp.
The libslirp source was extracted from qemu/slirp filtered through
clang-format (available in project tree). The qemu slirp directory can
be swapped by a git submodule.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190424110041.8175-3-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
All major distributions do support libseccomp version >= 2.3.0, so there
is no need to special-case on various architectures any longer.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20190404183923.GA22347@ls3530.dellerweb.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When running "make" in a build directory from the pre-Kconfig merge time,
the build process currently fails with:
make: *** No rule to make target `.../default-configs/pci.mak',
needed by `aarch64-softmmu/config-devices.mak'. Stop.
To make sure that this problem at least goes away when the user runs
"configure" (or "sh config.status") again, we have to make sure that
we re-generate the .mak.d files. Thus remove the old stale files
while running the configure script.
Message-Id: <1552300145-12526-1-git-send-email-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Without the -Wno-typedef-redefinition option, clang complains if a typedef
gets redefined in gnu99 mode (since this is officially a C11 feature). This
used to also happen with older versions of GCC, but since we've bumped our
minimum GCC version to 4.8, all versions of GCC that we support do not seem
to issue this warning in gnu99 mode anymore. So this has become a common
problem for people who only test their code with GCC - they do not notice
the issue until they submit their patches and suddenly patchew or a
maintainer complains.
Now that we do not urgently need to keep the code clean from typedef
redefintions anymore with recent versions of GCC, we can ease the
situation with clang, too, and simply shut these warnings off for good.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190427154539.11336-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Normally configure identifies the source path by looking
at the location where the configure script itself exists.
We also provide a --source-path option which lets the user
manually override this.
There isn't really an obvious use case for the --source-path
option, and in commit 927128222b in 2017 we
accidentally added some logic that looks at $source_path
before the command line option that overrides it has been
processed.
The fact that nobody complained suggests that there isn't
any use of this option and we aren't testing it either;
remove it. This allows us to move the "make $source_path
absolute" logic up so that there is no window in the script
where $source_path is set but not yet absolute.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190318134019.23729-1-peter.maydell@linaro.org
Decompress and install the edk2 firmware blobs as part of "make install",
unless blob installation was disabled with configure's "--disable-blobs"
option.
Additionally, decompress the blobs as a pre-requisite for building softmmu
binaries -- this is helpful for both "make check" and other ad-hoc tests
one might want to run in the build directory.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This is an inverse selection which excludes a selected set of targets
from the default target list. It will mostly be useful for CI
configurations but it might be useful for some users as well.
You cannot specify --target-list and --target-list-exclude at the same
time.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The Windows QEMU guest agent erroneously tries to collect PCI information
directly from the physical drive. However, windows stores SCSI/IDE information
with the drive and PCI information with the underlying storage controller
This changes get_pci_info to use the physical drive's underlying storage
controller to get PCI information.
* Additionally Fixes incorrect size being passed to DeviceIoControl
when getting volume extents. Can occasionally crash the guest agent
Signed-off-by: Matt Hines <mhines@scalecomputing.com>
*fix up some checkpatch warnings
*fix domain reporting and add some sanity checks for debug
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The slirp code is not yet split off into a separate repository, so
configuring QEMU to use slirp as a submodule is premature. This
causes the non-existant "slirp" to be requested from git when syncing
submodules. This in turn appears to be cause of non-deterministic
failures some developers are seeing with QEMU's submodule sync process.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190313173157.30504-1-berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This uses iconv to convert glyphs from the specified VGA font encoding to
unicode, and makes use of cchar_t instead of chtype when using ncursesw,
which allows to store all wide char as well as the WACS values. The default
charset is made CP437 since that is the charset of the hardware default VGA
font. This also makes the curses backend set the LC_CTYPE locale to "" to
allow curses to emit wide characters.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Eddie Kohler <ekohler@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190311135127.2229-3-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
curses will use it for proper wide output support.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20190311135127.2229-2-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The glfs_*_async() functions do a callback once finished. This callback
has changed its arguments, pre- and post-stat structures have been
added. This makes it possible to improve caching, which is useful for
Samba and NFS-Ganesha, but not so much for QEMU. Gluster 6 is the first
release that includes these new arguments.
With an additional detection in ./configure, the new arguments can
conditionally get included in the glfs_io_cbk handler.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
New versions of Glusters libgfapi.so have an updated glfs_ftruncate()
function that returns additional 'struct stat' structures to enable
advanced caching of attributes. This is useful for file servers, not so
much for QEMU. Nevertheless, the API has changed and needs to be
adopted.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since OpenBSD 6.0 [1], W^X is enforced by default [2].
TCG requires WX access. Disable W^X if it is available.
This fixes:
# lm32-softmmu/qemu-system-lm32
Could not allocate dynamic translator buffer
# sysctl kern.wxabort=1
kern.wxabort: 0 -> 1
# lm32-softmmu/qemu-system-lm32
mmap: Not supported
Abort trap (core dumped)
# gdb -q lm32-softmmu/qemu-system-lm32 qemu-system-lm32.core
(gdb) bt
#0 0x000017e3c156c50a in _thread_sys___syscall () at {standard input}:5
#1 0x000017e3c15e5d7a in *_libc_mmap (addr=Variable "addr" is not available.) at /usr/src/lib/libc/sys/mmap.c:47
#2 0x000017e17d9abc8b in alloc_code_gen_buffer () at /usr/src/qemu/accel/tcg/translate-all.c:1064
#3 0x000017e17d9abd04 in code_gen_alloc (tb_size=0) at /usr/src/qemu/accel/tcg/translate-all.c:1112
#4 0x000017e17d9abe81 in tcg_exec_init (tb_size=0) at /usr/src/qemu/accel/tcg/translate-all.c:1149
#5 0x000017e17d9897e9 in tcg_init (ms=0x17e45e456800) at /usr/src/qemu/accel/tcg/tcg-all.c:66
#6 0x000017e17d9891b8 in accel_init_machine (acc=0x17e3c3f50800, ms=0x17e45e456800) at /usr/src/qemu/accel/accel.c:63
#7 0x000017e17d989312 in configure_accelerator (ms=0x17e45e456800, progname=0x7f7fffff07b0 "lm32-softmmu/qemu-system-lm32") at /usr/src/qemu/accel/accel.c:111
#8 0x000017e17d9d8616 in main (argc=1, argv=0x7f7fffff06b8, envp=0x7f7fffff06c8) at vl.c:4325
[1] https://www.openbsd.org/faq/upgrade60.html
[2] https://undeadly.org/cgi?action=article&sid=20160527203200
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190307142822.8531-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The configure script checks multiple times whether it works in a git
repository and it does this by "test -e "${source_path}/.git" in 4 cases
but in one case where it tries to enable werror "-d" is used there which
fails on git worktrees as .git is a file then and not a directory.
This changes the test to "-e" as other occurrences.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190228043503.68494-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move qdict-test-data.txt to the tests/data/qobject/ subdirectory,
and remove the unnecessary symlinking.
(See 4b2ff65a1f for similar test-data cleanup).
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[thuth: Fix conflict in MAINTAINERS]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This automatically removes the TPM backends from the
binary altogether if no front-ends are selected.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apart from defconfig (which is a no-op),
allyesconfig/allnoconfig/randcondfig can be implemented simply by ignoring
the RHS of assignments and "default" statements. The RHS is replaced
respectively by "true", "false" or a random value.
However, allyesconfig and randconfig do not quite work, because all the
files for hw/ARCH/Kconfig are sourced and therefore you could end up
enabling some ARM boards in x86 or things like that. This is left for
future work, but I am leaving it in to help debugging minikconf itself.
allnoconfig mode is tied to a new configure option, --without-default-devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.
The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig. One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script. This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph API that allows to add/remove nodes and edges from the graph,
implementation of Depth First Search to discover the paths and basic unit
test to check correctness of the API.
Included also a main executable that takes care of starting the framework,
create the nodes, set the available drivers/machines, discover the path and
run tests.
graph.h provides the public API to manage the graph nodes/edges
graph_extra.h provides a more private API used successively by the gtest integration part
qos-test.c provides the main executable
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
[Paolo's changes compared to the Google Summer of Code submission:
* added subprocess to test options
* refactored object creation to support live migration tests
* removed driver .before callback (unused)
* removed test .after callbacks (replaced by GTest destruction queue)]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Python:
* introduce "python" directory with module namespace
* log QEMU launch command line on qemu.QEMUMachine
Acceptance Tests:
* initrd 4GiB+ test
* migration test
* multi vm support in test class
* bump Avocado version and drop "🥑 enable"
-----BEGIN PGP SIGNATURE-----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=dwff
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python queue, 2019-02-22
Python:
* introduce "python" directory with module namespace
* log QEMU launch command line on qemu.QEMUMachine
Acceptance Tests:
* initrd 4GiB+ test
* migration test
* multi vm support in test class
* bump Avocado version and drop "🥑 enable"
# gpg: Signature made Fri 22 Feb 2019 19:37:07 GMT
# gpg: using RSA key 657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
Acceptance tests: expect boot to extract 2GiB+ initrd with linux-v4.16
Acceptance tests: use linux-3.6 and set vm memory to 4GiB
tests.acceptance: adds simple migration test
tests.acceptance: adds multi vm capability for acceptance tests
scripts/qemu.py: log QEMU launch command line
Introduce a Python module structure
Acceptance tests: drop usage of "🥑 enable"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support to our configure and makefile machinery for building
our rST docs into HTML files.
Building the documentation now requires that sphinx-build is
available; this seems better than allowing half the docs to
be built if it is not present but having half of them missing.
(In particular it means that assuming that distros configured with
--enable-docs they'll get a helpful error from configure telling
them the new build dependency.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-10-peter.maydell@linaro.org
Message-id: 20190228145624.24885-10-peter.maydell@linaro.org
Use the "system" libslirp if its present or requested.
Else build with a static libslirp.a if slirp/ is checked
out ("internal") or a submodule ("git").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-7-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux hosts.
Misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJccBqMAAoJECgfDbjSjVRpvSEIAKYPRNdCBX/SSS/L/tmJS5Zt
8IyU/HW1YJ249vO+aT6z4Q3QPgqNC3KjXC3brx/WRoPZnRroen4rv2Kqnk6SayPa
a52d2ubXKWxb3swdG1CAVzFRhq/ABpgAPx0dr1JW+RXgo2lxpJ4GNYxKMosQTaPE
hRNeXl1XlcIK525kJhFH3Hlij9mTRuY6T7ydpPQd8dUq2dBRaL9RrzZRrkZxCy6l
gQPUqNzPhG0XXyOiJmwYyVX0zGzbYrMLrMQAor2SBIYmU+zv2eZGPJUYxoMTUMzt
YR0WCpvkvPITlAryaBoozAIDYVz8PxBRT1KRwpDal+2rzlm6o+veKDiF8R46gn0=
=GzUz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, cleanups, tests
Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux hosts.
Misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 22 Feb 2019 15:51:40 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (26 commits)
pci: Sanity test minimum downstream LNKSTA
hw/smbios: fix offset of type 3 sku field
pci: Move NVIDIA vendor id to the rest of ids
virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size
virtio-balloon: Use ram_block_discard_range() instead of raw madvise()
virtio-balloon: Rework ballon_page() interface
virtio-balloon: Corrections to address verification
virtio-balloon: Remove unnecessary MADV_WILLNEED on deflate
i386/kvm: ignore masked irqs when update msi routes
contrib/vhost-user-blk: fix the compilation issue
Revert "contrib/vhost-user-blk: fix the compilation issue"
pc-dimm: use same mechanism for [get|set]_addr
tests/data: introduce "uefi-boot-images" with the "bios-tables-test" ISOs
tests/uefi-test-tools: add build scripts
tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app
roms: build the EfiRom utility from the roms/edk2 submodule
roms: add the edk2 project as a git submodule
vhost-user-test: create a temporary directory per TestServer
vhost-user-test: small changes to init_hugepagefs
vhost-user-test: create a main loop per TestServer
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In case no sound hardware is present both alsa and sdl drivers
initialize successfully and throw errors later on, i.e. effectively
the automatic probing doesn't work. Drop them from the list of
default audio drivers for linux because of that.
Fixes: 6a48541873 audio: probe audio drivers by default
Buglink: https://bugs.launchpad.net/qemu/+bug/1816052
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: David Hildenbrand <david@redhat.com>
Message-id: 20190219124257.3001-1-kraxel@redhat.com
The 'qemu_acl' type was a previous non-QOM based attempt to provide an
authorization facility in QEMU. Because it is non-QOM based it cannot be
created via the command line and requires special monitor commands to
manipulate it.
The new QAuthZ subclasses provide a superset of the functionality in
qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor
commands are converted to use the new QAuthZSimple data type instead
in order to provide temporary backwards compatibility.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add an authorization backend that talks to PAM to check whether the user
identity is allowed. This only uses the PAM account validation facility,
which is essentially just a check to see if the provided username is permitted
access. It doesn't use the authentication or session parts of PAM, since
that's dealt with by the relevant part of QEMU (eg VNC server).
Consider starting QEMU with a VNC server and telling it to use TLS with
x509 client certificates and configuring it to use an PAM to validate
the x509 distinguished name. In this example we're telling it to use PAM
for the QAuthZ impl with a service name of "qemu-vnc"
$ qemu-system-x86_64 \
-object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\
endpoint=server,verify-peer=yes \
-object authz-pam,id=authz0,service=qemu-vnc \
-vnc :1,tls-creds=tls0,tls-authz=authz0
This requires an /etc/pam/qemu-vnc file to be created with the auth
rules. A very simple file based whitelist can be setup using
$ cat > /etc/pam/qemu-vnc <<EOF
account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow
EOF
The /etc/qemu/vnc.allow file simply contains one username per line. Any
username not in the file is denied. The usernames in this example are
the x509 distinguished name from the client's x509 cert.
$ cat > /etc/qemu/vnc.allow <<EOF
CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB
EOF
More interesting would be to configure PAM to use an LDAP backend, so
that the QEMU authorization check data can be centralized instead of
requiring each compute host to have file maintained.
The main limitation with this PAM module is that the rules apply to all
QEMU instances on the host. Setting up different rules per VM, would
require creating a separate PAM service name & config file for every
guest. An alternative approach for the future might be to not pass in
the plain username to PAM, but instead combine the VM name or UUID with
the username. This requires further consideration though.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This is a simple move of Python code that wraps common QEMU
functionality, and are used by a number of different tests
and scripts.
By treating that code as a real Python module, we can more easily:
* reuse code
* have a proper place for the module's own unittests
* apply a more consistent style
* generate documentation
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190206162901.19082-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Detect all invalid configurations (e.g. mingw32 with vhost-user,
non-Linux with vhost-kernel). As a collateral benefit, all vhost-kernel
backends can be now disabled if one wants to reduce the attack surface.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1543851204-41186-6-git-send-email-pbonzini@redhat.com>
Message-Id: <1550165756-21617-7-git-send-email-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This shows a preexisting bug: if a KVM target did not have virtio-net enabled,
it would fail with undefined symbols when vhost was enabled. This must now
be fixed, lest targets that have no virtio-net fail to compile.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1543851204-41186-5-git-send-email-pbonzini@redhat.com>
Message-Id: <1550165756-21617-6-git-send-email-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hw/net/vhost_net.c needs functions that are declared in net/vhost-user.c: the
vhost-user code is always compiled into QEMU, only the constructor
net_init_vhost_user is unreachable. Also, net/vhost-user.c needs functions
declared in hw/virtio/vhost-stub.c even if no virtio device exists.
Break this dependency. First, add a minimal version of net/vhost-user.c,
with no functionality and no dependency on vhost code. Second, #ifdef out
the calls back to net/vhost-user.c from hw/net/vhost_net.c.
While at it, this patch fixes the CONFIG_VHOST_NET_USE*D* typo.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1543851204-41186-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1550165756-21617-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcZZvnAAoJENSXKoln91plz6UH/iqtHfPhGEj6o4CGFIx/8Ru/
k7XU552LgTGvIA1aHt9+dHNYWW/JRl1CvmdeECeAN/yFkKSdDmruW6hLV78dV6Jy
8xnnYt8bQhMfMSCIlkGh+CxFF0BCRoPrtH64ZVgZ9AnN00E6hyFlTHAYJEk8ZlcM
ov05JYneKlZWYDcJnYaGX6T7s8ALcq2O6FDUS88J9AiN303yt+kmaEC2WEt+xju4
+xPPBIIg8nqd3MlrQ/shpFcCOTN0OLQ4V5mQYLvbL3HGTzeZ8eYBRdqQ2DXpW8M8
OOFGhJrmfBYEC/me0T7suZnzLLNGGYz2jQWLlHy32COIAJv6GcUylGd9TDbGGP8=
=Py0Z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-feb-14-2019' into staging
MIPS queue for February 14th, 2019
# gpg: Signature made Thu 14 Feb 2019 16:48:39 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-feb-14-2019:
tests/tcg: target/mips: Add tests for MSA logic instructions
tests/tcg: target/mips: Add wrappers for MSA logic instructions
tests/tcg: target/mips: Add tests for MSA interleave instructions
tests/tcg: target/mips: Add wrappers for MSA interleave instructions
tests/tcg: target/mips: Add tests for MSA bit counting instructions
tests/tcg: target/mips: Add wrappers for MSA bit counting instructions
tests/tcg: target/mips: Add a header with test utilities
tests/tcg: target/mips: Add a header with test inputs
tests/tcg: target/mips: Remove an unnecessary file
target/mips: introduce MTTCG-enabled builds
hw/mips_cpc: kick a VP when putting it into Run statewq
target/mips: hold BQL in mips_vpe_wake()
hw/mips_int: hold BQL for all interrupt requests
target/mips: reimplement SC instruction emulation and use cmpxchg
target/mips: compare virtual addresses in LL/SC sequence
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce MTTCG-enabled QEMU builds for mips32, mipsn32, and mips64.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The current check to test if usbfs support should be compiled or not
solely relies on the presence of <linux/usbdevice_fs.h>, without
actually checking that all definition used by Qemu are provided by
this header file.
With sufficiently old kernel headers, <linux/usbdevice_fs.h> may be
present, but some of the definitions needed by Qemu may not be
available.
This commit improves the check by building a small program that
actually tests whether the necessary definitions are available.
In addition, it fixes a bug where have_usbfs was set to "yes"
regardless of the result of the test.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190213211827.20300-1-thomas.petazzoni@bootlin.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We have now managed to eradicate all the places in the codebase
that triggered clang's -Waddress-of-packed-member warning. Remove
the compiler flag that exempted it from our usual -Werror policy.
This will prevent any new problematic code being added in future.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190208132112.31493-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The NetBSD support in Intel HAXM has beem merged upstream and is functional.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Message-Id: <20190207233704.29978-1-n54@gmx.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This looks like a leftover that was never implemented.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190207193605.25676-2-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
POSIX says that it is better to use &&/|| and two separate test
invocations than it is to try and use -a and -o (in fact, there
are some tests that are inherently ambiguous to parse if the
user passes in corner-case input like "(").
Since we cannot guarantee which shell runs configure, we cannot
rely on -o/-a always following bash's parser rules.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190205023937.18245-1-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The machine description we send is being (silently) thrown on the floor
by GDB and GDB silently uses the default machine description, because
the xml parse fails on <feature> nested within <feature>.
Changes to the xml in qemu source code have no effect.
In addition, the default machine description has fs_base, which fails to
be retrieved, which breaks the whole register window. Add it and the
other control registers.
Signed-off-by: Doug Gale <doug16k@gmail.com>
Message-Id: <20190124040457.2546-1-doug16k@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After this patch contrib/elf2dmp can be built for Windows x86 and x86_64
hosts by mingw.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-Id: <20181220012441.13694-7-viktor.prutyanov@phystech.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On Linux (and maybe some BSDs), we require libutil for the openpty()
function. However, this library is not available on some other systems, so
we currently use a fragile if-statement in the configure script to check
whether we need the library or not. Unfortunately, we also hard-coded a
"-lutil" in the tests/Makefile.include file, so this breaks the build on
Solaris, for example (see buglink below). To fix the issue, add the "-lutil"
to "libs_tools" in the configure script instead, then this gets properly
propagated to the tests, too.
And while we're at it, also replace the fragile if-statement in the confi-
gure script with a proper link-check for the availability of this function.
Buglink: https://bugs.launchpad.net/qemu/+bug/1777252
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When Xen is detected via pkg-config, it isn't necessary to modify
LDFLAGS as modifying libs_softmmu is enough.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Its last uses was removed by: 6d7c06c213
"Remove broken Xen PV domain builder".
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
SDL1.2 was deprecated in the 2.12.0 release with:
commit e52c6ba341
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Jan 15 14:25:33 2018 +0000
ui: deprecate use of SDL 1.2 in favour of 2.0 series
The SDL 2.0 release was made in Aug, 2013:
https://www.libsdl.org/release/
That will soon be 4 + 1/2 years ago, which is enough time to consider
the 2.0 series widely supported.
Thus we deprecate the SDL 1.2 support, which will allow us to delete it
in the last release of 2018. By this time, SDL 2.0 will be more than 5
years old.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180115142533.24585-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is thus able to be removed in the 3.1.0 release.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180822131554.3398-4-berrange@redhat.com>
[ kraxel: rebase ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 5f9b1e3506 remove the dependency between OpenGL and X11.
However the milkymist-tmu2 device do require X11.
When using SDL, the configure script sets need_x11=yes, so the X11
flags are populated to the makefiles.
When building without SDL, X11 is not pulled and populated, leading
to a link failure:
LINK lm32-softmmu/qemu-system-lm32
hw/lm32/milkymist.o: In function `milkymist_tmu2_create':
hw/lm32/milkymist-hw.h:114: undefined reference to `XOpenDisplay'
hw/lm32/milkymist-hw.h:140: undefined reference to `XFree'
hw/lm32/milkymist-hw.h:141: undefined reference to `XCloseDisplay'
hw/lm32/milkymist-hw.h:130: undefined reference to `XCloseDisplay'
../hw/display/milkymist-tmu2.o: In function `tmu2_glx_init':
hw/display/milkymist-tmu2.c:112: undefined reference to `XOpenDisplay'
hw/display/milkymist-tmu2.c:123: undefined reference to `XFree'
collect2: error: ld returned 1 exit status
gmake[1]: *** [Makefile:199: qemu-system-lm32] Error 1
Enforce the X11 dependency when the LM32 target is built.
This will allow us to build QEMU without SDL.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190130120005.23123-3-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On FreeBSD 11.2:
$ nbdkit memory size=1M --run './qemu-io -f raw -c "aio_write 0 512" $nbd'
Parsing error: non-numeric argument, or extraneous/unrecognized suffix -- aio_write
After main option parsing, we reinitialize optind so we can parse each
command. However reinitializing optind to 0 does not work on FreeBSD.
What happens when you do this is optind remains 0 after the option
parsing loop, and the result is we try to parse argv[optind] ==
argv[0] == "aio_write" as if it was the first parameter.
The FreeBSD manual page says:
In order to use getopt() to evaluate multiple sets of arguments, or to
evaluate a single set of arguments multiple times, the variable optreset
must be set to 1 before the second and each additional set of calls to
getopt(), and the variable optind must be reinitialized.
(From the rest of the man page it is clear that optind must be
reinitialized to 1).
The glibc man page says:
A program that scans multiple argument vectors, or rescans the same
vector more than once, and wants to make use of GNU extensions such as
'+' and '-' at the start of optstring, or changes the value of
POSIXLY_CORRECT between scans, must reinitialize getopt() by resetting
optind to 0, rather than the traditional value of 1. (Resetting to 0
forces the invocation of an internal initialization routine that
rechecks POSIXLY_CORRECT and checks for GNU extensions in optstring.)
This commit introduces an OS-portability function called
qemu_reset_optind which provides a way of resetting optind that works
on FreeBSD and platforms that use optreset, while keeping it the same
as now on other platforms.
Note that the qemu codebase sets optind in many other places, but in
those other places it's setting a local variable and not using getopt.
This change is only needed in places where we are using getopt and the
associated global variable optind.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20190118101114.11759-2-rjones@redhat.com
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add the drivers listed in audio_possible_drivers to audio_drv_list,
using the try-* variants. That way the probable drivers are compiled by
default if possible.
Additioal tweaks:
linux: reorder to: pa alsa sdl oss.
*bsd: drop pa.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190124112055.547-7-kraxel@redhat.com
For those audio drivers which can be probed (sdl, alsa, pulse) add a
try-$name variants. Unlike the variants without try- prefix they will
not error out on probe failure, the driver will be dropped from the list
instead. Mainly useful for the audio_drv_list default values.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190124112055.547-3-kraxel@redhat.com
Use pkg-config to probe for alsa and pulseaudio.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190124112055.547-2-kraxel@redhat.com
Different versions of GCC and Clang use different versions of the C standard.
This repeatedly caused problems already, e.g. with duplicated typedefs:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
or with for-loop variable initializers:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg00237.html
To avoid these problems, we should enforce the C language version to the
same level for all compilers. Since our minimum compiler versions is
GCC v4.8, our best option is "gnu99" for C code right now ("gnu17" is not
available there yet, and "gnu11" is marked as "experimental"), and "gnu++98"
for the few C++ code that we have in the repository.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Modern desktop environments can render icons at very large sizes,
especially with high DPI screens. Providing a 32x32 pixel bitmap is
nowhere near sufficient anymore.
When displayed in GNOME shell the QEMU icon looks awful, having been
scaled up to at least x4 its base size. This is compounded by the fact
that the BMP file doesn't do transparency, so while we've removed white
pixels, we still have anti-aliased nearly-white pixels which make the
logo look appalling on black backgrounds.
Loading a high resolution PNG icon addresses both problems, but requires
use of the extra SDL2_image library.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The icon associated with a GtkWindow is just a hint to window managers
and not all of them will honour it. Some will instead want to show the
icon listed by the .desktop file. The desktop file is located based on
the application ID, which is set using g_set_prgname. QEMU has not
historically provided a desktop file or set its app ID, so it got a
broken icon in GNOME shell, which is now fixed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QEMU currently installs logos to $prefix/share/qemu/ which means no GUI
toolkit or applications can find them by default.
The accepted standards for desktop applications declare that application
logos / icons should be installed under $prefix/share/icons, so use this
directory location.
Pre-rendered icons are provided at the standard sizes expected for GUI
applications, along with the scalable SVG, to ensure maximum portability.
The PNGs are rendered from the SVG using inkscape, however, this is not
wired up into the default make rules to avoid requiring inkscape as a
mandatory tool in build systems / developer workstations.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We want to build our s390-ccw bios with -march=z900 so that it also
works with the oldest s390x CPU that we support with TCG. However,
Clang on s390x does not support -march=z900 anymore, so we can not
use this compiler to build the s390-ccw bios. Thus add a proper test
to the configure script to see whether the compiler is usable.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1547470346-18416-1-git-send-email-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Some functionality is dependent on the Python version
detected/configured on configure. While it's possible to run the
Python version later and check for the version, doing it once is
preferable. Also, it's a relevant information to keep in build logs,
as the overall behavior of the build can be affected by it.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181109150710.31085-2-crosa@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- Various Travis updates
- "stable" SID snapshot for docker
- avoid :latest docker tags
- g_usleep fix for some tests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAlw8o9cACgkQ+9DbCVqe
KkSmMQf/TRnnbaf/SIrYpAA6yGcAJtEnAU8f/CH3idAkEPv3+UtTkdSHor1u3A2G
BJaplFhYTOL/BwjUl1sctGYa8jVR6e1SS2rLRtIG7d+DyvmpFJNx9gKEdSkAuwbk
BVNElqFfKCezQeM9IrjhzXd7InoW7PNQMrKRrMvuECddLc0Ds9CTvOSY1WUpOlDh
rTEjvVhPu8LdZkhie/0D+zAzv8++iUDdImd1w7m3ilVPtyMflhdtaQ1Qpv6M/ldW
cmbIIiGq2xsC126Piyq2gguCNV8nt/a8vGavkCCIXNZ07eWVRxoMuGzlvVBhX9qV
oll92Fs9R8ZBROz5qpt/Uqt1+rBjNg==
=XPd+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-140119-1' into staging
A bunch of fixes for testing:
- Various Travis updates
- "stable" SID snapshot for docker
- avoid :latest docker tags
- g_usleep fix for some tests
# gpg: Signature made Mon 14 Jan 2019 14:59:35 GMT
# gpg: using RSA key FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-next-140119-1: (21 commits)
Revert "tests: Disable qht-bench parallel test when using gprof"
tests: use g_usleep instead of rem = sleep(time)
tests/docker: remove SID_AGE test hack
tests/docker: update our Travis image
travis: bump to Xenial baseline
docker: Use a stable snapshot for Debian Sid
travis: remove matrix settings that duplicate global settings
travis: run tests in verbose mode
travis: stop using container based envs
travis: stop redefining the script commands
travis: use homebrew addon for MacOSX
travis: don't clone git submodules upfront
travis: standardize the syntax used for env variables
travis: define all the build matrix entries in one place
travis: add whitespace between each major section & matrix entry
tests: use in-place sed magic for enabling deb-src in travis image
tests: update Fedora i386 cross image to Fedora 29
tests: update Fedora dockerfile to use Fedora 29
tests: remove obsolete 'debian' dockerfile
tests: run ldconfig after installing extra software
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is broken since Xen 4.9 [1] and it will not build in Xen 4.12. Also,
it is not built by default since QEMU 2.6.
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-09/msg00313.html
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Travis CI jobs are failing because of test-qht-par when gprof is
enabled. Temporarily disable test-qht-par if gprof is enabled,
until we fix the bug.
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJcON8hAAoJECgHk2+YTcWmYLkP/RqdM4fBXXBrXHXrwGsoN6qo
7TtvjJj+8eS8tVNGiP82b1qUeajRpbcspYvqH/Zwr1yMnAAqNhVYOX5pv7awKBkU
jCgvmAD88ZBthaPqjuI0E0pWu8ZgK8SY09eEgwtu9wZ5LOwY+pbSiGJTezMKEeOa
mBWvFAOhtkPp6r7kQgprYrMtV34BEt2LSiAd0Li7k5ejzaBdqh1Lbf4kY8Wgn5+5
RtMoZ0iaD7INLX+qI9WNh7xTHEF3oUnCDZNynwl5qsyg3JNWhvkIqZCBtRp7cJQH
C9WSSF+xpNsyiyeQcJNHZPGBq2M4jdknVNIZZsGES+1bugRAe44lEGqmLZnSaH1o
/WFFKQmztqNzB8P5cLFFzImez9GPRVoiRNU//wPBUr99TFIhbAFdhFko50R4uFLe
H5l4LsGZVeNuECX8g9H2E+Q1ve0jRxICxhgkyelSZ6CFtNs5a9EMuwGDxrs458E9
WPSUlEwv+FkSBjaBxp1ghWkk9tFDCta+4/QM+1CR/SOylqHFgYQf1szOVvMuJRuf
xmmJ68Al9GKTE5Xb9nqxFaV0jWkuZg00Ofpp1kFlHTn9Q6bhhnp0piEEgr0nsWwZ
mUyfVfDsNkbaLsVcjQqEP1HDGHEu77zAo5EAkF9JXgMK1Lm9j23Mk0K/jC6T2ME4
ZmS0GhXF7/4XIkYMvaTl
=RksQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
Work around test-qht-par + gprof issues
Travis CI jobs are failing because of test-qht-par when gprof is
enabled. Temporarily disable test-qht-par if gprof is enabled,
until we fix the bug.
# gpg: Signature made Fri 11 Jan 2019 18:23:29 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request:
tests: Disable qht-bench parallel test when using gprof
configure: Let the TARGET_GPROF var use the regular 'y' for Yes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test is failing on the Travis CI [*] since some time now,
disable it until it get fixed.
[*] https://travis-ci.org/qemu/qemu/builds/474821674
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190103150951.17592-3-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
All other variables are set using 'y', which is what the rules.mak
functions expect to parse.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190103150951.17592-2-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This removes some clutter in compilation logging, and allows some
easier tweaking per compilation unit/CFLAGS overriding.
Note that we can't move those define in os-win32.h, since they must be
set before the first system headers are included.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181122110039.15972-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Looking at chardev/spice.c code, I realize compilation was broken for
a while with spice-server < 0.12.3. Let's bump required version
to 0.12.5, released May 19 2014, instead of adding more #ifdef.
(this patch combines changes from an early version and some of
Frediano "[PATCH 2/2] spice: Bump required spice-server version to
0.12.6")
According to repology, all the distros that are build target platforms
for QEMU include it:
RHEL-7: 0.14.0
Debian (Stretch): 0.12.8
Debian (Jessie): 0.12.5
FreeBSD (ports): 0.14.0
OpenSUSE Leap 15: 0.14.0
Ubuntu (Xenial): 0.12.6
Note that a previous version of this patch was bumping version to
0.12.6. Unfortunately, Debian Jessie (oldstable) is stuck with spice
server 0.12.5, and QEMU should keep building until after 2y of current
stable (Stretch), which will be around June 17th 2019. Qemu 4.1
should thus be free of bumping to spice-server 0.12.6 during 4.1
development cycle.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20181128155932.16171-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
SLOF receives a device tree and updates it with various properties
before switching to the guest kernel and QEMU is not aware of any changes
made by SLOF. Since there is no real RTAS (QEMU implements it), it makes
sense to pass the SLOF final device tree to QEMU to let it implement
RTAS related tasks better, such as PCI host bus adapter hotplug.
Specifially, now QEMU can find out the actual XICS phandle (for PHB
hotplug) and the RTAS linux,rtas-entry/base properties (for firmware
assisted NMI - FWNMI).
This stores the initial DT blob in the sPAPR machine and replaces it
in the KVMPPC_H_UPDATE_DT (new private hypercall) handler.
This adds an @update_dt_enabled machine property to allow backward
migration.
SLOF already has a hypercall since
https://github.com/aik/SLOF/commit/e6fc84652c9c0073f9183
This makes use of the new fdt_check_full() helper. In order to allow
the configure script to pick the correct DTC version, this adjusts
the DTC presense test.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
macOS provides pthread_setname_np that doesn't have thread id argument.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <52160afacecc5b109dc43a412fa3e74ddd6277fb.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- qcow2: Decompression worker threads
- dmg: lzfse compression support
- file-posix: Simplify delegation to worker thread
- Don't pass flags to bdrv_reopen_queue()
- iotests: make 235 work on s390 (and others)
-----BEGIN PGP SIGNATURE-----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=XKq9
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Decompression worker threads
- dmg: lzfse compression support
- file-posix: Simplify delegation to worker thread
- Don't pass flags to bdrv_reopen_queue()
- iotests: make 235 work on s390 (and others)
# gpg: Signature made Fri 14 Dec 2018 10:55:09 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (42 commits)
block/mirror: add missing coroutine_fn annotations
iotests: make 235 work on s390 (and others)
block: Assert that flags are up-to-date in bdrv_reopen_prepare()
block: Remove assertions from update_flags_from_options()
block: Stop passing flags to bdrv_reopen_queue_child()
block: Remove flags parameter from bdrv_reopen_queue()
block: Clean up reopen_backing_file() in block/replication.c
qemu-io: Put flag changes in the options QDict in reopen_f()
block: Drop bdrv_reopen()
block: Use bdrv_reopen_set_read_only() in the mirror driver
block: Use bdrv_reopen_set_read_only() in external_snapshot_commit()
block: Use bdrv_reopen_set_read_only() in qmp_change_backing_file()
block: Use bdrv_reopen_set_read_only() in stream_start/complete()
block: Use bdrv_reopen_set_read_only() in bdrv_commit()
block: Use bdrv_reopen_set_read_only() in commit_start/complete()
block: Use bdrv_reopen_set_read_only() in bdrv_backing_update_filename()
block: Add bdrv_reopen_set_read_only()
file-posix: Avoid aio_worker() for QEMU_AIO_IOCTL
file-posix: Switch to .bdrv_co_ioctl
file-posix: Remove paio_submit_co()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit includes the support to lzfse opensource library. With this
library dmg block driver can decompress images with this type of
compression inside.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we require at least GCC 4.8, we don't need this als workaround
for 4.6 and 4.7 anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since we have got a check for Clang >= 3.4 now, we do not need to
check for older Clang versions in the configure test for 128-bit ints
anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
So far we only had implicit requirements for the minimum compiler version,
e.g. we require at least GCC 4.1 for the support of atomics. However,
such old compiler versions are not tested anymore by the developers, so
they are not really supported anymore. Since we recently declared explicitly
what platforms we intend to support, we can also get more explicit on the
compiler version now. The supported distributions use the following version
of GCC:
RHEL-7: 4.8.5
Debian (Stretch): 6.3.0
Debian (Jessie): 4.8.4
OpenBSD (ports): 4.9.4
FreeBSD (ports): 8.2.0
OpenSUSE Leap 15: 7.3.1
Ubuntu (Xenial): 5.3.1
macOS (Homebrew): 8.2.0
So we can safely assume GCC 4.8 these days. For Clang, the situation is
a little bit more ambiguous, since it is sometimes not available in the
main distros but rather third party repositories. At least Debian Jessie
uses version 3.5, and EPEL7 for RHEL7 uses 3.4, so let's use 3.4 as
minimum Clang version now - we still can adjust this later if necessary.
Unfortunately Apple uses different version numbers for the Clang that is
included in their Xcode suite, so we need to check the version numbers
for Xcode separately. Xcode 5.1 seems to be the first one that has been
shipped with LLVM 3.4, so use this version as the minimum there.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
POSIX requires $PWD to be reliable, and we expect all
shells used by qemu scripts to be relatively close to
POSIX. Thus, it is smarter to avoid forking the pwd
executable for something that is already available in
the environment.
So replace it with the following:
sed -i 's/\(`pwd`\|\$(pwd)\)/$PWD/g' $(git grep -l pwd)
Then delete a pointless line assigning PWD to itself.
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-2-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, tweak a couple more files]
Signed-off-by: Eric Blake <eblake@redhat.com>
This adds configure options to control the following block drivers:
* Bochs
* Cloop
* Dmg
* Qcow (V1)
* Vdi
* Vvfat
* qed
* parallels
* sheepdog
Each of these defaults to being enabled.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20181107063644.2254-1-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
A few places in configure were doing ad-hoc calls to
the symlink function to set up symlinks from the build tree
back to the source tree. We have a loop that does this
already for all files and directories listed in the LINKS
environment variable; use that instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The FILES variable is used to accumulate a list of things to symlink
from the source tree into the build tree. These don't have to be
individual files; symlinking an entire directory of data files is
also fine. Rename it to something less confusing before we add a few
directories to it.
Improve the comment to clarify what DIRS and LINKS do and why
it's not a good idea to add things to LINKS with wildcarding.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently tests/hex-loader-check-data contains data files used
by the hexloader-test, and configure individually symlinks those
data files into the build directory using a wildcard.
Using a wildcard like this is a bad idea, because if a new
data file is added, nothing causes configure to be rerun,
and so no symlink is added for the new file. This can cause
tests to spuriously fail when they can't find their data.
Instead, it's better to symlink an entire directory of
data files. We already have such a directory: tests/data.
Move the data files from tests/hex-loader-check-data/ to
tests/data/hex-loader/, and remove the unnecessary symlinking.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently tests/acpi-test-data contains data files used by the
bios-tables-test, and configure individually symlinks those
data files into the build directory using a wildcard.
Using a wildcard like this is a bad idea, because if a new
data file is added, nothing causes configure to be rerun,
and so no symlink is added for the new file. This can cause
tests to spuriously fail when they can't find their data.
Instead, it's better to symlink an entire directory of
data files. We already have such a directory: tests/data.
Move the data files from tests/acpi-test-data/ to
tests/data/acpi/, and remove the unnecessary symlinking.
We can remove entirely the note in rebuild-expected-aml.sh
about copying any new data files, because now they will
be in the source directory, not the build directory, and
no copying is required.
(We can't just change the existing tests/acpi-test-data/
to being a symlinked directory, because if we did that and
a developer switched git branches from one after that change
to one before it then configure would end up trashing all
the test files by making them symlinks to themselves.
Changing their path avoids this annoyance.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* support for --retry-path option for recovering from communication
path failures
* support for serial/device name in guest-get-fsinfo for linux/w32
* support for freezing individual mount points in guest-fsfreeze-*
* fixes for unicode paths on w32, not-present vcpus in guest-get-vcpus,
buffer overflow in guest-get-fsinfo for w32, and other minor fixes
v3:
* remove redundant check for --static in configure
* correct authorship on "qga-win: add debugging information"
v2:
* set libudev=off in configure for static builds
-----BEGIN PGP SIGNATURE-----
iQFOBAABCgA4FiEEzqzJ4VU066u4LT+gM1PJzvEItYQFAlvZuKYaHG1kcm90aEBs
aW51eC52bmV0LmlibS5jb20ACgkQM1PJzvEItYT4Agf+NdHTXor+hT8A8D/Tk2bf
3lU3F/PsdS+jY19IPrvXzBAZ2Hh96rHPRceTJKw4AbUHtTN6mYK2Hz1FQw5Pauya
u3rmqZfW4P4noyeLgHR3bnVJ5729lJEtJ2DBKIbX3fYpYCVAvUubZesL/dSnFUhf
DdMvYXaZl3O943E+RgheM/y1SxYr4lB69Nrk6SMtg0jxGYWJt594JttJRJ97ShUv
6Y4NPZev5caUy+0ozSJopi92TEh2oIe71pJ97Ap0quKI3ENSYgc2OylnGnxUzJZl
FdAs994WtEZJeTUaBxrMGytl3TQzosMEtPMhXZJn1P0Odyx0ziQCQy+zVbo5+XPY
vQ==
=drMH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2018-10-30-v3-tag' into staging
qemu-ga patch queue for soft-freeze
* support for --retry-path option for recovering from communication
path failures
* support for serial/device name in guest-get-fsinfo for linux/w32
* support for freezing individual mount points in guest-fsfreeze-*
* fixes for unicode paths on w32, not-present vcpus in guest-get-vcpus,
buffer overflow in guest-get-fsinfo for w32, and other minor fixes
v3:
* remove redundant check for --static in configure
* correct authorship on "qga-win: add debugging information"
v2:
* set libudev=off in configure for static builds
# gpg: Signature made Wed 31 Oct 2018 14:13:58 GMT
# gpg: using RSA key 3353C9CEF108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg: aka "Michael Roth <mdroth@utexas.edu>"
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
# Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584
* remotes/mdroth/tags/qga-pull-2018-10-30-v3-tag: (24 commits)
qga-win: changing --retry-path option behavior
qga-win: report specific error when failing to open channel
qga-win: install service with --retry-path set by default
qga: add --retry-path option for re-initializing channel on failure
qga: move w32 service handling out of run_agent()
qga: hang GAConfig/socket_activation off of GAState global
qga: group agent init/cleanup init separate routines
qga: fix an off-by-one issue
qga-win: demystify namespace stripping
qga-win: return disk device in guest-get-fsinfo
qga-win: handle multi-disk volumes
qga-win: refactor disk info
qga-win: report disk serial number
qga-win: refactor disk properties (bus)
qga-win: add debugging information
build: rename CONFIG_QGA_NTDDDISK to CONFIG_QGA_NTDDSCSI
qga-win: fsinfo: pci-info: allow partial info
qga-win: prevent crash when executing fsinfo command
qga: linux: return disk device in guest-get-fsinfo
qga: linux: report disk serial number
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There was inconsistency between commits:
50cbebb9a3 configure: add configure check for ntdddisk.h
a3ef3b2272 qga: added bus type and disk location path
The first commit added #define CONFIG_QGA_NTDDDISK but the second commit
expected the name to be CONFIG_QGA_NTDDSCSI. As a result the code in
second patch was never used.
Renaming the option to CONFIG_QGA_NTDDSCSI to match the name of header
file that is being checked for.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Sameeh Jubran <sjubran@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
-----BEGIN PGP SIGNATURE-----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=sHPv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging
QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
# gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request:
milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report
ppc: move at24c to its own CONFIG_ symbol
hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro
hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro
tests/bios-tables-test: Remove an useless cast
xen: Use the PCI_DEVICE macro
qobject: Catch another straggler for use of qdict_put_str()
configure: Support pkg-config for zlib
tests: Fix typos in comments and help message (found by codespell)
cpu.h: fix a typo in comment
linux-user: fix comment s/atomic_write/atomic_set/
qemu-iotests: make 218 executable
scripts/qemu.py: remove trailing quotes on docstring
scripts/decodetree.py: remove unused imports
docs/devel/testing.rst: add missing newlines after code block
qemu-iotests: fix filename containing checks
tests/tcg/README: fix location for lm32 tests
memory.h: fix typos in comments
vga_int: remove unused function protype
configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is needed for builds with the mingw64-* packages from Cygwin,
but also works for Linux.
Move the zlib test also more to the end because users should
get information on the really important missing packages
(which also require zlib) first.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180712192603.11599-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add disassembler support for nanoMIPS.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Matthew Fortune <matthew.fortune@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
The configure script detects if the compiler has AVX2 support and
automatically sets avx2_opt="yes" which in turn defines CONFIG_AVX2_OPT.
There is no way of explicitly overriding this setting so this commit adds
two command-line options: --enable-avx2 and --disable-avx2.
The default behaviour, when no option is specified, is to maintain the
current behaviour and enable AVX2 if the compiler supports it.
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Reviewed-by: Darren Kenny <Darren.Kenny@oracle.com>
Reviewed-by: Mark Kanda <Mark.Kanda@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- request bflt support in configure;
- implement custom linux-user/xtensa/target_flat.h that doesn't put envp
on stack;
- fix #include "target_flat.h" in flatload.c so that it first search for
arch-customized version of the header.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
nettle 2.7.1 was released in 2013 and all the distros that are build
target platforms for QEMU [1] include it:
RHEL-7: 2.7.1
Debian (Stretch): 3.3
Debian (Jessie): 2.7.1
OpenBSD (ports): 3.4
FreeBSD (ports): 3.4
OpenSUSE Leap 15: 3.4
Ubuntu (Xenial): 3.2
macOS (Homebrew): 3.4
Based on this, it is reasonable to require nettle >= 2.7.1 in QEMU
which allows for some conditional version checks in the code to be
removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In preparation for adding user mode emulation support for the
Linux usbfs interface, check for its kernel header.
Signed-off-by: Cortland Tölva <cst@tolva.net>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20181008163521.17341-2-cst@tolva.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
libgcrypt 1.5.0 was released in 2011 and all the distros that are build
target platforms for QEMU [1] include it:
RHEL-7: 1.5.3
Debian (Stretch): 1.7.6
Debian (Jessie): 1.6.3
OpenBSD (ports): 1.8.2
FreeBSD (ports): 1.8.3
OpenSUSE Leap 15: 1.8.2
Ubuntu (Xenial): 1.6.5
macOS (Homebrew): 1.8.3
Based on this, it is reasonable to require libgcrypt >= 1.5.0 in QEMU
which allows for some conditional version checks in the code to be
removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
gnutls 3.0.0 was released in 2011 and all the distros that are build
target platforms for QEMU [1] include it:
RHEL-7: 3.1.18
Debian (Stretch): 3.5.8
Debian (Jessie): 3.3.8
OpenBSD (ports): 3.5.18
FreeBSD (ports): 3.5.18
OpenSUSE Leap 15: 3.6.2
Ubuntu (Xenial): 3.4.10
macOS (Homebrew): 3.5.19
Based on this, it is reasonable to require gnutls >= 3.1.18 in QEMU
which allows for all conditional version checks in the code to be
removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
GCC7+ will no longer advertise support for 16-byte __atomic operations
if only cmpxchg is supported, as for x86_64. Fortunately, x86_64 still
has support for __sync_compare_and_swap_16 and we can make use of that.
AArch64 does not have, nor ever has had such support, so open-code it.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This should have been removed as part of commit
692fbdf9f4.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Per supported platforms doc[1], the various min GTK3 on relevant distros is:
RHEL-7.0: 3.8.8
RHEL-7.2: 3.14.13
RHEL-7.4: 3.22.10
RHEL-7.5: 3.22.26
Debian (Stretch): 3.22.11
Debian (Jessie): 3.14.5
OpenBSD (Ports): 3.22.30
FreeBSD (Ports): 3.22.29
OpenSUSE Leap 15: 3.22.30
SLE12-SP2: Unknown
Ubuntu (Xenial): 3.18.9
macOS (Homebrew): 3.22.30
This suggests that a minimum GTK3 of 3.14.0 is a reasonable target,
as users are unlikely to be stuck on RHEL-7.0/7.1 still
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180822131554.3398-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GTK2 was deprecated in the 2.12.0 release with:
commit b7715af2b3
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Tue Dec 12 11:34:40 2017 +0000
ui: deprecate use of GTK 2.x in favour of 3.x series
The GTK 3.0 release was made in Feb, 2011:
https://blog.gtk.org/2011/02/10/gtk-3-0-released/
That will soon be 7 years ago, which is enough time to consider
the 3.x series widely supported.
Thus we deprecate the GTK 2.x support, which will allow us to
delete it in the last release of 2018. By this time, GTK 3.x
will be almost 8 years old.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171212113440.16483-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is thus able to be removed in the 3.1.0 release.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180822131554.3398-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
By leveraging berkeley's softfloat and testfloat.
With this we get decent coverage of softfloat.c:
$ ./fp-test -r even: 67.22% coverage
$ ./fp-test -r all: 73.11% coverage
Note that we do not yet test parts of softfloat.c that aren't
in the original softfloat library, namely:
- denormal inputs
- *_to_int16/uint16 conversions
- scalbn for fixed point
- muladd variants
- min/max
- exp2
- log2
- float*_compare (except float16_compare)
Signed-off-by: Emilio G. Cota <cota@braap.org>
[rth: Add the new modules to git_submodules.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
elf2dmp is a converter from ELF dump (produced by 'dump-guest-memory') to
Windows MEMORY.DMP format (also know as 'Complete Memory Dump') which can be
opened in WinDbg.
This tool can help if VMCoreInfo device/driver is absent in Windows VM and
'dump-guest-memory -w' is not available but dump can be created in ELF format.
The tool works as follows:
1. Determine the system paging root looking at GS_BASE or KERNEL_GS_BASE
to locate the PRCB structure and finds the kernel CR3 nearby if QEMU CPU
state CR3 is not suitable.
2. Find an address within the kernel image by dereferencing the first
IDT entry and scans virtual memory upwards until the start of the
kernel.
3. Download a PDB matching the kernel from the Microsoft symbol store,
and figure out the layout of certain relevant structures necessary for
the dump.
4. Populate the corresponding structures in the memory image and create
the appropriate dump header.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com>
Message-Id: <1535546488-30208-3-git-send-email-viktor.prutyanov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The config.status script is auto-generated by configure upon
completion. The intention is that config.status can be later invoked by
the developer directly, or by make indirectly, to re-detect the same
environment that configure originally used.
The current config.status script, however, only contains a record of the
command line arguments to configure. Various environment variables have
an effect on what configure will find. In particular PKG_CONFIG_LIBDIR &
PKG_CONFIG_PATH vars will affect what libraries pkg-config finds. The
PATH var will affect what toolchain binaries and XXXX-config scripts are
found. The LD_LIBRARY_PATH var will affect what libraries are
found. Most commands have env variables that will override the name/path
of the default version configure finds.
All these key env variables should be recorded in the config.status script.
Autoconf would also preserve CFLAGS, LDFLAGS, LIBS, CPPFLAGS, but QEMU
deals with those differently, expecting extra flags to be set using
configure args, rather than env variables. At the end of the script we
also don't have the original values of those env vars, as we modify them
during configure.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180904123603.10016-1-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
EDID is a metadata format to describe monitors. On physical hardware
the monitor has an eeprom with that data block which can be read over
i2c bus.
On a linux system you can usually find the EDID data block in
/sys/class/drm/$card/$connector/edid. xorg ships a edid-decode utility
which you can use to turn the blob into readable form.
I think it would be a good idea to use EDID for virtual displays too.
Needs changes in both qemu and guest kms drivers. This patch is the
first step, it adds an generator for EDID blobs to qemu. Comes with a
qemu-edid test tool included.
With EDID we can pass more information to the guest. Names and serial
numbers, so the guests display configuration has no boring "Unknown
Monitor". List of video modes. Display resolution, pretty important
in case we want add HiDPI support some day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-2-kraxel@redhat.com
There is no known available OS for ppc around anymore that uses page
sizes below 4k, so it does not make much sense that we keep wasting
our time on building and testing the ppcemb-softmmu target. It has
been deprecated since two releases, and nobody complained, so let's
remove this now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The check should be unnecessary since commit
e7b3af8159 "glib: bump min required glib
library version to 2.40".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180730153639.26466-1-marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following patch is going to require TSYNC, which is only available
since libseccomp 2.2.0.
libseccomp 2.2.0 was released February 12, 2015.
According to repology, libseccomp version in different distros:
RHEL-7: 2.3.1
Debian (Stretch): 2.3.1
OpenSUSE Leap 15: 2.3.2
Ubuntu (Xenial): 2.3.1
This will drop support for -sandbox on:
Debian (Jessie): 2.1.1 (but 2.2.3 in backports)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
After commit b3f1c8c413 "qemu-pr-helper: use new
libmultipath API", QEMU started using new libmultipath API, which is not
available on CentOS 7.x.
This fixes that by probing the new libmultipath API in configure. If it fails,
then try probing the old API. If it fails, then consider libmultipath not
available.
With this, configure script defines CONFIG_MPATH_NEW_API that is used in
scsi/qemu-pr-helper.c to use the new libmultipath API.
Fixes: b3f1c8c413
BugLink: https://bugs.launchpad.net/qemu/+bug/1786343
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Message-Id: <20180810141116.24016-1-muriloo@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This includes nvdimm persistence fixes queued before the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbepoTAAoJECgfDbjSjVRpLioH/3BPps8FLh4x2gZSq3B+u72O
RYUA3I3TilEGyc9yf8o7e1Hf+pQAJBEmulcnKxXFVWZIJ1GVLPt4NZCMQGiPDnJL
+RCT/Q64PUy09hRjddAasikrvXa4YOsRgBgJJToO7v9PSQSaU3fC7O3hNea7KcF/
C4SSqkUgxyDhCCYHHblpKxFz/wtwy4ZaCGSdozIdmKNPJ6/ye8wOQ1Mq9e1Mwp18
S6ilJub5IwB6aM2KVMmX4AFomF4u2cn153ts8fI+Dyo4/NE6P4+viDlz3BOBKdzm
kmd49h6/n4Lenoo4oI1yNHSuIJJTVfvnoLu6rG7mPbQKgxNd1uN4KuUIygU5PCY=
=Xcaj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc: fixes
This includes nvdimm persistence fixes queued before the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 20 Aug 2018 11:38:11 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
migration/ram: ensure write persistence on loading all data to PMEM.
migration/ram: Add check and info message to nvdimm post copy.
mem/nvdimm: ensure write persistence to PMEM in label emulation
hostmem-file: add the 'pmem' option
configure: add libpmem support
memory, exec: switch file ram allocation functions to 'flags' parameters
memory, exec: Expose all memory block related flags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In some BSD systems RDMA migration is possible while
the pvrdma device can't be used because the mremap system call
is missing.
Reported-by: Rebecca Cran <rebecca@bluestop.org>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180816151637.24553-1-marcel.apfelbaum@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
'test.hex' file is a memory test pattern stored in Hexadecimal Object
Format. It loads at 0x10000 in RAM and contains values from 0 through
255.
The test case verifies that the expected memory test pattern was loaded.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Steffen Gortz <qemu.ml@steffen-goertz.de>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMM: changed qtest_startf() to qtest_initf() to work with
current master after the refactoring in commit 88b988c895]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a pair of configure options --{enable,disable}-libpmem to control
whether QEMU is compiled with PMDK libpmem [1].
QEMU may write to the host persistent memory (e.g. in vNVDIMM label
emulation and live migration), so it must take the proper operations
to ensure the persistence of its own writes. Depending on the CPU
models and available instructions, the optimal operation can vary [2].
PMDK libpmem have already implemented those operations on multiple CPU
models (x86 and ARM) and the logic to select the optimal ones, so QEMU
can just use libpmem rather than re-implement them.
Libpem is a part of PMDK project(formerly known as NMVL).
The project's home page is: http://pmem.io/pmdk/
And the project's repository is: https://github.com/pmem/pmdk/
For more information about libpmem APIs, you can refer to the comments
in source code of: pmdk/src/libpmem/pmem.c, begin at line 33.
Signed-off-by: Junyan He <junyan.he@intel.com>
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 208ecb3e1a. This was
causing problems by making DEF_TARGET_LIST pointless and having to
jump through hoops to build on mingw with a dully enabled config.
This includes a change to fix the per-guest TCG test probe which was
added after 208ecb3 and used TARGET_LIST.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Opengl support brings up libdrm. But actually nothing uses this library
or includes any of its headers. Just remove checking for it from configure.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180630165448.30795-1-mjt@msgid.tls.msk.ru
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The "git archive" feature creates tarballs which are missing all
submodule content. GitHub unhelpfully provides users with "Download"
links that claim to give them valid source release tarballs. These
GitHub archives will not be buildable as they are created by the
"git archive" feature and so are missing content. The user gets
unhelpful messages from make such as:
fatal error: ui/input-keymap-atset1-to-qcode.c: No such file or directory
By adding a sanity check we can give users an informative message about
what they've done wrong.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180418171151.5263-1-berrange@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
soft-freeze, but I'd like these preparatory patches to be merged anyway.
-----BEGIN PGP SIGNATURE-----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=vVJr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
The Darwin host support still needs some more work. It won't make it for
soft-freeze, but I'd like these preparatory patches to be merged anyway.
# gpg: Signature made Fri 29 Jun 2018 11:39:04 BST
# gpg: using RSA key 71D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Gregory Kurz <gregory.kurz@free.fr>"
# gpg: aka "[jpeg image of size 3330]"
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3 4910 71D4 D5E5 822F 73D6
* remotes/gkurz/tags/for-upstream:
9p: darwin: Explicitly cast comparisons of mode_t with -1
cutils: Provide strchrnul
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This updates the minimum required glib version to 2.40
-----BEGIN PGP SIGNATURE-----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=8tKK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/min-glib-pull-request' into staging
glib: update the min required version
This updates the minimum required glib version to 2.40
# gpg: Signature made Fri 29 Jun 2018 12:24:58 BST
# gpg: using RSA key BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/min-glib-pull-request:
glib: enforce the minimum required version and warn about old APIs
glib: bump min required glib library version to 2.40
util: remove redundant include of glib.h and add osdep.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Per supported platforms doc[1], the various min glib on relevant distros is:
RHEL-7: 2.50.3
Debian (Stretch): 2.50.3
Debian (Jessie): 2.42.1
OpenBSD (Ports): 2.54.3
FreeBSD (Ports): 2.50.3
OpenSUSE Leap 15: 2.54.3
SLE12-SP2: 2.48.2
Ubuntu (Xenial): 2.48.0
macOS (Homebrew): 2.56.0
This suggests that a minimum glib of 2.42 is a reasonable target.
The GLibC compile farm, however, uses Ubuntu 14.04 (Trusty) which only
has glib 2.40.0, and this is needed for testing during merge. Thus an
exception is made to the documented platform support policy to allow for
all three current LTS releases to be supported.
Docker jobs that not longer satisfy this new min version are removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
strchrnul is a GNU extension and thus unavailable on a number of targets.
In the review for a commit removing strchrnul from 9p, I was asked to
create a qemu_strchrnul helper to factor out this functionality.
Do so, and use it in a number of other places in the code base that inlined
the replacement pattern in a place where strchrnul could be used.
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180425025459.5258-5-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have had some tracing tools for mutex but it's not easy to use them
for e.g. dead locks. Let's provide "--enable-debug-mutex" parameter
when configure to allow QemuMutex to store the last owner that took
specific lock. It will be easy to use this tool to debug deadlocks
since we can directly know who took the lock then as long as we can have
a debugger attached to the process.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180425025459.5258-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can build tests for the host system with the compiler that we have
selected.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
As an individual compiler may be able to support several targets with
the appropriate flags we need to expose this to the user as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Also dont assume x86_64 compiler can build i386 binaries.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This allows us to specify cross compilers for our guests. This is
useful for building test images/programs. Currently we re-run the
compile test for each target. I couldn't think of a way to cache the
value for a given arch without getting messier configure code.
The cross compiler for the guest is visible to each target as
CROSS_CC_GUEST in config-target.mak. This is quoted to handle the case
of --cc="ccache gcc".
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Currently to run Avocado acceptance tests in an out-of-tree
build directory, we need to use the full path to the test:
build_dir$ avocado run /full/path/to/sources/qemu/tests/acceptance/boot_linux_console.py
This patch adds a symlink in the build tree to simplify the
tests invocation, allowing the same command than in in-tree builds:
build_dir$ avocado run tests/acceptance/boot_linux_console.py
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180612173437.14462-1-f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
All of the supported build platforms documented in qemu-doc.texi
should already support Python 2.7.
Removing support for Python 2.6 will allow us to remove some
compatibility modules we carry in the QEMU tree:
* scripts/argparse.py
* scripts/ordereddict.py
Python 2.6 is also not receiving bug fixes upstream and is not
supported by pylint, which makes it harder to keep the code
compatible with both Python 2 and Python 3.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180608143026.20167-1-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To be more accurate on its purpose and make code that looks for a certain
target out of this variable more readable.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This tests for a working docker installation without sudo and sets up
config-host.mak accordingly. This will be useful from cross compiling
things in the future.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* Copy offloading for qemu-img convert (iSCSI, raw, and qcow2)
If the underlying storage supports copy offloading, qemu-img convert will
use it instead of performing reads and writes. This avoids data transfers
and thus frees up storage bandwidth for other purposes. SCSI EXTENDED COPY
and Linux copy_file_range(2) are used to implement this optimization.
* Drop spurious "WARNING: I\/O thread spun for 1000 iterations" warning
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbFSBoAAoJEJykq7OBq3PISpEIAIcMao4/rzinAWXzS+ncK9LO
6FtRVpgutpHaWX2ayySaz5n2CdR3cNMrpCI7sjY2Kw0lrdkqxPgl5n0SWD+VCl4W
7+JLz/uF0iUV8X+99e7WGAjZbm9LSlxgn5AQKfrrwyPf0ZfzoYQ5nBMcQ6xjEeQP
48j2WqJqN9/u8RBD07o11yn0+CE5g56/f12xVjR5ASVodzsAmcZ2OQRMQbM01isU
1mBekJQkDxJkt5l13Rql8+t+vWz8/9BEW2c/eIDKvoayMqYJpdfKv4DqLloIuHnc
3RkquA0zUuKtl7xEnEkH/We7fi4QPGW/vyBN7ychS/zKzZFQrXmwqrAuFSw3dKU=
=vZp+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
* Copy offloading for qemu-img convert (iSCSI, raw, and qcow2)
If the underlying storage supports copy offloading, qemu-img convert will
use it instead of performing reads and writes. This avoids data transfers
and thus frees up storage bandwidth for other purposes. SCSI EXTENDED COPY
and Linux copy_file_range(2) are used to implement this optimization.
* Drop spurious "WARNING: I\/O thread spun for 1000 iterations" warning
# gpg: Signature made Mon 04 Jun 2018 12:20:08 BST
# gpg: using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
main-loop: drop spin_counter
qemu-img: Convert with copy offloading
block-backend: Add blk_co_copy_range
iscsi: Implement copy offloading
iscsi: Create and use iscsi_co_wait_for_task
iscsi: Query and save device designator when opening
file-posix: Implement bdrv_co_copy_range
qcow2: Implement copy offloading
raw: Implement copy offloading
raw: Check byte range uniformly
block: Introduce API for copy offloading
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With copy_file_range(2), we can implement the bdrv_co_copy_range
semantics.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180601092648.24614-6-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We're currently linking against import libraries of the WHP DLLs.
By dynamically loading the libraries, we ensure that QEMU will work
on previous Windows versions, where the WHP DLLs will be missing
(assuming that WHP is not requested).
Also, we're simplifying the build process, as we no longer require
the import libraries.
Signed-off-by: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Signed-off-by: Lucian Petrut <lpetrut@cloudbasesolutions.com>
Message-Id: <1526405722-10887-2-git-send-email-lpetrut@cloudbasesolutions.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Xen 4.11 has a new API to directly map guest resources. Among the resources
that can be mapped using this API are ioreq pages.
This patch modifies QEMU to attempt to use the new API should it exist,
falling back to the previous mechanism if it is unavailable.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Setup MicroBlaze builds for 64bit addressing.
No functional change since the translator does not yet
emit 64bit addresses.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
* dtc configure fixes
* MemoryRegionCache second try
* Deprecated option removal
* add support for Hyper-V reenlightenment MSRs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJa9Y2qAAoJEL/70l94x66Df8EIAI4pi+zf1mTlH0Koi+oqOg+d
geBC6N9IA+n1p90XERnPbuiT19NjON2R1Z907SbzDkijxdNRoYUoQf7Z+ZBTENjn
dYsVvgLYzajGLWWtJetPPaNFAqeF2z8B3lbVQnGVLzH5pQQ2NS1NJsvXQA2LslLs
2ll1CJ2EEBhayoBSbHK+0cY85f+DUgK/T1imIV2T/rwcef9Rw218nvPfGhPBSoL6
tI2xIOxz8bBOvZNg2wdxpaoPuDipBFu6koVVbaGSgXORg8k5CEcKNxInztufdELW
KZK5ORa3T0uqu5T/GGPAfm/NbYVQ4aTB5mddshsXtKbBhnbSfRYvpVsR4kQB/Hc=
=oC1r
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Don't silently truncate extremely long words in the command line
* dtc configure fixes
* MemoryRegionCache second try
* Deprecated option removal
* add support for Hyper-V reenlightenment MSRs
# gpg: Signature made Fri 11 May 2018 13:33:46 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (29 commits)
rename included C files to foo.inc.c, remove osdep.h
pc-dimm: fix error messages if no slots were defined
build: Silence dtc directory creation
shippable: Remove Debian 8 libfdt kludge
configure: Display if libfdt is from system or git
configure: Really use local libfdt if the system one is too old
i386/kvm: add support for Hyper-V reenlightenment MSRs
qemu-doc: provide details of supported build platforms
qemu-options: Remove deprecated -no-kvm-irqchip
qemu-options: Remove deprecated -no-kvm-pit-reinjection
qemu-options: Bail out on unsupported options instead of silently ignoring them
qemu-options: Remove remainders of the -tdf option
qemu-options: Mark -virtioconsole as deprecated
target/i386: sev: fix memory leaks
opts: don't silently truncate long option values
opts: don't silently truncate long parameter keys
accel: use g_strsplit for parsing accelerator names
update-linux-headers: drop hyperv.h
qemu-thread: always keep the posix wrapper layer
exec: reintroduce MemoryRegion caching
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The configure script outputs "yes" regardless which libfdt is used:
./configure
[...]
fdt support yes
Sometimes you can have both system and local git version available,
change the configure script to display which library got selected:
debian8$ dpkg-query --showformat='${Version}\n' --show libfdt-dev
1.4.0+dfsg-1
debian8$ ./configure
[...]
fdt support git
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180415230522.24404-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU requires libfdt version >= 1.4.2.
If the host has an older libfdt installed, the configure script will use
a (git cloned) local version.
Example with Debian 8:
$ dpkg-query --showformat='${Version}\n' --show libfdt-dev
1.4.0+dfsg-1
$ ./configure
[...]
fdt support yes # from git submodule 'dtc'
If this case occurs, the linker will have 2 different libfdt available in
the library search path. The default behavior is to search the system path
first, then the local path.
Even if the configure script noticed the libfdt is too old and clone a more
recent locally, when linking the system library is selected first, and the
link process eventually fails:
LINK mips64el-softmmu/qemu-system-mips64el
../hw/core/loader-fit.o: In function `load_fit':
/root/src/github.com/philmd/qemu/hw/core/loader-fit.c:278: undefined reference to `fdt_first_subnode'
/root/src/github.com/philmd/qemu/hw/core/loader-fit.c:286: undefined reference to `fdt_next_subnode'
/root/src/github.com/philmd/qemu/hw/core/loader-fit.c:277: undefined reference to `fdt_first_subnode'
collect2: error: ld returned 1 exit status
Makefile:201: recipe for target 'qemu-system-mips64el' failed
make[1]: *** [qemu-system-mips64el] Error 1
QEMU already uses a kludge to enforce local CFLAGS before system ones for
libpixman and libfdt, add a similar kludge for the LDFLAGS to enforce using
the local libfdt.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180415230522.24404-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
When compiling on a machine without libfdt installed the configure script
should try to get libfdt from the git or should die because otherwise
CONFIG_LIBFDT is not set and the build process end in an error in the link
phase.. eg:
hw/riscv/virt.o: In function `riscv_virt_board_init':
qemu/src/hw/riscv/virt.c:317: undefined reference to `qemu_fdt_setprop_cell'
qemu/src/hw/riscv/virt.c:319: undefined reference to `qemu_fdt_setprop_cell'
qemu/src/hw/riscv/virt.c:345: undefined reference to `qemu_fdt_dumpdtb'
collect2: error: ld returned 1 exit status
make[1]: *** [qemu-system-riscv64] Error 1
make: *** [subdir-riscv64-softmmu] Error 2
Cc: qemu-stable@nongnu.org
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Message-Id: <1525360636-18229-4-git-send-email-frederic.konrad@adacore.com>
Extend the list of recognized, but ignored options from rpms %configure
macro. This fixes build on hosts running SUSE Linux.
Cc: qemu-stable@nongnu.org
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Message-Id: <20180418075045.27393-1-olaf@aepfle.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When trying to build with latest libcacard-2.5.1, I hit the
following error:
In file included from hw/usb/ccid-card-passthru.c:12:0:
/usr/include/cacard/vscard_common.h:26:2: error: #warning "Only <libcacard.h> can be included directly" [-Werror=cpp]
#warning "Only <libcacard.h> can be included directly"
While it was fixed in libcacard upstream (so that individual
files can be included directly), it doesn't make much sense.
Let's switch to including the main libcacard.h and also require
at least libcacard-2.5.1 which introduced it. It's available
since late 2015.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 3c36db1dc0702763ebb7966cc27428ed67d43804.1522751624.git.mprivozn@redhat.com
[ kraxel: fix include path ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This makes it much easier to find a particular thing in config.log.
We have to use the ${BASH_LINENO[*]} syntax which is a syntax error in
other shells, so test what shell we are running and use eval.
The extra output is only printed if configure is run with bash. On
systems where /bin/sh is not bash, it is necessary to say bash
./configure to get the extra debug info in the log.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Kent R. Spillner <kspillner@acm.org>
CC: Janosch Frank <frankja@linux.vnet.ibm.com>
CC: Thomas Huth <thuth@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Xen unstable (to be in 4.11) has two new dmops, relocate_memory and
pin_memory_cacheattr. Use these to set up the VGA memory, replacing the
previous calls to libxc. This allows the VGA console to work properly
when QEMU is running restricted (-xen-domid-restrict).
Wrapper functions are provided to allow QEMU to work with older versions
of Xen.
Tweak the error handling while making this change:
* Report pin_memory_cacheattr errors.
* Report errors even when DEBUG_HVM is not set. This is useful for
trying to understand why VGA is not working, since otherwise it just
fails silently.
* Fix the return values when an error occurs. The functions now
consistently return -1 and set errno.
CC: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Xen libraries in 4.10 include a new xentoolcore library. This
contains the xentoolcore_restrict_all function which we are about to
want to use.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
SDL has the same problem as GTK that we might get warnings on SDL ABI
version even if SDL is disabled. Fix that by only probing SDL if SDL is
enabled. Also this should let configure be a little bit faster since we
don't really need to probe SDL stuff when it's off.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Daniel P. Berrange <berrange@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180410054034.20479-1-peterx@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We don't need to detect GTK ABI if GTK is disabled in general.
Otherwise we could get this warning (when host is installed with GTK ABI
version 2) even when configure with "--disable-gtk":
WARNING: Use of GTK 2.0 is deprecated and will be removed in
WARNING: future releases. Please switch to using GTK 3.0
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Fam Zheng <famz@redhat.com>
CC: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180409082323.29575-1-peterx@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We forgot to mention --with-git, --libexecdir and --with-pkgversion
so far.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1522163370-18544-1-git-send-email-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
configure tries to detect if the compiler
supports 16-byte vector operations.
As stated in the comment of the detection
program, there is a problem with the system
compiler on GCC on Centos 7.
This program doesn't actually detect the problem
with GCC on RHEL7 on PPC64LE (Red Hat 4.8.5-28).
This patch updates the test to look more like
it is in QEMU helpers, and now detects the problem.
The error reported is:
CC ppc64-softmmu/accel/tcg/tcg-runtime-gvec.o
..//accel/tcg/tcg-runtime-gvec.c: In function ‘helper_gvec_shl8i’:
../accel/tcg/tcg-runtime-gvec.c:558:26: internal compiler error: in emit_move_insn, at expr.c:3495
*(vec8 *)(d + i) = *(vec8 *)(a + i) << shift;
^
Fixes: db43267 "tcg: Add generic vector expanders"
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-id: 20180328133152.24623-1-lvivier@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a breaking change to WHvGetCapability to include the 'out'
WrittenSizeInBytes introduced in Windows Insider SDK 17110.
This specifies on return the safe length to read into the WHV_CAPABILITY
structure passed to the call.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1521039163-138-2-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Our rule right now is to use <> for external headers,
"" for internal ones. The idea was to avoid conflicts
between e.g. a system file named <trace.h> and an
internal one by the same name.
Unfortunately we use -I compiler flag so it does not
help: a system file doing #include <trace.h> will
still pick up ours first.
To fix, switch to -iquote which is supported by both
gcc and clang and only affects #include "" directives.
As a side effect, this catches any future uses of
#include <> for internal headers.
Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
- small cleanup for xtensa registers dumping (-d cpu);
- add support for debugging linux-user process with xtensa-linux-gdb
(as opposed to xtensa-elf-gdb), which can only access unprivileged
registers;
- enable MTTCG for target/xtensa;
- cleanup in linux-user/mmap area making sure that it works correctly
with limited 30-bit-wide user address space;
- import xtensa-specific definitions from the linux kernel,
conditionalize user-only/softmmu-only code and add handlers for
signals, exceptions, process/thread creation and core registers dumping.
-----BEGIN PGP SIGNATURE-----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=UCny
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xtensa/tags/20180316-xtensa' into staging
target/xtensa linux-user support.
- small cleanup for xtensa registers dumping (-d cpu);
- add support for debugging linux-user process with xtensa-linux-gdb
(as opposed to xtensa-elf-gdb), which can only access unprivileged
registers;
- enable MTTCG for target/xtensa;
- cleanup in linux-user/mmap area making sure that it works correctly
with limited 30-bit-wide user address space;
- import xtensa-specific definitions from the linux kernel,
conditionalize user-only/softmmu-only code and add handlers for
signals, exceptions, process/thread creation and core registers dumping.
# gpg: Signature made Fri 16 Mar 2018 16:46:19 GMT
# gpg: using RSA key 51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044
* remotes/xtensa/tags/20180316-xtensa:
MAINTAINERS: fix W: address for xtensa
qemu-binfmt-conf.sh: add qemu-xtensa
target/xtensa: add linux-user support
linux-user: drop unused target_msync function
linux-user: fix target_mprotect/target_munmap error return values
linux-user: fix assertion in shmdt
linux-user: fix mmap/munmap/mprotect/mremap/shmat
target/xtensa: support MTTCG
target/xtensa: use correct number of registers in gdbstub
target/xtensa: mark register windows in the dump
target/xtensa: dump correct physical registers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# linux-user/syscall.c
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
=UAgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
tcg: fix cpu_io_recompile
replay: update documentation
replay: save vmstate of the asynchronous events
replay: don't process async events when warping the clock
scripts/replay-dump.py: replay log dumper
replay: avoid recursive call of checkpoints
replay: check return values of fwrite
replay: push replay_mutex_lock up the call tree
replay: don't destroy mutex at exit
replay: make locking visible outside replay code
replay/replay-internal.c: track holding of replay_lock
replay/replay.c: bump REPLAY_VERSION again
replay: save prior value of the host clock
replay: added replay log format description
replay: fix save/load vm for non-empty queue
replay: fixed replay_enable_events
replay: fix processing async events
cpu-exec: fix exception_index handling
hw/i386/pc: Factor out the superio code
hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/i386-softmmu.mak
# default-configs/x86_64-softmmu.mak
- emit TCG barriers for MEMW, EXTW, S32RI and L32AI;
- do atomic_cmpxchg_i32 for S32C1I.
Cc: Emilio G. Cota <cota@braap.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Actually enable the global memory barriers if supported by the OS.
Because only recent versions of Linux include the support, they
are disabled by default. Note that it also has to be disabled
for QEMU to run under Wine.
Before this patch, rcutorture reports 85 ns/read for my machine,
after the patch it reports 12.5 ns/read. On the other hand updates
go from 50 *micro*seconds to 20 *milli*seconds.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 67a1de0d19 there is no space anymore between the
version number and the parentheses when running configure with
--with-pkgversion=foo :
$ qemu-system-s390x --version
QEMU emulator version 2.11.50(foo)
But the space is included when building without that option
when building from a git checkout:
$ qemu-system-s390x --version
QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty)
The same confusion exists with the "query-version" QMP command.
Let's fix this by introducing a proper QEMU_FULL_VERSION definition
that includes the space and parentheses, while the QEMU_PKGVERSION
should just cleanly contain the package version string itself.
Note that this also changes the behavior of the "query-version" QMP
command (the space and parentheses are not included there anymore),
but that's supposed to be OK since the strings there are not meant
to be parsed by other tools.
Fixes: 67a1de0d19
Buglink: https://bugs.launchpad.net/qemu/+bug/1673373
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As we want qemu symbols be exported to modules we should use the
gmodule-export-2.0 pkg-config instead of gmodule-2.0.
Cc: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180308085301.8875-2-kraxel@redhat.com
This patch disables the pragma diagnostic -Wunused-but-set-variable for
clang in util/coroutine-ucontext.c.
This in turn allows us to remove it from the configure check, so the
CONFIG_PRAGMA_DIAGNOSTIC_AVAILABLE will succeed for clang.
With that in place clang builds (linux) will use -Werror by default,
which breaks the build due to warning about unaligned struct members.
Just turning off this warning isn't a good idea as it indicates
portability problems. So make it a warning again, using
-Wno-error=address-of-packed-member. That way it doesn't break the
build but still shows up in the logs.
Now clang builds qemu without errors. Well, almost. There are some
left in the rdma code. Leaving that to the rdma people. All others can
use --disable-rdma to workarounds this.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20180309135945.20436-1-kraxel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This adds RISC-V into the build system enabling the following targets:
- riscv32-softmmu
- riscv64-softmmu
- riscv32-linux-user
- riscv64-linux-user
This adds defaults configs for RISC-V, enables the build for the RISC-V
CPU core, hardware, and Linux User Emulation. The 'qemu-binfmt-conf.sh'
script is updated to add the RISC-V ELF magic.
Expected checkpatch errors for consistency reasons:
ERROR: line over 90 characters
FILE: scripts/qemu-binfmt-conf.sh
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
Fixes an issue where the SDK that was releases had a different casing for the
*.h and *.lib files causing a build break if linked directly from Windows Kits.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1519665216-1078-2-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Justin Terry (VM) via Qemu-devel <qemu-devel@nongnu.org>
This reverts commit 906548689e.
Even with -Og, the debug experience is noticeably worse
because gdb shows a lot more "<optimised out>" variables and
function arguments.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since 218bb57dd7, the -fsanitize=address
check fails with:
config-temp/qemu-conf.c:3:20: error: integer overflow in expression [-Werror=overflow]
return INT32_MIN / -1;
Interestingly, UBSAN check doesn't produce a compile time warning.
Use a test that doesn't have compile time warnings, and make it
specific to UBSAN check.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180215212552.26997-2-marcandre.lureau@redhat.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This avoids a name clash for CONFIG_SDL, which is used by both sdl video
support and sdl audio support. It also more clear that this is a audio
driver configuration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-13-kraxel@redhat.com
Also drop curses libs from libs_softmmu. Add CURSES_{CFLAGS,LIBS}
variables so we can use them for linking the curses module.
Also make target/unicore32/helper.o depend on curses which uses curses
directly for some reason ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-12-kraxel@redhat.com
Also drop gtk and vte libs from libs_softmmu, so the libs are not
pulled in unless the gtk module actually gets loaded.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-11-kraxel@redhat.com
So remove x11 from pkg-config check and don't
add x11 cflags/libs to opengl cflags/libs.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-10-kraxel@redhat.com
Simplifies handling the X11 dependency,
also makes ui/Makefile.objs more readable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-9-kraxel@redhat.com
We used to generate first test and later QGA QAPI code into
qapi-generated/. Commit b93b63f574 moved the test code to tests/.
Commit 54c2e50205 moved the QGA code to qga/qapi-generated/. The
directory has been unused since.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-30-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add myself as an OpenBSD maintainer and add OpenBSD as maintained.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Message-id: 20180216164620.GA53727@humpty.home.comstyle.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This layer is composed of two sub-modules, backend and resource manager.
Backend sub-module is responsible for all the interaction with IB layers
such as ibverbs and umad (external libraries).
Resource manager is a collection of functions and structures to manage
RDMA resources such as QPs, CQs and MRs.
Reviewed-by: Dotan Barak <dotanb@mellanox.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Only EXTRA_LDFLAGS seems to be used during configure Xen checks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180208162343.30809-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for the presence of posix_memalign() in the configure script,
not using "defined(_POSIX_C_SOURCE) && !defined(__sun__)". This
lets qemu use posix_memalign() on NetBSD versions that have it,
instead of falling back to valloc() which is wasteful when the
required alignment is smaller than a page.
Signed-off-by: Andreas Gustafsson <gson@gson.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Even with --disable-git-update, ./configure tries updating the capstone
submodule instead of marking it "no"; this disables capstone submodule
if git update is disabled.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
- rework interrupt handling for tcg, smp is now considered non-experimental
- some general improvements in the flic
- improvements in the pci code, and wiring it up in tcg
- add PTFF subfunctions for multiple-epoch to the cpu model
- maintainership updates
- various other fixes and improvements
-----BEGIN PGP SIGNATURE-----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=/u33
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180209' into staging
s390x updates:
- rework interrupt handling for tcg, smp is now considered non-experimental
- some general improvements in the flic
- improvements in the pci code, and wiring it up in tcg
- add PTFF subfunctions for multiple-epoch to the cpu model
- maintainership updates
- various other fixes and improvements
# gpg: Signature made Fri 09 Feb 2018 09:04:34 GMT
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20180209: (29 commits)
MAINTAINERS: add David as additional tcg/s390 maintainer
MAINTAINERS: reorganize s390-ccw bios maintainership
MAINTAINERS: add myself as overall s390x maintainer
s390x/pci: use the right pal and pba in reg_ioat()
s390x/pci: fixup global refresh
s390x/pci: fixup the code walking IOMMU tables
s390x/cpumodel: model PTFF subfunctions for Multiple-epoch facility
s390x/cpumodel: allow zpci features in qemu model
s390x/tcg: wire up pci instructions
s390x/sclp: fix event mask handling
s390x/flic: cache the common flic class in a central function
s390x/kvm: cache the kvm flic in a central function
s390x/tcg: cache the qemu flic in a central function
configure: s390x supports mttcg now
s390x/tcg: remove SMP warning
s390x/tcg: STSI overhaul
s390x: fix size + content of STSI blocks
s390x/flic: optimize CPU wakeup for TCG
s390x/flic: implement qemu_s390_clear_io_flic()
s390x/tcg: implement TEST PENDING INTERRUPTION
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
s390x is ready. Most likely we are missing some pieces, but it should
already be in pretty good shape now.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In alpine docker image the qemu-system-s390x build is broken and
it throws this error:
qemu-system-s390x: Initialization of device s390-ipl failed: could not
load bootloader 's390-ccw.img'
The grep command of busybox uses regex. This fails on binary data
(e.g. stops on every \0), so it does not identify the string
BiGeNdIaN in the test case big/little. Therefore, it assumes
that the architecture is little endian.
This fix solves the grep problem by printing the content of
TMPO with strings
Signed-off-by: Alice Frosi <alice@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[some changes to patch description, add -a option to strings]
Message-Id: <20180130133828.77336-2-borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Introduces the configure support for the new Windows Hypervisor Platform that
allows for hypervisor acceleration from usermode components on the Windows
platform.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1516655269-1785-2-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It helps ASAN to detect more leaks on coroutine stacks, and to get rid
of some extra warnings.
Before:
tests/test-coroutine -p
/basic/lifecycle
/basic/lifecycle: ==20781==WARNING: ASan doesn't fully support
makecontext/swapcontext functions and may produce false positives in
some cases!
==20781==WARNING: ASan is ignoring requested __asan_handle_no_return:
stack top: 0x7ffcb184d000; bottom 0x7ff6c4cfd000; size: 0x0005ecb50000
(25446121472)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
OK
After:
tests/test-coroutine -p /basic/lifecycle
/basic/lifecycle: ==21110==WARNING: ASan doesn't fully support
makecontext/swapcontext functions and may produce false positives in
some cases!
OK
A similar work would need to be done for sigaltstack & windows fibers
to have similar coverage. Since ucontext is preferred, I didn't bother
checking the other coroutine implementations for now.
Update travis to fix the build with ASAN annotations.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180116151152.4040-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Typical slowdown introduced by AddressSanitizer is 2x.
UBSan shouldn't have much impact on runtime cost.
Enable it by default when --enable-debug, unless --disable-sanitizers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180116151152.4040-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180116134217.8725-11-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We dropped support for ia64 host CPUs in the 2.11 release (removing
the TCG backend for it, and advertising the support as being
completely removed in the changelog). However there are a few bits
and pieces of code still floating about. Remove those, too.
We can drop the check in configure for "ia64 or hppa host?"
entirely, because we don't support hppa hosts either any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1516897189-11035-1-git-send-email-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SDL 2.0 release was made in Aug, 2013:
https://www.libsdl.org/release/
That will soon be 4 + 1/2 years ago, which is enough time to consider
the 2.0 series widely supported.
Thus we deprecate the SDL 1.2 support, which will allow us to delete it
in the last release of 2018. By this time, SDL 2.0 will be more than 5
years old.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180115142533.24585-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This dependency is required for adequate Parallels images support.
Typically the disk consists of several images which are glued by
XML disk descriptor. Also XML hides inside several important parameters
which are not available in the image header.
The patch also adds clause to checkpatch.pl to understand libxml2 types.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Klim Kireev <klim.kireev@virtuozzo.com>
Signed-off-by: Edgar Kaziakhmedov <edgar.kaziakhmedov@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180112090122.1702-3-klim.kireev@virtuozzo.com
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The GTK 3.0 release was made in Feb, 2011:
https://blog.gtk.org/2011/02/10/gtk-3-0-released/
That will soon be 7 years ago, which is enough time to consider
the 3.x series widely supported.
Thus we deprecate the GTK 2.x support, which will allow us to
delete it in the last release of 2018. By this time, GTK 3.x
will be almost 8 years old.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171212113440.16483-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When --enable-debug is turned on, configure doesn't set -O level, and
uses default compiler -O0 level, which is slow.
Instead, use -Og if supported by the compiler (optimize debugging
experience), or -O1 (keeps code somewhat debuggable and works around
compiler bugs).
Unfortunately, gcc has many false-positive maybe-uninitialized
errors with Og and O1 (f27 gcc 7.2.1 20170915):
/home/elmarco/src/qemu/hw/ipmi/isa_ipmi_kcs.c: In function ‘ipmi_kcs_ioport_read’:
/home/elmarco/src/qemu/hw/ipmi/isa_ipmi_kcs.c:279:12: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
return ret;
^~~
cc1: all warnings being treated as errors
make: *** [/home/elmarco/src/qemu/rules.mak:66: hw/ipmi/isa_ipmi_kcs.o] Error 1
make: *** Waiting for unfinished jobs....
/home/elmarco/src/qemu/hw/ide/ahci.c: In function ‘ahci_populate_sglist’:
/home/elmarco/src/qemu/hw/ide/ahci.c:903:58: error: ‘tbl_entry_size’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if ((off_idx == -1) || (off_pos < 0) || (off_pos > tbl_entry_size)) {
~~~~~~~~~^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [/home/elmarco/src/qemu/rules.mak:66: hw/ide/ahci.o] Error 1
/home/elmarco/src/qemu/hw/display/qxl.c: In function ‘qxl_add_memslot’:
/home/elmarco/src/qemu/hw/display/qxl.c:1397:52: error: ‘pci_start’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
memslot.virt_end = virt_start + (guest_end - pci_start);
~~~~~~~~~~~~~^~~~~~~~~~~~
/home/elmarco/src/qemu/hw/display/qxl.c:1389:9: error: ‘pci_region’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
qxl_set_guest_bug(d, "%s: pci_region = %d", __func__, pci_region);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
There seems to be a long list of related bugs in upstream GCC, some of
them are being fixed very recently:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=24639
For now, let's workaround it by using Wno-maybe-uninitialized (gcc-only).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180104160523.22995-5-marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When linking qemu-ga under some configuration (when gthread-2.0.pc
doesn't have -pthread, as happening atm with meson build), you may
have this linking issue:
/usr/bin/ld: libqemuutil.a(qemu-thread-posix.o): undefined reference to symbol 'pthread_setname_np@@GLIBC_2.12'
/usr/lib64/libpthread.so.0: error adding symbols: DSO missing from command line
Make sure qemu-ga links with the pthread library, by adding correct
flags to libs_qga.
This is really a QEMU bug, because it's QEMU code that's using pthread
functions, and so we must explicitly link against pthreads. The bug
was just masked by the fact that often some pkg-config or another for
one of our dependencies will add -pthread to the link line anyway.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180104160523.22995-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add target aarch64_be-linux-user. This allows a qemu-aarch64_be binary
to be built that will run big-endian aarch64 binaries.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-5-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit c97d6d2cdf we accidentally added code to configure
that uses '==' for string equality testing. This is a bashism --
the portable way to write this is '='.
This fixes the "Unexpected operator error" complaint produced
if the system /bin/sh is dash.
Fixes: c97d6d2cdf
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1515431442-23795-1-git-send-email-peter.maydell@linaro.org
This file begins tracking the files that will be the code base for HVF
support in QEMU. This code base is part of Google's QEMU version of
their Android emulator, and can be found at
https://android.googlesource.com/platform/external/qemu/+/emu-master-dev
This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted
Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is
appropriately licensed under GPL v2-or-later, except for the code inside
x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel),
is licensed GPL v2-only.
This code base already implements a very great deal of functionality,
although Google's version removed from Vertuu's the support for APIC
page and hyperv-related stuff. According to the Android Emulator Release
Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now
enabled by default on macOS for 32-bit x86 images to improve performance
and macOS compatibility", although we better use with caution for, as the
same Revision warns us, "If you experience issues with it specifically,
please file a bug report...". The code hasn't seen much update in the
last 5 months, so I think that we can further develop the code with
occasional visiting Google's repository to see if there has been any
update.
On top of Google's code, the following changes were made:
- add code to the configure script to support the --enable-hvf argument.
If the OS is Darwin, it checks for presence of HVF in the system. The
patch also adds strings related to HVF in the file qemu-options.hx.
QEMU will only support the modern syntax style '-M accel=hvf' no enable
hvf; the legacy '-enable-hvf' will not be supported.
- fix styling issues
- add glue code to cpus.c
- move HVFX86EmulatorState field to CPUX86State, changing the
the emulation functions to have a parameter with signature 'CPUX86State *'
instead of 'CPUState *' so we don't have to get the 'env'.
Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com>
Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since there are some issues in memory alloc/free machenism
in glibc for little chunk memory, if Qemu frequently
alloc/free little chunk memory, the glibc doesn't alloc
little chunk memory from free list of glibc and still
allocate from OS, which make the heap size bigger and bigger.
This patch introduce malloc_trim(), which will free heap
memory when there is no rcu call during rcu thread loop.
malloc_trim() can be enabled/disabled by --enable-malloc-trim/
--disable-malloc-trim in the Qemu configure command. The
default malloc_trim() is enabled for libc.
Below are test results from smaps file.
(1)without patch
55f0783e1000-55f07992a000 rw-p 00000000 00:00 0 [heap]
Size: 21796 kB
Rss: 14260 kB
Pss: 14260 kB
(2)with patch
55cc5fadf000-55cc61008000 rw-p 00000000 00:00 0 [heap]
Size: 21668 kB
Rss: 6940 kB
Pss: 6940 kB
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <1513775806-19779-1-git-send-email-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent glibc added memfd_create in sys/mman.h. This conflicts with
the definition in util/memfd.c:
/builddir/build/BUILD/qemu-2.11.0-rc1/util/memfd.c:40:12: error: static declaration of memfd_create follows non-static declaration
Fix the configure test, and remove the sys/memfd.h inclusion since the
file actually does not exist---it is a typo in the memfd_create(2) man
page.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When executing 'configure' in a fresh QEMU clone, in a fresh
OS install running in a ppc64le host, this is the error
shown:
-----
../configure --enable-trace-backend=simple --enable-debug
--target-list=ppc64-softmmu
ERROR: Unsupported CPU = ppc64le, try --enable-tcg-interpreter
-----
This isn't true, ppc64le host CPU is supported. This happens because,
in a fresh install, we don't have a C compiler to autodetect
the $cpu variable to "ppc64".
This patch moves the CC available check up a bit, just before verifying
the host CPU. This ensures that we bail out with a $CC not available
error instead of unsupported CPU (the host CPU detection without
the compiler wouldn't work properly anyway). It also allows --help to
keep working without a C compiler. With this patch, in the same ppc64le
host without gcc:
$ ../configure --enable-trace-backend=simple --enable-debug
--target-list=ppc64-softmmu
ERROR: "cc" either does not exist or does not work
$ ../configure --help
Usage: configure [options]
Options: [defaults in brackets after descriptions]
Standard options:
--help print this message
--prefix=PREFIX install in PREFIX [/usr/local]
--interp-prefix=PREFIX where to find shared libraries, etc.
(...)
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
OpenBSD/i386 uses elf_i386_obsd for the emulation linker.
Signed-off-by: Brad Smith <brad@comstyle.com>
Message-id: 20171107234608.GA395@humpty.home.comstyle.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When cross compiling QEMU for Windows we need to specify the cross
version of ranlib to avoid build errors when building capstone. This
patch ensures we use the same cross prefix on ranlib as other toolchain
components.
- Fedora23 mingw
- RHEL-7.2 with mingw packages from epel:
LINK qemu-img.exe
build-win64/capstone/capstone.lib: error adding symbols: Archive has no
index; run ranlib to add one
collect2: error: ld returned 1 exit status
$ x86_64-w64-mingw32-ar --version
GNU ar (GNU Binutils) 2.25
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <e457d4e906dceea4de6c3431813a06b137c1ab9c.1510103351.git.alistair.francis@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Some people building QEMU use VPATH builds where the source directory is on a
read-only volume. In such a case 'scripts/git-submodules.sh update' will always
fail and users are required to run it manually themselves on their original
writable source directory.
While this is already supported, it is nice to give users a command line flag
to configure to permanently disable automatic submodule updates, as it means
they won't get hard to diagnose failures from git-submodules.sh at an arbitrary
later date.
This patch thus introduces a flag '--disable-git-update' which will prevent
'make' from ever running 'scripts/git-submodules.sh update'. It will still run
the 'status' command to determine if a submodule update is needed, but when it
does this it'll simply stop and print a message instructing the developer what
todo. eg
$ ./configure --target-list=x86_64-softmmu --disable-git-update
...snip...
$ make
GEN config-host.h
GEN trace/generated-tcg-tracers.h
GEN trace/generated-helpers-wrappers.h
GEN trace/generated-helpers.h
GEN trace/generated-helpers.c
GEN module_block.h
GIT submodule checkout is out of date. Please run
scripts/git-submodule.sh update ui/keycodemapdb
from the source directory checkout /home/berrange/src/virt/qemu
make: *** [Makefile:31: git-submodule-update] Error 1
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some users can't run a bare 'git' command, due to need for a transparent
proxying solution such as 'tsocks'. This adds an argument to configure to
let users specify such a thing:
./configure --with-git="tsocks git"
The submodule script is also updated to give the user a hint about using this
flag, if we fail to checkout modules.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
GCC 4.9 and newer stopped warning for missing braces around the
"universal" C zero initializer {0}. One such initializer sneaked
into scsi/qemu-pr-helper.c and is breaking the build with such
older GCC versions.
Detect the lack of support for the idiom, and disable the warning
in that case.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* support for network interface stats
* w32: improvements for guest-set-time
* w32: fix a hang with guest-fsfreeze-freeze when timeout occurs
during heavy I/O
* w32: fix faulty error-handling in VSS/fsfreeze COM registration
-----BEGIN PGP SIGNATURE-----
iQE3BAABCAAhBQJZ8ofZGhxtZHJvdGhAbGludXgudm5ldC5pYm0uY29tAAoJEDNT
yc7xCLWE1lIH/3EHQT72tEJrZRhUW+8/zMxgAeRVaJCUAEJVxJo+VXoStH+qcMw8
gt/kio9R/ly7fJPIY8LebQlJQJTAt++QFl7DQ9cxXtAi+7m5WYAQYo91w5TGIDW2
DczMfZ97yrzN1/m7eOxQ+oWtrQ27esQ1ZxnLCCTA5xrIYzjI9/U7KR4EALh9sV4W
QJymIjDRUaHS0P11uN80mbBwfWkLohT1pPM7dIZxkO83mNdgb1+CzQhXrhFRDJGr
E8ypz6eYeZgpGxEPIdS47U79f4u4ibsVW4rme5mKdLHU0JrWpoqD3d5KKPWeG5MJ
pnIbTDnvyX8r8ayI+j2RR1/hKK7Vf8Xy+qI=
=4JgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2017-10-26-tag' into staging
qemu-ga patch queue for 2.11
* support for network interface stats
* w32: improvements for guest-set-time
* w32: fix a hang with guest-fsfreeze-freeze when timeout occurs
during heavy I/O
* w32: fix faulty error-handling in VSS/fsfreeze COM registration
# gpg: Signature made Fri 27 Oct 2017 02:11:53 BST
# gpg: using RSA key 0x3353C9CEF108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg: aka "Michael Roth <mdroth@utexas.edu>"
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
# Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584
* remotes/mdroth/tags/qga-pull-2017-10-26-tag:
qga-win: fix error-handling in getNameByStringSID()
qga: add network stats to guest-network-get-interfaces
qga-win: Updating guest_set_time action
qga-win: don't hang if vss hold writes timeout
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not require the submodule, but use it if present. Allow the
command-line to override system or git submodule either way.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
At the moment, Windows libraries don't provide a way to access
RTC, so, a workaround is to use the Windows w32tm command to
resync the time.
Related bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1183874
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Reviewed-by: Sameeh Jubran <sameeh@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If configured, prefer this over our rather dated copy of the
GPLv2-only binutils. This will be especially apparent with
the proposed vector extensions to TCG, as disas/i386.c does
not handle AVX.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't need qemu-keymap when we build only linux-user qemu.
When we compile in static mode, the libxkbcommon is detected
by configure if the shared one is available, but cannot
be linked if the static version is not available.
As we don't need it for qemu-linux-user, and we generally need
a static link to use it in a chroot, disable qemu-keymap in
this case.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171019191606.14129-1-laurent@vivier.eu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
libmultipath has recently changed its API. The new API supports multi-threaded
clients better. Unfortunately there is no backwards-compatibility, so we just
switch to the new one. Running QEMU compiled with the new library on the old
library will likely crash, while doing the opposite will cause QEMU not to
start at all (because udev, get_multipath_config and put_multipath_config
are undefined).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-keymap generates qemu reverse keymaps from xkb keymaps,
which can be used with the qemu "-k" command line switch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171005153330.19210-2-kraxel@redhat.com
The https://gitlab.com/keycodemap/keycodemapdb/ repo contains a
data file mapping between all the different scancode/keycode/keysym
sets that are known, and a tool to auto-generate lookup tables for
different combinations.
It is used by GTK-VNC, SPICE-GTK and libvirt for mapping keys.
Using it in QEMU will let us replace many hand written lookup
tables with auto-generated tables from a master data source,
reducing bugs. Adding new QKeyCodes will now only require the
master table to be updated, all ~20 other tables will be
automatically updated to follow.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-4-berrange@redhat.com
[ kraxel: fix build ]
[ kraxel: switch repo to qemu.git mirror ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently if DTC is required by configure and not available in the host
OS install, we exit with an error message telling the user to checkout a
git submodule or install the library.
This introduces automatic handling of the git submodule checkout process
and enables it for dtc. This only runs if building from GIT, so users of
release tarballs still need the system library install. The current state
of the git checkout is stashed in .git-submodule-status, and a helper
program is used to determine if this state matches the desired submodule
state. A dependency against 'Makefile' ensures that the submodule state
is refreshed at the start of the build process
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-2-berrange@redhat.com
[ kraxel: use /bin/sh not bash for scripts/git-submodule.sh ]
[ kraxel: fix Makefile dependencies ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
[fixup] Makefile dep
This change introduces a new TPM backend driver that can communicate with
swtpm(software TPM emulator) using unix domain socket interface. QEMU talks to
the TPM emulator using QEMU's socket-based chardev backend device.
Swtpm uses two Unix sockets for communications, one for plain TPM commands and
responses, and one for out-of-band control messages. QEMU passes the data
socket to be used over the control channel.
The swtpm and associated tools can be found here:
https://github.com/stefanberger/swtpm
The swtpm's control channel protocol specification can be found here:
https://github.com/stefanberger/swtpm/wiki/Control-Channel-Specification
Usage:
# setup TPM state directory
mkdir /tmp/mytpm
chown -R tss:root /tmp/mytpm
/usr/bin/swtpm_setup --tpm-state /tmp/mytpm --createek
# Ask qemu to use TPM emulator with given tpm state directory
qemu-system-x86_64 \
[...] \
-chardev socket,id=chrtpm,path=/tmp/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis,tpmdev=tpm0 \
[...]
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Add a firmware path config option to configure. Multiple directories
are accepted, with the usual colon as separator. Default value is
${prefix}/share/qemu-firmware. The path is searched in addition to the
current search path (typically ${prefix}/share/qemu).
This prepares qemu for the planned split of the prebuilt firmware blobs
into a separate project.
Distributions can also use this to get rid of the firmware symlink farm
and add -- for example -- /usr/share/seabios to the firmware path
instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170914114236.25343-3-kraxel@redhat.com
This is required to be removed on SmartOS (Illumos).
As of now there are no alternative supported SunOS distributions.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In qemu-thread-posix.c we have two implementations of the
various qemu_sem_* functions, one of which uses native POSIX
sem_* and the other of which emulates them with pthread conditions.
This is necessary because not all our host OSes support
sem_timedwait().
Instead of a hard-coded list of OSes which don't implement
sem_timedwait(), which gets out of date, make configure
test for the presence of the function and set a new
CONFIG_HAVE_SEM_TIMEDWAIT appropriately.
In particular, newer NetBSDs have sem_timedwait(), so this
commit will switch them over to using it. OSX still does
not have an implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
smartcard_cflags is no longer needed since commit
0b22ef0f57.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Proper support of persistent reservation for multipath devices requires
communication with the multipath daemon, so that the reservation is
registered and applied when a path comes up. The device mapper
utilities provide a library to do so; this patch makes qemu-pr-helper.c
detect multipath devices and, when one is found, delegate the operation
to libmpathpersist.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a privileged helper to run persistent reservation commands.
This lets virtual machines send persistent reservations without using
CAP_SYS_RAWIO or out-of-tree patches. The helper uses Unix permissions
and SCM_RIGHTS to restrict access to processes that can access its socket
and prove that they have an open file descriptor for a raw SCSI device.
The next patch will also correct the usage of persistent reservations
with multipath devices.
It would also be possible to support for Linux's IOC_PR_* ioctls in
the future, to support NVMe devices. For now, however, only SCSI is
supported.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170907084230.26493-1-famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
baum.o already receives the sdl cflags in its per object variable, do
the same for brlapi libs to avoid cluttering libs_softmmu.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170907084700.952-1-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
libseccomp supports s390x since version 2.3.0, and I was able to start
a VM with "-sandbox on" without any obvious problems by using this patch,
so it should be safe to allow --enable-seccomp on s390x nowadays, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1505385363-27717-1-git-send-email-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Like many other libraries, libseccomp cflags and libs should only apply
to the building of necessary objects. Do so in the usual way with the
help of per object variables.
Signed-off-by: Fam Zheng <famz@redhat.com>
Nowdays we use libusb for usb-host, so we don't have different code
for linux vs. bsd any more. So there is little reason to have the
HOST_USB variable, we can just write things directly into the Makefile
and avoid a pointless indirection.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20170908111217.21985-2-kraxel@redhat.com
Remove pixman switches from configure, should not be needed any more,
configure can figure by itself whenever pixman is needed or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170905140116.28181-3-kraxel@redhat.com
Drop pixman submodule and support for the "internal" pixman build.
pixman should be reasonably well established meanwhile so we don't
need the fallback submodule any more. While being at it also drop
some #ifdefs for pixman versions older than what we require in
configure anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170905140116.28181-2-kraxel@redhat.com
Nobody has mentioned AIX host support on the mailing list for years,
and we have no test systems for it so it is most likely broken.
We've advertised in configure for two releases now that we plan
to drop support for this host OS, and have had no complaints.
Drop the AIX host support code.
We can also drop the now-unused AIX version of sys_cache_info().
Note that the _CALL_AIX define used in the PPC tcg backend is
also used for Linux PPC64, and so that code should not be removed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1504545540-8002-1-git-send-email-peter.maydell@linaro.org
We threatened to remove ia64 as host in v2.9.0. Its time has now come.
There are still some usages of defined(__ia64__) throughout the source
code that would be triggered if one were to enable TCI on an ia64 host.
Leave those alone for now.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
KVM guests on s390 need a different page table layout than normal
processes (2kb page table + 2kb page status extensions vs 2kb page table
only). As of today this has to be enabled via the vm.allocate_pgste
sysctl.
Newer kernels (>= 4.12) on s390 check for an S390_PGSTE program header
and enable the pgste page table extensions in that case. This makes the
vm.allocate_pgste sysctl unnecessary. We enable this program header for
the s390 system emulation (qemu-system-s390x) if we build on s390
- for s390 system emulation
- the linker supports --s390-pgste (binutils >= 2.29)
- KVM is enabled
This will allow distributions to disable the global vm.allocate_pgste
sysctl, which will improve the page table allocation for non KVM
processes as only 2kb chunks are necessary.
Cc: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Dan Horak <dhorak@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1503483383-199649-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Learn to compile out vhost-user (net, scsi & upcoming users). Keep it
enabled by default on non-win32, that is assumed to be POSIX. Fail if
trying to enable it on win32.
When trying to make a vhost-user netdev, it gives the following error:
-netdev vhost-user,id=foo,chardev=chr-test: Parameter 'type' expects a netdev backend type
And similar error with the HMP/QMP monitors.
While at it, rename CONFIG_VHOST_NET_TEST CONFIG_VHOST_USER_NET_TEST
since it's a vhost-user specific variable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Clang 3.9 passes the CONFIG_AVX2_OPT configure test. However, the
supplied <cpuid.h> does not contain the bit_AVX2 define that we use
when detecting whether the routine can be enabled.
Introduce a qemu-specific header that uses the compiler's definition
of __cpuid et al, but supplies any missing bit_* definitions needed.
This avoids introducing any extra ifdefs to util/bufferiszero.c, and
allows quite a few to be removed from tcg/i386/tcg-target.inc.c.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170719044018.18063-1-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Solaris 9 was released in 2002, its successor Solaris 10 was
released in 2005, and Solaris 9 was end-of-lifed in 2014.
Nobody has stepped forward to express interest in supporting
Solaris of any flavour, so removing support for the ancient
versions seems uncontroversial.
In particular, this allows us to remove a use of 'uname'
in configure that won't work if you're cross-compiling.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1499955697-28045-1-git-send-email-peter.maydell@linaro.org
For a very long time we have used 'uname -s' as our fallback if
we don't identify the target OS using a compiler #define. This
obviously doesn't work for cross-compilation, and we've had
a comment suggesting we fix this in configure for a long time.
Since we now have an exhaustive list of which OSes we can run
on (thanks to commit 898be3e041 making an unrecognized OS
be a fatal error), we know which ones we're missing.
Add check_define tests for the remaining OSes we support. The
defines checked are based on ones we already use in the codebase for
identifying the host OS (with the exception of GNU/kFreeBSD).
We can now set bogus_os immediately rather than doing it later.
We leave the comment about uname being bad untouched, since
there is still a use of it for the fallback for unrecognized
host CPU type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1499958932-23839-1-git-send-email-peter.maydell@linaro.org
Don't try to build the ivshmem-server and ivshmem-client tools unless
CONFIG_IVSHMEM is set.
This fixes in passing a build bug on NetBSD, which fails to build the
ivshmem tools because they use shm_open() and on NetBSD that requires
linking against -lrt.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-4-git-send-email-peter.maydell@linaro.org
[PMM: moved some code into earlier patches; minor bugfixes;
added commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than relying on everywhere that cares about whether the host
supports ivshmem using CONFIG_EVENTFD, make configure set an explicit
CONFIG_IVSHMEM.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-3-git-send-email-peter.maydell@linaro.org
[PMM: split out from another patch, add commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
