G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This bug is probably lurking there for so long, I cannot even git-blame
my way to the commit first introducing it.
Anyway, because n32 is also TARGET_MIPS64, the address space range
cannot be determined by looking at TARGET_MIPS64 alone. Fix this by only
declaring 48-bit address spaces for n64, or the n32 user emulation will
happily hand out memory ranges beyond the 31-bit limit and crash.
Confirmed to make the minimal reproducing example in the linked issue
behave.
Closes: https://gitlab.com/qemu-project/qemu/-/issues/939
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Tested-by: Andreas K. Huettel <dilfridge@gentoo.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220328035942.3299661-1-xen0n@gentoo.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Since the previous commit 9ea89876f9d ("target/mips: Fix cycle
counter timing calculations"), MIPSCPU::cp0_count_rate is not
used anymore. We don't need it since it is already expressed
as mips_def_t::CCRes. Remove the duplicate and clean.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <>20211213102340.1847248-1-f4bug@amsat.org>
The cp0_count_ns value is calculated from the CP0_COUNT_RATE_DEFAULT
constant in target/mips/cpu.c. The cycle counter resolution is defined
per-CPU in target/mips/cpu-defs.c.inc; use this value for calculating
cp0_count_ns. Fixings timing problems on guest OSs for the 20Kc CPU
which has a CCRes of 1.
Signed-off-by: Simon Burge <simonb@NetBSD.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211213135125.18378-1-simonb@NetBSD.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
These target-specific files use the target-specific CPU state
but lack to include "cpu.h"; i.e.:
../target/riscv/pmp.h:61:23: error: unknown type name 'CPURISCVState'
void pmpcfg_csr_write(CPURISCVState *env, uint32_t reg_index,
^
../target/nios2/mmu.h:43:18: error: unknown type name 'CPUNios2State'
void mmu_flip_um(CPUNios2State *env, unsigned int um);
^
../target/microblaze/mmu.h:88:19: error: unknown type name 'CPUMBState'; did you mean 'CPUState'?
uint32_t mmu_read(CPUMBState *env, bool ea, uint32_t rn);
^~~~~~~~~~
CPUState
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-10-f4bug@amsat.org>
Many files use "qemu/log.h" declarations but neglect to include
it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is
a core component and shouldn't be used that way. Move the
"qemu/log.h" inclusion locally to each unit requiring it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220207082756.82600-10-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Simplify cpu_loop by doing all of the decode in translate.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-18-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Simplify cpu_loop by doing all of the decode in translate.
This fixes a bug in that cpu_loop was not handling the
different layout of the R6 version of break16. This fixes
a bug in that cpu_loop extracted the wrong bits for the
mips16e break16 instruction.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-17-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
FCR0_HAS2008 flag has been enabled in commit ba5c79f262
("target-mips: indicate presence of IEEE 754-2008 FPU in
R6/R5+MSA CPUs"), so remove the obsolete FIXME comment.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028212103.2126176-1-f4bug@amsat.org>
When using the Loongson-3A4000 CPU, the MSAIR is returned with a
zero value (because unimplemented). Checking on real hardware,
this value appears incorrect:
$ cat /proc/cpuinfo
system type : generic-loongson-machine
machine : loongson,generic
cpu model : Loongson-3 V0.4 FPU V0.1
model name : Loongson-3A R4 (Loongson-3A4000) @ 1800MHz
isa : mips1 mips2 mips3 mips4 mips5 mips32r1 mips32r2 mips64r1 mips64r2
ASEs implemented : vz msa loongson-mmi loongson-cam loongson-ext loongson-ext2
...
Checking the CFCMSA opcode result with gdb we get 0x60140:
Breakpoint 1, 0x00000001200037c4 in main ()
1: x/i $pc
=> 0x1200037c4 <main+52>: cfcmsa v0,msa_ir
(gdb) si
0x00000001200037c8 in main ()
(gdb) i r v0
v0: 0x60140
MSAIR bits 17 and 18 are "reserved" per the spec revision 1.12,
so mask them out, and set MSAIR=0x0140 for the Loongson-3A4000
CPU model added in commit af868995e1.
Cc: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211026180920.1085516-1-f4bug@amsat.org>
Only the MSA generic opcode was overlapping with the other
instructions. Since the previous commit removed it, we can
now remove the overlap group. The decodetree script forces
us to re-indent the opcodes.
Diff trivial to review using `git-diff --ignore-all-space`.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-32-f4bug@amsat.org>
All opcodes have been converted to decodetree. The generic
MSA handler is now pointless, remove it.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-31-f4bug@amsat.org>
Convert the CTCMSA (Copy To Control MSA register) opcode
to decodetree. Since it overlaps with the SLDI opcode,
use a decodetree overlap group.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-30-f4bug@amsat.org>
Convert the CFCMSA (Copy From Control MSA register) opcode
to decodetree. Since it overlaps with the SPLATI opcode,
use a decodetree overlap group.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-29-f4bug@amsat.org>
Convert the MOVE.V opcode (Vector Move) to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-28-f4bug@amsat.org>
Convert the COPY_S (Element Copy to GPR Signed) opcode
and INSERT (GPR Insert Element) opcode to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-27-f4bug@amsat.org>
Convert the COPY_U opcode (Element Copy to GPR Unsigned) to
decodetree.
Since the 'n' field is a constant value, use tcg_constant_i32()
instead of a TCG temporary.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-26-f4bug@amsat.org>
Convert instructions with an immediate element index
and data format df/n to decodetree.
Since the 'data format' and 'n' fields are constant values,
use tcg_constant_i32() instead of a TCG temporaries.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-25-f4bug@amsat.org>
Convert 3-register operations to decodetree.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-24-f4bug@amsat.org>
Convert BINSL (Vector Bit Insert Left) and BINSR (Vector Bit
Insert Right) opcodes to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-23-f4bug@amsat.org>
Convert 3-register operations to decodetree.
Per the Encoding of Operation Field for 3R Instruction Format'
(Table 3.25), these instructions are not defined for the BYTE
format. Therefore the TRANS_DF_iii_b() macro returns 'false'
in that case, because no such instruction is decoded.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-22-f4bug@amsat.org>
Convert 3-register operations to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Note, the format definition could be named @3rf_b (for
3R with a df field BYTE-based) but since the instruction
class is named '3R', we simply call the format @3r to
ease reviewing the msa.decode file.
However we directly call the trans_msa_3rf() function,
which handles the BYTE-based df field.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-21-f4bug@amsat.org>
Convert 3-register floating-point or fixed-point operations
to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-20-f4bug@amsat.org>
Convert 3-register floating-point or fixed-point operations
to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-19-f4bug@amsat.org>
Convert 3-register instructions with implicit data formats
to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-18-f4bug@amsat.org>
Convert 2-register operations to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-17-f4bug@amsat.org>
Convert the FILL opcode (Vector Fill from GPR) to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-16-f4bug@amsat.org>
Convert 2-register floating-point operations to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-15-f4bug@amsat.org>
Convert load/store instructions to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-14-f4bug@amsat.org>
Convert instructions with an 8-bit immediate value and either
implicit data format or data format df to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-13-f4bug@amsat.org>
Convert the SHF opcode (Immediate Set Shuffle Elements) to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-12-f4bug@amsat.org>
Convert instructions with an immediate bit index and
data format df/m to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-11-f4bug@amsat.org>
Convert instructions with a 5-bit immediate value to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-10-f4bug@amsat.org>
Convert the LDI opcode (Immediate Load) to decodetree. Since it
overlaps with the generic MSA handler, use a decodetree overlap
group.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-9-f4bug@amsat.org>
This 'shift amount' format is not always 16-bit, so name it
generically as 'sa'. This will help to unify the various
arg_msa decodetree generated structures.
Rename the @bz format -> @bz_v (specific @bz with df=3) and
@bz_df -> @bz (generic @bz).
Since we modify &msa_bz, re-align its arguments, so the other
structures added in the following commits stay visually aligned.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-8-f4bug@amsat.org>
Replace magic DataFormat value by the corresponding
enum from CPUMIPSMSADataFormat.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-7-f4bug@amsat.org>
Have check_msa_access() return a boolean value so we can
return early if MSA is not enabled (the instruction got
decoded properly, but we raised an exception).
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-6-f4bug@amsat.org>
The dup_const() helper makes the code easier to follow, use it.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-5-f4bug@amsat.org>
While the first 'off' variable assignment is unused, it helps
to better understand the code logic. Move the assignation where
it would have been used so it is easier to compare the MSA
registers based on FPU ones versus the MSA specific registers.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211023214803.522078-34-f4bug@amsat.org>
