In the unlikely case of invalid typecode mask, the function
will abort instead of returning a NULL pointer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221111074101.2069454-27-richard.henderson@linaro.org>
[PMD: Split from bigger patch]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221122180804.938-2-philmd@linaro.org>
Pre-compute the function call layout for each helper at startup.
Drop TCG_CALL_DUMMY_ARG, as we no longer need to leave gaps
in the op->args[] array. This allows several places to stop
checking for NULL TCGTemp, to which TCG_CALL_DUMMY_ARG mapped.
For tcg_gen_callN, loop over the arguments once. Allocate the TCGOp
for the call early but delay emitting it, collecting arguments first.
This allows the argument processing loop to emit code for extensions
and have them sequenced before the call.
For tcg_reg_alloc_call, loop over the arguments in reverse order,
which allows stack slots to be filled first naturally.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will shortly have the possibility of more that two outputs,
though only for calls (for which preferences are moot). Avoid
direct references to op->output_pref[] when possible.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have been allocating a worst case number of arguments
to support calls. Instead, allow the size to vary.
By default leave space for 4 args, to maximize reuse,
but allow calls to increase the number of args to 32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Split patch in two]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-3-philmd@linaro.org>
In order to have variable size allocated TCGOp, pass the number
of arguments we use (and would allocate) up to tcg_op_alloc().
This alters tcg_emit_op(), tcg_op_insert_before() and
tcg_op_insert_after() prototypes.
In tcg_op_alloc() ensure the number of arguments is in range.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Extracted from bigger patch]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-2-philmd@linaro.org>
Better to re-use the existing function for copying ops.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We copied all of the arguments in copy_op_nocheck.
We only need to replace the one argument that we change.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The function pointer is immediately after the output and input
operands; no need to search.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change 32-bit tci TCG_TARGET_CALL_ARG_I32 to TCG_CALL_ARG_EVEN, to
force 32-bit values to be aligned to 64-bit. With a small reorg
to the argument processing loop, this neatly replaces an ifdef for
CONFIG_TCG_INTERPRETER.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 64-bit hosts that had TCG_TARGET_EXTEND_ARGS, set
TCG_TARGET_CALL_ARG_I32 to TCG_CALL_ARG_EXTEND.
Otherwise, use TCG_CALL_ARG_NORMAL.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 32-bit hosts when TCG_TARGET_CALL_ALIGN_ARGS was set, use
TCG_CALL_ARG_EVEN. For 64-bit hosts, TCG_TARGET_CALL_ALIGN_ARGS
was silently ignored, so always use TCG_CALL_ARG_NORMAL.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prepare to replace a bunch of separate ifdefs with a
consistent way to describe the ABI of a function call.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a helper function for computing the size of a type.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The count is not itself an enumerator. Move it outside to
prevent the compiler from considering it with -Wswitch-enum.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allocate the first of a pair at the lower address, and the
second of a pair at the higher address. This will make it
easier to find the beginning of the larger memory block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The first thing that temp_sync does is check mem_coherent,
so there's no need for the caller to do so.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Record the location of a TCGTemp within a larger object.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the error-generating fallback from tcg-op.c, and
replace "_link_error" with modern QEMU_ERROR markup.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the official extend/extract functions instead of routines
that will shortly be internal to tcg.
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While we initialize this value in cpu_common_reset, that
isn't called during startup, so set it as well in init.
This fixes -singlestep versus the very first TB.
Fixes: 04f5b647ed ("accel/tcg: Handle -singlestep in curr_cflags")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are several instances where we need to be able to
allocate a pair of registers to related inputs/outputs.
Add 'p' and 'm' register constraints for this, in order to
be able to allocate the even/odd register first or second.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation of introducing paired registers,
massage a bit process_op_defs()'s switch case.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Split from bigger patch, 1/3]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221219220925.79218-2-philmd@linaro.org>
We now check the consistency of reg_to_temp[] with each update,
so the utility of checking consistency at the end of each
opcode is minimal. In addition, the form of this check is
quite expensive, consuming 10% of a checking-enabled build.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create two new functions, set_temp_val_{reg,nonreg}.
Assert that the reg_to_temp mapping is correct before
any changes are made.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The assignment to mem_coherent should be done with any
modification, not simply with a newly allocated register.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Unused since commit 7b7d8b2d9a ("tcg/tci: Use ffi for calls").
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The hppa host code has been removed since 2013; this
should have been deleted at the same time.
Fixes: 802b508123 ("tcg-hppa: Remove tcg backend")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace goto allocate_in_reg with a boolean.
Remove o_preferred_regs which isn't used, except to copy.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Narrow the scope of the lock to the actual read/write,
moving the cpu_transation_failed call outside the lock.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In addition, use tcg_enabled instead of !kvm_enabled.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create a wrapper for locking/unlocking the iothread lock.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove whitespace at end of line, plus one place this also
highlights some missing braces.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are going to modify this code, so fix its style first to avoid:
ERROR: spaces required around that '*' (ctx:VxV)
#281: FILE: tcg/s390x/tcg-target.c.inc:1224:
+ uintptr_t mask = ~(0xffffull << i*16);
^
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221130132654.76369-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Like CONFIG_TCG, the enabled method of execution is a host property
not a guest property. This exposes the define to compile-once files.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert tcg/README to rst and move it to docs/devel as a new "TCG Intermediate
Representation" page. There are a few minor changes to improve the aesthetic
of the final output which are as follows:
- Rename the title from "Tiny Code Generator - Fabrice Bellard" to "TCG
Intermediate Representation"
- Remove the section numbering
- Add the missing parameters to the ssadd_vec operations in the "Host
vector operations" section
- Change the path to the Atomic Operations document to use a proper
reference
- Replace tcg/README in tcg.rst with a proper reference to the new document
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20221130100434.64207-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The windows jobs (especially the 32-bit job) recently started to
hit the timeout limit. Bump it a little bit to ease the situation
(80 minutes is quite long already - OTOH, these jobs do not have to
wait for a job from the container stage to finish, so this should
still be OK).
Additionally, some update on the container side recently enabled
OpenGL in these jobs - but the corresponding code fails to compile.
Thus disable OpenGL here for the time being until someone figured
out the proper fix in the shader code for this.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20230104123559.277586-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- fix minor shell-ism that can break check-tcg
- turn off verbose logging on custom runners
- make configure echo call in CI
- fix unused variable in linux-test
- add binary compiler docker image for hexagon
- disable doc and gui builds for tci and disable-tcg builds
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmOlxtEACgkQ+9DbCVqe
KkR/VwgAlgPHfM4JQoG320kWNd/TuB/9NOaBSD/VINyx+uDlbix4NZ16Ij6I6JaG
mOxOAg1RVVUipul7lz4LTh8caKr5c4S+70hZlLxiKSbqkxUlqAdE0TLO88f1xx6q
qBrVQj5YoWBLH0sgsLj+QHhCpP8IGYl/hFjzYA0xbnllt15uiYXoHshBh8/YODnX
UjgGvzABoqlnEh/QD3pT8B5VyCUbF8j46CWWOV+XPSbRrf1FnrNgFIn5kdOJt+jE
cjPaMZSTpP4W5qZWB7xQNhQdBZvnKQV95gUvtEwdmwlpCr8rDfYsRcI8qRpAbHeL
XaDwHuG7Uo9OQf++4K9voH7TptAcqQ==
=0Yp9
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-next-231222-1' of https://gitlab.com/stsquad/qemu into staging
testing updates:
- fix minor shell-ism that can break check-tcg
- turn off verbose logging on custom runners
- make configure echo call in CI
- fix unused variable in linux-test
- add binary compiler docker image for hexagon
- disable doc and gui builds for tci and disable-tcg builds
# gpg: Signature made Fri 23 Dec 2022 15:18:41 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-next-231222-1' of https://gitlab.com/stsquad/qemu:
gitlab-ci: Disable docs and GUIs for the build-tci and build-tcg-disabled jobs
tests/docker: use prebuilt toolchain for debian-hexagon-cross
tests/tcg: fix unused variable in linux-test
configure: repeat ourselves for the benefit of CI
gitlab: turn off verbose logging for make check on custom runners
configure: Fix check-tcg not executing any tests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Next preparatory patches for upcoming Windows host support.
* Cleanup patches.
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAmOlizoXHHFlbXVfb3Nz
QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5VrEQ/+Ie/QqZNP/ZHarjxsLFLJIsqi
XDxQJj24VqOgm8sYCNMJSGyt77UnfoP52pZsKwx0MdV9VDOocIycPsRVEorVAGsH
0DMdd7UQbaNNKSEGk3xNTnhjVIMpIu7/Ha/N/nMkn4J0LkXCbhJsojFn7NHjfsvb
4lSpOtKI8IHbCEWnltbsZ0c8EoHsz2CWHrEnXFoHbiwd+Vli4ff/inF2H9SYsgJB
eHi04logZwO3rTX886vPr6VPMq7vxjkDuRag+Zft2LRsngp89trstQk/fEv0eDoV
Ca0zT8JBYyqcXeeNK0XzI1qESojUHviToGb3u1TMngr00RMPkdVygkSqIDZFAeCR
EbCpcl4Vj9norEVRGffxEGSsbXcK6ivety7fgQxmpoEaF//lfHMUR4b0Dc27wtbo
xv/DP4wC5K5XJlO+oGYzBt5lqZ/B3+xNZIQggOYeoE5JXdi07klgbw8S/14L41R+
hh2J1NMjw/YSkA1DVySb63lgvEHtues9PN4sfA6+C2N+UDurBb1yb0B5fxL3Xlti
/Q1UM8hsCS/oQGZGNF19nQ3GcdI1AxxQCMHjbgJwWa9Q40PWkA6gy3qwoz+e2Erj
ZIFI85TENJSPMGRDFMCnCX8iXjiMQx7VlygVHpQ/VDy8D9QWyMKqkdNif+9Wzf4s
+a0rEB30ih/ldYBkJRw=
=3XCu
-----END PGP SIGNATURE-----
Merge tag 'pull-9p-20221223' of https://github.com/cschoenebeck/qemu into staging
9pfs: Windows host prep, cleanup
* Next preparatory patches for upcoming Windows host support.
* Cleanup patches.
# gpg: Signature made Fri 23 Dec 2022 11:04:26 GMT
# gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395
* tag 'pull-9p-20221223' of https://github.com/cschoenebeck/qemu:
hw/9pfs: Replace the direct call to xxxat() APIs with a wrapper
hw/9pfs: Drop unnecessary *xattr wrapper API declarations
qemu/xattr.h: Exclude <sys/xattr.h> for Windows
MAINTAINERS: Add 9p test client to section "virtio-9p"
9pfs: Fix some return statements in the synth backend
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These jobs use their own "script:" section and thus do not profit from
the global "--disable-docs" from the template. While we're at it, disable
also some GUI front ends here since we do not gain any additional test
coverage by compiling those here again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221208135945.99975-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221221090411.1995037-7-alex.bennee@linaro.org>
The current docker image for cross compiling hexagon guests
is manually built since it takes >2 hours to build from source.
This patch:
1. Solves the above issue by using the prebuilt clang
toolchain hosted on CodeLinaro [1] and maintained by QUIC [2].
2. The dockerfile is also switched from multi-stage to single stage
build to allow the CI docker engine to reuse the layer cache.
3. Re-enables the hexagon-cross-container job to be always run in
CI and makes it a non-optional dependency for the
build-user-hexagon job.
The changes for 1 & 2 together bring down the build time to
~3 minutes in GitLab CI when cache is reused and ~9 minutes
when cache cannot be reused.
[1]: https://github.com/CodeLinaro/hexagon-builder
[2]: https://github.com/quic/toolchain_for_hexagon/releases/
Signed-off-by: Mukilan Thiyagarajan <quic_mthiyaga@quicinc.com>
[AJB: also tweak MAINTAINERS, remove QEMU_JOB_ONLY_FORKS and comment]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221219144354.11659-1-quic_mthiyaga@quicinc.com>
Message-Id: <20221221090411.1995037-6-alex.bennee@linaro.org>
The latest hexagon compiler picks up that we never consume wcount.
Given the name of the #define that rcount checks against is WCOUNT_MAX
I figured the check just got missed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221221090411.1995037-5-alex.bennee@linaro.org>
Our CI system echos the lines it executes but not the expansions. For
the sake of a line of extra verbosity during the configure phase lets
echo the invocation of script to stdout as well as the log when on CI.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221221090411.1995037-4-alex.bennee@linaro.org>
The verbosity adds a lot of unnecessary output to the CI logs which
end up getting truncated anyway. We can always extract information
from the meson test logs on a failure and for the custom runners its
generally easier to re-create failures anyway.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221221090411.1995037-3-alex.bennee@linaro.org>
After configuring with --target-list=hexagon-linux-user
running `make check-tcg` just prints the following:
```
make: Nothing to be done for 'check-tcg'
```
In the probe_target_compiler function, the 'break'
command is used incorrectly. There are no lexically
enclosing loops associated with that break command which
is an unspecfied behaviour in the POSIX standard.
The dash shell implementation aborts the currently executing
loop, in this case, causing the rest of the logic for the loop
in line 2490 to be skipped, which means no Makefiles are
generated for the tcg target tests.
Fixes: c3b570b5a9 (configure: don't enable
cross compilers unless in target_list)
Signed-off-by: Mukilan Thiyagarajan <quic_mthiyaga@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://patchew.org/QEMU/20221207082309.9966-1-quic._5Fmthiyaga@quicinc.com/
Message-Id: <20221207082309.9966-1-quic_mthiyaga@quicinc.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221221090411.1995037-2-alex.bennee@linaro.org>
xxxat() APIs are only available on POSIX platforms. For future
extension to Windows, let's replace the direct call to xxxat()
APIs with a wrapper.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221219102022.2167736-4-bin.meng@windriver.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
These are not used anywhere in the source tree. Drop them.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20221219102022.2167736-3-bin.meng@windriver.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
