Fix interrupt disable logic. Mask value 1 indicates that interrupts are
disabled.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220601172353.3220232-4-fkonrad@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a periodic timer which raises vblank at a frequency of 30Hz.
Note that this is a migration compatibility break for the
xlnx-zcu102 board type.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220601172353.3220232-3-fkonrad@xilinx.com
Changes by fkonrad:
- Switched to transaction-based ptimer API.
- Added the DP_INT_VBLNK_START macro.
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
[PMM: bump vmstate version, add commit message note about
compat break]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The core and the vblend registers size are wrong, they should respectively be
0x3B0 and 0x1E0 according to:
https://www.xilinx.com/htmldocs/registers/ug1087/ug1087-zynq-ultrascale-registers.html.
Let's fix that and use macros when creating the mmio region.
Fixes: 58ac482a66 ("introduce xlnx-dp")
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220601172353.3220232-2-fkonrad@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
module_kconfig is a new directive that should be used with module_obj
whenever that module depends on the Kconfig to be enabled.
When the module is enabled in Kconfig we are sure that its dependencies
will be enabled as well, thus the module will be loaded without any
problem.
The correct way to use module_kconfig is by passing the Kconfig option
to module_kconfig (or the *config-devices.mak without CONFIG_).
Signed-off-by: Jose R. Ziviani <jziviani@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Message-Id: <165369002370.5857.12150544416563557322.stgit@work>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This series updates the SeaBIOS-hppa firmware to version 5, in which additional
HP fonts were added to the firmware and the firmware boot console was fixed to
accept input from the emulated PS/2 keyboard when running in graphical mode
(serial console was working before already). To test use the "-boot menu=on"
qemu option.
The artist graphics card driver got various fixes when running the X11-Windows
on HP-UX:
- fixes the horizontal and vertical postioning of the X11 cursor with HP-UX
- allows X11 to blank the screen (e.g. screensaver)
- allows the X11 driver to turn the X11 cursor on/off
Signed-off-by: Helge Deller <deller@gmx.de>
--
Changes compared to version 2 of this series:
- Fixed style issues in the X-cursor positioning patch (noticed by Mark Cave-Ayland)
Changes compared to version 1 of this series:
- Added some Acked-by's from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- SeaBIOS-hppa v5 instead of v4 (PS/2 keyboard now works in boot console)
- integrated artist X11 X-cusor positioning fix (which was sent serperately before)
--
This series should apply cleanly on git head and can be pulled for testing
from: https://github.com/hdeller/qemu-hppa.git artist-cursor-fix-final
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYoUcLwAKCRD3ErUQojoP
X/joAQCmuV5MD+BTWf91fRTfzXSfOYSp1XahTaItUldKG2ZBWQD+Lflhsoyg4xLd
2daeDRN1tH2HWldjnCPyMyZ5Ag97PwY=
=ZrTm
-----END PGP SIGNATURE-----
Merge tag 'artist-cursor-fix-final-pull-request' of https://github.com/hdeller/qemu-hppa into staging
hppa: Artist graphics driver fixes for HP-UX and keyboard fix in firmware boot console
This series updates the SeaBIOS-hppa firmware to version 5, in which additional
HP fonts were added to the firmware and the firmware boot console was fixed to
accept input from the emulated PS/2 keyboard when running in graphical mode
(serial console was working before already). To test use the "-boot menu=on"
qemu option.
The artist graphics card driver got various fixes when running the X11-Windows
on HP-UX:
- fixes the horizontal and vertical postioning of the X11 cursor with HP-UX
- allows X11 to blank the screen (e.g. screensaver)
- allows the X11 driver to turn the X11 cursor on/off
Signed-off-by: Helge Deller <deller@gmx.de>
--
Changes compared to version 2 of this series:
- Fixed style issues in the X-cursor positioning patch (noticed by Mark Cave-Ayland)
Changes compared to version 1 of this series:
- Added some Acked-by's from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- SeaBIOS-hppa v5 instead of v4 (PS/2 keyboard now works in boot console)
- integrated artist X11 X-cusor positioning fix (which was sent serperately before)
--
This series should apply cleanly on git head and can be pulled for testing
from: https://github.com/hdeller/qemu-hppa.git artist-cursor-fix-final
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYoUcLwAKCRD3ErUQojoP
# X/joAQCmuV5MD+BTWf91fRTfzXSfOYSp1XahTaItUldKG2ZBWQD+Lflhsoyg4xLd
# 2daeDRN1tH2HWldjnCPyMyZ5Ag97PwY=
# =ZrTm
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 May 2022 09:17:51 AM PDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'artist-cursor-fix-final-pull-request' of https://github.com/hdeller/qemu-hppa:
artist: Fix X cursor position calculation in X11
artist: Emulate screen blanking
artist: Allow to turn cursor on or off
artist: Fix vertical X11 cursor position in HP-UX
artist: Use human-readable variable names instead of reg_xxx
artist: Introduce constant for max cursor size
seabios-hppa: Update SeaBIOS-hppa to VERSION 5
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The X cursor postion can be calculated based on the backporch and
interleave values. In the emulation we ignore the HP-UX settings for
backporch and use instead twice the size of the emulated cursor. With
those changes the X-position of the graphics cursor is now finally
working correctly on HP-UX 10 and HP-UX 11.
Based on coding in Xorg X11R6.6
Signed-off-by: Helge Deller <deller@gmx.de>
The misc_video and misc_ctrl registers control the visibility of the
screen. Start with the screen turned on, and hide or show the screen
based on the control registers.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Bit 0x80 in the cursor_cntrl register specifies if the cursor
should be visible. Prevent rendering the cursor if it's invisible.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Drop the hard-coded value of 1146 lines which seems to work with HP-UX
11, but not with HP-UX 10. Instead encode the screen height in byte 0 of
active_lines_low and byte 3 of misc_video as it's expected by the Xorg
X11 graphics driver.
This potentially allows for higher vertical screen resolutions than
1280x1024 with X11.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Convert the variable names of some registers to human-readable and
understandable names.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Add the constant NGLE_MAX_SPRITE_SIZE which defines the currently
maximum supported cursor size.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This patch adds a get_vhost() callback function for VirtIODevices that
returns the device's corresponding vhost_dev structure, if the vhost
device is running. This patch also adds a vhost_started flag for
VirtIODevices.
Previously, a VirtIODevice wouldn't be able to tell if its corresponding
vhost device was active or not.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-3-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch drops the name parameter for the virtio_init function.
The pair between the numeric device ID and the string device ID
(name) of a virtio device already exists, but not in a way that
lets us map between them.
This patch lets us do this and removes the need for the name
parameter in the virtio_init function.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-2-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The framebuffer_update_display() function returns the dirty scanlines that were
touched since the last display update, however artist_update_display() always calls
dpy_gfx_update() with start and end scanlines of 0 and s->height causing the
entire display surface to be rendered on every update.
Update artist_update_display() so that dpy_gfx_update() only renders the dirty
scanlines on the display surface, bypassing the display surface rendering
completely if framebuffer_update_display() indicates no changes occurred.
This noticeably improves boot performance when the framebuffer is enabled on my
rather modest laptop here, including making the GTK UI usable.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220504153708.10352-4-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This macro is unused and so can simply be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220504153708.10352-3-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Ensure that subsequent patches do not cause checkpatch to fail and also tidy up
extra/missing newlines.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220504153708.10352-2-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
In certain circumstances, typically when there is lots changing on the
screen, updates will be discarded resulting in garbled output.
This change simplifies the traversal of the display update FIFO queue
when applying updates. We just track the queue length and iterate up to
the end of the queue.
Additionally when adding updates to the queue, if the buffer reaches
capacity we force a flush before accepting further events.
Signed-off-by: Carwyn Ellis <carwynellis@gmail.com>
Message-Id: <20220206183956.10694-3-carwynellis@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* whpx support for breakpoints and stepping
* initial support for Hyper-V Synthetic Debugging
* use monotonic clock for QemuCond and QemuSemaphore
* Remove qemu-common.h include from most units and lots of other clenaups
* do not include headers for all virtio devices in virtio-ccw.h
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJXCQAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNT6wf+NHDJUEdDiwaVGVTGXgHuiaycsymi
FpNPiw/+XxSGN5xF3fkUGgqaDrcwIYwVfnXlghKSz8kp1cP3cjxa5CzNMLGTp5je
N6BxFbD7yC6dhagGm3mj32jlsptv3M38OHqKc3t+RaUAotP5RF2VdCyfUBLG6vU0
aMzvMfMtB5aG0D8Fr5EV63t1JMTceFU0YxsG73UCFs2Yx4Z0cGBbNxMbHweRhd1q
tPeVDS46MFPM3/2cGGHpeeqxkoCTU7A9j1VuNQI3k+Kg+6W5YVxiK/UP7bw77E/a
yAHsmIVTNro8ajMBch73weuHtGtdfFLvCKc6QX6aVjzK4dF1voQ01E7gPQ==
=rMle
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Add cpu0-id to query-sev-capabilities
* whpx support for breakpoints and stepping
* initial support for Hyper-V Synthetic Debugging
* use monotonic clock for QemuCond and QemuSemaphore
* Remove qemu-common.h include from most units and lots of other clenaups
* do not include headers for all virtio devices in virtio-ccw.h
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJXCQAUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNT6wf+NHDJUEdDiwaVGVTGXgHuiaycsymi
# FpNPiw/+XxSGN5xF3fkUGgqaDrcwIYwVfnXlghKSz8kp1cP3cjxa5CzNMLGTp5je
# N6BxFbD7yC6dhagGm3mj32jlsptv3M38OHqKc3t+RaUAotP5RF2VdCyfUBLG6vU0
# aMzvMfMtB5aG0D8Fr5EV63t1JMTceFU0YxsG73UCFs2Yx4Z0cGBbNxMbHweRhd1q
# tPeVDS46MFPM3/2cGGHpeeqxkoCTU7A9j1VuNQI3k+Kg+6W5YVxiK/UP7bw77E/a
# yAHsmIVTNro8ajMBch73weuHtGtdfFLvCKc6QX6aVjzK4dF1voQ01E7gPQ==
# =rMle
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 13 Apr 2022 10:31:44 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (53 commits)
target/i386: Remove unused XMMReg, YMMReg types and CPUState fields
target/i386: do not access beyond the low 128 bits of SSE registers
virtio-ccw: do not include headers for all virtio devices
virtio-ccw: move device type declarations to .c files
virtio-ccw: move vhost_ccw_scsi to a separate file
s390x: follow qdev tree to detect SCSI device on a CCW bus
hw: hyperv: Initial commit for Synthetic Debugging device
hyperv: Add support to process syndbg commands
hyperv: Add definitions for syndbg
hyperv: SControl is optional to enable SynIc
thread-posix: optimize qemu_sem_timedwait with zero timeout
thread-posix: implement Semaphore with QemuCond and QemuMutex
thread-posix: use monotonic clock for QemuCond and QemuSemaphore
thread-posix: remove the posix semaphore support
whpx: Added support for breakpoints and stepping
build-sys: simplify AF_VSOCK check
build-sys: drop ntddscsi.h check
Remove qemu-common.h include from most units
qga: remove explicit environ argument from exec/spawn
Move fcntl_setfl() to oslib-posix
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prevent potential integer overflow by limiting 'width' and 'height' to
512x512. Also change 'datasize' type to size_t. Refer to security
advisory https://starlabs.sg/advisories/22-4206/ for more information.
Fixes: CVE-2021-4206
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220407081712.345609-1-mcascell@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Avoid fetching 'width' and 'height' a second time to prevent possible
race condition. Refer to security advisory
https://starlabs.sg/advisories/22-4207/ for more information.
Fixes: CVE-2021-4207
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220407081106.343235-1-mcascell@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
QEMU currently abort()s if the user tries to add a second ISA VGA
device, for example:
$ ./qemu-system-x86_64 -device isa-vga -device isa-vga
RAMBlock "vga.vram" already registered, abort!
Aborted (core dumped)
$ ./qemu-system-x86_64 -device isa-cirrus-vga -device isa-cirrus-vga
RAMBlock "vga.vram" already registered, abort!
Aborted (core dumped)
$ ./qemu-system-mips64el -M pica61 -device isa-vga
RAMBlock "vga.vram" already registered, abort!
Aborted (core dumped)
Such a crash should never happen just because of giving bad parameters
at the command line. Let's return a proper error message instead.
(The idea is based on an original patch by Jose R. Ziviani for the
isa-vga device, but this now fixes it for the isa-cirrus-vga device, too)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/44
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220317083027.16688-4-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vga_common_init() function currently cannot report errors to its
caller. But in the following patch, we'd need this possibility, so
let's change it to take an "Error **" as parameter for this.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220317083027.16688-3-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Most of the code in this function had been indented with 5 spaces instead
of 4. Since 4 is our preferred style, remove one space in the bad lines here.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220317083027.16688-2-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If booting Linux directly in the q800 machine using -kernel rather than using a
MacOS toolbox ROM, the mode control registers are never initialised,
causing macfb_mode_write() to fail to determine the current resolution after
migration. Resolve this by always setting the initial values of the mode control
registers based upon the initial macfb properties during realize.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
These fields are required in the migration stream to restore macfb state
correctly.
Note this is a migration break, but since there are upcoming incompatible changes
for the q800 machine (and migration does not even succeed without these patches)
then this is not an issue.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The MacOS toolbox ROM accesses a number of addresses between 0x0 and 0x200 during
initialisation and resolution changes. Whilst the function of many of these
registers is unknown, it is worth the minimal cost of saving these extra values as
part of migration to help future-proof the migration stream for the q800 machine
as it starts to stabilise.
Note this is a migration break, but since there are upcoming incompatible changes
for the q800 machine (and migration does not even succeed without these patches)
then this is not an issue.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The current IRQ state and IRQ mask are handled exactly the same as standard
register accesses, so store these values directly in the regs array rather
than having separate variables for them.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently when QEMU tries to migrate the macfb framebuffer it crashes randomly
because the opaque provided by the DeviceClass vmsd property for both devices
is set to MacfbState rather than MacfbNubusState or MacfbSysBusState as
appropriate.
Resolve the issue by adding new VMStateDescriptions for MacfbNubusState and
MacfbSysBusState which embed the existing vmstate_macfb VMStateDescription
within them using VMSTATE_STRUCT.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Debug output was always being sent to STDERR.
This has been replaced with trace events.
Signed-off-by: Carwyn Ellis <carwynellis@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220206183956.10694-2-carwynellis@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The clock field is 16-bits in EDID Detailed Timing Descriptor, but
edid_desc_timing assumed it is 32-bit. Write the 16-bit value if it fits
in 16-bit. Write DisplayID otherwise.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220213021529.2248-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* Some small fixes for the qtests
* Misc header cleanups by Philippe
-----BEGIN PGP SIGNATURE-----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=/azS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2022-02-21' into staging
* Improve virtio-net failover test
* Some small fixes for the qtests
* Misc header cleanups by Philippe
# gpg: Signature made Mon 21 Feb 2022 11:40:37 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2022-02-21: (25 commits)
hw/tricore: Remove unused and incorrect header
hw/m68k/mcf: Add missing 'exec/hwaddr.h' header
exec/exec-all: Move 'qemu/log.h' include in units requiring it
softmmu/runstate: Clean headers
linux-user: Add missing "qemu/timer.h" include
target: Add missing "qemu/timer.h" include
core/ptimers: Remove unnecessary 'sysemu/cpus.h' include
exec/ramblock: Add missing includes
qtest: Add missing 'hw/qdev-core.h' include
hw/acpi/memory_hotplug: Remove unused 'hw/acpi/pc-hotplug.h' header
hw/remote: Add missing include
hw/tpm: Clean includes
scripts: Remove the old switch-timer-api script
tests/qtest: failover: migration abort test with failover off
tests/qtest: failover: test migration if the guest doesn't support failover
tests/qtest: failover: check migration with failover off
tests/qtest: failover: check missing guest feature
tests/qtest: failover: check the feature is correctly provided
tests/qtest: failover: use a macro for check_one_card()
tests/qtest: failover: clean up pathname of tests
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
More than 1k of TypeInfo instances are already marked as const. Mark the
remaining ones, too.
This commit was created with:
git grep -z -l 'static TypeInfo' -- '*.c' | \
xargs -0 sed -i 's/static TypeInfo/static const TypeInfo/'
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20220117145805.173070-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Many files use "qemu/log.h" declarations but neglect to include
it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is
a core component and shouldn't be used that way. Move the
"qemu/log.h" inclusion locally to each unit requiring it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220207082756.82600-10-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYfrIogAKCRD3ErUQojoP
X93ZAP9hqp/FCz/goH7Tpqce6FspHriJm6Ej2Rd7HxZWmh4bpQD/cMjY8qpcA/6r
Nx4bgRPT6kCZwwLx7v2jZ2QsA2KaZAM=
=c0qO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hdeller/tags/hppa-updates-pull-request' into staging
Fixes and updates for hppa target
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
# gpg: Signature made Wed 02 Feb 2022 18:08:34 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/hppa-updates-pull-request:
hw/display/artist: Fix draw_line() artefacts
hw/display/artist: Mouse cursor fixes for HP-UX
hw/display/artist: rewrite vram access mode handling
hppa: Add support for an emulated TOC/NMI button.
hw/hppa: Allow up to 16 emulated CPUs
seabios-hppa: Update SeaBIOS-hppa to VERSION 3
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The draw_line() function left artefacts on the screen because it was using the
x/y variables which were incremented in the loop before. Fix it by using the
unmodified x1/x2 variables instead.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
This patch fix the behaviour and positioning of the X11 mouse cursor in HP-UX.
The current code missed to subtract the offset of the CURSOR_CTRL register from
the current mouse cursor position. The HP-UX graphics driver stores in this
register the offset of the mouse graphics compared to the current cursor
position. Without this adjustment the mouse behaves strange at the screen
borders.
Additionally, depending on the HP-UX version, the mouse cursor position
in the cursor_pos register reports different values. To accommodate this
track the current min and max reported values and auto-adjust at runtime.
With this fix the mouse now behaves as expected on HP-UX 10 and 11.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
When writing this code it was assumed that register 0x118000 is the
buffer access mode for color map accesses. It turned out that this
is wrong. Instead register 0x118000 sets both src and dst buffer
access mode at the same time.
This required a larger rewrite of the code. The good thing is that
both the linear framebuffer and the register based vram access can
now be combined into one function.
This makes the linux 'stifb' framebuffer work, and both HP-UX 10.20
and HP-UX 11.11 are still working.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
The migration code will not look at a VMStateDescription's
minimum_version_id_old field unless that VMSD has set the
load_state_old field to something non-NULL. (The purpose of
minimum_version_id_old is to specify what migration version is needed
for the code in the function pointed to by load_state_old to be able
to handle it on incoming migration.)
We have exactly one VMSD which still has a load_state_old,
in the PPC CPU; every other VMSD which sets minimum_version_id_old
is doing so unnecessarily. Delete all the unnecessary ones.
Commit created with:
sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old')
with the one legitimate use then hand-edited back in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
It missed vmstate_ppc_cpu.
spice updated the spelling (and arguments) of "attache_worker" in
0.15.0. Update QEMU to match, preventing -Wdeprecated-declarations
compilations from reporting build errors.
See also:
974692bda1
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-3-berrange@redhat.com>
Message-Id: <20220105135009.1584676-3-alex.bennee@linaro.org>
Previously, the large modes (>1080p) that were generated by Qemu in its EDID
were all 50 Hz. If we provide them to a Guest OS and the user selects
one of these modes, then the OS by default only gets 50 FPS. This is
especially true for Windows OS. With this patch, we are now exposing a
3840x2160@60 Hz which will allow the guest OS to get 60 FPS.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Satyeshwar Singh <satyeshwar.singh@intel.com>
Message-Id: <20211116221103.27128-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently QEMU defaults to a resolution of 1024x768 when exposing EDID
info to the guest OS. The EDID default info is important as this will
influence what resolution many guest OS will configure the screen with
on boot. It can also potentially influence what resolution the firmware
will configure the screen with, though until very recently EDK2 would
not handle EDID info.
One important thing to bear in mind is that the default graphics card
driver provided by Windows will leave the display set to whatever
resolution was enabled by the firmware on boot. Even if sufficient
VRAM is available, the resolution can't be changed without installing
new drivers. IOW, the default resolution choice is quite important
for usability of Windows.
Modern real world monitor hardware for desktop/laptop has supported
resolutions higher than 1024x768 for a long time now, perhaps as long
as 15+ years. There are quite a wide variety of native resolutions in
use today, however, and in wide screen form factors the height may not
be all that tall.
None the less, it is considered that there is scope for making the
QEMU default resolution slightly larger.
In considering what possible new default could be suitable, choices
considered were 1280x720 (720p), 1280x800 (WXGA) and 1280x1024 (SXGA).
In many ways, vertical space is the most important, and so 720p was
discarded due to loosing vertical space, despite being 25% wider.
The SXGA resolution would be good, but when taking into account
window titlebars/toolbars and window manager desktop UI, this might
be a little too tall for some users to fit the guest on their physical
montior.
This patch thus suggests a modest change to 1280x800 (WXGA). This
only consumes 1 MB per colour channel, allowing double buffered
framebuffer in 8 MB of VRAM. Width wise this is 25% larger than
QEMU's current default, but height wise this only adds 5%, so the
difference isn't massive on the QEMU side.
Overall there doesn't appear to be a compelling reason to stick
with 1024x768 resolution.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211129140508.1745130-1-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vga_mmio_init() is used only one time and not very helpful,
inline and remove it.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206224528.563588-5-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce TYPE_VGA_MMIO, a sysbus device.
While there is no change in the vga_mmio_init()
interface, this is a migration compatibility break
of the MIPS Acer Pica 61 Jazz machine (pica61).
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206224528.563588-4-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Inline vga_mm_init() in vga_mmio_init() to simplify the
next patch review. Kind of.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206224528.563588-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no ISA bus part in the MMIO VGA device, so rename:
* hw/display/vga-isa-mm.c -> hw/display/vga-mmio.c
* CONFIG_VGA_ISA_MM -> CONFIG_VGA_MMIO
* ISAVGAMMState -> VGAMmioState
* isa_vga_mm_init() -> vga_mmio_init()
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206224528.563588-2-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The macfb VRAM memory region was configured with coalescing rather than dirty
memory logging enabled, causing some areas of the screen not to redraw after
a full screen update.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 8ac919a065 ("hw/m68k: add Nubus macfb video card")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220108164147.30813-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
To support configure interrupt for vhost-vdpa
Introduce VIRTIO_CONFIG_IRQ_IDX -1 as configure interrupt's queue index,
Then we can reuse the functions guest_notifier_mask and guest_notifier_pending.
Add the check of queue index in these drivers, if the driver does not support
configure interrupt, the function will just return
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-2-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let devices specify transaction attributes when calling
dma_memory_map().
Patch created mechanically using spatch with this script:
@@
expression E1, E2, E3, E4;
@@
- dma_memory_map(E1, E2, E3, E4)
+ dma_memory_map(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-7-philmd@redhat.com>
GraphicHw.gl_flushed was introduced to notify the
device (vhost-user-gpu) that the GL resources (the display scanout) are
no longer needed.
It was decoupled from QEMU own gl-blocking mechanism, but that
difference isn't helping. Instead, we can reuse QEMU gl-blocking and
notify virtio_gpu_gl_flushed() when unblocking (to unlock
vhost-user-gpu).
An extra block/unblock is added arount dpy_gl_update() so existing
backends that don't block will have the flush event handled. It will
also help when there are no backends associated.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
It's part of Linux headers for a while now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently, virgl initialization error is silent. Make it verbose instead.
(this is likely going to bug later on, as the device isn't fully
initialized)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This reverts commit 7852a77f59.
The check is bogus as it ends up finding itself and falling over.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/733
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206095209.2332376-1-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Rewrite the function using g_string_append_printf() rather than
g_strdup_printf()/g_strconcat().
Fixes: df8abbbadf ("macfb: add common monitor modes supported by the MacOS toolbox ROM")
Cc: mark.cave-ayland@ilande.co.uk
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20211105165254.3544369-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When guest is running Linux/X11 with extended multiple displays mode enabled,
the guest shares one scanout resource each time containing whole surface
rather than sharing individual display output separately. This extended frame
is properly splited and rendered on the corresponding scanout surfaces but
not in case of blob-resource (zero copy).
This code change lets the qemu split this one large surface data into multiple
in case of blob-resource as well so that each sub frame then can be blitted
properly to each scanout.
v2: resizing qemu console in virtio_gpu_update_dmabuf to scanout's width and
height
v3: updating stub function of virtio_gpu_update_dmabuf to match the type
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20211104065153.28897-5-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Any extra draw call for the same blob resource representing guest scanout
before the previous drawing is not finished can break synchronous draw
sequence. To prevent this, drawing is now done only once for each draw
submission (when draw_submitted == true).
v2:
- removed mutex
- updated commit msg
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20210924225105.24930-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The MacOS driver expects a 60.15Hz vertical blank interrupt to be generated by
the framebuffer which in turn schedules the mouse driver via the Vertical Retrace
Manager.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to Apple Technical Note HW26: "Macintosh Quadra Built-In Video" the
in-built framebuffer encodes each 24-bit pixel into 4 bytes. Adjust the 24-bit
RGB pixel encoding accordingly which agrees with the encoding expected by MacOS
when changing into 24-bit colour mode.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The MacOS driver expects the RGB values for the pixel to be in entries 0 and 1
of the colour palette.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The monitor modes table is found by experimenting with the Monitors Control
Panel in MacOS and analysing the reads/writes. From this it can be found that
the mode is controlled by writes to the DAFB_MODE_CTRL1 and DAFB_MODE_CTRL2
registers.
Implement the first block of DAFB registers as a register array including the
existing sense register, the newly discovered control registers above, and also
the DAFB_MODE_VADDR1 and DAFB_MODE_VADDR2 registers which are used by NetBSD to
determine the current video mode.
These experiments also show that the offset of the start of video RAM and the
stride can change depending upon the monitor mode, so update macfb_draw_graphic()
and both the BI_MAC_VADDR and BI_MAC_VROW bootinfo for the q800 machine
accordingly.
Finally update macfb_common_realize() so that only the resolution and depth
supported by the display type can be specified on the command line, and add an
error hint showing the list of supported resolutions and depths if the user tries
to specify an invalid display mode.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since the available resolutions and colour depths are determined by the attached
display type, add a qdev property to allow the display type to be specified.
The main resolutions of interest are high resolution 1152x870 with 8-bit colour
and SVGA resolution up to 800x600 with 24-bit colour so update the q800 machine
to allow high resolution mode if specified and otherwise fall back to SVGA.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The MacOS toolbox ROM uses the monitor sense to detect the display type and then
offer a fixed set of resolutions and colour depths accordingly. Implement the
monitor sense using information found in Apple Technical Note HW26: "Macintosh
Quadra Built-In Video" along with some local experiments.
Since the default configuration is 640 x 480 with 8-bit colour then hardcode
the sense register to return MACFB_DISPLAY_VGA for now.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Currently macfb_common_realize() defines the framebuffer RAM memory region as
being non-migrateable but then immediately registers it for migration. Replace
memory_region_init_ram_nomigrate() with memory_region_init_ram() which is clearer
and does exactly the same thing.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The palette_current index counter has a maximum size of 256 * 3 to cover a full
color palette of 256 RGB entries. Linux assumes that the palette_current index
wraps back around to zero after writing 256 RGB entries so ensure that
palette_current is reset at this point to prevent data corruption within
MacfbState.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
During realize memory_region_init_ram_nomigrate() is used to initialise the RAM
memory region used for the framebuffer but the owner object reference is
incorrect since MacFbState is a typedef and not a QOM type.
Change the memory region owner to be the corresponding DeviceState to fix the
issue and prevent random crashes during macfb_common_realize().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 8ac919a065 ("hw/m68k: add Nubus macfb video card")
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
As per the current Error API best practices, change macfb_commom_realize() to return
a boolean indicating success to reduce errp boiler-plate handling code. Note that
memory_region_init_ram_nomigrate() is also updated to use &error_abort to indicate
a non-recoverable error, matching the behaviour recommended after similar
discussions on memory API failures for the recent nubus changes.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Make sure any errors that occur within the macfb realize chain are detected
and handled correctly to prevent crashes and to ensure that error messages are
reported back to the user.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The macfb device is an on-board framebuffer and so is initialised by the
system declaration ROM included within the MacOS toolbox ROM.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210924073808.1041-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Adding this callback provides a way to resume the processing of
cmds in fenceq and cmdq that were not processed because the UI
was waiting on a fence and blocked cmd processing.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210914211837.3229977-6-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Create sync objects and fences only for dmabufs that are blobs. Once a
fence is created (after glFlush) and is signalled,
graphic_hw_gl_flushed() will be called and virtio-gpu cmd processing
will be resumed.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210914211837.3229977-4-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The CDE desktop on HP-UX 10 shows wrongly rendered pixels when the local screen
menu is closed. This bug was introduced by commit c7050f3f16
("hw/display/artist: Refactor x/y coordination extraction") which converted the
coordinate extraction in artist_vram_read() and artist_vram_write() to use the
ADDR_TO_X and ADDR_TO_Y macros, but forgot to right-shift the address by 2 as
it was done before.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: c7050f3f16 ("hw/display/artist: Refactor x/y coordination extraction")
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <YK1aPb8keur9W7h2@ls3530>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
xlnx_dp_read allows an out-of-bounds read at its default branch because
of an improper index.
According to
https://www.xilinx.com/html_docs/registers/ug1087/ug1087-zynq-ultrascale-registers.html
(DP Module), registers 0x3A4/0x3A4/0x3AC are allowed.
DP_INT_MASK 0x000003A4 32 mixed 0xFFFFF03F Interrupt Mask Register for intrN.
DP_INT_EN 0x000003A8 32 mixed 0x00000000 Interrupt Enable Register.
DP_INT_DS 0x000003AC 32 mixed 0x00000000 Interrupt Disable Register.
In xlnx_dp_write, when the offset is 0x3A8 and 0x3AC, the virtual device
will write s->core_registers[0x3A4
>> 2]. That is to say, the maxize of s->core_registers could be ((0x3A4
>> 2) + 1). However, the current size of s->core_registers is (0x3AF >>
>> 2), that is ((0x3A4 >> 2) + 2), which is out of the range.
In xlxn_dp_read, the access to offset 0x3A8 or 0x3AC will be directed to
the offset 0x3A8 (incorrect functionality) or 0x3AC (out-of-bounds read)
rather than 0x3A4.
This patch enforces the read access to offset 0x3A8 and 0x3AC to 0x3A4,
but does not adjust the size of s->core_registers to avoid breaking
migration.
Fixes: 58ac482a66 ("introduce xlnx-dp")
Signed-off-by: Qiang Liu <cyruscyliu@gmail.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <1628059910-12060-1-git-send-email-cyruscyliu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If users try to add an isa-vga device that was already registered,
still in command line, qemu will crash:
$ qemu-system-mips64el -M pica61 -device isa-vga
RAMBlock "vga.vram" already registered, abort!
Aborted (core dumped)
That particular board registers the device automaticaly, so it's
not obvious that a VGA device already exists. This patch changes
this behavior by displaying a message and exiting without crashing.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/44
Signed-off-by: Jose R. Ziviani <jziviani@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210817192629.12755-1-jziviani@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When using qemu configured with --enabled-modules, the
generic stubs are used instead of the module symbols:
qemu-system-x86_64: -device virtio-vga,blob=on: cannot enable blob resources without udmabuf
Restrict the stubs to Linux and only link them when
CONFIG_VIRTIO_GPU is disabled (only the modularized
version is available when it is enabled).
Reported-by: Maxim R. <mrom06@ya.ru>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/553
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210823100454.615816-2-philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code should check the opposite condition of res->iov because it will be null
if virtio_gpu_create_mapping_iov fails and actually this checking is not even
required because checking on ret covers all failing cases.
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20210830175033.29233-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Before commit 49afbca3b0 ("virtio-gpu: drop
use_virgl_renderer"), use_virgl_renderer was preventing calling GL
functions from non-GL context threads. The innocuously looking
g->parent_obj.use_virgl_renderer = false;
was set the first time virtio_gpu_gl_reset() was called, during
pc_machine_reset() in the main thread. Further virtio_gpu_gl_reset()
calls in IO threads, without associated GL context, were thus skipping
GL calls and avoided warnings or crashes (see also
https://gitlab.freedesktop.org/virgl/virglrenderer/-/issues/226).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210702123221.942432-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This avoids failing to initialize virgl and crashing later on, and clear
the user expectations.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20210705104218.1161101-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit 86dbcdd9c7.
The pre-save assert is gone now, so the migration blocker
is not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210721093347.338536-3-kraxel@redhat.com>
Since commit 551dbd0846 ("migration: check pre_save return in
vmstate_save_state") the pre_save hook can fail. So lets finally
use that to drop the guest-triggerable assert in qxl_pre_save().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210721093347.338536-2-kraxel@redhat.com>
Move some ADC file to where they belong and move some sensors to a
sensor directory, since with new BMCs coming in lots of different
sensors should be coming in. Keep from cluttering things up.
Add support for I2C PMBus devices.
Replace the confusing and error-prone i2c_send_recv and i2c_transfer with
specific send and receive functions. Several errors have already been
made with these, avoid any new errors.
Fix the watchdog_expired field in the IPMI watchdog, it's not a bool,
it's a u8. After a vmstate transfer, the new value could be wrong.
-----BEGIN PGP SIGNATURE-----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=8708
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into staging
Some qemu updates for IPMI and I2C
Move some ADC file to where they belong and move some sensors to a
sensor directory, since with new BMCs coming in lots of different
sensors should be coming in. Keep from cluttering things up.
Add support for I2C PMBus devices.
Replace the confusing and error-prone i2c_send_recv and i2c_transfer with
specific send and receive functions. Several errors have already been
made with these, avoid any new errors.
Fix the watchdog_expired field in the IPMI watchdog, it's not a bool,
it's a u8. After a vmstate transfer, the new value could be wrong.
# gpg: Signature made Fri 09 Jul 2021 17:25:04 BST
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81
* remotes/cminyard/tags/for-qemu-6.1-2: (24 commits)
tests/qtest: add tests for MAX34451 device model
hw/misc: add MAX34451 device
tests/qtest: add tests for ADM1272 device model
hw/misc: add ADM1272 device
hw/i2c: add support for PMBus
ipmi/sim: fix watchdog_expired data type error in IPMIBmcSim struct
hw/i2c: Introduce i2c_start_recv() and i2c_start_send()
hw/i2c: Extract i2c_do_start_transfer() from i2c_start_transfer()
hw/i2c: Make i2c_start_transfer() direction argument a boolean
hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address()
hw/i2c: Remove confusing i2c_send_recv()
hw/misc/auxbus: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/misc/auxbus: Replace 'is_write' boolean by its value
hw/misc/auxbus: Explode READ_I2C / WRITE_I2C_MOT cases
hw/misc/auxbus: Fix MOT/classic I2C mode
hw/i2c/ppc4xx_i2c: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/i2c/ppc4xx_i2c: Add reference to datasheet
hw/display/sm501: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/display/sm501: Simplify sm501_i2c_write() logic
hw/input/lm832x: Define TYPE_LM8323 in public header
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-7-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-6-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Other functions from I2C slave API are named "i2c_slave_XXX()".
Follow that pattern with set_address(). Add docstring along.
No logical change.
Patch created mechanically using:
$ sed -i s/i2c_set_slave_address/i2c_slave_set_address/ \
$(git grep -l i2c_set_slave_address)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Instead of using the confuse i2c_send_recv(), rewrite to directly
call i2c_recv() & i2c_send(), resulting in code easier to review.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
- Extract nanoMIPS, microMIPS, Code Compaction from translate.c
- Allow PCI config accesses smaller than 32-bit on Bonito64 device
- Fix migration of g364fb device on Jazz Magnum
- Fix dp8393x PROM checksum on Jazz Magnum and Quadra 800
- Map the UART devices unconditionally on Jazz Magnum
- Add functional test booting Linux on the Fuloong 2E
-----BEGIN PGP SIGNATURE-----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=rR+B
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd/tags/mips-20210702' into staging
MIPS patches queue
- Extract nanoMIPS, microMIPS, Code Compaction from translate.c
- Allow PCI config accesses smaller than 32-bit on Bonito64 device
- Fix migration of g364fb device on Jazz Magnum
- Fix dp8393x PROM checksum on Jazz Magnum and Quadra 800
- Map the UART devices unconditionally on Jazz Magnum
- Add functional test booting Linux on the Fuloong 2E
# gpg: Signature made Fri 02 Jul 2021 16:36:19 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd/tags/mips-20210702:
hw/mips/jazz: Map the UART devices unconditionally
hw/mips/jazz: specify correct endian for dp8393x device
hw/m68k/q800: fix PROM checksum and MAC address storage
qemu/bitops.h: add bitrev8 implementation
dp8393x: remove onboard PROM containing MAC address and checksum
hw/m68k/q800: move PROM and checksum calculation from dp8393x device to board
hw/mips/jazz: move PROM and checksum calculation from dp8393x device to board
dp8393x: convert to trace-events
dp8393x: checkpatch fixes
g364fb: add VMStateDescription for G364SysBusState
g364fb: use RAM memory region for framebuffer
tests/acceptance: Test Linux on the Fuloong 2E machine
hw/pci-host/bonito: Allow PCI config accesses smaller than 32-bit
hw/pci-host/bonito: Trace PCI config accesses smaller than 32-bit
target/mips: Extract nanoMIPS ISA translation routines
target/mips: Extract the microMIPS ISA translation routines
target/mips: Extract Code Compaction ASE translation routines
target/mips: Add declarations for generic TCG helpers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently when QEMU attempts to migrate the MIPS magnum machine it crashes due
to a mistake in the g364fb VMStateDescription configuration which expects a
G364SysBusState and not a G364State.
Resolve the issue by adding a new VMStateDescription for G364SysBusState and
embedding the existing vmstate_g364fb VMStateDescription inside it using
VMSTATE_STRUCT.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 97a3f6ffbb ("g364fb: convert to qdev")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625163554.14879-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Since the migration stream is already broken, we can use this opportunity to
change the framebuffer so that it is migrated as a RAM memory region rather
than as an array of bytes.
In particular this helps the output of the analyze-migration.py tool which
no longer contains a huge array representing the framebuffer contents.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625163554.14879-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, add an Error parameter to allow reporting the
real error and switch to 0/-errno so that different kind of errors can
be distinguished in the caller.
config_len in vhost_user_get_config() is defined by the device, so if
it's larger than VHOST_USER_MAX_CONFIG_SIZE, this is a programming
error. Turn the corresponding check into an assertion.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-6-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Checking scanout_id in virtio_gpu_do_set_scanout() is too late, for the
"resource_id == 0" case (aka disable scanout) the scanout_id is used
unchecked. Move the check into the callers to fix that.
Fixes: e64d4b6a9b ("virtio-gpu: Refactor virtio_gpu_set_scanout")
Fixes: 32db3c63ae ("virtio-gpu: Add virtio_gpu_set_scanout_blob")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/383
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20210604075029.1201478-1-kraxel@redhat.com>
The highest VBE_DISPI_INDEX_ID version supported by QEMU is
VBE_DISPI_ID5. But currently QEMU only allows writing values up to
VBE_DISPI_ID4 to the VBE_DISPI_INDEX_ID register.
As a result of this when a lower version is written to this register and
later VBE_DISPI_ID5 is written back, reads from the register will
continue to report the lower version.
Indeed SeaBIOS is doing that during VGA initialization which causes
guests to always read VBE_DISPI_ID0 instead of the correct version.
Signed-off-by: Dennis Wölfing <denniswoelfing@gmx.de>
Message-Id: <20210607115303.228659-1-denniswoelfing@gmx.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The "nubus-macfb" currently shows up as uncategorized device in
the output of "-device help". Put it into the display category
to fix this ugliness.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210531073255.46286-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If a blob is available for the cursor, copy the data from the blob.
Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-15-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This API allows Qemu to set the blob allocated by the Guest as
the scanout buffer. If Opengl support is available, then the
scanout buffer would be submitted as a dmabuf to the UI; if not,
a pixman image is created from the scanout buffer and is
submitted to the UI via the display surface.
Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-14-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Creating a small helper function for updating the scanout
will be useful in the next patch where this needs to be
done early in do_set_scanout before returning.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-13-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These helpers can be useful for creating dmabuf objects from blobs
and submitting them to the UI.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-12-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This API allows Qemu to register the blob allocated by the Guest
as a new resource and map its backing storage.
Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-10-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add the property bit, configuration flag and other relevant
macros and definitions associated with this feature.
Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-9-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead of passing the attach_backing object to extract nr_entries
and offset, explicitly pass these as arguments to this function.
This will be helpful when adding create_blob API.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-8-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Store the meta-data associated with a FB in a new object
(struct virtio_gpu_framebuffer) and pass the object to set_scanout.
Also move code in set_scanout into a do_set_scanout function.
This will be helpful when adding set_scanout_blob API.
Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-7-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add helper functions to create a dmabuf for a resource and mmap it.
Also, introduce the fields blob and blob_size so that these helpers
can start to use them but the full picture will emerge only after
adding create_blob API in patch 8 of this series.
To be able to create a dmabuf using the udmabuf driver, Qemu needs
to be lauched with the memfd memory backend like this:
qemu-system-x86_64 -m 8192m -object memory-backend-memfd,id=mem1,size=8192M
-machine memory-backend=mem1
Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-4-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On some MIPS system, page size is 16K, and qxl vga device can
be used for VM in kvm mode. Qxl pci rom size is set 8K fixed,
smaller than 16K page size on host system, it fails to be
added into memslots in kvm mode where memory_size and GPA
are required to align with page size.
This patch fixes this issue.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <1621340448-31617-1-git-send-email-maobibo@loongson.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
Introduce a symbol which can be used to prevent display modules which
need vga support being loaded into system emulators with CONFIG_VGA=n.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210430113547.1816178-1-kraxel@redhat.com
Message-Id: <20210430113547.1816178-16-kraxel@redhat.com>
Now that we have separated the gl and non-gl code flows to two different
devices there is little reason turn on and off virglrenderer usage at
runtime. The gl code can simply use virglrenderer unconditionally.
So drop use_virgl_renderer field and just do that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210430113547.1816178-1-kraxel@redhat.com
Message-Id: <20210430113547.1816178-13-kraxel@redhat.com>
Move device init (realize) and properties.
Drop the virgl property, the virtio-gpu-gl-device has virgl enabled no
matter what. Just use virtio-gpu-device instead if you don't want
enable virgl and opengl. This simplifies the logic and reduces the test
matrix.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210430113547.1816178-1-kraxel@redhat.com
Message-Id: <20210430113547.1816178-4-kraxel@redhat.com>
Just a skeleton for starters, following patches will add more code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210430113547.1816178-1-kraxel@redhat.com
Message-Id: <20210430113547.1816178-3-kraxel@redhat.com>
"3d" -> "virgl" as 3d is a rather broad term.
Hopefully a bit less confusing.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210430113547.1816178-1-kraxel@redhat.com
Message-Id: <20210430113547.1816178-2-kraxel@redhat.com>
dma_memory_map() may map only a part of the request. Happens if the
request can't be mapped in one go, for example due to a iommu creating
a linear dma mapping for scattered physical pages. Should that be the
case virtio-gpu must call dma_memory_map() again with the remaining
range instead of simply throwing an error.
Note that this change implies the number of iov entries may differ from
the number of mapping entries sent by the guest. Therefore the iov_len
bookkeeping needs some updates too, we have to explicitly pass around
the iov length now.
Reported-by: Auger Eric <eric.auger@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210506091001.1301250-1-kraxel@redhat.com
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210506091001.1301250-1-kraxel@redhat.com>
The Detailed Timing Descriptor has only 12 bits to store the
resolution. This limits the guest to 4095 pixels.
This patch adds support for the DisplayID extension, that has 2 full
bytes for that purpose, thus allowing 5k resolutions and above.
Based-on: <20210303152948.59943-2-akihiko.odaki@gmail.com>
Signed-off-by: Konstantin Nazarov <mail@knazarov.com>
Message-Id: <20210315114639.91953-3-mail@knazarov.com>
[ kraxel: minor workflow tweaks ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210427150824.638359-1-kraxel@redhat.com
Message-Id: <20210427150824.638359-9-kraxel@redhat.com>
Some of the EDID extensions like DisplayID do checksums of their
subsections. Currently checksums can be only applied to the whole
extension blocks which are 128 bytes.
This patch allows to checksum arbitrary parts of EDID, and not only
whole extension blocks.
Based-on: <20210303152948.59943-2-akihiko.odaki@gmail.com>
Signed-off-by: Konstantin Nazarov <mail@knazarov.com>
Message-Id: <20210315114639.91953-2-mail@knazarov.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210427150824.638359-1-kraxel@redhat.com
Message-Id: <20210427150824.638359-8-kraxel@redhat.com>
The timing generation is currently performed inside the function that
fills in the DTD. The DisplayID generation needs it as well, so moving
it out to a separate function.
Based-on: <20210303152948.59943-2-akihiko.odaki@gmail.com>
Signed-off-by: Konstantin Nazarov <mail@knazarov.com>
Message-Id: <20210315114639.91953-1-mail@knazarov.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210427150824.638359-1-kraxel@redhat.com
Message-Id: <20210427150824.638359-7-kraxel@redhat.com>
When the 4 descriptors in the base edid block are filled, jump to the
dta extension block. This allows for more than four descriptors.
Happens for example when generating an edid blob with a serial number
(qemu-edid -s $serial).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20210427150824.638359-1-kraxel@redhat.com
Message-Id: <20210427150824.638359-5-kraxel@redhat.com>
Initialize the "Established timings III" block earlier. Also move up
edid_fill_modes(). That'll make sure the offset for the additional
descriptors in the dta block don't move any more, which in turn makes it
easier to actually use them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20210427150824.638359-1-kraxel@redhat.com
Message-Id: <20210427150824.638359-4-kraxel@redhat.com>
Add helper function to find the next free desc block.
Needed when we start to use the dta descriptor entries.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20210427150824.638359-1-kraxel@redhat.com
Message-Id: <20210427150824.638359-3-kraxel@redhat.com>
Stop including hw/boards.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-3-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The include/hw/hw.h header only has a prototype for hw_error(),
so it does not make sense to include this in files that do not
use this function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210326151848.2217216-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When building with --enable-sanitizers we get:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x5618479ec7cf in malloc (qemu-system-aarch64+0x233b7cf)
#1 0x7f675745f958 in g_malloc (/lib64/libglib-2.0.so.0+0x58958)
#2 0x561847c2dcc9 in xlnx_dp_init hw/display/xlnx_dp.c:1259:5
#3 0x56184a5bdab8 in object_init_with_type qom/object.c:375:9
#4 0x56184a5a2bda in object_initialize_with_type qom/object.c:517:5
#5 0x56184a5a24d5 in object_initialize qom/object.c:536:5
#6 0x56184a5a2f6c in object_initialize_child_with_propsv qom/object.c:566:5
#7 0x56184a5a2e60 in object_initialize_child_with_props qom/object.c:549:10
#8 0x56184a5a3a1e in object_initialize_child_internal qom/object.c:603:5
#9 0x5618495aa431 in xlnx_zynqmp_init hw/arm/xlnx-zynqmp.c:273:5
The RX/TX FIFOs are created in xlnx_dp_init(), add xlnx_dp_finalize()
to destroy them.
Fixes: 58ac482a66 ("introduce xlnx-dp")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210323182958.277654-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Windows guests using the "Basic Display Adapter" don't parse the
"Established timings III" block. They also don't parse any edid
extension.
So prefer the "Standard Timings" block to store the display resolutions
in edid_fill_modes(). Also reorder the mode list, so more exotic
resolutions (specifically the ones which are not supported by vgabios)
are moved down and the remaining ones have a better chance to get one of
the eight slots in the "Standard Timings" block.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210316143812.2363588-6-kraxel@redhat.com>
Several QOM type names contain ',':
ARM,bitband-memory
etraxfs,pic
etraxfs,serial
etraxfs,timer
fsl,imx25
fsl,imx31
fsl,imx6
fsl,imx6ul
fsl,imx7
grlib,ahbpnp
grlib,apbpnp
grlib,apbuart
grlib,gptimer
grlib,irqmp
qemu,register
SUNW,bpp
SUNW,CS4231
SUNW,DBRI
SUNW,DBRI.prom
SUNW,fdtwo
SUNW,sx
SUNW,tcx
xilinx,zynq_slcr
xlnx,zynqmp
xlnx,zynqmp-pmu-soc
xlnx,zynq-xadc
These are all device types. They can't be plugged with -device /
device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one
actually works.
They *can* be used with -device / device_add to request help.
Usability is poor, though: you have to double the comma, like this:
$ qemu-system-x86_64 -device SUNW,,fdtwo,help
Trap for the unwary. The fact that this was broken in
device-introspect-test for more than six years until commit e27bd49876
fixed it demonstrates that "the unwary" includes seasoned developers.
One QOM type name contains ' ': "ICH9 SMB". Because having to
remember just one way to quote would be too easy.
Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and '
' by '-' in the other type names.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210304140229.575481-2-armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
The template header is now included only once; just inline its contents
in hw/display/pxa2xx_lcd.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210211141515.8755-10-peter.maydell@linaro.org
