The syscall sigaltstack takes two parameters, not zero. This patch
should have no impact as only values above 4 influence the runtime
behaviour. Nevertheless, it is wrong.
Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Enforce the same restriction on the size of the sigset passed to
pselect6 as the Linux kernel does. This is both correct and silences
a gcc 4.6 warning about a write-only variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add syscall numbers for new syscall numbers; this brings us
into line with Linux 2.6.39.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch was validated with programs from DirectFB-1.0 and
WebKit/DirectFB.
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
DirectFB-1.0 uses at least two of the four added ioctls, and the two
others were added for completeness. This patch was validated with the
program "vlock -all/-new".
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As noticed while looking at "Bump do_syscall() up to 8 syscall arguments"
patch, sync_file_range uses a pad argument on 32bit mips. Deal with it
by reading the correct arguments when on mips.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Remove fenab as it is only written, never used. Add a FIXME
comment about the discrepancy between our behaviour and that
of the Linux kernel for this routine.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Move the access of fpu_save into the commented out skeleton code for
restoring FPU registers on SPARC sigreturn, thus silencing a gcc
4.6 "variable set but never used" warning.
(This doesn't affect the calculation of 'err' because in fact
__get_user() can never fail.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
On 32 bit MIPS a few syscalls have 7 arguments, and so to call
them via NR_syscall the guest needs to be able to pass 8 arguments
to do_syscall(). Raise the number of arguments do_syscall() takes
accordingly.
This fixes some gcc 4.6 compiler warnings about arg7 and arg8
variables being set and never used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Just unfold its definition in only use.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[peter.maydell@linaro.org: fixed typo in the debug code,
added parentheses to fix precedence issue]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Looking at the other architectures, we should be using "how" not "arg1".
Signed-off-by: Juan Quintela <quintela@redhat.com>
[peter.maydell@linaro.org: remove unnecessary initialisation of how]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
We assign ret with the error code, but then return 0 unconditionally.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
The dynamic linker from the GNU C library v2.10+ uses the ELF
auxiliary vector AT_RANDOM [1] as a pointer to 16 bytes with random
values to initialize the stack protection mechanism. Technically the
emulated GNU dynamic linker crashes due to a NULL pointer
derefencement if it is built with stack protection enabled and if
AT_RANDOM is not defined by the QEMU ELF loader.
[1] This ELF auxiliary vector was introduced in Linux v2.6.29.
This patch can be tested with the code above:
#include <elf.h> /* Elf*_auxv_t, AT_RANDOM, */
#include <stdio.h> /* printf(3), */
#include <stdlib.h> /* exit(3), EXIT_*, */
#include <stdint.h> /* uint8_t, */
#include <string.h> /* memcpy(3), */
#if defined(__LP64__) || defined(__ILP64__) || defined(__LLP64__)
# define Elf_auxv_t Elf64_auxv_t
#else
# define Elf_auxv_t Elf32_auxv_t
#endif
main(int argc, char* argv[], char* envp[])
{
Elf_auxv_t *auxv;
/* *envp = NULL marks end of envp. */
while (*envp++ != NULL);
/* auxv->a_type = AT_NULL marks the end of auxv. */
for (auxv = (Elf_auxv_t *)envp; auxv->a_type != AT_NULL; auxv++) {
if (auxv->a_type == AT_RANDOM) {
int i;
uint8_t rand_bytes[16];
printf("AT_RANDOM is: 0x%x\n", auxv->a_un.a_val);
memcpy(rand_bytes, (const uint8_t *)auxv->a_un.a_val, sizeof(rand_bytes));
printf("it points to: ");
for (i = 0; i < 16; i++) {
printf("0x%02x ", rand_bytes[i]);
}
printf("\n");
exit(EXIT_SUCCESS);
}
}
exit(EXIT_FAILURE);
}
Changes introduced in v2 and v3:
* Fix typos + thinko (AT_RANDOM is used for stack canary, not for
ASLR)
* AT_RANDOM points to 16 random bytes stored inside the user
stack.
* Add a small test program.
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Signed-off-by: Laurent ALFONSI <laurent.alfonsi@st.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Some architectures (like Blackfin) only implement pselect6 (and skip
select/newselect). So add support for it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
There were several remaining bugs in the previous implementation of
do_brk():
1. the value of "new_alloc_size" was one page too large when the
requested brk was aligned on a host page boundary.
2. no new pages should be (re-)allocated when the requested brk is
in the range of the pages that were already allocated
previsouly (for the same purpose). Technically these pages are
never unmapped in the current implementation.
The problem/fix can be reproduced/validated with the test-suite above:
#include <unistd.h> /* syscall(2), */
#include <sys/syscall.h> /* SYS_brk, */
#include <stdio.h> /* puts(3), */
#include <stdlib.h> /* exit(3), EXIT_*, */
#include <stdint.h> /* uint*_t, */
#include <sys/mman.h> /* mmap(2), MAP_*, */
#include <string.h> /* memset(3), */
int main()
{
int exit_status = EXIT_SUCCESS;
uint8_t *current_brk = 0;
uint8_t *initial_brk;
uint8_t *new_brk;
uint8_t *old_brk;
int failure = 0;
int i;
void test_brk(int increment, int expected_result) {
new_brk = (uint8_t *)syscall(SYS_brk, current_brk + increment);
if ((new_brk == current_brk) == expected_result)
failure = 1;
current_brk = (uint8_t *)syscall(SYS_brk, 0);
}
void test_result() {
if (!failure)
puts("OK");
else {
puts("failure");
exit_status = EXIT_FAILURE;
}
}
void test_title(const char *title) {
failure = 0;
printf("%-45s : ", title);
fflush(stdout);
}
test_title("Initialization");
test_brk(0, 1);
initial_brk = current_brk;
test_result();
test_title("Don't overlap \"brk\" pages");
test_brk(HOST_PAGE_SIZE, 1);
test_brk(HOST_PAGE_SIZE, 1);
test_result();
/* Preparation for the test "Re-allocated heap is initialized". */
old_brk = current_brk - HOST_PAGE_SIZE;
memset(old_brk, 0xFF, HOST_PAGE_SIZE);
test_title("Don't allocate the same \"brk\" page twice");
test_brk(-HOST_PAGE_SIZE, 1);
test_brk(HOST_PAGE_SIZE, 1);
test_result();
test_title("Re-allocated \"brk\" pages are initialized");
for (i = 0; i < HOST_PAGE_SIZE; i++) {
if (old_brk[i] != 0) {
printf("(index = %d, value = 0x%x) ", i, old_brk[i]);
failure = 1;
break;
}
}
test_result();
test_title("Don't allocate \"brk\" pages over \"mmap\" pages");
new_brk = mmap(current_brk, HOST_PAGE_SIZE / 2, PROT_READ, MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0);
if (new_brk == (void *) -1)
puts("unknown");
else {
test_brk(HOST_PAGE_SIZE, 0);
test_result();
}
test_title("All \"brk\" pages are writable (please wait)");
if (munmap(current_brk, HOST_PAGE_SIZE / 2) != 0)
puts("unknown");
else {
while (current_brk - initial_brk < 2*1024*1024*1024UL) {
old_brk = current_brk;
test_brk(HOST_PAGE_SIZE, -1);
if (old_brk == current_brk)
break;
for (i = 0; i < HOST_PAGE_SIZE; i++)
old_brk[i] = 0xAA;
}
puts("OK");
}
test_title("Maximum size of the heap > 16MB");
failure = (current_brk - initial_brk) < 16*1024*1024;
test_result();
exit(exit_status);
}
Changes introduced in patch v2:
* extend the "brk" test-suite embedded within the commit message;
* heap contents have to be initialized to zero, this bug was
exposed by "tst-calloc.c" from the GNU C library;
* don't [try to] allocate a new host page if the new "brk" is
equal to the latest allocated host page ("brk_page"); and
* print some debug information when DEBUGF_BRK is defined.
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Reviewed-by: Christophe Guillon <christophe.guillon@st.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Since mmap() with MAP_FIXED will map over the top of existing mappings,
it's a bad idea to use it to implement brk(), because brk() with a
large size is likely to overwrite important things like qemu itself
or the host libc. So we drop MAP_FIXED and handle "mapped but at
different address" as an error case instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Fix a bug in the linux-user ELF loader code where it was not correctly
handling images where the lowest vaddr to be loaded was not page aligned.
The problem was that the code to probe for a suitable guest base address
was changing the 'loaddr' variable (by rounding it to a page boundary),
which meant that the load bias would then be incorrectly calculated
unless loaddr happened to already be page-aligned.
Binaries generated by gcc with the default linker script do start with
a loadable segment at a page-aligned vaddr, so were unaffected. This
bug was noticed with a binary created by the Google Go toolchain for ARM.
We fix the bug by refactoring the "probe for guest base" code out into
its own self-contained function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
This patch fixes a "double free()" due to "realloc(syms, 0)" in the
loader when the ELF file has no "useful" symbol, as with the following
example (compiled with "sh4-linux-gcc -nostdlib"):
.text
.align 1
.global _start
_start:
mov #1, r3
trapa #40 // syscall(__NR_exit)
nop
The bug appears when the log (option "-d") is enabled.
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Signed-off-by: Yves JANIN <yves.janin@st.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Fixes crash in i386 when user emulation base address is non-zero.
21797 rt_sigreturn(8,1082124603,1,0,1082126048,1082126248)Exit reason and status: signal 11
Signed-off-by: Mike McCormack <mj.mccormack@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Add command line support for logging to a location other than /tmp/qemu.log.
With logging enabled (command line option -d), the log is written to
the hard-coded path /tmp/qemu.log. This patch adds support for writing
the log to a different location by passing the -D option.
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* rth/axp-next: (26 commits)
target-alpha: Implement TLB flush primitives.
target-alpha: Use a fixed frequency for the RPCC in system mode.
target-alpha: Trap for unassigned and unaligned addresses.
target-alpha: Remap PIO space for 43-bit KSEG for EV6.
target-alpha: Implement cpu_alpha_handle_mmu_fault for system mode.
target-alpha: Implement more CALL_PAL values inline.
target-alpha: Disable interrupts properly.
target-alpha: All ISA checks to use TB->FLAGS.
target-alpha: Swap shadow registers moving to/from PALmode.
target-alpha: Implement do_interrupt for system mode.
target-alpha: Add IPRs to be used by the emulation PALcode.
target-alpha: Use kernel mmu_idx for pal_mode.
target-alpha: Add various symbolic constants.
target-alpha: Use do_restore_state for arithmetic exceptions.
target-alpha: Tidy up arithmetic exceptions.
target-alpha: Tidy exception constants.
target-alpha: Enable the alpha-softmmu target.
target-alpha: Rationalize internal processor registers.
target-alpha: Merge HW_REI and HW_RET implementations.
target-alpha: Cleanup MMU modes.
...
This patch removes all references to signal.h when qemu-common.h is included
as they become redundant.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
There's no need to attempt to match EXCP_* values with PALcode entry
point offsets. Instead, compress all the values to make for more
efficient switch statements within QEMU.
We will be doing TLB fill within QEMU proper, not within the PALcode,
so all of the ITB/DTB miss, double fault, and access exceptions can
be compressed to EXCP_MMFAULT.
Compress all of the EXCP_CALL_PAL exceptions into one.
Use env->error_code to store the specific entry point.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Delete all the code that tried to emulate the real IPRs of some
unnamed CPU. Replace those with just 3 slots that we can use to
communicate trap information between the helper functions that
signal exceptions and the OS trap handler.
Signed-off-by: Richard Henderson <rth@twiddle.net>
* 's390-next' of git://repo.or.cz/qemu/agraf:
s390x: complain when allocating ram fails
s390x: fix memory detection for guests > 64GB
s390x: change mapping base to allow guests > 2GB
s390x: Fix debugging for unknown sigp order codes
s390x: build s390x by default
s390x: remove compatibility cc field
s390x: Adjust GDB stub
s390x: translate engine for s390x CPU
s390x: Adjust internal kvm code
s390x: Implement opcode helpers
s390x: helper functions for system emulation
s390x: Shift variables in CPUState for memset(0)
s390x: keep hint on virtio managing size
s390x: make kvm exported functions conditional on kvm
s390x: s390x-linux-user support
tcg: extend max tcg opcodes when using 64-on-32bit
s390x: fix smp support for kvm
tb_invalidate_page_range() was intended to be used to invalidate an
area of a TB which the guest explicitly flushes from i-cache. However,
QEMU detects writes to code areas where TBs have been generated, so
his has never been useful.
Delete the function, adjust callers.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds support for running s390x binaries in the linux-user emulation
code.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Function bzero is deprecated, so replace it by function memset.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The kernel doesn't fill the buffer provided to sched_getaffinity
with zero bytes, so neither should QEMU.
Signed-off-by: Mike McCormack <mj.mccormack@samsung.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Zeroing of the cpu array should start from &cpus[kernel_ret]
not &cpus[num_zeros_to_fill].
This fixes a crash in EFL's edje_cc running under qemu-arm.
Signed-off-by: Mike McCormack <mj.mccormack@samsung.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Debian Lenny and other installations with older linux versions
failed to compile linux-user because some CLONE_xxx macros are
undefined.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Quite a number of uid/gid related syscalls are only defined on systems
with USE_UID16 defined. This is apperently based on the idea that these
system calls would never be called on non-UID16 systems. Make these
syscalls available for all architectures that define them.
drop alpha hack to support selected UID16 syscalls. MIPS and PowerPC
were also defined as UID16, to get uid/gid syscalls available, drop
this error as well.
Change QEMU to reflect this.
Cc: Ulrich Hecht <uli@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
We keep a list of host architectures that do llseek with the same
syscall as lseek. S390x is one of them, so let's add it to the list.
Original-patch-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
The result needs to be converted as it is stored in an array of struct
ifreq and sizeof(struct ifreq) differs according to target and host
alignment rules.
This patch allows to execute correctly the following program on arm
and m68k:
#include <stdio.h>
#include <sys/ioctl.h>
#include <net/if.h>
#include <alloca.h>
#include <string.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
int main(void)
{
int s, ret;
struct ifconf ifc;
int i;
memset( &ifc, 0, sizeof( struct ifconf ) );
ifc.ifc_len = 8 * sizeof(struct ifreq);
ifc.ifc_buf = alloca(ifc.ifc_len);
s = socket( AF_INET, SOCK_DGRAM, 0 );
if (s < 0) {
perror("Cannot open socket");
return 1;
}
ret = ioctl( s, SIOCGIFCONF, &ifc );
if (s < 0) {
perror("ioctl() failed");
return 1;
}
for (i = 0; i < ifc.ifc_len / sizeof(struct ifreq) ; i ++) {
struct sockaddr_in *s;
s = (struct sockaddr_in*)&ifc.ifc_req[i].ifr_addr;
printf("%s\n", ifc.ifc_req[i].ifr_name);
printf("%s\n", inet_ntoa(s->sin_addr));
}
}
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
PTHREAD_STACK_MIN (16KB) is somewhat inadequate for a new stack for new
QEMU threads. Set new limit to 256K which should be enough, yet doesn't
increase memory pressure significantly.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
The REG_PC constant used in the ARM nwfpe code is fine in the kernel
but when used in qemu can clash with a definition in the host system
include files (in particular on Ubuntu Lucid SPARC, including signal.h
will define a REG_PC). Rename the constant to avoid this issue.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
float*_eq functions have a different semantics than other comparison
functions. Fix that by first renaming float*_quiet() into float*_eq_quiet().
Note that it is purely mechanical, and the behaviour should be unchanged.
That said it clearly highlight problems due to this different semantics,
they are fixed later in this patch series.
Cc: Alexander Graf <agraf@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct the broken attempt to calculate the third argument
to unlock_user() in the code path which unlocked the pollfd
array on return from poll() and ppoll() emulation. (This
only caused a problem if unlock_user() wasn't a no-op, eg
if DEBUG_REMAP is defined.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When emulating a 32 bit Linux user-mode program on a 64 bit target
we implement the llseek syscall in terms of lseek. Correct a bug
which meant we were silently casting the result of host lseek()
to a 32 bit integer as it passed through get_errno() and thus
throwing away the top half.
We also don't try to store the result back to userspace unless
the seek succeeded; this matches the kernel behaviour.
Thanks to Eoghan Sherry for identifying the problem and suggesting
a solution.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If CONFIG_USE_GUEST_BASE is not defined, gcc complains:
linux-user/mmap.c:235: error: comparison of unsigned expression >= 0 is always true
because RESERVED_VA is #defined to 0. Since mmap_find_vma_reserved()
will never be called anyway if RESERVED_VA is always 0, fix this by
simply #ifdef'ing away the function and its callsite.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Support the epoll family of syscalls: epoll_create(), epoll_create1(),
epoll_ctl(), epoll_wait() and epoll_pwait(). Note that epoll_create1()
and epoll_pwait() are later additions, so we have to test separately
in configure for their presence.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Add uses of the float32/float64 boxing and unboxing macros so that
the ARM linux-user targets will compile with USE_SOFTFLOAT_STRUCT_TYPES
enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In case a chrooted build uses XEN or KVM, a looped mount needs to be done to setup the chroot.
The ioctl for loop mount works correctly for arm, mips, ppc32 and sh4, so its now activated.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
The current print_mmap func is only enabled when the target supports the
mmap syscall, but both mmap and mmap2 syscalls use it. This leads to a
build failure when the target supports mmap2 but not mmap.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
This brings flatload.c more in line with the current Linux FLAT loader
which allows targets to handle various FLAT aspects in their own way.
For the common behavior, the new functions get stubbed out.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
The current auto-stack sizing works like it does on a NOMMU system; the
problem is that this only works if the envp/argv arrays are fairly slim.
On a desktop system, this is rarely the case, and can easily blow past
the stack and into data/text regions as the default stack for FLAT progs
is a mere 4KiB. So rather than rely on the NOMMU calculation (which is
only there because NOMMU can't easily allocate gobs of contiguous mem),
calc the full space actually needed and let the MMU host make space.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Some architectures (like Blackfin) only implement ppoll (and skip poll).
So add support for it using existing poll code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Extract from "man realloc":
"If realloc() fails the original block is left untouched;
it is not freed or moved."
Fix a possible memory leak (reported by cppcheck).
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Add support to the linux-user qemu for the -version command line
option, bringing it into line with the system emulation qemu.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Suppress a gcc array bounds overrun warning when filling in the SPARC
signal frame by adjusting our definition of the structure so that the
fp and callers_pc membes are part of the ins[] array rather than
separate fields; since qemu has no need to access the fields individually
there is no need to follow the kernel's structure field naming exactly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When invoking a signal handler for an ARM target, make sure the IT
bits in the CPSR are cleared. (This would otherwise cause incorrect
execution if the IT state was non-zero when an exception occured.
This bug has been masked previously because we weren't getting the
IT state bits at exception entry right anyway.)
Also use the proper cpsr_read()/cpsr_write() interface to update
the CPSR rather than manipulating CPUState fields directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a configure check for the existence of linux/fiemap.h and the
IOC_FS_FIEMAP ioctl. This fixes a compilation failure on Linux
systems which don't have that header file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There are some bits in the code which were used to store the commandline for
the semihosting call. These bits are now write-only and can be removed.
Signed-off-by: Wolfgang Schildbach <wschi@dolby.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
The code in the linux-user ARM nwfpe emulation was incorrectly
checking only for quiet NaNs when it should have been checking
for any kind of NaN. This is probably because the code in
question was taken from the Linux kernel, whose copy of the
softfloat library had been modified so that float*_is_nan()
returned true for all NaNs, not just quiet ones. The qemu
equivalent function is float*_is_any_nan(), so use that.
NB that this code is really obsolete since nobody uses FPE
for actual arithmetic now; this is just cleanup following
the recent renaming of the NaN related functions.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Implement the FS_IOC_FIEMAP ioctl using the new support for
custom handling of ioctls; this is needed because the struct
that is passed includes a variable-length array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Some ioctls (for example FS_IOC_FIEMAP) use structures whose size is
not constant. The generic argument conversion code in do_ioctl()
cannot handle this, so add support for implementing a special-case
handler for a particular ioctl which does the conversion itself.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Implement the missing syscalls sync_file_range and sync_file_range2.
The latter in particular is used by newer versions of apt on Ubuntu
for ARM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
The softfloat functions float*_is_nan() were badly misnamed,
because they return true only for quiet NaNs, not for all NaNs.
Rename them to float*_is_quiet_nan() to more accurately reflect
what they do.
This change was produced by:
perl -p -i -e 's/_is_nan/_is_quiet_nan/g' $(git grep -l is_nan)
(with the results manually checked.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct ldrexd and strexd code to always read and write the
high word of the 64-bit value from addr+4.
Also make ldrexd and strexd agree that for a 64 bit value the
address in env->exclusive_addr is that of the low word.
This fixes the issues reported in
https://bugs.launchpad.net/qemu/+bug/670883
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Restore the VFP registers from the ucontext on return from a signal
handler in linux-user mode. This means that signal handlers cannot
accidentally corrupt the interrupted code's VFP state, and allows
them to deliberately modify the state via the ucontext structure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
For ARM linux-user mode signal handlers, fill in the ucontext with
VFP register contents in the same way that the kernel does. We only
do this for v2 format sigframe (2.6.12 and above); this is actually
bug-for-bug compatible with the older kernels, which don't save and
restore VFP registers either.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
The padding in the target_ucontext_v2 is defined by the size of
the target's sigset_t type, not the host's. (This bug only causes
problems when we start using the uc_regspace[] array to expose
VFP registers to userspace signal handlers.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
n setsockopt, the socket level options are translated to the hosts'
architecture before the real syscall is called, e.g.
TARGET_SO_TYPE -> SO_TYPE. This patch does the same with getsockopt.
Tested on a x86 host emulating MIPS. Without it:-
$ grep getsockopt host.strace
31311 getsockopt(3, SOL_SOCKET, 0x1007 /* SO_??? */, 0xbff17208,
0xbff17204) = -1 ENOPROTOOPT (Protocol not available)
With:-
$ grep getsockopt host.strace
25706 getsockopt(3, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
Whitespace cleanup: Riku Voipio
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Remove an unnecessary local variable from the __get_user() and
__put_user() macros. This avoids confusing compilation failures
if the name of the local variable ('size') happens to be the
same as the variable the macro user is trying to read/write.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Running programs that create large numbers of threads, such as this
snippet from libstdc++'s pthread7-rope.cc:
const int max_thread_count = 4;
const int max_loop_count = 10000;
...
for (int j = 0; j < max_loop_count; j++)
{
...
for (int i = 0; i < max_thread_count; i++)
pthread_create (&tid[i], NULL, thread_main, 0);
for (int i = 0; i < max_thread_count; i++)
pthread_join (tid[i], NULL);
}
in user-mode emulation will quickly run out of memory. This is caused
by a failure to free memory in do_syscall prior to thread exit:
/* TODO: Free CPU state. */
pthread_exit(NULL);
The first step in fixing this is to make all TaskStates used by QEMU
dynamically allocated. The TaskState used by the initial thread was
not, as it was allocated on main's stack. So fix that, free the
cpu_env, free the TaskState, and we're home free, right?
Not exactly. When we create a thread, we do:
ts = qemu_mallocz(sizeof(TaskState) + NEW_STACK_SIZE);
...
new_stack = ts->stack;
...
ret = pthread_attr_setstack(&attr, new_stack, NEW_STACK_SIZE);
If we blindly free the TaskState, then, we yank the current (host)
thread's stack out from underneath it while it still has things to do,
like calling pthread_exit. That causes problems, as you might expect.
The solution adopted here is to let the C library allocate the thread's
stack (so the C library can properly clean it up at pthread_exit) and
provide a hint that we want NEW_STACK_SIZE bytes of stack.
With those two changes, we're done, right? Well, almost. You see,
we're creating all these host threads and their parent threads never
bother to check that their children are finished. There's no good place
for the parent threads to do so. Therefore, we need to create the
threads in a detached state so the parent thread doesn't have to call
pthread_join on the child to release the child's resources; the child
does so automatically.
With those three major changes, we can comfortably run programs like the
above without exhausting memory. We do need to delete 'stack' from the
TaskState structure.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
mmap_reserve() should be called only when RESERVED_VA is enabled.
Otherwise, unmaped virtual address space will never be reusable. This
bug will exhaust virtual address space in extreme conditions.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Rename the members of target_ucontext so that they don't conflict
with possible host macros for ucontext members. This has already
been done for the other targets.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
An empty environment is sometimes useful in user mode.
The new option provides it for linux-user and bsd-user
(darwin-user still has no environment related options).
The patch also adds the documentation for other
environment related options.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Since version 4.4.x, gcc supports additional format attributes.
__attribute__ ((format (gnu_printf, 1, 2)))
should be used instead of
__attribute__ ((format (printf, 1, 2))
because QEMU always uses standard format strings (even with mingw32).
The patch replaces format attribute printf / __printf__ by macro
GCC_FMT_ATTR which uses gnu_printf if supported.
It also removes an #ifdef __GNUC__ (not needed any longer).
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Because of the use of unsigned type, possible errors during
load were ignored.
Fix by using a signed type.
This also avoids a warning with GCC flag -Wtype-limits.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
-1ul is unsigned long, which does not necessarily match abi_ulong
type.
Fix by using abi_long instead.
This also avoids a warning with GCC flag -Wtype-limits.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
On many systems, socklen_t is defined as unsigned. This means that
checks for negative values are not meaningful.
Fix by explicitly casting to a signed integer.
This also avoids some warnings with GCC flag -Wtype-limits.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit 68a1c81686 broke qemu on hosts not
using guest base. It uses reserved_va unconditionally in mmap.c. To
avoid to many #ifdef #endif blocks, define RESERVED_VA as either
reserved_va or 0ul, and use it instead of reserved_va, similarly to what
has been done with guest_base/GUEST_BASE.
This requires moving the PT_INTERP extraction and GUEST_BASE
handling into load_elf_image. Key this off a non-null pointer
argument to receive the interpreter name.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Moving toward a single copy of the elf binary loading code.
Fill in the details of the loaded image into a struct image_info.
Adjust create_elf_tables to read from such structures instead
of from a collection of passed arguments. Don't return error
values from load_elf_interp; always exit(-1) with a message to
stderr. Collect elf_interpreter handling in load_elf_binary
to a common spot.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
At the bottom of the a.out support was the unimplemented load_aout_interp
function. There were other portions of the support that didn't look
right; when I went to look in the Linux kernel for clarification, I found
that the support for such interpreters has been removed from binfmt_elf.
There doesn't seem to be any reason to keep this broken support in qemu.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
There are no supported stack-grows-up targets. We were putting
the guard page at the highest address, i.e. the bottom of the stack.
Use the maximum of host and guest page size for the guard size.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Validate more fields of the elf header. Extract those checks
into two common functions to be used in both load_elf_interp
and load_elf_binary.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
First, adjust load_symbols to accept a load_bias parameter. At the same
time, read the entire section header table in one go, use pread instead
f lseek+read for the symbol and string tables, and properly free
allocated structures on error exit paths.
Second, adjust load_elf_interp to compute load_bias. This requires
finding out the built-in load addresses. Which allows us to honor a
pre-linked interpreter image when possible, and eliminate the hard-coded
INTERP_MAP_SIZE value.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Remove ifdefs from code by defining empty inline functions
when byte swapping isn't needed. Push loops over swapping
arrays of structures into the swapping functions.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The only consideration on this value is the target endianness.
The existing defines were incorrect for alpha and sh4eb.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Define BPRM_BUF_SIZE to 1k and read that amount initially. If the
data we want from the binary is in this buffer, use it instead of
reading from the file again.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Moving some PPC AT_* constants from elfload.c at the same time.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
I caught padzero not properly initializing the .bss segment
on a statically linked Alpha program. Rather than a minimal
patch, replace the gross code with a single mmap+memset.
Share more code between load_elf_interp and load_elf_binary.
Legally, an ELF program need not have just a single .bss;
and PT_LOAD segment can have memsz > filesz.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
There is disagreement between microblaze glibc and the kernel
to what the third arg of signal handlers should point to.
Change QEMU linux-user to match the kernel port. glibc patches
are pending.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
As it is done for qemu-system with "-cpu ?", when cpu_list_id() is missing
for a target, call cpu_list() instead.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When loading a shared library that requires an executable stack,
glibc uses the mprotext PROT_GROWSDOWN flag to achieve this.
We don't support PROT_GROWSDOWN.
Add a special case to handle changing the stack permissions in this way.
Signed-off-by: Paul Brook <paul@codesourcery.com>
There's no _llseek on s390x either. Replace the existing
test for __x86_64__ with a functional test for __NR_llseek.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since we're no longer setting PAGE_RESERVED, there's no need to
implement qemu_malloc via mmap.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Libc will fallback gracefully if pselect6 is not available. Thus put
pselect6 to nowarn until the atomicity issues of the original pselect6
patch are dealt with.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Cc: Michael Casadevall <mcasadevall@ubuntu.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This will allow backends to make intelligent choices about how
to implement GUEST_BASE.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alpha passes oldset by value in a register, and returns the newset
as the return value; as compared to the standard implementation in
which both are passed by reference. This requires being able to
distinguish negative return values that are not errors. Do this in
the same way as the Alpha Linux kernel, by storing a zero in V0 in
the implementation of the syscall.
At the same time, fix a think-o in the regular sigprocmask path in
which we passed the target, rather than the host, HOW value.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alpha passes the signal set in a register, not by reference.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
At the same time, tidy the code wrt MIPS and SH4 which have the
same two register return mechanism. Fix confusion between pipe
and pipe2 with an explicit flags=0, when the guest will not be
using the two register return mechanism.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
189 was allocated in upstream binutils.
0xbaab was the old temporary value. Still used by some tools and the
linux kernel.
I've seen 115 in older gdb versions, but lets ignore that one.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
rlim_t conversion between host and target added.
Otherwise there are some incorrect case like
- RLIM_INFINITY on 32bit target -> 64bit host.
- RLIM_INFINITY on 64bit host -> mips and sparc target ?
- Big value(for 32bit target) on 64bit host -> 32bit target.
One is added into getrlimit, setrlimit, and ugetrlimit. It converts both
RLIM_INFINITY and value bigger than target can hold(>31bit) to RLIM_INFINITY.
Another one is added to guest_stack_size calculation introduced by
703e0e89. The rule is mostly same except the result on the case is keeping
the value of guest_stack_size.
Slightly tested for SH4, and x86_64 -linux-user on x86_64-pc-linux host.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Recalculate Sparc64 CPU flags on interrupts, otherwise some earlier
flags could be stored to pstate.
Refactor PSR/CCR/CWP handling: concentrate the actual
functions to op_helper.c.
Thanks to Igor Kovalenko for reporting.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The usermode PAGE_RESERVED code is not required by the current mmap
implementation, and is already broken when guest_base != 0.
Unfortunately the bsd emulation still uses the old mmap implementation,
so we can't rip it out altogether.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Use an exception plus start_exclusive to implement the compare-and-swap.
This follows the example set by the MIPS and PPC ports.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is a per-cpu flag; there's no need for a spinlock of any kind.
We were also failing to manipulate the flag with $31 as a target reg
and failing to clear the flag on execution of a return-from-interrupt
instruction.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Check TARGET_ABI_BITS, not TARGET_LONG_BITS, when deciding
whether or not the guest needs special 64-bit stat translation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The ABI-specific types used by linux_binprm and image_info
are different after forcing TARGET_ABI32 on. Which means
that the parameters that load_elf_binary_multi sees are not
those that loader_exec passed. This is inherently broken
and is more trouble than it's worth fixing.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2nd arg of page_set_flags() should be start+size, but size.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit c05c7a7306
breaks cross compilation for mips (and other
compilations without CONFIG_INOTIFY1):
make[1]: Entering directory `/qemu/bin/mips'
CC i386-linux-user/syscall.o
cc1: warnings being treated as errors
/qemu/linux-user/syscall.c: In function ‘do_syscall’:
/qemu/linux-user/syscall.c:7067: error: implicit declaration of function ‘sys_inotify_init1’
Cc: Riku Voipio <riku.voipio@nokia.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
ia64 has some strangenesses that need to be workaround:
- it has a __clone2() syscall instead of the using clone() one, with
different arguments, and which is not declared in the usual headers.
- ucontext.uc_sigmask is declared with type long int, while it is
actually of type sigset_t.
- uc_mcontext, uc_sigmask, uc_stack, uc_link are declared using #define,
which clashes with the target_ucontext fields. Change their names to
tuc_*, as already done for some target architectures.
Arrange various declarations so that also non-CPU code can access
them, adjust users.
Move CPU specific code to cpus.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The dynamic linker converts the Linux layout to the AIX layout and is
reentrant so it won't do it a second time if it's already been
converted. In short it work just fine with either register layout.
OTOH, statically linked binaries expect a Linux layout.
Remove code converting the Linux layout to AIX layout so that all
binaries are presented the Linux Layout.
Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The current default stack limit of 512kB is far too small; a fair
number of gcc testsuite failures (for all guests) are directly
attributable to this. Using the -s option in every invocation of
the emulator is annoying to say the least.
A reasonable compromise seems to be to honor the system rlimit.
At least on two Linux distributions, this is set to 8MB and 10MB
respectively. If the system does not limit the stack, then we're
no worse off than before.
At the same time, rename the variable from x86_stack_size and
change the ultimate fallback size from 512kB to 8MB.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
As this is now supported in newer linux kernels.
Signed-off-by: Michael Casadevall <mcasadevall@ubuntu.com>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
New syscall which gets actively used when you have a
fresh kernel.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When building with -DNDEBUG, assert(0) will not stop execution
so it must not be used for abnormal termination.
Use cpu_abort() when in CPU context, abort() otherwise.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't return addresses that aren't properly aligned for the guest,
e.g. when the guest has a larger page size than the host. Don't
return addresses that are outside the virtual address space for the
target, by paying proper attention to the h2g/g2h macros.
At the same time, place the default mapping base for 64-bit guests
(on 64-bit hosts) outside the low 4G. Consistently interpret
mmap_next_start in the guest address space.
Signed-off-by: Richard Henderson <rth@twiddle.net>
As "todo" comment in source code.
And modify restore_sigcontext() to have three args as kernel's does.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On linux/sh4
pipe() return values by r0:r1 as SH C calling convention.
pipe2() return values on memory as traditional unix way.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move userland PALcode handling into linux-user main loop so that
we can send signals from there. This also makes alpha_palcode.c
system-level only, so don't build it for userland. Add defines
for GENTRAP PALcall mapping to signals.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The existing set of IPRs is totally irrelevant to user-mode emulation.
Indeed, they most are irrelevant to implementing kernel-mode emulation,
and would only be relevant to PAL-mode emulation, which I suspect that
no one will ever attempt.
Reducing the set of processor registers reduces the size of the CPU state.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is a reimplementation of prior versions which adds
the ability to define cpu models for contemporary processors.
The added models are likewise selected via -cpu <name>,
and are intended to displace the existing convention
of "-cpu qemu64" augmented with a series of feature flags.
A primary motivation was determination of a least common
denominator within a given processor class to simplify guest
migration. It is still possible to modify an arbitrary model
via additional feature flags however the goal here was to
make doing so unnecessary in typical usage. The other
consideration was providing models names reflective of
current processors. Both AMD and Intel have reviewed the
models in terms of balancing generality of migration vs.
excessive feature downgrade relative to released silicon.
This version of the patch replaces the prior hard wired
definitions with a configuration file approach for new
models. Existing models are thus far left as-is but may
easily be transitioned to (or may be overridden by) the
configuration file representation.
Proposed new model definitions are provided here for current
AMD and Intel processors. Each model consists of a name
used to select it on the command line (-cpu <name>), and a
model_id which corresponds to a least common denominator
commercial instance of the processor class.
A table of names/model_ids may be queried via "-cpu ?model":
:
x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron)
x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron)
x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron)
x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7)
x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2)
x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2)
:
Also added is "-cpu ?dump" which exhaustively outputs all config
data for all defined models, and "-cpu ?cpuid" which enumerates
all qemu recognized CPUID feature flags.
The pseudo cpuid flag 'check' when added to the feature flag list
will warn when feature flags (either implicit in a cpu model or
explicit on the command line) would have otherwise been quietly
unavailable to a guest:
# qemu-system-x86_64 ... -cpu Nehalem,check
warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000]
warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000]
A similar 'enforce' pseudo flag exists which in addition
to the above causes qemu to error exit if requested flags are
unavailable.
Configuration data for a cpu model resides in the target config
file which by default will be installed as:
/usr/local/etc/qemu/target-<arch>.conf
The format of this file should be self explanatory given the
definitions for the above six models and essentially mimics
the structure of the static x86_def_t x86_defs.
Encoding of cpuid flags names now allows aliases for both the
configuration file and the command line which reconciles some
Intel/AMD/Linux/Qemu naming differences.
This patch was tested relative to qemu.git.
Signed-off-by: john cooper <john.cooper@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch for linux-user adapts the output of the emulated uname()
syscall to match the configured CPU. Tested with x86, x86-64 and arm
emulation.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Loïc Minier <lool@dooz.org>
CC i386-linux-user/mmap.o
cc1: warnings being treated as errors
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c: In function 'mmap_frag':
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c:253: error: ignoring return value of 'pread', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c: In function 'target_mmap':
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c:477: error: ignoring return value of 'pread', declared with attribute warn_unused_result
make[1]: *** [mmap.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The stat64/fstat64 syscalls are broken for alpha linux-user.
This is because Alpha, even though it is native 64-bits, has a stat64
syscall that is different than regular stat. This means that the
"TARGET_LONG_BITS==64" check in syscall.c isn't enough. Below is
a patch that fixes things for me, although it might not be the cleanest
fix.
This issue keeps sixtrack and fma3d spec2k benchmarks from running.
Signed-off-by: Vince Weaver <vince@csl.cornell.edu>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For what I know DCR is always 32 bits wide, so we should also use uint32_t to
pass it along the stacks.
This fixes a warning when compiling qemu-system-ppc64 with KVM enabled, making
it compile without --disable-werror
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the alternate time base the same way as the default timebase. SPR_ATBL
should return a 64-bit value on 64 bit implementations.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On PPC we have a 64-bit time base. Usually (PPC32) this is accessed using
two separate 32 bit SPR accesses to SPR_TBU and SPR_TBL.
On PPC64 the SPR_TBL register acts as 64 bit though, so we get the full
64 bits as return value. If we only take the lower ones, fine. But Linux
wants to see all 64 bits or it breaks.
This patch makes PPC64 Linux work even after TB crossed the 32-bit boundary,
which usually happened a few seconds after bootup.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alpha always used 32-bit uids, but never renamed the syscalls
to match i386 when 32-bit uids were added there. This enables
the proper bits in syscall.c.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There's no sense in separately declaring target_{elf_greg,uid,gid,pid}_t
for every architecture. Just declare them once with appropriate
USE_UID16 handling.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Force_sig should be always called with TARGET_ signals.
Not that it really matters with SEGV, so this patch is
just for cleanup and improving consistency.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
mmap_lock() can be called while tb_lock() is being held. To
avoid deadlock when one thread is holding mmap_lock and another
tb_lock, _always_ lock first tb_lock().
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
1. Add correct definitions of error numbers.
2. Implement SYS_osf_sigprocmask
3. Implement SYS_osf_get/setsysinfo for IEEE_FP_CONTROL.
This last requires exposing the FPCR value to do_syscall.
Since this value is actually split up into the float_status,
expose routines from helper.c to access it.
Finally, also add a float_exception_mask field to float_status.
We don't actually use it to control delivery of exceptions to
the emulator yet, but simply hold the value that we placed there
when loading/storing the FPCR.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In a bunch of places, 64 is used as value of _NSIG but it's wrong
at least on MIPS were _NSIG is 128.
Based on a patch from Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The variable CP0_LLAddr represent the full lladdr, not the actual
register value, which is only part of this value and depends on the
CPU.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
