If we access a register via the QEMU memory inspection commands (e.g.
"xp") rather than from guest code, we won't have a CPU context.
Gracefully fail to access the register in that case, rather than
crashing.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
"opp->nb_irqs-1" would have been a minor coding style error,
but putting in one space but not the other makes it look
confusingly like a numeric literal "-1".
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
It's in the address range that normally contains a magic redirection
to the CPU-specific region of the curretn CPU, but it isn't actually
a per-CPU register. On real hardware BRR1 shows up only at 0x40000,
not at 0x60000 or other non-magic per-CPU areas. Plus, this makes
it possible to read the register on the QEMU command line with "xp".
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Previously only the spurious vector was sized appropriately
to the openpic model.
Also, instances of "IPVP_VECTOR(opp->spve)" were replace with
just "opp->spve", as opp->spve is already just a vector and not
an IVPR.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
I could not find this register in any spec (FSL, IBM, or OpenPIC)
and the code doesn't do anything with it but initialize, save,
or restore it.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Deefine symbolic names for some register bits, and use some that
have already been defined.
Also convert some register values from hex to decimal when it improves
readability.
IPVP_PRIORITY_MASK is corrected from (0x1F << 16) to (0xF << 16), in
conjunction with making wider use of the symbolic name. I looked at
Freescale and IBM MPIC docs and at the base OpenPIC spec, and all three
had priority as 4 bits rather than 5. Plus, the magic nubmer that is
being replaced with symbolic values treated the field as 4 bits wide.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add support for compiling for GCOV test coverage, enabled
with '--enable-gcov' during configure.
Test coverage will be reported after each test.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
pc-testdev.c cannot be compiled with MinGW (and other non POSIX hosts):
CC i386-softmmu/hw/i386/../pc-testdev.o
qemu/hw/i386/../pc-testdev.c:38:22: warning: sys/mman.h: file not found
qemu/hw/i386/../pc-testdev.c: In function ‘test_flush_page’:
qemu/hw/i386/../pc-testdev.c:103: warning: implicit declaration of function ‘mprotect’
...
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The interface to normalizeRoundAndPackFloat64 requires that the
high bit be clear. Perform one shift-right-and-jam if needed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* kraxel/acpi.2:
apci: assign memory regions to ich9 lpc device
apci: assign memory regions to piix4 acpi device
acpi: autoload dsdt
configure: also symlink *.aml files
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The spice_server pointer is a global variable and
vm_change_state_handler() therefore does not use its opaque parameter.
The vm change state handler is added with a pointer to the spice_server
pointer. This is useless and we probably would not want 2 levels of
pointers.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Uri Lublin <uril@redhat.com>
instead use the correct headers that define these functions.
Requested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: John Spencer <maillist-qemu@barfooze.de>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This typically reduces the size from 512 bytes to 128 bytes.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
commit 9b9c37c364 always assume sparcv9,
the others are no longer supported. Remove --sparc_cpu option from the
configure list.
Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
sys/mman.h is not needed (tested on Linux) and unavailable for MinGW,
so remove it.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
pc_fw_add_pflash_drv() ignores qemu_find_file() failure, and happily
creates a drive without a medium.
When pc_system_flash_init() asks for its size, bdrv_getlength() fails
with -ENOMEDIUM, which isn't checked either. It fails relatively
cleanly only because -ENOMEDIUM isn't a multiple of 4096:
$ qemu-system-x86_64 -S -vnc :0 -bios nonexistant
qemu: PC system firmware (pflash) must be a multiple of 0x1000
[Exit 1 ]
Fix by handling the qemu_find_file() failure.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Prehistoric leftover, zap it. We poweroff via acpi these days.
And having a port (0x501,0x502) where any random guest write will make
qemu exit -- with no way to turn it off -- is a bad joke anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a test device which supports the kvmctl ioports,
so one can run the KVM unittest suite.
Intended Usage:
qemu-system-x86_64 -nographic \
-device pc-testdev \
-device isa-debug-exit,iobase=0xf4,iosize=0x04 \
-kernel /path/to/kvm/unittests/msr.flat
Where msr.flat is one of the KVM unittests, present on a
separate repo,
git://git.kernel.org/pub/scm/virt/kvm/kvm-unit-tests.git
[ kraxel: more memory api + qom fixes ]
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When present it makes qemu exit on any write.
Mapped to port 0x501 by default.
Without this patch Anthony doesn't allow me to
remove the bochs bios debug ports because his
test suite uses this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 586502189e breaks libvirt pty
support because it tried to figure the pts name from stderr output.
Fix this by moving the label to the end of the line, this way the
libvirt parser does still recognise the message. libvirt looks
for "char device redirected to ${ptsname}<whitespace>".
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The hw/dataplane/vring.c code includes linux/virtio_ring.h. Ensure that
we use linux-headers/ instead of the system-wide headers, which may be
out-of-date on older distros.
This resolves the following build error on Debian 6:
CC hw/dataplane/vring.o
cc1: warnings being treated as errors
hw/dataplane/vring.c: In function 'vring_enable_notification':
hw/dataplane/vring.c:71: error: implicit declaration of function 'vring_avail_event'
hw/dataplane/vring.c:71: error: nested extern declaration of 'vring_avail_event'
hw/dataplane/vring.c:71: error: lvalue required as left operand of assignment
Note that we now build dataplane/ for each target instead of only once.
There is no way around this since linux-headers/ is only available for
per-target objects - and it's how virtio, vfio, kvm, and friends are
built.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Incremental builds added new lines to that file each time when configure
was run.
Now a new file with a comment line is written.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
TCI no longer compiled after commit 76cad71136.
The TCI disassembler depends on data structures which are different for
each QEMU target, so it cannot be compiled as a universal-obj today.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
savevm.c suffers from the same problem as some other files.
Some years ago savevm.c was created from vl.c, moving some
code from there into a separate file. At that time, all
includes were just copied from vl.c to savevm.c, without
checking which ones are needed and which are not.
But actually most of that stuff is _not_ needed. More, some
stuff is wrong, for example, *BSD #ifdef'ery around <util.h>
vs <libutil.h> - for one, it fails to build on Debian/kFreebsd.
Just remove all this. Maybe there's a possibility to clean
it up further - like removing <windows.h> (and maybe including
winsock.h for htons etc), and maybe it's possible to remove
some internal #includes too, but I didn't check this.
While at it, remove duplicate #include of qemu/timer.h.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Curses display requires stdin/out to stay on the terminal,
so -daemonize makes no sense in this case. Instead of
leaving display uninitialized like is done since 995ee2bf46,
explicitly detect this case earlier and error out.
-nographic can actually be used with -daemonize, by redirecting
everything to a null device, but the problem is that according
to documentation and historical behavour, -nographic redirects
guest ports to stdin/out, which, again, makes no sense in case
of -daemonize. Since -nographic is a legacy option, don't bother
fixing this case (to allow -nographic and -daemonize by redirecting
guest ports to null instead of stdin/out in this case), but disallow
it completely instead, to stop garbling host terminal.
If no display display needed and user wants to use -nographic,
the right way to go is to use
-serial null -parallel null -monitor none -display none -vga none
instead of -nographic.
Also prevent the same issue -- it was possible to get garbled
host tty after
-nographic -daemonize
and it is still possible to have it by using
-serial stdio -daemonize
Fix this by disallowing opening stdio chardev when -daemonize
is specified.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 7f6f0ae5b9 added two assertions.
One of these assertions is not needed:
The pointer ts is never NULL because it is initialized with the
address of an array element.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For the error case such as SD_RES_NO_SPACE, we shouldn't update the inode bitmap
to avoid the scenario that the object is allocated but wasn't created at the
server side. This will result in VM's IO error on the failed object.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit fbcad04d6b added fprintf statements
with wrong format specifiers.
GetLastError() returns a DWORD which is unsigned long, so %lu must be used.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-img will complain when qcow or qcow2
size overflow for 64 bits, report the right
message in this condition.
$./qemu-img create -f qcow2 /tmp/foo 0x10000000000000000
before change:
qemu-img: Invalid image size specified! You may use k, M, G or T suffixes for
qemu-img: kilobytes, megabytes, gigabytes and terabytes.
after change:
qemu-img: Image size must be less than 8 EiB!
[Resolved conflict with a9300911 goto removal -- Stefan]
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
if value to be translated is larger than INT64_MAX,
this function will not be convenient for caller to
be aware of it, so change a little for this.
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, all unknown requests are treated as VIRTIO_BLK_T_IN
Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-blk-data-plane feature is easy to integrate into
hw/virtio-blk.c. The data plane can be started and stopped similar to
vhost-net.
Users can take advantage of the virtio-blk-data-plane feature using the
new -device virtio-blk-pci,x-data-plane=on property.
The x-data-plane name was chosen because at this stage the feature is
experimental and likely to see changes in the future.
If the VM configuration does not support virtio-blk-data-plane an error
message is printed. Although we could fall back to regular virtio-blk,
I prefer the explicit approach since it prompts the user to fix their
configuration if they want the performance benefit of
virtio-blk-data-plane.
Limitations:
* Only format=raw is supported
* Live migration is not supported
* Block jobs, hot unplug, and other operations fail with -EBUSY
* I/O throttling limits are ignored
* Only Linux hosts are supported due to Linux AIO usage
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio-blk-data-plane is a subset implementation of virtio-blk. It only
handles read, write, and flush requests. It does this using a dedicated
thread that executes an epoll(2)-based event loop and processes I/O
using Linux AIO.
This approach performs very well but can be used for raw image files
only. The number of IOPS achieved has been reported to be several times
higher than the existing virtio-blk implementation.
Eventually it should be possible to unify virtio-blk-data-plane with the
main body of QEMU code once the block layer and hardware emulation is
able to run outside the global mutex.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Two slightly different versions of a patch to conditionally set
VIRTIO_BLK_F_CONFIG_WCE through the "config-wce" qdev property have been
applied (ea776abca and eec7f96c2). David Gibson
<david@gibson.dropbear.id.au> noticed that the "config-wce"
property is broken as a result and fixed it recently.
The fix sets the host_features VIRTIO_BLK_F_CONFIG_WCE bit from a qdev
property. Unfortunately, the virtio device then has no chance to test
for the presence of the feature bit during virtio_blk_init().
Therefore, reinstate the VirtIOBlkConf->config_wce flag. Drop the
duplicate qdev property to set the host_features bit. The
VirtIOBlkConf->config_wce flag will be used by virtio-blk-data-plane in
a later patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qemu_iovec_concat() function copies a subset of a QEMUIOVector. The
new qemu_iovec_concat_iov() function does the same for a iov/cnt pair.
It is easy to define qemu_iovec_concat() in terms of
qemu_iovec_concat_iov(). The existing code is mostly unchanged, except
for the assertion src->size >= soffset, which cannot be efficiently
checked upfront on a iov/cnt pair. Instead we assert upon hitting the
end of src with an unsatisfied soffset.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The iov_discard_front/back() functions remove data from the front or
back of the vector. This is useful when peeling off header/footer
structs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The IOQueue has a pool of iocb structs and a function to add new
read/write requests. Multiple requests can be added before calling the
submit function to actually tell the host kernel to begin I/O. This
allows callers to batch requests and submit them in one go.
The actual I/O is performed using Linux AIO.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
