GBPA register can be used to globally abort all
transactions.
It is described in the SMMU manual in "6.3.14 SMMU_GBPA".
ABORT reset value is IMPLEMENTATION DEFINED, it is chosen to
be zero(Do not abort incoming transactions).
Other fields have default values of Use Incoming.
If UPDATE is not set, the write is ignored. This is the only permitted
behavior in SMMUv3.2 and later.(6.3.14.1 Update procedure)
As this patch adds a new state to the SMMU (GBPA), it is added
in a new subsection for forward migration compatibility.
GBPA is only migrated if its value is different from the reset value.
It does this to be backward migration compatible if SW didn't write
the register.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230214094009.2445653-1-smostafa@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The two TCG tests for GICv2 and GICv3 are very heavy weight distros
that take a long time to boot up, especially for an --enable-debug
build. The total code coverage they give is:
Overall coverage rate:
lines......: 11.2% (59584 of 530123 lines)
functions..: 15.0% (7436 of 49443 functions)
branches...: 6.3% (19273 of 303933 branches)
We already get pretty close to that with the machine_aarch64_virt
tests which only does one full boot (~120s vs ~600s) of alpine. We
expand the kernel+initrd boot (~8s) to test both GICs and also add an
RNG device and a block device to generate a few IRQs and exercise the
storage layer. With that we get to a coverage of:
Overall coverage rate:
lines......: 11.0% (58121 of 530123 lines)
functions..: 14.9% (7343 of 49443 functions)
branches...: 6.0% (18269 of 303933 branches)
which I feel is close enough given the massive time saving. If we want
to target any more sub-systems we can use lighter weight more directed
tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230203181632.2919715-1-alex.bennee@linaro.org
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While dozens of files include "cpu.h", only 3 files require
these NVIC helper declarations.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230206223502.25122-12-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no point in using a void pointer to access the NVIC.
Use the real type to avoid casting it while debugging.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-11-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230206223502.25122-9-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230206223502.25122-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Although the 'eabi' field is only used in user emulation where
CPU reset doesn't occur, it doesn't belong to the area to reset.
Move it after the 'end_reset_fields' for consistency.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230206223502.25122-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230206223502.25122-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
arm_v7m_mmu_idx_all() and arm_v7m_mmu_idx_for_secstate_and_priv()
are only used for system emulation in m_helper.c.
Move the definitions to avoid prototype forward declarations.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Manually convert to OBJECT_DECLARE_SIMPLE_TYPE() macro,
similarly to automatic conversion from commit 8063396bf3
("Use OBJECT_DECLARE_SIMPLE_TYPE when possible").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* catch [accel] entry without accelerator
* target/i386: various fixes for BMI and ADX instructions
* make the contents of meson-buildoptions.sh stable
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmPpDTcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroODWAgAhWi0XSBe91+34ahQqx6JoLStNX9e
xy1Cm/5LPDrDquD/4T6gnzb1Min/X2AsVu9c+VIbuHbL/rFc7aNIEL6c7KzwSFLs
vEDF7tSnlIMK0ClDsDYBz7HUIgBgqE2crAJmTJus2Cqd+Ef5bMxhQi5Imrk6qtmO
HRdVYEGasJ7CO50oUB91AMrNInWQw0qBnBOB8TnwTLTcvE1txa+xnZuZgQA2HrGX
OweLdKRcYPvRYvBB3wLMbwqEKbD1eYbdbNt7T2KkuVQpYcgfoCpayHIIMroD+hvu
BImmG9wWieDKH4Brs765gH6/3VF5UZKbgDQo9Wz+W/5QqnqRSsOYBiMkmA==
=G3PN
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* block/iscsi: fix double-free on BUSY or similar statuses
* catch [accel] entry without accelerator
* target/i386: various fixes for BMI and ADX instructions
* make the contents of meson-buildoptions.sh stable
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmPpDTcUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroODWAgAhWi0XSBe91+34ahQqx6JoLStNX9e
# xy1Cm/5LPDrDquD/4T6gnzb1Min/X2AsVu9c+VIbuHbL/rFc7aNIEL6c7KzwSFLs
# vEDF7tSnlIMK0ClDsDYBz7HUIgBgqE2crAJmTJus2Cqd+Ef5bMxhQi5Imrk6qtmO
# HRdVYEGasJ7CO50oUB91AMrNInWQw0qBnBOB8TnwTLTcvE1txa+xnZuZgQA2HrGX
# OweLdKRcYPvRYvBB3wLMbwqEKbD1eYbdbNt7T2KkuVQpYcgfoCpayHIIMroD+hvu
# BImmG9wWieDKH4Brs765gH6/3VF5UZKbgDQo9Wz+W/5QqnqRSsOYBiMkmA==
# =G3PN
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 12 Feb 2023 16:00:55 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
libqtest: ensure waitpid() is only called once
libqtest: split qtest_spawn_qemu function
target/i386: fix ADOX followed by ADCX
target/i386: Fix C flag for BLSI, BLSMSK, BLSR
target/i386: Fix BEXTR instruction
tests/tcg/i386: Introduce and use reg_t consistently
vl: catch [accel] entry without accelerator
block/iscsi: fix double-free on BUSY or similar statuses
remove unnecessary extern "C" blocks
build: make meson-buildoptions.sh stable
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This has been replaced by the 'password-secret' option,
which references a 'secret' object instance.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Support for referencing secret objects was added in
commit b189346eb1
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Jan 21 14:19:21 2016 +0000
iscsi: add support for getting CHAP password via QCryptoSecret API
The existing 'password' option is overdue for deprecation and
subsequent removal.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'password-secret' option was added
commit b189346eb1
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Jan 21 14:19:21 2016 +0000
iscsi: add support for getting CHAP password via QCryptoSecret API
but was not mentioned in the command line docs
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since the TLS backend can read more data from the underlying QIOChannel
we introduce a minimal child GSource to notify if we still have more
data available to be read.
Signed-off-by: Antoine Damhet <antoine.damhet@shadow.tech>
Signed-off-by: Charles Frey <charles.frey@shadow.tech>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The new `qcrypto_tls_session_check_pending` function allows the caller
to know if data have already been consumed from the backend and is
already available.
Signed-off-by: Antoine Damhet <antoine.damhet@shadow.tech>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
* Improve the handling of the libdw library
* Deprecate --enable-gprof builds and remove them from CI
* Remove the deprecated "sga" device
* Some header #include clean-ups
* Make qtests more flexible with regards to missing devices
* Some small s390x-related fixes/improvements
-----BEGIN PGP SIGNATURE-----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=GNLD
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-02-14' of https://gitlab.com/thuth/qemu into staging
* Bump minimum Clang version to 10.0
* Improve the handling of the libdw library
* Deprecate --enable-gprof builds and remove them from CI
* Remove the deprecated "sga" device
* Some header #include clean-ups
* Make qtests more flexible with regards to missing devices
* Some small s390x-related fixes/improvements
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmPra8ARHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbW5zQ/+LRyPlCB9/Zz+40QUNIl9M9pcpjwCno9w
# pWIeOXMftBu8vCa/+o58Y22NzmWq7cFypfsIvjrlCqCIZQx1shez5+bvE/ZSyECd
# vy3I+ybKRSaXgE/ighAifwOR7eOhqLBHyXJkAN5grMx0kuu3oKqXBpyJNqTHjq6o
# VgKTu8+o7Ddb+CuzwGahKzyzTqD7gY+9+Y5Gnlq0DvbNEq9k6tcjQZ8P3MqOmjWJ
# WnBZH9Rrq9itnlcZXMl8xY6w572GLTq+aJbtc/iS3cvNV2WMwTFMj4lJZjuSkzX0
# af2Aw/4e23uKpjnD44cI17XkRSQbUcT756b3KtdHlKHRvKSL+zwjsraimEN6sleO
# Y5ibaFamqvoR7IuOqJ7/cbpBN+P46JU1ryQ17BvAN/HnNSEmkn6FLGtDhyvabIHq
# C69TBb1IX0GApo0txeg0d0nFrSvVACpX+/D1bRedmI5SD3EukTcBr6UELiBqXqLH
# O75tWQydMwxuP8ay7/zU4g4PApif/RBbR41pw+oVsQNIx1p5QilNy069m/V2nT3k
# gMciT2+U8bIu3GUULuW0zPuD/o88XJk+ocjFHIE8BbwCx41iL6jKhM+xHwUeIkv4
# dZT+8BlbBzNZlSAgpMu9wt0T2hyHrKYtmLxvrVi/qq6ZyO7ZUVBfOGfqAd3QtvQX
# hIERpFunzFY=
# =GNLD
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 14 Feb 2023 11:08:48 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-02-14' of https://gitlab.com/thuth/qemu: (22 commits)
hw/s390x/event-facility: Replace DO_UPCAST(SCLPEvent) by SCLP_EVENT()
tests/tcg/s390x: Use -nostdlib for softmmu tests
tests/qtest: Don't build virtio-serial-test.c if device not present
tests/qtest: bios-tables-test: Skip if missing configs
tests/qemu-iotests: Require virtio-scsi-pci
tests/qtest: Do not include hexloader-test if loader device is not present
tests/qtest: Check for devices in bios-tables-test
tests/qtest: drive_del-test: Skip tests that require missing devices
tests/qtest: Skip unplug tests that use missing devices
test/qtest: Fix coding style in device-plug-test.c
tests/qtest: hd-geo-test: Check for missing devices
tests/qtest: Add dependence on PCIE_PORT for virtio-net-failover.c
tests/qtest: Do not run lsi53c895a test if device is not present
tests/qtest: Skip PXE tests for missing devices
Do not include "qemu/error-report.h" in headers that do not need it
include/hw: Do not include "hw/registerfields.h" in headers that don't need it
hw/misc/sga: Remove the deprecated "sga" device
tests/qtest/npcm7xx_pwm-test: Be less verbose unless V=2
build: deprecate --enable-gprof builds and remove from CI
meson: Disable libdw for static builds by default
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the SCLP_EVENT() QOM type-checking macro to avoid DO_UPCAST().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230212225144.58660-16-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The code currently uses -nostartfiles, but this does not prevent
linking with libc. On Fedora there is no cross-libc, so the linking
step fails.
Fix by using the more comprehensive -nostdlib (that's also what
probe_target_compiler() checks for as well).
Fixes: 503e549e44 ("tests/tcg/s390x: Test unaligned accesses to lowcore")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230131182057.2261614-1-iii@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The virtconsole device might not be present in the QEMU build that is
being tested.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230213210738.9719-5-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If we build with --without-default-devices, CONFIG_HPET and
CONFIG_PARALLEL are set to N, which makes the respective devices go
missing from acpi tables.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230208194700.11035-13-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Check that virtio-scsi-pci is present in the QEMU build before running
the tests.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230208194700.11035-12-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Do not include tests that require devices that are not available in
the QEMU build.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230208194700.11035-10-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We should not mix declarations and statements in QEMU code.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-7-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Don't include tests that require devices not available in the QEMU
binary.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230208194700.11035-6-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This test depends on the presence of the pcie-root-port device. Add a
build time dependency.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-4-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests are built once for all the targets, so as long as one QEMU
binary is built with CONFIG_LSI_SCSI_PCI=y, this test will
run. However some binaries might not include the device. So check this
again in runtime.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-3-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Check if the devices we're trying to add are present in the QEMU
binary. They could have been removed from the build via Kconfig or the
--without-default-devices option.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-2-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Include it in the .c files instead that use the error reporting
functions.
Message-Id: <20230210111931.1115489-1-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Include "hw/registerfields.h" in the .c files instead (if needed).
Message-Id: <20230210112315.1116966-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's been deprecated since QEMU v6.2, so it should be OK to
finally remove this now.
Message-Id: <20230209161540.1054669-1-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The npcm7xx_pwm-test produces a lot of output at V=1, which
means that on our CI tests the log files exceed the gitlab
500KB limit. Suppress the messages about exactly what is
being tested unless at V=2 and above.
This follows the pattern we use with qom-test.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230209135047.1753081-1-peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As gprof relies on instrumentation you rarely get useful data compared
to a real optimised build. Lets deprecate the build option and
simplify the CI configuration as a result.
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1338
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230131094224.861621-1-alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Static QEMU build fails on Debian Bullseye:
/usr/bin/ld: /usr/lib/x86_64-linux-gnu/libdw.a(debuginfod-client.o): in function `__libdwfl_debuginfod_init':
(.text.startup+0x17): undefined reference to `dlopen'
The reason is that pkg-config does not suggest -ldl for libdw, and
adding --extra-ldflags="-ldl" resolves the issue. However, static
linking with libdw is an unclear topic:
* Linux perf does it.
* Debian's libdw-dev description says:
Only link to the static version for special cases and when you
don't need anything from the ebl backends.
* As the error message above indicates, -ldl is also needed for
debuginfod support.
The functionality provided by libdw is needed for analyzing performance
of JITed code, which is mostly useful to developers and researchers.
Therefore, in order to avoid unpleasant surprises for people who don't
need this, simply disable libdw for static builds by default. It can
still be enabled explicitly if needed.
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230210005208.438142-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add the missing meson infrastructure bits for the new libdw
dependency. Model them after the existing capstone knobs.
Fixes: 7c10cb38cc ("accel/tcg: Add debuginfo support")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230210005208.438142-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Anthony Perard recently reported some problems with Clang v6.0 from
Ubuntu Bionic (with regards to the -Wmissing-braces configure test).
Since we're not officially supporting that version of Ubuntu anymore,
we should better bump our minimum version check in the configure script
instead of using our time to fix problems of unsupported compilers.
According to repology.org, our supported distros ship these versions
of Clang (looking at the highest version only):
Fedora 36: 14.0.5
CentOS 8 (RHEL-8): 12.0.1
Debian 11: 13.0.1
OpenSUSE Leap 15.4: 13.0.1
Ubuntu LTS 20.04: 12.0.0
FreeBSD Ports: 15.0.7
NetBSD pkgsrc: 15.0.7
Homebrew: 15.0.7
MSYS2 mingw: 15.0.7
Haiku ports: 12.0.1
While it seems like we could update to v12.0.0 from that point of view,
the default version on Ubuntu 20.04 is still v10.0, and we use that for
our CI tests based via the tests/docker/dockerfiles/ubuntu2004.docker
file.
Thus let's make v10.0 our minimum version now (which corresponds to
Apple Clang version v12.0). The -Wmissing-braces check can then be
removed, too, since both our minimum GCC and our minimum Clang version
now handle this correctly.
Message-Id: <20230131180239.1582302-1-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Hi
In this PULL request:
- Added to leonardo fixes:
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Please apply.
[take 2]
- rebase to latest upstream
- fix compilation of linux-user (if have_system was missing) (me)
- cleanup multifd_load_cleanup(leonardo)
- Document RAM flags (me)
Please apply.
[take 1]
This are all the reviewed patches for migration:
- AVX512 support for xbzrle (Ling Xu)
- /dev/userfaultd support (Peter Xu)
- Improve ordering of channels (Peter Xu)
- multifd cleanups (Li Zhang)
- Remove spurious files from last merge (me)
Rebase makes that to you
- Fix mixup between state_pending_{exact,estimate} (me)
- Cache RAM size during migration (me)
- cleanup several functions (me)
Please apply.
-----BEGIN PGP SIGNATURE-----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=TDnO
-----END PGP SIGNATURE-----
Merge tag 'migration-20230213-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request (take3)
Hi
In this PULL request:
- Added to leonardo fixes:
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Please apply.
[take 2]
- rebase to latest upstream
- fix compilation of linux-user (if have_system was missing) (me)
- cleanup multifd_load_cleanup(leonardo)
- Document RAM flags (me)
Please apply.
[take 1]
This are all the reviewed patches for migration:
- AVX512 support for xbzrle (Ling Xu)
- /dev/userfaultd support (Peter Xu)
- Improve ordering of channels (Peter Xu)
- multifd cleanups (Li Zhang)
- Remove spurious files from last merge (me)
Rebase makes that to you
- Fix mixup between state_pending_{exact,estimate} (me)
- Cache RAM size during migration (me)
- cleanup several functions (me)
Please apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmPppZYACgkQ9IfvGFhy
# 1yPLvQ//f8D6txzFawaxrfzpSAHnq70Gx+B5GkIwgwB8nlPIC3QELEf5uooM/RGA
# nSaUctUNOJUWqVGK3vp3jDIep02DzdIUrlOfy96h+pnTMpyMWFC2BexDfveVMUId
# dw8WCWZkGCFDfIWuKF+GA8eTu6HM1ouzgCJrRmPtCqsikzAPkogPm60hQSTAQxm9
# Kzdp1SXV1HmyA440vy8rtYf71BKpvb9OJFmwgZ+ICy0rc1aUmgJbKxkwyOgiI2lq
# ONekpbOg7lzlFVAQu1QHTmYN13bsn4uzwUgdifn1PixFQyRE3AVs4jdTmqeLnoPe
# Ac6j8v3pDOw/Xf4kpRWUmhkqTMEJt8/lyneJzu1mQkw0wwiUtDvknFgPG8wJsa+J
# ZQr1cBXQj4IjtkN6+ixF7XYvx3T6pWz0L+/w2+TbFBdLWIrPgFH0yPYjhx7FdDid
# cjUHyS1a0w9ngnXOxRG8+UNHWCpPOUhXeeiyNioogYZNKu77PFxJVDMe3eB6dXAB
# pDfl4P129PloKAPafcz9E6Sxr+lIgrETZmsRJlRz4czg18TxlIukMlDtyrepNWti
# GtIf9xTpP3JKjpHnKbWLaxP5VeFC7kQd0qas4VxD+tDjbJdUZdZMfHcOSS0SMRGe
# q5LVEzMMIPCQJQIqiLEJ0HTUUOtB8i+bGoirNEbDqhLa/oZwPP8=
# =TDnO
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 13 Feb 2023 02:51:02 GMT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20230213-pull-request' of https://gitlab.com/juan.quintela/qemu: (22 commits)
ram: Document migration ram flags
migration/multifd: Move load_cleanup inside incoming_state_destroy
migration/multifd: Join all multifd threads in order to avoid leaks
migration/multifd: Remove unnecessary assignment on multifd_load_cleanup()
migration/multifd: Change multifd_load_cleanup() signature and usage
migration: Postpone postcopy preempt channel to be after main
migration: Add a semaphore to count PONGs
migration: Cleanup postcopy_preempt_setup()
migration: Rework multi-channel checks on URI
Update bench-code for addressing CI problem
AVX512 support for xbzrle_encode_buffer
migration: I messed state_pending_exact/estimate
migration: Make ram_save_target_page() a pointer
migration: Calculate ram size once
migration: Split ram_bytes_total_common() in two functions
migration: Make find_dirty_block() return a single parameter
migration: Simplify ram_find_and_save_block()
util/userfaultfd: Support /dev/userfaultfd
linux-headers: Update to v6.1
multifd: Remove some redundant code
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
0x80 is RAM_SAVE_FLAG_HOOK, it is in qemu-file now.
Bigger usable flag is 0x200, noticing that.
We can reuse RAM_SAVe_FLAG_FULL.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Currently running migration_incoming_state_destroy() without first running
multifd_load_cleanup() will cause a yank error:
qemu-system-x86_64: ../util/yank.c:107: yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.
(core dumped)
The above error happens in the target host, when multifd is being used
for precopy, and then postcopy is triggered and the migration finishes.
This will crash the VM in the target host.
To avoid that, move multifd_load_cleanup() inside
migration_incoming_state_destroy(), so that the load cleanup becomes part
of the incoming state destroying process.
Running multifd_load_cleanup() twice can become an issue, though, but the
only scenario it could be ran twice is on process_incoming_migration_bh().
So removing this extra call is necessary.
On the other hand, this multifd_load_cleanup() call happens way before the
migration_incoming_state_destroy() and having this happening before
dirty_bitmap_mig_before_vm_start() and vm_start() may be a need.
So introduce a new function multifd_load_shutdown() that will mainly stop
all multifd threads and close their QIOChannels. Then use this function
instead of multifd_load_cleanup() to make sure nothing else is received
before dirty_bitmap_mig_before_vm_start().
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Current approach will only join threads that are still running.
For the threads not joined, resources or private memory are always kept in
the process space and never reclaimed before process end, and this risks
serious memory leaks.
This should usually not represent a big problem, since multifd migration
is usually just ran at most a few times, and after it succeeds there is
not much to be done before exiting the process.
Yet still, it should not hurt performance to join all of them.
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Before assigning "p->quit = true" for every multifd channel,
multifd_load_cleanup() will call multifd_recv_terminate_threads() which
already does the same assignment, while protected by a mutex.
So there is no point doing the same assignment again.
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Since it's introduction in commit f986c3d256 ("migration: Create multifd
migration threads"), multifd_load_cleanup() never returned any value
different than 0, neither set up any error on errp.
Even though, on process_incoming_migration_bh() an if clause uses it's
return value to decide on setting autostart = false, which will never
happen.
In order to simplify the codebase, change multifd_load_cleanup() signature
to 'void multifd_load_cleanup(void)', and for every usage remove error
handling or decision made based on return value != 0.
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy with preempt-mode enabled needs two channels to communicate. The
order of channel establishment is not guaranteed. It can happen that the
dest QEMU got the preempt channel connection request before the main
channel is established, then the migration may make no progress even during
precopy due to the wrong order.
To fix it, create the preempt channel only if we know the main channel is
established.
For a general postcopy migration, we delay it until postcopy_start(),
that's where we already went through some part of precopy on the main
channel. To make sure dest QEMU has already established the channel, we
wait until we got the first PONG received. That's something we do at the
start of precopy when postcopy enabled so it's guaranteed to happen sooner
or later.
For a postcopy recovery, we delay it to qemu_savevm_state_resume_prepare()
where we'll have round trips of data on bitmap synchronizations, which
means the main channel must have been established.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
