No host backend support yet, but the interfaces for rotli
are in place. Canonicalize immediate rotate to the left,
based on a survey of architectures, but provide both left
and right shift interfaces to the translators.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already have information about where each guest instructions
representation starts stored in the tcg_ctx->gen_insn_data so we can
rectify the PC for faults. We can re-use this information to annotate
the out_asm output with guest instruction address which makes it a bit
easier to work out where you are especially with longer blocks. A
minor wrinkle is that some instructions get optimised away so we have
to scan forward until we find some actual generated code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200513175134.19619-11-alex.bennee@linaro.org>
This will become useful shortly for providing more information about
output assembly inline. While there fix up the indenting and code
formatting in disas().
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200513175134.19619-9-alex.bennee@linaro.org>
I doubt the well predicted trace event check is particularly special in
the grand context of TCG code execution.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200513175134.19619-8-alex.bennee@linaro.org>
We cannot at present limit a 64-bit guest to a virtual address
space smaller than the host. It will mostly work to ignore this
limitation, except if the guest uses high bits of the address
space for tags. But it will certainly work better, as presently
we can wind up failing to allocate the guest stack.
Widen our user-only page tree to the host or abi pointer width.
Remove the workaround for this problem from target/alpha.
Always validate guest addresses vs reserved_va, as there we
control allocation ourselves.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200513175134.19619-7-alex.bennee@linaro.org>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
object_property_set_description() and
object_class_property_set_description() fail only when property @name
is not found.
There are 85 calls of object_property_set_description() and
object_class_property_set_description(). None of them can fail:
* 84 immediately follow the creation of the property.
* The one in spapr_rng_instance_init() refers to a property created in
spapr_rng_class_init(), from spapr_rng_properties[].
Every one of them still gets to decide what to pass for @errp.
51 calls pass &error_abort, 32 calls pass NULL, one receives the error
and propagates it to &error_abort, and one propagates it to
&error_fatal. I'm actually surprised none of them violates the Error
API.
What are we gaining by letting callers handle the "property not found"
error? Use when the property is not known to exist is simpler: you
don't have to guard the call with a check. We haven't found such a
use in 5+ years. Until we do, let's make life a bit simpler and drop
the @errp parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-8-armbru@redhat.com>
[One semantic rebase conflict resolved]
We currently have target-endian versions of these operations,
but no easy way to force a specific endianness. This can be
helpful if the target has endian-specific operations, or a mode
that swaps endianness.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This new interface will allow targets to probe for a page
and then handle watchpoints themselves. This will be most
useful for vector predicated memory operations, where one
page lookup can be used for many operations, and one test
can avoid many watchpoint checks.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have validated that addr+size does not cross a page boundary.
Therefore we need to validate exactly one page. We can achieve
that passing any value 1 <= x <= size to page_check_range.
Passing 1 will simplify the next patch.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The commentary talks about "in concert with the addresses
assigned in the relevant linker script", except there is no
linker script for softmmu, nor has there been for some time.
(Do not confuse the user-only linker script editing that was
removed in the previous patch, because user-only does not
use this code_gen_buffer allocation method.)
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Partial cleanup from the CONFIG_VECTOR16 removal.
Replace DO_CMP0 with its scalar expansion, a simple negation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Partial cleanup from the CONFIG_VECTOR16 removal.
Replace the DUP* expansions with the scalar argument.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Partial cleanup from the CONFIG_VECTOR16 removal.
Replace the vec* types with their scalar expansions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The comment in tcg-runtime-gvec.c about CONFIG_VECTOR16 says that
tcg-op-gvec.c has eliminated size 8 vectors, and only passes on
multiples of 16. This may have been true of the first few operations,
but is not true of all operations.
In particular, multiply, shift by scalar, and compare of 8- and 16-bit
elements are not expanded inline if host vector operations are not
supported.
For an x86_64 host that does not support AVX, this means that we will
fall back to the helper, which will attempt to use SSE instructions,
which will SEGV on an invalid 8-byte aligned memory operation.
This patch simply removes the CONFIG_VECTOR16 code and configuration
without further simplification.
Buglink: https://bugs.launchpad.net/bugs/1863508
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While 32mb is certainly usable a full system boot ends up flushing the
codegen buffer nearly 100 times. Increase the default on 64 bit hosts
to take advantage of all that spare memory. After this change I can
boot my tests system without any TB flushes.
As we usually run more CONFIG_USER binaries at a time in typical usage
we aren't quite as profligate for user-mode code generation usage. We
also bring the static code gen defies to the same place to keep all
the reasoning in the comments together.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-Id: <20200228192415.19867-5-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no particular reason to use a static codegen buffer on 64 bit
hosts as we have address space to burn. Allow the common CONFIG_USER
case to use the mmap'ed buffers like SoftMMU.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-Id: <20200228192415.19867-4-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Basing the TB cache size on the ram_size was always a little heuristic
and was broken by a1b18df9a4 which caused ram_size not to be fully
realised at the time we initialise the TCG translation cache.
The current DEFAULT_CODE_GEN_BUFFER_SIZE may still be a little small
but follow-up patches will address that.
Fixes: a1b18df9a4
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-Id: <20200228192415.19867-3-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It's easier to read.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200228192415.19867-2-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The bug describes a race whereby cpu_exec_step_atomic can acquire a TB
which is invalidated by a tb_flush before we execute it. This doesn't
affect the other cpu_exec modes as a tb_flush by it's nature can only
occur on a quiescent system. The race was described as:
B2. tcg_cpu_exec => cpu_exec => tb_find => tb_gen_code
B3. tcg_tb_alloc obtains a new TB
C3. TB obtained with tb_lookup__cpu_state or tb_gen_code
(same TB as B2)
A3. start_exclusive critical section entered
A4. do_tb_flush is called, TB memory freed/re-allocated
A5. end_exclusive exits critical section
B2. tcg_cpu_exec => cpu_exec => tb_find => tb_gen_code
B3. tcg_tb_alloc reallocates TB from B2
C4. start_exclusive critical section entered
C5. cpu_tb_exec executes the TB code that was free in A4
The simplest fix is to widen the exclusive period to include the TB
lookup. As a result we can drop the complication of checking we are in
the exclusive region before we end it.
Cc: Yifan <me@yifanlu.com>
Buglink: https://bugs.launchpad.net/qemu/+bug/1863025
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200214144952.15502-1-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeK1CXAAoJEL/70l94x66DXtkIAI6W5wEY0Yme4M9Q5mGc0RV8
uscPLg0wsg88u6xne8ucCiGymvDREym2ii/aVI0Hi5ish84ZMdCrdck9cd+llpMf
+a3slL26AKlOW8WtYSuyAE1RdLFXngeXdwal5KtWPEExJorkDUPTbwhBzQduQK1a
myoHHcbwdd/96v7FvKnfG8jM6KZtHPQQ0i6+6fX4PN44jaULQNjze8GIrRBEwqw5
uCKJFQPBXiVcxKjH5/kzI1vl2hLJbF2ZGVEzX/U8OPZwyGPHIkWquURo8lvUTPfb
ySlNTUTV2CyrN65TBRXQp/mJi44WvME5Jxlf5rNLBaYXPpL0zhmILKn5X5ya4U0=
=TD0Y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
# gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (58 commits)
build-sys: clean up flags included in the linker command line
target/i386: Add the 'model-id' for Skylake -v3 CPU models
qdev: use object_property_help()
qapi/qmp: add ObjectPropertyInfo.default-value
qom: introduce object_property_help()
qom: simplify qmp_device_list_properties()
vl: print default value in object help
qdev: register properties as class properties
qdev: move instance properties to class properties
qdev: rename DeviceClass.props
qdev: set properties with device_class_set_props()
object: return self in object_ref()
object: release all props
object: add object_class_property_add_link()
object: express const link with link property
object: add direct link flag
object: rename link "child" to "target"
object: check strong flag with &
object: do not free class properties
object: add object_property_set_default
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit af0440ae85 moved the qemu_tcg_configure() function,
but introduced extraneous 'include/' in the includes path.
As it is not necessary, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200121110349.25842-11-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We actually want to access the accelerator, not the machine, so
use the current_accel() wrapper instead.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200121110349.25842-10-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not call get_clock_realtime() in tlb_mmu_resize_locked,
but hoist outside of any loop over a set of tlbs. This is
only two (indirect) callers, tlb_flush_by_mmuidx_async_work
and tlb_flush_page_locked, so not onerous.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There's little point in leaving these data structures half initialized,
and relying on a flush to be done during reset.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge into the only caller, but at the same time split
out tlb_mmu_init to initialize a single tlb entry.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will want to be able to flush a tlb without resizing.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No functional change, but the smaller expressions make
the code easier to read.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No functional change, but the smaller expressions make
the code easier to read.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not need the entire CPUArchState to compute these values.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are no users of this function outside cputlb.c,
and its interface will change in the next patch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is only one caller for tlb_table_flush_by_mmuidx. Place
the result at the earlier line number, due to an expected user
in the near future.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In target/arm we will shortly have "too many" mmu_idx.
The current minimum barrier is caused by the way in which
tlb_flush_page_by_mmuidx is coded.
We can remove this limitation by allocating memory for
consumption by the worker. Let us assume that this is
the unlikely case, as will be the case for the majority
of targets which have so far satisfied the BUILD_BUG_ON,
and only allocate memory when necessary.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We currently search both the root and the tcg/ directories for tcg
files:
$ git grep '#include "tcg/' | wc -l
28
$ git grep '#include "tcg[^/]' | wc -l
94
To simplify the preprocessor search path, unify by expliciting the
tcg/ directory.
Patch created mechanically by running:
$ for x in \
tcg.h tcg-mo.h tcg-op.h tcg-opc.h \
tcg-op-gvec.h tcg-gvec-desc.h; do \
sed -i "s,#include \"$x\",#include \"tcg/$x\"," \
$(git grep -l "#include \"$x\""); \
done
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-2-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reduce the amount of preprocessor obfuscation by expanding
the text of each of the functions generated. The result is
only slightly smaller than the original.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the tracing hooks, the inline functions are no longer
so simple. Reduce the amount of preprocessor obfuscation
by expanding the text of each of the functions generated.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are no uses of the *_cmmu names other than the bare wrapping
within the *_code inlines. Therefore rename the functions so we
can drop the inlines.
Use abi_ptr instead of target_ulong in preparation for user-only;
the two types are identical for softmmu.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the tracing hooks, the inline functions are no longer
so simple. Once out-of-line, the current tlb_entry lookup
is redundant with the one in the main load/store_helper.
This also begins the introduction of a new target facing
interface, with suffix *_mmuidx_ra. This is not yet
official because the interface is not done for user-only.
Use abi_ptr instead of target_ulong in preparation for
user-only; the two types are identical for softmmu.
What remains in cpu_ldst_template.h are the expansions
for _code, _data, and MMU_MODE<N>_SUFFIX.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Code movement in an upcoming patch will show that this file
was implicitly depending on tcg.h being included indirectly.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is easy for the atomic helpers to use trace_mem_build_info
directly, without resorting to symbol pasting. For this usage,
we cannot use trace_mem_get_info, because the MemOp does not
support 16-byte accesses.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl37M6gACgkQ+9DbCVqe
KkQ0Rwf/d0lGDPQN1Uf0zqZRQQmDCqWVuqHhZJ5xWDjbyVT2eUwR07TvNZeUKEWX
iO+u6S7Tv91oLjZN5WjhaiuSjtJaEzCdcpkIJAWXLP/lzse37HEwvLBsdg71y+46
LNvBrJRPpQotdb7fjr8RgCwc1qg2Bz15ekSn7XIA175zTMmUsshLJBVhLbGNqrVm
F2UmjB9oFJ0+nzrcEnpFmWw7xvVrX1dImZXv5C2pvuHF7efSjGwiFviTRZgDjOGs
V7HiWRV1QcgTigncncxTMbhMTKTVKK+e7O+y0DZWt/NSrT/yLDy5rcwySpmvu6C+
cRmh/0tMo1KAhiz8Xy8LookhVj6hdA==
=OAkV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging
Various testing and logging updates
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
# gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits)
tests/tcg: ensure we re-configure if configure.sh is updated
trace: replace hand-crafted pattern_glob with g_pattern_match_simple
linux-user: convert target_munmap debug to a tracepoint
linux-user: log page table changes under -d page
linux-user: add target_mmap_complete tracepoint
linux-user: convert target_mmap debug to tracepoint
linux-user: convert target_mprotect debug to tracepoint
travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry
docker: gtester is no longer used
Added tests for close and change of logfile.
Add use of RCU for qemu_logfile.
qemu_log_lock/unlock now preserves the qemu_logfile handle.
Add a mutex to guarantee single writer to qemu_logfile handle.
Cleaned up flow of code in qemu_set_log(), to simplify and clarify.
Fix double free issue in qemu_set_log_filename().
ci: build out-of-tree
travis.yml: Enable builds on arm64, ppc64le and s390x
tests/test-util-filemonitor: Skip test on non-x86 Travis containers
tests/hd-geo-test: Skip test when images can not be created
iotests: Skip test 079 if it is not possible to create large files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_log_lock() now returns a handle and qemu_log_unlock() receives a
handle to unlock. This allows for changing the handle during logging
and ensures the lock() and unlock() are for the same file.
Also in target/tilegx/translate.c removed the qemu_log_lock()/unlock()
calls (and the log("\n")), since the translator can longjmp out of the
loop if it attempts to translate an instruction in an inaccessible page.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-5-robert.foley@linaro.org>
-tb-size fits nicely in the new framework for accelerator-specific options. It
is a very niche option, so insta-deprecate it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the ad-hoc qemu_tcg_configure with generic code invoking QOM
property getters and setters. More properties (and thus more valid
-accel suboptions) will be added in the next patches, which will move
accelerator-related "-machine" options to accelerators.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move everything related to mttcg_enabled in accel/tcg/tcg-all.c,
which will make even more sense when "thread" becomes a QOM property.
For now, initializing mttcg_enabled in the instance_init function
prepares for the next patch, which will only invoke qemu_tcg_configure
when the command line includes a -accel option.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All targets have now migrated away from the old unassigned_access
hook to the new do_transaction_failed hook. This means we can remove
the core-code infrastructure for that hook and the code that calls it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191108173732.11816-1-peter.maydell@linaro.org
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We document this in docs/devel/load-stores.rst so lets follow it. The
32 bit and 64 bit access functions have historically not included the
sign so we leave those as is. We also introduce some signed helpers
which are used for loading immediate values in the translator.
Fixes: 282dffc8
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191021150910.23216-1-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Plugins might allocate per-TB data that then they get passed each
time a TB is executed (via the *userdata pointer).
Notify plugin code every time a code cache flush occurs, so
that plugins can then reclaim the memory of the per-TB data.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We need to keep a local per-cpu copy of the data as other threads may
be running. Currently we can provide insight as to if the access was
IO or not and give the offset into a given device (usually the main
RAMBlock). We store enough information to get details such as the
MemoryRegion which might be useful in later expansions to the API.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
To capture all memory accesses we need hook into all the various
helper functions that are involved in memory operations as well as the
injected inline helper calls. A later commit will allow us to resolve
the actual guest HW addresses by replaying the lookup.
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: drop haddr handling, just deal in vaddr]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for plugin support.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We first inject empty instrumentation from translator_loop.
After translation, we go through the plugins to see what
they want to register for, filling in the empty instrumentation.
If if turns out that some instrumentation remains unused, we
remove it.
This approach supports the following features:
- Inlining TCG code for simple operations. Note that we do not
export TCG ops to plugins. Instead, we give them a C API to
insert inlined ops. So far we only support adding an immediate
to a u64, e.g. to count events.
- "Direct" callbacks. These are callbacks that do not go via
a helper. Instead, the helper is defined at run-time, so that
the plugin code is directly called from TCG. This makes direct
callbacks as efficient as possible; they are therefore used
for very frequent events, e.g. memory callbacks.
- Passing the host address to memory callbacks. Most of this
is implemented in a later patch though.
- Instrumentation of memory accesses performed from helpers.
See the corresponding comment, as well as a later patch.
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: add alloc_tcg_plugin_context, use glib, rm hwaddr]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This will be used by plugins to get the host address
of instructions.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
tb_flush will be called by the plugin module from a safe
work environment. Prepare for that.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: moved inside start/end_exclusive fns + cleanup]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We are going to re-use mem_info later for plugins and will need to
track the mmu_idx for softmmu code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Since 2ac01d6daf, this function does only two things: assert a
lock is held, and call tcg_tb_alloc. It is used exactly once,
and its user has already done the assert.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Clement Deschamps <clement.deschamps@greensocs.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This fixes a segmentation fault in icount mode when executing
from an IO region.
TB is marked as CF_NOCACHE but tb->orig_tb is not initialized
(equals previous value in code_gen_buffer).
The issue happens in cpu_io_recompile() when it tries to invalidate orig_tb.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Clement Deschamps <clement.deschamps@greensocs.com>
Message-Id: <20191022140016.918371-1-clement.deschamps@greensocs.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using uintptr_t instead of target_ulong meant that, for 64-bit guest
and 32-bit host, we truncated the guest address comparator and so may
not hit the tlb when we should.
Fixes: 4811e9095c
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We document this in docs/devel/load-stores.rst so lets follow it. The
32 bit and 64 bit access functions have historically not included the
sign so we leave those as is. We also introduce some signed helpers
which are used for loading immediate values in the translator.
Fixes: 282dffc8
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191021150910.23216-1-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixes the previous TLB_WATCHPOINT patches because we are currently
failing to set cpu->mem_io_pc with the call to cpu_check_watchpoint.
Pass down the retaddr directly because it's readily available.
Fixes: 50b107c5d6
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than rely on cpu->mem_io_pc, pass retaddr down directly.
Within tb_invalidate_phys_page_range__locked, the is_cpu_write_access
parameter is non-zero exactly when retaddr would be non-zero, so that
is a simple replacement.
Recognize that current_tb_not_found is true only when mem_io_pc
(and now retaddr) are also non-zero, so remove a redundant test.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All callers pass false to this argument. Remove it and pass the
constant on to tb_invalidate_phys_page_range__locked.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the merge of notdirty handling into store_helper,
the last user of cpu->mem_io_vaddr was removed.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can use notdirty_write for the write and return a valid host
pointer for this case.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since 9458a9a1df, all readers of the dirty bitmaps wait
for the rcu lock, which means that they wait until the end
of any executing TranslationBlock.
As a consequence, there is no need for the actual access
to happen in between the _prepare and _complete. Therefore,
we can improve things by merging the two functions into
notdirty_write and dropping the NotDirtyInfo structure.
In addition, the only users of notdirty_write are in cputlb.c,
so move the merged function there. Pass in the CPUIOTLBEntry
from which the ram_addr_t may be computed.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is only one caller, tlb_set_page_with_attrs. We cannot
inline the entire function because the AddressSpaceDispatch
structure is private to exec.c, and cannot easily be moved to
include/exec/memory-internal.h.
Compute is_ram and is_romd once within tlb_set_page_with_attrs.
Fold the number of tests against these predicates. Compute
cpu_physical_memory_is_clean outside of the tlb lock region.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pages that we want to track for NOTDIRTY are RAM. We do not
really need to go through the I/O path to handle them.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It does not require going through the whole I/O path
in order to discard a write.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Handle bswap on ram directly in load/store_helper. This fixes a
bug with the previous implementation in that one cannot use the
I/O path for RAM.
Fixes: a26fc6f515
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will shortly be using these more than once.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Increase the current runtime assert to a compile-time assert.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This forced inlining can result in missing symbols,
which makes a debugging build harder to follow.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl1uiyYdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8AuwgAnYLQQbL8kjSqzp7q
gRlj0M2SX41ZW3fMkI794RwsljD9Z0QS7YGnpzHolig9XUYrGnip7STrMvlCr/1L
CIMWNHlgitgBMszLqg42/TB+6RxXn+DMX/ShUzTagC6xQhinCIpdEjoLaTKSgeP+
foIyJ2uoJLKOBP8cPTQp8evongtoQIljpsZZ0K8a4sreO1d6ytH+olkuoGiROft+
VoJkA+kNHd9cE+LPCva8UFGu1QE6uCySvhepzOpnvOtK+SXKUm2yLOFGu7RWP1pT
RkE0oRyRnImtg+cViHfUUFogIffFROdL5tuYMQVuqbINeROPUgJPav+R1Nz1P60a
xM2HEw==
=bLLU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190903' into staging
Allow page table bit to swap endianness.
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
# gpg: Signature made Tue 03 Sep 2019 16:47:50 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20190903: (36 commits)
tcg: Factor out probe_write() logic into probe_access()
tcg: Make probe_write() return a pointer to the host page
s390x/tcg: Pass a size to probe_write() in do_csst()
hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY
mips/tcg: Call probe_write() for CONFIG_USER_ONLY as well
tcg: Enforce single page access in probe_write()
tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x code
s390x/tcg: Fix length calculation in probe_write_access()
s390x/tcg: Use guest_addr_valid() instead of h2g_valid() in probe_write_access()
tcg: Check for watchpoints in probe_write()
cputlb: Handle watchpoints via TLB_WATCHPOINT
cputlb: Remove double-alignment in store_helper
cputlb: Fix size operand for tlb_fill on unaligned store
exec: Factor out cpu_watchpoint_address_matches
cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK
exec: Factor out core logic of check_watchpoint()
exec: Move user-only watchpoint stubs inline
target/sparc: sun4u Invert Endian TTE bit
target/sparc: Add TLB entry with attributes
cputlb: Byte swap memory transaction attribute
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's also allow to probe other access types.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190830100959.26615-3-david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
... similar to tlb_vaddr_to_host(); however, allow access to the host
page except when TLB_NOTDIRTY or TLB_MMIO is set.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190830100959.26615-2-david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let's enforce the interface restriction.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190826075112.25637-5-david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Factor it out into common code. Similar to the !CONFIG_USER_ONLY variant,
let's not allow to cross page boundaries.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190826075112.25637-4-david@redhat.com>
[rth: Move cpu & cc variables inside if block.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let size > 0 indicate a promise to write to those bytes.
Check for write watchpoints in the probed range.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190823100741.9621-10-david@redhat.com>
[rth: Recompute index after tlb_fill; check TLB_WATCHPOINT.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The raising of exceptions from check_watchpoint, buried inside
of the I/O subsystem, is fundamentally broken. We do not have
the helper return address with which we can unwind guest state.
Replace PHYS_SECTION_WATCH and io_mem_watch with TLB_WATCHPOINT.
Move the call to cpu_check_watchpoint into the cputlb helpers
where we do have the helper return address.
This allows watchpoints on RAM to bypass the full i/o access path.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have already aligned page2 to the start of the next page.
There is no reason to do that a second time.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are currently passing the size of the full write to
the tlb_fill for the second page. Instead pass the real
size of the write to that page.
This argument is unused within all tlb_fill, except to be
logged via tracing, so in practice this makes no difference.
But in a moment we'll need the value of size2 for watchpoints,
and if we've computed the value we might as well use it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We had two different mechanisms to force a recheck of the tlb.
Before TLB_RECHECK was introduced, we had a PAGE_WRITE_INV bit
that would immediate set TLB_INVALID_MASK, which automatically
means that a second check of the tlb entry fails.
We can use the same mechanism to handle small pages.
Conserve TLB_* bits by removing TLB_RECHECK.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Notice new attribute, byte swap, and force the transaction through the
memory slow path.
Required by architectures that can invert endianness of memory
transaction, e.g. SPARC64 has the Invert Endian TTE bit.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <2a10a1f1c00a894af1212c8f68ef09c2966023c1.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that MemOp has been pushed down into the memory API, and
callers are encoding endianness, we can collapse byte swaps
along the I/O path into the accelerator and target independent
adjust_endianness.
Collapsing byte swaps along the I/O path enables additional endian
inversion logic, e.g. SPARC64 Invert Endian TTE bit, with redundant
byte swaps cancelling out.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <911ff31af11922a9afba9b7ce128af8b8b80f316.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Preparation for collapsing the two byte swaps adjust_endianness and
handle_bswap into the former.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <755b7104410956b743e1f1e9c34ab87db113360f.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Preparation for collapsing the two byte swaps adjust_endianness and
handle_bswap into the former.
Call memory_region_dispatch_{read|write} with endianness encoded into
the "MemOp op" operand.
This patch does not change any behaviour as
memory_region_dispatch_{read|write} is yet to handle the endianness.
Once it does handle endianness, callers with byte swaps can collapse
them into adjust_endianness.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <8066ab3eb037c0388dfadfe53c5118429dd1de3a.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".
Convert interfaces by using no-op size_memop.
After all interfaces are converted, size_memop will be implemented
and the memory_region_dispatch_{read|write} operand "unsigned size"
will be converted into a "MemOp op".
As size_memop is a no-op, this patch does not change any behaviour.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c4571c76467ade83660970f7ef9d7292297f1908.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Preparation for collapsing the two byte swaps, adjust_endianness and
handle_bswap, along the I/O path.
Target dependant attributes are conditionalized upon NEED_CPU_H.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190828165307.18321-8-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
Prior patch resets can_do_io flag at the TB entry. Therefore there is no
need in resetting this flag at the end of the block.
This patch removes redundant gen_io_end calls.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <156404429499.18669.13404064982854123855.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
Most of IO instructions can be executed only at the end of the block in
icount mode. Therefore translator can set cpu_can_io flag when translating
the last instruction.
But when the blocks are chained, then this flag is not reset and may
remain set at the beginning of the next block.
This patch resets the flag at the entry of any translation block,
making I/O operations impossible by default.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
--
v2 changes:
- reset can_do_io at the start of every TB (suggested by Paolo Bonzini)
Message-Id: <156404428943.18669.15747009371169578935.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Turn helper_retaddr into a multi-state flag that may now also
indicate when we're performing a read on behalf of the translator.
In this case, release the mmap_lock before the longjmp back to
the main cpu loop, and thereby avoid a failing assert therein.
Fixes: https://bugs.launchpad.net/qemu/+bug/1832353
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
At present we have a potential error in that helper_retaddr contains
data for handle_cpu_signal, but we have not ensured that those stores
will be scheduled properly before the operation that may fault.
It might be that these races are not in practice observable, due to
our use of -fno-strict-aliasing, but better safe than sorry.
Adjust all of the setters of helper_retaddr.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The loop is written with scalars, not vectors.
Use the correct type when incrementing.
Fixes: 5ee5c14cac
Reported-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While size_t is defined to happily access the biggest host object this
isn't the case when generating masks for 64 bit guests on 32 bit
hosts. Otherwise we end up truncating the address when we fall back to
our unaligned helper.
Fixes: https://bugs.launchpad.net/qemu/+bug/1831545
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When running on 32 bit TCG backends a wide unaligned load ends up
truncating data before returning to the guest. We specifically have
the return type as uint64_t to avoid any premature truncation so we
should use the same for the interim types.
Fixes: https://bugs.launchpad.net/qemu/+bug/1830872
Fixes: eed5664238
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in
qemu-common.h. This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.
Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]
Amusingly, we had already ignored the comment to keep this value
at the end of CPUState. This restores the minimum negative offset
from TCG_AREG0 for code generation.
For the couple of uses within qom/cpu.c, without NEED_CPU_H, add
a pointer from the CPUState object to the IcountDecr object within
CPUNegativeOffsetState.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move all softmmu tlb data into this structure. Arrange the
members so that we are able to place mask+table together and
at a smaller absolute offset from ENV.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Both structures are allocated once per mmu_idx.
There is no reason for them to be separate.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This operation performs d = (b & a) | (c & ~a), and is present
on a majority of host vector units. Include gvec expanders.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Improve tlb_vaddr_to_host for use by ARM SVE no-fault loads.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAlzVx4UdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+U1Af/b3cV5d5a1LWRdLgR
71JCPK/M3o43r2U9wCSikteXkmNBEdEoc5+WRk2SuZFLW/JB1DHDY7/gISPIhfoB
ZIza2TxD/QK1CQ5/mMWruKBlyygbYYZgsYaaNsMJRJgicgOSjTN0nuHMbIfv3tAN
mu+IlkD0LdhVjP0fz30Jpew3b3575RCjYxEPM6KQI3RxtQFjZ3FhqV5hKR4vtdP5
yLWJQzwAbaCB3SZUvvp7TN1ZsmeyLpc+Yz/YtRTqQedo7SNWWBKldLhqq4bZnH1I
AkzHbtWIOBrjWJ34ZMAgI5Q56Du9TBbBvCdM9azmrQjSu/2kdsPBPcUyOpnUCsCx
NyXo9g==
=x71l
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190510' into staging
Add CPUClass::tlb_fill.
Improve tlb_vaddr_to_host for use by ARM SVE no-fault loads.
# gpg: Signature made Fri 10 May 2019 19:48:37 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20190510: (27 commits)
tcg: Use tlb_fill probe from tlb_vaddr_to_host
tcg: Remove CPUClass::handle_mmu_fault
tcg: Use CPUClass::tlb_fill in cputlb.c
target/xtensa: Convert to CPUClass::tlb_fill
target/unicore32: Convert to CPUClass::tlb_fill
target/tricore: Convert to CPUClass::tlb_fill
target/tilegx: Convert to CPUClass::tlb_fill
target/sparc: Convert to CPUClass::tlb_fill
target/sh4: Convert to CPUClass::tlb_fill
target/s390x: Convert to CPUClass::tlb_fill
target/riscv: Convert to CPUClass::tlb_fill
target/ppc: Convert to CPUClass::tlb_fill
target/openrisc: Convert to CPUClass::tlb_fill
target/nios2: Convert to CPUClass::tlb_fill
target/moxie: Convert to CPUClass::tlb_fill
target/mips: Convert to CPUClass::tlb_fill
target/mips: Tidy control flow in mips_cpu_handle_mmu_fault
target/mips: Pass a valid error to raise_mmu_exception for user-only
target/microblaze: Convert to CPUClass::tlb_fill
target/m68k: Convert to CPUClass::tlb_fill
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The gvec expanders perform a modulo on the shift count. If the target
requires alternate behaviour, then it cannot use the generic gvec
expanders anyway, and will have to have its own custom code.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is less tricky than for loads, because we always fall
back to single byte stores to implement unaligned stores.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
If we attempt to recurse from load_helper back to load_helper,
even via intermediary, we do not get all of the constants
expanded away as desired.
But if we recurse back to the original helper (or a shim that
has a consistent function signature), the operands are folded
away as desired.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Going to approach this problem via __attribute__((always_inline))
instead, but full conversion will take several steps.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Having this in io_readx/io_writex meant that we forgot to
re-compute index after tlb_fill. It also means we can use
the normal aligned memory load path. It also fixes a bug
in that we had cached a use of index across a tlb_fill.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Instead of expanding a series of macros to generate the load/store
helpers we move stuff into common functions and rely on the compiler
to eliminate the dead code for each variant.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Most of the existing users would continue around a loop which
would fault the tlb entry in via a normal load/store.
But for AArch64 SVE we have an existing emulation bug wherein we
would mark the first element of a no-fault vector load as faulted
(within the FFR, not via exception) just because we did not have
its address in the TLB. Now we can properly only mark it as faulted
if there really is no valid, readable translation, while still not
raising an exception. (Note that beyond the first element of the
vector, the hardware may report a fault for any reason whatsoever;
with at least one element loaded, forward progress is guaranteed.)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This hook is now completely replaced by tlb_fill.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can now use the CPUClass hook instead of a named function.
Create a static tlb_fill function to avoid other changes within
cputlb.c. This also isolates the asserts within. Remove the
named tlb_fill function from all of the targets.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This hook will replace the (user-only mode specific) handle_mmu_fault
hook, and the (system mode specific) tlb_fill function.
The handle_mmu_fault hook was written as if there was a valid
way to recover from an mmu fault, and had 3 possible return states.
In reality, the only valid action is to raise an exception,
return to the main loop, and deliver the SIGSEGV to the guest.
Note that all of the current implementations of handle_mmu_fault
for guests which support linux-user do in fact only ever return 1,
which is the signal to return to the main loop.
Using the hook for system mode requires that all targets be converted,
so for now the hook is (optionally) used only from user-only mode.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This change adapts io_readx() to its input access_type. Currently
io_readx() treats any memory access as a read, although it has an
input argument "MMUAccessType access_type". This results in:
1) Calling the tlb_fill() only with MMU_DATA_LOAD
2) Considering only entry->addr_read as the tlb_addr
Buglink: https://bugs.launchpad.net/qemu/+bug/1825359
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Shahab Vahedi <shahab.vahedi@gmail.com>
Message-Id: <20190420072236.12347-1-shahab.vahedi@gmail.com>
[rth: Remove assert; fix expression formatting.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If a TB generates too much code, try again with fewer insns.
Fixes: https://bugs.launchpad.net/bugs/1824853
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In order to handle TB's that translate to too much code, we
need to place the control of the length of the translation
in the hands of the code gen master loop.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
dump_exec_info() takes an fprintf()-like callback and a FILE * to pass
to it.
Its only caller hmp_info_jit() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-5-armbru@redhat.com>
dump_opcount_info() takes an fprintf()-like callback and a FILE * to
pass to it.
Its only caller hmp_info_opcount() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-4-armbru@redhat.com>
Almost all trace-events point to docs/devel/tracing.txt in a comment
right at the beginning. Touch up the ones that don't.
[Updated with Markus' new commit description wording.
--Stefan]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-2-armbru@redhat.com
Message-Id: <20190314180929.27722-2-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We are failing to take into account that tlb_fill() can cause a
TLB resize, which renders prior TLB entry pointers/indices stale.
Fix it by re-doing the TLB entry lookups immediately after tlb_fill.
Fixes: 86e1eff8bc ("tcg: introduce dynamic TLB sizing", 2019-01-28)
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190209162745.12668-3-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit f7b78602fd we added the CPU cluster number to the
cflags field of the TB hash; this included adding it to the value
kept in tb->cflags, since we pass that field directly into the hash
calculation in some places. Unfortunately we forgot to check whether
other parts of the code were doing comparisons against tb->cflags
that would need to be updated.
It turns out that there is exactly one such place: the
tb_lookup__cpu_state() function checks whether the TB it has
found in the tb_jmp_cache has a tb->cflags matching the cf_mask
that is passed in. The tb->cflags has the cluster_index in it
but the cf_mask does not.
Hoist the "add cluster index to the cf_mask" code up from
tb_htable_lookup() to tb_lookup__cpu_state() so it can be considered
in the "did this TB match in the jmp cache" condition, as well as
when we do the full hash lookup by physical PC, flags, etc.
(tb_htable_lookup() is only called from tb_lookup__cpu_state(),
so this change doesn't require any further knock-on changes.)
Fixes: f7b78602fd ("accel/tcg: Add cluster number to TCG TB hash")
Tested-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Reported-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190205151810.571-1-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just like we do in cpu_exec().
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We forgot to add this check in faa9372c07 ("translate-all:
introduce assert_no_pages_locked", 2018-06-15); we only added
it after returning from a longjmp in cpu_exec_step_atomic. Fix it.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's either "GNU *Library* General Public version 2" or "GNU Lesser
General Public version *2.1*", but there was no "version 2.0" of the
"Lesser" library. So assume that version 2.1 is meant here.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1548252536-6242-5-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Include the cluster number in the hash we use to look
up TBs. This is important because a TB that is valid
for one cluster at a given physical address and set
of CPU flags is not necessarily valid for another:
the two clusters may have different views of physical
memory, or may have different CPU features (eg FPU
present or absent).
We put the cluster number in the high 8 bits of the
TB cflags. This gives us up to 256 clusters, which should
be enough for anybody. If we ever need more, or need
more bits in cflags for other purposes, we could make
tb_hash_func() take more data (and expand qemu_xxhash7()
to qemu_xxhash8()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20190121152218.9592-4-peter.maydell@linaro.org
In cpu_signal_handler() for aarch64 hosts, currently we parse
the faulting instruction to see if it is a load or a store.
Since the 3.16 kernel (~2014), the kernel has provided us with
the syndrome register for a fault, which includes the WnR bit.
Use this instead if it is present, only falling back to
instruction parsing if not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108180014.32386-1-peter.maydell@linaro.org
Now that all tcg backends support TCG_TARGET_IMPLEMENTS_DYN_TLB,
remove the define and the old code.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disabled in all TCG backends for now.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190116170114.26802-3-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently we evict an entry to the victim TLB when it doesn't match
the current address. But it could be that there's no match because
the current entry is empty (i.e. all -1's, for instance via tlb_flush).
Do not evict the entry to the vtlb in that case.
This change will help us keep track of the TLB's use rate, which
we'll use to implement a policy for dynamic TLB sizing.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190116170114.26802-2-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
osdep.h will also define the available Windows API version for QEMU.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181122110039.15972-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c445175310fa836b61fd862a55628907f0093194.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is essentially redundant with tlb_c.dirty.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Especially for guests with large numbers of tlbs, like ARM or PPC,
we may well not use all of them in between flush operations.
Remember which tlbs have been used since the last flush, and
avoid any useless flushing.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Our only statistic so far was "full" tlb flushes, where all mmu_idx
are flushed at the same time.
Now count "partial" tlb flushes where sets of mmu_idx are flushed,
but the set is not maximal. Account one per mmu_idx flushed, as
that is the unit of work performed.
We don't actually count elided flushes yet, but go ahead and change
the interface presented to the monitor all at once.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The difference between the two sets of APIs is now miniscule.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The difference between the two sets of APIs is now miniscule.
This allows tlb_flush, tlb_flush_all_cpus, and tlb_flush_all_cpus_synced
to be merged with their corresponding by_mmuidx functions as well. For
accounting, consider mmu_idx_bitmask = ALL_MMUIDX_BITS to be a full flush.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The rest of the tlb victim cache is per-tlb,
the next use index should be as well.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The set of large pages in the kernel is probably not the same
as the set of large pages in the application. Forcing one
range to cover both will flush more often than necessary.
This allows tlb_flush_page_async_work to flush just the one
mmu_idx implicated, which in turn allows us to remove
tlb_check_page_and_flush_by_mmuidx_async_work.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Protect it with the tlb_lock instead of using atomics.
The move puts it in or near the same cacheline as the lock;
using the lock means we don't need a second atomic operation
in order to perform the update. Which makes it cheap to also
update pending_flush in tlb_flush_by_mmuidx_async_work.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The bugs this was working around were fixed with commits
022d6378c7 target/unicore32: remove tlb_flush from uc32_init_fn
6e11beecfd target/alpha: remove tlb_flush from alpha_cpu_initfn
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is the first of several moves to reduce the size of the
CPU_COMMON_TLB macro and improve some locality of refernce.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GCC7+ will no longer advertise support for 16-byte __atomic operations
if only cmpxchg is supported, as for x86_64. Fortunately, x86_64 still
has support for __sync_compare_and_swap_16 and we can make use of that.
AArch64 does not have, nor ever has had such support, so open-code it.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Isolate the computation of an index from an address into a
helper before we change that function.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[ cota: convert tlb_vaddr_to_host; use atomic_read on addr_write ]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181009175129.17888-2-cota@braap.org>
Currently we rely on atomic operations for cross-CPU invalidations.
There are two cases that these atomics miss: cross-CPU invalidations
can race with either (1) vCPU threads flushing their TLB, which
happens via memset, or (2) vCPUs calling tlb_reset_dirty on their TLB,
which updates .addr_write with a regular store. This results in
undefined behaviour, since we're mixing regular and atomic ops
on concurrent accesses.
Fix it by using tlb_lock, a per-vCPU lock. All updaters of tlb_table
and the corresponding victim cache now hold the lock.
The readers that do not hold tlb_lock must use atomic reads when
reading .addr_write, since this field can be updated by other threads;
the conversion to atomic reads is done in the next patch.
Note that an alternative fix would be to expand the use of atomic ops.
However, in the case of TLB flushes this would have a huge performance
impact, since (1) TLB flushes can happen very frequently and (2) we
currently use a full memory barrier to flush each TLB entry, and a TLB
has many entries. Instead, acquiring the lock is barely slower than a
full memory barrier since it is uncontended, and with a single lock
acquisition we can flush the entire TLB.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181009174557.16125-6-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181009174557.16125-5-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Paves the way for the addition of a per-TLB lock.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181009174557.16125-4-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Consistently access u16.high with atomics to avoid
undefined behaviour in MTTCG.
Note that icount_decr.u16.low is only used in icount mode,
so regular accesses to it are OK.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181010144853.13005-2-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than test NOCHAIN before linking, do not emit the
goto_tb opcode at all. We already do this for goto_ptr.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The global cpu_single_env variable has been removed more than 5 years
ago, so apparently nobody used this dead debug code in that timeframe
anymore. Thus let's remove it completely now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1537204134-15905-1-git-send-email-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU cannot pass through the breakpoints when 'si' command is used
in remote gdb. This patch disables inserting the breakpoints
when we are already single stepping though the gdb remote protocol.
This patch also fixes icount calculation for the blocks that include
breakpoints - instruction with breakpoint is not executed and shouldn't
be used in icount calculation.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180912081910.3228.8523.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Accessing the HT from an iterator results almost always
in a deadlock. Given that only one qht-internal function
uses this argument, drop it from the interface.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We set up TLB entries in tlb_set_page_with_attrs(), where we have
some logic for determining whether the TLB entry is considered
to be RAM-backed, and thus has a valid addend field. When we
look at the TLB entry in get_page_addr_code(), we use different
logic for determining whether to treat the page as RAM-backed
and use the addend field. This is confusing, and in fact buggy,
because the code in tlb_set_page_with_attrs() correctly decides
that rom_device memory regions not in romd mode are not RAM-backed,
but the code in get_page_addr_code() thinks they are RAM-backed.
This typically results in "Bad ram pointer" assertion if the
guest tries to execute from such a memory region.
Fix this by making get_page_addr_code() just look at the
TLB_MMIO bit in the code_address field of the TLB, which
tlb_set_page_with_attrs() sets if and only if the addend
field is not valid for code execution.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180713150945.12348-1-peter.maydell@linaro.org
Now that all the callers can handle get_page_addr_code() returning -1,
remove all the code which tries to handle execution from MMIO regions
or small-MMU-region RAM areas. This will mean that we can correctly
execute from these areas, rather than ending up either aborting QEMU
or delivering an incorrect guest exception.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180710160013.26559-6-peter.maydell@linaro.org
If get_page_addr_code() returns -1, this indicates that there is no RAM
page we can read a full TB from. Instead we must create a TB which
contains a single instruction and which we do not cache, so it is
executed only once.
Since this means we can now have TBs which are not in any page list,
we also need to make tb_phys_invalidate() handle them (by not trying
to remove them from a nonexistent page list).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180710160013.26559-5-peter.maydell@linaro.org
When we support execution from non-RAM MMIO regions, get_page_addr_code()
will return -1 to indicate that there is no RAM at the requested address.
Handle this in tb_check_watchpoint() -- if the exception happened for a
PC which doesn't correspond to RAM then there is no need to invalidate
any TBs, because the one-instruction TB will not have been cached.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180710160013.26559-4-peter.maydell@linaro.org
When we support execution from non-RAM MMIO regions, get_page_addr_code()
will return -1 to indicate that there is no RAM at the requested address.
Handle this in the cpu-exec TB hashtable lookup code, treating it as
"no match found".
Note that the call to get_page_addr_code() in tb_lookup_cmp() needs
no changes -- a return of -1 will already correctly result in the
function returning false.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180710160013.26559-3-peter.maydell@linaro.org
The io_readx() function needs to know whether the load it is
doing is an MMU_DATA_LOAD or an MMU_INST_FETCH, so that it
can pass the right value to the cpu_transaction_failed()
function. Plumb this information through from the softmmu
code.
This is currently not often going to give the wrong answer,
because usually instruction fetches go via get_page_addr_code().
However once we switch over to handling execution from non-RAM by
creating single-insn TBs, the path for an insn fetch to generate
a bus error will be through cpu_ld*_code() and io_readx(),
so without this change we will generate a d-side fault when we
should generate an i-side fault.
We also have to pass the access type via a CPU struct global
down to unassigned_mem_read(), for the benefit of the targets
which still use the cpu_unassigned_access() hook (m68k, mips,
sparc, xtensa).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180710160013.26559-2-peter.maydell@linaro.org
In commit 4b1a3e1e34 we added a check for whether the TLB entry
we had following a tlb_fill had the INVALID bit set. This could
happen in some circumstances because a stale or wrong TLB entry was
pulled out of the victim cache. However, after commit
68fea03855 (which prevents stale entries being in the victim
cache) and the previous commit (which ensures we don't incorrectly
hit in the victim cache)) this should never be possible.
Drop the check on TLB_INVALID_MASK from the "is this a TLB_RECHECK?"
condition, and instead assert that the tlb fill procedure has given
us a valid TLB entry (or longjumped out with a guest exception).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180713141636.18665-3-peter.maydell@linaro.org
In get_page_addr_code(), we were incorrectly looking in the victim
TLB for an entry which matched the target address for reads, not
for code accesses. This meant that we could hit on a victim TLB
entry that indicated that the address was readable but not
executable, and incorrectly bypass the call to tlb_fill() which
should generate the guest MMU exception. Fix this bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180713141636.18665-2-peter.maydell@linaro.org
The typo was found by codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20180712194454.26765-1-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a record-replay regression introduced by 95590e2
("translate-all: discard TB when tb_link_page returns an existing
matching TB", 2018-06-15). The problem is that code using CF_NOCACHE
assumes that the TB returned from tb_gen_code is always a
newly-generated one. This assumption, however, was broken in
the aforementioned commit.
Fix it by honouring CF_NOCACHE, so that tb_gen_code always
returns a newly-generated TB when CF_NOCACHE is passed to it.
Do this by avoiding the TB hash table if CF_NOCACHE is set.
Reported-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1530806837-5416-1-git-send-email-cota@braap.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When installing a TLB entry, remove any cached version of the
same page in the VTLB. If the existing TLB entry matches, do
not copy into the VTLB, but overwrite it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In get_page_addr_code() when we check whether the TLB entry
is marked as TLB_RECHECK, we should not go down that code
path if the TLB entry is not valid at all (ie the TLB_INVALID
bit is set).
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reported-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180629161731.16239-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit 71b9a45330 we changed the condition we use
to determine whether we need to refill the TLB in
get_page_addr_code() to
if (unlikely(env->tlb_table[mmu_idx][index].addr_code !=
(addr & (TARGET_PAGE_MASK | TLB_INVALID_MASK)))) {
This isn't the right check (it will falsely fail if the
input addr happens to have the low bit corresponding to
TLB_INVALID_MASK set, for instance). Replace it with a
use of the new tlb_hit() function, which is the correct test.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180629162122.19376-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The condition to check whether an address has hit against a particular
TLB entry is not completely trivial. We do this in various places, and
in fact in one place (get_page_addr_code()) we have got the condition
wrong. Abstract it out into new tlb_hit() and tlb_hit_page() inline
functions (one for a known-page-aligned address and one for an
arbitrary address), and use them in all the places where we had the
condition correct.
This is a no-behaviour-change patch; we leave fixing the buggy
code in get_page_addr_code() to a subsequent patch.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180629162122.19376-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 0b5c91f ("translate-all: use per-page locking in !user-mode",
2018-06-15) introduced per-page locking. It assumed that the physical
pages corresponding to a TB (at most two pages) are always distinct,
which is wrong. For instance, an xtensa test provided by Max Filippov
is broken by the commit, since the test maps two virtual pages
to the same physical page:
virt1: 7fff, virt2: 8000
phys1 6000fff, phys2 6000000
Fix it by removing the assumption from page_lock_pair.
If the two physical page addresses are equal, we only lock
the PageDesc once. Note that the two callers of page_lock_pair,
namely page_unlock_tb and tb_link_page, are also updated so that
we do not try to unlock the same PageDesc twice.
Fixes: 0b5c91f74f
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1529944302-14186-1-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When guest CPU PM is enabled, and with -cpu host, expose the host CPU
MWAIT leaf in the CPUID so guest can make good PM decisions.
Note: the result is 100% CPU utilization reported by host as host
no longer knows that the CPU is halted.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180622192148.178309-3-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Place them in exec.c, exec-all.h and ram_addr.h. This removes
knowledge of translate-all.h (which is an internal header) from
several files outside accel/tcg and removes knowledge of
AddressSpace from translate-all.c (as it only operates on ram_addr_t).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Determining the size of a field is useful when you don't have a struct
variable handy. Open-coding this is ugly.
This patch adds the sizeof_field() macro, which is similar to
typeof_field(). Existing instances are updated to use the macro.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180614164431.29305-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We do not trace guest atomic accesses. Fix it.
Tested with a modified atomic_add-bench so that it executes
a deterministic number of instructions, i.e. fixed seeding,
no threading and fixed number of loop iterations instead
of running for a certain time.
Before:
- With parallel_cpus = false (no clone syscall so it is never set to true):
220070 memory accesses
- With parallel_cpus = true (hard-coded):
212105 memory accesses <-- we're not tracing the atomics!
After:
220070 memory accesses regardless of parallel_cpus.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 1527028012-21888-6-git-send-email-cota@braap.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add support for MMU protection regions that are smaller than
TARGET_PAGE_SIZE. We do this by marking the TLB entry for those
pages with a flag TLB_RECHECK. This flag causes us to always
take the slow-path for accesses. In the slow path we can then
special case them to always call tlb_fill() again, so we have
the correct information for the exact address being accessed.
This change allows us to handle reading and writing from small
regions; we cannot deal with execution from the small region.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180620130619.11362-2-peter.maydell@linaro.org
Use mmap_lock in user-mode to protect TCG state and the page descriptors.
In !user-mode, each vCPU has its own TCG state, so no locks needed.
Per-page locks are used to protect the page descriptors.
Per-TB locks are used in both modes to protect TB jumps.
Some notes:
- tb_lock is removed from notdirty_mem_write by passing a
locked page_collection to tb_invalidate_phys_page_fast.
- tcg_tb_lookup/remove/insert/etc have their own internal lock(s),
so there is no need to further serialize access to them.
- do_tb_flush is run in a safe async context, meaning no other
vCPU threads are running. Therefore acquiring mmap_lock there
is just to please tools such as thread sanitizer.
- Not visible in the diff, but tb_invalidate_phys_page already
has an assert_memory_lock.
- cpu_io_recompile is !user-only, so no mmap_lock there.
- Added mmap_unlock()'s before all siglongjmp's that could
be called in user-mode while mmap_lock is held.
+ Added an assert for !have_mmap_lock() after returning from
the longjmp in cpu_exec, just like we do in cpu_exec_step_atomic.
Performance numbers before/after:
Host: AMD Opteron(tm) Processor 6376
ubuntu 17.04 ppc64 bootup+shutdown time
700 +-+--+----+------+------------+-----------+------------*--+-+
| + + + + + *B |
| before ***B*** ** * |
|tb lock removal ###D### *** |
600 +-+ *** +-+
| ** # |
| *B* #D |
| *** * ## |
500 +-+ *** ### +-+
| * *** ### |
| *B* # ## |
| ** * #D# |
400 +-+ ** ## +-+
| ** ### |
| ** ## |
| ** # ## |
300 +-+ * B* #D# +-+
| B *** ### |
| * ** #### |
| * *** ### |
200 +-+ B *B #D# +-+
| #B* * ## # |
| #* ## |
| + D##D# + + + + |
100 +-+--+----+------+------------+-----------+------------+--+-+
1 8 16 Guest CPUs 48 64
png: https://imgur.com/HwmBHXe
debian jessie aarch64 bootup+shutdown time
90 +-+--+-----+-----+------------+------------+------------+--+-+
| + + + + + + |
| before ***B*** B |
80 +tb lock removal ###D### **D +-+
| **### |
| **## |
70 +-+ ** # +-+
| ** ## |
| ** # |
60 +-+ *B ## +-+
| ** ## |
| *** #D |
50 +-+ *** ## +-+
| * ** ### |
| **B* ### |
40 +-+ **** # ## +-+
| **** #D# |
| ***B** ### |
30 +-+ B***B** #### +-+
| B * * # ### |
| B ###D# |
20 +-+ D ##D## +-+
| D# |
| + + + + + + |
10 +-+--+-----+-----+------------+------------+------------+--+-+
1 8 16 Guest CPUs 48 64
png: https://imgur.com/iGpGFtv
The gains are high for 4-8 CPUs. Beyond that point, however, unrelated
lock contention significantly hurts scalability.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tb_lock was needed when the function did retranslation. However,
since fca8a500d5 ("tcg: Save insn data and use it in
cpu_restore_state_from_tb") we don't do retranslation.
Get rid of the comment.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The acquisition of tb_lock was added when the async tlb_flush
was introduced in e3b9ca810 ("cputlb: introduce tlb_flush_* async work.")
tb_lock was there to allow us to do memset() on the tb_jmp_cache's.
However, since f3ced3c592 ("tcg: consistently access cpu->tb_jmp_cache
atomically") all accesses to tb_jmp_cache are atomic, so tb_lock
is not needed here. Get rid of it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This applies to both user-mode and !user-mode emulation.
Instead of relying on a global lock, protect the list of incoming
jumps with tb->jmp_lock. This lock also protects tb->cflags,
so update all tb->cflags readers outside tb->jmp_lock to use
atomic reads via tb_cflags().
In order to find the destination TB (and therefore its jmp_lock)
from the origin TB, we introduce tb->jmp_dest[].
I considered not using a linked list of jumps, which simplifies
code and makes the struct smaller. However, it unnecessarily increases
memory usage, which results in a performance decrease. See for
instance these numbers booting+shutting down debian-arm:
Time (s) Rel. err (%) Abs. err (s) Rel. slowdown (%)
------------------------------------------------------------------------------
before 20.88 0.74 0.154512 0.
after 20.81 0.38 0.079078 -0.33524904
GTree 21.02 0.28 0.058856 0.67049808
GHashTable + xxhash 21.63 1.08 0.233604 3.5919540
Using a hash table or a binary tree to keep track of the jumps
doesn't really pay off, not only due to the increased memory usage,
but also because most TBs have only 0 or 1 jumps to them. The maximum
number of jumps when booting debian-arm that I measured is 35, but
as we can see in the histogram below a TB with that many incoming jumps
is extremely rare; the average TB has 0.80 incoming jumps.
n_jumps: 379208; avg jumps/tb: 0.801099
dist: [0.0,1.0)|▄█▁▁▁▁▁▁▁▁▁▁▁ ▁▁▁▁▁▁ ▁▁▁ ▁▁▁ ▁|[34.0,35.0]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the recently-gained QHT feature of returning the matching TB if it
already exists. This allows us to get rid of the lookup we perform
right after acquiring tb_lock.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The appended adds assertions to make sure we do not longjmp with page
locks held. Note that user-mode has nothing to check, since page_locks
are !user-mode only.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is only compiled under CONFIG_DEBUG_TCG to avoid
bloating the binary.
In user-mode, assert_page_locked is equivalent to assert_mmap_lock.
Note: There are some tb_lock assertions left that will be
removed by later patches.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting parallel TCG generation.
Instead of using a global lock (tb_lock) to protect changes
to pages, use fine-grained, per-page locks in !user-mode.
User-mode stays with mmap_lock.
Sometimes changes need to happen atomically on more than one
page (e.g. when a TB that spans across two pages is
added/invalidated, or when a range of pages is invalidated).
We therefore introduce struct page_collection, which helps
us keep track of a set of pages that have been locked in
the appropriate locking order (i.e. by ascending page index).
This commit first introduces the structs and the function helpers,
to then convert the calling code to use per-page locking. Note
that tb_lock is not removed yet.
While at it, rename tb_alloc_page to tb_page_add, which pairs with
tb_page_remove.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This greatly simplifies next commit's diff.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
So that we pass a same-page range to tb_invalidate_phys_page_range,
instead of always passing an end address that could be on a different
page.
As discussed with Peter Maydell on the list [1], tb_invalidate_phys_page_range
doesn't actually do much with 'end', which explains why we have never
hit a bug despite going against what the comment on top of
tb_invalidate_phys_page_range requires:
> * Invalidate all TBs which intersect with the target physical address range
> * [start;end[. NOTE: start and end must refer to the *same* physical page.
The appended honours the comment, which avoids confusion.
While at it, rework the loop into a for loop, which is less error prone
(e.g. "continue" won't result in an infinite loop).
[1] https://lists.gnu.org/archive/html/qemu-devel/2017-07/msg09165.html
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting parallel TCG generation.
Move the hole to the end of the struct, so that a u32
field can be added there without bloating the struct.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting parallel TCG generation.
We never remove entries from the radix tree, so we can use cmpxchg
to implement lockless insertions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This commit does several things, but to avoid churn I merged them all
into the same commit. To wit:
- Use uintptr_t instead of TranslationBlock * for the list of TBs in a page.
Just like we did in (c37e6d7e "tcg: Use uintptr_t type for
jmp_list_{next|first} fields of TB"), the rationale is the same: these
are tagged pointers, not pointers. So use a more appropriate type.
- Only check the least significant bit of the tagged pointers. Masking
with 3/~3 is unnecessary and confusing.
- Introduce the TB_FOR_EACH_TAGGED macro, and use it to define
PAGE_FOR_EACH_TB, which improves readability. Note that
TB_FOR_EACH_TAGGED will gain another user in a subsequent patch.
- Update tb_page_remove to use PAGE_FOR_EACH_TB. In case there
is a bug and we attempt to remove a TB that is not in the list, instead
of segfaulting (since the list is NULL-terminated) we will reach
g_assert_not_reached().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Thereby making it per-TCGContext. Once we remove tb_lock, this will
avoid an atomic increment every time a TB is invalidated.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This paves the way for enabling scalable parallel generation of TCG code.
Instead of tracking TBs with a single binary search tree (BST), use a
BST for each TCG region, protecting it with a lock. This is as scalable
as it gets, since each TCG thread operates on a separate region.
The core of this change is the introduction of struct tcg_region_tree,
which contains a pointer to a GTree and an associated lock to serialize
accesses to it. We then allocate an array of tcg_region_tree's, adding
the appropriate padding to avoid false sharing based on
qemu_dcache_linesize.
Given a tc_ptr, we first find the corresponding region_tree. This
is done by special-casing the first and last regions first, since they
might be of size != region.size; otherwise we just divide the offset
by region.stride. I was worried about this division (several dozen
cycles of latency), but profiling shows that this is not a fast path.
Note that region.stride is not required to be a power of two; it
is only required to be a multiple of the host's page size.
Note that with this design we can also provide consistent snapshots
about all region trees at once; for instance, tcg_tb_foreach
acquires/releases all region_tree locks before/after iterating over them.
For this reason we now drop tb_lock in dump_exec_info().
As an alternative I considered implementing a concurrent BST, but this
can be tricky to get right, offers no consistent snapshots of the BST,
and performance and scalability-wise I don't think it could ever beat
having separate GTrees, given that our workload is insert-mostly (all
concurrent BST designs I've seen focus, understandably, on making
lookups fast, which comes at the expense of convoluted, non-wait-free
insertions/removals).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The meaning of "existing" is now changed to "matches in hash and
ht->cmp result". This is saner than just checking the pointer value.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qht_lookup now uses the default cmp function. qht_lookup_custom is defined
to retain the old behaviour, that is a cmp function is explicitly provided.
qht_insert will gain use of the default cmp in the next patch.
Note that we move qht_lookup_custom's @func to be the last argument,
which makes the new qht_lookup as simple as possible.
Instead of this (i.e. keeping @func 2nd):
0000000000010750 <qht_lookup>:
10750: 89 d1 mov %edx,%ecx
10752: 48 89 f2 mov %rsi,%rdx
10755: 48 8b 77 08 mov 0x8(%rdi),%rsi
10759: e9 22 ff ff ff jmpq 10680 <qht_lookup_custom>
1075e: 66 90 xchg %ax,%ax
We get:
0000000000010740 <qht_lookup>:
10740: 48 8b 4f 08 mov 0x8(%rdi),%rcx
10744: e9 37 ff ff ff jmpq 10680 <qht_lookup_custom>
10749: 0f 1f 80 00 00 00 00 nopl 0x0(%rax)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently we don't support board configurations that put an IOMMU
in the path of the CPU's memory transactions, and instead just
assert() if the memory region fonud in address_space_translate_for_iotlb()
is an IOMMUMemoryRegion.
Remove this limitation by having the function handle IOMMUs.
This is mostly straightforward, but we must make sure we have
a notifier registered for every IOMMU that a transaction has
passed through, so that we can flush the TLB appropriately
when any of the IOMMUs change their mappings.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180604152941.20374-5-peter.maydell@linaro.org
The API for cpu_transaction_failed() says that it takes the physical
address for the failed transaction. However we were actually passing
it the offset within the target MemoryRegion. We don't currently
have any target CPU implementations of this hook that require the
physical address; fix this bug so we don't get confused if we ever
do add one.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180611125633.32755-3-peter.maydell@linaro.org
The 'addr' field in the CPUIOTLBEntry struct has a rather non-obvious
use; add a comment documenting it (reverse-engineered from what
the code that sets it is doing).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180611125633.32755-2-peter.maydell@linaro.org
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to address_space_translate()
and address_space_translate_cached(). Callers either have an
attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-4-peter.maydell@linaro.org
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to tb_invalidate_phys_addr().
Its callers either have an attrs value to hand, or don't care
and can use MEMTXATTRS_UNSPECIFIED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180521140402.23318-3-peter.maydell@linaro.org
Usually the logging of the CPU state produced by -d cpu is sufficient
to diagnose problems, but sometimes you want to see the state of
the floating point registers as well. We don't want to enable that
by default as it adds a lot of extra data to the log; instead,
allow it to be optionally enabled via -d fpu.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180510130024.31678-1-peter.maydell@linaro.org
* hw/arm/iotkit.c: fix minor memory leak
* softfloat: fix wrong-exception-flags bug for multiply-add corner case
* arm: isolate and clean up DTB generation
* implement Arm v8.1-Atomics extension
* Fix some bugs and missing instructions in the v8.2-FP16 extension
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uXY+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180510' into staging
target-arm queue:
* hw/arm/iotkit.c: fix minor memory leak
* softfloat: fix wrong-exception-flags bug for multiply-add corner case
* arm: isolate and clean up DTB generation
* implement Arm v8.1-Atomics extension
* Fix some bugs and missing instructions in the v8.2-FP16 extension
# gpg: Signature made Thu 10 May 2018 18:44:34 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180510: (21 commits)
target/arm: Clear SVE high bits for FMOV
target/arm: Fix float16 to/from int16
target/arm: Implement vector shifted FCVT for fp16
target/arm: Implement vector shifted SCVF/UCVF for fp16
target/arm: Enable ARM_FEATURE_V8_ATOMICS for user-only
target/arm: Implement CAS and CASP
target/arm: Fill in disas_ldst_atomic
target/arm: Introduce ARM_FEATURE_V8_ATOMICS and initial decode
target/riscv: Use new atomic min/max expanders
tcg: Use GEN_ATOMIC_HELPER_FN for opposite endian atomic add
tcg: Introduce atomic helpers for integer min/max
target/xtensa: Use new min/max expanders
target/arm: Use new min/max expanders
tcg: Introduce helpers for integer min/max
atomic.h: Work around gcc spurious "unused value" warning
make sure that we aren't overwriting mc->get_hotplug_handler by accident
arm/boot: split load_dtb() from arm_load_kernel()
platform-bus-device: use device plug callback instead of machine_done notifier
pc: simplify MachineClass::get_hotplug_handler handling
softfloat: Handle default NaN mode after pickNaNMulAdd, not before
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# target/riscv/translate.c
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Given that this atomic operation will be used by both risc-v
and aarch64, let's not duplicate code across the two targets.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While at it, use int for both num_insns and max_insns to make
sure we have same-type comparisons.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In icount mode, instructions that access io memory spaces in the middle
of the translation block invoke TB recompilation. After recompilation,
such instructions become last in the TB and are allowed to access io
memory spaces.
When the code includes instruction like i386 'xchg eax, 0xffffd080'
which accesses APIC, QEMU goes into an infinite loop of the recompilation.
This instruction includes two memory accesses - one read and one write.
After the first access, APIC calls cpu_report_tpr_access, which restores
the CPU state to get the current eip. But cpu_restore_state_from_tb
resets the cpu->can_do_io flag which makes the second memory access invalid.
Therefore the second memory access causes a recompilation of the block.
Then these operations repeat again and again.
This patch moves resetting cpu->can_do_io flag from
cpu_restore_state_from_tb to cpu_loop_exit* functions.
It also adds a parameter for cpu_restore_state which controls restoring
icount. There is no need to restore icount when we only query CPU state
without breaking the TB. Restoring it in such cases leads to the
incorrect flow of the virtual time.
In most cases new parameter is true (icount should be recalculated).
But there are two cases in i386 and openrisc when the CPU state is only
queried without the need to break the TB. This patch fixes both of
these cases.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180409091320.12504.35329.stgit@pasha-VirtualBox>
[rth: Make can_do_io setting unconditional; move from cpu_exec;
make cpu_loop_exit_{noexc,restore} call cpu_loop_exit.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A mistake in the type passed to sizeof, that happens to work
when the out-of-line fallback itself is using host vectors,
but fails when using only the base types.
Tested-by: Emilio G. Cota <cota@braap.org>
Reported-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have confused the number of instructions that have been
executed in the TB with the number of instructions needed
to repeat the I/O instruction.
We have used cpu_restore_state_from_tb, which means that
the guest pc is pointing to the I/O instruction. The only
time the answer to the later question is not 1 is when
MIPS or SH4 need to re-execute the branch for the delay
slot as well.
We must rely on cpu->cflags_next_tb to generate the next TB,
as otherwise we have a race condition with other guest cpus
within the TB cache.
Fixes: 0790f86861
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180319031545.29359-1-richard.henderson@linaro.org>
Tested-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cpu_io_recompile() function was broken by
the commit 9b990ee5a3. Instead of regenerating
the block starting from PC of the original block, it just set the instruction
counter for TCG. In most cases this was unnoticed, but in icount mode
there was an exception for incorrect usage of CF_LAST_IO flag.
This patch recovers recompilation of the original block and also
configures translation for executing single IO instruction which
caused a recompilation.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20180227095338.1060.27385.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Function cpu_handle_interrupt calls cc->cpu_exec_interrupt to process
pending hardware interrupts. Under the hood cpu_exec_interrupt uses
cpu->exception_index to pass information to the internal function which
is usually common for exception and interrupt processing.
But this value is not reset after return and may be processed again
by cpu_handle_exception. This does not happen due to overwriting
the exception_index at the end of cpu_handle_interrupt.
But this branch may also overwrite the valid exception_index in some cases.
Therefore this patch:
1. resets exception_index just after the call to cpu_exec_interrupt
2. prevents overwriting the meaningful value of exception_index
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180227095140.1060.61357.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Use dup to convert a non-constant scalar to a third vector.
Add addition, multiplication, and logical operations with an immediate.
Add addition, subtraction, multiplication, and logical operations with
a non-constant scalar. Allow for the front-end to build operations in
which the scalar operand comes first.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No vector ops as yet. SSE only has direct support for 8- and 16-bit
saturation; handling 32- and 64-bit saturation is much more expensive.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Opcodes are added for scalar and vector shifts, but considering the
varied semantics of these do not expose them to the front ends. Do
go ahead and provide them in case they are needed for backend expansion.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We dropped support for ia64 host CPUs in the 2.11 release (removing
the TCG backend for it, and advertising the support as being
completely removed in the changelog). However there are a few bits
and pieces of code still floating about. Remove those, too.
We can drop the check in configure for "ia64 or hppa host?"
entirely, because we don't support hppa hosts either any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1516897189-11035-1-git-send-email-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The MC68040 MMU provides the size of the access that
triggers the page fault.
This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.
So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().
To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.
This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
If multiple guest threads in user-mode emulation write to a
page which QEMU has marked read-only because of cached TCG
translations, the threads can race in page_unprotect:
* threads A & B both try to do a write to a page with code in it at
the same time (ie which we've made non-writeable, so SEGV)
* they race into the signal handler with this faulting address
* thread A happens to get to page_unprotect() first and takes the
mmap lock, so thread B sits waiting for it to be done
* A then finds the page, marks it PAGE_WRITE and mprotect()s it writable
* A can then continue OK (returns from signal handler to retry the
memory access)
* ...but when B gets the mmap lock it finds that the page is already
PAGE_WRITE, and so it exits page_unprotect() via the "not due to
protected translation" code path, and wrongly delivers the signal
to the guest rather than just retrying the access
In particular, this meant that trying to run 'javac' in user-mode
emulation would fail with a spurious guest SIGSEGV.
Handle this by making page_unprotect() assume that a call for a page
which is already PAGE_WRITE is due to a race of this sort and return
a "fault handled" indication.
Since this would cause an infinite loop if we ever called
page_unprotect() for some other kind of fault than "write failed due
to bad access permissions", tighten the condition in
handle_cpu_signal() to check the signal number and si_code, and add a
comment so that if somebody does ever find themselves debugging an
infinite loop of faults they have some clue about why.
(The trick for identifying the correct setting for
current_tb_invalidated for thread B (needed to handle the precise-SMC
case) is due to Richard Henderson. Paolo Bonzini suggested just
relying on si_code rather than trying anything more complicated.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1511879725-9576-3-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Currently all the architecture/OS specific cpu_signal_handler()
functions call handle_cpu_signal() without passing it the
siginfo_t. We're going to want that so we can look at the si_code
to determine whether this is a SEGV_ACCERR access violation or
some other kind of fault, so change the functions to pass through
the pointer to the siginfo_t rather than just the si_addr value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1511879725-9576-2-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20171217055023.29225-1-pbonzini@redhat.com>
[rth: Also change the Chain logging in helper_lookup_tb_ptr.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The conditional memory barrier not only looks strange but actually is
wrong.
On s390x, I can reproduce interrupts via cpu_interrupt() not leading to
a proper kick out of emulation every now and then. cpu_interrupt() is
especially used for inter CPU communication via SIGP (esp. external
calls and emergency interrupts).
With this patch, I was not able to reproduce. (esp. no stalls or hangs
in the guest).
My setup is s390x MTTCG with 16 VCPUs on 8 CPU host, running make -j16.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171129191319.11483-1-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
exec: housekeeping (funny since 02d0e09503)
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The cpu-exec-common.c file includes memory-internal.h, but it doesn't
actually use anything from that header. Remove the unnecessary include.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
To do a write to memory that is marked as notdirty, we need
to invalidate any TBs we have cached for that memory, and
update the cpu physical memory dirty flags for VGA and migration.
The slowpath code in notdirty_mem_write() does all this correctly,
but the new atomic handling code in atomic_mmu_lookup() doesn't
do anything at all, it just clears the dirty bit in the TLB.
The effect of this bug is that if the first write to a notdirty
page for which we have cached TBs is by a guest atomic access,
we fail to invalidate the TBs and subsequently will execute
incorrect code. This can be seen by trying to run 'javac' on AArch64.
Use the new notdirty_call_before() and notdirty_call_after()
functions to correctly handle the update to notdirty memory
in the atomic codepath.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1511201308-23580-3-git-send-email-peter.maydell@linaro.org
When we handle a signal from a fault within a user-only memory helper,
we cannot cpu_restore_state with the PC found within the signal frame.
Use a TLS variable, helper_retaddr, to record the unwind start point
to find the faulting guest insn.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch ensures that icount_decr.u32.high is clear before calling
cpu_exec_nocache when exception is pending. Because the exception is
caused by the first instruction in the block and it cannot be executed
without resetting the flag.
There are two parts in the fix. First, clear icount_decr.u32.high in
cpu_handle_interrupt (just before processing the "dependent" request,
stored in cpu->interrupt_request or cpu->exit_request) rather than
cpu_loop_exec_tb; this ensures that cpu_handle_exception is always
reached with zero icount_decr.u32.high unless another interrupt has
happened in the meanwhile.
Second, try to cause the exception at the beginning of
cpu_handle_exception, and exit immediately if the TB cannot
execute. With this change, interrupts are processed and
cpu_exec_nocache can make process.
Signed-off-by: Maria Klimushenkova <maria.klimushenkova@ispras.ru>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20171114081818.27640.33165.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a condition before overwriting exception_index fiels.
It is needed when exception_index is already set to some meaningful value.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20171114081812.27640.26372.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are still seeing signals during translation time when we walk over
a page protection boundary. This expands the check to ensure the host
PC is inside the code generation buffer. The original suggestion was
to check versus tcg_ctx.code_gen_ptr but as we now segment the
translation buffer we have to settle for just a general check for
being inside.
I've also fixed up the declaration to make it clear it can deal with
invalid addresses. A later patch will fix up the call sites.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20171108153245.20740-2-alex.bennee@linaro.org
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit ac03ee5331 narrowed the scope of the exclusive
region so it only covers when we're executing the TB, not when
we're generating it. However it missed that there is more than
one execution path out of cpu_tb_exec -- if the atomic insn
causes an exception then the code will longjmp out, skipping
the code to end the exclusive region. This causes QEMU to hang
the next time the CPU calls start_exclusive(), waiting for
itself to exit the region.
Move the "end the region" code out to the end of the
function so that it is run for both normal exit and also
for exit-via-longjmp. We have to use a volatile bool flag
to decide whether we need to end the region, because we
can longjump out of the codegen as well as the execution.
(For some reason this only reproduces for me with a clang
optimized build, not a gcc debug build.)
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fixes: ac03ee5331
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1509640536-32160-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Two or more threads might race while invalidating the same TB. We currently
do not check for this at all despite taking tb_lock, which means we would
wrongly invalidate the same TB more than once. This bug has actually been
hit by users: I recently saw a report on IRC, although I have yet to see
the corresponding test case.
Fix this by using qht_remove as the synchronization point; if it fails,
that means the TB has already been invalidated, and therefore there
is nothing left to do in tb_phys_invalidate.
Note that this solution works now that we still have tb_lock, and will
continue working once we remove tb_lock.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1508445114-4717-1-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This enables parallel TCG code generation. However, we do not take
advantage of it yet since tb_lock is still held during tb_gen_code.
In user-mode we use a single TCG context; see the documentation
added to tcg_region_init for the rationale.
Note that targets do not need any conversion: targets initialize a
TCGContext (e.g. defining TCG globals), and after this initialization
has finished, the context is cloned by the vCPU threads, each of
them keeping a separate copy.
TCG threads claim one entry in tcg_ctxs[] by atomically increasing
n_tcg_ctxs. Do not be too annoyed by the subsequent atomic_read's
of that variable and tcg_ctxs; they are there just to play nice with
analysis tools such as thread sanitizer.
Note that we do not allocate an array of contexts (we allocate
an array of pointers instead) because when tcg_context_init
is called, we do not know yet how many contexts we'll use since
the bool behind qemu_tcg_mttcg_enabled() isn't set yet.
Previous patches folded some TCG globals into TCGContext. The non-const
globals remaining are only set at init time, i.e. before the TCG
threads are spawned. Here is a list of these set-at-init-time globals
under tcg/:
Only written by tcg_context_init:
- indirect_reg_alloc_order
- tcg_op_defs
Only written by tcg_target_init (called from tcg_context_init):
- tcg_target_available_regs
- tcg_target_call_clobber_regs
- arm: arm_arch, use_idiv_instructions
- i386: have_cmov, have_bmi1, have_bmi2, have_lzcnt,
have_movbe, have_popcnt
- mips: use_movnz_instructions, use_mips32_instructions,
use_mips32r2_instructions, got_sigill (tcg_target_detect_isa)
- ppc: have_isa_2_06, have_isa_3_00, tb_ret_addr
- s390: tb_ret_addr, s390_facilities
- sparc: qemu_ld_trampoline, qemu_st_trampoline (build_trampolines),
use_vis3_instructions
Only written by tcg_prologue_init:
- 'struct jit_code_entry one_entry'
- aarch64: tb_ret_addr
- arm: tb_ret_addr
- i386: tb_ret_addr, guest_base_flags
- ia64: tb_ret_addr
- mips: tb_ret_addr, bswap32_addr, bswap32u_addr, bswap64_addr
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is groundwork for supporting multiple TCG contexts.
The naive solution here is to split code_gen_buffer statically
among the TCG threads; this however results in poor utilization
if translation needs are different across TCG threads.
What we do here is to add an extra layer of indirection, assigning
regions that act just like pages do in virtual memory allocation.
(BTW if you are wondering about the chosen naming, I did not want
to use blocks or pages because those are already heavily used in QEMU).
We use a global lock to serialize allocations as well as statistics
reporting (we now export the size of the used code_gen_buffer with
tcg_code_size()). Note that for the allocator we could just use
a counter and atomic_inc; however, that would complicate the gathering
of tcg_code_size()-like stats. So given that the region operations are
not a fast path, a lock seems the most reasonable choice.
The effectiveness of this approach is clear after seeing some numbers.
I used the bootup+shutdown of debian-arm with '-tb-size 80' as a benchmark.
Note that I'm evaluating this after enabling per-thread TCG (which
is done by a subsequent commit).
* -smp 1, 1 region (entire buffer):
qemu: flush code_size=83885014 nb_tbs=154739 avg_tb_size=357
qemu: flush code_size=83884902 nb_tbs=153136 avg_tb_size=363
qemu: flush code_size=83885014 nb_tbs=152777 avg_tb_size=364
qemu: flush code_size=83884950 nb_tbs=150057 avg_tb_size=373
qemu: flush code_size=83884998 nb_tbs=150234 avg_tb_size=373
qemu: flush code_size=83885014 nb_tbs=154009 avg_tb_size=360
qemu: flush code_size=83885014 nb_tbs=151007 avg_tb_size=370
qemu: flush code_size=83885014 nb_tbs=151816 avg_tb_size=367
That is, 8 flushes.
* -smp 8, 32 regions (80/32 MB per region) [i.e. this patch]:
qemu: flush code_size=76328008 nb_tbs=141040 avg_tb_size=356
qemu: flush code_size=75366534 nb_tbs=138000 avg_tb_size=361
qemu: flush code_size=76864546 nb_tbs=140653 avg_tb_size=361
qemu: flush code_size=76309084 nb_tbs=135945 avg_tb_size=375
qemu: flush code_size=74581856 nb_tbs=132909 avg_tb_size=375
qemu: flush code_size=73927256 nb_tbs=135616 avg_tb_size=360
qemu: flush code_size=78629426 nb_tbs=142896 avg_tb_size=365
qemu: flush code_size=76667052 nb_tbs=138508 avg_tb_size=368
Again, 8 flushes. Note how buffer utilization is not 100%, but it
is close. Smaller region sizes would yield higher utilization,
but we want region allocation to be rare (it acquires a lock), so
we do not want to go too small.
* -smp 8, static partitioning of 8 regions (10 MB per region):
qemu: flush code_size=21936504 nb_tbs=40570 avg_tb_size=354
qemu: flush code_size=11472174 nb_tbs=20633 avg_tb_size=370
qemu: flush code_size=11603976 nb_tbs=21059 avg_tb_size=365
qemu: flush code_size=23254872 nb_tbs=41243 avg_tb_size=377
qemu: flush code_size=28289496 nb_tbs=52057 avg_tb_size=358
qemu: flush code_size=43605160 nb_tbs=78896 avg_tb_size=367
qemu: flush code_size=45166552 nb_tbs=82158 avg_tb_size=364
qemu: flush code_size=63289640 nb_tbs=116494 avg_tb_size=358
qemu: flush code_size=51389960 nb_tbs=93937 avg_tb_size=362
qemu: flush code_size=59665928 nb_tbs=107063 avg_tb_size=372
qemu: flush code_size=38380824 nb_tbs=68597 avg_tb_size=374
qemu: flush code_size=44884568 nb_tbs=79901 avg_tb_size=376
qemu: flush code_size=50782632 nb_tbs=90681 avg_tb_size=374
qemu: flush code_size=39848888 nb_tbs=71433 avg_tb_size=372
qemu: flush code_size=64708840 nb_tbs=119052 avg_tb_size=359
qemu: flush code_size=49830008 nb_tbs=90992 avg_tb_size=362
qemu: flush code_size=68372408 nb_tbs=123442 avg_tb_size=368
qemu: flush code_size=33555560 nb_tbs=59514 avg_tb_size=378
qemu: flush code_size=44748344 nb_tbs=80974 avg_tb_size=367
qemu: flush code_size=37104248 nb_tbs=67609 avg_tb_size=364
That is, 20 flushes. Note how a static partitioning approach uses
the code buffer poorly, leading to many unnecessary flushes.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The helpers require the address and size to be page-aligned, so
do that before calling them.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is groundwork for supporting multiple TCG contexts.
To avoid scalability issues when profiling info is enabled, this patch
makes the profiling info counters distributed via the following changes:
1) Consolidate profile info into its own struct, TCGProfile, which
TCGContext also includes. Note that tcg_table_op_count is brought
into TCGProfile after dropping the tcg_ prefix.
2) Iterate over the TCG contexts in the system to obtain the total counts.
This change also requires updating the accessors to TCGProfile fields to
use atomic_read/set whenever there may be conflicting accesses (as defined
in C11) to them.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
The core of this patch is this change to tcg/tcg.h:
> -extern TCGContext tcg_ctx;
> +extern TCGContext tcg_init_ctx;
> +extern TCGContext *tcg_ctx;
Note that for now we set *tcg_ctx to whatever TCGContext is passed
to tcg_context_init -- in this case &tcg_init_ctx.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since commit 6e3b2bfd6 ("tcg: allocate TB structs before the
corresponding translated code") we are not fully utilizing
code_gen_buffer for translated code, and therefore are
incorrectly reporting the amount of translated code as well as
the average host TB size. Address this by:
- Making the conscious choice of misreporting the total translated code;
doing otherwise would mislead users into thinking "-tb-size" is not
honoured.
- Expanding tb_tree_stats to accurately count the bytes of translated code on
the host, and using this for reporting the average tb host size,
as well as the expansion ratio.
In the future we might want to consider reporting the accurate numbers for
the total translated code, together with a "bookkeeping/overhead" field to
account for the TB structs.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't really free anything in this function anymore; we just remove
the TB from the binary search tree.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a prerequisite for supporting multiple TCG contexts, since
we will have threads generating code in separate regions of
code_gen_buffer.
For this we need a new field (.size) in struct tb_tc to keep
track of the size of the translated code. This field uses a size_t
to avoid adding a hole to the struct, although really an unsigned
int would have been enough.
The comparison function we use is optimized for the common case:
insertions. Profiling shows that upon booting debian-arm, 98%
of comparisons are between existing tb's (i.e. a->size and b->size
are both !0), which happens during insertions (and removals, but
those are rare). The remaining cases are lookups. From reading the glib
sources we see that the first key is always the lookup key. However,
the code does not assume this to always be the case because this
behaviour is not guaranteed in the glib docs. However, we embed
this knowledge in the code as a branch hint for the compiler.
Note that tb_free does not free space in the code_gen_buffer anymore,
since we cannot easily know whether the tb is the last one inserted
in code_gen_buffer. The next patch in this series renames tb_free
to tb_remove to reflect this.
Performance-wise, lookups in tb_find_pc are the same as before:
O(log n). However, insertions are O(log n) instead of O(1), which
results in a small slowdown when booting debian-arm:
Performance counter stats for 'build/arm-softmmu/qemu-system-arm \
-machine type=virt -nographic -smp 1 -m 4096 \
-netdev user,id=unet,hostfwd=tcp::2222-:22 \
-device virtio-net-device,netdev=unet \
-drive file=img/arm/jessie-arm32.qcow2,id=myblock,index=0,if=none \
-device virtio-blk-device,drive=myblock \
-kernel img/arm/aarch32-current-linux-kernel-only.img \
-append console=ttyAMA0 root=/dev/vda1 \
-name arm,debug-threads=on -smp 1' (10 runs):
- Before:
8048.598422 task-clock (msec) # 0.931 CPUs utilized ( +- 0.28% )
16,974 context-switches # 0.002 M/sec ( +- 0.12% )
0 cpu-migrations # 0.000 K/sec
10,125 page-faults # 0.001 M/sec ( +- 1.23% )
35,144,901,879 cycles # 4.367 GHz ( +- 0.14% )
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
65,758,252,643 instructions # 1.87 insns per cycle ( +- 0.33% )
10,871,298,668 branches # 1350.707 M/sec ( +- 0.41% )
192,322,212 branch-misses # 1.77% of all branches ( +- 0.32% )
8.640869419 seconds time elapsed ( +- 0.57% )
- After:
8146.242027 task-clock (msec) # 0.923 CPUs utilized ( +- 1.23% )
17,016 context-switches # 0.002 M/sec ( +- 0.40% )
0 cpu-migrations # 0.000 K/sec
18,769 page-faults # 0.002 M/sec ( +- 0.45% )
35,660,956,120 cycles # 4.378 GHz ( +- 1.22% )
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
65,095,366,607 instructions # 1.83 insns per cycle ( +- 1.73% )
10,803,480,261 branches # 1326.192 M/sec ( +- 1.95% )
195,601,289 branch-misses # 1.81% of all branches ( +- 0.39% )
8.828660235 seconds time elapsed ( +- 0.38% )
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have curr_cflags, we can include CF_USE_ICOUNT
early and then remove it as necessary.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that all code generation has been converted to check CF_PARALLEL, we can
generate !CF_PARALLEL code without having yet set !parallel_cpus --
and therefore without having to be in the exclusive region during
cpu_exec_step_atomic.
While at it, merge cpu_exec_step into cpu_exec_step_atomic.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Thereby decoupling the resulting translated code from the current state
of the system.
The tb->cflags field is not passed to tcg generation functions. So
we add a field to TCGContext, storing there a copy of tb->cflags.
Most architectures have <= 32 registers, which results in a 4-byte hole
in TCGContext. Use this hole for the new field.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert all existing readers of tb->cflags to tb_cflags, so that we
use atomic_read and therefore avoid undefined behaviour in C11.
Note that the remaining setters/getters of the field are protected
by tb_lock, and therefore do not need conversion.
Luckily all readers access the field via 'tb->cflags' (so no foo.cflags,
bar->cflags in the code base), which makes the conversion easily
scriptable:
FILES=$(git grep 'tb->cflags' target include/exec/gen-icount.h \
accel/tcg/translator.c | cut -f1 -d':' | sort | uniq)
perl -pi -e 's/([^.>])tb->cflags/$1tb_cflags(tb)/g' $FILES
perl -pi -e 's/([a-z->.]*)(->|\.)tb->cflags/tb_cflags($1$2tb)/g' $FILES
Then manually fixed the few errors that checkpatch reported.
Compile-tested for all targets.
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We were generating code during tb_invalidate_phys_page_range,
check_watchpoint, cpu_io_recompile, and (seemingly) discarding
the TB, assuming that it would magically be picked up during
the next iteration through the cpu_exec loop.
Instead, record the desired cflags in CPUState so that we request
the proper TB so that there is no more magic.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will enable us to decouple code translation from the value
of parallel_cpus at any given time. It will also help us minimize
TB flushes when generating code via EXCP_ATOMIC.
Note that the declaration of parallel_cpus is brought to exec-all.h
to be able to define there the "curr_cflags" inline.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Background: s390x implements Low-Address Protection (LAP). If LAP is
enabled, writing to effective addresses (before any translation)
0-511 and 4096-4607 triggers a protection exception.
So we have subpage protection on the first two pages of every address
space (where the lowcore - the CPU private data resides).
By immediately invalidating the write entry but allowing the caller to
continue, we force every write access onto these first two pages into
the slow path. we will get a tlb fault with the specific accessed
addresses and can then evaluate if protection applies or not.
We have to make sure to ignore the invalid bit if tlb_fill() succeeds.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016202358.3633-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Most of the users of page_set_flags offset (page, page + len) as
the end points. One might consider this an error, since the other
users do supply an endpoint as the last byte of the region.
However, the first thing that page_set_flags does is round end UP
to the start of the next page. Which means computing page + len - 1
is in the end pointless. Therefore, accept this usage and do not
assert when given the exact size of the vm as the endpoint.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170708025030.15845-2-rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In preparation for adding tc.size to be able to keep track of
TB's using the binary search tree implementation from glib.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This prevents bit rot by ensuring the debug code is compiled when
building a user-mode target.
Unfortunately the helpers are user-mode-only so we cannot fully
get rid of the ifdef checks. Add a comment to explain this.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This gets rid of an ifdef check while ensuring that the debug code
is compiled, which prevents bit rot.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
And fix the following warning when DEBUG_TB_INVALIDATE is enabled
in translate-all.c:
CC mipsn32-linux-user/accel/tcg/translate-all.o
/data/src/qemu/accel/tcg/translate-all.c: In function ‘tb_alloc_page’:
/data/src/qemu/accel/tcg/translate-all.c:1201:16: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘tb_page_addr_t {aka unsigned int}’ [-Werror=format=]
printf("protecting code page: 0x" TARGET_FMT_lx "\n",
^
cc1: all warnings being treated as errors
/data/src/qemu/rules.mak:66: recipe for target 'accel/tcg/translate-all.o' failed
make[1]: *** [accel/tcg/translate-all.o] Error 1
Makefile:328: recipe for target 'subdir-mipsn32-linux-user' failed
make: *** [subdir-mipsn32-linux-user] Error 2
cota@flamenco:/data/src/qemu/build ((18f3fe1...) *$)$
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This gets rid of some ifdef checks while ensuring that the debug code
is compiled, which prevents bit rot.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This gets rid of a hole in struct TranslationBlock.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is unlikely that we will ever want to call this helper passing
an argument other than the current PC. So just remove the argument,
and use the pc we already get from cpu_get_tb_cpu_state.
This change paves the way to having a common "tb_lookup" function.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reusing the have_tb_lock name, which is also defined in translate-all.c,
makes code reviewing unnecessarily harder.
Avoid potential confusion by renaming the local have_tb_lock variable
to something else.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is only used by this object, and it's not exported to any other.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Whenever there is an overflow in code_gen_buffer (e.g. we run out
of space in it and have to flush it), the code_time profiling counter
ends up with an invalid value (that is, code_time -= profile_getclock(),
without later on getting += profile_getclock() due to the goto).
Fix it by using the ti variable, so that we only update code_time
when there is no overflow. Note that in case there is an overflow
we fail to account for the elapsed coding time, but this is quite rare
so we can probably live with it.
"info jit" before/after, roughly at the same time during debian-arm bootup:
- before:
Statistics:
TB flush count 1
TB invalidate count 4665
TLB flush count 998
JIT cycles -615191529184601 (-256329.804 s at 2.4 GHz)
translated TBs 302310 (aborted=0 0.0%)
avg ops/TB 48.4 max=438
deleted ops/TB 8.54
avg temps/TB 32.31 max=38
avg host code/TB 361.5
avg search data/TB 24.5
cycles/op -42014693.0
cycles/in byte -121444900.2
cycles/out byte -5629031.1
cycles/search byte -83114481.0
gen_interm time -0.0%
gen_code time 100.0%
optim./code time -0.0%
liveness/code time -0.0%
cpu_restore count 6236
avg cycles 110.4
- after:
Statistics:
TB flush count 1
TB invalidate count 4665
TLB flush count 1010
JIT cycles 1996899624 (0.832 s at 2.4 GHz)
translated TBs 297961 (aborted=0 0.0%)
avg ops/TB 48.5 max=438
deleted ops/TB 8.56
avg temps/TB 32.31 max=38
avg host code/TB 361.8
avg search data/TB 24.5
cycles/op 138.2
cycles/in byte 398.4
cycles/out byte 18.5
cycles/search byte 273.1
gen_interm time 14.0%
gen_code time 86.0%
optim./code time 19.4%
liveness/code time 10.3%
cpu_restore count 6372
avg cycles 111.0
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit f0aff0f124 ("cputlb: add assert_cpu_is_self checks") buried
the increment of tlb_flush_count under TLB_DEBUG. This results in
"info jit" always (mis)reporting 0 TLB flushes when !TLB_DEBUG.
Besides, under MTTCG tlb_flush_count is updated by several threads,
so in order not to lose counts we'd either have to use atomic ops
or distribute the counter, which is more scalable.
This patch does the latter by embedding tlb_flush_count in CPUArchState.
The global count is then easily obtained by iterating over the CPU list.
Note that this change also requires updating the accessors to
tlb_flush_count to use atomic_read/set whenever there may be conflicting
accesses (as defined in C11) to it.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The mmio path (see exec.c:prepare_mmio_access) already protects itself
against recursive locking and it makes sense to do the same for
io_readx/writex. Otherwise any helper running in the BQL context will
assert when it attempts to write to device memory as in the case of
the bug report.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
CC: Richard Jones <rjones@redhat.com>
CC: Paolo Bonzini <bonzini@gnu.org>
CC: qemu-stable@nongnu.org
Message-Id: <20170921110625.9500-1-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170912211934.20919-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20170911213328.9701-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170911213328.9701-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170911213328.9701-3-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The header is only used by accel/tcg/cputlb.c so we can
move it to the accel/tcg/ folder, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
[PMD: reword commit title to match series]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170911213328.9701-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A new shared header tcg-pool.inc.c adds new_pool_label,
for registering a tcg_target_ulong to be emitted after
the generated code, plus relocation data to install a
pointer to the data.
A new pointer is added to the TCGContext, so that we
dump the constant pool as data, not code.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace the USE_DIRECT_JUMP ifdef with a TCG_TARGET_HAS_direct_jump
boolean test. Replace the tb_set_jmp_target1 ifdef with an unconditional
function tb_target_set_jmp_target.
While we're touching all backends, add a parameter for tb->tc_ptr;
we're going to need it shortly for some backends.
Move tb_set_jmp_target and tb_add_jump from exec-all.h to cpu-exec.c.
This opens the possibility for TCG_TARGET_HAS_direct_jump to be
a runtime decision -- based on host cpu capabilities, the size of
code_gen_buffer, or a future debugging switch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002073981.22386.9870422422367410100.stgit@frigg.lan>
[rth: Moved max_insns adjustment from tb_start to init_disas_context.
Removed pc_next return from translate_insn.
Removed tcg_check_temp_count from generic loop.
Moved gen_io_end to exactly match gen_io_start.
Use qemu_log instead of error_report for temporary leaks.
Moved TB size/icount assignments before disas_log.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
Call the new cpu_transaction_failed() hook at the places where
CPU generated code interacts with the memory system:
io_readx()
io_writex()
get_page_addr_code()
Any access from C code (eg via cpu_physical_memory_rw(),
address_space_rw(), ld/st_*_phys()) will *not* trigger CPU exceptions
via cpu_transaction_failed(). Handling for transactions failures for
this kind of call should be done by using a function which returns a
MemTxResult and treating the failure case appropriately in the
calling code.
In an ideal world we would not generate CPU exceptions for
instruction fetch failures in get_page_addr_code() but instead wait
until the code translation process tried a load and it failed;
however that change would require too great a restructuring and
redesign to attempt at this point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Needed to implement a target-agnostic gen_intermediate_code()
in the future.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002025498.22386.18051908483085660588.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Every vCPU now uses a separate set of TBs for each set of dynamic
tracing event state values. Each set of TBs can be used by any number of
vCPUs to maximize TB reuse when vCPUs have the same tracing state.
This feature is later used by tracetool to optimize tracing of guest
code events.
The maximum number of TB sets is defined as 2^E, where E is the number
of events that have the 'vcpu' property (their state is stored in
CPUState->trace_dstate).
For this to work, a change on the dynamic tracing state of a vCPU will
force it to flush its virtual TB cache (which is only indexed by
address), and fall back to the physical TB cache (which now contains the
vCPU's dynamic tracing state as part of the hashing function).
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 149915775266.6295.10060144081246467690.stgit@frigg.lan
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This check is redundant because it is already performed by the only
caller of dump_exec_info -- the caller was updated by b7da97eef
("monitor: Check whether TCG is enabled before running the "info jit"
code").
Checking twice wouldn't necessarily be too bad, but here the check also
returns with tb_lock held. So we can either do the check before tb_lock is
acquired, or just get rid of it. Given that it is redundant, I am going
for the latter option.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We use ADRP+ADD to compute the target address for goto_tb. This patch
introduces the NOP instruction which is used to align the above
instruction pair so that we can use one atomic instruction to patch
the destination offsets.
CC: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20170630143614.31059-2-bobby.prani@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Change the tcg_enabled() and make sure user build still enable tcg
even x86 softmmu disable tcg.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
translate-common.c will not be available anymore with --disable-tcg,
so we cannot leave cpu_interrupt_handler there.
Move the TCG-specific handler to accel/tcg/tcg-all.c, and adopt
KVM's handler as the default one, since it works just as well for
Xen and qtest.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
translate-all.c will be disabled if tcg is disabled in the build,
so page_size_init() function and related variables will be moved
to exec.c file.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 1f5c00cfdb ("qom/cpu: move tlb_flush to cpu_common_reset")
moved the call to tlb_flush() from the target-specific reset handlers
into the common code qom/cpu.c file, and protected the call with
"#ifdef CONFIG_SOFTMMU" to avoid that it is called for linux-user
only targets. But since qom/cpu.c is common code, CONFIG_SOFTMMU is
*never* defined here, so the tlb_flush() was simply never executed
anymore. Fix it by introducing a wrapper for tlb_flush() in a file
that is re-compiled for each target, i.e. in translate-all.c.
Fixes: 1f5c00cfdb
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1498454578-18709-5-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some code paths can lead to atomic accesses racing with memset()
on cpu->tb_jmp_cache, which can result in torn reads/writes
and is undefined behaviour in C11.
These torn accesses are unlikely to show up as bugs, but from code
inspection they seem possible. For example, tb_phys_invalidate does:
/* remove the TB from the hash list */
h = tb_jmp_cache_hash_func(tb->pc);
CPU_FOREACH(cpu) {
if (atomic_read(&cpu->tb_jmp_cache[h]) == tb) {
atomic_set(&cpu->tb_jmp_cache[h], NULL);
}
}
Here atomic_set might race with a concurrent memset (such as the
ones scheduled via "unsafe" async work, e.g. tlb_flush_page) and
therefore we might end up with a torn pointer (or who knows what,
because we are under undefined behaviour).
This patch converts parallel accesses to cpu->tb_jmp_cache to use
atomic primitives, thereby bringing these accesses back to defined
behaviour. The price to pay is to potentially execute more instructions
when clearing cpu->tb_jmp_cache, but given how infrequently they happen
and the small size of the cache, the performance impact I have measured
is within noise range when booting debian-arm.
Note that under "safe async" work (e.g. do_tb_flush) we could use memset
because no other vcpus are running. However I'm keeping these accesses
atomic as well to keep things simple and to avoid confusing analysis
tools such as ThreadSanitizer.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1497486973-25845-1-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This introduces a special callback which allows to run code from some MMIO
devices.
SysBusDevice with a MemoryRegion which implements the request_ptr callback will
be notified when the guest try to execute code from their offset. Then it will
be able to eg: pre-load some code from an SPI device or ask a pointer from an
external simulator, etc..
When the pointer or the data in it are no longer valid the device has to
invalidate it.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
get_page_addr_code(..) does a cpu_ldub_code to fill the tlb:
This can lead to some side effects if a device is mapped at this address.
So this patch replaces the cpu_memory_ld by a tlb_fill.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This just moves the code before VICTIM_TLB_HIT macro definition
so we can use it.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This replaces env1 and page_index variables by env and index
so we can use VICTIM_TLB_HIT macro later.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
move tcg-runtime.c, translate-all.(ch) and translate-common.c into
accel/tcg/ subdirectory and updated related trace-events file.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <1496383606-18060-4-git-send-email-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
move cputlb.c, cpu-exec-common.c and cpu-exec.c related tcg exec
file into accel/tcg/ subdirectory.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <1496383606-18060-3-git-send-email-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
there are some types of accelerators in qemu, and all accelerators
have their own file except tcg. tcg accelerator is also defined in
accel.c file. tcg accelerator file will be splited from accel.c and
re-name to tcg-all.c. accel/ directory will be created to include
kvm and tcg related files.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <1496383606-18060-2-git-send-email-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
