Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Combine 5 output pointer arguments from get_phys_addr
into a single struct. Adjust all callers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When requested, the alignment for VLD4.32 is 8 and not 16.
See ARM documentation about VLD4 encoding:
ebytes = 1 << UInt(size);
if size == '10' then
alignment = if a == '0' then 1 else 8;
else
alignment = if a == '0' then 1 else 4*ebytes;
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220914105058.2787404-1-chigot@adacore.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the ID registers for TCG's '-cpu max' to report a FEAT_PMUv3p5
compliant PMU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822132358.3524971-11-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With FEAT_PMUv3p5, the event counters are now 64 bit, rather than 32
bit. (Previously, only the cycle counter could be 64 bit, and other
event counters were always 32 bits). For any given event counter,
whether the overflow event is noted for overflow from bit 31 or from
bit 63 is controlled by a combination of PMCR.LP, MDCR_EL2.HLP and
MDCR_EL2.HPMN.
Implement the 64-bit event counter handling. We choose to make our
counters always 64 bits, and mask out the top 32 bits on read or
write of PMXEVCNTR for CPUs which don't have FEAT_PMUv3p5.
(Note that the changes to pmenvcntr_op_start() and
pmenvcntr_op_finish() bring their logic closer into line with that of
pmccntr_op_start() and pmccntr_op_finish(), which already had to cope
with the overflow being either at 32 or 64 bits.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822132358.3524971-10-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
FEAT_PMUv3p5 introduces new bits which disable the cycle
counter from counting:
* MDCR_EL2.HCCD disables the counter when in EL2
* MDCR_EL3.SCCD disables the counter when Secure
Add the code to support these bits.
(Note that there is a third documented counter-disable
bit, MDCR_EL3.MCCD, which disables the counter when in
EL3. This is not present until FEAT_PMUv3p7, so is
out of scope for now.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822132358.3524971-9-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Our feature test functions that check the PMU version are named
isar_feature_{aa32,aa64,any}_pmu_8_{1,4}. This doesn't match the
current Arm ARM official feature names, which are FEAT_PMUv3p1 and
FEAT_PMUv3p4. Rename these functions to _pmuv3p1 and _pmuv3p4.
This commit was created with:
sed -i -e 's/pmu_8_/pmuv3p/g' target/arm/*.[ch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822132358.3524971-8-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In pmccntr_op_finish() and pmevcntr_op_finish() we calculate the next
point at which we will get an overflow and need to fire the PMU
interrupt or set the overflow flag. We do this by calculating the
number of nanoseconds to the overflow event and then adding it to
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL). However, we don't check
whether that signed addition overflows, which can happen if the next
PMU interrupt would happen massively far in the future (250 years or
more).
Since QEMU assumes that "when the QEMU_CLOCK_VIRTUAL rolls over" is
"never", the sensible behaviour in this situation is simply to not
try to set the timer if it would be beyond that point. Detect the
overflow, and skip setting the timer in that case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822132358.3524971-7-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The logic in pmu_counter_enabled() for handling the 'prohibit event
counting' bits MDCR_EL2.HPMD and MDCR_EL3.SPME is written in a way
that assumes that EL2 is never Secure. This used to be true, but the
architecture now permits Secure EL2, and QEMU can emulate this.
Refactor the prohibit logic so that we effectively OR together
the various prohibit bits when they apply, rather than trying to
construct an if-else ladder where any particular state of the CPU
ends up in exactly one branch of the ladder.
This fixes the Secure EL2 case and also is a better structure for
adding the PMUv8.5 bits MDCR_EL2.HCCD and MDCR_EL3.SCCD.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822132358.3524971-6-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The architecture requires that if PMCR.LC is set (for a 64-bit cycle
counter) then PMCR.D (which enables the clock divider so the counter
ticks every 64 cycles rather than every cycle) should be ignored. We
were always honouring PMCR.D; fix the bug so we correctly ignore it
in this situation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822132358.3524971-5-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The PMU cycle and event counter infrastructure design requires that
operations on the PMU register fields are wrapped in pmu_op_start()
and pmu_op_finish() calls (or their more specific pmmcntr and
pmevcntr equivalents). This includes any changes to registers which
affect whether the counter should be enabled or disabled, but we
forgot to do this.
The effect of this bug is that in sequences like:
* disable the cycle counter (PMCCNTR) using the PMCNTEN register
* write a value such as 0xfffff000 to the PMCCNTR
* restart the counter by writing to PMCNTEN
the value written to the cycle counter is corrupted, and it starts
counting from the wrong place. (Essentially, we fail to record that
the QEMU_CLOCK_VIRTUAL timestamp when the counter should be considered
to have started counting is the point when PMCNTEN is written to enable
the counter.)
Add the necessary bracketing calls, so that updates to the various
registers which affect whether the PMU is counting are handled
correctly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822132358.3524971-4-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
pmu_counter_mask() accidentally returns a value with bits [63:32]
set, because the expression it returns is evaluated as a signed value
that gets sign-extended to 64 bits. Force the whole expression to be
evaluated with 64-bit arithmetic with ULL suffixes.
The main effect of this bug was that a guest could write to the bits
in the high half of registers like PMCNTENSET_EL0 that are supposed
to be RES0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822132358.3524971-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the cycle counter overflows, we are intended to set bit 31 in PMOVSR
to indicate this. However a missing ULL suffix means that we end up
setting all of bits 63-31. Fix the bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822132358.3524971-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix a missing space before a comment terminator.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220819110052.2942289-7-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The architectural feature FEAT_ETS (Enhanced Translation
Synchronization) is a set of tightened guarantees about memory
ordering involving translation table walks:
* if memory access RW1 is ordered-before memory access RW2 then it
is also ordered-before any translation table walk generated by RW2
that generates a translation fault, address size fault or access
fault
* TLB maintenance on non-exec-permission translations is guaranteed
complete after a DSB (ie it does not need the context
synchronization event that you have to have if you don’t have
FEAT_ETS)
For QEMU’s implementation we don’t reorder translation table walk
accesses, and we guarantee to finish the TLB maintenance as soon as
the TLB op is done (the tlb_flush functions will complete at the end
of the TLB, and TLB ops always end the TB because they’re sysreg
writes).
So we’re already compliant and all we need to do is say so in the ID
registers for the 'max' CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220819110052.2942289-6-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In Armv8.6, a new AArch32 ID register ID_DFR1 is defined; implement
it. We don't have any CPUs with features that they need to advertise
here yet, but plumbing in the ID register gives it the right name
when debugging and will help in future when we do add a CPU that
has non-zero ID_DFR1 fields.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220819110052.2942289-5-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In Armv8.6 a new AArch32 ID register ID_MMFR5 is defined.
Implement this; we want to be able to use it to report to
the guest that we implement FEAT_ETS.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220819110052.2942289-4-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The code that reads the AArch32 ID registers from KVM in
kvm_arm_get_host_cpu_features() does so almost but not quite in
encoding order. Move the read of ID_PFR2 down so it's really in
encoding order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220819110052.2942289-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the AArch32 ID register scheme, coprocessor registers with
encoding cp15, 0, c0, c{0-7}, {0-7} are all in the space covered by
what in v6 and v7 was called the "CPUID scheme", and are supposed to
RAZ if they're not allocated to a specific ID register. For our
pre-v8 CPUs we get this right, because the regdefs in
id_pre_v8_midr_cp_reginfo[] cover these RAZ requirements. However
for v8 we failed to put in the necessary patterns to cover this, so
we end up UNDEFing on everything we didn't have an ID register for.
This is a problem because in Armv8 some encodings in 0, c0, c3, {0-7}
are now being used for new ID registers, and guests might thus start
trying to read them. (We already have one of these: ID_PFR2.)
For v8 CPUs, we already have regdefs for 0, c0, c{0-2}, {0-7} (that
is, the space is completely allocated with no reserved spaces). Add
entries to v8_idregs[] covering 0, c0, c3, {0-7}:
* c3, {0-2} is the reserved AArch32 space corresponding to the
AArch64 MVFR[012]_EL1
* c3, {3,5,6,7} are reserved RAZ for both AArch32 and AArch64
(in fact some of these are given defined meanings in Armv8.6,
but we don't implement them yet)
* c3, 4 is ID_PFR2 (already defined)
We then programmatically add RAZ patterns for AArch32 for
0, c0, c{4..15}, {0-7}:
* c4-c7 are unused, and not shared with AArch64 (these
are the encodings corresponding to where the AArch64
specific ID registers live in the system register space)
* c8-c15 weren't required to RAZ in v6/v7, but v8 extends
the AArch32 reserved-should-RAZ space to cover these;
the equivalent area of the AArch64 sysreg space is not
defined as must-RAZ
Note that the architecture allows some registers in this space
to return an UNKNOWN value; we always return 0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220819110052.2942289-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add cortex A35 core and enable it for virt board.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220819002015.1663247-1-wuhaotsh@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Honour the commandline -semihosting-config userspace=on option,
instead of never permitting userspace semihosting calls in system
emulation mode, by passing the correct value to the is_userspace
argument of semihosting_enabled(), instead of manually checking and
always forbidding semihosting if the guest is in userspace and this
isn't the linux-user build.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822141230.3658237-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently our semihosting implementations generally prohibit use of
semihosting calls in system emulation from the guest userspace. This
is a very long standing behaviour justified originally "to provide
some semblance of security" (since code with access to the
semihosting ABI can do things like read and write arbitrary files on
the host system). However, it is sometimes useful to be able to run
trusted guest code which performs semihosting calls from guest
userspace, notably for test code. Add a command line suboption to
the existing semihosting-config option group so that you can
explicitly opt in to semihosting from guest userspace with
-semihosting-config userspace=on
(There is no equivalent option for the user-mode emulator, because
there by definition all code runs in userspace and has access to
semihosting already.)
This commit adds the infrastructure for the command line option and
adds a bool 'is_user' parameter to the function
semihosting_userspace_enabled() that target code can use to check
whether it should be permitting the semihosting call for userspace.
It mechanically makes all the callsites pass 'false', so they
continue checking "is semihosting enabled in general". Subsequent
commits will make each target that implements semihosting honour the
userspace=on option by passing the correct value and removing
whatever "don't do this for userspace" checking they were doing by
hand.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822141230.3658237-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass these along to translator_loop -- pc may be used instead
of tb->pc, and host_pc is currently unused. Adjust all targets
at one time.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The newly added neoverse-n1 CPU has ID register values which indicate
the presence of the Statistical Profiling Extension, because the real
hardware has this feature. QEMU's TCG emulation does not yet
implement SPE, though (not even as a minimal stub implementation), so
guests will crash if they try to use it because the SPE system
registers don't exist.
Force ID_AA64DFR0_EL1.PMSVer to 0 in CPU realize for TCG, so that
we don't advertise to the guest a feature that doesn't exist.
(We could alternatively do this by editing the value that
aarch64_neoverse_n1_initfn() sets for this ID register, but
suppressing the field in realize means we won't re-introduce this bug
when we add other CPUs that have SPE in hardware, such as the
Neoverse-V1.)
An example of a non-booting guest is current mainline Linux (5.19),
when booting in EL2 on the virt board (ie with -machine
virtualization=on).
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20220811131127.947334-1-peter.maydell@linaro.org
When the user queries CPU models via QMP there is a 'deprecated' flag
present, however, this is not done for the CLI '-cpu help' command.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The test for the IF block indicates no ID registers are exposed, much
less host support for SVE. Move the SVE probe into the ELSE block.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220726045828.53697-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because we weren't setting this flag, our probe of ID_AA64ZFR0
was always returning zero. This also obviates the adjustment
of ID_AA64PFR0, which had sanitized the SVE field.
The effects of the bug are not visible, because the only thing that
ID_AA64ZFR0 is used for within qemu at present is tcg translation.
The other tests for SVE within KVM are via ID_AA64PFR0.SVE.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220726045828.53697-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Indication for support for SVE will not depend on whether we
perform the query on the main kvm_state or the temp vcpu.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220726045828.53697-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some files wrongly contain the same word twice in a row.
One of them should be removed or replaced.
Message-Id: <20220722145859.1952732-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
perror() is designed to append the decoded errno value to a
string. This, however, only makes sense if we called something that
actually sets errno prior to that.
For the callers that check for split irqchip support that is not the
case, and we end up with confusing error messages that end in
"success". Use error_report() instead.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20220728142446.438177-1-cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit 7390e0e9ab, we added support for SME loads and stores.
Unlike SVE loads and stores, these include handling of 128-bit
elements. The SME load/store functions call down into the existing
sve_cont_ldst_elements() function, which uses the element size MO_*
value as an index into the pred_esz_masks[] array. Because this code
path now has to handle MO_128, we need to add an extra element to the
array.
This bug was spotted by Coverity because it meant we were reading off
the end of the array.
Resolves: Coverity CID 1490539, 1490541, 1490543, 1490544, 1490545,
1490546, 1490548, 1490549, 1490550, 1490551, 1490555, 1490557,
1490558, 1490560, 1490561, 1490563
Fixes: 7390e0e9ab ("target/arm: Implement SME LD1, ST1")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220718100144.3248052-1-peter.maydell@linaro.org
The architecture requires that for faults on loads and stores which
do writeback, the syndrome information does not have the ISS
instruction syndrome information (i.e. ISV is 0). We got this wrong
for the load and store instructions covered by disas_ldst_reg_imm9().
Calculate iss_valid correctly so that if the insn is a writeback one
it is false.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1057
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220715123323.1550983-1-peter.maydell@linaro.org
In regime_tcr() we return the appropriate TCR register for the
translation regime. For Secure EL2, we return the VSTCR_EL2 value,
but in this translation regime some fields that control behaviour are
in VTCR_EL2. When this code was originally written (as the comment
notes), QEMU didn't care about any of those fields, but we have since
added support for features such as LPA2 which do need the values from
those fields.
Synthesize a TCR value by merging in the relevant VTCR_EL2 fields to
the VSTCR_EL2 value.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1103
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-8-peter.maydell@linaro.org
Change the representation of the TCR_EL* registers in the CPU state
struct from struct TCR to uint64_t. This allows us to drop the
custom vmsa_ttbcr_raw_write() function, moving the "enforce RES0"
checks to their more usual location in the writefn
vmsa_ttbcr_write(). We also don't need the resetfn any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-7-peter.maydell@linaro.org
Change the representation of the VSTCR_EL2 and VTCR_EL2 registers in
the CPU state struct from struct TCR to uint64_t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-6-peter.maydell@linaro.org
We have a bug in our handling of accesses to the AArch32 VTCR
register on big-endian hosts: we were not adjusting the part of the
uint64_t field within TCR that the generated code would access. That
can be done with offsetoflow32(), by using an ARM_CP_STATE_BOTH cpreg
struct, or by defining a full set of read/write/reset functions --
the various other TCR cpreg structs used one or another of those
strategies, but for VTCR we did not, so on a big-endian host VTCR
accesses would touch the wrong half of the register.
Use offsetoflow32() in the VTCR register struct. This works even
though the field in the CPU struct is currently a struct TCR, because
the first field in that struct is the uint64_t raw_tcr.
None of the other TCR registers have this bug -- either they are
AArch64 only, or else they define resetfn, writefn, etc, and
expect to be passed the full struct pointer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-5-peter.maydell@linaro.org
The only caller of regime_tcr() is now regime_tcr_value(); fold the
two together, and use the shorter and more natural 'regime_tcr'
name for the new function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-4-peter.maydell@linaro.org
In get_level1_table_address(), instead of using precalculated values
of mask and base_mask from the TCR struct, calculate them directly
(in the same way we currently do in vmsa_ttbcr_raw_write() to
populate the TCR struct fields).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-3-peter.maydell@linaro.org
The regime_tcr() function returns a pointer to a struct TCR
corresponding to the TCR controlling a translation regime. The
struct TCR has the raw value of the register, plus two fields mask
and base_mask which are used as a small optimization in the case of
32-bit short-descriptor lookups. Almost all callers of regime_tcr()
only want the raw register value. Define and use a new
regime_tcr_value() function which returns only the raw 64-bit
register value.
This is a preliminary to removing the 32-bit short descriptor
optimization -- it only saves a handful of bit operations, which is
tiny compared to the overhead of doing a page table walk at all, and
the TCR struct is awkward and makes fixing
https://gitlab.com/qemu-project/qemu/-/issues/1103 unnecessarily
difficult.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-2-peter.maydell@linaro.org
The documentation for PROT_MTE says that it cannot be cleared
by mprotect. Further, the implementation of the VM_ARCH_CLEAR bit,
contains PROT_BTI confiming that bit should be cleared.
Introduce PAGE_TARGET_STICKY to allow target/arch/cpu.h to control
which bits may be reset during page_set_flags. This is sort of the
opposite of VM_ARCH_CLEAR, but works better with qemu's PAGE_* bits
that are separate from PROT_* bits.
Reported-by: Vitaly Buka <vitalybuka@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220711031420.17820-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were only checking for SVE disabled and not taking into
account PSTATE.SM to check SME disabled, which resulted in
vectors being incorrectly truncated.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220713045848.217364-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When PSTATE.SM, VL = SVL even if SVE is disabled.
This is visible in kselftest ssve-test.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220713045848.217364-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable SME, TPIDR2_EL0, and FA64 if supported by the cpu.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-45-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There's no reason to set CPACR_EL1.ZEN if SVE disabled.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-44-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Note that SME remains effectively disabled for user-only,
because we do not yet set CPACR_EL1.SMEN. This needs to
wait until the kernel ABI is implemented.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can handle both exception entry and exception return by
hooking into aarch64_sve_change_el.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is an SVE instruction that operates using the SVE vector
length but that it is present only if SME is implemented.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is an SVE instruction that operates using the SVE vector
length but that it is present only if SME is implemented.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is an SVE instruction that operates using the SVE vector
length but that it is present only if SME is implemented.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is SMOPA, SUMOPA, USMOPA_s, UMOPA, for both Int8 and Int16.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can reuse the SVE functions for LDR and STR, passing in the
base of the ZA vector and a zero offset.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a TCGv_ptr base argument, which will be cpu_env for SVE.
We will reuse this for SME save and restore array insns.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We cannot reuse the SVE functions for LD[1-4] and ST[1-4],
because those functions accept only a Zreg register number.
For SME, we want to pass a pointer into ZA storage.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can reuse the SVE functions for implementing moves to/from
horizontal tile slices, but we need new ones for moves to/from
vertical tile slices.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These SME instructions are nominally within the SVE decode space,
so we add them to sve.decode and translate-sve.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pseudocode for CheckSVEEnabled gains a check for Streaming
SVE mode, and for SME present but SVE absent.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These functions will be used to verify that the cpu
is in the correct state for a given instruction.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap if full
a64 support is not enabled in streaming mode. In this case, introduce
PRF_ns (prefetch non-streaming) to handle the checks.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark ADR as a non-streaming instruction, which should trap
if full a64 support is not enabled in streaming mode.
Removing entries from sme-fa64.decode is an easy way to see
what remains to be done.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This new behaviour is in the ARM pseudocode function
AArch64.CheckFPAdvSIMDEnabled, which applies to AArch32
via AArch32.CheckAdvSIMDOrFPEnabled when the EL to which
the trap would be delivered is in AArch64 mode.
Given that ARMv9 drops support for AArch32 outside EL0, the trap EL
detection ought to be trivially true, but the pseudocode still contains
a number of conditions, and QEMU has not yet committed to dropping A32
support for EL[12] when v9 features are present.
Since the computation of SME_TRAP_NONSTREAMING is necessarily different
for the two modes, we might as well preserve bits within TBFLAG_ANY and
allocate separate bits within TBFLAG_A32 and TBFLAG_A64 instead.
Note that DDI0616A.a has typos for bits [22:21] of LD1RO in the table
of instructions illegal in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes the build rules for the decoder, and the
new file for translation, but excludes any instructions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Dump SVCR, plus use the correct access check for Streaming Mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 39a1fd2528 we fixed a bug in the handling of LPAE block
descriptors where we weren't correctly zeroing out some RES0 bits.
However this fix has a bug because the calculation of the mask is
done at the wrong width: in
descaddr &= ~(page_size - 1);
page_size is a target_ulong, so in the 'qemu-system-arm' binary it is
only 32 bits, and the effect is that we always zero out the top 32
bits of the calculated address. Fix the calculation by forcing the
mask to be calculated with the same type as descaddr.
This only affects 32-bit CPUs which support LPAE (e.g. cortex-a15)
when used on board models which put RAM or devices above the 4GB
mark and when the 'qemu-system-arm' executable is being used.
It was also masked in 7.0 by the main bug reported in
https://gitlab.com/qemu-project/qemu/-/issues/1078 where the
virt board incorrectly does not enable 'highmem' for 32-bit CPUs.
The workaround is to use 'qemu-system-aarch64' with the same
command line.
Reported-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220627134620.3190252-1-peter.maydell@linaro.org
Fixes: 39a1fd2528 ("target/arm: Fix handling of LPAE block descriptors")
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The architecture defines the OS DoubleLock as a register which
(similarly to the OS Lock) suppresses debug events for use in CPU
powerdown sequences. This functionality is required in Arm v7 and
v8.0; from v8.2 it becomes optional and in v9 it must not be
implemented.
Currently in QEMU we implement the OSDLR_EL1 register as a NOP. This
is wrong both for the "feature implemented" and the "feature not
implemented" cases: if the feature is implemented then the DLK bit
should read as written and cause suppression of debug exceptions, and
if it is not implemented then the bit must be RAZ/WI.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Starting with v7 of the debug architecture, there are three extra
ID registers that add information on top of that provided in
DBGDIDR. These are DBGDEVID, DBGDEVID1 and DBGDEVID2. In the
v7 debug architecture, DBGDEVID is optional, present only of
DBGDIDR.DEVID_imp is set. In v7.1 all three must be present.
Implement the missing registers. Note that we only need to set the
values in the ARMISARegisters struct for the CPUs Cortex-A7, A15,
A53, A57 and A72 (plus the 32-bit 'max' which uses the Cortex-A53
values): earlier CPUs didn't implement v7 of the architecture, and
our other 64-bit CPUs (Cortex-A76, Neoverse-N1 and A64fx) don't have
AArch32 support at EL1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220630194116.3438513-5-peter.maydell@linaro.org
The "OS Lock" in the Arm debug architecture is a way for software
to suppress debug exceptions while it is trying to power down
a CPU and save the state of the breakpoint and watchpoint
registers. In QEMU we implemented the support for writing
the OS Lock bit via OSLAR_EL1 and reading it via OSLSR_EL1,
but didn't implement the actual behaviour.
The required behaviour with the OS Lock set is:
* debug exceptions (apart from BKPT insns) are suppressed
* some MDSCR_EL1 bits allow write access to the corresponding
EDSCR external debug status register that they shadow
(we can ignore this because we don't implement external debug)
* similarly with the OSECCR_EL1 which shadows the EDECCR
(but we don't implement OSECCR_EL1 anyway)
Implement the missing behaviour of suppressing debug
exceptions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220630194116.3438513-4-peter.maydell@linaro.org
The target/arm/helper.c file is very long and is a grabbag of all
kinds of functionality. We have already a debug_helper.c which has
code for implementing architectural debug. Move the code which
defines the debug-related system registers out to this file also.
This affects the define_debug_regs() function and the various
functions and arrays which are used only by it.
The functions raw_write() and arm_mdcr_el2_eff() and
define_debug_regs() now need to be global rather than local to
helper.c; everything else is pure code movement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220630194116.3438513-3-peter.maydell@linaro.org
Before moving debug system register helper functions to a
different file, fix the code style issues (mostly block
comment syntax) so checkpatch doesn't complain about the
code-motion patch.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220630194116.3438513-2-peter.maydell@linaro.org
Fixes a bug in that we were not honoring MTE from user-only
SVE. Copy the user-only MTE logic from allocation_tag_mem
into sve_probe_page.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The comment was correct, but the test was not:
disable mte if tagged is *not* set.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The disassembly via capstone should be superiour to our old vixl
sources nowadays, so let's finally cut this old disassembler out
of the QEMU source tree.
Message-Id: <20220603164249.112459-1-thuth@redhat.com>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Move the ARM and RISCV specific helpers into
their own header file.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform the cleanup in the FIXME comment in common_semi_gdb_syscall.
Do not modify guest registers until the syscall is complete,
which in the gdbstub case is asynchronous.
In the synchronous non-gdbstub case, use common_semi_set_ret
to set the result. Merge set_swi_errno into common_semi_cb.
Rely on the latter for combined return value / errno setting.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In machvirt_init we create a cpu but do not fully initialize it.
Thus the propagation of V7VE to LPAE has not been done, and we
compute the wrong value for some v7 cpus, e.g. cortex-a15.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1078
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reported-by: He Zhe <zhe.he@windriver.com>
Message-id: 20220619001541.131672-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the code from hw/arm/virt.c that is supposed
to handle v7 into the one function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reported-by: He Zhe <zhe.he@windriver.com>
Message-id: 20220619001541.131672-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will need these functions in translate-sme.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need SVL separate from VL for RDSVL et al, as well as
ZA storage loads and stores, which do not require PSTATE.SM.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When Streaming SVE mode is enabled, the size is taken from
SMCR_ELx instead of ZCR_ELx. The format is shared, but the
set of vector lengths is not. Further, Streaming SVE does
not require any particular length to be supported.
Adjust sve_vqm1_for_el to pass the current value of PSTATE.SM
to the new function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mirror the properties for SVE. The main difference is
that any arbitrary set of powers of 2 may be supported,
and not the stricter constraints that apply to SVE.
Include a property to control FEAT_SME_FA64, as failing
to restrict the runtime to the proper subset of insns
could be a major point for bugs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220620175235.60881-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These functions are not used outside cpu64.c,
so make them static.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the aa32-only inline fallbacks,
and just use a couple of ifdefs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
