PCIE ports only have one slot, slot 0. Hence, non-zero slots are not available
for PCIE devices on PCIE root ports. Fix test_acpi_q35_tcg_no_acpi_hotplug()
so that the test does not use them.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230705115925.5339-3-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are going to fix bio-tables-test in the next patch and hence need to
make sure the acpi tests continue to pass.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230705115925.5339-2-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With TPM CRM device, vhost-vdpa reports an error when it tries
to register a listener for a non aligned memory region:
qemu-system-x86_64: vhost_vdpa_listener_region_add received unaligned region
qemu-system-x86_64: vhost_vdpa_listener_region_del received unaligned region
This error can be confusing for the user whereas we only need to skip
the region (as it's already done after the error_report())
Rather than introducing a special case for TPM CRB memory section
to not display the message in this case, simply replace the
error_report() by a trace function (with more information, like the
memory region name).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20230704071931.575888-2-lvivier@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to VirtIO standard, "The class, command and
command-specific-data are set by the driver,
and the device sets the ack byte.
There is little it can do except issue a diagnostic
if ack is not VIRTIO_NET_OK."
Therefore, QEMU should stop sending the queued SVQ commands and
cancel the device startup if the device's ack is not VIRTIO_NET_OK.
Yet the problem is that, vhost_vdpa_net_load_offloads() returns 1 based on
`*s->status != VIRTIO_NET_OK` when the device's ack is VIRTIO_NET_ERR.
As a result, net->nc->info->load() also returns 1, this makes
vhost_net_start_one() incorrectly assume the device state is
successfully loaded by vhost_vdpa_net_load() and return 0, instead of
goto `fail` label to cancel the device startup, as vhost_net_start_one()
only cancels the device startup when net->nc->info->load() returns a
negative value.
This patch fixes this problem by returning -EIO when the device's
ack is not VIRTIO_NET_OK.
Fixes: 0b58d3686a ("vdpa: Add vhost_vdpa_net_load_offloads()")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <b0396b80e96322b86f1a0b10c098fc1edd947d72.1688438055.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to VirtIO standard, "The class, command and
command-specific-data are set by the driver,
and the device sets the ack byte.
There is little it can do except issue a diagnostic
if ack is not VIRTIO_NET_OK."
Therefore, QEMU should stop sending the queued SVQ commands and
cancel the device startup if the device's ack is not VIRTIO_NET_OK.
Yet the problem is that, vhost_vdpa_net_load_mq() returns 1 based on
`*s->status != VIRTIO_NET_OK` when the device's ack is VIRTIO_NET_ERR.
As a result, net->nc->info->load() also returns 1, this makes
vhost_net_start_one() incorrectly assume the device state is
successfully loaded by vhost_vdpa_net_load() and return 0, instead of
goto `fail` label to cancel the device startup, as vhost_net_start_one()
only cancels the device startup when net->nc->info->load() returns a
negative value.
This patch fixes this problem by returning -EIO when the device's
ack is not VIRTIO_NET_OK.
Fixes: f64c7cda69 ("vdpa: Add vhost_vdpa_net_load_mq")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <ec515ebb0b4f56368751b9e318e245a5d994fa72.1688438055.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to VirtIO standard, "The class, command and
command-specific-data are set by the driver,
and the device sets the ack byte.
There is little it can do except issue a diagnostic
if ack is not VIRTIO_NET_OK."
Therefore, QEMU should stop sending the queued SVQ commands and
cancel the device startup if the device's ack is not VIRTIO_NET_OK.
Yet the problem is that, vhost_vdpa_net_load_mac() returns 1 based on
`*s->status != VIRTIO_NET_OK` when the device's ack is VIRTIO_NET_ERR.
As a result, net->nc->info->load() also returns 1, this makes
vhost_net_start_one() incorrectly assume the device state is
successfully loaded by vhost_vdpa_net_load() and return 0, instead of
goto `fail` label to cancel the device startup, as vhost_net_start_one()
only cancels the device startup when net->nc->info->load() returns a
negative value.
This patch fixes this problem by returning -EIO when the device's
ack is not VIRTIO_NET_OK.
Fixes: f73c0c43ac ("vdpa: extract vhost_vdpa_net_load_mac from vhost_vdpa_net_load")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <a21731518644abbd0c495c5b7960527c5911f80d.1688438055.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_new() automatically retains a reference to a virtual function when
registering it so we need to release the reference when unregistering.
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230411090408.48366-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
There is also pci_new() which creates non-multifunction PCI devices.
Accordingly the parameter is always set to true when a multi function PCI
device is to be created.
The reason for the parameter's existence seems to be that it is used in the
internal PCI code as well which is the only location where it gets set to
false. This one usage can be resolved by factoring out an internal helper
function.
Remove this redundant, error-prone parameter.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230304114043.121024-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is also pci_create_simple() which creates non-multifunction PCI
devices. Accordingly the parameter is always set to true when a multi
function PCI device is to be created.
The reason for the parameter's existence seems to be that it is used in the
internal PCI code as well which is the only location where it gets set to
false. This one usage can be replaced by trivial code.
Remove this redundant, error-prone parameter.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230304114043.121024-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I440FX realization is currently mixed with PIIX3 creation. Furthermore, it is
common practice to only set properties between a device's qdev_new() and
qdev_realize(). Clean up to resolve both issues.
Since I440FX spawns a PCI bus let's also move the pci_bus initialization there.
Note that when running `qemu-system-x86_64 -M pc -S` before and after this
patch, `info mtree` in the QEMU console doesn't show any differences except that
the ordering is different.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-18-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
i440fx_init() is a legacy init function. The previous patches worked towards
TYPE_I440FX_PCI_HOST_BRIDGE to be instantiated the QOM way. Do this now by
transforming the parameters passed to i440fx_init() into property assignments.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-17-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
I440FX needs a different PCI device model if the "igd-passthru" property is
enabled. The type name is currently passed as a parameter to i440fx_init(). This
parameter will be replaced by a property assignment once i440fx_init() gets
resolved.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-16-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the properties in anticipation of QOM'ification; Q35 has the same
properties.
Note that we want to avoid a "ram size" property in the QOM interface since it
seems redundant to both properties introduced in this change. Thus the removal
of the ram_size parameter. We assume the invariant of both properties to sum up
to "ram size" which is already asserted in pc_memory_init(). Under Xen the
invariant seems to hold as well, so we now also check it there.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-15-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the property in anticipation of QOM'ification; Q35 has the same
property.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-14-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The goal is to eliminate i440fx_init() which is a legacy init function. This
neccessitates the memory regions to be properties, like in Q35, which will be
assigned in board code.
Since i440fx needs different PCI devices in Xen mode, and since i440fx shall
be self-contained, the PCI device will be created during realization of the
host. Thus the pointers need to be moved to the host structure to be usable as
properties.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-13-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
i440fx_realize() realizes the PCI device inside the host bridge
(PCII440FXState), but is implemented between i440fx_pcihost_realize() and
i440fx_init() which deal with the host bridge itself (I440FXState). Since we
want to append i440fx_init() to i440fx_pcihost_realize() later let's move
i440fx_realize() out of the way.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-12-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
`PCIHostState` is often referred to as `phb`, own device state usually as `s`.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-11-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-10-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The parent-child relation is usually established near a child's qdev_new(). For
i440fx this allows for reusing the machine parameter, thus avoiding
qdev_get_machine() which relies on a global variable.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-9-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eliminates an else branch.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-8-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Q35 PCI host already has a PCI_HOST_BYPASS_IOMMU property. However, the
host initializes this property itself by accessing global machine state,
thereby assuming it to be a PC machine. Avoid this by having board code
set this property.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a macro to avoid copy and pasting strings which can easily
cause typos.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230630073720.21297-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Q35 PCI host currently sets the PC machine's PCI bus attribute
through global state, thereby assuming the machine to be a PC machine.
The Q35 machine code already holds on to Q35's pci bus attribute, so can
easily set its own property while preserving encapsulation.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes the following clangd warning (-Winitializer-overrides):
q35.c:297:19: Initializer overrides prior initialization of this subobject
q35.c:292:19: previous initialization is here
Settle on little endian which is consistent with using pci_host_conf_le_ops.
Fixes: bafc90bdc5 ("q35: implement TSEG")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The variable is redundant to "phb" and is never used by its real type.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A device reset is issued per device, not per VQ. The legacy device reset
message, VHOST_USER_RESET_OWNER, is already a per device message. Therefore,
this change adds the proper message, VHOST_USER_RESET_DEVICE, to per device
messages.
Signed-off-by: Tom Lonergan <tom.lonergan@nutanix.com>
Message-Id: <20230628163927.108171-3-tom.lonergan@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Some devices, like virtio-scsi, consist of one vhost_dev, while others, like
virtio-net, contain multiple vhost_devs. The QEMU vhost-user code has a
concept of one-time messages which is misleading. One-time messages are sent
once per operation on the device, not once for the lifetime of the device.
Therefore, as discussed in [1], vhost_user_one_time_request should be
renamed to vhost_user_per_device_request and the relevant comments updated
to match the real functionality.
[1] https://lore.kernel.org/qemu-devel/20230127083027-mutt-send-email-mst@kernel.org/
Signed-off-by: Tom Lonergan <tom.lonergan@nutanix.com>
Message-Id: <20230628163927.108171-2-tom.lonergan@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
>From SMBIOS 3.0 specification, core count field means:
Core Count is the number of cores detected by the BIOS for this
processor socket. [1]
Before 003f230e37 ("machine: Tweak the order of topology members in
struct CpuTopology"), MachineState.smp.cores means "the number of cores
in one package", and it's correct to use smp.cores for core count.
But 003f230e37 changes the smp.cores' meaning to "the number of cores
in one die" and doesn't change the original smp.cores' use in smbios as
well, which makes core count in type4 go wrong.
Fix this issue with the correct "cores per socket" caculation.
[1] SMBIOS 3.0.0, section 7.5.6, Processor Information - Core Count
Fixes: 003f230e37 ("machine: Tweak the order of topology members in struct CpuTopology")
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20230628135437.1145805-5-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
>From SMBIOS 3.0 specification, thread count field means:
Thread Count is the total number of threads detected by the BIOS for
this processor socket. It is a processor-wide count, not a
thread-per-core count. [1]
So here we should use threads per socket other than threads per core.
[1] SMBIOS 3.0.0, section 7.5.8, Processor Information - Thread Count
Fixes: c97294ec1b ("SMBIOS: Build aggregate smbios tables and entry point")
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20230628135437.1145805-4-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
smp.sockets is the number of sockets which is configured by "-smp" (
otherwise, the default is 1). Trying to recalculate it here with another
rules leads to errors, such as:
1. 003f230e37 ("machine: Tweak the order of topology members in struct
CpuTopology") changes the meaning of smp.cores but doesn't fix
original smp.cores uses.
With the introduction of cluster, now smp.cores means the number of
cores in one cluster. So smp.cores * smp.threads just means the
threads in a cluster not in a socket.
2. On the other hand, we shouldn't use smp.cpus here because it
indicates the initial number of online CPUs at the boot time, and is
not mathematically related to smp.sockets.
So stop reinventing the another wheel and use the topo values that
has been calculated.
Fixes: 003f230e37 ("machine: Tweak the order of topology members in struct CpuTopology")
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20230628135437.1145805-3-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The number of cores/threads per socket are needed for smbios, and are
also useful for other modules.
Provide the helpers to wrap the calculation of cores/threads per socket
so that we can avoid calculation errors caused by other modules miss
topology changes.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20230628135437.1145805-2-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't have a virtio-scmi implementation in QEMU and only support a
vhost-user backend. This is very similar to virtio-gpio and we add the same
set of tests, just passing some vhost-user messages over the control socket.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230628100524.342666-4-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows is to instantiate a vhost-user-scmi device as part of a PCI bus.
It is mostly boilerplate similar to the other vhost-user-*-pci boilerplates
of similar devices.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Message-Id: <20230628100524.342666-3-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This creates the QEMU side of the vhost-user-scmi device which connects to
the remote daemon. It is based on code of similar vhost-user devices.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Message-Id: <20230628100524.342666-2-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement the frontend side of the get_edid feature in the qemu
vhost-user-gpu frontend device.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230626164708.1163239-5-ernunes@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement the virtio-gpu feature in contrib/vhost-user-gpu, which was
unsupported until now.
In this implementation, the feature is enabled inconditionally to avoid
creating another optional config argument.
Similarly to get_display_info, vhost-user-gpu sends a message back to
the frontend to have access to all the display information. In the
case of get_edid, it also needs to pass which scanout we should
retrieve the edid for.
The VHOST_USER_GPU_PROTOCOL_F_EDID protocol feature is required if the
frontend sets the VIRTIO_GPU_F_EDID virtio-gpu feature. If the frontend
sets the virtio-gpu feature but does not support the protocol feature,
the backend will abort with an error.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230626164708.1163239-4-ernunes@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VHOST_USER_GPU_GET_EDID is defined as a message from the backend to the
frontend to retrieve the EDID data for a given scanout.
The VHOST_USER_GPU_PROTOCOL_F_EDID protocol feature is defined as a way
to check whether this new message is supported or not.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230626164708.1163239-3-ernunes@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This functionality can be shared with upcoming use in vhost-user-gpu, so
move it to the shared file to avoid duplicating it.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230626164708.1163239-2-ernunes@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If vhost is enabled for virtio-net, Device-TLB enable/disable events
must be passed to vhost for proper IOMMU unmap flag selection.
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230626091258.24453-3-viktor@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The guest can disable or never enable Device-TLB. In these cases,
it can't be used even if enabled in QEMU. So, check Device-TLB state
before registering IOMMU notifier and select unmap flag depending on
that. Also, implement a way to change IOMMU notifier flag if Device-TLB
state is changed.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2001312
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230626091258.24453-2-viktor@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is always 0 and it is not useful to route call through file
descriptor.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230526153736.472443-1-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Fixes in error handling paths of VFIO PCI devices
* Improvements of reported errors for VFIO migration
* Linux header update
* Enablement of AtomicOps completers on root ports
* Fix for unplug of passthrough AP devices
-----BEGIN PGP SIGNATURE-----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=U2Hc
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20230710' of https://github.com/legoater/qemu into staging
vfio queue:
* Fixes in error handling paths of VFIO PCI devices
* Improvements of reported errors for VFIO migration
* Linux header update
* Enablement of AtomicOps completers on root ports
* Fix for unplug of passthrough AP devices
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmSrug0ACgkQUaNDx8/7
# 7KHYCRAAt6UeZi8nKPlN+cs6guOagCcAJOu13nm7XN0bFxjYf/Q2t618cpM7PLSk
# h+4VGsMUVJ1dumcCkBmv7LAn0G6CpVR3VDi5QuGfMODRhpWfSoaypPIizRgrbarL
# lSyaVaPIaddlDZ4AIfFA9Ebnytvm5/ecsyTr0cv7OejVKWI/jN6bC/v36AmNQKKQ
# J5RCDpQ6fOsdqf0Dzvn7xjuHRE4DYtsWkVoslDoBQMgPWHLF8UwRu/OPD6cBQYAR
# /fmgoOkkNDMdN3laqwAyfAUjKfOFpLuZzJ5KNFjtkBiktm66dw4Y8/lWoChVR+S6
# PRZ3nk0HxyzB96zCytfggBX905PBD54LIuockRaYKTlTxT19C3fDjDz5tsjKNhLR
# aFec4KiJaUJj0fa/Vw8DB/WUbCgbOXGHiWhY8vNdpVoc9AZe8xj9z4nB3hmzx1i/
# lZhsM/s3kTNHpVGlW7vTfbToFBmt1eoglu+ILe/HeHLi8LjzCsHy+wR5c0n0/HVI
# fLUuUS1AGQvi8+HCCUi7gwzpJkl4rPJsPx51wfXJk+q/3GQ8g9Mg9qotHNHm4N60
# zq/I5VqqEkJzdaMjup04ZqsMAWqGrnU2f4aNPvBhgaeO9CQE/buIsA34buQRwiG4
# wTodqm0jrkx0Z59jliZ0mFU/LxMvhMaQCEh+OdyZ9vRtfLBjF4c=
# =U2Hc
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Jul 2023 08:58:05 AM BST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20230710' of https://github.com/legoater/qemu:
vfio/pci: Enable AtomicOps completers on root ports
pcie: Add a PCIe capability version helper
s390x/ap: Wire up the device request notifier interface
linux-headers: update to v6.5-rc1
vfio: Fix null pointer dereference bug in vfio_bars_finalize()
vfio/migration: Return bool type for vfio_migration_realize()
vfio/migration: Remove print of "Migration disabled"
vfio/migration: Free resources when vfio_migration_realize fails
vfio/migration: Change vIOMMU blocker from global to per device
vfio/pci: Disable INTx in vfio_realize error path
hw/vfio/pci-quirks: Sanitize capability pointer
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Dynamically enable Atomic Ops completer support around realize/exit of
vfio-pci devices reporting host support for these accesses and adhering
to a minimal configuration standard. While the Atomic Ops completer
bits in the root port device capabilities2 register are read-only, the
PCIe spec does allow RO bits to change to reflect hardware state. We
take advantage of that here around the realize and exit functions of
the vfio-pci device.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Robin Voetter <robin@streamhpc.com>
Tested-by: Robin Voetter <robin@streamhpc.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Report the PCIe capability version for a device
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Robin Voetter <robin@streamhpc.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
vfio_realize() has the following flow:
1. vfio_bars_prepare() -- sets VFIOBAR->size.
2. msix_early_setup().
3. vfio_bars_register() -- allocates VFIOBAR->mr.
After vfio_bars_prepare() is called msix_early_setup() can fail. If it
does fail, vfio_bars_register() is never called and VFIOBAR->mr is not
allocated.
In this case, vfio_bars_finalize() is called as part of the error flow
to free the bars' resources. However, vfio_bars_finalize() calls
object_unparent() for VFIOBAR->mr after checking only VFIOBAR->size, and
thus we get a null pointer dereference.
Fix it by checking VFIOBAR->mr in vfio_bars_finalize().
Fixes: 89d5202edc ("vfio/pci: Allow relocating MSI-X MMIO")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Make vfio_migration_realize() adhere to the convention of other realize()
callbacks(like qdev_realize) by returning bool instead of int.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Suggested-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
