This change is a workaround for a bug where mstatus.FS
is not correctly reporting dirty after operations that
modify floating point registers. This a critical bug
or RISC-V in QEMU as it results in floating point
register file corruption when running SMP Linux due to
task migration and possibly uniprocessor Linux if
more than one process is using the FPU.
This workaround will return dirty if mstatus.FS is
switched from off to initial or clean. According to
the specification it is legal for an implementation
to return only off, or dirty.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
- Model borrowed from target/sh4/cpu.c
- Rewrote riscv_cpu_list to use object_class_get_list
- Dropped 'struct RISCVCPUInfo' and used TypeInfo array
- Replaced riscv_cpu_register_types with DEFINE_TYPES
- Marked base class as abstract
- Fixes -cpu list
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Re-run Coccinelle script scripts/coccinelle/err-bad-newline.cocci,
and found new error_report() occurrences with '\n'.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20180323143202.28879-3-lvivier@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The value of CCOUNT special register is calculated as time elapsed
since CCOUNT == 0 multiplied by the core frequency. In icount mode time
increment between consecutive instructions that don't involve time
warps is constant, but unless the result of multiplication of this
constant by the core frequency is a whole number the CCOUNT increment
between these instructions may not be constant. E.g. with icount=7 each
instruction takes 128ns, with core clock of 10MHz CCOUNT values for
consecutive instructions are:
502: (128 * 502 * 10000000) / 1000000000 = 642.56
503: (128 * 503 * 10000000) / 1000000000 = 643.84
504: (128 * 504 * 10000000) / 1000000000 = 645.12
I.e.the CCOUNT increments depend on the absolute time. This results in
varying CCOUNT differences for consecutive instructions in tests that
involve time warps and don't set CCOUNT explicitly.
Change frequency of the core used in tests so that clock cycle takes
exactly 64ns. Change icount power used in tests to 6, so that each
instruction takes exactly 1 clock cycle. With these changes CCOUNT
increments only depend on the number of executed instructions and that's
what timer tests expect, so they work correctly.
Longer story:
http://lists.nongnu.org/archive/html/qemu-devel/2018-03/msg04326.html
Cc: Pavel Dovgaluk <Pavel.Dovgaluk@ispras.ru>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Change #include <xtensa-isa.h> to #include "xtensa-isa.h" in imported
files to make references to local files consistent.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Fix definitions of existing cores and core importing script to follow
the rule of naming non-top level source files.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
A recent glibc change relies on the fact that the iaoq must be 3,
and computes an address based on that. QEMU had been ignoring the
priv level for user-only, which produced an incorrect address.
Reported-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This removes the additional call to WHvGetVirtualProcessorRegisters in
whpx_vcpu_post_run now that the WHV_VP_EXIT_CONTEXT is returned in all
WHV_RUN_VP_EXIT_CONTEXT structures.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1521039163-138-4-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a breaking change to WHvSetPartitionProperty to pass the 'in'
PropertyCode on function invocation introduced in Windows Insider SDK 17110.
Usage of this indicates the PropertyCode of the opaque PropertyBuffer passed in
on function invocation.
Also fixes the removal of the PropertyCode parameter from the
WHV_PARTITION_PROPERTY struct as it is now passed to the function directly.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1521039163-138-3-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a breaking change to WHvGetCapability to include the 'out'
WrittenSizeInBytes introduced in Windows Insider SDK 17110.
This specifies on return the safe length to read into the WHV_CAPABILITY
structure passed to the call.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1521039163-138-2-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For debug exceptions due to breakpoints or the BKPT instruction which
are taken to AArch32, the Fault Address Register is architecturally
UNKNOWN. We were using that as license to simply not set
env->exception.vaddress, but this isn't correct, because it will
expose to the guest whatever old value was in that field when
arm_cpu_do_interrupt_aarch32() writes it to the guest IFSR. That old
value might be a FAR for a previous guest EL2 or secure exception, in
which case we shouldn't show it to an EL1 or non-secure exception
handler. It might also be a non-deterministic value, which is bad
for record-and-replay.
Clear env->exception.vaddress before taking breakpoint debug
exceptions, to avoid this minor information leak.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180320134114.30418-5-peter.maydell@linaro.org
Now that we have a helper function specifically for the BRK and
BKPT instructions, we can set the exception.fsr there rather
than in arm_cpu_do_interrupt_aarch32(). This allows us to
use our new arm_debug_exception_fsr() helper.
In particular this fixes a bug where we were hardcoding the
short-form IFSR value, which is wrong if the target exception
level has LPAE enabled.
Fixes: https://bugs.launchpad.net/qemu/+bug/1756927
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180320134114.30418-4-peter.maydell@linaro.org
When a debug exception is taken to AArch32, it appears as a Prefetch
Abort, and the Instruction Fault Status Register (IFSR) must be set.
The IFSR has two possible formats, depending on whether LPAE is in
use. Factor out the code in arm_debug_excp_handler() which picks
an FSR value into its own utility function, update it to use
arm_fi_to_lfsc() and arm_fi_to_sfsc() rather than hard-coded constants,
and use the correct condition to select long or short format.
In particular this fixes a bug where we could select the short
format because we're at EL0 and the EL1 translation regime is
not using LPAE, but then route the debug exception to EL2 because
of MDCR_EL2.TDE and hand EL2 the wrong format FSR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180320134114.30418-3-peter.maydell@linaro.org
The MDCR_EL2.TDE bit allows the exception level targeted by debug
exceptions to be set to EL2 for code executing at EL0. We handle
this in the arm_debug_target_el() function, but this is only used for
hardware breakpoint and watchpoint exceptions, not for the exception
generated when the guest executes an AArch32 BKPT or AArch64 BRK
instruction. We don't have enough information for a translate-time
equivalent of arm_debug_target_el(), so instead make BKPT and BRK
call a special purpose helper which can do the routing, rather than
the generic exception_with_syndrome helper.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180320134114.30418-2-peter.maydell@linaro.org
In OE project 4.15 linux kernel boot hang was observed under
single cpu aarch64 qemu. Kernel code was in a loop waiting for
vtimer arrival, spinning in TC generated blocks, while interrupt
was pending unprocessed. This happened because when qemu tried to
handle vtimer interrupt target had interrupts disabled, as
result flag indicating TCG exit, cpu->icount_decr.u16.high,
was cleared but arm_cpu_exec_interrupt function did not call
arm_cpu_do_interrupt to process interrupt. Later when target
reenabled interrupts, it happened without exit into main loop, so
following code that waited for result of interrupt execution
run in infinite loop.
To solve the problem instructions that operate on CPU sys state
(i.e enable/disable interrupt), and marked as DISAS_UPDATE,
should be considered as DISAS_EXIT variant, and should be
forced to exit back to main loop so qemu will have a chance
processing pending CPU state updates, including pending
interrupts.
This change brings consistency with how DISAS_UPDATE is treated
in aarch32 case.
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Alex Bennée <alex.bennee@linaro.org>
CC: qemu-stable@nongnu.org
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1521526368-1996-1-git-send-email-kamensky@cisco.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit 46a99c9f73 ("s390x/cpumodel: model PTFF subfunctions
for Multiple-epoch facility") -cpu help no longer shows the MSA8
feature group. Turns out that we forgot to add the new MEPOCH_PTFF
group enum.
Fixes: 46a99c9f73 ("s390x/cpumodel: model PTFF subfunctions for Multiple-epoch facility")
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Found thanks to ASAN:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x7efe20417a38 in __interceptor_calloc (/lib64/libasan.so.4+0xdea38)
#1 0x7efe1f7b2f75 in g_malloc0 ../glib/gmem.c:124
#2 0x7efe1f7b3249 in g_malloc0_n ../glib/gmem.c:355
#3 0x558272879162 in sev_get_info /home/elmarco/src/qemu/target/i386/sev.c:414
#4 0x55827285113b in hmp_info_sev /home/elmarco/src/qemu/target/i386/monitor.c:684
#5 0x5582724043b8 in handle_hmp_command /home/elmarco/src/qemu/monitor.c:3333
Fixes: 63036314
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180319175823.22111-1-marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This version uses a constant size memory buffer sized for
the maximum possible ISA string length. It also uses g_new
instead of g_new0, uses more efficient logic to append
extensions and adds manual zero termination of the string.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMM: Use qemu_tolower() rather than tolower()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SRC_EA() and gen_extend() can return either a temporary
TCGv or a memory allocated one. Mark them when they are
allocated, and free them automatically at end of the
instruction translation.
We want to free locally allocated TCGv to avoid
overflow in sequence like:
0xc00ae406: movel %fp@(-132),%fp@(-268)
0xc00ae40c: movel %fp@(-128),%fp@(-264)
0xc00ae412: movel %fp@(-20),%fp@(-212)
0xc00ae418: movel %fp@(-16),%fp@(-208)
0xc00ae41e: movel %fp@(-60),%fp@(-220)
0xc00ae424: movel %fp@(-56),%fp@(-216)
0xc00ae42a: movel %fp@(-124),%fp@(-252)
0xc00ae430: movel %fp@(-120),%fp@(-248)
0xc00ae436: movel %fp@(-12),%fp@(-260)
0xc00ae43c: movel %fp@(-8),%fp@(-256)
0xc00ae442: movel %fp@(-52),%fp@(-276)
0xc00ae448: movel %fp@(-48),%fp@(-272)
...
That can fill a lot of TCGv entries in a sequence,
especially since 15fa08f845 ("tcg: Dynamically allocate TCGOps")
we have no limit to fill the TCGOps cache and we can fill
the entire TCG variables array and overflow it.
Suggested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180319113544.704-3-laurent@vivier.eu>
This parameter will be needed to manage automatic release
of temporary allocated TCG variables.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180319113544.704-2-laurent@vivier.eu>
Intel processor trace should be disabled when
CPUID.(EAX=14H,ECX=0H).ECX.[bit31] is set.
Generated packets which contain IP payloads will have LIP
values when this bit is set, or IP payloads will have RIP
values.
Currently, The information of CPUID 14H is constant to make
live migration safty and this bit is always 0 in guest even
if host support LIP values.
Guest sees the bit is 0 will expect IP payloads with RIP
values, but the host CPU will generate IP payloads with
LIP values if this bit is set in HW.
To make sure the value of IP payloads correctly, Intel PT
should be disabled when bit[31] is set.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Message-Id: <1520969191-18162-1-git-send-email-luwei.kang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch was generated using the following Coccinelle script:
@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)
and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
both do nothing as for the first all callers
parse_cpu_model() and qmp_query_cpu_model_()
should provide non NULL value, so just abort if it's not so.
While at it drop cpu_common_class_by_name() which is not need
any more as every target has CPUClass::class_by_name callback
by now, though abort in case a new arch will forget to define one.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1518013857-4372-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
cpu_init(cpu_model) were replaced by cpu_create(cpu_type) so
no users are left, remove it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc)
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1518000027-274608-6-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
it will be used for providing to cpu name resolving class for
parsing cpu model for system and user emulation code.
Along with change add target to null-machine tests, so
that when switch to CPU_RESOLVING_TYPE happens,
it would ensure that null-machine usecase still works.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu> (m68k)
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc)
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> (tricore)
Message-Id: <1518000027-274608-4-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Added macro to riscv too]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
tlbsync also needs to check the Guest Translation Shootdown Enable
(GTSE) bit in the Logical Partition Control Register (LPCR) to
determine at which privilege level it is running.
See commit c6fd28fd57 ("target/ppc: Update tlbie to check privilege
level based on GTSE")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- small cleanup for xtensa registers dumping (-d cpu);
- add support for debugging linux-user process with xtensa-linux-gdb
(as opposed to xtensa-elf-gdb), which can only access unprivileged
registers;
- enable MTTCG for target/xtensa;
- cleanup in linux-user/mmap area making sure that it works correctly
with limited 30-bit-wide user address space;
- import xtensa-specific definitions from the linux kernel,
conditionalize user-only/softmmu-only code and add handlers for
signals, exceptions, process/thread creation and core registers dumping.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAlqr9NsTHGpjbXZia2Jj
QGdtYWlsLmNvbQAKCRBR+cyR+D+gRHjDD/9dQxuirsTjU+oO2OMU5YjDBF6Hy+KA
O4hJoWh/jNyUzgZOAtmpbZmuB1GJ5gNDhl5lifEFIWtAqf/qi/M87ibCQbdjFQ+t
sT+FVgSU9X16J9wBKtUPV4DBMeMvJenHtFlCCw6oZxF5cnqGXw7e4yQtn7/KI8jT
ymu7hiCaGJJ4ao/FG8KbIs3iSpQcfbIN7kEfuL92tMNjVWWTnNVhPVxyg3Bojkib
pRFELL/BO3Ud3P83BncA5TNp6O1rFwKRYBK9nwLGWrjFMEbomdT5LWSZuZK9UVN9
aLoC/GnvGCnvAth8E4L0dDOmyz9MRDJ5rYJoaxoEVYzvz8rexVyAjpC/zOrJVxuK
xrgandQtrFGkp5NJD6QpM92b7YDyR1w1s24KlehZivzHoN83cN3CuCHLWcqgicza
/x4r/OQ4uiSUTex2Cg2hVQJR6m1LkJKa94Mimrd7G/zCHSF/BDks170o5DpW7JT8
QWfYTtZg13auzPsgZmGE+/b1o5PBXhnlBPzD983X6u5cgS5RWyik3jhmp5rEx8wH
sxV5kvMb96JlUDCuwPTu9zJhJ3rqbWtCR7+4Sh1PCcsr6vVgsV0EZHAapwrG5GPp
pOxLlZ54ObK3oSW6SB8TnS1rEiGkBHMhSL1O6VdKOvAXFPCVZsIGBGTpuf6MEn6c
hRg0iBGQ6GMUUw==
=UCny
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xtensa/tags/20180316-xtensa' into staging
target/xtensa linux-user support.
- small cleanup for xtensa registers dumping (-d cpu);
- add support for debugging linux-user process with xtensa-linux-gdb
(as opposed to xtensa-elf-gdb), which can only access unprivileged
registers;
- enable MTTCG for target/xtensa;
- cleanup in linux-user/mmap area making sure that it works correctly
with limited 30-bit-wide user address space;
- import xtensa-specific definitions from the linux kernel,
conditionalize user-only/softmmu-only code and add handlers for
signals, exceptions, process/thread creation and core registers dumping.
# gpg: Signature made Fri 16 Mar 2018 16:46:19 GMT
# gpg: using RSA key 51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044
* remotes/xtensa/tags/20180316-xtensa:
MAINTAINERS: fix W: address for xtensa
qemu-binfmt-conf.sh: add qemu-xtensa
target/xtensa: add linux-user support
linux-user: drop unused target_msync function
linux-user: fix target_mprotect/target_munmap error return values
linux-user: fix assertion in shmdt
linux-user: fix mmap/munmap/mprotect/mremap/shmat
target/xtensa: support MTTCG
target/xtensa: use correct number of registers in gdbstub
target/xtensa: mark register windows in the dump
target/xtensa: dump correct physical registers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# linux-user/syscall.c
Import list of syscalls from the kernel source. Conditionalize code/data
that is only used with softmmu. Implement exception handlers. Implement
signal hander (only the core registers for now, no coprocessors or TIE).
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
=UAgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
tcg: fix cpu_io_recompile
replay: update documentation
replay: save vmstate of the asynchronous events
replay: don't process async events when warping the clock
scripts/replay-dump.py: replay log dumper
replay: avoid recursive call of checkpoints
replay: check return values of fwrite
replay: push replay_mutex_lock up the call tree
replay: don't destroy mutex at exit
replay: make locking visible outside replay code
replay/replay-internal.c: track holding of replay_lock
replay/replay.c: bump REPLAY_VERSION again
replay: save prior value of the host clock
replay: added replay log format description
replay: fix save/load vm for non-empty queue
replay: fixed replay_enable_events
replay: fix processing async events
cpu-exec: fix exception_index handling
hw/i386/pc: Factor out the superio code
hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/i386-softmmu.mak
# default-configs/x86_64-softmmu.mak
* Update kernel headers (Gerd, myself)
* SEV support (Brijesh)
I have not tested non-x86 compilation, but I reordered the SEV patches
so that all non-x86-specific changes go first to catch any possible
issues (which weren't there anyway :)).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJap/4yAAoJEL/70l94x66DmPoH/igfzYkxFyIHFqzb/hQEut3e
IJA05u9DBSqqdSvL0UeLdUgyJTeDM3S5kKZqZ38BPHIudwOGtydoIM2utWtPSejf
Z+mS77+dSgchEMgf1gxmD0oZ5TrO/2pdOYfaZZuQuGmGLruKsDgz6vH3F87cfk8b
yJSJkoZkFc8C9SpwQERWYuhXn2fYFxSBFgEMc9xSFN+zqQUFqeIfOJhwZ+txjAUl
y1EKlhhVyjkxTLR++SkzhKIJ8D5cycpcY/H19gw3ghHviY/tGwNLot3bLRPbwCM6
QvrXDf4rhvFHTmmOfliCI5y6Xgj0u7IZv2fVoKXEtKk1qyfyD4ZnouYTaqP/U9I=
=Q4/y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-sev' into staging
* Migrate MSR_SMI_COUNT (Liran)
* Update kernel headers (Gerd, myself)
* SEV support (Brijesh)
I have not tested non-x86 compilation, but I reordered the SEV patches
so that all non-x86-specific changes go first to catch any possible
issues (which weren't there anyway :)).
# gpg: Signature made Tue 13 Mar 2018 16:37:06 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream-sev: (22 commits)
sev/i386: add sev_get_capabilities()
sev/i386: qmp: add query-sev-capabilities command
sev/i386: qmp: add query-sev-launch-measure command
sev/i386: hmp: add 'info sev' command
cpu/i386: populate CPUID 0x8000_001F when SEV is active
sev/i386: add migration blocker
sev/i386: finalize the SEV guest launch flow
sev/i386: add support to LAUNCH_MEASURE command
target/i386: encrypt bios rom
sev/i386: add command to encrypt guest memory region
sev/i386: add command to create launch memory encryption context
sev/i386: register the guest memory range which may contain encrypted data
sev/i386: add command to initialize the memory encryption context
include: add psp-sev.h header file
sev/i386: qmp: add query-sev command
target/i386: add Secure Encrypted Virtualization (SEV) object
kvm: introduce memory encryption APIs
kvm: add memory encryption context
docs: add AMD Secure Encrypted Virtualization (SEV)
machine: add memory-encryption option
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- emit TCG barriers for MEMW, EXTW, S32RI and L32AI;
- do atomic_cmpxchg_i32 for S32C1I.
Cc: Emilio G. Cota <cota@braap.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
System emulation should provide access to all registers, userspace
emulation should only provide access to unprivileged registers.
Record register flags from GDB register map definition, calculate both
num_regs and num_core_regs if either is zero. Use num_regs in system
emulation, num_core_regs in userspace emulation gdbstub.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add arrows that mark beginning of register windows and position of the
current window in the windowed register file.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa_cpu_dump_state outputs CPU physical registers as is, without
synchronization from current window. That may result in different values
printed for the current window and corresponding physical registers.
Synchronize physical registers from window before dumping.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The function can be used to get the current SEV capabilities.
The capabilities include platform diffie-hellman key (pdh) and certificate
chain. The key can be provided to the external entities which wants to
establish a trusted channel between SEV firmware and guest owner.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command can be used by libvirt to query the SEV capabilities.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command can be used by libvirt to retrieve the measurement of SEV guest.
This measurement is a signature of the memory contents that was encrypted
through the LAUNCH_UPDATE_DATA.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command can be used to show the SEV information when memory
encryption is enabled on AMD platform.
Cc: Eric Blake <eblake@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When SEV is enabled, CPUID 0x8000_001F should provide additional
information regarding the feature (such as which page table bit is used
to mark the pages as encrypted etc).
The details for memory encryption CPUID is available in AMD APM
(https://support.amd.com/TechDocs/24594.pdf) Section E.4.17
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV guest migration is not implemented yet.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV launch flow requires us to issue LAUNCH_FINISH command before guest
is ready to run.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
During machine creation we encrypted the guest bios image, the
LAUNCH_MEASURE command can be used to retrieve the measurement of
the encrypted memory region. This measurement is a signature of
the memory contents that can be sent to the guest owner as an
attestation that the memory was encrypted correctly by the firmware.
VM management tools like libvirt can query the measurement using
query-sev-launch-measure QMP command.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The KVM_SEV_LAUNCH_UPDATE_DATA command is used to encrypt a guest memory
region using the VM Encryption Key created using LAUNCH_START.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The KVM_SEV_LAUNCH_START command creates a new VM encryption key (VEK).
The encryption key created with the command will be used for encrypting
the bootstrap images (such as guest bios).
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
